CATALOGO POLSINELLI 2025 EN - OLIO

Olive Oil

Foliage removers

Foliage remover OLITA

The Olita olive leaf remover is a machine entirely made by Polsinelli, designed to speed up the selection of olives from leaves and twigs. Equipped with an electronic speed variator ranging from 0 to 2850 RPM, the device allows any type of olive to be cleaned by simply turning the knob. Thanks to its forced ventilation system, the Olita leaf remover without a grid is also suitable for processing beans, chickpeas, and broad beans.

The grid for the Olita leaf remover is an accessory that optimizes selection after olive harvesting. It is designed to retain branches and leaves while ensuring that only the olives fall into the chute below.

Foliage removers

Foliage remover OLITA

X

The Olita X olive leaf remover is a machine entirely made of AISI 304 stainless steel by Polsinelli, designed to speed up the selection of olives from leaves and twigs. Equipped with an electronic speed variator ranging from 0 to 2850 RPM, the device allows any type of olive to be cleaned by simply turning the knob. Thanks to its forced ventilation system, the Olita leaf remover without a grid is also suitable for processing beans, chickpeas, and broad beans.

The grid for the Olita X leaf remover is an accessory that optimizes selection after olive harvesting. It is designed to retain branches and leaves while ensuring that only the olives fall into the chute below.

Easy movement thanks to the wheels supplied

Foliage removers

Foliage-remover OLÌ

The Olì olive leaf remover is a support tool for small producers who need to separate olives from leaves and twigs after harvesting. The device consists of an upper grid and a lower chute grid, both manufactured using laser cutting technology.

The space between the slits was calculated to allow the passage of leaves, but not olives.

Pour the harvested olives onto the upper grid, stirring them by hand to separate the leaves and attached twigs. During this process, the olives will fall onto the lower section and quickly slide along the chute grid, where they can be collected in a container.

SKU

AOP0192

AOP0193

AOP0190

AOP0191

AOP0188

AOP0189

AOP0196

AOP0155

AOP0120

AOP0122

AOP0169

AOP0171

AOP0170

AOP0172

AOP0079

Duetto Aima with fixed carbon rod

Duetto Aima with telescopic carbon rod

Jaguar Aima with fixed carbon rod

Jaguar Aima with telescopic carbon rod

Twigo 2.0 Aima with fixed aluminium rod

Twigo 2.0 Aima with telescopic aluminium rod (ERGAL)

Viper Aima with fixed aluminium rod (ERGAL)

Oliviero Flex-BTM

Oliviero Flex-PTM

Oliviero Light 3.0

Pellenc Olivion Duo with fixed rod

Pellenc Olivion Duo with telescopic rod

Pellenc Olivion Solo with fixed rod

Pellenc Olivion Solo with telescopic rod

Plastic olive rake

SKU

COR0058

AOR0102

AOR0098

AOR0007

AOR0075

AOR0097

AOR0103

AOR0006

AOR0106

AOR0101

AOR0104

AOR0099

AOR0100

AOR0105

Products for the olive harvest

Olive Electric Shaker

Accessories for Olive Electric Shaker

12V/44V Pellenc battery converter for Olivion electric shaker

36V 15A battery kit for Duetto, Jaguar and Viper shakers

Duetto and Jaguar carbon rod

Carbon rod for model Oliviero Evolution - Light 2.0

Carbon rod for Oliviero Light

Twigo carbon rod

Viper carbon rod

Composite wand for Oliviero Flex shaker

Replacement left holder 5 attachments for Duetto

Replacement right holder 5 attachments for Duetto

Replacement right holder 4 attachments for Viper

Replacement 4-attachment stand for Jaguar olive harvester rods

Replacement 5-attachment stand for Twigo olive harvester rods

Viper 4 replacement left-side holder

Net for the olive harvest

Rectangular Net

Measurements

AOP0094 AOP0159

Weight: gr. 90/mq

Mesh type: Anti-thorn Shape: Rectangular with fastening eyelets at the corners

Squared Net with opening

Measurements in metres

Weight: gr. 90/mq

Mesh type: Anti-thorn

Shape: Square with a slit and fastening eyelets at the corners

Rolls Net

Measurements in metres

AOP0095

AOP0096

AOP0097

AOP0160

AOP0147

AOP0163

AOP0100

AOP0101 AOP0103

Crates

AOP0012

AOP0014

AOP0016

Entirely open Grapes/Olive crate

Entirely closed crate for grapes

Weight: gr. 90/mq

Model: “Pugliese”

Shape: Roll

Mesh type: Anti-thorn

Crate for grapes with closed bottom

Dimensions(cm): 35,5x54x32 h

40 L

Mills designed for extracting high-quality extra virgin olive oil are the ideal solution for businesses and small producers. These machines are robust and highly specialized, offering high performance while producing premium-quality oil by cold processing olives independently, immediately after harvesting.

