International Research Journal of Engineering and Technology (IRJET) Volume: 04 Issue: 03 | Mar -2017
e-ISSN: 2395 -0056
www.irjet.net
p-ISSN: 2395-0072
UTILIZATION OF EXHAUST GAS OF VEHICLE FOR ELECTRICITY GENERATION Shaikh Mobin A.1,Shaikh Saif A.2, Shaikh Najim N.3, Pathan Umar Farooq O.4,Pathan Farhan A.5 1234Student,Dept. of Mechanical Engineering, G.H. Raisoni College of Engineering and Management, Ahmednagar, India Email-mubin1112@gmail.com Mob.-+918275391196/+919892646888 5HOD,Dept. of Mechanical Engineering, G.H. Raisoni College of Engineering and Management, Ahmednagar, India. Email-farhanpathan@raisoni.net *** ABSTRACT- Energy means capacity to do work. There are various types of energy available in the environment which is made by conventional and non conventional energy sources. The all forms of energies are required for doing various mechanical operations, But now there is large problem of electricity due to low availability energy resources. So in villages there is no maximum electric supply for doing simple operations such as mobile charging power for lamps etc. By taking above factors we made the model which can produces electric power by using kinetic energy of exhaust gas of vehicle specially by two wheeler. When the model is in working condition, the runner rotates due kinetic energy of exhaust gas. This runner is attach to large gear by using shaft which further attach to small gear, placed on dynamo finally dynamo produces electric power. This is simple in construction due to it made by local available material. Key Words : electricity Generation, Exhaust Gas, Kinetic Energy,
1. INTRODUCTION
Energy means capacity to do work. There are various types of energy available in the environment which is made
|
Impact Factor value: 5.181
By taking above factors we have made the model which produce electric power by using exhaust gas of vehicle specially two wheeler. In the model, by using kinetic energy of exhaust gas the runner rotates which attach to large gear by using shaft which further attach to small gear, placed on dynamo finally dynamo produces electric power. This is simple in construction due to it made by local available material. By using this waste gas of vehicle this model can work better for the electric power generation. This set up is mainly useful for villages. It can be use as power source at night when output power produced by set up is stored in battery. This set up is easy to handle and cheaper, in concern with everyone.
2. LITERATURE SURVEY
Now-a-days technology is moving at a very faster rate. The conventional energy sources like Petrol, Diesel etc. are on a verge of extinction. So scientists are moving towards the use of non-conventional energy resources. But it also requires some kind of energy to convert it into another form. In this project we are utilizing the kinetic energy of exhaust gases of vehicle which is of no use.
Š 2017, IRJET
by conventional and non conventional energy sources. The all forms of energies are required to doing various mechanical operations, which are related to the agricultural sector. There are mainly use of electric energy is done by cultivator for irrigations operation. But now there is large problem of electricity due to low availability energy resources. So in villages there is no maximum electric supply for doing simple operations such as mobile charging power for lamps etc.
|
Generation of Electricity by Using Exhaust from Bike by S.Vijaya Kumar, Amit Kumar Singh, Athul Sabu and Mohamed Farhan.P[1]:- According to their study, it has been identified that there are large potentials of energy savings through the use of waste heat recovery technologies. Waste heat recovery entails capturing and reusing the waste heat from internal combustion engine and using it for heating or generating mechanical or electrical work
ISO 9001:2008 Certified Journal
|
Page 1809