Burson Tools & Equipment - April-June 2026 by Woof Creative

TOOLS EQUIPMENT

Upgrade your workshop now and reduce your tax.

Small Business $20,000 Instant Asset Write-off ends 30th June 2026.

If a workshop upgrade has been on the to-do list, now’s the time. The Government’s $20,000 instant asset write-off is available until 30 June 2026, giving eligible small businesses a chance to claim the tax benefit sooner rather than spreading it over years.

In simple terms, you can claim the full cost of many tools and equipment in the same financial year you buy them. That can lower your taxable income straight away and help improve cash flow.

Whether it’s a major upgrade like a new hoist, replacing essential gear, or adding tools you rely

on every day, the instant asset write-off can help you keep more money in the business. It’s not free money, but a tax deduction that can make a real difference when used properly.

With the incentive ending in June 2026, acting sooner could help reduce the tax you pay and support your next workshop upgrade.

For full details, including eligibility requirements, visit the website.

• 4.5T lift capacity.

• Designed and tested to 20,000 cycles at full loaded capacity.

• Original “double-S” column design for strength and longevity.

• 3 stage front & 2 stage rear load arms.

• 3 stage adjustable load pads.

• Industry lowest 85mm minimum load pad height.

• Single point lock release.

• Automatic arm locks.

• ALI Gold Label Certified and independently tested.

• Low profile roof protection bar.

• High pressure hydraulic cylinders with ultra-durable seals.

• Powder coat finish with four standard colours available.

• Up to 5 year warranty.

• 89mm & 127mm adaptor extensions included.

• Truck adaptors included.

• Available in 415v and 240v.

• Available in three height configurations.

• Suitable for all vehicle types under 4,500T (including EV).

• Manufactured by Rotary Solutions. 4.5T

•

• 4.5T Lift Capacity.

• 3.5T Lift Capacity.

• Designed and tested to 20,000 cycles at full loaded capacity. Dual Lifting cylinders.

• Non-slip deck padding.

• Ramps and side drive-over accommodate wider wheel bases.

• ALI Gold Label certified and independently tested.

• Manufactured by Rotary Solutions

3.5T MID RISE SCISSOR LIFT XS35N $40.45 PER WEEK*

• Manufactured by Rotary Solutions 4.5T LOW RISE SERVICE LIFT

• Designed and tested to 20,000 cycles at full loaded capacity.

• Low-profile design with integrated load-rated folding ramps.

• 24 lock positions with negative rake tooth design.

• Lift dampener for softer descents.

• ALI Gold Label certified and independently tested.

• Safety side foot protection bars included.

• Composite high strength steel construction with diamond plate powder-coated platforms.

• Up to 5 year warranty.

• Flush and surface mount installation options available.

•

$ 8,895

•

• 5.5T Lift Capacity.

• Manufactured by Rotary solutions. •

• Designed and tested to 20,000 cycles at full loaded capacity.

• Open front and rear with no structural connection between platforms.

• 2100mm long rear slip plates.

• 1870mm lift height to top of platform.

• Supplied with integrated alignment kit.

• 4800mm platform length.

4T ALIGNMENT READY SCISSOR LIFT STS40A $ 17,995

• 4T Lift Capacity.

• Designed and Tested to 10,000 cycles at full loaded capacity.

• 2 Year Warranty. Full length alignment scissor with rear slip plates.

• Upper and Lower limit switches.

• Advanced electro-hydraulic control technology.

• Master-Slave synchronised hydraulic system.

• Mechanical safety locks automatically engage.

• 625mm Wide runways.

• Automatic rear wheel chocks.

• Easy to adjust platform spacers.

• Manufactured by Rotary Solutions.

3.0T

• 6.2T Lift Capacity.

• Wireless Mobile column lift.

• Lift height of 1,753mm.

• Battery operated, meaning no power cords.

• Locklight standard on all column lifts.

•

• 7.5T capacity.

• Wireless Remote Control Mobile column lift.

