Baumit Renders for Porotherm Masonry
Application Guidelines
n Light and easy application n Tried and tested
Porotherm is a Wienerberger Group brand
Ideas with a future
Baumit Renders for Porotherm Masonry
International presence
Welcome to Baumit The Baumit brand is recognised throughout Europe as a leader in building materials. It is part of the Wietersdorfer Group based in Klagenfurt, Austria, which has companies in 20 countries employing over 3000 people with an annual turnover in 2010 of â‚Ź680m. Baumit products and systems are now available in the UK and Ireland through Baumit UK Ltd and this company provides technical backup, sales support, product training and know how to our network of distribution partners and approved installers.
Baumit innovation True to its philosophy, �Ideas with a Future“, the Baumit brand continually develops and produces innovative products and systems tailored to the demands of the customer. Baumit offers a range of specially formulated render, plaster and thermal insulating systems for Porotherm masonry. The systems are vapour permeable and complement the breathable nature of Porotherm masonry. The products are suitable for machine application to increase efficiency and maintain consistent material quality during application.
2
External wall insulation system
Baumit external wall insulation system - open KlimaFacade The Baumit open KlimaFacade is a breathable insulation system. The perforations in the Baumit open速reflect boards enable water vapour to diffuse through the insulation system. The system offers the enhanced thermal performance of silver-grey EPS without compromising the breathability of the Porotherm masonry. The white coating on the board surface reflects low level sunlight. This reduces heat absorption and protects the board from the effects of significant temperature changes which can occur between day and night.
3
Baumit Renders for Porotherm Masonry
Baumit lightweight render system
Baumit lightweight render system The Baumit render systems for Porotherm comprise of a basecoat render and a decorative, coloured topcoat render. In certain circumstances an intermediary reinforcement coat may also be required. Baumit basecoat renders The core component of the system is the lightweight render basecoat. The render is specifically designed to suit Porotherm masonry in terms of strength compatibility and provide good weather resistance. The lightweight basecoat acts as a buffer zone between the masonry and topcoat render, absorbing stresses from the masonry and thereby reducing the risk of cracking to the topcoat. These products are suitable for internal and external use onto the Porotherm block substrate.
Porotherm masonry
Baumit basecoat render
Porotherm T7, T8
Baumit MP 69 Speed
Porotherm S9, S11, T12
Baumit MP 69 Plus
Porotherm 100, 140, 190 Baumit MP 69
Baumit reinforcement coat The reinforcement layer of MC55W provides an extra level of protection to the render system when applied in locations exposed to severe or very severe weather conditions. It comprises of a 3 - 5 mm thick layer of contact mortar with an embedded layer of Baumit StarTex reinforcing mesh applied over the basecoat render.
4
Baumit topcoat renders
Decorative finishes Baumit topcoat renders The render system is completed with a decorative topcoat render to provide the essential water resistance to the outer surface of the render system. The Baumit topcoat renders are avalable in a range of aggregate sizes and colours from the Baumit Life colour system. Baumit ready mixed topcoat renders do not require painting. A wide choice of Baumit topcoats is available including: ■ SilikonTop ■ SilkikatTop ■ NanoporTop Application A coat of DG27 Baumit Primer is applied to surface of the basecoat render with a brush or roller and left to dry for 24 hours. The topcoat render is applied with a stainless steel plastering trowel or suitable spraying equipment and smoothed out flat to the thickness of the aggregate. After a short while the surface can be textured in tight circular motions using a smooth plastic floating trowel. The topcoat render should be applied systematically to complete sections without breaks. A wet edge must be maintained to avoid inconsistencies in the finished texture.
5
Baumit Renders for Porotherm Masonry
Baumit lightweight plaster system
Baumit Kalkin plaster system Baumit Kalkin range of plastering products regulate the internal humidity levels, protecting naturally against mould growth. The products are purely mineral-based and free of pollutants to ensure a healthy living environment. The system basecoat plaster and finishes have a micro-pore structure which provides outstanding climate-regulating properties. Excess moisture from the air is absorbed into the micro-pores and held, to maintain a dry plaster surface. As the internal conditions become drier the moisture is slowly released back into the room to rebalance the humidity levels.
