International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395 -0056
Volume: 04 Issue: 03 | Mar -2017
p-ISSN: 2395-0072
www.irjet.net
Automatic Painting Gun for Solar Storage Tank with Arduino UNO Microcontroller Prof. P.S.Magdum1, Suyash Mohite2, Pratik Patil3, DattatrayPuakle4, Abhishek Kumbhar5, Abdulla Mullani6 Prof.,EE, SGI Atigre,Shivaji University, India UG Student EE, SGI Atigre, Shivaji University, India ---------------------------------------------------------------------***--------------------------------------------------------------------1
2 ,3,4,5,6
Abstract-During the manufacturing of solar water heater, the industry faces a problem of painting the internal portion of the water storage tank. So far this task of painting the tank internally is carried out manually by individual and a lot of time is taken to complete it satisfactorily for the consumers. In this project we are decide make a automatic painting system to paint the internal part of the Solar water heater storage tank by automation with the gear drive driven by the application of stepper motor drive with control by the Arduino uno controller. Keyword- Arduino Uno, Stepper motor, gear drive etc 1. INTRODUCTION In Solar water heater companies, they manufacture solar tank .But during manufacturing inner part of tank coloring is necessary for corrosion resistance. Now at present the painting is done manually, but they required automatic painting process. So we are going to design automatic painting gun. So during design of the painting gun the length of the tank and size is we have to consider. As the painting gun requires linear motion so we use the rack and pinion type of gear system. To run the gear drive stepper motor is required with proper time control circuit. As length of gun is large so proper support is done. By doing this assembly we done the linear movement of painting gun for paint the inner part of the solar water tank.
2. LITERATURE VIEW In Solar water heater solar industry they manufacture the solar water heater and the tank is need to be paint by inner side of tank . As they do the paint manually so we are going to design the painting gun of linear movement. As they do painting manually so accuracy is less and time require is more. As per economic consideration this manual process is costly now our proposal is that an automatic painting with application of the electric motor and painting gun is driven by the gear drive. So automatic painting gun is use to paint the tank.
3.
METHODOLOGY
In design of the Automatic painting gun the main constructive work is divided into 3 stages: I] Linear movable rod is made with rack arrangement. II] Support for gear drive and painting gun. III] Selection and Control circuit for the motor. Now for designing the whole assembly the Rack and pinion arrangement is done and then it is placed on a proper support. Now by achieving the proper assembly of gear drive with support, it is connected with the motor for the linear movement. Since the motor is attached to the gear drive rod, the specific motor used here is stepper motor. The stepper motor is connected appropriately along with the timer circuit . this timer circuit is for the same purpose as incase the cartridges of the
Š 2017, IRJET
|
Impact Factor value: 5.181
|
ISO 9001:2008 Certified Journal
|
Page 895