By Cindy Riley CEG CORRESPONDENT
As curious spectators gathered on a frosty December morning, construction crews worked methodically to demolish the historic Black Hawk Bridge. Implosion of the longtime structure, which for
decades connected Lansing, Iowa, to rural Crawford County, Wisconsin, clears the way for further construction on a new, wider crossing over the Mississippi River.
BRIDGE page 58
By Lucy Perry CEG CORRESPONDENT
Even if you’re doing everything right, it may be time to schedule a jobsite consultation. An expert evaluation of your construction site, from fleet staging to safety practices, can offer a new perspective on operations, a better way to perform rudimentary tasks, plans to save costs in fuel, labor and equipment maintenance. The process can be as cursory or as detailed as you need. Here is a picture of what you can expect and suggestions for how to approach a job site evaluation.
During the AED Summit/CONDEX held Jan. 19-21, 2026, in Dallas Texas, the association’s board of directors and fellow members honored Construction Equipment Guide with an award commemorating 50 years of membership.
PRINTS HIS FINAL TICKET
After more than five decades of service, Ray Holland has retired from McCann Industries, closing an extraordinary career that began in July 1974. When he joined McCann Industries, the company was still in its early stages.
TOGETHER
The 37th annual Fort Wayne Farm Show once again delivered a strong showing for the agricultural and equipment industries, drawing a steady crowd of farmers, contractors and industry professionals Jan. 13-15, 2026.
16 MNLA, MTGF HOST NORTHERN GREEN 2026 IN ST. PAUL, MINN.
As the largest trade show for green industry in the north-central region, Northern Green invites outdoor pros to connect and network, offering equipment displays and educational seminars.
The Associated Equipment Distributors gathered Jan. 19-21 in Dallas, Texas, for its annual Summit/CONDEX. The event was an opportunity for members to network, attend seminars, fundraise and see what’s new in the industry.
22 CONCRETE INDUSTRY CONVENES FOR WORLD OF CONCRETE 2026
World of Concrete (WOC) unveiled what it billed as the largest-ever showcase of products, enhanced educational programming and strengthened industry networking opportunities at the Las Vegas Convention Center Jan. 19-22, 2026.
24 ACQUISITION TALKS END BETWEEN DOOSAN BOBCAT, WACKER NEUSON
Wacker Neuson and Doosan Bobcat have halted talks about an acquisition of a majority stake in the German construction company, Reuters reported on Jan 22, 2026.
32 ECA NAMES DAVE JOHNSTON ITS NEW VICE PRESIDENT
ECA announced the promotion of Pittsburgh branch manager Dave Johnston to vice president. He joined ECA in 2017 as branch manager in Pittsburgh after an already successful career in the United States Marine Corps.
34 CAWGC ANNOUNCES NEW DIRECTOR POSITIONS FOR LIBURDI, CICHON
Effective Jan. 1, 2026, Carla Montagano Liburdi has been named executive director, and Kristie Cichon has been promoted to membership and events director. Both have served the association in vital capacities since 2021.
34 MCCOY CONSTRUCTION & FORESTRY ANNOUNCES LEADERSHIP CHANGES
Effective Jan. 5, Roy James assumed the role of vice president of rental and used equipment. Andy Flinn succeeded James as vice president of Region 2, as he oversees locations in Illinois, Indiana, Missouri and Paducah and Owensboro, Ky.
54 AGC OF MN FOUNDATION WINS GRANT TO ADDRESS MENTAL HEALTH CRISIS
The AGC of MN Foundation has been awarded grant through the Minnesota Department of Labor and Industry to lead a statewide initiative addressing the mental health crisis within Minnesota’s construction industry.
59 STELLAR CELEBRATES ANOTHER YEAR OF GIVING WITH UNITED WAY
Stellar Industries has continued its longstanding tradition of giving back to local Iowa communities with a combined donation of $34,561 to the United Way of North Central Iowa.
59 COMMERCIAL VEHICLE INDUSTRY
GEARS UP FOR WORK TRUCK WEEK
Work Truck Week runs March 10-13, 2026, at Indiana Convention Center in Indianapolis. It includes The Work Truck Show, Green Truck Summit, NTEA Annual Meeting, Work Truck Week Ride & Drive, educational program and more. 62
GRANITE EQUIPMENT IS
FOR BUSINESS IN WISCONSIN
Red Granite Equipment, providing truck equipment, trailer and work-ready truck solutions, announced Jan. 15, 2026, that it has commenced operations across the state of Wisconsin and beyond.
70 PURPLE WAVE AUCTIONS EXHIBITS AT CONEXPO-CON/AGG 2026
Purple Wave Auction is exhibiting at ConExpo-Con/AGG, underscoring its commitment to customer service and offering in-person guidance for equipment buyers and sellers nationwide.
2017 HAMM HD+110IVT $103,000 STK# HM17056, 703 HRS, Cape Girardeau, MO
2018 KOMATSU PC88MR-10 $74,500 STK# KM2023642, 3600 HRS, Marengo, IL
2022 KOMATSU WA320-8 $205,000 STK# KM2022647, 533 HRS, Springfield, IL
2008 GRADALL XL4100 II $58,000 STK# ZZ2022589 7,845 HRS, Bolingbrook, IL
2018 HAMM HD+140iVV $70,990 STK# HM18003, 1910 HRS,
2008 VALMET 840.3 $95,000 STK# VT2022063, 25,466 HRS, Escanaba, MI
2019 WIRTGEN W120CFI $435,000 STK# WG2021088, 1148 HRS, Springfield, IL
2018 KOMATSU HM400-5 $479,500 STK# KM2024111, 5506 HRS, Cape Girardeau, MO
2013 HAMM HD12VV $19,500 STK# HM2023091 3238 HRS, DePere, WI
KOMATSU PC210LC-11 $129,500 STK# KM2023069, 5422 HRS,
IL
2016 KOMATSU 931.2 $315,000 STK# VT2022024, 9946 HRS, Escanaba, MI
KOMATSU PC210LC-10 $134,500 STK# KM2023319, 3628 HRS, Eau Claire, WI
2017 KOMATSU PC88MR-10 $55,000 STK# KM2022612, 5196 HRS, Bolingbrook, IL
2020 KOMATSU WA270-8 $175,000 STK# KM2022362, 649 HRS, DeForest, WI
2014 KOMATSU D37PX-23 $99,500 STK# KM2023250 2204 HRS,
2019 KOMATSU PC170LC-11 $155,000 STK# KM2022354, 2310 HRS, Bolingbrook, IL
2018 KOMATSU PC490LC-11 $159,500 STK# KM2024254, 9121 HRS, Columbia, MO 2015 CAT 349FL $89,500 STK# CT2024019, 10,25 HRS, Escanaba,
KOMATSU 931.2 $305,000 STK#VT2023001, 10,292 HRS, Escanaba, MI
VT2023001, 10,292 HRS,
2020 KOMATSU PC210LC-11 $239,500 STK# KM2022040, 682 HRS, Bolingbrook, IL
KOMATSU PC210LC-11 $179,500 STK# KM2022040, 964 HRS, Eau Claire, WI
2015 KOMATSU PC228USLC-10 $149,500 STK# KM2021516, 4061 HRS, Escanaba, MI
2018 HAMM HD+110IVO $104,560 STK# HM18066 773 HRS, Carterville, IL
KOMATSU WA475-10 $389,500 STK# KM2023313, 1157 HRS, Columbia, MO
2020 KOMATSU PC240LC-11 $220,000 STK# KM2022017, 2323 HRS,
IL
2021 Takeuchi TL12R2, S/N 412104134 2883 Hours, CAB/AIR/HEAT, TWO SPEED, HIGH FLOW HYDRAUICS, HYDRAULIC COUPLER, 84" GP BUCKET $44,900
2022 Case 521G, S/N 253822, 266 Hours, CAB/AIR/HEAT, RIDE CONTROL, THIRD VALVE, LIMITED SLIP DIFF, JRB COUPLER2.5 YARD GP BUCKET, DELUXE CAB .. $129,900
COUPLER, 18" BUCKET, AUX HYDRAULICS $109,900
2022 Case 321F, S/N NNHP04331, 241 Hours, CAB/AIR/HEAT, HIGH SPEED TRANSMISSION, SKID STEER STYLE COUPLER, 1.7 cu yd BUCKET, LIMITED SLIP DIFFERENTIAL, THIRD VALVE HYDRAULICS TIRES LIKE NEW, PREMIUM CAB $82,500
2023 Case TV370, S/N 2023 Case TR370B, 176 Hrs, CAB/AIR/HEAT, HYDRAULIC COUPLER, 84" GP BUCKET, DELUXE CAB, PREMIUM DISPLAY PANEL, GOOD TRACKS
$72,500
Roadtec RX100e - ‘18, approx. 500 hrs. Includes grade controls $165,800
Sakai R2H-4 - ’19, approx. 900 hrs. 83” triple drum static $85,500
Sakai R2H-4 static roller - ‘23, approx. 120 hrs., #C002897
$108,800
Sakai SW884ND - ‘19, approx. 2900 hrs., #C002777, Double drum Oscillatory $148,400
Sakai SW300 - approx. 450 hrs, 39” drum, #C000211 $26,850.
Superior DT74J - ’19, approx. 1300 hrs. AC, Side shift, gutter brush, #C001774 $35,400
BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Out Conveyor $152,800
Roadtec RX-300 - ’18, approx. 600 hrs. 4’ drum $311,400
Sandvik CJ412 - ‘14, approx. 1400 hrs. Mobile jaw plant
$540,800
ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls ....................................$35,200
Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd $P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ..............$P.O.R.
ASTEC GT104 - ‘17, 325 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154
$148,900 KPI FT2650 – ’19, approx. 1800 hrs. Tracked jaw crusher $546,950
Mauldin 1560 paver – ’22, approx. 600hrs. 8-14’, electric screed heat $99,600
P.O.R. items may be on rent causing pricing and hours to vary.
During the AED Summit/CONDEX event held Jan. 19-21, 2026, in Dallas Texas, the association’s board of directors and fellow members honored Construction Equipment Guide (CEG) with an award commemorating 50 years of continuous membership. Ted McKeon (R), president of Construction Equipment Guide, accepts the award from Jon Cruthers (L), senior vice president, market and business development, Associated Equipment Distributors (AED). CEG is celebrating its 68th year in business in 2026.
The Illinois Department of Transportation announced that work to replace the Illinois 2 bridges over the Rock River in Rockton is complete. The $25.3 million project allows for heavier vehicles to use the bridge in a corridor connecting the communities of Rockford, Rockton, South Beloit and Beloit, Wis.
Built in 1965, the bridges had exceeded their design life, with a weight limit of 26 tons for a single vehicle and 40 tons for a combination vehicle. Work began in early 2024 by demolishing and building the new structures by moving the southbound bridge to the median to serve as a tramway.
expected to be completed by summer 2026.
Over the next six years, IDOT is planning to improve 7,107 lane mi. of highway and 8.4 million sq. ft. of bridge deck as part of Rebuild Illinois, which is
Work continues to demolish the temporary tramway and resurfacing of the road before the bridges.
The new bridges feature shoulders, and the southbound bridge has accommodations for a future multiuse path. While the bridges are done, the project is not completed as work continues to demolish the temporary tramway and resurfacing of the road before the bridges. All work is
investing $33.2 billion into all modes of transportation. Accomplishments through year six of Rebuild Illinois include almost $20.8 billion of improvements statewide to 21,309 lane mi. of highway, 815 bridges and 1,181 additional safety improvements.
After more than five decades of service, Ray Holland has retired from McCann Industries, closing an extraordinary career that began in July 1974. Few professionals in the construction equipment industry can point to a tenure that spans more than 50 years with a single organization, making Holland’s career a rare and remarkable achievement.
When Holland joined McCann Industries, the company was still in its early stages, operating just two locations with a modest footprint. Over the next five decades, he witnessed — and helped support — significant growth and transformation as McCann expanded its locations, product offerings and customer base across the Midwest. During that time, Holland held multiple roles, primarily in the Crestwood and Chicago markets, earning a reputation for consistency, accuracy and an unwavering commitment to customers.
Among colleagues and customers alike, Holland became known for a simple phrase that captured his approach to work: “print the ticket.”
The saying reflected more than efficiency
— it represented accountability, urgency and follow-through. If a customer needed support, Ray made sure the job was done right, on time and without excuses. That mindset
helped shape service standards that continue to influence McCann Industries today.
Beyond his operational contributions, Ray played an important role in building long-
term customer relationships. He consistently prioritized the success of contractors and municipalities, understanding that trust and reliability are earned over time. His steady presence and deep institutional knowledge made him a valued resource not only for customers, but also for generations of McCann associates who learned by example.
To celebrate Holland’s career, McCann Industries recently hosted a luncheon attended by Holland, his family, longtime coworkers and company leadership. The gathering served as a reflection on decades of shared experiences and lasting relationships built over the course of his career.
“Ray’s legacy is not just measured in years,” said McCann leadership. “It’s measured in the standards he set, the customers he supported and the people he influenced along the way.”
As Holland steps into retirement, McCann Industries extends its sincere gratitude for his more than 51 years of dedication and service. His impact on the organization — and on the customers it serves — will continue to be felt for years to come.
715-752-8112
JD 50G, A/C, Hyd Thumb, 5’7” Long Arm, Blade, Aux, #292872 ......................................$45,000
Kubota KX057-5, A/C, Hyd Thumb, Angle Blade, Aux Hyd, #296470 ........................$76,000
JD 331G, A/C, Hi Flow Aux, 2 Speed, Ride Control, #262952 .. $65,000
JD 310SL, A/C, 4X4, Ext Dipper, Ride Control, #262892 .... $99,000
JD 85G, A/C, Rubber Pads, Blade, Aux Hyd, 6’11” Arm, #291320 ........................$99,000
Komatsu PC138LC-11, A/C, Long Arm, CPLR, Rubber Pads, #298908 ......................$165,000
Bobcat T870, A/C, Joysticks, 2 Speed, Air Ride, #298789 .............. $49,000
JD 320P, A/C, 4X4, Ext Dipper, Aux, 19.5 Tires, Coupler, #302479 $119,000
JD 135G, A/C, 9’11” Arm, 24” Shoes, Reduced Tail Swing, #249203 ........................$87,000
Hyundai HX145A, A/C, Coupler, Aux Hyd, Blade, Rubber Pads, #302690 ..............$99,000
CAT D6N LGP, A/C, Winch, LGP, 34” Pads, 6 Way Blade, Trimble, #304860 $148,000
CAT 430F2, A/C, Pilots, Ext Dipper, 4X4, Aux, 19.5 Tires, #299832 $95,000
JD 210G, A/C, Hyd Thumb, Coupler, 9’7” Arm, Rev Fan, #261276 ......................$127,500
Volvo EC750EL, A/C, CWRT, 36” Pads, 9’6” Arm, 96” BKT, #305074 ......................$289,000
JD 700K, A/C, LGP, 30” Pads, 6 Way 132” Blade, Sweeps, #296466 $142,000
Deere 524K, A/C, Rev Fan, 20.5 Tires, Front Diff Lock, #300486 .. $89,000
JD 245G, A/C, Aux Hydraulics, 9’7” Arm, 32” Shoes, Air Seat, #262242 ......................$198,000
Bobcat S650, A/C, 2 Speed, Air Ride, Joysticks, #301217 ......................................$25,000
CAT D8T, A/C, 152” Semi U Blade, Ripper, Trimble Ready, #305941 $350,000
JD 844K-III, A/C, Scale, Radio, 8 YD GP Bucket, #261515 .......... $215,000
The 37th annual Fort Wayne Farm Show once again delivered a strong showing for the agricultural and equipment industries, drawing a steady crowd of farmers, contractors and industry professionals to the Allen County War Memorial Coliseum in Fort Wayne, Ind., Jan. 13-15, 2026.
