Skip to main content

Guide to natural clay paving

Page 1

Landscaping Solutions

A guide to natural clay paving. 2015.


Landscaping Solutions

Piccadilly Place, Manchester

1


Contents

Introduction to Wienerberger

3-4

Sustainability 5-6 Why choose clay Manufacturing sites

7-8 9

Penter In Action University of Roehampton

11-12

The Library of Birmingham

13-14

Telford Shopping Centre

15-16

Dutch Collection Dutch pavers

17-34

German Collection Chamfered pavers

35-38

Baggeridge Collection Baggeridge range

39-42

Specials 43-44 Paving Accessories

45-46

Marker pavers

47

Deterrent pavers

48

Infill, Channel, Step and Ramp pavers

49-50

Kerbs 51-53 Basic Installation & Design Guidance

54-56

Paver Index

57-58

Bath Spa University

2


Introduction

Wienerberger; single focus, thousands of products Founded in 1819, Wienerberger has grown into a world-class provider of wall, roof and landscaping solutions with a global reach. With 204 plants in 30 countries – 14 of them in the UK, 14,800 global employees – we lead the way in new build and renovation markets, offering more than 1,000 products encompassing the complete building envelope.

3

Our product innovation is measured against three key benchmarks: quality of construction, perfection in performance and increasingly, sustainability. All three inform every paver in this brochure, and every product we produce.


4


Sustainability

Wienerberger The sustainability story

For Wienerberger, sustainability is a dynamic and lasting commitment. It has been embedded in our management and culture for as long as we can remember. It’s an approach that will drive us into a greener future. We strive to maximise sustainability without compromising the performance of our products – it’s central to our output worldwide.

5

• Our CO2 emissions are 12.5% lower than the industry average • Our recycled slate tiles were the first roofing products to achieve ‘Excellent’ status under BES 6001 • Our Heckmondwike factory was the first in the UK to achieve carbon neutrality • We are signatories of the British Ceramic Confederation Health and Safety Pledge

• All of our production processes meet the requirements for the Responsible Sourcing of Construction Products throughout the supply chain as defined in the BRE Environmental and Sustainability Standard BES 6001 • Material efficiency improvements at Broomfleet have saved the equivalent of 8,000 tonnes of clay since 2011 • In 2014 the amount of renewable electricity consumed by & exported from Wienerberger sites represented more than half of our total electricity use


Sustainability is at the heart of our paving product range. Our Dutch manufacturing operations meet the requirements of ISO 14001, ISO 9001 and KOMO quality certification systems at national level and use 100% green electricity across all its sites.

Dutch clay: a renewable source The amount of clay extracted annually by the ceramic industry in the Netherlands from the floodplains of their rivers is only a small part of the possible amount of extractable clay and in fact the Dutch rivers naturally deposit more clay than the amount extracted annually*. The company participation in river management and clay winning helps to make the Netherlands resistant to the effect of rising water levels. In Munnikenland, near Castle Loevestein, Wienerberger is involved in the clay extraction and after completion this will result in a river water level reduction of 30 cm for the nearby village of Gorinchem.

Clay is extracted in the close vicinity of the Wienerberger production sites and moved by barge, thereby minimising lorry movements. Like all operations worldwide Wienerberger Netherlands is an active player in its country’s sustainability agenda. The company is a long-term member of the Dutch covenant Multiyear Energy Efficiency (MJA) and a signatory to the Foundation for Climate Friendly Procurement & Entrepreneurship (SKAO). * Michiel J. Vander Meulen et-al, ‘Sediment management and the renewability of flood plain clay for structural ceramics’, J Soils Sediments, Springerlink.com, 2009.

6


Landscaping Solutions

Why choose clay? Used for thousands of years in construction worldwide, clay remains the most efficient, cost effective and sustainable solution for modern buildings.

Its natural properties mean that it is able to provide complete, longterm sustainability, not only offering increasingly sophisticated low-carbon product manufacture, but giving a building life of up to 200 years with little or no maintenance. Clay is strong, durable and builds in sound and temperature-control benefits wherever it’s used – creating the ideal internal living environment. From sustainability credentials and build quality to the ease of use on-site, clay as a material is equipped to meet every demand of modern construction.

7

Wienerberger and clay

The appeal of clay paving

Wienerberger has blended the very latest in manufacturing technology with an established construction heritage. The result is a product portfolio that is unmatched in range and quality.

In commercial scenarios, clay has long been overlooked in favour of cheaper, alternatives like concrete or asphalt. However, it’s worth remembering that cost doesn’t equal value. The naturally sustainable qualities of clay make it the perfect material for pavers. Once installed, clay pavers are easy to maintain, and with a lifecycle of over 200 years, the upfront price of clay pavers represents serious value for money.

Every single paver, from first to last, has been designed to convey our passion for the material; created to give our customers the highest quality, the best price and the widest choice. Our products represent the best of clay, and the best of building.

Give your project sustainability that will last the distance with Penter.


8


Landscaping Solutions

Paver Manufacturing Sites

Kingsbury, England

Netherlands

Germany

9


Roehampton University

10


Landscaping Solutions

Penter in action

The Yard, University of Roehampton, London Learningscape

Client: University of Roehampton Architect: Henley Halebrown Rorrison Pavers used: Herne Dark Brindled Slimpave Paved area: 1,600m2

The Yard forms a central part of the master plan for the University of Roehampton. The project replaces an old trades yard and workshops at the heart of the campus, with a new public space that links Froebel and Digby Stuart Colleges, which were once separated by a boundary wall. The scheme creates a single paverlined space. Clay bricks and pavers were chosen to unify the old and the new, for surface, structure and skin, and to achieve a consistency through the range of different conditions and details, including conservation and repair. Furthermore, The Yard, capitalises on the eccentric building remains and ground conditions revealed by the demolition of the workshops. The design

11

harnesses these eccentricities to reduce environmental waste. New structural openings have been made to open the chapel and an existing cafĂŠ up to the Yard. The historic boundary wall has been reduced in height and buttressed within the Yard to make it structurally sound. New flat brick arches have been introduced and openings formed to link the Yard to the historic Froebel garden and the Courts. To the north a new covered walk way has been carved out of an existing building. Clever detailing and design has allowed the paver to be used in the new brickwork and surrounding walls, taking the aesthetics of the product into the vertical from the horizontal.


