City-20%Restore Mine:103
City-Open Pit:32
LODE:462KM PIT:780
REUSE
PROJECT TYPE：Ecological Transformation
City-Nature-20%Restore Mine:62
Nature-20%Restore Mine:22
City-60%Restore Mine:100 Nature-60%Restore Mine:15 City-Nature-60%Restore Mine:76 City-Aquifer Pit:34 Nature-Aquifer Pit:77 City-Nature-Aquifer Pit:41 City-Flat pit:27 Nature-Flat pit:50 City-Nature-Flat pit:60
Nature-Open Pit:63 City-Nature-Open Pit:18
LOCATION：Brumadinho，Minas Gerias，Brazil
TYPE:Academic,Individual Work
YEAR OF COMPLETION：04/2024-08/2024
TUTOR：ZiHeng Li liziheng9816@gmail.com
With industrialisation, the demand for minerals is increasing. However, mining destroys ecosystems, and the wastewater and waste discharged from mining pollute water, soil and air, threatening human health. Brazil is rich in mineral veins, but with this comes a variety of pollution problems. Therefore, this project is based on the restoration and utilisation of Brazilian veins based on their damage to nature.
Consequences
LODE MEETING:33 Economic Of Minas Gerias
Tailings Dam Failures in Brazil between 2000-2023 Site
Distribution Of Pits At Risk Of Collapse
GPD Effects
Design Strategy
Because of the different degrees of ecological restoration of the pits on the site, the design classifies the pits, and according to the location of the pits, the degree of restoration of the pits decreases from the urban area to the natural area, so the design divides the area into three parts, and classifies the design according to the type of pit in each part.
Travel Line Indication Point-City
Mine pits in urban areas are focused on enriching and reinforcing vegetation, and there is a greater emphasis on the reuse of mine pits. Therefore, the project has designed a series of activities using different types of pits.
This page shows the actual results of urban and rural pit rehabilitation, and demonstrates the ecological reconstruction of mining areas by comparing the rehabilitation of pits in different regions. Specific content includes showing the lateral ecological changes of pit rehabilitation through detailed profiles, and analysing the characteristics and effects of pit rehabilitation methods within two different regions through profile comparisons.
Travel Line Indication Point-Nature
Pit rehabilitation in natural areas promotes plant growth mainly through vegetation fixation. Economic growth and ecological restoration are promoted through the development of joint towns and cities through a model of animal husbandry, agriculture and tourism cycles
Water Retention Strategies Wetland Rendering
Restoring wetland functions to the original mine pits through water retention and supply methods and transforming them into wetland parks.
MARINE PATCHES MASTER PLAN
The project has developed a response programme for a nine-kilometre stretch of coast affected by tidal debris in Bali. The programme combines waste collection and treatment with human activities, constructing distinctive landscapes within each type of collection circle, while the circles include not only treatment plants but also a range of services such as hotels, bars, pools, restaurants and other facilities, turning them into tourist attractions.
GARBAGE DISPOSAL SYSTEM
When a person receives a collection signal from the monitoring system, the waste in the large waste collection unit is cleared and transported by boat to the waste circle for waste disposal. At the same time, oysters, seaweed and cm type rubbish collection units connected by rails are transported by rail to the main dock and then manually transported to the corresponding treatment plant. Inside the rubbish disposal circle, visitors can see the treatment process at the plant and participate in making rubbish crafts.
Ocean Pudding Rendering
Kelp Circle Rendering
Beach Rendering
Modelling And Production Production Process
Model information
Model Scale: 1:1000
Model Size:1.5*0.6M Materials:Foam Board, Drip Glue, Resin,Pigments
Waste Disposal Circle Handmade Model
The model is made from the main body made from drip glue, foam board, and resin material. The main body of the building is made of resin material, which is accurately shaped by 3D printing technology, and then it is sanded and processed and then sprayed with special paint for colouring, in order to show the realistic texture and colour effect. The ocean part firstly cuts out the seabed texture from the bubble template, and then brushes out the seabed colour through pigment to simulate the seabed effect. Then, the drip glue is mixed with colour, and the modulated drip glue is slowly poured into the pre-designed moulds to form a realistic seawater effect after curing. Finally, the model is assembled and put together to complete the modelling.
LOCATION:Kai Tak, Wong Tai Sin, Hong Kong
TYPE:Academic,Individual Work YEAR OF COMPLETION：08/2024-11/2024
TUTOR：NianFei Liu nianfei.liu@gmail.com
Contemporary urban buildings are becoming denser as the population increases. In the context of high-density cities, the needs of older persons, especially their emotional needs, are often overlooked in planning because of inadequate site conditions. Therefore, this project aims to grow the city upwards and to design the city with the needs of the elderly in mind, catering for all age groups.
Site Derivation
Problem Analysis
Reasons Of Social Isolation Causing
Transport Issues
Built Environment Issues
Design Strategy
Effective Demonstration