The annual event continues to serve as a key winter gathering for exhibitors and attendees to connect, explore new equipment and discuss solutions for the upcoming season.
This year’s show featured a diverse range of exhibitors highlighting the latest developments in agricultural machinery; construction and material handling equipment; attachments; technology; and service offerings.
Attendees were able to see equipment up close, ask detailed questions and gain insight into how new technology can help improve efficiency, productivity and overall jobsite performance.
Throughout the show, exhibitors spent time talking with attendees about equipment applications, attachment options, maintenance support and operational challenges. Many conversations focused on land clearing, forestry and vegetation man-
agement, compact and mid-size equipment and versatile machines that can serve both agricultural and construction needs.
The Fort Wayne Farm Show also provided valuable networking opportunities for the industry. Dealers, manufacturers and customers exchanged perspectives on market trends, upcoming projects and the factors influencing purchasing decisions in today’s market. Exhibitors noted strong engagement from attendees who were actively planning for spring work and evaluating equipment options ahead of the busy season.
With a strong regional turnout and a wide variety of equipment on display, the Fort Wayne Farm Show continues to be an important event for the Midwest agricultural and equipment community. By bringing together industry professionals in a hands-on environment, the show plays a vital role in helping attendees prepare for the months ahead and make informed decisions for their operations.
For more information, visit tradexpos.com/fort-wayne-farm-show. CEG
(All photographs in this article are Copyright 2026 Construction Equipment Guide. All Rights Reserved.)
When you’ve got job that requires a site to be prepped or cleared, you need attachments you can trust to get the job done right the first time. At Blue Diamond Attachments, we’ve got your back.
Our family of brush cutters are purpose built to provide optimal performance on your skid and compact track loaders, mini loaders and full line of excavators. Providing you exactly what you need to get to the next phase of your project on – or even ahead of schedule.
So, whether the job is large, small or somewhere in between, Blue Diamond brush cutters are designed to handle it. Choose Blue Diamond –where all we do is elevate everything you do.
and
BUILT STRONG. ATTACHED FOR LIFE.
524 P
Cab/AC, 3 Spool, Dual Diff Lock, Coupler, Bucket, 272 Hrs $205,000
#C00095-2, 9309 Hrs, Cab/AC, 12'10" Arm, 36"
Green industry professionals gathered at the Saint Paul RiverCentre in St. Paul, Minn., for Northern Green 2026 Jan. 20-22.
As the largest trade show for green industry in the north-central region, Northern Green invites outdoor pros to connect and network, offering equipment displays and educational seminars.
Northern Green serves all aspects of the industry marketplace, including nursery and greenhouse growers; garden center operators; landscape and irrigation contractors; landscape designers; lawn, tree, snow and gardening professionals; golf course and park superintendents; school and cemetery grounds supervisors; sports turf managers; and arborists.
see GREEN page 31
and Jeff
representatives
Hamm 3412P, 2012, 84” vibratory padfoot compactor, EROPS w/ heat & A/C, 1,200HMR .
$82,500
Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new paint job, very good condition, 9,400 HMR $195,000
Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . . .$15,500
(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready From $79,500
Rammax Walk Behind Rollers, over 25 in stock, lever & remote $4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type
$4,000 - $6,500
Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready
Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, 10.00R15 tires, 3,400 hrs
$127,500
Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday
$21,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom anti-two block, GM dsl, clean
$145,000
Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000
Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready
$115,000
Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition
$147,500
Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites
$87,500
$49,500 IR 185’s, JD diesels
CALL
(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent From $5,200
Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 HMR, work ready
$162,500
Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 HMR, work ready $224,500
Komatsu PC220LC-8 Longreach, 2011, Young Boom/Stick 60’ reach, 3,500 HMR $179,000
Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites
$89,000
Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday
$122,500
Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt
$24,500 (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition $4,000 Ea. NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Dozer Blade
$25,500
Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR
$72,500
Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch, 22” Pads, 4,100 HMR
$82,000
$49,500
Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads
Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition CALL
Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice
CALL
Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, 9,900 HMR
$87,500
Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55 winch, 7,200 HMR
$142,500
Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl Single Shank Ripper, 8,400 HMR
Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent $4,000 Others Available Call
$229,500
Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS winch, 28” pads, 7,300 HMR
$152,500
The Associated Equipment Distributors (AED) gathered Jan. 19-21 at the Hilton Anatole in Dallas, Texas, for its annual Summit/CONDEX.
The event was an opportunity for members to network, attend seminars, fundraise and see what’s new in the industry. CONDEX allowed equipment manufacturers the chance to show attendees the latest in equipment, technology and services.
Among the speakers at this year's event was Nikki Haley, former two-term governor of South Carolina. In 2010, at age 38, Nikki R. Haley was elected the 116th governor of South Carolina and reelected in 2014. She was the youngest governor in the country and first minority female governor in America. She is the only female governor in South Carolina history.
Other session speakers included Rod Bull, CEO of Komatsu; Katie Hays, director of government affairs of Caterpillar; John Kacsits, acting COO of Groff Tractor & Equipment; Andrew Ryan, president of LiuGong North America; Scott Young, president/head of region of Volvo CE; Alex Woods, president of Kubota Tractor Corporation; and many more. In total there were approximately 45 educational seminars during the three-day event.
see CONDEX page 56
was among many forestry-related products attracting the attention of AED dealers. Matt Vantine, director of tree care products, and Nicole Gorsuch, director of marketing and dealer development, both of Morbark spoke with attendees.
Kent Godbersen, GOMACO vice president of worldwide sales and marketing, showcases GOMACO’s new Polymer paver at World of Concrete 2026.
World of Concrete (WOC), the world’s largest concrete construction and masonry tradeshow for more than 50 years, unveiled what it billed as the largest-ever showcase of products, enhanced educational programming and strengthened industry networking opportunities at the Las Vegas Convention Center from Jan. 19-22, 2026.
The show floor featured more than 200 first-time exhibiting companies, bringing new perspectives, building and repair solutions brought to life by emerging technologies. Additionally, product expansion included nearly 100 total categories such as composite materials, resurfacing agents, mixers, pavers, pumps, ready mix and many others.
World of Concrete featured more than 150 educational sessions, with topics covering technical applications, best practices for business, project management and critical safety protocols for every skill level and industry role.
There were more than 60 new topics added to this year’s program and a bilingual learning environment was offered, with Wordly available for certain education sessions, with captioning and translation capabilities allowing attendees to read live captions or listen to audio in dozens of languages using their own devices.
see WOC page 26
The team from Topcon Positioning Systems showcases the latest technologies for concrete paving, including 3D lasers; surveying tools; and machine control solutions. Topcon has many third-party applications to automate and orchestrate data connections between the office and job site.
The crowd explores the offerings at World of Concrete
The Vermeer team of Pella, Iowa, (L-R) includes Cole Smith, product specialist; Zach Crabtree, product specialist; and Kegan Strobel, product specialist tree care, rental and landscape. This Vermeer ML100 is a 24.7-hp (18.4 kW) turbocharged diesel-powered, radial-lift mini loader designed for landscaping, tree care and rental markets.
The Purple Wave Auction team (L-R) included Jeff McGough, enterprise account manager construction companies-North America; Marcy Colletti, event marketing manager; and John Beasley, executive sales director.
Darda, an independent division of Brokk, develops, manufactures and supplies high-quality demolition equipment and attachments for a wide range of applications and industries worldwide. (L-R) are Volker Glatz, after sales manager; Bernd Strobele, sales director; and Sebastian Berche, Darda business development manager.
Wacker Neuson and Doosan Bobcat have halted talks about an acquisition of a major ity stake in the German construction company, Reuters reported on Jan 22, 2026.
According to Wacker Neuson, discussions were under way for Doosan Bobcat to
acquire approximately 63 percent of the company from major shareholders as well as a public buyout.
In a statement released by Wacker Neuson on Jan. 22, 2026, the company "remains focused on its strategy to pursue sustainable growth."
In a company filing, Doosan Bobcat said that after reviewing the acquisition, it has decided not to proceed, according to Reuters.
No additional comments were made by the company.
Roland Machinery Co. www.rolandmachinery.com
Bridgeton, MO
(314) 291-1330
Cape Girardeau, MO (573) 334-5252
Columbia, MO (573) 814-0083
Palmyra, MO (573) 769-2056
Portage, IN (219) 764-8080
Bolingbrook, IL (630) 739-7474
Carterville, IL (618) 985-3399
East Peoria, IL (309) 694-3764
Marengo, IL (815) 923-4966
Springfield, IL (217) 789-7711
DePere, WI (920) 532-0165
DeForest, WI (608) 842-4151
Eau Claire, WI (715) 874-5400
Franksville, WI (262) 835-2710
Schofield, WI (715) 355-9898
Slinger, WI (262) 644-7500
Escanaba, MI (906) 786-6920
Joplin, MO (417) 726-5373 Maryland Heights, MO (314) 427-4911 Springfield, MO (417) 865-0505 Colby, KS (785) 462-8211 Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Wichita, KS (316) 789-7370
1801 Watterson Trail Louisville, KY 40299 (502) 491-4000
Bowling Green, KY (270) 780-3004
Corbin, KY (606) 528-3700
Lexington, KY (859) 259-3456
Paducah, KY (270) 444-8390
Stanville, KY (606) 478-9201
Evansville, IN (812) 425-4491
Fort Wayne, IN (260) 489-4551
Indianapolis, IN (317) 872-8410 Brandeis Machinery & Supply Company www.brandeismachinery.com
Mark Deitsch, strategic business manager of Wacker Neuson of Menomonie, Wis., displays the Wacker Neuson SM100, a compact, stand-on utility track loader designed for landscaping, construction and residential jobs.
Toro of Bloomington, Minn., brought Tyler Penny, product marketing associate, Siteworks Systems, to demonstrate the Toro Dingo TX-550, a compact, diesel-powered walkbehind track loader designed for maneuvering in tight spaces while providing high hydraulic performance.
New educational sessions included an economic forecast with Ed Sullivan and Pierre Villere; Engineering: Designing for Constructability; Engineering: Bridging the Gap Between General Contractor and Engineer; The Future is Bright and Blended: Ensuring the Performance of Concrete Mixtures; Women at Work: Tools, Allies and Strategies for Career Growth Strategies in Construction; and Robotic and High Tolerance Floors, a seminar addressing the growing robotic material handling industry and high-precision.
For more information, visit worldofconcrete.com. CEG
(All photographs in this article are Copyright 2026 Construction Equipment Guide. All Rights Reserved.)
WOC from page 22 see WOC page 64
Darren Huinker, vice president of sales of HEM Paving of Grundy Center, Iowa, showcases the SFP1800, an award-winning, heavy-duty thin overlay paver designed for bridge decks, patching and whitening that features a 10- to 18-ft. paving width.
Kyle Emanuel, product information specialist of Doosan Bobcat, demonstrates the new Bobcat E20 compact excavator, which is a versatile 1- to 2ton zero-tail swing machine, ideal for tight job sites, featuring a retractable 39-in. to 53.5-in. undercarriage.
Alfonso Soriano (L) of Bedrock Concrete Construction Inc. of Petaluma, Calif., talks with Giridhar Addagudi, owner and president of Mano Engineering of Mendota Heights, Minn., about manufacturing a component for the customized equipment he uses in his concrete business.
Premier Attachments announced advancements to its earth auger drive product lineup with the launch of the enhanced H0 series, effective Jan. 12, 2026.
Designed to meet the demands of today’s more powerful skid steer and compact track loader platforms, these updates reinforce Premier Attachments’ commitment to innovation, safety and long-term performance, according to Premier Attachments.
At the core of the H0 upgrade is a new planetary drive design, engineered to deliver high torque capabilities while maintaining optimal RPM performance across a wide range of machine sizes and applications. This design allows Premier Attachments to remain flexible and responsive as equipment horsepower and hydraulic capabilities continue to evolve and improve, according to Premier Attachments.
According to Premier Attachments, key H0 drive unit improvements include:
• New Proprietary Planetary Design — built to handle today’s higher-output machines while maximizing digging performance.
• American-Made Manufacturing built in the United States for quality, consistency and reliability.
• Service Window Access — enhanced serviceability to reduce downtime and simplify maintenance.
• High-Torque Output — delivering power, efficiency and productivity on the job site.
In addition to performance improvements, Premier Attachments has introduced several standard safety and durability enhancements across its auger drive lineup:
• Hose spring kit is now standard on all full-sized skid steer and Duo-Tach auger drive kits, helping protect hydraulic hoses during operation.
• New no-slip welded tread provides improved footing on entering and exiting of standard skid steers adding operator safety on the job site.
• H020 with up to 2,229 ft./lbs. of torque
• H025 with up to 3,288 ft./lbs. of torque
• H030 with up to 4,155 ft./lbs. of torque
Premier Attachments photo Premier Attachments announced advancements to its earth auger drive product lineup with the launch of the enhanced H0 series.
• H035 with up to 5,214 ft./lbs. of torque
Each new model delivers increased torque capacity and refined RPM ranges to support auger sizes up to 42 in., depending on configuration, ensuring performance across a wide variety of ground conditions and applications, according to Premier Attachments.
“As machines continue to get more powerful, Premier Attachment’s performance must lead the way and remain ahead of the curve,” said Jim Hunt, sales and marketing manager of Premier Attachments. “These H0 drive unit improvements reflect our commitment to American-made innovation and quality, smarter serviceability and the flexibility our dealers and customers need as the industry evolves.”
The enhanced H0 earth auger drive units and standard safety upgrades will be available through Premier Attachments’ authorized dealer network beginning Jan. 12, 2026.