6
Baumit Kalkin absorbs 3-4 times more moisture than a conventional gypsum plaster ‌
... and releases it slowly and evenly back into the room.
Application
Spray application
Ruling off with a straight edge
Site work Porotherm masonry The rules for best practice must be observed when erecting Porotherm masonry. Breakages and loose materials or open joints in the wall surface should be repaired and filled. Protect the masonry and building materials from water ingress during construction. The Porotherm masonry should be dry before rendering. Remove any signs of efflorescence with a dry brush. Do not use water. Remove any dust, dirt or other contaminants from the surface of the masonry.
Removing laitance with a grid float
General basecoat application Baumit lightweight render systems and Klima plaster sytems are applied directly onto Porotherm masonry. Special surface pretreatments are not required. Where necessary, the walls may be mist sprayed with water to reduce high suction. Refer to our technical support team for guidance on dealing with changes in the rendering substrate such as concrete elements, steel lintels or insulants etc. ■
■
■
■
pray or hand apply the render or plaster in two passes, wet on wet to reduce the S suction from the masonry. Rule off the render or plaster with a straight edge to produce a flat uniform basecoat free from undulations to the required thickness. On hardening, key the surface with a grid float or consolidate it with a rubbing up float. Leave to dry for 1 day per mm basecoat thickness before applying further coatings.
7
Baumit Renders for Porotherm Masonry
Product Information
Baumit MP 69 Speed
Baumit MP 69 / MP 69 plus
Universal, accelerated setting, lightweight lime-cement render with lightweight aggregate. Specially designed for use onto thermal insulating masonry as a basecoat and topcoat in internal and external areas.
Universal, lightweight lime-cement render with lightweight aggregate. Specially designed for use onto thermal insulating masonry as a basecoat and topcoat in internal and external areas.
Baumit MultiContact MC 55 W
Baumit Kalkin RK 38
Mineral based, multi-purpose contact mortar for use as a reinforcement coat with Baumit StarTex reinforcing mesh over render basecoats, old facades and selected render carrier boards. Aggregate size 1.2 mm.
Pure lime basecoat and topcoat plaster for use in all internal areas. Special microporous design for rapid absorption and release of water vapour. Certified by eco-Institut. Purely mineral and free from toxins. This surface finish is not suitable for direct tile adhesion, please contact our technical support team. Aggregate size 0.8 mm.
Baumit Kalkin KP 36 W Natural white, lime basecoat plaster for use in all internal areas. Special microporous design for rapid absorption and release of water vapour. Certified by eco-Institut. Purely mineral and free from toxins. Aggregate size 1 mm.
Baumit Kalkin Glätte
Baumit SEP
Baumit SilikonTop
Mineral based topcoat render for a decorative freestyle textured finish. Weather resistant and water vapour permeable. For internal and external areas. Suitable for hand or machine application. Aggregate size 2, 3, and 4 mm.
Ready to use, mineral wet top coat render for thin coat application. Provides a vapour permeable and stain retarding decorative finish with scratched or dragged grain texture for internal and external areas. Suitable for hand or machine application. Aggregate size 1.5, 2 and 3 mm.
Baumit DG27 Primer Acrylic based liquid primer for use on internal and external areas which helps to reduce and equalize the suction on newly prepared surfaces and to ensure good adhesion with the Baumit topcoat renders.
Version: 1/2013 (HB 3157)
For more information, please contact the Baumit technical support team on 0333 358 3434
Baumit UK Ltd 4200 Waterside Centre Solihull Parkway Birmingham Business Park Birmingham B37 7YN
UK: Tel: +44 (0) 333 358 3434 IRL: Tel: +353 (0)1-234 2532 www.baumit.co.uk info@baumit.co.uk
Natural white lime skimming plaster for creating a fine smooth matt finish onto Kalkin basecoat plasters and other lime and lime-cement renders and concrete surfaces. For use in internal areas only.
Baumit NanoporTop High performance thin-layer top coat render with superior self-cleaning properties and breathability due to nano-technology. Available in scratched textures (1.5/2/3 mm)
Your local distributor