• Battery operated meaning no power cords to clutter the service bay.

• Integrated lock light on all models.

• Load sensing forks.

• Height sensing carriage.

• Manufactured by Rotary Solutions.

• Compatible with 120204

• King Pin support to lift trailers.

• Max 125mm Diameter.

• 12.4t Capacity.

• 918mm Height.

• Manufactured by Rotary Solutions.

• Compatible with MC75/MC62

• 9T Lifting Capacity.

• Screw-type adjustable safety stand.

• Work on multiple vehicles simultaneously.

• 1400mm-2140mm height range.

• Manufactured by Rotary Solutions.

• Compatible with MC75-FLEXMAX

• 9144mm Runway length.

• Optional rolling jacks available.

• No 4 Post cables or pulleys to maintain.

• Work on two trucks simultaneously with the optional RS20SYYL stands.

• Mobile Columns Sold Separately.

• Internal airlines included for tools and rolling jacks.

• Manufactured by Rotary Solutions MACH 4 MOBILE

Extra-thin movable crossbeam for wheel free lifting of vehicles.

• Includes 4 swivel wheels and lifting adaptors.

• 225mm height.

• 12.4t capacity.

• Compatible with MC62/MC75 Columns.

• Manufactured by Rotary Solutions.

• Compatible with MC75/MC62

• Durable weather covers.

• 121811Y Compatible with MC62.

• 121811YA Compatible with MC75.

• Allows for full control while covered from the elements. $ 595 DURABLE WEATHER COVER 121811Y/121811YA

• 3 position pedestal with self-locking plate.

• Integrated front loading wheel lift.

• Wheel clamping range 10” to 30”.

• Variable speed rotation motor.

• Power-Assisted bead mount-demount tool.

• Quick -Lock rim clamping device with cone guard. Integrated patented powerful bead setter.

• Pedal operated inflation with quick inflating valve.

• Power-Assisted top bead press arm.

• Memory Feature for repositioning of mount/demount head.

• Laser guided tool positioning.

• Auto-Indent prevents rim damage.

• Manufactured by Rotary Solutions.

$ 12,295 $ 27,995

• Double synchronization for load distribution.

• Adjustable tool guide for alloy rim protection.

• Bolt caps to prevent hooking of air hoses.

• Integrated helper arm included.

• Lower bead lifting roller.

• Hand controlled bead breaker.

• Pneumatic top bead pressing tool.

• Filter, Tyre paste lubricant and brush included.

• Large 26” external rim clamping capacity.

• Manufactured by Rotary Solutions

• Pneumatic Tilting column ensures peak rigidity.

• Large 24”external rim clamping capacity.

• Pedal operated tubeless

• tyre inflation system.

• Double-acting bead breaker cylinder.

• Spring loaded hexagonal shaft with pneumatic locking device.

• Removable pedal unit for easy maintenance.

• Plastic jaw & mounting head protectors.

• Heavy-Duty sturdy construction.

• Low profile helper arm.

• Manufactured by Rotary Solutions.

• Pneumatic mounting mast with automatic forward and back.

• Pneumatic mounting head & shaft.

• Pneumatic clamping system with 22” external clamping capacity.

• Pneumatic bead breaker.

• Pneumatic low profile helper arm.

• Tubeless tyre inflation.

• Sturdy construction.

• 240v Standard.

• Strong, reinforced pneumatic mounting mast.

• Unique turntable clamping system ensuring powerful and uniform clamping.

• Pneumatic “new generation” low profile assist arm.

• Adjustable bead breaker arm to accommodate a wider range of wheels.

• Pneumatic mounting mast with automatic forward and back.

• Two speed turntable.

• Pneumatic bead breaker.

• Pneumatic mounting head & shaft.

• Pneumatic clamping system with 24” external clamping capacity.

• Tubeless tyre inflation.

• Heavy duty construction.

• 415v standard. $ 6,495 $ 2,995 $ 4,995

• Manually operated swing arm design with locking device.