For additional specifications, dealer information or product availability, visit premierattach.com.
When it comes to land clearing, mowing and mulching, safety should never take a back seat.
From flying debris and dust to unpredictable weather and rough terrain, operators face constant exposure to hazards that can quickly turn a routine job into a risky one. Because modern attachments move material at higher speeds than ever before, proper protection is not just recommended, but essential.
“Polycarbonate cab reinforcement offers a proven line of defense between operators and the harsh realities of the job site,” said Nate Cleveringa, vice president of engineering and product management of Diamond Mowers. “Built to withstand heavy impact and designed for easy installation, these durable panels keep your team safe and your equipment in top shape, all while reducing interruptions that can cost time and productivity. The result is greater uptime, longer equipment life and peace of mind knowing crews are backed by industry-grade safety materials.”
Every job and machine is different, so the right fit and design matter. While a variety of solutions exist across the industry, the experts at Diamond Mowers outline several key factors operators should consider when evaluating or upgrading their cab protection. These
solutions make it simple to outfit skid steers, excavators or tractors with a perfectly matched kit that enhances visibility and job site confidence without slowing down operations.
Operator safety is a top priority, so it is widely recommended to use a minimum ½in. polycarbonate shield when running heavy-duty attachments. This high-impact protective barrier offers strength and shatter resistance, making it one of the most effective ways to help prevent injuries caused by flying material, wood chips and other projectiles.
Polycarbonate solutions are engineered to outperform standard cab glass and are designed to help operators stay protected without sacrificing visibility. The heavy-duty layer not only absorbs impact but also reduces glare, blocks dust and deflects branches.
“Whether managing overgrown brush, tackling roadside maintenance or operating in unpredictable environments, it helps crews stay safe and focused no matter the challenge,” Cleveringa said.
Diamond Mowers’ polycarbonate solutions are engineered to handle the toughest
outdoor environments, according to Diamond Mowers. Each kit is engineered to match the dimensions and contours of a machine’s cab, ensuring a secure fit that stands up to long hours, heavy workloads and the demanding nature of vegetation management, according to Diamond Mowers.
Treated with UV and abrasion-resistant coatings, these panels maintain clarity and strength season after season, meaning less wear, fewer replacements and lasting visibility operators can rely on.
“This level of resilience gives operators confidence that their cab protection will hold up season after season, no matter how demanding the job or environment,” said Cleveringa. “It’s the kind of long-term dependability that keeps equipment performing at its best, and crews focused on the work ahead instead of the wear and tear on their machines.”
Minimizing downtime is crucial, so a welldesigned polycarbonate panel should install quickly and securely. Through close collaboration with equipment manufacturers, Diamond offers exact-fit solutions for brands such as John Deere, Bobcat and Kubota that help eliminate guesswork during installation and maintain the integrity of the
machine’s original enclosure.
Each self-installed kit arrives ready to go, drop-shipped directly to a shop or job site, so operators can get back to work without delay. Fleet managers also appreciate the consistency across equipment lines, making it simple to outfit an entire team with coverage. Whether running a single skid steer or a mixed fleet of excavators and tractors, Diamond’s customfit approach ensures every operator benefits from the same dependable coverage.
Even the toughest materials eventually show signs of wear.
“Operators should inspect polycarbonate panels regularly and replace them if they show visible scratches, hazing or impact marks that could impair visibility or reduce structural strength,” Cleveringa said. “Staying proactive not only keeps crews safe but also extends the life of equipment and upholds the highest standards of job site safety.”
Polycarbonate cab protection is a smart, cost-effective way to enhance safety while ensuring every machine meets recommended protection standards.
For more information, visit diamondmowers.com.
B&D Fabricators announced that it has acquired Leading Edge Attachments Inc., a Hubbardston, Mass., supplier of frost and rock ripping buckets and other heavy attachments. This positions Leading Edge Attachments as part of B&D’s growing proposition of standard and customized heavy attachment.
“The acquisition of Leading Edge Attachments by B&D Fabricators represents a strategic milestone in expanding Entegra’s heavy attachments industry growth platform,” said Michael Flannery, CEO of Entegra Attachments LLC. “This direction will enable further investment and support in the expansion of LEA’s product lines,” said Lee Horton, prior owner of Leading Edge Attachments. “Partnering with B&D provides the resources and strategic alignment needed to accelerate innovation, without compromising our commitment to quality and customer service.”
“I’m excited about the opportunities this partnership brings,” said Todd Brinkman, president and founder of B&D Fabricators.
LEA has built its reputation on designing
and delivering construction equipment that enhances the versatility of excavators and backhoes. Its couplers and attachments are developed through close collaboration with contractors, ensuring that the products meet real-world demands. This hands-on development process, combined with decades of engineering and industry experience, enables LEA to produce durable and reliable equipment, according to the company.
The company prioritizes minimizing downtime for operators and continuously seeks customer feedback to improve existing products and develop new solutions that make jobs faster, easier and more efficient. Leading Edge Attachments will operate under B&D Attachments LLC, while maintaining its current product lines and names.
Founded in 2007, B&D Fabricators is a manufacturer of heavy equipment attachments. Headquartered in Edgar, Wis., the company operates with a reputation for engineering excellence and customer-focused solutions.
For more information, visit bdfabricators.com.
Two Southeastern Equipment service technicians win service awards in global competition with hundreds of technicians.
After months of regional competitions and technical training, Byron Eck and Kyle Helmke of Southeastern Equipment earned their place on Team KOBELCO USA. The team achieved an impressive 3rd place overall and 1st place in the “Troubleshooting Relay” event — a remarkable accomplishment among hundreds of elite technicians from across the globe.
Held annually since 2003, this competition brings together top KOBELCO technicians from around the world — including North America, Europe, Japan, Australia, India, Asia, China, the Middle East and Africa — to test their skills in hands-on service challenges, inspections and troubleshooting events.
“Having the opportunity to not only compete but place in this international competition has been one of the greatest experiences of my career,” said Helmke. “I would
Relay” event.
like to express my gratitude to KOBELCO USA for this experience.”
“I share Kyle’s appreciation for the opportunity,” said Eck. “I also
want to thank our FSR Justin, technical trainer James and the other KOBELCO staff for helping me showcase my skills on the global stage. A special thanks to
Nomoto and Louis for guiding us through Japan — showing me places and experiences I may never have seen otherwise.”
The multi-day event combined
advanced diagnostics, equipment maintenance challenges and repair simulations. Beyond competition, participants were able to explore Japan, including cultural visits to Hiroshima and Tokyo — turning a professional milestone into a oncein-a-lifetime experience.
“Southeastern is very proud of Kyle and Byron,” said Kitrick Kay, director of product support. “We make training a priority and strive to instill problem-solving and reliability in our already amazing techs. It isn’t easy to be experts in so many different product lines, and we’re incredibly proud of their dedication.”
Southeastern Equipment’s relationship with KOBELCO reflects a shared commitment to excellence, reliability and continuous learning. Competitions like the Global Service Technical Contest allow technicians to refine their expertise, share best practices and bring that knowledge home to better serve customers in the field.
For more information, visit southeasternequip.com.
Max Busher (L), territory manager of Ditch Witch of Minnesota, makes a deal with Alan Lotthammer of Glacial Ridge Inc. on a Yanmar compact track loader, model Tl75VS - IC.
(L-R): Jonathan Confeld, sales and Fritz Wright, sales, of American Pressure, discuss their heated-water pressure washing machines with Andrew Mooney of Benny Transportation, St. Joseph, Minn.
GREEN from page 16
Northern Green is co-sponsored by the Minnesota Nursery and Landscape Association (MNLA) and the Minnesota Turf and Grounds Foundation (MTGF). For more information, visit NorthernGreen.org. CEG (All photographs in this article are Copyright 2026 Construction Equipment Guide. All Rights Reserved.)
Justin Smith, territory sales manager of Purple Wave Auction, said he received two good leads at the start of the show and had productive conversations with attendees.
Mike Isaacson (L), ground maintenance supervisor of Willmar Public Schools, asks about the options of an ASV skid steer with sales representative JT Kenngott of Quality Equipment.
Ron Ciolfi (L), erosion control specialist of Swanston Equipment, talks with George Garcia, territory sales of Trenchers Plus.
Equipment Corporation of America (ECA) announced the promotion of Pittsburgh branch manager Dave Johnston to vice president.
Johnston’s career in the construction equipment industry began with an associate degree in diesel mechanics from Williamsport Area Community College (Pennsylvania College of Technology), complemented by business coursework at Penn State University and Butler Community College. He served in the United States Marine Corps, graduating from Parris Island as Honor Man and was honorably discharged in 1984 with the rank of Corporal. He also has an extensive and successful background with major construction equipment suppliers in the Pittsburgh region.
Johnston joined ECA in 2017 as branch manager of the company’s Pittsburgh operation after an already successful career in the United States Marine Corps and the heavy equipment industry. Since then, he has played a pivotal role in driving sustained growth, expanding market presence and building high-performing teams.
Under Johnston’s leadership, the Pittsburgh branch has reached a record-setting revenue milestone in 2025. This growth reflects Johnston’s entrepreneurial mindset, strong customer focus and ability to identify and develop new opportunities. During his tenure, he successfully introduced
new product lines including Olin, Furukawa and Boart Longyear, while managing key vendor relationships and expanding ECA’s footprint in new markets.
Johnston also has been instrumental in developing innovative rental strategies, including pairing excavators with specialty attachments to serve emerging customer needs. His efforts have resulted in new customer relationships, the revival of long-standing partnerships and the successful expansion of ECA operations into Milwaukee, where he helped build and support the local team.
In his new role as vice president, Johnston will continue to manage both the Pittsburgh and Milwaukee branches while serving as ECA’s primary contact for Olin, Furukawa, Boart Longyear and Word. His broad industry experience, operational leadership and strategic vision will support ECA’s continued growth across North America.
“Dave’s leadership, work ethic and commitment to our customers exemplify the values we strive to uphold at ECA,” said Rod Kern, vice president of Equipment Corporation of America. “We’re excited to see his continued impact as vice president and look forward to the role he will play in driving our growth across North America.”
For more information, visit ecanet.com.
The American Road & Transportation Builders Association (ARTBA), a 124-year-old national advocacy group based in Washington, D.C., and AGC Nebraska, the state’s premier construction trade association, have announced a formal partnership to advocate for increased transportation investment.
“We are excited to welcome our newest chapter, AGC Nebraska, and its members to the ARTBA team at such a critical time,” said Dave Bauer, ARTBA president and CEO. “This alliance will greatly strengthen both our organizations as we push for the next federal surface transportation bill during the coming months.”
“ARTBA is a premier national organization that also provides unique resources for industry advocates at the state level,” said Katie Wilson, AGC Nebraska’s executive director. “They will reinforce our continued drive for the federal and state transportation funding needed to grow Nebraska’s economy.”
Congress is currently working to reauthorize the federal highway and public transportation programs by Sept. 30. According to U.S. Treasury data analyzed by ARTBA and posted on the group’s Highway Dashboard, $1.8 billion in
federal-aid highway funds was committed to Nebraska over the past four years, a catalyst for 719 new highway and bridge projects across the state.
Bauer noted that AGC Nebraska works closely with its congressional delegation, state officials and the Nebraska Department of Transportation, which also is an ARTBA member organization. All will be important to the coming federal reauthorization process.
AGC Nebraska’s heavy and highway construction contractors will enroll as ARTBA members. The association will be ARTBA’s exclusive Nebraska affiliate.
Founded in 1927, the new chapter is Nebraska’s only full-service, statewide construction trade association representing heavy, highway, bridge and municipal/utility contractors. It serves as the focal point for industry advocacy, information, education and networking.
AGC Nebraska joins 37 other ARTBA chapters from around the country. ARTBA’s unique “federation” membership structure includes 8,000 private and public sector members in the transportation design and construction industry.
For more information, visit artba.org and agcne.org.
martinequipment.com
Goodfield, IL 309-965-2502
Peru, IL 815-224-4711
Rock Island, IL 309-787-6108
Springfield, IL 217-528-4347
Tolono, IL 217-485-6755
Cedar Rapids, IA 319-365-0515
Dubuque, IA 563-588-1950 Columbia, MO 573-657-2154 Palmyra, MO 573-769-2274
murphytractor.com
Park City, KS 316-942-1457
Great Bend, KS 620-792-2748
Humboldt, KS 620-473-7020 Olathe, KS 913-298-7373
Topeka, KS 785-233-0556
Ulysses, KS 620-356-1071
Dodge City, KS 620-227-3139
Gering, NE 308-436-2177 Omaha, NE 402-894-1899
Lincoln, NE 402-467-1300
Grand Island, NE 308-381-0741
North Platte, NE 308-534-7020
Kansas City, MO 816-483-5000
Springfield, MO 417-863-1000 Des Moines, IA 515-263-0055
Fort Dodge, IA 515-576-3184
Sioux City, IA 712-252-2753 Waterloo, IA 319-235-7085 Brunswick, OH 330-220-4999 Cambridge, OH 740-439-2747 Canton, OH 330-477-9304 Cincinnati, OH 513-772-3232 Columbus, OH 614-876-1141 Jackson, OH 740-688-4100 Lima, OH 419-221-3666 Painesville, OH 440-639-0700
Poland (Youngstown), OH 330-629-6299 Rossford, OH 567-352-7001
Vandalia (Dayton), OH 937-898-4198
www.aisequip.com
Bridgeport, MI 989-777-0090
Grand Rapids, MI 616-538-2400 Lenox, MI 586-727-7502
New Hudson, MI 248-437-8121 Williamsburg, MI 231-267-5060
www.brookstractor.com
Madison (Sun Prairie), WI 608-837-5141 Milwaukee, WI 414-462-9790
Green Bay (De Pere), WI 920-336-5711
La Crosse (West Salem), WI 608-786-2644
Stevens Point (Plover), WI 715-254-2777
Racine (Mt. Pleasant), WI 262-898-6700 Sparta,WI 608-351-2101
www.lec1.com
Beaver, WV 304-255-1525
Cowen, WV 304-226-3299
Cross Lanes, WV 304-204-1818
Pleasant Valley, WV 304-534-5454
Norton, WV 304-636-6421
Marietta, OH
740-373-5255
Ashland, KY
606-327-1709
Pikeville, KY
606-432-0321
www.westsidetractorsales.com
Lisle, IL 630-355-7150
Rockdale, IL 815-730-9011
Rockford, IL 815-961-3160
South Holland, IL 708-331-6362
Wauconda, IL 847-526-7700
Bloomington, IN 812-333-9677
Fort Wayne, IN 260-482-8576
Indianapolis, IN 317-544-3411 Lafayette, IN 765-447-6933
South Bend, IN 574-232-1461
Terre Haute, IN 812-645-7160
When it came time to design our 460 P-Tier and 410 P-Tier Articulated Dump Trucks (ADTs), we decided to go straight to the source. We asked you what you needed and then took it from there. The end result: ADTs that deliver enhanced fuel efficiency, improved rear-camera display, a more comfortable cab, and optional onboard payload weighing. Proving that the proper inspiration can make all the difference.
