International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395 -0056
Volume: 04 Issue: 04 | Apr -2017
p-ISSN: 2395-0072
www.irjet.net
Real Time Healthcare Multipara Monitoring System Using ARM LPC-2148 Shilpa Darekar1, Artee Jadhav2, Prajyoti Sankpal3, Prof. Ankush Patil4 1, 2,3B.Tech 4Assistant.
in Electronics Engg. BVDUCOE, Pune, Maharashtra, India.
Professor in Electronics dept., BVDUCOE, Pune, Maharashtra, India.
-------------------------------------------------------------------------***----------------------------------------------------------------------
Abstract: Real Time Healthcare multipara monitoring
body temperature of patient is 37 C and heart rate is 72BPM. For startup GSM model and ARM7 2148 80 commands are necessary. Programming is done in embedded c language.
using ARM PC 2148 is used for measuring heart rate and temperature. In this system parameters, can be continuously monitor and real time data transmitted on doctors mobile through GSM modem. Using this system doctor can continuously monitor critical patient from any remote location. The aim of this project is to use embedded technology for patient care. In India particularly in rural area are found to struggling to receive timely medical treatment. There is lack of expert physician in certain sector of the health service. Telemedicine originally emerged to serve rural population where time and cost of travel to make it difficult to receive the medical care so telemedicine is forming a new structure in medical field. By using telecommunication and information technology Healthcare multipara monitoring system using ARM7 includes the aspects of acquisition of biological parameters like body temperature heart rate spo2 etc. The processing of collected data using ARM LPC 2148 processor and processed data is then displayed on doctor’s mobile phone through GSM. Also the data can be displayed on the LCD display. In this system utilizing low cost component transmit data.
2. SYSTEM ARCHITECTURE: In this paper we present a system temperature, heart rate, SPO2 sensor and GSM, temperature sensor are used to measure body temperature of patient. Heart rate sensor is used to measure heart beat rate of patient and SPO2 is used to measure oxygen saturation in the blood, ARM controller get the information from devices it sends information to doctor as well as any family member using ARM LPC 2148 and developing for patient. Main advantage of this system is reducing unnecessary wastageof memory stage and save power. At receiving end mobile to be used to receive all data of patient as wellAs information continuously display on LCD display.
POWER SUPPLY
Keywords: Body temperature, heart rate, GSM modem, mobile phone.
1. INTRODUCTION: In the Hospital many patients are in critical condition. They require continuously monitoring biological parameter like bodytemperature, Heart rate, SPO2. In Intensive care Unit doctor are not available for 24 hours critical parameters are observed continuously. In this case our system is useful because system can send Real time data on doctors mobile. When patient in critical condition and their parameters drops below threshold value of abnormal condition then system sends SMS to doctors in real time patient data will be send for every three minutes. Heart rate for every one minute.
HEART RATE SENSOR
|
Impact Factor value: 5.181
ARM PROCESSOR LPC 2148
SPO2 SENSOR
GSM
MOBILE
Fig.1 Block Diagram of Real Time Healthcare Multipara monitoring System Using ARM LPC-2148.
When patient is normal system will continuously monitor the patient parameters and save the records. The regular
Š 2017, IRJET
LCD16X2
TEMPRATUR E SENSOR
|
ISO 9001:2008 Certified Journal
| Page 1839