Plain Tiles Contents Plain Tile
2
Vauban Plain Tile
4
20/20 Interlocking Plain Tile
6
301 Smooth Plain Tile
10
Humber Plain Tile
12
Village Plain Tile
14
303 Sanded Plain Tile
16
Alban Plain Handcrafted Tile
18
Barrow Plain Handcrafted Tile
20
Keymer Goxhill Tile
22
Keymer Shire Tile
24
Keymer Traditional Tile
26
Keymer Peg Tile
28
Humber Plain Tile Natural Red
ROOF PRODUCT SELECTOR
38
Plain Tile · Concrete
Plain Tile This versatile cross-cambered concrete tile is perfect for complex detailing and curved roof applications.
Technical data
Roof
Vertical
Colours – Sandfaced
Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m2 Batten size Up to 600 mm rafter centres Nail size/type for tiles
35° 65 mm 100 mm 265 x 165 mm 60 tiles per m2
75° 38 mm 114 mm 265 x 165 mm 53 tiles per m2
165 mm 13 mm 245 mm 768 10 m
165 mm 13 mm 245 mm 768 8.8 m
03 Mottled Red
38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
05 Cornish Grey
06 Brindle
Unless otherwise stated, data is based on tiles laid at minimum headlap. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification. For a copy of A Guide to Plain Tiling – Including Vertical Tiling, by the Roof Tile Association, visit www.clayroof.co.uk.
07 Sandown 165
165
265
Feature Tile Club pattern available.
Colours – Smoothfaced
265
200 247
Feature tiles
roofspec®
quantspec®
Feature tops tiles
2
10 Brown
11 Terracotta Red
12 Rustic
14 Dark Grey
fixspec®
65
120
Feature tile-and-a-half
15 Dark Heather
155
Customer Support Tel: 0844 9395 900
265
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Fittings and accessories Tile fittings:
- Tile-and-a-half tiles - Eaves/tops tiles - Cloaked verge tiles (LH & RH) - External & internal angles (LH & RH)
Feature tiles
- Club
Ridges:
- Half round - Segmental
Mono ridges: Hips: Valleys: See page 122
- Half round - Bonnet - Arris - Half round - Segmental - Valley tiles - Lead - Fibreglass
Roofing systems Dry roof systems:
- Ridge - Hip - Verge
Ventilation systems:
- Ridge - Eaves - Top abutment - Invisivent
See page 128
Humber Plain Tile Natural Red
Plain Tile Rustic
3
Plain Tile · Clay
Vauban Plain Tile Vauban is a New Generation interlocking clay plain tile that gives a clean contemporary look, and can perform down to pitches as low as 22.5°. Vauban has also been designed to perform as a vertical cladding solution.
Technical Data
Colours
Minimum roof pitch* Headlap (minimum) Headlap (maximum) Batten spacing at max. gauge Batten spacing at min. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m2 Batten size Up to 450 mm rafter centres Up to 600 mm rafter centres Nail size/type for tiles Nail size/type for metal tile clips
22.5 ° 93 mm 108 mm 273 mm 258 mm 366 x 202 mm 21.8 tiles per m2 168 mm 20 mm 326 mm 350 2.7 m
703 Slate Engobe
38 x 25 mm 50 x 25 mm 50 x 3.0 mm stainless steel ring shank clout head 55 x 3.35mm aluminium ring shank clout head
600 Natural Red
875 Multiblend
Unless otherwise stated, data is based on tiles laid at minimum headlap. Clay tiles are subject to small variations in size because of drying and firing shrinkage in the manufacturing process. Therefore, before deciding on the batten gauge and cover width, the roof tiler should inspect each batch of tiles to ensure that the correct minimum headlap and sidelap are achieved. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification.
Duracoat ridge see page 46
roofspec®
4
quantspec®
fixspec®
New Generation
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Fittings and accessories Tile fittings: - LH verge tile - Tile-and-a-half tiles (LH & RH verge) - Eaves tile Ridges:
- Duracoat half round - Clay half round
Mono ridges:
- Duracoat half round - Clay half round
Hips:
- Duracoat segmental - Clay third round - Clay half round
Valleys:
- Lead - Fibreglass
Clips: See page 112
- Tile - Eaves - Verge
Roofing systems Dry roof systems:
- Ridge - Hip - Verge - Valley
Ventilation systems: See page 128
- Ridge - Eaves - Top abutment - Tile vent
Vauban Natural Red
5
Plain Tile · Clay
20/20 Interlocking Plain Tile A New Generation interlocking clay plain tile. The 20/20 makes a plain tile roof more affordable through an innovative design that reduces labour and material costs, and cuts completion times.