JohnDeere.com/ADTs
mccoycf.com
Bemidji, MN 218-759-1996
Duluth, MN 218-722-7456
Grand Rapids, MN 218-326-9427
Ashland, WI 715-682-5522
Chippewa Falls, WI
715-834-2924
Merrill, WI 715-536-0633
Escanaba, MI 906-789-9054
Marquette, MI 906-789-7689
Fenton, MO
636-349-0200
Foristell, MO 636-463-2500
Mitchell, IL 618-931-1034
Mt. Vernon, IL 618-244-6800
Cape Girardeau, MO 573-334-0563
Paducah, KY 270-554-1131 Cuba, MO 573-885-0500
Owensboro, KY 270-684-2339
Evansville, IN 812-473-0484
Kingsport, TN 423-349-5001
Knoxville, TN 865-546-3207 Chattanooga, TN 423-855-0633
Nashville, TN 615-501-8600
Bowling Green, KY 270-842-3400
Louisville, KY 502-253-3721
Lexington, KY 859-788-3950
London, KY
606-862-8447
The Contractors Association of Will & Grundy Counties (CAWGC) announced two key leadership appointments effective Jan. 1, 2026.
Carla Montagano Liburdi has been named executive director, and Kristie Cichon has been promoted to membership and events director. Both have served the association in vital capacities since their hiring in May 2021.
Carla Montagano Liburdi
Liburdi has served as CAWGC’s director of finance and administration for the past five years, playing a crucial role in advancing operational efficiencies, strengthening member services and guiding major organizational initiatives. Her strong background in construction-related industries, combined with her experience in finance, project management and nonprofit leadership, has positioned her as a trusted voice and steadfast advocate for contractors across Will and Grundy Counties.
Liburdi brings deep industry roots and a passion for advancing the organization’s mission within the community. In her new role as executive director, she will lead the CAWGC’s strategic vision, champion member needs and continue the long-standing vision and values of supporting and promoting the interests of the construction industry through advocacy, education, networking and workforce development.
“I am honored to step into this role and continue serving the members who are the backbone of the construction trade industry,” said Liburdi. “I look forward to strengthening partner-
ships, expanding resources and ensuring CAWGC remains a strong voice for contractors, suppliers and professional partners.”
Since 2021, Cichon has supported CAWGC through her work in events coordination, member services and administrative support. Her enthusiasm, organizational skills and commitment to member engagement have made her an invaluable part of the CAWGC team.
As the new membership and events director, Cichon will lead the planning and execution of CAWGC’s annual programs, networking events and educational offerings. She also will oversee member services, ensuring the association continues to deliver value, connection and enhanced member engagement, and will continue providing support to contractors, suppliers and industry partners.
“I’m excited to take on this expanded role and to continue building strong relationships with our members,” said Cichon. “CAWGC is a remarkable organization, and I look forward to contributing to its growth and success.”
The board of directors expresses full confidence in both Liburdi and Cichon as they take on these new responsibilities. Their combined experience, passion for the industry and dedication to serving the members reflect the association’s ongoing commitment to leadership excellence.
“The CAWGC is entering a new chapter with a strong and capable team,” said Jason Cox, board chairman. “Carla and Kristie have demonstrated exceptional leadership and understanding of the needs of our membership. We are excited for what lies ahead.”
For more information, visit cawgc.org.
McCoy Construction & Forestry announced two leadership changes within the organization, reinforcing its commitment to excellence and growth.
Effective Jan. 5, Roy James assumed the role of vice president of rental and used equipment, while Andy Flinn succeeded James as vice president of Region 2, as he oversees locations in Illinois, Indiana, Missouri and Paducah and Owensboro, Ky. James brings more than 20 years of sales and operations experience in the construction equipment industry. Since
joining McCoy Construction & Forestry six years ago, he served as general manager of the Chippewa Falls location for three years before being promoted to Region 2 vice president, a position he held for more than three years.
Flinn also offers extensive industry expertise, with more than 20 years of experience, including the past four years as a regional sales manager for McCoy Construction & Forestry. For more information, visit mccoycf.com.
OHIO OHIO CAT
www.OhioCAT.com
Broadview Heights 440-526-6200
440-658-2000 (Rental) Cadiz 740-942-4626
740-942-6100 (Rental) Canton
330-244-2444
330-966-4674 (Rental) Cincinnati 513-771-0515
513-612-5600 (Rental) Columbus 614-878-2287
614-851-3737 (Rental) Lima
567-242-6860 (Rental) Perrysburg 419-874-7975
419-872-7368 (Rental)
Troy 937-335-7660
937-440-2900 (Rental) Upper Sandusky 419-731-2170
419-731-2060 (Rental)
Washington Court House
740-636-2429
740-636-2430 (Rental) Westerville 614-948-2828 (Rental) Youngstown 330-530-9010
330-799-1800 (Rental) Zanesville 740-453-0563
740-455-8400 (Rental)
ZIEGLER CAT
www.ZieglerCAT.com
Altoona
800-342-7002
Atlantic 877-547-3819
Sioux City 712-252-4401 Fort Dodge
800-342-1848 Mason City
800-342-1849
Postville
800-526-0889
KENTUCKY OHIO CAT
www.OhioCAT.com
Richwood 859-372-4665
859-282-4343 (Rental)
ABC Equipment Rental & Sales www.abcequipment.com
29 Pearl Rd. Brunswick, OH 44212 888/572-3888
38525 Chester Rd. Avon, OH 44011 440/934-7368
Alta Equipment Co. www.altaequipment.com
18405 115th Avenue Orland Park, IL 60467 844/GO2-ALTA
Central Power Systems & Services www.kubotacentral.com
1285 Acraway Street Garden City, KS 67846 620/765-3118
Yes Equipment & Services www.yesequipment.com
7001 Manufactures Drive Madison, WI 53704 888/310-3902
11715 W Silver Spring Road Milwaukee, WI 53225 888/310-3902
Lano Equipment www.lanoequip.com
6140 Highway 10 NW Anoka, MN 55303 763/323-1720
23580 Highway 55 Loretto, MN 55357 763/479-8200
3021 West 133rd Street Shakopee, MN 55379 952/445-6310
McCullough Kubota www.mckubota.com
7225 Grand Ave. Gurnee, IL 60031 224/699-2200
1966 N. State Rt. 1 Watseka, IL 60970 815/432-3965
4620 W. US-6 Morris, IL 60450 815/942-6620
21730 LaGrange Rd Frankfort, IL 60423 815/658-2682
Taking the time to schedule a site consultation can make a big difference in the success, efficiency and value of your project, said Survey Systems Atlanta.
Site consultants “serve as an essential foundation for planning, budgeting and mitigating potential issues that might otherwise cause costly delays,” said the company.
“A professional site consultation is a structured evaluation of a proposed construction site conducted by experienced experts,” according to a Survey Systems article.
A thorough review of the property includes its natural characteristics, existing structures and any potential challenges that could affect the build.
Survey Systems said the goal is to provide property owners, developers and construction teams a comprehensive understanding of the site’s conditions.
“By assessing critical factors early on, site consultations allow decision-makers to make informed choices,” the company’s article said.
The decision-making process, then, ensures that the project is feasible, safe and aligned with the desired goals.
No operation is too small to benefit from a professional site consultation, preaches Caterpillar. The company asks contractors to consider the following:
• Do you wonder if you’re getting the most out of your equipment?
• Are you frustrated by how much it costs to keep equipment working?
• Do you spend too much time on things other than getting the job done?
“You could benefit from the second set of eyes — and expert recommendations — a site evaluation brings,” according to Cat.
In an article on professional evaluations, the company wrote that you don’t have to run a massive operation to benefit from an expert site evaluation.
“Even the smallest sites can take advantage of a fresh perspective, best practices and lessons learned from around the world,” said the company.
“And even minor changes can
Adobe Stock photo
When you have your site evaluated, you, the contractor, get to decide what you want the consultant to focus on. You provide the background about your operations including any solutions you seek to the challenges you face.
make a big difference to your bottom line” in a typical site evaluation, which starts with information gathering.
As the contractor, you provide the background about your fleet and operation. That includes any “pain points” or problems you want to solve. A small team of system application specialists visits your site for a couple of days working with you to collect and analyze data and set benchmarks.
“When they’re done,” wrote Cat, “you receive a report with results and site-specific recommendations.”
A team of application specialists will visit your job site for the evaluation. Over a couple of days, they’ll work with you to collect and analyze operations data before setting benchmarks for you and your team.
Those recommendations can include “quick wins, long-term improvements and hard data to help you measure results.”
What you choose as the focus of your jobsite evaluation depends on your specific needs. A consultant can help you home-in on that before you start.
During Cat site evaluations, the company looks at the contractor’s fleet system, match and utilization as well as his or her load and hauling tool systems.
The company also will evaluate jobsite layout and haul roads; technology match; equipment operation; and fuel consumption and idle management.
Finally, the consultant will study the contractor’s equipment, work tool and ground-engaging tool configuration.
“A consultation can tell you if you’re operating the right (and right amount) of machines,” said Cat.
It can reveal ways to streamline maintenance, burn less fuel or save on repairs, the company added.
“And it can uncover opportunities
become very easy to lose sight of your financial constraints,” the company wrote. “This consideration has been a particularly concerning issue in light of the soaring costs of construction materials.”
A construction management consultant can help alleviate these challenges by documenting costs associated with the project, said zumBrunnen.
A consultant will monitor a projects progress through each phase, said the construction consulting firm. “They will ensure that the various contractors … involved in the project are doing their part to produce a quality structure.”
And if an issue arises, the consultant will address it immediately before notifying stakeholders so they can take appropriate action, said zumBrunnen.
A site consultant offers the contractor access to valuable industry knowledge, can answer questions and address concerns.
to make your site more efficient and your operators more productive.”
Survey Systems said the consultation starts with a professional walking the property, taking detailed notes.
The consultant might use specialized equipment to examine soil quality, topography, drainage and existing utilities, the company said.
“This insight forms the basis for a more strategic approach to the construction process,” said Survey Systems.
It also helps to identify obstacles before they become expensive problems, the survey company stressed.
“Professional site consultations are becoming a standard practice for those serious about efficiency and long-term planning,” the company said.
Construction consulting firm
zumBrunnen offers five reasons to hire a construction management consultant. The number one reason is cost savings.
The construction management firm recognizes that one of the most pressing challenges to any construction project is staying on budget.
“When a major construction project is in full swing, it can
“They can also help you more effectively relay information to key stakeholders by providing … detailed reports on the state of the project,” said zumBrunnen.
A consultant can “significantly” reduce the chances you as the contractor will experience a major project delay.
“Construction consultants are well versed in managing all facets of large-scale projects,” said zumBrunnen.
“Finally, a construction management consulting firm will take the weight of the world off of your shoulders,” added the company. “They will serve as a buffer” among stakeholders, subcontractors, engineers and the site owner.
This role makes the entire construction project far less stressful, noted zumBrunnen.
“If an issue does come about, the consultant can guide you to the most appropriate resolution.”
Survey Systems believes engaging in site consultations before construction begins offers numerous advantages, including early assessment and planning. Understanding the site’s characteristics from the outset allows stakeholders to make strategic decisions about project layout, material selection and construction methods.
“This foresight can prevent costsee DILIGENCE page 66
Bergkamp announced the launch of the Journeyman mobile mix plant, its first entry into the cold central plant recycling (CCPR) market.
This move marks a significant expansion of Bergkamp’s innovation into cold recycling technologies, building on decades of expertise in slurry and micro surfacing solutions. Journeyman represents a new standard of innovation, craftsmanship and operator-first design in CCPR, according to Bergkamp.
“The Journeyman brings the Bergkamp commitment to quality and customer support into a category that’s ready for a better experience,” said Scott Bergkamp, president of Bergkamp. “It’s built to make CCPR more intuitive, more consistent and more reliable
from day one.”
The inspiration for Journeyman came from the field. Several of Bergkamp’s customers — many already working in cold recycling — expressed a need for more operatorfriendly equipment that could bridge the gap between performance and usability.
Bergkamp began its development process in 2017, building and testing an early prototype to validate performance and operator experience. Rather than retrofitting existing equipment or rushing to market, the team spent years refining the concept — drawing on the success of its EMCADS control technology and direct input from contractors and
see BERGKAMP page 46
www.aisequip.com
3600 N Grand River Ave Lansing, MI 48906
517-321-8000
Grand Rapids
600 44th Street SW Grand Rapids, MI 49548
616-538-2400
Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502
Saginaw 4600 AIS Drive Bridgeport, MI 48722 989-777-0090
Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060
West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121
www.butlermachinery.com
3630 Miriam Ave Bismarck, ND 58502
701-223-0890
7910 US-2
Devils Lake, ND 58301 701-665-3800
2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400
3402 36th St SW Fargo, ND 58104 701-280-3100
1201 S 46th St Grand Forks, ND 58201 701-775-4238
1910 27th Ave SE Jamestown, ND 58401
701-251-1400
4950 U.S. Highway 12 Aberdeen, SD 57401 605-225-6240
3601 Deadwood Ave N Rapid City, SD 57702 605-342-4850
20571 Truck Stop Ave Pierre, SD 57501 605-224-5400
3201 N Louise Ave Sioux Falls, SD 57107 605-336-3010
603 10th St NW Watertown, SD 57201 605-954-7100
1715 US Hwy 14 W Huron, SD 57350 605-353-1200
1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508
www.centralsands.com
4219 E 50th St • Des Moines, IA 50317 800-247-2400 • 515-964-8600
www.rbscott.com
1011 Short St Eau Claire, WI 54701 715-832-9792
17403 County Road 75 NW Clearwater, MN 55320 320-558-8100
www.roadbuildersmachinery.com
1001 S 7th St Kansas City, KS 913-371-3822
4115 S 90th St Omaha, NE 402-331-9200
5601 Fletcher Ave Lincoln, NE 402-325-0447
4949 Juergen Rd Grand Island, NE 308-384-2620
1303 S Chestnut St Norfolk, NE 402-316-4640
Epiroc USA, a productivity partner of the mining, drilling and infrastructure industries, announced the appointment of G.W. Van Keppel Co. as its authorized dealer partner in Oklahoma, Texas, Kansas and Missouri.
G.W. Van Keppel is an established distributor in the equipment industry with an extensive history.
Founded in 1926 and headquartered in Kansas City, Mo., G.W. Van Keppel is a distributor of heavy equipment, drilling systems and consumables with multiple branch locations.
