International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395 -0056
Volume: 04 Issue: 04 | Apr -2017
p-ISSN: 2395-0072
www.irjet.net
AUTOMATIC STREET LIGHT Sachin Sharma1, Neeraj Tripathi2, Shubham Goyal3 ,Saurabh Singh4 1Sachin
Sharma, Student, Dept. Of EC, IMS Engineering College, Ghaziabad, UP, India Tripathi, Student, Dept. Of EC, IMS Engineering College, Ghaziabad, UP, India 3Shubham Goyal, Student, Dept. Of EC, IMS Engineering College, Ghaziabad, UP, India 4Saurabh Singh, Student, Dept. Of EC, IMS Engineering College, Ghaziabad, UP, India 2Neeraj
------------------------------------------------------------***-----------------------------------------------------------------------------2. PROJECT METHODOLOGY Abstract Energy can neither be created nor destroyed, it can only be converted from one form to i.MPLAB IDE:is a free, integrated tool set for the another ,due to this energy conservation is required to development of embedded applications. It is called an make the balance,it is necessary to make a system in Integrated Development Environment, or IDE, because it street lights by which the energy requirement is provides a single integrated environment to develop code reduced.The Intelligent Street Light system has for embedded microcontrollers. following features: Ultrasonic Sensor is used to detect the upcoming object, whenever any object is detected ii. ARDUINO IDE: The Arduino Software (IDE) is an open the lights are made to turn on .Range of the Ultrasonic source software and it makes easy to the code and upload is set so that the lights adjacent to the moving object it to the board. It runs on the different plant from will only be turned on remaining will be off. Ultrasonic Windows, MAC OS, Linux. The environment is written in sensor is connected with Arduino microcontroller. The Java and before running the IDE Java software to be Arduino is connected with LED’s of the street lights installed on the machine this software can be used with .The microcontroller is coded such as whenever the input from sensor is detected lights will be ON. This any Arduino board. project gives solution for electrical power wastage. As iii. OrCAD: OrCAD In general offers a total solution for core soon as the obstacle goes away the light gets switched design schematic and PCB layout. The Capture program OFF as the sensor sense any object at the same time includes a project wizard that provides an easy method for the status (ON/OFF) of the street light can be accessed creating a project, complete with library and simulation from anywhere and anytime through internet. resources.
Keywords:Ultrasonicsensor,Arduino,Microcontroller, FRC cable,Transistor BC548,LED’s.
3.FEATURES The intelligent street light control system uses the inputs from the ultra sonic sensor connected to microcontroller. The Arduino microcontroller, controls the street lights through an embedded system. Printed Circuit Board(ZERO PCB)is used to implement entire circuit.
1.INTRODUCTION A large amount of energy expenses for a city comes from street lights. An Intelligent Street Light system can cut municipal street lighting costs as much as 50%-70%.The street light controller should be installed on the pole lights which consist of arduino microcontroller along with ultrasonic sensor .It will control LED street lighting depending on traffic flow, communicate data between each street light. The data from the street light controller can be transferred to base station using wireless technology to monitor the system .According to requirement, the control system will switch ON/OFF the light at required timings and can also vary the intensity of the street lights.
Fig.1. Street Light Control System
© 2017, IRJET
|
Impact Factor value: 5.181
|
ISO 9001:2008 Certified Journal
|
Page 851