The impression of solidity in the paver is honestly revealed in the free standing flemish-bond bench walls, whilst the one-third stretcher bond brick skins are used as building envelopes drawn over existing walls left exposed from the demolition works. The paving is laid in a variety of bonds including one-third stretcher, stack and herringbone. Niche benches built into the walls and copings are cast and etched reconstituted stone. Their pigment, similar to that of the lime-wash for the historic boundary wall, has been derived from grinding up samples of the new pavers from site. The paver, which has also been used as a brick is unique in the UK. It is

thin - 210mm x 48mm x 70mm. It is waterstruck which gives it a rough quality. The colour varies: the clay when fired turns purple, silver, brown and red. In the large, uninterrupted brick-paved areas, these silver pavers form eyecatching elements and enliven the hard bricklaying. The depth of jointing is also varied: in structural walls it is recessed, for bench back-rests it is flush, whilst paving joints are tightly sanded or laid in a matrix of pea gravel to promote the growth of vegetation. By using 12mm bedding joints, 5 courses of new brickwork corresponds exactly with 4 courses of the standard bricks of the existing walls, giving rise to a playful mini dialogue of scale. Lime forms part of the light

black brown mortar within to eliminate expansion joints. The Yard creates a new intersection at the heart of the campus, a place for people to meet and work, and a place for events. These particular pavers offered scope for expression because of their nonstandardised dimensions and their varied range of surface finishes, textures and colours.

12


Landscaping Solutions

Penter in action

The Library of Birmingham, Birmingham

Publicscape Case study available to view www.wienerberger.co.uk/ landscapes/case-studies

Shortlisted for the BDA Awards Best Outdoor Space

13

Client: The Library of Birmingham, The redesign of Centenary Square Architect: Mecanoo Pavers used: Dragfaced Chamfered Blue, Multi Brindled, Essen Red, Hannover Buff Brindled. Paved area: 3,600m2 From the moment that it was unveiled in September 2013, the unique architectural design of The Library of Birmingham has captured the imagination of the British public. Wienerberger, the leading supplier of wall, roof and landscaping innovations, was chosen to provide clay pavers to the project, which has transformed Centenary Square, the largest public square in the heart of Birmingham. However, such a task was not as straightforward as it might initially sound. It wasn’t simply a matter of choosing paving to suit the practical needs of the area, but a process that had to carefully consider a whole gamut of geographic, architectural and historical requirements. For example, there was a very clear requirement for the paving to provide Centenary Square with a sense of coherence; to provide a physical

and symbolic link between the bold, unapologetically modernist external appearance of the library itself and the proud architectural heritage of the region; the Victorian red clay brick and terracotta building stock that quickly became synonymous with the inner-city Birmingham of centuries past. Of course, despite its shiny modern appearance, the Library itself, in both material and structure, has been cleverly designed to offer subtle references to the past – albeit in a way that is ostentatiously futuristic. The founder of the Dutch architectural practice Mecanoo, Francine Houben, commented that the £189 million project that she helped create, wears its filigree skin of metal loops as a ‘motif’ of the city: ‘The façade recalls the industrial gasometres as well as the history of the jewellery trade here’.


That said, these striking rings also give the building a significant dose of something less traditional on major public buildings, and more common behind the fortified glass of the city’s specialised retail quarter: bling. As such, the sense that the project creates, perhaps more than anything else, is a deeply satisfying feeling of juxtaposition as familiar materials are expressed in unfamiliar ways. With this in mind it was crucial that the paving in Centenary Square was able to maintain this delicate aesthetic balance. In order to do so, the style of pavers chosen needed to mesh with the design of the square into three distinct realms: monumental, cultural and entertainment. Like the material choices on the library, these palazzos illustrate important periods in the history of the city, and accentuate an artisan tradition within a famously

industrial region. Wienerberger’s Dragfaced Chamfered Blue and Multi Brindled pavers were selected along with the Essen Red and the Hannover Buff Brindled paver to create what Mecanoo calls the ‘red line’ to lead pedestrians into Centenary Square. The Penter range of chamfered pavers is renowned for its durability and distinctive colour selection, making it ideal for creating designs that harmonise and accentuate the landscape. The Dragfaced Chamfered Blue and Multi Brindled pavers are produced from Wienerberger’s clay reserves at its renowned Kingsbury factory, while Baggeridge pavers are well known for their vibrant colours and unique deep blues, as well as being able to withstand demanding application. The Essen Red and the Hannover Buff Brindled are traditional rectangular clay pavers, which are both practical and versatile.

Aside from the practicality and durability of these particular pavers, the colours have also been carefully selected to match, contrast and cohere with the building (and indeed the surrounding area). Combined with the different paver surface finishes, and the variation of bond including stretcher and herringbone, the intention was to maintain a vivid sense of textural depth. Naturally, the aluminium rings of the library represent a pronounced aesthetic texture, and the intention was to mirror this impact across the Centenary Square palazzos so that as the eye is drawn down from the top of the structure, the paving visual will continue to deliver impact and intrigue.

14


Landscaping Solutions

Penter in action

Telford Shopping Centre, Telford

Publicscape Case study available to view www.wienerberger.co.uk/ landscapes/case-studies

15

Client: Telford and Wrekin Council Architect: Barton Willmore and Gillespies Architects Pavers used: Dutch Clay (Sienna, Auraton, Mastiek) Paved area: 1,500m2

The first phase of Telford’s groundbreaking Southwater development has been completed. The unveiling of the gold-clad Telford & Wrekin Council building signals the start of the £250million investment in the Shropshire town. The project – situated on green belt, waterside land - represented a serious aesthetic challenge for the developers at Morgan Sindall. Careful selection of building materials was of paramount importance to the design and Wienerberger was chosen to provide clay pavers.

There was a clear requirement for the paving to provide Southwater One with a physical and symbolic link between the bold, unapologetically modernist external appearance of the development and its natural surroundings. The Sienna (Hague Cream) pavers addressed that specification; the warm, sandy, tones blending with the surrounding natural landscape on the waterfront. In addition, the use of Wienerberger’s Mastiek and Auraton pavers, with their clean grey finishes, created a crisp patina to the heart of the scheme: ‘the library’.


The finished development is intended to create an exciting commercial space, while also providing a sense of tranquillity and solidity. The use of clay paving has helped to realise this, with its natural durability addressing the latter, while the laying pattern and colouration contribute to the former. With both the rigid Stretcher pattern and the more sporadic Herringbone technique being employed, the retailscape is afforded both consistency and variety.

Keith Barker, Commercial Director at Wienerberger, commented: “This was a scheme with a great deal of considerations, from material performance and local environment, right down to the smallest design spec - but it’s that sort of attention to detail that defined this project, and made it something that we were so very keen to contribute to.”

Ultimately, the project’s architectural ambition promises to provide a high functioning retailscape from which Telford can develop its business, retail, commerce and public facilities. Southwater One stands as a testament to the vision of urban planners, and the intelligent application of building materials and techniques.