The company said it brings many years of industry experience, strong customer relationships and a commitment to quality service. G.W. Van Keppel is still owned and managed by third- and fourth-generation Van Keppel family members.
G.W. Van Keppel serves customers through branch locations in Fort Worth and New Braunfels in Texas; Tulsa and Oklahoma City in Oklahoma; Garden City, Kansas City, Topeka and Wichita in Kansas; and Joplin, Kansas City and Springfield in Missouri.
The company said it can supply local service expertise, fast parts delivery and proactive service for Epiroc customers in aggregates, construction and drilling markets.
“G.W. Van Keppel’s strong reputation, customer loyalty and focus on the aggregates market make them an outstanding partner for Epiroc,” said Todd Courtney, Epiroc USA sales manager — construction and partners. “We are
excited to welcome them to our network and look forward to the value they will bring to our customers in these regions.”
“Van Keppel is excited to partner with Epiroc,” said Sam Hayes, G.W. Van Keppel’s aggregate division manager. “Integrating Epiroc’s lineup into our existing portfolio allows us to better support our entire customer base.
By bridging Van Keppel’s renowned service with Epiroc’s innovative technology, we’re delivering a solution that delivers maximum value to our customers.”
Effective November 2025, G.W. Van Keppel assumed the dealer responsibil-
ities in the dedicated territories. Together, both organizations said they are committed to maintaining uninterrupted support for customers throughout the territory, with an emphasis on responsive service, reliable parts availability and long-term partnerships.
As the new distribution structure takes effect, Epiroc said it remains focused on strengthening its dealer network, expanding local expertise and delivering products and solutions.
For more information about G.W. Van Keppel, visit vankeppel.com.
For more information about Epiroc USA, visit epircoc.us or call 844/4374762.
5255 N Deere Rd Park City, KS 67219 316-942-1457
325 S Highway 281 Great Bend, KS 67530 620-792-2748
1141 Kanza Drive, Humboldt, KS 66748 620-473-7020
15854 S US 169 Hwy Olathe, KS 66062 913-298-7373
1621 NW Gage Blvd Topeka, KS 66618 785-233-0556
1410 W Oklahoma Ave Ulysses, KS 67880 620-356-1071
10893 112 Rd Dodge City, KS 67801 620-227-3139
220810 Hwy 92 Gering, NE 69341 308-436-2177
9751 S 148th St Omaha, NE 68138 402-894-1899
6100 Arbor Rd Lincoln, NE 68517 402-467-1300
3204 S Engleman Rd Grand Island, NE 68803 308-381-0741
3701 S Jeffers St North Platte, NE 69101 308-534-7020
8600 NE Parvin Rd Kansas City, MO 64161 816-483-5000
1401 S State Highway MM Springfield, MO 65802 417-863-1000
5087 E Broadway Ave Des Moines, IA 50317 515-263-0055
1303 3rd Ave NW Fort Dodge, IA 50501 515-576-3184
4900 Harbor Dr Sioux City, IA 51111 712-252-2753
3469 W Airline Hwy Waterloo, IA 50704 319-235-7085
An Epiroc SmartROC D65 drill commissioning
1801 Watterson Trail Louisville, KY 40299 502-491-4000
17000 Highway 41 North Evansville, IN 47711 812-425-4491
7310 Venture Lane Fort Wayne, IN 46818 260-489-4551
erettekonphrbuilttotaTey’ bere achallengeformanysc
screeningparameteradjust
adapttonewoperatingcon
operabilityFull-sizeorcom
coarsereeningplants. sc
gingloc f
MSS802EVO exibilityand caneasily aandsimple eningplants pationscan lic
Metso saw record sales of stirred mills in 2025 as mining customers opted for more energy-effi cient grinding solutions.
In minerals processing, there is growing demand for optimized tech nology combinations and multi-stage grinding to boost energy efficiency and reduce carbon emissions, as well as to improve productivity with optimized operating costs, according to Metso.
In milling, these can be achieved by using Metso’s Vertimill and HIGmill stirred mills and highpressure grinding (HPGR) technology. Overall throughput and recovery can be further enhanced by combining the stirred mills with concorde cell flotation technology, according to Metso.
In 2025, Metso sold more than 20 Vertimill grinding mills with a combined installed power of 67 MW. With these stirred mills delivering up to 35 percent energy savings compared to conventional ball mills, the total power saved amounts to approximately 36,550 kW.
This reduction is equivalent to avoiding 135,000 tons of CO2 emissions annually, based on 8,500 operating hours per year. To put this in perspective, the emissions savings are comparable to the annual carbon footprint of approximately 20,200 people, using the Finnish per capita average of
6.7 tons of CO2.
“The growing preference for stirred milling technology extends not only to established markets but also to new regions where this technology has previously not been considered,” said Alan Boylston, vice president, stirred mills of Metso. “Additionally, many existing concentrator plants are choosing to enhance their operations with add-ons to incorporate these solutions. Stirred mills are now increasingly being deployed in secondary and tertiary grinding applications, handling a wide range of ores including copper, gold and iron ore. Our comminution solutions portfolio is focused on futureoriented, energy-efficient technologies to meet our mining customers’ diverse requirements and support them with value-adding services.”
Metso has a leading stirred milling technologies portfolio, consisting of
Vertimill, HIGmill, stirred media detritor (SMD) mills, and vertical power mills (VPM). These mills are based on gravity-induced and fluidized technologies, allowing for an equipment solution for all comminution circuits in secondary, tertiary, fine, ultrafine, regrind and lime slaking applications.
Stirred mills are part of the Metso Plus offering — a qualified group of selected Metso products, services or digital solutions that provide significant environmental performance improvements. We also provide digital solutions as well as extensive support through a global network of service and repair centers.
With more than five decades of expertise in stirred mill technology, Metso has developed, tested and delivered approximately 1,000 stirred mills to hundreds of sites worldwide.
For more information, visit metso.com/mining/grinding/grind ing-mills/stirred-mills/.
operators, according to Bergkamp
That vision never changed: deliver technology that lowers the learning curve; reduces customer entry costs; and raises expectations for what a CCPR plant can be, according to Bergkamp.
The result: a machine engineered for precision, simplicity and uptime. Journeyman integrates proprietary automation and metering controls that reduce calibration time, while maintaining the rugged durability and features that define
For more information, visit bergkampinc.com. BERGKAMP from page 41
Bergkamp equipment, according to Bergkamp. It brings flexibility and precision to the job site, capable of producing mixes with 100 percent RAP, 100 percent virgin aggregates and any blend in between.
“At Bergkamp, we take pride in building equipment that just feels right to use — day after day,” said Bergkamp. “Journeyman reflects that philosophy. It’s the product of listening to customers, designing with the operator in mind, and refusing to compromise on quality.”
ARE NO MA ,, ATTCH FOR A B From roadways to right-of to road clearing, get your w more efficiently than ever machinery! Choose from d sizes to suit your needs. C yours or to request a dem , BANDIT® -ways, lot clearing ork done faster and before with Bandit ifferent styles and all today to reserve onstration.
www.rolandmachinery.com
Escanaba, MI
906-786-6920
DePere, WI
920-532-0165
DeForest, WI
608-842-4151
Eau Claire, WI
715-874-5400
Franksville, WI
262-835-2710
Schofield, WI
715-355-9898
Slinger, WI
262-644-7500
www.rmsequipment.com
Savage, MN
800-888-9515
Des Moines, IA
800-555-1445
Cedar Rapids, IA
800-616-6615
Sioux City, IA
800-633-9104
East Moline, IL
800-633-9114
Duluth, MN
800-888-9535
Virginia, MN
800-752-4304
www.vlpco.com
4100 Gardner Avenue
Kansas City, MO 64120
866-928-4055
816-241-9290
Garden City, KS
800-511-1435
Joplin, MO
417-781-8222
Topeka, KS
785-267-4345 Wichita, KS 316-838-3346
www.brandeismachinery.com
Bowling Green, KY
270-780-3004
Corbin, KY
606-528-3700
Lexington, KY
859-259-3456
Louisville, KY
502-491-4000
Paducah, KY
270-444-8390
Stanville, KY
606-478-9201
Evansville, IN
812-425-4491
Ft. Wayne, IN 260-489-4551 Indianapolis, IN 317-872-8410
Coming In: (2019) Sandvik DX800, with approx 8700 hrs & 3100 impact hrs on HF820 hammer. Running & working currently.
#510099-Tamrock DHA550 self-contained hydraulic drill, Deutz air cooled engine. Has 1185 impact hours. Good condition.
#580000-Furukawa HD712 drifter, approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation.
#530029 Ingersol Rand ECM370, self-contained rock drill w/ VL140 hammer & Cummins engine.
#510138 (2022) John Henry JH20 drill on Komatsu PC210LC with 3489 hours & 1500 drifter hrs. John Deere compressor and 4045 Tier 3 engine. Set up for T51 steel w/ 20′ lead & 18′ changes.
#510137 (2005) Atlas Copco ECM-585 MC with 9461 hrs on Cummins engine (been replaced) & 6782 impact hours.
#520036 (2006) INGERSOL-RAND P185 PORTABLE/TOWABLE AIR COMPRESSOR, 82 HOURS
ROCK CRUSHERS & FEEDERS
#1111085 Portable Pioneer 3042 jaw with 42"x16' VGG, 42" underconveyor, & 150hp motor on shopbuilt chassis.
#118000-New/never used Universal 2036 jaw crusher parts, including: Jaw plates, toggle seats, toggle plates, spring loaders, and all thread rods.
#111083 (2015) KLEEMAN MZ110i TRACK-MOUNTED JAW CRUSHER, (27X43″) with 5374 HRS
#111080 (2023) RubbleCrusher RC150T portable, diesel/hydraulic, self-contained 26"x14" jaw crusher, on rubber tracks with 420 hours. 38hp Yanmar engine. 64"x50" feed hopper & discharge conveyor. #121054 (1996) CEDARAPIDS MODEL 2100 VSI CRUSHER, 4-SHOE TABLE, ROCK SHELF, & 300HP MOTOR
SCREENS & WASH EQUIPMENT #141172 (New) Anaconda SR514 3-deck finishing screen hydraulic tip grizzly (4”) on 14’ hopper with 4-ply belt feeder and radio remote. 125 hp JCB 444 engine. Variable speed on all stockpile conveyors & reversable transfer conveyor. #152027 Ortner model 3000 sandscrew. with 5hp electric motor. Rated at 50-125 TPH capacity. Very Good Condition. #141175 (2023) Finlay 883T scalping screen, 1" screen in top deck & 3/4" screen on bottom. Good cond. #142003-Deister 5x16 2-deck horizontal, underslung screen with new bearings
#141167 Deister BHT2616 (6x16 2-deck) screen, with 218 hrs on Deutz engine. Apron feeder & 3 discharge conveyors.. #142005 El Jay 5x14 2-deck screen on single axle chassis. electric motor & 36" x 24' underconveyor
#640055 (2021) Sany SY265CLR long-reach excavator (60'), 1750 hrs, Cummins QSB6.7 T4F engine, 190 hp, 70,000lb shipping weight. Has A/C, heat, & radio. Max reach at ground level 57' 9" & max digging depth 43'9", 31" track pads, 60" digging bucket, & plumbed for hydraulic mower. 1-owner machine. Remainder of 5 yr / 5000 hour warranty (though Jan 2026).
#610137-1995 John Deere 644G Loader, unknown hours and 3 3/4 yard bucket. Good rubber and runs great, overall good condition. #410063-CAT D9H, EROPS cab w/ A/C, straight blade w/tilt. Single shank, 4-barrel ripper. 24" pads. U/C (overall approx 70%). Rebuilt engine, trans, and finals (HMR 2994) Left Trunnion is available but needs to be installed. Overall good condition.
The Associated General Contractors of Minnesota Foundation (AGC of MN Foundation) has been awarded a $450,000 state grant through the Minnesota Department of Labor and Industry to lead a bold, statewide initiative addressing the mental health crisis and high rates of suicide within Minnesota’s construction industry.
At the heart of this initiative is the creation of the Minnesota Construction Mental Health Alliance — a lasting, industry-wide coalition of contractors, labor leaders, apprentices and project owners dedicated to embedding mental wellbeing into the foundation of construction safety.
Construction consistently ranks among the industries with the highest suicide rates nationwide. Behind these statis tics are fathers, mothers, sons and daughters — and a growing recognition that true jobsite safety must include mental and emotional wellbeing along with physical protections.
In partnership with the Minnesota Building and Construction Trades Council and Mercury Creative Group, the AGC of MN Foundation will lead a comprehensive, evidencebased effort to change the cul ture of mental health in construc tion across Minnesota.
“This grant represents a major step forward in acknowledging that mental health is a construction safety issue that must be addressed and valued at the same level as physical safety,” said Tim Worke, AGC of Minnesota CEO. “By working side by side as contractors, labor and project owners, we can save lives and build a healthier, more supportive construction workforce.”
cial construction market in rural and urban regions, and both public and private projects. Historically under-resourced communities will be prioritized to ensure equitable access to training and support.
• Suicide Prevention Training: Expansion of VitalCog in Construction Suicide Prevention Training, providing workers and leaders with the tools to recognize warning signs, respond effectively and normalize help-seeking behaviors.
• Apprenticeship Mental Health Curriculum: Development of a culturally responsive, multilingual mental health curriculum integrated into registered apprenticeship programs statewide, reaching more than 1,500 apprentices.
• Leadership and Systems Change: Creation of the Minnesota Construction Mental Health Alliance, a coalition of contractors, labor leaders and project owners committed to making mental health a standard safety expectation across the industry.
Year one will focus on curriculum development, leadership frameworks and expanded training. Year two will emphasize statewide implementation, accountability and long-term sustainability, ensuring that this work continues well beyond the grant period.
The initiative will serve Minnesota’s entire construction community: apprentices, tradespeople, supervisors, contractors and company leaders across all sectors of the commer-
543 S Rohlwing Rd. Addison, IL 60101 630-627-0000
1360 N Rand Rd. Wauconda, IL 60084 847-526-9444
23921 S Northern Illinois Dr. Channahon, IL 60410 815-467-4480
www.McCannOnline.com
W250 N6851 Hwy 164 Sussex, WI 53087
262-246-5700 Fax: 262-246-5719
DeForest, WI 608-222-9191
“This partnership demonstrates what’s possible when labor and employers come together with a shared commitment to supporting people,” said Tom Dicklich, executive director of the Minnesota Building and Construction Trades Council. “This initiative will help ensure every worker has access to the resources they need to keep them safe, both physically and mentally.”
For more information, visit: constructionmentalhealthmn.org. logo
“This partnership demonstrates what’s possible when labor and employers come together with a shared commitment to supporting people.”