Technical Data
Colours
Minimum roof pitch* Headlap (minimum) Headlap (maximum) Batten spacing at max. gauge Batten spacing at min. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m2 Batten size Up to 450 mm rafter centres Up to 600 mm rafter centres Nail size/type for tiles Nail size/type for metal tile clips
15°† at 100 mm headlap 22.5° at 75 mm headlap 75 mm 120 mm 255 mm 210 mm 330 x 226 mm 22.7 tiles per m2 at 100 mm headlap 20.5 tiles per m2 at 75 mm headlap 191 mm 16 mm 300 mm 480 4.3 m at 100 mm headlap 3.9 m at 75 mm headlap
65 Natural Red
66 Flanders
68 Antique Slate
69 Tuscan
38 x 25 mm 50 x 25 mm 45 x 3.35 mm aluminium ring shank clout head 55 x 3.35 mm aluminium ring shank clout head
Unless otherwise stated, data is based on tiles laid at minimum headlap. Clay tiles are subject to small variations in size because of drying and firing shrinkage in the manufacturing process. Therefore, before deciding on the batten gauge and cover width, the roof tiler should inspect each batch of tiles to ensure that the correct minimum headlap and sidelap are achieved. †For projects where the rafters are below 22.5º the roof substructure must be installed in accordance with our Low Pitch Installation Guide available at www.wienerberger.co.uk. Concealed tile ventilators must not be used on roof pitches below 22.5º. A low pitch version is available. Please contact Technical Services for further information. Rafter length restrictions apply at minimum roof pitch. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification.
roofspec®
6
quantspec®
fixspec®
New Generation
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Fittings and accessories Tile fittings:
- LH verge tile - Tile-and-a-half tiles (LH & RH verge)
Ridges:
- Duracoat half round - Clay half round
Mono ridges:
- Duracoat half round - Clay half round
Hips:
- Duracoat segmental - Clay third round
Valleys:
- Lead - Fibreglass
Clips:
- Tile - Eaves - Verge
See page 114
Roofing systems Dry roof systems:
- Ridge - Hip - Verge - Valley
Ventilation systems:
- Ridge - Eaves - Top abutment - Tile ventâ€
See page 128
20/20 Tuscan
7
Plain Tile · Clay
20/20 Interlocking Plain Tile ■■
New Generation interlocking clay tile with easy to lay open gauge
■■
Over 30% more cost effective than traditional plain tiles
■■
Reduces completion times by up to 30%
■■
Requires approx. 60% fewer battens
■■
Low pitch recommendation down to 15°†
■■
Half the weight of concrete plain tiles and over 40% lighter than clay plain tiles
■■
Pressed from natural alluvial Humber clay and available in four permanent colours
■■
High performance weatherproof design developed through Intensive wind tunnel testing
■■
Manufactured to Environmental Management Standard ISO 14001
The 20/20 has been designed to emulate traditional plain tiles, particularly when the roof is viewed from ground level. †For projects where the rafters are below 22.5º the roof substructure must be installed in accordance with our Low Pitch Installation Guide. Contact Sandtoft Technical Department for advice and a full roof specification. Rafter length restrictions apply at minimum roof pitch.
8
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
20/20 Flanders
9
Plain Tile · Clay
301 Smooth Plain Tile A traditional clay plain tile that gives complete design flexibility and is perfect for adding character to both roofs and walls.