16


Landscaping Solutions

Dutch Pavers

Dutch Pavers

Wienerberger has created its Dutch collection to achieve a new and unique look in larger areas of urban paving. Wienerberger’s mixed reds, creams, greys and waterstruck blends offer designers a wider choice and scope when designing new landscapes. Versatile & authentic Wienerberger offers a wide choice of high quality, durable and permanently beautiful street clay pavers. Discover the versatility of the range of pavers, get inspired for your next landscaping project and see what fits your outdoor paving needs.

17


Dutch Pavers

Bath Spa University

Standard Dimensions

Dutch Paver WF

Dutch Paver DF

Dutch Tumbled Paver LF

18


Landscaping Solutions

Dutch Pavers

Buff/Buff Multi

Telford: Southwater one - Sienna

19

Buff/Buff Multi


Dutch Pavers

Sienna (Zandgeel) - Hague Cream WF

Buff/Buff Multi

Sienna (Zandgeel) - Hague Cream DF

Telford: Southwater one - Sienna

20


Landscaping Solutions

Altrincham Central Way, Auraton, supplied by Hardscape

21


Dutch Pavers

Buff/Buff Multi

Zonnebloem Wasserstrich (Tilberg Blended Ochre) WF

Zonnebloem Wasserstrich (Tilberg Blended Ochre) DF

Auraton WF

Auraton DF

Euroton Varia WF

Euroton Varia DF

22


Landscaping Solutions

Dutch Pavers

Solid Red

Bruno (Rood-Bruin) WF

Bruno (Rood-Bruin) DF

Viola (Rood) WF

Viola (Rood) DF

Bruno Wasserstrich (Delft Dark Blend) WF

Bruno Wasserstrich (Delft Dark Blend) DF

Paviona (Arnhem Red) LF

Paviona (Arnhem Red) WF

Paviona (Arnhem Red) DF

23


Dutch Pavers

Red Multi

Novoton WF

Novoton DF

Orion UWF

Orion UDF

Rosa Wasserstrich WF

Rosa Wasserstrich DF

Euroton Novoton WF

Euroton Novoton DF

Padova LF

24


Landscaping Solutions

Dutch Pavers

Padova (Eindhoven Mixed Red) WF

25

Red Multi

Padova (Eindhoven Mixed Red) DF


Dutch Pavers

Brown Multi

Mastiek Wasserstrich WF

Mastiek Wasserstrich DF

Mastiek LF

Mastiek WF

Mastiek DF

Oliva Wasserstrich WF

Oliva Wasserstrich DF

Oliva WF

Oliva DF

26


Landscaping Solutions

Dutch Pavers

Brown Multi

Dione UWF

Dione UDF

Incana Wasserstrich DF

Gala Wasserstrich (Paars-Blauw) WF

Gala Wasserstrich (Paars-Blauw) DF

Porto WF

Porto DF

Incana Wasserstrich WF

27


Dutch Pavers

Triton UWF

Greys and Blacks

Triton UDF

Bassalt WF

Bassalt DF

28


Landscaping Solutions

Dutch Pavers

Greys and Blacks

Omber WF

Omber DF

Atlas UWF

Astra UWF

Astra UDF

Caron UDF

29


Dutch Pavers

Greys and Blacks

Nero Wasserstrich WF

Nero Wasserstrich DF

Nero DF

Reno UDF

Nero WF

30


Landscaping Solutions

Dutch Pavers

Tumbled

Tumbled

The characteristic features of the ‘Old Holland’ range include a tumbled edge with sanded or waterstruck textures. The range is available in tones of reds, browns, lighter greys and buff pastel shades to blend perfectly within a variety of surroundings.

Astra UWF Tumbled

31


Dutch Pavers

Tumbled

Astra UWF Tumbled

Atlas UWF Tumbled

Orion UWF Tumbled

Triton UWF Tumbled

Dione UWF Tumbled

32


Landscaping Solutions

Dutch Pavers

Tegel 200x200

33

200 x 200

Tegel


Dutch Pavers

Astra Tegel

200 x 200

Orion Tegel

Bruno Tegel Tegel

Caron Tegel

Masteik Tegel

34


Landscaping Solutions

Chamfered

Chamfered

The traditional rectangular clay paver is both practical and versatile. The Penter range of chamfered pavers is renowned for its durability and distinctive colour selection, making it ideal for creating designs which harmonise or accentuate the landscape.

Olympic Village, Barcelona, Spain - Essen Red

35


Chamfered

Bochum Orange Multi

Bremen Brown

Dortmund Dark Multi

Essen Red

Hamburg Buff Multi

Hannover Buff Brindled

Chamfered Paver

Munster Red Brindled

36


Landscaping Solutions

Waterstruck Slim Pave

Waterstruck Slim Pave

37


Waterstruck Slim Pave

Bonn Golden Multi

Herne Dark Brindled

Koln Red Multi

Juist

38


Landscaping Solutions

Chamfered

Baggeridge

Barton Marina Vintage Tumbled Blue Brindled

39

Baggeridge


Chamfered

Dragfaced Chamfered Blue

Baggeridge

Dragfaced Square Edged Blue

Dragfaced Chamfered Multi Brindled

40


Landscaping Solutions

Cobbles

Baggeridge

Ideal for creating a more traditional rustic, worn and weathered appearance, Baggeridge cobbles are ideal for both domestic and commercial applications. Reflecting the industrial heritage of the UK, Baggeridge Vintage Tumbled Blue Brindle provides an ideal alternative to the more modern chamfered and square edged pavers when an older, more established and rustic appearance is required.

Barton Turns Marina, Burton On Trent Dragfaced Cobbles Square Edged Red

41


Dragfaced Cobbles* Square Edged Blue

Dragfaced Cobbles* Tumbled Blue

Smooth Chamfered Blue

Vintage Tumbled Blue Brindled

*Baggeridge cobbles have been designed to be split on site

42


Landscaping Solutions

Specials

Patterned

Specials

Available in a wide variety of sizes, finishes and formats, Baggeridge Blue and Red pavers are famed for their durability, hard wearing surface and true blue colour – unique to the clay source used in their manufacture. With proven performance from centuries of use throughout the UK and Europe, they are suitable for the most demanding of applications.

Plaza, Germany Baggeridge Smooth Chamfered Blue in combination with Baggeridge Diamond Pattern Blue

43


Diamond Pattern Red

Diamond Pattern Blue

Standard Dimensions

Smooth Stable Blue Patterned

Square Pattern Blue

*Baggeridge cobbles have been designed to be split on site

41

44


Landscaping Solutions

Paver Accessories

Add to the aesthetic appeal of a paved surface Wienerberger supplies a full range of paving accessories to enhance a commercial design scheme both aesthetically and functionally. Products are manufactured to the same high standards as Wienerberger’s core paving products, consistent in strength, durability and appearance.

