International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395 -0056
Volume: 04 Issue: 03 | Mar -2017
p-ISSN: 2395-0072
www.irjet.net
Vehicle Tracking System for School Bus by Arduino Supriya A Salunke1, Vitthal B. Jagtap2, Avinash D Harale3 1Solapur
University, Department of Electronics
SKN Sinhgad College of Engineering, Pandharpur, Solapur,India. 2Pune
University, Department of Electronics
S.B Patil College of Engineering,Indapur, Pune, India. 3Solapur
University, Department of Electronics,
SKN Sinhgad College of Engineering, Pandharpur, Solapur,India. ---------------------------------------------------------------------------------------------------------------------------------------Abstract: Global Positioning System (GPS) is becoming widely used for tracking and monitoring vehicles. The
Keywords: GPS and GPRS shield, Arduino uno board ,GPS Antenna, GPRS antenna
system has been use for tracking vehicle in real time using GPRS (General Packet Radio Service) technology.
1. INTRODUCTION
The systems provide the possibility of tracking the
The aim of this project is to design & develop a vehicle
location of vehicles at an affordable cost.
tracking system using GPRS which can be easily
A vehicle tracking system can be enables the fleet
controlled by arduino uno. In this modern, fast moving
operator to find out the location of the vehicle
and insecure world, it is became a basic necessity to be
throughout the journey of the vehicle. The system has
aware of one’s safety. The number of vehicles also
provided GPS-GPRS based vehicle tracking system. The
increases on roads and highways. The proposed
current position of the vehicle has been acquire by GPS
system is a GPS based real time vehicle tracking
device which is integrating into the target vehicle and
system, is used for security applications as well as any
the location coordinates can sent through GPRS, it
organization that maintains a large fleet and wants
provide by the GSM network. The GPS receiver is used to
accurate real-time information about vehicle position.
give latitude and longitude of the current location. The proposed system can be built using the microcontroller. This is the heart of the system. The GPS receiver connecting to microcontroller through the serial port and used to obtain the current location. The GPS receiver acquires the current position of the location and this information of vehicle transmits to tracking server using GPRS modem. GPRS provide TCP/IP connection with tracking server. Tracking server receives vehicle location information via network and stores this information in database. This information is available to authorized users of the system over the internet on map.
© 2017, IRJET
|
For the implementation of this system use navigational technologies such as GPS, GPRS and database technologies.The system will be installing in a vehicle to allow the owner to track the vehicle’s location, this system will use GPS and GPRS module. Global Positioning System can determine the precise location of a vehicle.The GPS antenna present in the GPS receiver module receives the information from the GPS satellite in NMEA (National Marine Electronics Association) format and this information transmits to a server using GPRS module. GPRS provide TCP/IP connection with tracking server. Tracking server has
Impact Factor value: 5.181
|
Page 2179