Technical Data
Colours
Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m² Batten size - up to 450mm rafter centres Batten size - up to 600mm after centres Nail size/type for tiles
Roof Vertical 35° 75° 65 mm 38 mm 102.5 mm 116 mm 270 x170 mm 270 x170 mm 57.4 tiles per m² 50.7 tiles per m² 170 mm 170 mm 12 mm 12 mm 254 mm 254 mm 896 896 9.8 m 8.7 m 38 x 25 mm
38 x 25mm
872 Rustic
600 Natural Red
848 Amarant
873 Toscana
38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
Unless otherwise stated, data is based on tiles laid at minimum headlap. Clay tiles are subject to small variations in size because of drying and firing shrinkage in the manufacturing process. Therefore, before deciding on the batten gauge and cover width, the roof tiler should inspect each batch of tiles to ensure that the correct minimum headlap and sidelap are achieved. For a copy of A Guide to Plain Tiling – Including Vertical Tiling, by the Roof Tile Association, visit www.clayroof.co.uk. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification.
roofspec®
10
quantspec®
fixspec®
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Fittings and accessories Tile fittings: - Tile-and-a-half tiles - Eaves/tops tiles - External angles 90° (LH & RH) Feature tiles:
- Club
Ridges:
- Clay half round 325
Hips:
- Hip tile 45° - Clay half round 325
Valleys:
- Valley tile 45° - Lead - Fibreglass
See page 112
Roofing systems Dry roof systems: - Ridge - Hip Ventilation systems: See page 128
- Ridge - Eaves - Top abutment - Tile vent - Invisivent
301 Smooth Plain Tile Rustic (70%), Toscana (20%) and Amarant (10%) Mix
11
Plain Tile · Clay
Humber Plain Tile A traditional, cross-cambered, machine made clay plain tile that gives complete design flexibility and is perfect for complex roofs or vertical cladding.
Technical Data
Colours
Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity at max. gauge Cover width 65 155 Profile depth Hanging length Quantity per pallet 265 Battens per m2 Batten size 20 100centres Up to 600 mm rafter Nail size/type forIntenal tiles angles
265
s
H
Roof Vertical 35° 75° 65 mm 38 mm 100 mm 114 mm 265 x 165 mm 265 x 165 mm 60.0 tiles per m2 53.0 tiles per m2 165 mm 165 mm 13 mm 13 mm 245 mm 245 mm 520 520 10 m 8.8 m 38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
65 Natural Red
66 Flanders
69 Tuscan
68 Antique Slate*
90% LH & RH 135%data LH &isRH Unless otherwise stated, based on tiles laid at minimum headlap.
Clay tiles are subject to small variations in size because of drying and firing shrinkage in the manufacturing process. Therefore, before deciding on the batten gauge and cover width, the roof tiler 164 should inspect each batch of tiles to ensure that75 the correct minimum headlap and 75 sidelap are achieved. 105
105
* Available as a fitting to compliment our antique tiles.
105
Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification. 265
247
For a copy of A Guide to Plain Tiling – Including265 Vertical Tiling, by the Roof Tile Association, visit 265 265 www.clayroof.co.uk.
Tile-and-a-half
LH cloaked verge
165
Half tile LH cloaked verge
247
Feature Tiles Club pattern available.
265
265 Club pattern feature tile
Club pattern feature tile-and-a-half tile
164
75 105
265 ® roofspec Half tile RH cloaked verge
12
105
quantspec®
265
fixspec®
RH cloaked verge
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Fittings and accessories Tile fittings:
- Tile-and-a-half tiles - Eaves/tops tiles - External & internal angles (LH & RH)
Feature tiles:
- Club
Ridges:
- Clay half round
Mono ridges:
- Clay half round
Hips:
- Bonnet - Arris - Clay third round - Baby ridge
Valleys:
- Valley tiles - Lead - Fibreglass
See page 114
Roofing systems Dry roof systems:
- Ridge - Hip
Ventilation systems:
- Ridge - Eaves - Top abutment - Invisivent
See page 128
Humber Plain Tile Natural Red
13
Plain Tile · Clay
Village® Plain Tile A natural clay plain tile with varied colour and texture that creates the appearance of an aged roof from new. Its double cambered design adds further character, providing a rustic look that will blend into its surroundings.