Wide Range A variety of contrasting and complementary colours are available in a range that includes: Deterrent Pavers, Tactile Pavers, Infill Units, Channel Units, Step Units and units for various kerb types. Wienerberger also provides Ramp Systems, ideal for traffic calming. Purpose Made Specials With early involvement in design and specification, Wienerberger can supply bespoke products for any purpose. Please contact the Design Services Department for advice, on 0161 491 8200.

45

Availability Wienerberger holds stock of a wide variety of paver accessories, but we advise that paver accessories may be on extended delivery during periods of high demand. It is advisable to order any paver accessories as early as possible to ensure they can be supplied to meet site installation and construction programmes.


Specials

Corduroy Paver T.3

D.E.T.R Blister Paver T.1

Directional Guidance Paver T.6

Available in red, blue and buff

Lozenge Platform Edge Paver T.11

Blister Platform Edge Paver T.10

T.7 Directional Guidance Paver Stop End

T.8 Directional Guidance Paver Intermediate

TACTILE PAVERS - DIMENSIONS (mm)

Code

Type

T.1

D.E.T.R. Blister Paver

T.3

A

B

C

D

R

200 133

65

-

-

Corduroy Paver

200 100

65

-

-

T.4

Corduroy Paver - Stop End

200 100

65

-

-

T.5

Corduroy Paver - Half Stop End

100 100

65

-

-

T.6

Directional Guidance Paver

200 160

65

-

-

T.7

Directional Guidance Paver - Stop End

200 160

65

-

-

T.8

Directional Guidance Paver - Intermediate

200 160

65

-

-

T.9

Directional Guidance Paver - Half Stop End

100 160

65

-

-

T.10

Blister Platform Edge Paver

200 133

65

-

-

T.11

Lozenge Platform Edge Paver

200 133

65

-

-

T.12

Lozenge Platform Edge Paver - Half

100 133

65

-

-

T.13

Lozenge Platform Edge Paver - Intermediate

200 133

65

-

-

T.1 D.E.T.R. Blister Paver

T.9 Directional Guidance Paver Half Stop End

T.3 Corduroy Paver

T.10 Blister Platform Edge Paver

T.4 Corduroy Paver Stop End

T.11 Lozenge Platform Edge Paver

T.5 Corduroy Paver Half Stop End

T.12 Lozenge Platform Edge Paver - Half

T.6 Directional Guidance Paver

T.13 Lozenge Platform Edge Paver Intermediate

46


Landscaping Solutions

Marker Pavers

Marker pavers are standard paving units that have been developed by Wienerberger for use in a wide range of applications, including: indicating traffic restrictions, marking car bays, and where the use of naturally contrasting paver colours is not permitted. These units are factory coated in yellow or white and treated with an anti-skid dressing. To support the visually impaired, specially designed Step Marker Pavers provide a means of highlighting step nosings and are available in red or blue to complement paving and supplied for on-site application of infill grout by the contractor.

Yellow Marker Paver - Chamfered M.2

M.1/M.2 Marker Paver* Square Edged or Chamfered

M.3 Step Marker Supplied ready for on-site grouting

* The life of the coating will depend upon conditions of use

Typical application: • Highways • Car Parks White Marker Blocks:

Step Marker Paver M.3

Suitable for: • Trafficked Highways • Definition or Parking Bays • Locations where high visibility indicators are required

47

MARKER PAVERS - DIMENSIONS (mm) Code

Type

A

B

C

D

R

M.1

Marker Paver* - Square-edged

200

100

65

-

-

M.2

Marker Paver* - Chamfered

200

100

65

-

-

M.3

Step Marker Paver

215

102

65

55

25


Deterrent Pavers

Offering various levels of deterrence to restrict or prevent use by pedestrians, bicycles and supermarket trolleys or to discourage vehicle over-run, Deterrent Pavers are generally laid with alternating rows, or larger areas of standard pavers. They can also contribute to the overall aesthetic impact of a scheme through the contrast of light and shade afforded by their profiles, coupled with the use of colour. Note: In the interests of user safety, careful consideration should be given to the design and location of deterrent features.

Slip-top Deterrent Paver D.1

Available in red, blue and buff

Stretcher Ridged Deterrent Paver and Header Ridged Deterrent Paver D.4 & D.3

Sharp-top Deterrent Paver D.2

D.1 Slip-top Deterrent Paver

D.3 Header Ridged Deterrent Paver

D.2 Sharp-top Deterrent Paver

D.4 Stretcher Ridged Deterrent Paver

DETERRENT PAVERS - DIMENSIONS (mm)

A

B

C

D

E

Type

D.1

Slip-top Deterrent Paver

200 102 150

-

51

-

D.2

Sharp-top Deterrent Paver

200 102 114

83

150 -

-

45Âş

D.3

Header Ridged Deterrent Paver

200 100

65

25

50 25

-

-

D.4

Stretcher Ridged Deterrent Paver

200 100

65

25

50 25

-

-

-

F

Îą

Code

-

R

48


Landscaping Solutions

Infill, Channel, Step and Ramp Pavers Infill Units Offering a neat finish whilst minimising on-site cutting of small pieces, Infill Units are positioned adjacent to edge restraints or obstructions in a flexibly constructed pavement. They are normally available in blues and reds, with smooth or dragfaced surface textures to complement our full range of pavers.

I.1.1/I.1.2 Triangle

I.2.1/I.2.2 Small Square

I.3.1/I.3.2 Large Square

I.4.1/I.4.2 Obstruction Surround (Designed for rigid laying)

Channel Units

C.2 Channel Stop End

C.3 Channel Corner

Typically used to direct surface water run-off to suitable outlets, these Channel Units feature a dished profile, which is compatible with popular dished gully outlets.

C.4 Channel T-Junction

C.5 Radius Channel

Step Units These Nosing Units feature rounded leading edges to minimise chipping in normal use, whilst Riser/Tread make-up units are faced on two headers, one stretcher and one bed face. As a means of highlighting step nosings to assist the visually impaired, Tactile Pavers for use adjacent to flights of steps and Step Markers, which provide a means of highlighting step nosings, are also available.

S.1 Header Nosing

S.2 Stretcher Nosing

S.3 Corner Nosing

S.4 Riser/Tread Make-up

Ramp Systems Ideal for use in traffic calming applications these Ramp Systems are designed for rigid construction and are available in standard profiles as shown. We are also pleased to assist with purpose-designed ramps for specific projects.

