International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395 -0056
Volume: 04 Issue: 03 | Mar -2017
p-ISSN: 2395-0072
www.irjet.net
RFID BASED SCHOOL CHILDREN SECURITY SYSTEM Mrs.RHemalatha[1], Divakar S[2],Logesh D[3],Manoj Kumar S[4],Manoj Kumar S[5] 1Assistant
Professor Department of ECE, Scholar (B.E/ECE), Jansons Institute of Technology, 3Hemalatha.R, Dept. of electronics and communication engineering Engineering,Jansons institue of Technology,Tamilnadu,India. ---------------------------------------------------------------------***--------------------------------------------------------------------Abstract - A lot of children need to communicate between without leaving to classes. This paper also focused toprovide homes to school daily. In recent days safer the security to the children from starting location to the transportation of school children has been a severe issue as it destination point with applied RF technology. is often observed that, the child is forgotten to exit in the SEONG SHABAN described the security of the children at respective bus stop and if the child not entering the bus in a Zone premises. This paper adopted a wireless sensor respective stop. This project intends to find yet another network methodology to identify the vehicle license plate solution to solve these problems by developing a bus safety number system that will control the entry and exit of students from the buses through an advanced methodology. The proposed while moving with high speed. This paper also focused to system uses RFID (Radio Frequency Identification), GSM to trace the unauthorized parking vehicles at the school zone send notification to parents regarding student and proximity premises to safe guard the children from the accidents from sensor monitoring the speed of bus and alcoholic sensor is used the wrong and hidden zone areas. to detect alcoholic consumption of the driver. G. BHARATHI, L.RAMURTHY proposed that a mechanism which will trace the missed student by using GSM- GPS Key Words: RFID,MICROCONTROLLER,GSM, PROXIMITY technology. An ARM 7 is SENSOR,ALCOHOLIC SENSOR. used to process the given information and to send the appropriate location of the missed student by adopting the GSM technology. The Missed student Latitude and Altitude 1.INTRODUCTION locations are determined by adopting the GPS Technology. School buses transfer lot of children daily in various V. SIVASANKARAN et.al proposed a RFID –GSM technology countries around the world. While there are many problems to provide the security to the school children. The RFID tags that might disturb the parents regarding the safety that are attached to the school transportation of school going children, the paper is looking children bags for tracking and GSM is used to into introducing the bus controlling system that will help the school children in a secure and safer way. The send the messages to the respective parents. supervision of the regularity of students during their entry M. NAVYYA et.al Proposed GSM-GPS technology to track and exit from the bus is difficult for the drivers,which led to children students. GPS is used for identifying the student endangering child safety. It has been increasing significantly location. GSM is used to send the information to the parent in the recent years .This project, through entry and exit recordings, aims to create a suitable environment by android mobile. Monitoring database is provided at the following certain set of criteria of security and safety for control room of the school. school bus that will have a positive impact on the student and their family. 2UG
In this prototype ,GSM module ,RFID Tag which will exchange the data with the RFID reader via radio waves and displaying each student names and roll no into the LCD Display.
KHALEED SHABAN adopted RFID Technology to safe children from wrong identification their destination location, method to curtail the students sleeping in the bus itsself |
Impact Factor value: 5.181
3.1 POWER SUPPLY A power supply is an electronic device that supplies electric energy to an electrical load. The primary function of a power supply is to convert one form of electrical energy to another.
2.LITERATURE REVIEW
Š 2017, IRJET
3. HARDWARE COMPONENTS
|
3.2 TRANSFORMER Steps down high voltage AC mains to low voltage AC. ISO 9001:2008 Certified Journal
|
Page 1710