Technical Data
265
0
s H H
Colours
Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity 65 at max. gauge 155 Cover width Profile depth Hanging length Quantity per pallet 265 Battens per m2 20 Batten size 100 Up to 600 mm rafter centres Nail size/type for Intenal tiles angles 90% LH & RH
Roof Vertical 35° 75° 65 mm 38 mm 100 mm 114 mm 265 x 165 mm 265 x 165 mm 60.0 tiles per m2 53.0 tiles per m2 165 mm 165 mm 13 mm 13 mm 245 mm 245 mm 520 520 10 m 8.8 m
See also Arcadia Pantile, page 92 70 Reclaimed
38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
135% LH & RH
Unless otherwise stated, data is based on tiles laid at minimum headlap. Clay tiles are subject to small variations in size because of drying and firing shrinkage in the 164 manufacturing process. Therefore, before deciding the roof tiler 75 75 on the batten gauge and cover width, should inspect each batch of tiles to ensure that the correct minimum headlap and sidelap are achieved. 105
105
105
Please go265 to www.roofspec.co.uk to generate your own quantity estimate and roof specification. 265 265 247 For a copy of A Guide to Plain Tiling – Including 265 Vertical Tiling, by the Roof Tile Association, visit
www.clayroof.co.uk.
Tile-and-a-half
LH cloaked verge
165
Half tile LH cloaked verge
247
Feature Tiles Club pattern available.
265
265 Club pattern feature tile
Club pattern feature tile-and-a-half tile
164
75 105
265
roofspec® Half tile RH cloaked verge
14
105
quantspec®
265
fixspec®
RH cloaked verge
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Fittings and accessories Tile fittings: Feature tiles:
- Tile-and-a-half tiles - Eaves/tops tiles - External & internal angles (LH & RH) - Club
Ridges:
- Clay half round
Mono ridges:
- Clay half round
Hips:
- Bonnet - Arris - Clay third round
Valleys:
- Valley tiles - Lead - Fibreglass
See page 114
Roofing systems Ventilation systems:
- Ridge - Eaves - Top abutment - Invisivent
See page 128
Village Plain Tile Reclaimed
15
Plain Tile · Clay
303 Sanded Plain Tile A traditional clay plain tile with a sanded finish, available in a choice of three colours.
Technical Data
Colours
Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m² Batten size - up to 600mm rafter centres Nail size/type for tiles
Roof Vertical 35° 75° 65 mm 38 mm 102.5 mm 116 mm 270 x170 mm 270 x170 mm 57.4 tiles per m² 50.7 tiles per m² 170 mm 170 mm 12 mm 12 mm 254 mm 254 mm 896 896 9.8 m 8.7 m
796 Old Heather
38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
798 Old Rustic
797 Old Weathered
Unless otherwise stated, data is based on tiles laid at minimum headlap. Clay tiles are subject to small variations in size because of drying and firing shrinkage in the manufacturing process. Therefore, before deciding on the batten gauge and cover width, the roof tiler should inspect each batch of tiles to ensure that the correct minimum headlap and sidelap are achieved. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification.
roofspec®
16
quantspec®
fixspec®
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Fittings and accessories Tile fittings: - Tile-and-a-half tiles - Eaves/tops tiles - External angles 90° (LH & RH) Feature tiles:
- Club
Ridges:
- Clay half round
Hips:
- Hip tile 45° - Clay half round
Valleys:
- Valley tile 45° - Lead - Fibreglass
See page 112
Roofing systems Dry roof systems: - Ridge - Hip Ventilation systems:
- Ridge - Eaves - Top abutment - Tile vent - Invisivent
See page 128
303 Sanded Plain Tile Old Rustic (50%) and Old Heather (50%) Mix
17
Plain Tile · Clay
Alban Handcrafted Plain Tile With it's sanded texture, irregular form and rustic tones, the Alban plain tile adds charm and character to any roof.
Technical Data
Colours
Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m2 Batten size Up to 600 mm rafter centres Nail size/type for tiles
Roof Vertical 35° 75° 65 mm 38 mm 100 mm 114 mm 265 x 165 mm 265 x 165 mm 60.0 tiles per m2 53.0 tiles per m2 165 mm 165 mm 13 mm 13 mm 245 mm 245 mm 505 505 10 m 8.8 m
75 Sussex Blend
38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
Unless otherwise stated, data is based on tiles laid at minimum headlap. Clay tiles are subject to small variations in size because of drying and firing shrinkage in the manufacturing process. Therefore, before deciding on the batten gauge and cover width, the roof tiler should inspect each batch of tiles to ensure that the correct minimum headlap and sidelap are achieved. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification. For a copy of A Guide to Plain Tiling – Including Vertical Tiling, by the Roof Tile Association, visit www.clayroof.co.uk.