RS.3 Road Ramp Transition Set

RS.I Road Ramp Set

Available in red, blue and buff

RS.2 Road Ramp Crossover Kerb

49

Purpose-made Special Transition Set (manufactured to suit individual requirements)


Infill, Channel, Step and Ramp Pavers

Infill Units - dimensions (mm) Code

Type

Edge Detail

A

B

C

D

E

D

I.4

α

R

I.1.1

Triangle

Square-edged

187

187

65

264

-

-

-

45º

I.1.2

Triangle

Chamfered

187

187

65

264

-

-

-

45º

I.2.1

Small Square

Square-edged

96

96

65

-

-

-

-

-

I.2.2

Small Square

Chamfered

96

96

65

-

-

-

-

-

I.3.1

Large Square

Square-edged

196

196

65

-

-

-

-

-

-

-

I.3.2

Large Square

Chamfered

196

196

65

-

-

I.4.1

Obstruction Surround

Square-edged

194

194

65

-

-

varies to order

-

I.4.2

Obstruction Surround

Chamfered

194

194

65

-

-

varies to order

-

I.2

-

I.3

I.1

The radius on Obstruction Surrounds should not exceed 140mm and should be specified 10mm larger than the obstruction radius. Non-circular Obstruction Surrounds are available to order. Infill units are available either square-edged or chamfered.

CHANNEL UNITS - dimensions (mm) Code

Type

A

B

C

D

E

I.R. Internal Radius

C.100 Channel

200

100

65

12

20

-

-

C.2

200

200

65

-

-

-

-

Channel Stop End

C.2

Approx No. per ¼ Circle

C.3

Channel Corner

200

200

65

-

-

-

-

C.4

Channel T-Junction

200

200

65

-

-

-

-

C.5.1

Radius Channel

200

61

65

90

-

500

11

C.5.2

Radius Channel

200

74

65

90

-

1000

19

C.5.3

Radius Channel

200

78

65

90

-

1500

27

C.5.4

Radius Channel

200

81

65

90

-

2000

35

C.5.5

Radius Channel

200

82

65

90

-

2500

43

C.5

C.4 C.3

C.100

Infill Units - dimensions (mm) Code

Type

S.1

Header Nosing

A

B

C

R

215

102

65

25

S.2

Stretcher Nosing

xx

xx

65

25

S.3.1

Corner Nosing

215

102

65

25

S.3.2

Corner Nosing

215

215

65

25

S.4

Riser/Tread Make-up

215

102

65

-

S.2

S.4 S.1

S.3.1 is available left or right handed, S.3.2 is not handed, S.4 is faced on two headers, 1 stretcher and 1 bed.

S.3 Standard

Purpose Designed Contrasting pavers or Marker pavers M.1/M.2

RS.2

Square-edged pavers laid to the required gradient RS.I RS.3

Purpose-made Special Transition Set

50


Landscaping Solutions

Kerbs Kerb Units Adding visual definition to an area, kerbs in a paving scheme perform a number of functions including creating edge restraint details, delineating areas for vehicular and pedestrian use, and deterring over-riding by vehicles. Allowing kerbs to be constructed to suit the demands of anticipated levels and types of traffic, while maintaining the aesthetic coherence of a scheme, Kerb Units are offered in a choice of profile and depth of upstand, with units to achieve crossovers, corners and radii.

K.800 Boot Kerb

K.9 Boot Kerb Internal Corner Right Hand

K.11 Internal Radius Boot Kerb

K.12 External Radius Boot Kerb

K.13 Boot Drop Kerb Set

(left & right hand)

K.15 (left & right hand) Boot to Crossover Transition

Boot, Cant & Bullnose Kerbs The Boot Kerb should be laid in a vertical orientation for heavily trafficked areas, although it can also be laid horizontally for use in lightly trafficked areas. The units may also act as a transition between paving and brickwork, with brickwork being built directly on them. Cant and Bullnose Kerbs are only suitable for very lightly trafficked areas. Purpose made returns and drop sets are available to order.

51

BN.1 Single Bullnose

BN.8 Single Bullnose Internal Return On End

AN.5 Single Cant

SD.2 Single Cant Internal Return On End


Kerbs Crossover Kerbs Typically used to facilitate access for vehicular or other wheeled traffic where the general run of kerbing is an upstand kerb, the Crossover Kerb may also be used as a kerb in its own right. Alternative angles of slope are available to order.

K.1400 Crossover Kerb

K.10 Boot Kerb External Corner

boot, cant, bullnose kerbs & crossover kerbs - dimensions (mm)

K.16 (left & right hand) Boot to Half Batter Kerb Transition

K.22 Single Bullnose External Return On End

SD.3 Single Cant External Return On End

A

B

C

D

E

F

R

Radius I.R./E.R.

Approx No. per ¼ Circle

α

Boot Kerb

200

100

125

65

103

-

50

-

-

-

Boot Kerb Internal Corner

200

200

125

65

103

-

-

-

-

-

K.10

Boot Kerb External Corner

200

200

125

65

103

-

-

-

-

-

K.11.1

Boot Kerb Internal Radius

200

61

125

90

-

-

-

500

11

-

K.11.2

Boot Kerb Internal Radius

200

74

125

90

-

-

-

1000

19

-

K.11.3

Boot Kerb Internal Radius

200

78

125

90

-

-

-

1500

27

-

K.11.4

Boot Kerb Internal Radius

200

81

125

90

-

-

-

2000

35

-

K.11.5

Boot Kerb Internal Radius

200

83

125

90

-

-

-

2500

43

-

K.12.1

Boot Kerb External Radius

200

90

125

49

-

-

-

500

8

-

K.12.2

Boot Kerb External Radius

200

90

125

70

-

-

-

1000

16

-

K.12.3

Boot Kerb External Radius

200

90

125

77

-

-

-

1500

24

-

K.12.4

Boot Kerb External Radius

200

90

125

80

-

-

-

2000

32

-

K.12.5

Boot Kerb External Radius

200

90

125

82

-

-

-

2500

39

-

K.13

Boot Drop Kerb Set

200

430

125

65

100

-

-

-

-

-

K.1400

Crossover Kerb

200

100

125

65

-

-

-

-

-

17º

K.15

Boot to Crossover Transition

200

200

125

65

-

-

-

-

-

-

K.16

Boot to Half Batter Kerb Transition

430

200

170

125

100

125

-

-

-

-

AN.5.1

Single Cant

215

102

65

46

159

-

-

-

-

-

AN.5.2

Single Cant

215

102

65

60

173

-

-

-

-

-

SD.2.1

Single Cant internal return on end

215

102

102

46

159

-

-

-

-

-

SD.2.2

Single Cant internal return on end

215

102

102

60

173

-

-

-

-

-

SD.3.1

Single Cant external return on end

215

102

102

46

159

-

-

-

-

-

SD.3.2

Single Cant external return on end

215

102

102

60

173

-

-

-

-

-

BN.1.1

Single Bullnose

215

102

65

-

-

-

25

-

-

-

BN.1.2

Single Bullnose

215

102

65

-

-

-

51

-

-

-

BN.8.1

Single Bullnose Internal Return On End

215

102

102

-

-

-

25

-

-

-

BN.8.2

Single Bullnose Internal Return On End

215

102

102

-

-

-

51

-

-

-

K.22.1

Single Bullnose External Return On End

215

102

102

-

-

-

25

-

-

-

K.22.2

Single Bullnose External Return On End

Code

Type

K.800 K.9

215

102

102

-

-

-

51

-

-

-

K.23.10 Dual Purpose Kerb

100

150

65

35

95

-

-

25

-

45

K.23.20 Dual Purpose Kerb

200

150

65

35

95

-

-

25

-

45

K.24

130

130

100

58

88

-

-

25

-

45

Dual Purpose Kerb

52


Landscaping Solutions

Half Batter Kerbs The Half Batter Kerb is intended for vertical installation but may also be laid horizontally depending on the depth of upstand and visual appearance required. In such cases, purpose-made returns and drop sets are available to order.