• Pneumatic clamping system with 20” external clamping capacity.

• Plastic jaw & mounting head protectors.

• Sturdy construction.

• Tyre inflator. 240v Standard.

$59.69 PER

R155 $ 10,995

• 19” Linked keyboard monitor.

• 8 Piece double sided collet set.

• Easy operation with interactive inputs guide. Internal data arm.

• Laser blade for weight position.

• Double LED illumination of weights.

• Sonar laser with sensor.

• Quick lock wingnut.

• Manufactured by Rotary Solutions.

WITH 19” DISPLAY

XXX $ 4,995

• Automatic measuring & input of rim diameter, width & offset using automatic measuring arms.

• Split weight program for concealed attachment of weights.

• Durable weight tray together with a side storage cabinet for ample storage of wheel weights.

• Rim width 40-510mm (1.5” - 20”) Rim Diameter 265 - 812mm (10”-32”)

• Automatic Start & Stop.

• Multiple alloy programs.

• 19” flat screen monitor.

• 240v Standard.

• Automatic measuring & input of rim diameter, width & offset using automatic measuring arms.

• Bright & Easy to read LCD display monitor with 3D graphics. Automatic start by closing hood.

• Automatic stop in position of weight placing.

• Rim width 40-510mm (1.5”20”). Rim Diameter 265mm812mm (10”-32”).

• 240v Standard.

• Tablet operating system allows technician to read and make adjustments anywhere in the bay.

• Easy to follow alignment process with animated instructions and live results.

• Exclusive 3D targets with solid vision technology. High resolution fixed cameras for precision target reading.

• Exclusive 3-point quick locking tyre clamps with 8”-24” rim capacity.

• Get alignment readings in just 8 seconds.

• 32” LCD Monitor.

• No need for roll-back compensation on most vehicles.

• Australian and International database with more than 90,000 vehicles.

• Portable aligner can be positioned anywhere.

• Manufactured by Rotary Solutions.

• Tablet based multi-axel 8-CCD wheel alignment system.

• Tablet operating system allows techs to read and make adjustments anywhere in the bay.

• Australian and international database with more than 90,000 vehicles.

• Wireless measuring heads communicate via Bluetooth.

• Supplied with standard steering lock and brake pedal lock.

• Animated instructions and 3D animation showing alignment specifications.

• Quick run-out compensation.

• Vehicle spoiler program to measure lowered vehicles.

• Manufactured by Rotary Solutions.

Double inclinometer allows for caster adjustment without steering. Fast-setup, no run-out compensation. 890-1290mm tyre clamping range. Front measuring heads with extended drop down sensor frame for busses. Remote control function. Customer databank can record 20,000 jobs. 27” LCD monitor. Turntables included as standard. Enclosed cabinet charges sensor heads when not in use. Manufactured in Italy by Rotary Solutions. $

6-CCD Wheel alignment system. Global database with more than 90,000 vehicles.

Infra-red transmission from measuring heads.

Universal use for floor, pit or hoist operation.

3D animation showing alignment specifications.

HD TYRE CHANGER

$59.69 PER WEEK*

10,995

• Designed for use with heavy vehicle types.

• Rim clamping 13” - 27”.

• 5 different rim locking positions.

• Mobile control unit. Mobile tool holder.

• Heavy Duty Construction.

SUPER DUTY COMMERCIAL TYRE CHANGER

$88.30 PER WEEK*

$ XXX 15,895

Service Truck Bus, Super Single, Agricultural and Lock Ring tyre and rim combinations.

Portable wired stand.

Quick Locking manual rotation tool.

Suitable for Tube and Tubeless Tyres.

Rim Clamping range 11” to 27”.

Service Tyre Diameters up to 64”.

Hydraulic Wheel Clamping.

Patented tyre lever included.

Includes clamp protection kit and pliers for alloy rims. Manufactured in Italy by Rotary Solutions.

