https://tiendabarmesapumps.com
6" ENCAPSULATED SUBMERSIBLE MOTORS
SINGLE-PHASE 5-15 HP AND THREE-PHASE 50-60 HP 200-575 VOLTS 60 AND 50 HZ APPLICATIONS These motors are built for dependable operation in 6-inch diameter or larger water wells. Temperature and time ratings are continuous in 86 °F (30 °C) water at 1/2 ft./sec. flow past the motor. Rotation: singlephase, CCW facing shaft end; three-phase, electrically reversible.
FEATURES
Kingsbury-type water lubricated thrust bearing
Anti-track, self-healing resin system
Pressure-equalizing diapragm
Hermetically-sealed windings
Sand slinger
Removable Water-Bloc™ lead
3-lead and 6-lead (Wye Delta) configurations for 3-phase
Double-flange design
Copper bar rotor
316 Stainless Steel: Special construction option for acid, low pH, and seawater applications. All 316 SS motors include a Subtrol-Plus™ heat sensor.
Sand Fighter® models include SubTrol-Plus™ heat sensor on 40, 50, and 60 hp models. SUBMONITOR™ OVERLOAD OPTION FOR THREE-PHASE MOTORS A field proven and contractor friendly premium motor protection system. It protects the motor against overload, underload, excessive winding temperature, and rapid cycling. It also extends the motor warranty to a full three years.* The motor must be manufactured with a Subtrol-Plus heat sensor. *Contact factory for warranty details.
WARNING: Serious or fatal electrical shock or fire hazard may result from failure to follow the instructions for proper installation and use which accompany this equipment. Do not use motor in swimming areas.
SPECIAL FEATURES
Cotización: https://podio.com/webforms/19719714/1335065
Stainless steel shell
Maximum temperature winding wire NEMA class 200
Over-molded lead for cable resilience.
Full 3450 RPM design point
https://tiendabarmesapumps.com
6" ENCAPSULATED SUBMERSIBLE MOTORS AVAILABILITY Single-Phase Capacitor start, Capacitor run (Control box required) HP
KW
5 7.5 10 15
3.7 5.5 7.5 11.0
“L” Dim IN 25.4 28.0 30.6 33.1
CM 64.6 71.1 77.7 84.2
316 SS “L” Dim CM IN 25.0 63.6 27.6 70.1 30.2 76.6 32.7 83.1
Shipping Weight
316 SS “L” Dim IN CM 22.5 57.1 23.8 60.4 25.0 63.6 70.1 27.6 30.2 76.6 32.7 83.1 35.3 89.6 40.4 102.6 54.9 139.4 60.9 152.1
Shipping Weight
3.000 2.997
3.000 2.997
1.0000 0.9995 DIA.
KG LBS 0.94" MIN. 112 51 FULL SPLINE 125 57 143 65 156 71
2.875 2.869
1.0000 0.9995 DIA.
0.94" MIN. FULL SPLINE
2.875 2.860
0.250 0.240
0.250 0.240
Cotización: https://podio.com/webforms/19719714/1335065
Three-Phase HP
KW
5 7.5 10 15 20 25 30 40 50 60
3.7 5.5 7.5 11.0 15.0 18.5 22.0 30.0 37 45
“L” Dim IN 22.9 24.2 25.4 28.0 30.6 33.1 35.7 40.8 55.3 61.3
CM 58.1 61.4 64.6 71.1 77.6 84.2 90.7 103.7 140.5 155.7
Note: 60 Hz - 3,450 RPM 50 Hz - 2,875 RPM
LBS 103 110 118 131 147 158 176 206 300 330
"L"
KG 47 50 54 60 67 5.44 DIA. MAX. 72 80 94 136 150
"L"
5.44 DIA. MAX.
WATER WELL
316 SS
CONSTRUCTION MATERIALS Component UL Insulation Class Rating Motor Ambient Temp. Rating Stator Resin Type Motor Fill Solution (Water Soluble/Non-Toxic) Top End Bell and Thrust Housing Stator Shell Stator Ends Shaft Extension Bushing Bushing Retainer Shaft Mechanical Seal Mechanical Seal/Rubber Components Diaphragm Material Diaphragm Plate Diaphragm Spring Shaft Slinger Lead Wire Lead Potting Lead Jam Nut
Sand Fighter Class F 86 °F/30 °C Standard
Construction Type Corrosion Resistant (316 SS) Class F 86 °F/30 °C Standard
FES91
FES91
Epoxy-coated Gray Iron 300 Series SS Carbon Steel 300 Series SS 316 SS 300 Series SS Sand Fighter Seal System
316 SS 316 SS 316 SS 17-4 SS 316 SS 316 SS Sand Fighter Seal System
Nitrile
Nitrile
300 Series SS 300 Series SS Nitrile Overmolded Epoxy Brass 3500 lbs (7.5-30 hp) Thrust Bearing Rating (86°F/30°C) 6000 lbs (40-60 hp) Method Of Connecting System Ground to Motor Ground wire in power lead connector
316 SS 25-6 MO SS Nitrile Overmolded Epoxy 316 SS 3500 lbs (7.5-30 hp) 6000 lbs (40-60 hp) Ground wire in power lead connector
Note: Specifications subject to change without notice. Contact Franklin Electric if current material types are required for bid specifications.
franklinwater.com
M1302 08-20