K.2 Half Batter Kerb Internal Corner

K.100 Half Batter Kerb

Left Hand

K.3 Half Batter Kerb External Corner

K.4 Internal Radius Half Batter Kerb

K.5 External Radius Half Batter Kerb

K.6 (left & right hand) Half Batter Drop Kerb Set

Flush Kerbs

HALF BATTER AND FLUSH kerbs - dimensions (mm) A

B

C

D

E

F

R

Radius I.R./E.R.

Approx No. per ¼ Circle

α

Half Batter Kerb

125

100

200

100

-

18

-

-

76˚

-

K.2

Half Batter Kerb Internal Corner

125

125

200

-

-

-

-

-

-

-

K.3

Half Batter Kerb External Corner

125

125

200

-

-

-

-

-

-

-

K.4.1

Half Batter Kerb Internal Radius

125

68

200

88

-

-

500

10

-

-

K.4.2

Half Batter Kerb Internal Radius

125

77

200

88

-

-

1000

18

-

-

K.4.3

Half Batter Kerb Internal Radius

125

74

200

81

-

-

1500

28

-

-

K.4.4

Half Batter Kerb Internal Radius

125

75

200

80

-

-

2000

37

-

-

K.4.5

Half Batter Kerb Internal Radius

125

75

200

80

-

-

2500

46

-

-

K.5.1

Half Batter Kerb External Radius

125

77

200

55

-

-

500

9

-

-

K.5.2

Half Batter Kerb External Radius

125

82

200

71

-

-

1000

17

-

-

K.5.3

Half Batter Kerb External Radius

125

74

200

67

-

-

1500

28

-

-

K.5.4

Half Batter Kerb External Radius

125

75

200

70

-

-

2000

37

-

-

K.5.5

Half Batter Kerb External Radius

125

75

200

71

-

-

2500

46

-

-

K.6

Half Batter Drop Kerb Set

125

650

200

100

100

-

-

-

-

-

K.7

Flush Kerb

125

100

100

-

-

-

-

-

-

17º

Code

Type

K.100

53

Typically used at a drop kerb position in conjunction with a Half Batter Drop Kerb Set, the Flush Kerb may also be used as a kerb or edging in its own right.

K.7 Flush Kerb


Basic Installation & Design Guidance

Mechanical lay and installation, The Netherlands Technical Characteristics and Properties to BS EN 1344 : 2002. Individual product information available in Paver Index. Laying The sub-grade and the sub-base. The sub-grade should be prepared to the engineer’s required specification and the sub-base should normally be a well compacted Type 1 to the designed thickness taking into account traffic loadings and suitability of the subgrade.

1. Surface course 2. Laying course 3. Road-base 4. Sub-base 5. Subgrade

Edge restraint It is imperative that solid edge restraints are provided along the perimeter of all paved areas to restrict lateral movement (creep) resulting from the action of deceleration and turning forces. They should be adequate to prevent the escape of the bedding course material beneath the paver surface. Cutting clay paving Clay paving should be cut using a multi bladed mechanical paver splitter or bench mounted water cooled power saw to achieve the best finish. Clay paving should not be cut to less than a quarter of the original size along the length of the paver and never cut across the width – when required complimentary fittings and inboard cutting should be used.

Successful detailing

Laying pattern at edge Soldier course

Detailing around manhole Soldier course

Laying pattern at edge Double stretcher course

Detailing around manhole Double stretcher course

Drainage Sufficient cross-fall should be provided to prevent standing water on all block paved surfaces. Unpacking the pavers In order to obtain the correct blend of colour, mix from a minimum of 3 packs. The paver packs require unpacking vertically - not horizontally, layer-by-layer. This will equally distribute minor size variations of the pavers over the entire pavement, and will help to maintain the correct bond pattern. Damaged or broken pavers must not be used although they can be used as cut pieces for infilling. Bedding course and paving Bedding course material should be washed naturally occurring silica sand and should be selected in accordance with the recommendations given in BS7533 : Part 3 : 2005 – Code of Practice for Laying Precast Concrete Paving Blocks and Clay Pavers for Flexible Pavements. Bedding sand is both the strength and weakness of a flexible clay pavement as it provides the interlock that ensures that pavers can accommodate extreme loading. Bedding course material to be 25-40mm compacted thickness over the specified thickness of sub base. The use of a geotextile below bedding course to prevent migration of sand may be advisable if the sub-base is open textured.

Pavers should be laid in the designated bond pattern working from an edge restraint or existing laying face edge. Mechanical force should not be used to bring pavers into intimate contact and should be laid such that a joint width of 2 to 5mm forms between each paver with a target joint width of 3mm thus ensuring there is no point contact between units. The laying of any clay paver, with or without nibs, will require the opening or closing up of joints to maintain good lines throughout the work due to the tolerances of a natural clay product. Compaction of pavers When a sufficient area of pavers has been laid - and before starting the vibration - a fine kiln dried silica jointing sand must be brushed into the joints. The pavers are compacted onto the sand bed using a vibrating plate compactor with a rubber sole-plate to any avoid damage to the surface. After compaction, any damaged pavers must be immediately removed and replaced. Any unevenness or differences in height must be re-adjusted. Joint-filling After compaction, a further application of fine kiln dried silica sand is brushed into the joints until all joints are entirely full. Failure to ensure joints are full before opening up the area to traffic may cause movement and loosening of the paved surface. Upon satisfactory completion traffic may be permitted to use the pavement. Do not use high powered suction cleaners on newly laid areas of flexible paving. Maintenance Wienerberger clay pavers are resistant to chemicals and cleaning fluids. Pavements using clay pavers can be cleaned using biodegradable detergents. Mechanical or high water pressure cleansing operations will require re-sanding of the joints. For further information please contact the Wienerberger design services team.