Tom Dicklich Minnesota Building and Construction Trades Council
Eau Claire, WI 715-832-3443 De Pere, WI 920-338-5800
Marathon, WI 715-443-6000
Negaunee, MI 906-475-4181
www.miller-bradford.com
Braedon Russell of True Attachments showcased the company’s aftermarket buckets, quick couplers and thumbs.
MB Crushers displayed its wide range of crushing and screening buckets, as well as other attachments for excavators, backhoe loaders and skid steers. Pictured with the company’s popular BF70.2 crusher are Bryan Sims (L) and Stefano Leghissa.
CONDEX from page 19
AED was founded in 1919 by Morton R. Hunter and serves the construction, mining, forestry, power generation, agricultural and rental industries. For more information, visit aednet.org. CEG
(All photographs in this article are Copyright 2025 Construction Equipment Guide. All Rights Reserved.)
Joel Frost of Topcon touts the LN160, which is a compact, self-leveling 3D layout tool designed to improve productivity on construction sites.
Paul Barlow, president of HUDDIG Inc., displayed the 1370 all-in-one machine, which handles all construction and utility works in almost any terrain.
Roberson, area sales manager.
The magic man showed off his card tricks at the Morgan Stanley booth.
1801 Watterson Tr. Louisville, KY 40299 502/491-4000
Bowling Green, KY 270/780-3004
Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Evansville, IN 812/425-4491 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551
& SUPPLY CO.,
www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606
www.ceceq.com
3600 N. Grand River Ave.
Lansing, MI 48906
517/321-8000
ROLAND MACHINERY CO.
www.rolandmachinery.com
816 N. Dirksen Parkway, Springfield, IL 62702
217/789-7711
Bolingbrook, IL
630/739-7474
Carterville, IL
618/985-3399
East Peoria, IL
309/694-3764
Marengo, IL
815/923-4966
Portage, IN
219/764-8080
Escanaba, MI
906/786-6920
Bridgeton, MO
314/291-1330
Cape Girardeau, MO
573/334-5252
Columbia, MO
573/814-0083
Palmyra, MO
573/769-2056
DePere, WI
920/532-0165
DeForest, WI
608/842-4151
Eau Claire, WI
715/874-5400
Franksville, WI
262/835-2710
Schofield, WI
715/355-9898
Slinger, WI
262/644-7500
“The contractors worked 60 to more than 100 feet above the river in freezing, windy conditions to prepare the bridge and install the explosive charges,” said Iowa Department of Transportation (Iowa DOT) district engineer Clayton Burke. “We had visitors from all over show up. There were many people involved with the development of the project, family members and thousands of others that packed local businesses and lined the highway to watch.”
Almost 50 tradesmen and a number of engineering and management staff were on hand to safely execute the implosion.
“There are many dangers to this work, and it needs to be carried out by experienced professionals,” said Burke. “The very cold weather was a challenge for everyone outside. Connecting the wires to the explosives took almost two extra hours, but it was better done safely than quickly.”
Burke, who serves as project manager for the new Mississippi River bridge, stressed that keeping everyone out of harm’s way was the main concern.
“People want to get close to the bridge for a good view. It was critical that no one was within the restricted zone when the charges were detonated. This bridge also poses a unique challenge in that the Iowa section of the truss needs to stay standing due to its proximity to houses, streets and the railroad. Ensuring this section remained stable after the implosion was a concern as well.”
Burke noted that implosion was the safest and most efficient way to begin the demolition of the existing bridge. The contractor, Kraemer North America, prepared the structure for the explosive charges, and subcontractor Veit set and detonated them. A separate subcontractor, Energetic Services, performed some of the pre-cutting of the steel truss.
“The first step was to remove the steel grate bridge deck and traffic railings from the existing structure,” said Burke. “To do this, the contractor used cutting blades and torches to cut the deck and railing into pieces. They used a telehandler to transport the pieces away from the bridge. Kraemer used torches to pre-cut the steel truss at each location where a charge was to be placed. After the bridge was prepared, Veit placed copper shape charges at the pre-cut locations, wired the charges and then detonated them.”
Once most of the steel truss is in the river, crews use cranes, lifts and torches to cut the top cord of the truss and lift manageable pieces out of the water onto barges, with the steel transported to shore to be cut into smaller pieces by excavators with large shears. Removing the remaining Iowa portion of the truss involves placing temporary
shoring towers under the joints of the remaining truss. That’s followed by carefully cutting the truss into smaller panels and doing away with them, section by section.
To remove the concrete piers, barges and excavators with large hammers are required to carefully chip them down. The pier in the river is chipped down to just above the river level. Charges must then be drilled into the pier so they are well below the water level. The charges are detonated below the water level to break the pier into small pieces. All of the pieces of the pier must be removed using long reach excavators on barges. Finally, the protection cells are removed by breaking up the concrete caps with large hammers on excavators floating on barges.
The steel sheet pile is pulled by a crane using a vibratory hammer. The final cleanup
Stellar Industries has continued its longstanding tradition of giving back to local Iowa communities with a combined donation of $34,561 to the United Way of North Central Iowa.
Each year, Stellar employees raise funds throughout the holiday season, with Stellar matching those contributions. The annual effort reflects the company’s commitment to strengthening the communities where its team members live and work.
“It’s inspiring to see our team come together each year to give back to such a meaningful organization,” said David Zrostlik, president of Stellar.
Stellar Industries photo Stellar Industries has continued its longstanding tradition of giving back to local Iowa communities with a combined donation of $34,561 to the United Way of North Central Iowa.
“Supporting United Way is truly an honor, and we’re grateful to play a small part in making a positive difference in our local communities.”
Stellar’s support for United Way is part of the company’s broader corporate giving program, which focuses on investing in local organizations, education and social services across the area where it operates. At Stellar, charitable giving reinforces the company’s purpose beyond its products and services by contributing to organizations that help enhance and improve the community.
To be considered for Stellar’s corporate giving program, interested parties can complete and submit an online application form. A team at Stellar reviews donation requests monthly. Details regarding the application process and eligibility criteria can be found at stellarindustries.com/donationrequest/.
For more information, visit stellarindustries.com.
Find the latest commercial vehicles plus everything it takes to transform a “truck” into a “work truck” at Work Truck Week 2026.
Explore dozens of new products and companies in the sold-out Work Truck Show exhibit space and experience new vehicles during Ride & Drive.
Work Truck Week runs March 10-13, 2026, at Indiana Convention Center in Indianapolis. It encompasses The Work Truck Show, Green Truck Summit, NTEA Annual Meeting, Work Truck Week Ride & Drive, educational program and more. Green Truck Summit is March 10, educational sessions run March 10-12, Work Truck Show exhibits are open March 11-13 and Ride & Drive runs March 11-12. Work Truck Week, North America’s largest work truck event, is produced by NTEA — The Work Truck Association.
“Work Truck Week showcases the innovation of the commercial vehicle industry, including the many ways truck-
mounted equipment, bodies, components, accessories and technology applications are configured to create customized vehicles that work harder and smarter,” said Steve Carey, NTEA president and CEO. “There is no better place to discover the latest developments in an industry that never stops inventing.”
Many exhibiting companies are already highlighting new
products they plan to feature at Work Truck Week. Get the details from the Work Truck Week Product Gallery at wtw26.mapyourshow.com. Filter by “new” to see the latest products, including vehicles, organization systems, bodies, cameras, lights, truck beds, safety systems, coatings, flooring and more.
Get behind the wheel of commercial vehicles with the latest technology, fuel, sustainability offerings and propulsion systems at Work Truck Week Ride & Drive March 11-12. More details about featured vehicles will be released in the weeks ahead.
In addition to new products, Work Truck Week offers opportunities to discover new suppliers, with more than 50 companies exhibiting for the first time. Twenty-five are in the new exhibitor pavilion located in Rooms 137–139 across from the Hall I Work Truck Show exhibit hall entrance. It opens an hour before the main exhibit hall on March 11–12. For more information, visit worktruckweek.com.
Drake-Scruggs Equipment Inc. of Springfield, Ill., has added the Thunder Creek Equipment lineup of mobile fuel and lube trailers, truck upfits and skids to its equipment offerings serving utility companies, municipal fleets and commercial contractors throughout Illinois and Missouri.
Equipment models available at DrakeScruggs Equipment include the no-hazmat fuel and service trailer (MTT) and its truck upfit counterpart the no-hazmat fuel truck upfit (MTU), along with lube solutions like the multi-tank oil trailer (MTO), service and lube trailer (SLT) and the service and lube truck upfit (SLU). The distributor also will offer Thunder Creek’s lineup of fuel and lube skids.
“Drake-Scruggs is passionate about con-
necting our customers with equipment that helps them solve real problems, make actual progress and offer tangible ROI,” said Lucas Shelton, chief operating officer of Drake-Scruggs Equipment Inc. “We believe the Thunder Creek lineup offers all of those things for our customers and we’re excited to share the benefits with them.”
Larry Lea, vice president of sales of Thunder Creek Equipment, reinforced that message.
“Drake-Scruggs stands out as a proven, highly capable partner with deep relationships in the utility and construction sectors,” she said. “Their team has the expertise and presence to deliver Thunder Creek’s solutions with exceptional confidence and quality. We’re proud to have them championing the Thunder Creek brand.”
For more information, visit drake-scruggs.com and thundercreek.com.
is expanding availability of its PACCAR TX-12 PRO
Kenworth is expanding availability of its PACCAR TX-12 PRO automated transmission, bringing it to several models within the company’s medium-duty line.
Ranging from Class 7 to light Class 8, the vocational transmission is available on the Kenworth T380 and T480, when matched with the PACCAR PX-9 engine.
The PACCAR PX-9 can be spec’d with peak horsepower ranging between 260- and 380 for on-highway and vocational use; up to 450 hp with 1,250 lb.-ft. of torque for fire service vehicles.
“Versatility and durability are what the Kenworth T380 and T480 are all about,” said Kevin Haygood, Kenworth’s assistant general manager of sales and marketing. “For customers who prefer an AMT [automated manual transmission] over an automatic option, the TX-12 PRO is the solution. It gives customers great performance and toughness when they use the T380 or T480 in demanding vocational applications.”
The PACCAR TX-12 PRO was designed for rugged service and low-end drive performance applications like dump truck, snowplow or in chassis-
mounted tanker configuration, according to Kenworth.
In addition, the TX-12 PRO features an extreme-duty clutch for low-speed maneuvering and Rock Free mode to help trucks get unstuck in mud or sand. Plus, it has an off-highway calibration tuned for changing soil conditions. The 12-speed gear set provides wide ratio coverage, allowing for excellent maneuverability without sacrificing fuel economy at highway speeds.
For those applications requiring a PTO, The TX-12 PRO is available with dual openings — a bottom mount 8-bolt and 4-bolt rear mount for a combined 95 hp capacity.
To monitor performance and to ensure long-life, the transmission and clutch are both equipped with internal oil temperature sensors. Their temperatures can be displayed on the in-cab 7-in. digital display and can provide driver notifications in situations causing excessive temperatures.
Oil maintenance intervals for the TX12 PRO are 250,000 miles and the clutch is maintenance-free.
For more information, visit paccarpowertrain.com/.
Farm-Rite Equipment Inc.
www.farmriteequip.com
Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325
320-275-2737
Toll Free: 888-679-4857
Willmar 1515 West Litchfield Ave. Willmar, MN 56201
Toll Free: 877-484-3211 320-235-3672
St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304
Toll Free: 844-262-2281 320-240-2085
Long Prairie 19612 US Hwy 71 Long Prairie, MN 56347 Toll Free: 866-514-0982 320-732-3715
Diamond Equipment, Inc.
www.diamondequipment.com
Indiana 1501 Lynch Road Evansville, IN 47711
Toll Free: 800-258-4428
812-425-4428
2000 Harlan Drive Terre Haute, IN 47802
Toll Free: 888-343-4747 812- 299-4747
Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273
Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061
McCann Industries, Inc. www.McCannOnline.com
Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000
Bolingbrook
250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770
Channahon
23921 S. Northern Illinois Drive Channahon, IL 60410 815-467-4480
Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200
Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110
Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800
Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800
Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545
Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444
Marne 1064 Franklin Street Marne, MI 49435 616-371-7250
Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 Ziegler CAT www.zieglercat.com
8000 County Road 101 East Shakopee, MN 55379 800-352-2812
13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847
Alta Equipment Company www.altaequipment.com
8840 Byron Commerce Drive SW Bryon Center, MI 49315 616-878-7450
56195 Pontiac Trail New Hudson, MI 48165 248-356-5200 1061 Stepke Court Traverse City, MI 49685 231-714-6210 5105 Loraine Street Detroit, MI 48208 313-394-1811
G 3283 S Dort Hwy Burton, MI 48529 810-744-4840
3725 Old 27 S Gaylord, MI 49735 989-731-9988
7500 E 15 Mile Rd Sterling Heights, MI 48312 568-474-5063 1035 Wylie Drive Bloomington, IL 61705 309-585-3800
613 E Stevenson Rd Ottawa, IL 61350 815-313-2070
www.companywrench.com
4805 Scooby Lane Carroll, OH 43112 866-294-6103
1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850
1330 KY-151 Frankfort, KY 40601 502-699-2681
866-294-6103
866-294-6103
MAC Trailer Enterprises Inc. announced that the MAC Liquid Tank Trailer (MAC LTT) brand is now formally aligned under MAC Trailer. This rebrand unifies all operations across all facilities and product lines. This transition applies to liquid manufacturing locations, including Ohio, Michigan and Montana.
The merger was established in late 2025, with rebranding efforts beginning in January 2026. As part of this alignment, the standalone MAC LTT brand will gradually be phased out, with products, people and facilities continuing forward under the MAC Trailer name.
“MAC LTT changed the liquid tank trailer industry, and we are excited to continue the legacy of innovation as we grow together,” said Bill McKenzie, president of sales of MAC Trailer Enterprises Inc. “This alignment allows us to better serve our customers by bringing additional resources, expanded support and a more unified approach to the market.”
MAC Trailer is expanding its product offerings to the liquid hauling industry, including refined fuels, chemicals, food grade products and more.
“This is a positive step for customers,” said Matt Niemeier, director of liquid tank trailer products. “By aligning under MAC Trailer, we are creating a stronger platform to support long term product quality, consistency and service across the liquid tank market.”
MAC Trailer Enterprises, Inc. is a manufacturer of dump, flatbed, transfer, pneumatic tank trailers, dump truck bodies and liquid tank trailers.
Founded in 1994, the company serves customers across North America with a focus on quality, durability and customer support.
For more information, visit mactrailer.com.