Drum with Grafted Bottom

The stainless steel drum with a crimped bottom is designed as a solution for hobbyists and professionals seeking a high-quality product for storing all types of food-grade liquids, from oil to milk.

Welded bottom drum

The stainless steel drum with welded bottom is a professional product featuring a welded smooth bottom for easy cleaning and a plastic protective base. Manufactured with high-quality materials, it provides optimal support for enthusiasts and businesses in bottling and storage operations.

Europa Drums

Food-grade drum manufactured according to strict standards and compliant with the highest quality regulations, ideal for storing oil and food-grade liquids. The use of stainless steel ensures long-lasting durability and perfect efficiency while preventing the release of any substances that could alter the content.

SKU Description

FIR0008

FIR0009

FIR0012

FIR0005

FIR0006

FIR0020

FIR0021

FIR0001

FIR0022

RIP0023

RIP0021

RIP0025

RIP0018

RIP0016

SIP0231

SIP0236

SIP0232

Gasket for drum lid Ø 110

Gasket for drum lid Ø 130

Gasket for drum lid Ø 230

Gasket for drum lid Ø 140

Gasket for drum lid Ø 210

Screw lid Ø 210

Screw lid Ø 130

Screw lid Ø 200

Screw lid Ø 230

Stainless steel screw tap 3/8”

Stainless steel screw tap 1/2”

Stainless steel tap 1/2”

Stainless steel lever tap 3/8”

Stainless steel lever tap 1/2”

Stainlees steel pedestal Ø 310

Stainlees steel pedestal Ø 370

Stainlees steel pedestal Ø 455

ACP0102

ACP0104

ACP0105

ACP0106

AOP0068

AOP0066

AOP0069

AOP0067

AOP0053

AOP0052

AOP0024

AOP0023

Use

Accessories for drums

Europa 2-3 L

Europa 5-10-15-20 L

Europa 25-30-50-75-100 L

Grafted 5 L

Smooth and grafted from 10 to 100 L

Europa 2-3 L

Europa 5-10-15-20 L

Smooth and grafted from 10 to 100 L

Europa 25-30-50-75-100 L

Europa from 2 to 5 L

Europa from 10 to 100 L - Smooth and grafted

Europa from 10 to 100 L Smooth and grafted

Europa from 2 to 5 L

Europa from 10 to 100 L Smooth and grafted

Graffato 10-15-20-25 L

Smooth 30-50-75 L and Grafted 30-50 L

Smooth and grafted 100 L

Stainlees

Stainless steel funnel Ø 12 with filter

Stainless steel funnel Ø 18 with filter

Stainless steel funnel Ø 22 with filter

Stainless steel funnel Ø 27 with filter

Stainless steel measure 1 L

Stainless steel funnel-shaped measure 1 L

Stainless steel measure 2 L

Stainless steel funnel-shaped measure 2 L

Stainless steel measure 5 L

Stainless steel funnel-shaped measure 5 L

Stainless steel measure 10 L

Stainless steel funnel-shaped measure 10 L

Removable filter

Removable filter

Removable filter

Removable filter with spout and handle with funnel and handle with spout and handle with funnel and handle with spout and handle with funnel and handle. with spout and handle with funnel and handle

Stainless steel tanks for oil

The stainless steel tank for oil is a professional quality model designed to meet all the production needs of professionals in the oil production sector and designed to guarantee maximum levels of robustness. The 18/10 stainless steel (AISI 304) manufacturing ensures total respect for the organoleptic characteristics of the product contained and long-lasting solidity. The tank is characterized by a mirror-polished interior finish and an embossed-pattern finished exteriorr, and by a concave and welded bottom for easy cleaning. Complete with stainless steel dust cover with knob.