54


Landscaping Solutions

Basic Installation & Design Guidance

Laying Patterns and Technical Guidance

The design laying pattern is fundamental to the process to the successful laying of clay paving. Due to the natural characteristics of clay paving, manufacturing EE HERRINGBONE tolerances may not permit BASKETWEAVE the achievement of perfectly straightRUNNING lines. BOND Joints can be re-aligned through the use of string lines and infill units can be incorporated as the pattern develops. Suggested patterns -

90 DEGREE HERRINGBONE

Herringbone 45 degree – Commercial 45 DEGREE HERRINGBONE

45 DEGREE HERRINGBONE ASKETWEAVE

EE HERRINGBONE

Herringbone 90 degree – Commercial 90 DEGREE HERRINGBONE BASKETWEAVE

45 DEGREE HERRINGBONE

Basket weave (2 face and 3 face) – pedestrian BASKETWEAVE RUNNING BOND

Staggered bond – pedestrian RUNNING BOND

BASKETWEAVE

RUNNING BOND

Running bond course – Pedestrian

STACK BOND

RUNNING BO

RANDOM RUNNING BOND

Chevron

90 DEGREE HERRINGBONE BASKETWEA 45 DEGREE RUNNING BOND HERRINGBONE STACK BOND

RUNNING BOND

Double Herringbone RANDOM RUNNING BOND

45 DEGREE HERRINGBONE RANDOM RUNNING BONDRUNNING BOND 45 DEGREE DOUBLE HERRINGBONE RANDOM RUNNIN UNNING BOND

55


56


Landscaping Solutions

Paver Index

MEAN

PRODUCT NAME

WORK SIZE

DIMENSIONAL TRANSVERSE DEVIATION BREAKING (RANGE)

SRV

ABRASION DURABILITY

PACK SIZE

LOAD

TYPICAL QUANTITY PACK PER m2 WEIGHT (kg)

Available *TUMBLED

PAGE

Astra Tegel

200 x 200 x 65

R1

T4

U3

A2

FP100

200

1092

25

Astra UDF

200 x 64 x 65

R1

T4

U3

A3

FP100

600

1056

75

✓

29

Astra UWF

200 x 50 x 65

R1

T4

U3

A3

FP100

800

1160

100

✓

29

✓

29

Astra UWF Tumbled

200 x 50 x 65

R1

T4

U3

A2

FP100

800

1160

100

Atlas UWF

200 x 50 x 65

R1

T4

U3

A3

FP100

800

1160

100

34

32

Atlas UWF Tumbled

200 x 50 x 65

R1

T4

U3

A2

FP100

800

1160

100

Auraton DF

200 x 64 x 85

R1

T4

U3

A3

FP100

756

2030

75

✓

32 22

Auraton WF

200 x 48 x 85

R1

T4

U3

A3

FP100

1040

2080

100

✓

22

Bassalt DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

28

Bassalt WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

28

Bochum Orange Multi

200 x 100 x 62

R1

T4

U3

A3

FP100

560

1568

50

36

Bonn Golden Multi

210 x 50 x 70

R1

T4

U3

A3

FP100

864

1296

90

38

Bremen Brown

200 x 100 x 62

R1

T4

U3

A3

FP100

560

1568

50

Bruno (Rood-Bruin) DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

23

Bruno (Rood-Bruin) WF

200 x 48 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

23

Bruno Tegel

200 x 200 x 65

R1

T4

U3

A2

FP100

200

1092

25

Bruno Wasserstrich (Delft Dark Blend) DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

23

Bruno Wasserstrich (Delft Dark Blend) WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

23

Caron Tegel

200 x 200 x 65

R1

T4

U3

A2

FP100

200

1218

25

Caron UDF

200 x 64 x 65

R1

T4

U3

A3

FP100

600

1076

75

Diamond Pattern Blue

200 x 100 x 65

R1

T4

U3

A3

FP100

400

1165

50

Diamond Pattern Red

200 x 100 x 65

R1

T4

U3

A3

FP100

400

1165

50

Dione UDF

200 x 64 x 65

R1

T4

U3

A3

FP100

600

1056

75

✓

27

Dione UWF

200 x 50 x 65

R1

T4

U3

A3

FP100

800

1160

100

✓

27

36

34

34 ✓

29 44 44

Dione UWF Tumbled

200 x 50 x 65

R1

T4

U3

A2

FP100

800

1160

100

32

Dortmund Dark Multi

200 x 100 x 62

R1

T4

U3

A3

FP100

560

1568

50

36

Dragfaced Chamfered Blue

200 x 100 x 62

R1

T4

U3

A3

FP100

396

1144

50

40

Dragfaced Chamfered Multi Brindle

200 x 100 x 62

R1

T4

U3

A3

FP100

396

1144

50

40

Dragfaced Cobbles Square Edged Blue

100 x 100 x 65

R1

T4

U3

A3

FP100

768

1200

100

42

Dragfaced Cobbles Tumbled Blue

100 x 100 x 65

R1

T4

U3

A3

FP100

768

1200

100

42

Dragfaced Square Edge Blue

200 x 100 x 62

R1

T4

U3

A3

FP100

396

1144

50

40

Essen Red

200 x 100 x 62

R1

T4

U3

A3

FP100

560

1568

50

Euroton Novoton DF

200 x 64 x 85

R1

T4

U3

A3

FP100

756

2030

75

✓

24

Euroton Novoton WF

200 x 48 x 85

R1

T4

U3

A3

FP100

592

1500

75

✓

24

Euroton Varia DF

200 x 48 x 85

R1

T4

U3

A3

FP100

592

1500

100

Euroton Varia WF

200 x 64 x 85

R1

T4

U3

A3

FP100

592

1500

75

✓

22

Gala Wasserstrich (Paars-Blauw) DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

27

Gala Wasserstrich (Paars-Blauw) WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