165
Feature Tiles Club available. 265
roofspec®
18
quantspec®
fixspec®
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Fittings and accessories Tile fittings:
- Tile-and-a-half tiles - Eaves/tops tiles - External & internal angles (LH & RH)
Feature tiles:
- Club
Ridges:
- Clay half round - Handcrafted ridge - Baby ridge
Mono ridges:
- Clay half round
Hips:
- Bonnet - Arris - Clay third round - Handcrafted ridge - Baby ridge
Valleys:
- Valley tiles - Lead - Fibreglass
See page 114
Roofing systems Ventilation systems:
- Ridge - Eaves - Top abutment - Invisivent
See page 128
Alban Sussex Blend
19
Plain Tile · Clay
Barrow Handcrafted Plain Tile A handcrafted clay plain tile with a sanded finish. Each tile has a subtle irregular form which creates the appearance of a traditional, aged roof with character.
Technical Data
Colours
Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m2 Batten size Up to 600 mm rafter centres Nail size/type for tiles
Roof Vertical 35° 75° 65 mm 38 mm 100 mm 114 mm 265 x 165 mm 265 x 165 mm 60.0 tiles per m2 53.0 tiles per m2 165 mm 165 mm 13 mm 13 mm 245 mm 245 mm 508 508 10 m 8.8 m
90 Bay Brown
91 Dark Rusper
38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
92 Burnt Oak
93 Light Rusper
Unless otherwise stated, data is based on tiles laid at minimum headlap. Clay tiles are subject to small variations in size because of drying and firing shrinkage in the manufacturing process. Therefore, before deciding on the batten gauge and cover width, the roof tiler should inspect each batch of tiles to ensure that the correct minimum headlap and sidelap are achieved.
Barrow Brindle Mix is achieved by mixing Bay Brown (50%), Burnt Oak (30%) and Dark Rusper (20%).
Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification. For a copy of A Guide to Plain Tiling – Including Vertical Tiling, by the Roof Tile Association, visit www.clayroof.co.uk.
165
Feature Tiles Club available. 265
roofspec®
20
quantspec®
fixspec®
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Fittings and accessories Tile fittings:
- Tile-and-a-half tiles - Eaves/tops tiles - External & internal angles (LH & RH)
Feature tiles:
- Club
Ridges:
- Clay half round - Handcrafted ridge - Baby ridge
Mono ridges:
- Clay half round
Hips:
- Bonnet - Arris - Clay third round - Handcrafted ridge - Baby ridge
Valleys:
- Valley tiles - Lead - Fibreglass
See page 114
Roofing systems Ventilation systems:
- Ridge - Eaves - Top abutment - Invisivent
See page 128
Barrow Brindle Mix
21
Plain Tile · Keymer Handmade Clay
Keymer Goxhill Tile One of the finest and most distinctive roof coverings available, this handmade plain tile gives a rich textured roofscape that will become more attractive with age.
Colours
Technical Data Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m² Batten size - up to 600mm after centres Nail size/type for tiles
Roof Vertical 40° 75° 65 mm 38 mm 100 mm 114 mm 265 x165 mm 265 x165 mm 60 tiles per m² 53 tiles per m² 165 mm 165 mm 13 mm 13 mm 245 mm 245 mm 560 560 10 m 8.8 m 38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
Unless otherwise stated, data is based on tiles laid at minimum headlap. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification. For a copy of A Guide to Plain Tiling – Including Vertical Tiling, by the Roof Tile Association, visit www.clayroof.co.uk.
96 Dark Red
97 Dark Chestnut
95 Autumn Brown Brindle Mix is achieved by mixing Autumn Brown (50%), Dark Chestnut (30%) and Dark Red (20%).
For Keymer fittings See page 120
22
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Goxhill Brindle Mix
23
Plain Tile · Keymer Handmade Clay
Keymer Shire Tile A genuine handmade British made clay tile that offers a serious alternative to the traditional style of clay roof tiles. Produced in three colours, every tile weathers naturally to look better and improve with every passing year.
