International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395 -0056
Volume: 04 Issue: 01 | Jan -2017
p-ISSN: 2395-0072
www.irjet.net
DESIGN AND DEVELOPMENT OF GROUNDNUT OIL EXTRACTING MACHINE BY HUMAN PEDAL FLYWHEEL MOTOR CONCEPT KETAN S. TEKALE [1], YASHODIP K. CHAURE [2], AKSHAY R. KAPRE [3], SHAILESH KUMAR [4] PRAVEEN K. MALI [5] Student of B.E.Mechanical,G.H.Raisoni C.O.E.M.,Chas,Ahmednagar,Maharashtra,India[1],[2],[3]&[4] Assistant professor, G.H.Raisoni C.O.E.M., Chas, Ahmednagar, Maharashtra, India[5] ketantekale@gmail.com , praveen.mali.786@gmail.com ---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract - A critical appraisal of technologies for oil
of Oil such as Distillation, Expression, Effleurage, Maceration, Extraction of Oil By Oil Seed Presser. The Human Powered oil seed presser can be used to extract oil from seeds for a small scale quantity. For domestic purposes human mechanical power can be used to extract oil from various seeds at a lower scale.
extraction from oil-bearing agricultural products is presented. Different types of oil- bearing agricultural products are discussed. The products include; groundnut, coconut, sheanut , castor, sunflower, sesame, oil-palm, etc . In India, most of land use for agricultural purpose which produces semi-finished product or goods. Groundnut also one of the agricultural semifinished goods. Groundnut is grown on small scale farmers in developing countries like India. The average kernel price is approximately twice the price of pod. A research-work for design, fabricate, and performance evaluation of a groundnut oil extracting consisting of feed hopper with a flow rate control device and power system. So working on the above points, we design and fabricate a new medium production capacity machine and today we proudly present this machine called groundnut extracting machine
1.1 Concept Introducing low cost automation was to overcome problems with the current manual traditional method. The concept of the work is, (1) Observe the manual methods to identify the important process variables. (2) Develop a prototype automation system which could control over all of the process. (3) Produce a specification for a low cost automated system. (4) Refined design of the machine & fabricate the machine, as this plays a major role in rural area. The above considering point we design the semi-automated machine which replace manual process.
Key Words: Groundnut, Human power machine , Bicycle technology , Screw presser , Flywheel
1.INTRODUCTION Oil extraction is the process of recovering oil from oilbearing agricultural products through manual, mechanical, or chemical extraction. The agricultural products are classified into oil-seeds (cotton, castor, sunflower, etc), nuts (coconut, groundnut, sheanut, etc) and mesocarps or fruits (oil palm). Bicycle technology is one of oldest technology in world, it can be used to transmit power. Current scenario of power supply in rural areas is worse load shedding of 10 to 12hrs daily is experienced so electrical machines are rarely used. groundnuts are important seed used for oil extraction, our state is larger producer of groundnuts but oil extraction in industry is less beneficial for farmer and farmer is unable to extract oil due to limited resources so our aim is to develop an machine which runs on human power and helps easier oil extraction .there are Various Method of Extraction
Š 2017, IRJET
|
Impact Factor value: 5.181
1.2 Objective The main aim of this project is to overcome the traditional method. (1) To reduce wastage due to crack or crushed groundnut. (2) To increase the efficiency. (3) To reduce the hard work and To reduced time to shell the groundnut. (4) To develop a low cost machine which can be used by farmer to convert their semi-finished (shell groundnut) into finished product (groundnut). (5) It satisfies the need of village people to earn more money.
|
ISO 9001:2008 Certified Journal
|
Page 642