27

Hamburg Buff Multi

200 x 100 x 62

R1

T4

U3

A3

FP100

560

1568

50

36

Hannover Buff Brindled

200 x 100 x 62

R1

T4

U3

A3

FP100

560

1568

50

36

Herne Dark Brindled

210 x 50 x 70

R1

T4

U3

A3

FP100

864

1296

90

Incana Wasserstrich DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

27

Incana Wasserstrich WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

27

Juist

210 x 50 x 70

R1

T4

U3

A3

FP100

864

1296

90

38

Koln Red Multi

210 x 50 x 70

R1

T4

U3

A3

FP100

864

1296

90

38

Masteik Tegel

200 x 200 x 65

R1

T4

U3

A2

FP100

200

1218

25

Mastiek DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

26

Mastiek LF

240 x 60 x 65

R1

T4

U3

A3

FP100

660

1584

70

✓

26

Mastiek Wasserstrich DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

26

Mastiek Wasserstrich WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

26

Mastiek WF

200 x 48 x 85

R1

T4

U3

A3

FP100

864

1690

100

✓

26

Munster Red Brindled

200 x 100 x 62

R1

T4

U3

A3

FP100

560

1568

50

Nero DF

200 x 64 x 85

R1

T4

U3

A3

FP100

628

1660

75

✓

30

Nero Wasserstrich DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

30

Nero Wasserstrich WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

30

Nero WF

200 x 48 x 85

R1

T4

U3

A3

FP100

864

1690

100

✓

30

Novoton DF

200 x 64 x 85

R1

T4

U3

A3

FP100

756

2030

75

✓

24

Novoton WF

200 x 48 x 85

R1

T4

U3

A3

FP100

1040

2080

100

✓

24

Oliva DF

200 x 48 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

26

Oliva Wasserstrich DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

26

Oliva Wasserstrich WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

26

Oliva WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1364

100

✓

26

Omber DF

200 x 64 x 85

R1

T4

U3

A3

FP100

628

1660

75

✓

29

Omber WF

200 x 48 x 85

R1

T4

U3

A3

FP100

864

1690

100

✓

29

Orion Tegel

200 x 200 x 65

R1

T4

U3

A2

FP100

200

1092

25

Orion UDF

200 x 64 x 65

R1

T4

U3

A3

FP100

600

1056

75

✓

24

Orion UWF

200 x 50 x 65

R1

T4

U3

A3

FP100

800

1160

100

✓

24

Orion UWF Tumbled

200 x 50 x 65

R1

T4

U3

A2

FP100

800

1160

100

Padova (Eindhoven Mixed Red) DF

200 x 64 x 85

R1

T4

U3

A3

FP100

628

1517

75

✓

25

Padova (Eindhoven Mixed Red) WF

200 x 48 x 85

R1

T4

U3

A3

FP100

864

1690

100

✓

25

Padova LF

240 x 60 x 65

R1

T4

U3

A3

FP100

660

1584

70

✓

24

Paviona (Arnhem Red) DF

200 x 64 x 85

R1

T4

U3

A3

FP100

628

1660

75

✓

23

Paviona (Arnhem Red) LF

240 x 60 x 65

R1

T4

U3

A3

FP100

660

1663

70

✓

23

Paviona (Arnhem Red) WF

200 x 48 x 85

R1

T4

U3

A3

FP100

864

1690

100

✓

23

Porto DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✓

27

Porto WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

27

57

36

22

38

34

36

34

32


MEAN

PRODUCT NAME

WORK SIZE

DIMENSIONAL TRANSVERSE DEVIATION BREAKING (RANGE)

SRV

ABRASION DURABILITY

PACK SIZE

LOAD

TYPICAL QUANTITY PACK PER m2 WEIGHT (kg)

Available *TUMBLED

PAGE

Reno UDF

200 x 64 x 65

R1

T4

U3

A3

FP100

600

1083

75

✓

30

Rosa Wasserstrich DF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

24 24

Rosa Wasserstrich WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

Sienna (Zandgeel) - Hague Cream DF

200 x 64 x 85

R1

T4

U3

A3

FP100

628

1660

75

✓

20

Sienna (Zandgeel) - Hague Cream WF

200 x 48 x 85

R1

T4

U3

A3

FP100

864

1690

100

✓

20

Smooth Chamfered Blue

200 x 100 x 65

R1

T4

U3

A3

FP100

400

1165

50

42

Smooth Stable Blue

200 x 100 x 65

R1

T4

U3

A3

FP100

400

1165

50

44

Square Pattern Blue

200 x 100 x 65

R1

T4

U3

A3

FP100

400

1165

50

Triton UDF

200 x 64 x 65

R1

T4

U3

A3

FP100

600

1034

75

✓

28

Triton UWF

200 x 50 x 65

R1

T4

U3

A3

FP100

800

1160

100

✓

28

44

Triton UWF Tumbled

200 x 50 x 65

R1

T4

U3

A2

FP100

800

1160

100

Vintage Tumbled Blue Brindled

215 x 102 x 65

R1

T4

U3

A3

FP100

400

1311

45

32

Viola (Rood) DF

200 x 64 x 85

R1

T4

U3

A3

FP100

592

1500

75

✓

23

Viola (Rood) WF

200 x 48 x 85

R1

T4

U3

A3

FP100

752

1525

100

✓

23

Zonnebloem Wasserstrich (Tilberg Blended Ochre) DF

200 x 64 x 85

R1

T4

U3

A3

FP100

616

1680

75

✕

22

Zonnebloem Wasserstrich (Tilberg Blended Ochre) WF

200 x 48 x 85

R1

T4

U3

A3

FP100

832

1700

100

✓

22

42

All technical information contained in this book is correct at the time of going to press. Wienerberger reserve the right to add, delete or alter products without notice and recommend customers contact us to obtain the latest information.

A

B

PRODUCT NAME

WORK SIZE

C

D

E

F

G

H

MEAN

DIMENSIONAL TRANSVERSE DEVIATION BREAKING (RANGE)

SRV

ABRASION DURABILITY

PACK SIZE

LOAD

I

J

TYPICAL QUANTITY PACK PER m2 WEIGHT (kg)

K

L

Available *TUMBLED

PAGE

Guide to technical data – the details A. Product Name B. Work Size Provides the work dimensions of the paver (excluding nibs). The principal requirement of BS EN 1344:2002 is that the work dimensions of length, width and depth are to be stated. C. Dimensional Deviation The difference between the largest and the smallest measurement of any given measured dimension to be found within a sample of 10 pavers. D. Mean Transverse Breaking Load Measures the load a paver can withstand.

E. SRV F. Abrasion Resistance Indicates durability of the surface when in contact with vehicular and pedestrian traffic. G. Durability A measure of the freeze/ thaw resistance of clay pavers. H. Pack Size Number of pavers packaged together to form a pack..

Total weight of a pack of pavers allowing for nominal moisture content. J. Quantity per m2 K. Available tumbled L. Page All pavers in this brochure are also suitable for domestic application.

I. Typical Pack Weight

For more detailed or specific technical performance please contact our Design Services department at our Head Office on (0161 491 8200)

58


Complete Building Solutions

Wall Solutions

Wall Solutions

Wienerberger Ltd Wienerberger House, Brooks Drive Cheadle Royal Business Park, Cheadle, Cheshire, SK8 3SA 0161 491 8200 T 0845 303 2524 F 0844 555 5770 office@wienerberger.co.uk www.wienerberger.co.uk

Roof Solutions

Landscaping Solutions


Turn static files into dynamic content formats.

Create a flipbook
Guide to natural clay paving by Wienerberger AG - Issuu