SIP0188

SIP0190

SIP0194

SIP0183

SIP0184

SIP0186

SIP0187

SIP0448

SIP0189

SIP0191

SIP0192

SIP0193

SIP0195

1/2" Chrome plated brass

1/2" Chrome plated brass

1/2" Chrome plated brass

1/2" Chrome plated brass

1/2" Chrome plated brass

1/2" Chrome plated brass

3/4" Stainless steel

3/4" Stainless steel

3/4" Stainless steel

3/4" Stainless steel

Ø 370 X 385h

Ø 370 X 495h

Ø 370 X 745h

Ø 455 X 680h

Ø 530 X 705h

Ø 530 X 980h

Ø 630 X 990h

Ø 630 X 1240h

Ø 710 X 1045h

Ø 780 X 1100h

Ø 780 X 1240h Ø 850 X 1240h

SIR0070

SIR0071

SIR0072

SIR0073

SIR0074

SIR0075

SIR0076

SIR0069

Stainless steel dust cover - Complete with knob

Dust cover thank 35/50/75 L

Dust cover thank 100 L

Dust cover thank 150/200 L

Dust cover thank 300 L

Dust cover thank 400 L

Dust cover thank 500 L

Dust cover thank 700 L

Dust cover thank 1000 L

SIP0231

SIP0236

SIP0232

SIP0233

SIP0234

SIP0235

SIP0237

SIP0238

SIP0239

Stainlees steel pedestal 25 L

Stainlees steel pedestal 35/50/75 L

Stainlees steel pedestal 100 L

Stainlees steel pedestal 150/200 L

Stainlees steel pedestal 300 L

Stainlees steel pedestal 400 L

Stainlees steel pedestal 500 L

Stainlees steel pedestal 700 L

Stainlees steel pedestal 1000 L

EPP0292

EPP0308

EPP0293

EPP0309

Stainlees steel pedestal

Oil Transfer Hose

Storage

10° conical bottom tanks

The AISI 304 stainless steel storage tank is ideal for containing food-grade liquids. Its mirror-polished interior facilitates cleaning and sanitization, while the embossed-pattern finished exterior adds durability and style. Designed as the perfect solution for hobbyists and professionals seeking high-quality equipment for production storage, it features: a 400 mm anti-retention upper hatch, a 10° conical bottom with reinforcements, partial and total drain outlets with a stainless steel valve and a 1’’ ENO 30 plastic elbow. The tank is equipped with: 3 stainless steel legs, a sample tap and a level indicator with stainless steel protection.

SIP0070

SIP0074

SIP0083

SIP0266

SIP0404

SIP0071

SIP0268

SIP0064

640 x 1400h

720 x 1650h

930 x 1900h

1150 x 2200h

1150 x 2800h

1400 X 2800h

1600 x 3200h

X 3900h

10° conical bottom tanks with nitrogen predisposition

The AISI 304 stainless steel storage tank with nitrogen setup is ideal for containing food-grade liquids, as the inert gas prevents oxidation and mold formation. Its mirror-polished interior facilitates cleaning and sanitization, while the embossed-pattern finished exterior ensures durability. Features include: a 400 mm anti-retention upper hatch with 4 additional clamps, a 1” stainless steel socket for nitrogen connection, a 10° conical bottom with reinforcements, partial and total drain outlets with a stainless steel valve and a 1’’ ENO 30 plastic elbow. The tank is equipped with: 3 stainless steel legs, a sample tap and a level indicator with stainless steel protection.

Socket for nitrogen connection

SIP0278

SIP0076

SIP0305

SIP0288

SIP0067

SIP0294

SIP0560

SIP0561

Nitrogen control panels

Nitrogen control panels are professional products designed to manage the volumetric compensation of storage tanks with nitrogen setups. These panels come equipped with a dual-action safety valve and a coil for connection to the nitrogen cylinder. Nitrogen is used because it is an inert gas that prevents oxidation and mold formation in food-grade liquids such as oil.

The control panel performs several essential functions: constant pressure monitoring inside the tanks; nitrogen regulation to compensate for pressure variations, keeping it within optimal levels; centralized and automated control, simplifying system management.

Safety: In the event of excessive pressure or vacuum variations, the safety valve automatically intervenes to provide proper compensation and prevent serious damage to the tanks, such as explosions or implosions.

PAD FILTERING MACHINE 20X20

Baby Inox for oil

The Baby 18 Inox olive oil filter includes a low-speed stainless steel electric pump ideal for the correct filtering of food liquids. The filter carries out the correct purification of olive oil that precedes the bottling phase.