Colours
Technical Data Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m² Batten size - up to 600mm after centres Nail size/type for tiles
Roof Vertical 40° 75° 65 mm 38 mm 100 mm 114 mm 265 x165 mm 265 x165 mm 60 tiles per m² 53 tiles per m² 165 mm 165 mm 13 mm 13 mm 245 mm 245 mm 832 832 10 m 8.8 m 38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
77 Priory
78 Heritage
79 Downs Red
Unless otherwise stated, data is based on tiles laid at minimum headlap. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification. For a copy of A Guide to Plain Tiling – Including Vertical Tiling, by the Roof Tile Association, visit www.clayroof.co.uk.
For Keymer fittings See page 121
24
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Keymer Shire
25
Plain Tile · Keymer Handmade Clay
Keymer Traditional Tile Traditional to look at, but innovative in design. They are created for renovation use. These tiles are the ideal choice for the refurbishment of older peg tiled roofs and elevations or for use on oast houses.
Colours
Technical Data Minimum roof pitch Headlap (minimum) Batten spacing at max. gauge Size of tile Covering capacity at max. gauge Cover width Profile depth Hanging length Quantity per pallet Battens per m² Batten size - up to 600mm after centres Nail size/type for tiles
Roof Vertical 40° 75° 65 mm 38 mm 100 mm 114 mm 265 x165 mm 265 x165 mm 60 tiles per m² 53 tiles per m² 165 mm 165 mm 13 mm 13 mm 245 mm 245 mm 768 768 10 m 8.8 m
89 Wealden Red
38 x 25 mm 38 x 25 mm 38 x 3.35 mm aluminium ring shank clout head
88 Antique
87 Elizabethan
Unless otherwise stated, data is based on tiles laid at minimum headlap. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification. For a copy of A Guide to Plain Tiling – Including Vertical Tiling, by the Roof Tile Association, visit www.clayroof.co.uk.
For Keymer fittings See page 121
26
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Keymer Traditional Wealden Red
27
Plain Tile · Keymer Handmade Clay
Keymer Peg Tile Our Keymer Peg tiles are innovative in design. They are created for renovation use, with three nail holes and one nib, to make fitting easier and less disruptive.
Colours
Technical Data County (Single Nib) Kent (Nibless) Minimum roof pitch 40° 40° Headlap (minimum) 60 mm 60 mm Batten spacing at max. gauge 95 mm 95 mm Size of tile 250 x150 mm 250 x150 mm Covering capacity at max. gauge 70 tiles per m² 70 tiles per m² Cover width 150 mm 150 mm Profile depth 13 mm 13 mm Hanging length 230 mm 230 mm Quantity per pallet 830 830 Battens per m² 10.5 m 10.5 m Batten size - up to 600mm after centres 38 x 25 mm 38 x 25 mm Nail size/type for tiles 38 x 3.35 mm Stainless steel or aluminium ring shank oak pegs clout head Unless otherwise stated, data is based on tiles laid at minimum headlap. Please go to www.roofspec.co.uk to generate your own quantity estimate and roof specification. For a copy of A Guide to Plain Tiling – Including Vertical Tiling, by the Roof Tile Association, visit www.clayroof.co.uk.
88 Antique (Kent)
86 97 Weathered Dark (County) Chestnut
County Peg - Weathered Our County peg tiles are innovative in design. They are created for renovation use, with three nail holes and one nib, to make fitting easier and less disruptive. These tiles are the ideal choice for the refurbishment of older peg tiled roofs or for use on oast houses.
Kent Peg - Antique Our Kent peg tiles are handmade by craftsmen using the company’s rich Wealden Clay. They are better and more cost effective than using second hand tiles which can quickly deteriorate once stripped off and re-used.
For Keymer fittings See page 121
28
Customer Support Tel: 0844 9395 900
Fax: 0844 9395 950
Technical Services: 0844 9395 999
Email: sandtoftinfo@wienerberger.com
Keymer Peg Antique
29
Customer Support General enquiries, pricing and orders T 0844 9395 900 F 0844 9395 950 sandtoftinfo@wienerberger.com sandtoftorders@wienerberger.com Technical Services Full range of technical services T 0844 9395 999 F 0844 3344 438 sandtofttechnical@wienerberger.com
Wienerberger Ltd Wienerberger House, Brooks Drive Cheadle Royal Business Park, Cheadle, Cheshire, SK8 3SA www.wienerberger.co.uk Twitter: @wienerbergeruk