International Research Journal of Engineering and Technology (IRJET) Volume: 04 Issue: 02 | Feb -2017
www.irjet.net
e-ISSN: 2395 -0056 p-ISSN: 2395-0072
A Paper on Study & Design of Multipurpose Riveting Machine S. H. Satbhai1, D. B. Zagade2, S. S. Shaikh3, B. V. Somwanshi4, Asst. Prof .P. S. Baravkar5, Prof. D.P.Sonawane6 1BE
Student, Department of Mechanical Engineering, SND COE & RC, Maharashtra, India
2BE
Student, Department of Mechanical Engineering, SND COE & RC, Maharashtra, India
3BE
Student, Department of Mechanical Engineering, SND COE & RC, Maharashtra, India
4BE
Student, Department of Mechanical Engineering, SND COE & RC, Maharashtra, India
5 Asst.
Professor, Department of Mechanical Engineering, SND COE & RC, Maharashtra, India
6 Professor,
Department of Mechanical Engineering, SND COE & RC, Maharashtra, India
---------------------------------------------------------------------***--------------------------------------------------------------------and then the rivet portion projecting out of the joint is
Abstract – The successful implementation of any
manufacturing sector is largely depend upon the quality & its
formed by the impact of the rivet head. This process
productivity. In traditional machining process for performing
requires considerable force and only fixed joints can be
the different operation a separate machine required which
formed. There is a chance of the work-piece to be
becomes a time consuming also the inaccuracy in productivity
damaged due to impact. This process is used for joining
due to involvement of human error which affects to productivity cannot be get improved at faster rate .the main purpose of this paper to develop special purpose machine for
solid steel elements and finds less application for hollow components.
drilling and riveting machine which leads to improve the
2. Pull riveting – In this process a scissor riveting
quality and productivity by minimizing the time period. in this
machine operated either manually or by power (electric
process two or more operation can be performed
/ pneumatic) is used. In this process is hollow and the
simultaneously due to this cost of a material reduces.
pull force is applied on the nail projecting out of the rivet. The nail is gripped in the gripper head of the
Key Words: Riveting, Productivity, Automation, OHNS, Drilling.
process is relatively fast. This process is used in production of sheet metal bodies, cabins etc.
1. INTRODUCTION The conventional machining process consists of pull
1. Push riveting - In this process usually a pneumatic hammer is used where the riveting head or punch is mounted on the machine which is moved to and fro by pneumatic power, the rivet is solid in this case. The rivet is positioned in the hole between the mating parts |
Impact Factor value: 5.181
Thus the above mentioned process required considerable force and only fixed joint can be formed
riveting and push riveting .basically these are,
© 2017, IRJET
machine and is pulled to form the rivet head. This
|
also there is a chances of failure of work piece due to impact. therefore developing world performing drilling and riveting operation simultaneously on individual machine which becomes complicated for workshop and various batch and mass production. In this advertence attempt had been made to develop a machine which can ISO 9001:2008 Certified Journal
|
Page 1508