Red Granite Equipment, dedicated to the commercial vehicle industry by providing truck equipment, trailer and work-ready truck solutions, announced Jan. 15, 2026, that it has commenced operations across the state of Wisconsin and beyond.
Staffed by proven professionals with decades of hands-on experience in the commercial truck and equipment space, Red Granite Equipment offers sales, parts and service support for purpose-built solutions from leading manufacturers including Palfinger, Cross Country Manufacturing, Kesla, Serco, Western Products, CM Truck Beds and Industrial Truck Beds, among other industry leaders.
Through strategic alliances with partners like Kriete Truck Centers, Red Granite Equipment also provides specialized Cross Country and Great Lakes trailers, as well as work-ready trucks serving construction, logging and many other industry niches — featuring a variety of Class 3-8 truck manufacturers, including Mack Trucks.
“We are devoted to bringing our team’s expertise and genuine commitment to service to all customers in
(L-R) are Allen Cash, sales associate; Garrett Schaefer, director- equipment sales and operations; and Chris Roth, sales associate.
Wisconsin and across the U.S.,” said Garrett Schaefer, director of Red Granite Equipment. “We’re confident that the best-in-class equipment, trailer and work-ready truck solutions we provide will drive customers’ businesses forward. Our success will be measured by our customers’ success.”
Serving Wisconsin and beyond, Red Granite Equipment offers a one-stopshop for commercial vehicle upfitting, equipment and trailer sales, high-qual-
www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000
600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400
65809 Gratiot Avenue Lenox, MI 48050 586-727-7502
4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090
8300 M-72 East Williamsburg, MI 49690 231-267-5060
56555 Pontiac Trail New Hudson, MI 48165 248-437-8121
www.brookstractor.com
1900 West Main Street Sun Prairie, WI 53590 608-837-5141
12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790
1031 Lawrence Dr. De Pere, WI 54115 920-336-5711
5429 Prairie Dr. Plover, WI 54467 715- 254-2777
1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700
455 West Ave. North West Salem, WI 54669 608-786-2644
2900 Bicycle Street Sparta, WI 54656 608-351-2101
rmsequipment.com
5633 Highway 13 W Savage, MN 55378 952-895-9595
101 Country Club Rd, SE Byron, MN 55920 507-701-0199
314 Garfield Avenue Duluth, MN 55802 218-727-8611
315 Hoover Road N Virginia, MN 55792 218-741-9011
3001 Oxbow Ct SW Bondurant, IA 50035 515-282-0404
10740 High Life Court SW Cedar Rapids, IA 52404 319-363-9655
1400 North Highway 75 Sioux City, IA 51105 712-252-0538
3150 5th Avenue East Moline, IL 61244 309-755-7203
75 US Hwy 41 East Negaunee, MI 49866 906-475-6488
www.lanoequip.com 6140 Highway 10 NW Anoka, MN 55303 763-323-1720
23580 Highway 55 Loretto, MN 55357 763-479-8200
3021 West 133rd Street Shakopee, MN 55379 952-445-6310
ity and industry specific parts and accessories and service and maintenance support for industry-leading equipment, trailers and bodies.
Through strategic alliances, Red Granite Equipment also provides specialized trailers and work-ready trucks for construction, tree service, utility, municipal, landscape and numerous other industries.
For more information, visit redgraniteequipment.com.
www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107
WOC from page 26
professional
Brokk, a leader in remote control demolition equipment since it began in 1976, uses unmatched power-to-weight ratios and a wide array of attachments.
Angela Sharp, owner of SharpGrade Attachments of Bellefontaine, Ohio, poses in front of the GF110, which is a 110-in. fixed-frame, nonretracting grader blade designed for 65–90 hp skid steers and compact track loaders.
Tyler Britain, sales specialist of Agrilands BringFuel of Winterset,
how BringFuel provides specialized onsite fuel storage solutions.
2114 Highway 1428 East Prestonsburg, KY 41653 606-874-2104
1 Avenue A Leetsdale, PA 15056 412-741-1731 6345 Clearfield-Woodland Hwy Clearfield, PA 16830 814-765-8500
4679 New Baumgartner Rd St. Louis, MO 63129 314-487-8925
of the river bottom is performed by the long reach excavators on barges, and a boat with bathymetric survey equipment is used to map the bottom of the river and make sure everything was properly demolished and removed.
As for traffic prior to the detonation, the streets were closed to make sure all cars were out of the restricted zone.
“No parking ordinances were enforced along these streets,” said Burke. “The state highways remained open until just before the detonation and reopened after the ‘all clear’ was given. The streets under the exist-
ing bridge and next to the railroad tracks stayed closed until the remaining Iowa span of the steel truss was inspected and the tracks were cleared for trains.”
Removal of the truss from the river means Kraemer can then work on installing temporary shoring towers for the Wisconsin span of the new bridge. The shoring towers allow Kraemer to continue erecting the new truss on both the Iowa and Wisconsin sides of the river.
According to Iowa DOT, the 1,700-ft. cantilever bridge has served the area since 1931, with a closure from 1945 to 1957 when it was damaged by ice dams.
Depreciation over time and changing vehicle size and traffic patterns require a wider, safer crossing.
The $3 million demolition of the old bridge is considered a critical step in moving forward with the replacement structure, which is expected to open in 2027. Burke said he’s glad this major hurdle has been cleared.
“It’s a huge relief. Even with the best plan, many things can still go wrong. I’m just glad the truss fell the way it was planned to and, most importantly, everyone went home safe.” CEG
ly changes during the building process, saving both time and money,” said the company. “Site consultations also provide an opportunity to identify environmental and regulatory considerations that may affect the project.”
These considerations might include local zoning requirements, floodplain restrictions or protected vegetation, according to the article.
Addressing these factors early can streamline permitting processes and reduce the risk of future legal or regulatory complications, the company said.
“By incorporating expert recommendations from the consultation, project teams can establish a more efficient workflow.”
These teams also have the advantage of anticipating challenges that might otherwise delay construction, believes Survey Systems.
“Additionally, site consultations contribute to better communication among stakeholders,” it said. “Property owners, architects, engineers and contractors can review the findings together, creating a shared understanding of the site’s opportunities and limitations.”
This collaborative approach, it said, helps align expectations, ensuring that everyone involved in the project is on the same page before construction begins.
The impact of site evaluations on project budgeting also is critical. With early evaluation, professionals can accurately predict costs for various phases of the job.
“By understanding the site’s specific needs, property owners can plan more effectively, reducing the likelihood of
The right consultant is crucial to obtain accurate and actionable insights, said Survey Systems.
“Their expertise ensures that every important detail is considered … so that the recommendations provided are practical, reliable and aligned” with best industry practices.
“When choosing a professional for a site consultation, it’s important to consider their experience and track record with projects like yours,” said the company.
“Professionals who have worked on similar builds are better equipped to anticipate challenges, suggest effective solutions and provide insights” that save time and money.
Referrals from trusted contractors, architects or peers can help identify experts who are thorough, attentive to detail and able to clearly communicate findings.
“The depth and quality of a site consultation can vary depending on the professional’s approach,” said Survey Systems.
unexpected expenses,” said Survey Systems.
Site consultations help prioritize expenditures by distinguishing areas that require immediate attention from those that can be addressed later.
According to the company, these evaluations enable property owners to allocate resources efficiently.
“This approach reduces waste, enhances financial control and supports a smoother construction process overall,” said the survey company.
Some may offer a general walkthrough, providing observations and recommendations at a high level. Others provide a detailed evaluation that includes topographical maps, soil analysis and other technical assessments.
“Engaging a professional who conducts a thorough and well-documented site consultation allows potential issues to be identified and addressed early.”
Accomplishing that early can streamline the construction process and maximize efficiency, according to the article.
“The time and effort invested in these evaluations provide significant long-term value,” it said. CEG
List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.constructionequipmentguide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted
WANTED: LARGE PORTABLE OR STATIONARY GENERATORS IN ANY CONDITION. ALL MODELS: CAT, CUMMINS, DETROIT, MTU, PERKINS, VOLVO (DIESEL OR NATURAL GAS). CAN REMOVE IF NEEDED.
EMAIL: MICHSURPLUS@GMAIL.COM; PHONE: 201-587-6300
WANTED: VOLVO L70G WHEEL LOADERS. GOOD VOLVO L70G WHEEL LOADER, L70F, L70E. EMAIL: FRANK.HORAN@ HOFFMANEQUIP.COM; PHONE: 732-674-2095
WANTED: CATERPILLAR 988K
STRAIGHT EDGE GP FINISH PRODUCT BUCKET.
EMAIL: DUBOISLIVESTOCK@GMAIL.COM; PHONE: (207)-282-4445
WANTED: JOHN DEERE 850J LGP CRAWLER DOZERS. WANT TO BUY BULLDOZER 850JLGP SIX WAY ENC CAB WITH WINCH 2005 AT 2012 REAL HOURS UNDER 900. THANKS, YOU HAVE MY EMAIL FOR PICTURE. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA
WANTED: PART FOR CATERPILLAR CRAWLER DOZER - 943 CAT SPRING FOR TRACK ADJUSTER PART# 7P1675, SERIAL # 19Z00380. PETE 631-774-1905 EMAIL: LIEARTH3@AOL.COM; PHONE: PETE @ 631-774-1905.
WANTED (WORLDWIDE): LIEBHERR WHEEL LOADER.
EMAIL: MABAT_560@YAHOO.CO.UK
WANTED (WA): CATERPILLAR BACKHOE LOADERS+. LOOKING TO BUY USED EQUIPMENT IN THE FOLLOWING CATEGORIES: KOMATSU LOADERS WA200, WA270 WITH QUICK COUPLERS, LOW HOURS, GOOD PRICE; KOMATSU EXCAVATORS 138-8+ AND CAT 320 CL/DL/EL (ANY HOURS, ANY CONDITION; CAT GRADERS 140G/140H (1990 OR NEWER); CAT BACKHOES C/D/E/F SERIES; CASE BACKHOES - JD 310G – SG; OTHER CAT LOADERS, GRADERS, AND EXCAVATORS.
PLEASE PROVIDE YEAR, HOURS, CONDITION, LOCATION, AND PRICE.
EMAIL: JAN@GOLDENHORSEMACHINERY.COM; PHONE: 425-217-6188.
WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. WANT TO BUY KOMATSU BULLDOZER 475A-5 OR 475A-8 WITH BIG BLADE TO PUSH WOOD. UNDER 6000 HOURS, REAL HOURS METER AND FRAME.
EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 450-346-8975
WANTED (US): BOMAG PADFOOT COMPACTORS, ALL MODELS. LOOKING TO BUY FOR AN EROPS 84'' PADFOOT COMPACTOR (ANY MAJOR BRAND). EMAIL: EQUIPMENTDESTINY@GMAIL.COM
WANTED (WORLDWIDE): WESTERN RETEK CRUSHERS, ALL MODELS; LOOKING FOR ANY SPARE PARTS FOR A 2006 WESTERN RETEK IMPACT CRUSHER 1310I. EMAIL: WARRUMCONSTRUCTION@ICLOUD.COM PHONE: 317-71-07390
WANTED (CA); BUSH HOG PLOWS, ALL MODELS. NEED PLOWS- PREFER BRUSH HOG. WILL PAY TOP DOLLAR WHOLE OR PARTS.
EMAIL: TOMTOMGOFORIT@YAHOO.COM
WANTED (WA): CATERPILLAR WHEEL LOADERS, MODELS FROM 908 TO 980. EMAIL: JOHNLEWISDAN1@GMAIL.COM PHONE: (425) 217-6188
WANTED (TX): HITACHI EX270-1 EXCAVATORS. LOOKING TO PURCHASE THE FOLLOWING EQUIPMENT (BOTH RUNNING & NON-RUNNING): WHEEL LOADERS (CATERPILLAR): 950B|950E|966E|966F; GROVE CRANES: RT880E|RT8890E; EXCAVATORS (HITACHI): EX200LC|EX270LC|EX300LC|EX/ZX330L C|EX370LC|EX400LC|EX450LC-5; WHEELED EXCAVATORS (JOHN DEERE): 495D|595D; MOTOR GRADERS (CATERPILLAR): 12G|130G|140G|140H; BACKHOES: CATERPILLAR|CASE; PAVERS (VOGELE).
EMAIL: EKTRADINGLLCOMPANY@GMAIL.COM; PHONE: 346-469-2517
WANTED (CA): HITACHI ZAXIS450LC EXCAVATORS. LOOKING FOR HITACHI ZX460LC, ZX470LC, ZX800LC, KOMATSU PC490LC-1. EMAIL: VIETUSAEXPORT@GMAIL.COM; PHONE: 951-777-9999
WANTED (WA): CATERPILLAR BACKHOE LOADERS, ALL MODELS. EMAIL: JOHNLEWISDAN1@GMAIL.COM PHONE: (425) 217-6188.
WANTED (US): INSLEY EXCAVATORS, ALL MODELS. LOOKING FOR LAGGING AND CABLE DRUMS FOR A W B INSLEY 1967.
EMAIL: JCTHEDANCEMAN@GMAIL.COM; PHONE: 231-872-9117
WANTED (WORLDWIDE): CATERPILLAR 140K MOTOR GRADER.
EMAIL: MBUSIINGE@YAHOO.COM; PHONE: 077-791-2153
WANTED (OH): CASE 580SM2 BACKHOE LOADERS. EMAIL:JERRY@VIOXEXCAVATING.COM ; PHONE: 513-460-3315
WANTED (WORLDWIDE): VERMEER RTX 750 / RTX8550 EQUIPPED WITH A LARGE CUTTING WHEEL. EMAIL: RENATO.NASCIMENTO@ELEBBRE.COM PHONE: +55 11 994602266
Manitowoc 888, SN: 8881038, 230 ton crawler crane, Series 2 Counterweights, LSI/LMI system w wireless load links, Self-Erect option, Luffing jib & Aux drum Prepped, AC & Heated Cab,
WANTED (US): CATERPILLAR 140G MOTOR GRADERS, LOOKING TO PURCHASE A RANGE OF HEAVY CONSTRUCTION EQUIPMENT AND WOULD APPRECIATE RECEIVING YOUR BEST OFFERS FOR THE FOLLOWING MODELS, RUNNING OR NON-RUNNING: CAT WHEEL LOADERS: 950B 950E 966E 966F HITACHI EXCAVATORS: EX200LC EX270LC EX300LC EX330LC EX400LC EX450LC-5 JOHN DEERE WHEELED EXCAVATORS: 495D 595D CAT MOTOR GRADER: 140G CAT AND CASE BACKHOES VÖGELE PAVERS: S1800 S1900 CEDARAPIDS ROLLERS/PAVERS.