Description

Baby 18 inox for oil

The continuous research dedicated to the “CKP Series,” used in all applications involving food-grade liquids and chemical-pharmaceutical solutions, has enabled structural modifications to enhance certain technical features of the sheets while maintaining their high-quality standards. The use of new premium-grade cellulose and significant improvements to the structure of the inlet side — always marked “CKP”— ensure higher performance. Meanwhile, the recognizable marking on the outlet side prevents fiber release and increases mechanical resistance during and after filtration.

V4 medium-clarifying 20x20

V8 clarifying 20x20

V4 medium-clarifying 40x40

V8 clarifying 40x40

Filter pads

Filtration

PAD FILTERING MACHINE 20X20

Jolly for oil

Specifically designed to meet the needs of small and medium-sized businesses, the Jolly series filters are made of stainless steel, offering practicality and safety. Depending on the type of filtering layers used, they allow for rough filtering and polishing of olive oil. The series includes machines with a filtering capacity of up to 300 liters of oil per hour. They are equipped with stainless steel electric pumps for filtering olive oil, requiring single-screw or nitrile impeller pumps.

Jolly 20 for oil

Jolly 30 for oil

Ricambi per filtro Jolly

Filtration

PAD FILTERING MACHINE 40X40

Eur for oil

The Eur plate filter for oil is used for filtering olive oil. It is designed to operate with 20 filtering sheets measuring 40x40 cm, offering various filtration characteristics. This allows you to achieve excellent levels of purification and clarification, with a working capacity of up to 350 liters per hour. The Eur 20 plate filter for oil is designed to preserve all organoleptic properties. Equipped with inlet and outlet adjustment valves and a sight glass, it enables precise control of the product flow. Additionally, it features air purge valves and allows for sampling of the processed product. The structure is made entirely of stainless steel, ensuring maximum durability and resistance over time, requiring no special maintenance beyond routine cleaning.

Electric pumps

Self-priming bisense electric pump

The Novax Oil electric pump is a tool designed for transferring oil, featured by bidirectional operation and self-priming capability. This model, equipped with a star-shaped impeller, is primarily intended for transporting oil at temperatures not exceeding 35°C. The Novax Oil electric pump performs excellently with neutral and clean products, containing less than 0.5% suspended particles. If necessary, a fine-mesh filter can be installed at the end of the suction hose.

Bidirectional switch

Electric pumps

Flexible Impeller

The flexible impeller electric pump is designed to help olive oil producers and wineries in the oil transfer process. This self-priming model automatically draws liquids and allows precise dosing of the transferred product thanks to its reversible rotation. Additionally, it enables the emptying of hoses once the work is completed.

220V

220V

380V - 50 HZ Thread and hose barb 3/4” GAS x PG20 1”1/4 GAS x PG30

GAROLLA 40 x PG40 1"1/2 x PG40

GAROLLA 40 x PG40

GAROLLA 60 X PG 60

GAROLLA 60 X PG 60

Electric pumps

Flexible impeller

Flexi self-priming electric pump in AISI 304 stainless steel with neoprene impeller. A professional tool capable of transferring food-grade liquids such as wine, oil, and beer at temperatures not exceeding 35°C. The pump can also be used in the agricultural, nautical, and gardening sectors, thanks to its ability to handle a partial presence of solid material during transfer.

Electric pumps

Stainless steel internal rotor

Electric pump with body and rotor in AISI 304 stainless steel, equipped with a cart and handle, the ideal solution to allow mobility in the cellar. Recommended for oenological applications, it is suitable for transferring wine, wine must, and food-grade liquids, even at high temperatures. The stainless steel rotor does not affect the organoleptic properties of the transported product, fully complying with the food-grade standards of D.M. 21/03/73. Models equipped with a flow

Filling machines

The Enolmatic is the only bottling machine with professional features and performance in a compact size and extremely easy to use. The Enolmatic filling machine is an ideal tool for producers who need a functional, compact, and professional accessory for bottling oil. Despite its small size, it delivers high performance, with a working capacity of 150 bottles per hour. This versatile and efficient product is also suitable for handling food-grade liquids such as oil, tomato sauce, and fruit juices. With specially designed kits to adapt its functionality to any need, it is the perfect ally for producers and small businesses in the sector.

