Your machines are profitable when they are producing. They should run during the day, in off-peak hours and at night, even on weekends. Achieving this goal means combining all production requirements in a plan.
The plan is called “Flexible Manufacturing Concept – FMC”. It is implemented in carefully measured steps.
The EROWA Robot Compact 80 provides the right balance between a large number of magazine locations and a small footprint.
Fast start-up by a practical Monoblock architecture: installation – connection – alignment – production.
The high and slender design of the robot is suitable for optimal use of space in the workshop.
The modern LED display for the current operating mode is clear and fully integrated.
THE ULTIMATE SPACE-SAVER
• Requires only 2 m2 footprint
• Large and flexible magazine capacity, from small ITS holders to large UPC 320 pallets
• Fast start-up
• Attractive price with plenty of power
The swing doors allow easy access to the workpiece magazines.
Also the optional loading station can be integrated to save space.
If required, the Robot Compact 80 can supply two machines with workpieces.
With EWIS™ RapidScan, the EROWA Robot Compact 80 is always informed about magazine use.
EROWA robots are known to increase machine productivity significantly.
A manufacturing cell with two machines and a EROWA Robot Compact 80 takes up little space.
• Supplies two machines
• Automatic pallet identification
• Optimum use of space
No automatic door in the machine panel? We gladly install one for you. The EROWA RoboDoor is activated by the robot.
The rack magazines are configured as demanded. Mixed operation of different pallets is possible.
From small to quite large. The EROWA Robot Compact 80 moves up to 11 different pallet sizes for different workpiece sizes.
Even large UPC 320 pallets of up to 80 kg transfer weight are loaded accurately onto the machine.
Adapter pallets
One UPC chuck on the machine table - all system sizes automatically exchangeable.
LARGE AND SMALL MIXED
• Automatic mixed operation with different pallet sizes
• Always clean chucks with matching covers
• Integrated pallet identification
Always clean chucks. Also the proper covers are assigned automatically during the change process.
Mixed operation with different pallet sizes.
The magazine levels are tailored to the requirements. Hanging or standing electrodes, pallets of different sizes and the length of the workpieces are accommodated.
Turntable with 4x90° indexing and pallet lock.
Integrated loading station (optional). For setup of large and heavy workpieces at the ergonomically correct height while the robot is working. This is efficient use of time.
Setup and preparation while the robot is in action.
ADAPTING TO YOUR NEEDS
• Flexible arrangement of the magazine levels
• Loading station for heavy workpieces
• Pull-out magazine levels
• User-friendly and ergonomic operation
Easy loading and unloading by pull-out magazine drawers. The pull-out is triggered by the integrated handle positions.
The pass-through, the new and ingenious solution to magazine loading with electrode holders. The holders are loaded and replaced from the operator‘s side of the magazine.
The pull-out magazine levels are also convenient for loading the magazine with an EROWA lift or an overhead crane directly to the magazine position.
With over 300 palleted workpieces in the magazine, every nighttime hour is used for production.
Retrofitting is fast, easy and space-saving. The third magazine for the EROWA Robot Compact 80. This increases the capacity for palletized workpieces by 50%.
Different parts are processed in small batches automatically.
Recessed door handle. The release request is made by the round illuminated button.
EXTENDABLE
• 50% more autonomy
• Mixed pallet sizes
• Space-saving additional magazine
The EROWA Robot Compact 80 automatically changes the grippers according to the pallet size.
When space is limited, the sliding door provides a viable solution.
For largest possible elbow room from the machine, simply slide the EROWA Robot Compact 80 to the side.
To be truly flexible, it must be possible to work on the machine both automatically and manually.
Simply ingenious! The robot is pneumatically lifted and moved away. Alternatively, a lift truck can be used as well.
• Machine access guaranteed
• Precise positioning
• Retrofittable sliding unit
For manual work, for set-up or repairs and maintenance, the robot is simply pushed aside. Safety zone can be supplied.
When lowering to the exchange position, the robot is reliably aligned via the positioning.
More autonomy for your machine, but only little space? A typical case for an EROWA Robot Compact 80. On a footprint of only 2 m2, it offers over 200 magazine positions. And if you want it to, it will supply two machines.
EROWA Robot Compact 80 with an additional magazine. Over 300 workpieces are available for machining.
EROWA Robot Compact 80 loads a machining center from the side. The PC panel (optional) allows the robot to be robot can be operated ergonomically.
Robot Compact 80 in front of a milling machine. Is pushed to the side if necessary.
Robot Compact 80 between an EDM machine and a milling center.
ALWAYS FITS
• Between machines
• Beside machines
• In front of machines
Long experience – short start-up. EROWA robots consist of sophisticated, standardized components. This allows short set-up times.
Everything from one single source
Independent partner
Perfect service with worldwide presence
Experience with over 4000 robots
Standardized interfaces
Long-life systems
Integrated security system
Only 2 m 2 for over 200 magazine positions
Supplies one or two machines
Flexible magazine configuration
Mono-block design
Over 300 pallet positions with additional magazine
Automatic gripper change depending on pallet size
Automatic pallet identification via chip
Sliding unit for machine access
Sliding doors for magazines
Airdock for direct airsupply to table chucks
TECHNICAL DETAILS
Transfer
Swivel arm Yes
Gripper change Yes
Weight
Two-machine operation Yes TRANSFER
MAGAZINES
Two integrated magazines max. 12 levels per magazine
Third magazine (option) max. 12 levels
Loading station UPC/PC210 (option) Yes
Pass-through magazine for Yes
ITS Compact/50/72 hanging ELECTRONICS
Automatic pallet recognition Yes / EWIS™
Process control system interface Yes
RCS 5 gripper for PalletSet W. At the same time, interface for all other exchange grippers.
Load capacity horizontally/vertically max. 80 kg.
PC210 gripper for PC210 pallets with ring groove. Load capacity horizontally/vertically max. 80 kg.
ITS 148 gripper for ITS 148 pallets. Load capacity horizontally max. 40 kg, vertically max. 30 kg.
ITS 115 gripper for ITS 115 pallets. Load capacity horizontally max. 40 kg, vertically max. 30 kg.
Gripper for ITS holder 72
Load capacity horizontally max. 20 kg, vertically max. 10 kg.
S gripper for ITS holder.
Load capacity horizontally max. 20 kg, vertically max. 10 kg.
S gripper for ITS holder C.
Load capacity horizontally max. 20 kg, vertically max. 10 kg.
Combo gripper for ITS and Compact tooling. Load capacity horizontally max. 8 kg, vertically max. 5 kg.
EROWA AG, founded in Switzerland in 1971, is now a globally operating organization specializing in the development, production, consulting, and distribution of state-of-the-art manufacturing technology for tool and mold making, as well as for production and precision engineering. With their headquarters located in central Switzerland, EROWA ranks among the world‘s leading companies in clamping technology and automation. Having 13 subsidiaries and 22 representatives, EROWA offers international points of contact and worldwide customer service.
EROWA Group Business Network: a member of ORENDA Holding Ltd. Subject to technical changes. Registered trademark of EROWA AG, Copyright © EROWA AG, patents are existing or pending for a number of products of EROWA AG.
The next step towards greater efficiency, precision and productivity starts now. With EROWA, you have a partner who will optimize your production holistically - from clamping technology to automation and process control. Our innovative solutions adapt flexibly to your requirements and grow with you - for production that is ready for tomorrow. Get in touch with us - we will be happy to assist you.