HEAVY DUTY SPEEDCHANGER R501PLUS

$167.69 PER WEEK*

$ XXX $ 31,995

• Dismount and mount a truck tyre in 30 seconds with four roller system.

• Adjustable arm position.

• Ergonomic console panel.

• Hydraulic clamping and Chucking.

• Stand-by function (no noise when not in operation).

• Rin diameter 11” - 27”.

• Maximum tyre diameter 52”.

• Maximum tyre width 21”.

• Manufactured in Italy by Rotary Solutions.

VERSATILE COMMERCIAL TRUCK BALANCER R544

$86.84 PER WEEK*

• Versatile commercial balancer designed for fast and accurate balancing.

• 3D Technology.

• Commercial and Passenger modes.

• Automatic distance and diameter measuring.

• Low rotation speed. Pneumatic integrated wheel lift.

• Pneumatic locking shaft.

• Rim Clamping from 10” to 30”.

• Air-Brake keeps wheel in unbalanced position.

• Auto-Start and Auto-Stop.

• Large display monitor with durable touch pad.

• Balancing programs for static, dynamic and ALU wheels.

• Integrated LED lighting system.

• Manufactured in Italy by Rotary Solutions.

$68.92 PER WEEK*

ELECTRONIC COMMERCIAL BALANCER R540 $ XXX $ 12,695

• Microprocessor controlled programs for self-calibration and all diagnostics.

• Rim Clamping range from 10” to 30”.

• Air-brake keep wheel in unbalanced position.

• Fast and accurate balancing with single data entry.

• Automatic stop-on top / Auto-lock.

• Large digital display.

• Integrated pneumatic wheel lift

• Manufactured in Italy by Rotary Solutions.

$37.56 PER WEEK*

$ XXX $ 6,495

• For passenger, light & heavy commercial applications.

• Manual input of rim diameter, width & offset.

• Digital display with built in control panel.

• Built-in pneumatic wheel lift with 200T capacity.

• 240v Standard $ 15,995

INSULATED AIR/ HYDRAULIC LIFTING TABLE

$57.79 PER WEEK*

$ XXX $ 9,995

• 1.5T Lift Capacity.

• Accommodated EV batteries, Engines and Transmissions.

• Ultimate positioning and flexibility.

• Multi-directional casters with rotational wheels and locks on all four corners.

• Platform tilt and adjustment.

• Split sliding top to increase length.

• Air powered controls easy to access.

• Insulated platform top.

• Air released mechanical locks.

INTEGRATES WITH RT30 REPAIR TABLE FOR MULTIPLE JOBS AT THE SAME TIME.

INSULATED ADJUSTABLE REPAIR TABLE RT30 $ XXX $ 4,595

• 1.3T Lift capacity.

• Insulated platform top,

• Legs swing up for transport and down for stand alone table.

• Table ends extend from minimum 1956mm to 2705mm.

• Table width of 1067mm Integrates with LT35A to create multiple workstations.

• 1T Lift Capacity.

• Additional fixtures can be secured using multi-hole matrix on platform.

• Lowering speed control.

$ XXX $ 4,995

• Large swiveling caster wheels with locking brake.

• Wide base for improved stability.

• Multi-directional tilt adjustment.

226KG AIR WHEEL LIFT MW-500 $ XXX $ 6,295

• 226KG Lift Capacity. Air operated wheel and tyre lift.

• Offers maximum maneuverability with adjustable lifting and lowering speeds.

• Wide base with HD castors for improved stability.

90KG BATTERY WHEEL LIFT

$ XXX $ 3,595

• 90KG Lift Capacity.

• Batter operated - Rechargeable.

• Driven by a powerful electric motor. Easy to maneuverer.

• Built in tray for parts and wheel nuts. Emergency stop button.

• Offset column for easy access to wheel nuts.

• Drop Tail for easy rear wheel access.

• 450KG capacity.

• 2362mm table length.

• 609mm table width.

• Powder coat finish.