Spare parts and accessories

Ideal for oil and viscous liquids producers, the Enolmaster filling machine is a semi-automatic professional tool designed for businesses and individuals to bottle oil and viscous liquids while preserving their organoleptic properties. This filling machine is suitable for filling glass bottles and flasks. Its structure, entirely made of stainless steel, ensures stability and durability while also facilitating cleaning.

The Enolmaster semi-automatic professional filling machine is equipped with a vacuum suction system specifically designed for food-grade liquids. The product is bottled naturally through the artificial vacuum created in the bottle, helping to maintain the organoleptic characteristics intact.

Bot./h approx.

Filling Machines

WEIGHT-FILLING MACHINE FOR CANS

Olea M12 platform filling machine with electronic indicator. This machine allows filling up to 120 cans of 5 liters per hour. It is extremely practical and precise, as with a single action (placing the can on the scale), the can is filled electronically. During the filling process, the display shows the instantaneous and final quantity.

Composed of:

• Stainless steel bench

• Liverani pump (flow rate: 1200 L/h)

• Dosing pipe support

• Electrical panel support

• Dosing pipe in AISI 316 stainless steel

• Stainless steel electrical panel

• Weighing platform

• Solenoid valve connection with clamp fitting

• Solenoid valve

• Spout (1 for bottles and 1 for cans or demijohns)

• Centering collar

• Centering stop

• Vertical locking knob

• Centering adjustment knob

• O-ring gasket 4061

• Pump hose fitting

• Spout O-ring gasket 4075

Capping machines

The Capsy 40 is a semi-automatic capping machine designed for screwing caps with a diameter of 31.5 mm. Powered by electricity via a 0.25 kW motor, the Capsy 40 is provided of a tabletop structure made of AISI 304 stainless steel and an automatic descending capping head with a micro switch and four rollers.

Features:

• Structure: AISI 304 stainless steel

• Controls: 24V

• Capping head: Automatic 4-roller descending with micro switch

• Motor power: 0.25 kW (0.33 HP), 220V/50Hz

• Bottle format: Max diameter 200 mm, Max height 350 mm

• Cap diameter: 31.5 mm

• Dimensions (mm): 500 x 500 x 1000 (h)

• Weight: 40 kg

The Capsy 4 lever capping machine is used for sealing aluminum screw caps with a Ø 31.5 mm, suitable for oil and liquor bottles, on both plastic and glass containers. The machine is equipped with 4-roller heads. The usage is simple: once the lever is adjusted to the bottle size, the start button is pressed, and the head is brought close to the bottle, threading and sealing the cap in just a few seconds.

Features:

• Tabletop design structure in AISI 304 stainless steel

• 24V controls

• Motor power: 0.18 kW (0.25 HP)

• Bottle format: Max diameter 200 mm, Max height 350 mm

• Dimensions (mm): 500 x 500 x 1160 (h)

• Weight: 40 kg

Sealers and Capping machines

Heat shrinker

The capping machine is a professional tool designed to assist small companies or hobbyists in sealing bottles intended for beverages and food products such as wine, oil, beer, vinegar, liqueurs, and more. The device applies a secure closure system to containers using heat-shrink PVC capsules.

Hand Pvc Capsule Heat Shrinker

Pvc capsule blow-dryer heat shrinker

Hand Pvc Capsule Heat Shrinker

Pvc capsule blow-dryer heat shrinker

Pvc capsule stainless steel table-top heat shrinker

Pvc capsule enamelled table-top heat shrinker

Pvc capsule stainless steel table-top heat shrinker

Pvc capsule enamelled table-top heat shrinker

Spare parts for heat shrinker

Resistor for Hand Pvc Capsule Heat Shrinker

Resistor for Pvc capsule blow-dryer heat shrinker

Resistor for capsule sealer table-top

Sealers

Sealing machine for pre-threaded screw caps. A useful tool for those who wish to securely store their olive oil in bottles. Its compact structure takes up minimal space and is easy to handle, store, and transport. Lever and Wheel models of sealing machine are available.

Professional and industrial labeling machines provide exceptional support to complete your food product packaging efficiently and effectively. Ideal for companies as well as amateur producers, these tools are the perfect choice for offering your customers wellfinished, high-quality bottles ready for sale and distribution on the market.

SKU Description

b/h App.

b/h App.

b/h App.

b/h App.

b/h App.

b/h App.

b/h App.

b/h App.