EMAIL: ILYAS.MTCPK@GMAIL.COM PHONE: 0923322489350
WANTED (US): JOHN DEERE 850K SMARTGRADE CRAWLER DOZERS, BULLDOZER 850KLGP JOHN DEERE SMART GRADE «3D« ENC CAB WITH WINCH 36 INCHES SIX WAY UNDER 1200 HOURS REAL HOURS METER AND FRAME NO JUNK NO WEB MUST BE USER«CONTRACTOR« OR PAYMENT OUT« OR SUCCESSION.
EMAIL:
JEANMAURICEBOUTIN@VIDEOTRON.C A PHONE: 450-346-8975
WANTED (WA): CATERPILLAR EXCAVATORS, MODELS 320C, 320D, AND 320E.
EMAIL: JAN@GOLDENHORSEMACHINERY.CO MPHONE: 425-217-6188
WANTED (US): CATERPILLAR D8K CRAWLER DOZERS.
TRYING TO LOCATE D8K DOZER WITH SPACER PLATE ENGINE, RIPPER AND PUSH BLADE.
EMAIL: IUKANDCO@GMAIL.COM
WANTED (US): CATERPILLAR TH62 TELEHANDLER. LOOKING FOR A BROKEN, NON-RUNNING CATERPILLAR TH62 TELEHANDLER. I HAVE ONE AND WOULD LIKE TO BUY ONE FOR PARTS.
EMAIL: CRAIGBERENS944@GMAIL.COM
PHONE: (6I6) 8I3-3642
WANTED (KS): VERMEER TRACK TRENCHER.
EMAIL:
STATELINEDIG@DIODECOM.NET PHONE: 402-806-0073
WANTED (US): KOMATSU D475A-5, CRAWLER DOZER. NEED BULLDOZER 475A 5 WITH RIPPER OR SS RIPPER 2016 AND UP.
EMAIL:
JEANMAURICEBOUTIN@VIDEOTRON.CA
PHONE: 1-450-346-8975
WANTED (US): CASE BACKHOE LOADERS, 580 SUPER M AND SUPER L MODELS.
EMAIL:
FRANKHORAN@GTMIDATLANTIC.COM
PHONE: 1-800-654-USED
WANTED (VT): CASE 650L LGP CRAWLER DOZER. ENC. CAB, UNDER 900 HOURS, 27.5 INCH PADS.
EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA
PHONE: 450-346-8975
New Holland C238, S/N: NKM474234, 3220 Hours, 84” Bucket, High Flow Hydraulics, Hyd. Quick Coupler $38,000 Contact Skip Henson 219-696-5680 • shenson@ronsonequipment.com
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number.
• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $140 per ad, $65 additional for color.
• Your ad will run for two consecutive issues in 1 region.
ALEX LYON & SON
AUCTIONEERS
www.lyonauction.com
315-633-2944
• Bushnell, FL
Jan. 29 – Feb. 9, 2026
For: 33rd Annual Florida Auction
• Online (NY)
Feb. 20 – March 6, 2026
For: Retirement Auction of Successful Marine Contractor
RITCHIE BROS.
AUCTIONEERS
www.rbauction.com
402-421-3631
• Northeast Regional Event
February 4 - 5, 2026
• Midwest Regional Event February 10-11, 2026
• Texas Regional Event February 11 - 12, 2026
• California Regional Event February 12 - 13, 2026
• Orlando, FL February 16 – 20, 2026
ABSOLUTE AUCTION & REALTY, INC.
www.AARauctions.com
800-243-0061
• Online
Ends February 5, 2026
For: Peekskill, NY Vehicle & Equipment Auction
• Online
Ends February 9, 2026
For: Village of Hasting-on-Hudson Surplus Vehicle Auction
• Online
Ends February 10, 2026
For: Great Neck UFSD Surplus0 Auction
AIR WORKS CONSIGNMENT
AUCTION LTD.
www.airworksauction.com
330-749-4362
• Millersburg, OH
February 19 - 21, 2026
For: 38th Annual Consignment Auction
AUCTIONS INTERNATIONAL
www.auctionsinternational.com
800-536-1401
To view our complete list of upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
• Online Jan. 19 – Feb. 6, 2026
For: Online Auctions Closing Daily!
BAR NONE AUCTION
www.barnoneauction.com
866-372-1700
• Online
Fri., February 6, 2026
For: Fontana, CA
Monthly Public Auction
• Online Sat., February 14, 2026
For: Sacramento, CA
Monthly Public Auction
• Online Fri., February 27, 2026
For: Woodburn, OR Monthly Public Auction
BIDADOO AUCTIONS
www.bidadoo.com
1-877-BIDADOO
• Online
February 3, 2026
• Online February 10, 2026
BIG IRON AUCTIONS
www.bigiron.com
800-937-3558
• Online February 4, 2026
• Online February 11, 2026
BLACK STAR ACA
www.blackstaraca.com
800-610-2192
• Online
Thurs., February 12, 2026
For: Internet Retirement Auction
• Online Wed., February 25, 2026
For: Timed Auction
BRYAN AUCTION CO.
www.bryanauction.com
319-283-2345
• Kissimmee, FL
Fri., February 13, 2026 For: 4th Annual Independent Equipment Dealers Assoc. Equipment & Transportation Sale
DEMOTT AUCTION COMPANY
www.demottauction.com
229-985-4565
• Vienna, GA
Thurs., February 5, 2026
For: 2nd Annual Fullington Academy Benefit Auction
• Okeechobee, FL
Thurs., February 19, 2026
For: 20th Annual “Cane County” Auction
DON SMOCK AUCTION CO., INC.
www.dsa-auctions.com
765-778-9277
• Online
Wed., February 4, 2026
For: Annual Winter Online Auction
• Detroit, MI
Mon., February 26, 2026 For: Absolute Equipment Auction
FREIJE & FREIJE AUCTIONEERS
www.freijeauctioneers.com
317-539-2895
• Clayton, IN
Thurs., February 5, 2026
For: Winter Midwest Construction & Ag Equipment Auction
• Clayton, IN
Thurs., February 5, 2026
For: Midwest Public Automobile Auction
HANSEN AUCTION GROUP www.hansenauctiongroup.com 920-383-1012
• Online Only
Ends February 24, 2026
For: Monthly Construction, Heavy Truck & Government Auction Various Locations
HUNYADY AUCTION COMPANY www.hunyady.com
800-233-6898
• Online
Wed., February 4, 2026
For: Virtual Live-Broadcast & Timed Auction Hopwood Enterprises
I.R.A.Y. AUCTION www.iraymn.com 320-968-7230
• Online
Wed., February 18, 2026
For: Heavy Equipment, Truck & Trailer Auction
J. STOUT AUCTIONS www.jstoutauction.com 888-897-8864
• Online
Wed., February 25, 2026 For: Live Streaming Auction
• Online Thurs., February 26, 2026 For: Timed Online Only Auction
JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246
• Online February 5 - 12, 2026 For: Marysville Heavy Equipment, Contractors Equipment & Vehicles
JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200
• Kissimmee, FL February 9 - 12, 2026
For: Annual Winter Construction Equipment & Transportation Auction
PURPLE WAVE AUCTION www.purplewave.com 866-608-9283
• Online
Tues., February 3, 2026
For: Government Auction
• Online
Wed., February 4, 2026
For: Ag Equipment Auction
• Online Thurs., February 5, 2026
For: Truck & Trailer Auction
• Online
Wed., February 11, 2026 For: Vehicles & Equipment Auction
• Online Thurs., February 12, 2026
For: Construction Equipment Auction
• Online
Tues., February 17, 2026
For: Government Auction
RTi AUCTIONS www.rtiauctions.com
585-243-1563
• Online
February 3 - 10, 2026
For: February NetAuction Edition 1
SHERIDAN REALTY & AUCTION COMPANY www.sheridanauctionservice.com 517-676-9800
• Online Only
Ends February 3, 2026
For: J&J Hardwoods & Lawn Sprinklers of Lansing Retirement Auction
• Online Only
Ends February 24, 2026
For: Hull Brothers Inventory Reduction Auction
YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990
• Kissimmee, FL
February 11 – 14, 2026
For: The Original Florida Auction
• Findlay, OH
February 26 - 27, 2026
For: Heavy Equipment Auction
To
ASSOCIATED GENERAL CONTRACTORS (AGC)
AGC Events Calendar:
All AGC Web-Eds are scheduled in Eastern Standard Time (EST). Conferences are scheduled using the local time zone where the event takes place.
• AGC EDGE Introduction to MS Project
Date: Wednesday, Feb 18, 2026
Time: 11:00 AM – 3:00 PM
Online, Virtual
Training/Professional Development For more information:
• AGC EDGE Leadership and Motivation (STP Unit 1)
Start Date: Mon. March 2, 2026 (4:00 PM)
End Date: Tuesday, March 10, 2026 (8:30 PM)
Online, Virtual
Training/Professional Development
AGC Phone Number: 703/548-3118
AGC Fax Number: 703/842-8817
• AGC Safety & Health Quarterly Town Hall
Date: Wednesday, March 4, 2026
Time: 2:00 PM – 3:00 PM
Virtual Safety and Health
• AGC EDGE Planning and Scheduling (STP Unit 3)
Start Date: Thursday, March 5, 2026 (10:00 AM)
End Date: Thursday, March 19, 2026 (3:30 PM)
Online, Virtual
Training/Professional Development
• AGC EDGE Estimate with Impact – Heavy Highway
Civil Estimating
Start Date: Wednesday, March 11, 2026 (1:00 PM)
End Date: Friday, March 20, 2026 (5:00 PM)
Online, Virtual
Training/Professional Development
• AGC EDGE Project Manager Development Program
Start Date: Monday, March 16, 2026 (12:30 PM)
End Date: Tuesday, March 31, 2026 (7:00 PM)
Online, Virtual
Training/Professional Development
• AGC EDGE Diving into MS Project
Date: Wednesday, March 18, 2026
Time: 11:30 AM – 3:00 PM
Online, Virtual Training/Professional Development
NATIONAL FARM MACHINERY SHOW
Dates: February 11 – 14, 2026
Place: Kentucky Exposition Center 937 Phillips Lane, Louisville, KY 40209
Phone: 502/367-5000
The National Farm Machinery Show offers the most complete selection of cutting-edge agricultural products, and equipment and service available in the farming industry. Business professionals from around the world gain knowledge and hands-on access to various technological advancements needed for the upcoming farming session during the four-day show.
The Future of Agriculture
The National Farm Machinery Show presents an extensive range of cutting-edge agricultural products, equipment and services, making it the go-to-event for business professionals worldwide.
For more information about the Event:
Farm Credit Mid-America Headquarters Phone: 502/420-3700
MINEXCHANGE 2026 SME ANNUAL CONFERENCE & EXPO
Start Date/Time: February 22, 2026 (6:00 AM) (MT)
End Date/Time: February 25, 2026 (6:00 PM) (MT)
Place: Salt Palace Convention Center
100 S. W. Temple Street Salt Lake City, UT 84101
The Society for Mining, Metallurgy & Exploration (SME) brings together the mining and mineral industry’s brightest and most dedicated professionals.
Our members are focused on sharing best practices for safety, environmental stewardship and moving mining forward.
SME. Inspiring Mining Professionals Worldwide.
From February 22 – 25, 2026, the Society for Mining, Metallurgy & Exploration (SME), will host the mining industry’s premier annual conference, the MINEXCHANGE 2026 SME Annual Conference & Expo.
The Event will bring together thousands of professionals, students and exhibitors for over 100 technical sessions covering all aspects of the industry, countless networking opportunities, an Expo Hall featuring 590 unique exhibitors, student competitions and poster contests, a must-see awards ceremony, and much more.
At MINEXCHANGE you are surrounded by people as excited and passionate about the mining industry as you.
Join leaders from around the industry where you will learn the latest on today’s critical topics from innovation to responsible mining.
For more information and to Register for the MINEXCHANGE 2026 SME Annual Conference & Expo:
Phone: 720/738-4085
Email: cs@smenet.org
SPECIALIZED CARRIERS & RIGGING ASSOCIATON (SCRA)
SC&RA SPECIALIZED TRANSPORTATION SYMPOSIUM 2026
Dates: February 24 – 26, 2026
Place: Sheraton Birmingham Hotel 2101 Richard Arrington Jr. Blvd. N. Birmingham, AL 35203
Phone: 205/324-5000
The SC&RA is an International Trade Association of more than 1,400 members from 46 nations. Our members are involved in specialized transportation, machinery moving and erecting, industrial maintenance, millwrighting and crane and rigging operations, manufacturing and rental. Our Mission
Our Mission is Simple.
We advocate, educate and provide networking opportunities that help industry stakeholders operate safely, legally and profitably around the world.
We also help our members run more efficient and safer businesses by monitoring and affecting pending legislation and regulatory policies at the state and national levels.
We do this by researching and reporting on safety concerns and best business practices, and by providing four (4) yearly forums where these and other relevant member issues can be discussed and advanced.
For more information on SC&RA Specialized Transportation Symposium 2026: SC&RA
5870 Trinity Parkway, Suite 200
Centreville, VA 20120
Phone: 703/698-0291
Email: info@scranet.org
Purple Wave Auction is exhibiting at ConExpoCon/AGG, underscoring its commitment to customer service and offering in-person guidance for equipment buyers and sellers nationwide. Visit Booth N-12002 where Purple Wave Auction's industry experts will be available to provide full-service support for buying and selling equipment.
Purple Wave is a leader in online, noreserve equipment auctions serving the construction, agriculture, government and fleet industries, providing customers with opportunities to buy and sell equipment with confidence, according to Purple Wave.
In 2025, Purple Wave conducted 141 biweekly auctions. The opportunity to buy or sell is always at your fingertips with the ability to bid 24/7, and expert sales team members available to make the selling journey easy.
• Equipment sells to the highest bidder at auction close.
• Payments sent to sellers (checks sent within 15 business days of auction close).
Selling your equipment with Purple Wave is easy and only takes seven simple steps:
• Consult with a territory sales manager.
• Agreement to sell with Purple Wave.
• Purple Wave comes to you and handles all pre-auction photos and listings.
• Your equipment is marketed nationwide.
• Bidding starts as soon as your equipment is posted
Attendees can meet directly with Purple Wave's team to receive expert guidance tailored to their needs and learn how the company supports sellers through a straightforward, online auction experience. In addition to hands-on support, Purple Wave Auction will provide insight into current equipment market trends, including historical pricing data and demand indicators to help sellers make more informed decisions. The company also will highlight its Purple Wave shipping and appraisal services, offering customers a comprehensive, full-service solution that supports equipment from evaluation through sale and delivery.
ConExpo-Con/AGG attendees are encouraged to schedule meetings in advance, to ensure dedicated time with our team members.
Meetings can be scheduled in advance at purplewave.com/event/conexpo.