• Air operated pedal operation.

• Five locking positions.

• Wheel vise.

• Diamond plate surface.

• Manufactured by Rotary Solutions.

• Shown with optional XLT platform width kit.

• 50T Force.

• Air over Hydraulic operation.

• Sliding work head.

• Adjustable bed height with hand winch.

• Two heavy duty press plates included.

• Heavy steel construction.

• Powder Coat finish.

• Safety grid guard included on all models.

• 30T Force.

• Hydraulic operation.

• Sliding work head.

• Adjustable bed height.

• Two heavy duty press plates included.

• Heavy steel construction.

• Powder Coat finish.

• Safety grid guard included on all models.

• 30T Force.

• Air over Hydraulic operation.

• Sliding work head.

• Adjustable bed height.

• Two heavy duty press plates included.

• Heavy steel construction.

• Powder Coat finish.

• Safety grid guard included on all models.

HAWKEYE ELITE WINALIGN WHEEL ALIGNERS

• Exclusive QuickComp allowing the user to compensate all wheels & capture initial measurements in one motion

• Patented four high-resolution cameras provide measurements with pinpoint accuracy

• Fast set-up, easy-to-use low-maintenance system

• New faster caster procedure - steer left, right & back to centre in quick succession

• Extensive vehicle database with over 50,000 vehicles including both international & Australian

• Windows 10 operating system with WinAlign software

• Supplied standard with 27” colour monitor

• OEM approved models also available

• Perform wheel alignment checks in under 70 seconds

• Patented light-weight 3D target design for extremely fast readings INCLUDES

QUICKGRIP WHEEL ADAPTORS Patented no metal-to-metal contact–designed to grip the tyre not the rim! FROM $ 49,995

14 " TURNPLATES 20-2531-1

$258.12 PER WEEK*

•

• Live Ride Height Measurement

• Check to Manufacturers specs (VAG/Ford)

•

POWERFUL DIAGNOSTIC STRENGTH OF THE PRO SERIES, AND ALSO SUPPORTS SMARTLINK REMOTE DIAGNOSIS.

• INTELLIGENT AND LOCAL DIAGNOSTIC

• 10.1 INCH SCREEN

• EXPANDABLE ADD-ON S/W MODULES

• FULL SYSTEM VEHICLE COVERAGE

•

• Includes Jamec Pems

•

• Hose layering system

• Auto lock/Auto rewind

•

• Accurate within +/- 2.0 PSI

• Lightweight design with comfortable, ergonomic non-slip handle

• Fully integrated combination inflate/deflate trigger

• Rechargeable Lithium-ion battery

• Includes Certificate of calibration

• Accuracy exceeds EN12645:2014 Standards

•

• Fitted with High Visibility Reinforced PVC braided hose

• Controlled Hose Return

• Hose layering system

• Auto lock/auto rewind

• Solid brass internal spindle

• Adjustable hose stop

• Wall mount with 180° pivot

• This inflator boasts a rechargeable battery, a rugged construction ensuring durability

• Accuracy exceeds EN12645:2014 Standards

• High contrast, large VA black LCD screen with white font

• Lightweight and robust

• IP44 rated

• Includes Certificate of calibration

• Includes Calibration Certificate

• Multi scale gauge: psi, kPa, BAR and kgF

• Large LCD backlit digital display

• Audible warning once pressure is reached

• Accuracy exceeds EN12645:2014 Standards

40 seconds is all it takes to ensure your Intelli- Start jump starter is ready to go again!

Our revolutionary and patented Rapid Recharge Technology (RRT) means that once you’ve jump started your vehicle, you just need to leave the Intelli‑Start jump starter ’s clamps connected to your vehicle’s battery for an additional 40 seconds for it to fully replenish the energy discharged and be ready for your next emergency.

With RRT, you can use the jump starter again and again. In fact, you could start an entire fleet without needing to return to your home, garage or workshop to recharge it with the supplied 5V USB charger.