OLIVE OIL TIN CANS

Food-grade can designed to store Olive Oil and Extra Virgin Olive Oil, equipped with a carrying handle. The cans are made of tinplate (mild steel) coated with a layer of tin, which serves to protect the food from chemical alterations.

CLP0001.32

CLP0010.32

CLP0013.16

CLP0023.16

CLP0033.12

CLP0038.4

CLP0042

CLP0015.16

CLP0026.12

CLP0009.28

CLP0060.12

CLP0064.35

CLP0057.35

CXP0081.50

Customization

Green with yellow drops

Green with yellow drops

Green with yellow drops

Green with yellow drops

Green with yellow drops

Green with yellow drops

Green with yellow drops

Tree

Tree

Dark green Matt black

Cylindrical glossy black

Cylindrical glossy black

Black with olive graphic

x 46 x 110

x 70 x 177

x 92 x 194

x 92 x 260

x 120 x 313

x 155 x 305 Ø 286 x 445 150 x 92 x 260

150 x 120 x 313 84 x 57 x 139

150 x 120 x 313 Ø 67 x 207 Ø 67 x 282

Spare parts and accessories for olive oil tin can

TXP0105.32

Caps for oil tins with plastic pourers 0,25 L Ø24

Caps for oil tins with plastic pourers 0,5/1/2/3 L Ø32

Caps for oil tins with plastic pourers 5/10/25 L Ø42 Caps for oil tins with plastic pourers 5/10/25 L Ø42

Golden screw cap pre-threaded drip catcher Ø31,5 cylind. tin can

Black screw cap pre-threaded drip catcher Ø31,5 cylind. tin can

Dorica bottles are the most classic container for preserving oil and food-grade liquids at their best. Made of colored glass, they provide excellent protection for the product’s organoleptic properties while presenting it in a stylish and distinctive container perfect for the table. Available in colors ranging from green to brown.

Containers

Marasca

Marasca bottles are ideal containers for the storage needs of small amateur oil producers. With their square shape, they effectively protect the quality characteristics of the oil.

CVP0102.165

CVP0111.88

CVP0099.108

CVP0473.56

CVP0105.42

CVP0031.42

CVP0107.35

CVP0109.35

CVP0112.24

CVP0115.24

CVP0117.20

CVP0119.20

Self-sealing cap

cap

cap

cap

Screw cap

Screw cap

Screw cap

Screw cap

Screw cap

Screw cap

Screw cap

Screw cap

Screw cap

Caps for Marasca

Reginolio with not refillable DOP Guala cap

Reginolio bottles are characterized by a more elegant design compared to other bottle types. Equipped with the DOP Guala closure system, they are the top choice in public settings where compliance with regulations on quality and transparency in the virgin olive oil supply chain (Art. 7, paragraph 2) is required.

Containers BOTTLES

Opera

It can be capped with a synthetic mushroom cap Ø 19 to be purchased separately.

The Opera bottle is perfect for storing flavored oil, liqueurs, aromatic spirits, and other gourmet products. It is characterized by a round base, a thin and elongated neck, giving it an elegant appearance. Available in white, UVAG, and satin white colors. SKU Capacity (L)

CVP0132.50

CVP0134.70

CVP0139.20

CVP0137.20

CVP0136.20

Ø 43 x 192 Ø 50 x 253

Ø 68 x 313

Ø 68 x 313

Ø 68 x 313

Anfora Soubreme

The Anfora Soubreme bottle is characterized by elegant lines, which make it particularly suitable for oil storage. Its banded spout is designed with an anti-drip function, ensuring precise dispensing and minimizing product waste. The shape of these Soubreme containers is reminiscent of traditional Egyptian amphorae, with a long neck and a side handle to facilitate pouring oil or other liquids stored in the bottle.

Band mouthpiece with drip catcher

CVP0019.48

CVP0021.31

Anfora Egizia

The Anfora Egizia bottle is an elegant container, perfect for storing and presenting oil, vinegar, and other food-grade liquids. It is made of semi-transparent white glass and stands out for its harmonious shape and balanced dimensions, making it easy to handle, while adding a touch of refinement to the table.

Band mouthpiece with drip catcher

It can be capped with a synthetic mushroom cap Ø 19 to be purchased separately. It can be capped with a synthetic mushroom cap Ø 19 to be purchased separately.