International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395 -0056
Volume: 04 Issue: 03 | Mar -2017
p-ISSN: 2395-0072
www.irjet.net
Work Hour Measurement System for Tractor Donkar Nikita, Patil Nilam , Katkar Prerana. Assistant professor: Miss. Sushmita Sharma. ---------------------------------------------------------------------***--------------------------------------------------------------------1.1 RELATED work: Abstract - Design of work hour measurement system We are working on a project which calculate working is specially developed for the tractor. In old tractor period of tractor. We choose this project because it there is meter to calculate working hour period of the becomes headache to vendor when the owner tractor. This is normally based on the engine working misbehave with the meter. Calculating the working period. There is direct connection between engine and period using vibration sensor and sending the message that meter, but sometimes the owner of the tractor using GSM is the advance features in this project. misbehave with the connection and it is difficult to 1. Amplifying circuit: calculate the exact working period of the tractor. In this Here IC 555 based astable multivubrator is used as project we have try to solve the problem. We have amplifier. It directly drives a LED. At the output of proposed a system based on arduino kit, vibration vibration sensor we get voltage in mV. So that its sensor and GSM modem. required to amplify that voltage. At the output of amplifier circuit 3-3.5v. Key Words: Vibration sensor, GSM modem, aurdino board.
1. INTRODUCTION : In India so many peoples use tractors for farming purpose. To better utilisation of tractor engine servicing of engine in particular time period is more important. Normally the warranty of tractor is in working hour of engine. The vendor will provide the service to tractor up to the warranty period. After warranty period it’s not vendor responsibility to service that tractor, so it is very important to calculate the exact working period of the tractor. In this project we approach a new system to calculate working period. In our project use vibration sensor which sense the vibration of tractor, when tractor is in working condition. Sensor will provide the small amount of voltage at the output. Using the AT mega 328 we calculate the working period and display on the LCD. GSM is nothing but global system for mobile communication. We use GSM model for alerting the owner and vendor also. GSM send the message to owner for servicing the tractor. The duration of message is after the half working period. The vender got the message when the warranty period is expiring. So it is very helpful to vender and owner to maintain the record for the tractor.
Š 2017, IRJET
|
Impact Factor value: 5.181
Fig-1: The circuit diagram of amplifier circuit. 2. Proposed algorithm:
Fig-2:Block diagram of proposed system.
The overall functioning of the System is explained through the block diagram shown in figure. It represents the general order and hierarchy of various |
ISO 9001:2008 Certified Journal
|
Page 1258