BioTherm Benchwarmer™ ®
Energy efficient, effective bottom heat uses conventional hot water heaters. Install on or under the bench top or on the floor.
TrueLeaf Benchwarmer™ Kit Features:
Benchwarmer™ Kit Includes: • • • • • • • • • •
FABRICATION
• Efficient: Put the heat where it is needed, at the crop level. Allows lower air temperatures and 20-40% less fuel use. • Effective: Heating the root zone and microclimate increases plant quality and shortens the production cycle. • Simple: Pre-packaged Benchwarmer Kit installs quickly and easily— no special tools needed. One to Five benches up to 1,000 SF— install on top of benches, under benches or on the greenhouse floor. • Safe: Reliable heat without the shocking experience of electric mats. • Supported: 24/7 technical support @ 800.438.4328
Anybody can install it: We packaged our Benchwarmer kits so they install quickly and easily. We supply all the drawings, we’ve prewired all of the electrical parts, and if you need help call us at 800-438-4328!
TrueLeaf BioTherm MicroClimate™ Tubing TrueLeaf BioTherm MicroClimate™ Headers TrueLeaf BioTherm MicroClimate™ Grabber-Trak Air and Water Controls Circulator Pump Pre-Wired Control with special Soil Sensor Thermometers to check supply and return water temperatures Installation Manual with extensive drawings 24/7 Technical Support 10 year limited warranty on bench top materials
Call For Pricing!
800-468-4011
Convection Tubing
This polyethylene is 4 mil and is protected with strong ultra violet inhibitor. The inhibitor is not tinted in order to retain maximum clarity for light penetration. The plastic also has an additive to increase its strength and clarity. These tubes are manufactured using a formulation specified for the greenhouse environment. Each tube is custom punched to your specifications.
Punching Options:
Normal punch position is at 8 and 4 o’clock. For heating application, 7 and 5 o’clock should be specified. 9 and 3
o’clock punching provides more lateral air movement. Edge punching can be done when only one row for holes is required. Hole sizes available: 2”, 2½”, 3”. Please specify length of greenhouse for proper punching.
NORMAL USED UNLESS OTHER SPECIFIED
FOR MAX LATERAL AIRFLOW
FOR HEATING
FOR DIRECTIONAL AIRFLOW
STAGGER PUNCH AND ORDERS 0VER 1000’ FOB MFG. Catalog #
Description
Lay Flat
21-201200
12" Convection Tubing
19"
21-201800
18" Convection Tubing
29-1/2"
21-202400
24" Convection Tubing
38"
21-203000
30" Convection Tubing
47"
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
F.O.B. • Minimum: There is a $25.00 Minimun order on Convection Tubing • Unpunched: Unpunched Tubing is .05¢/ LF. Less
• All orders ship direct. P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
117
A.V Lifetime Benches
FABRICATION
A-V frames are stronger, lighter and more durable than wood. The 20,000 psi UV protected, fiberglass material resists weathering and will not rust or decay. Many standard sizes are available, custom sizes by request.
• Assembly: Listed benches are shipped
UNASSEMBLED BENCH
UNASSEMBLED. Assembled units are available, call for pricing.
• Legs: Benches without legs DO NOT include: Legs,
Item #
Size
# of Legs
Leg Sockets, or Leg Hardware. Leg bracing is available @ $18/Bench (recommended where heavy loading may occur).
BT24096
2' x 8'
6
BT48096
4' x 8'
6
BT72096
6' x 8'
6
kits per seam). Above 54” wide - use 3 kits per seam.
BT96096
8' x 8'
9
• Splice Kits: Recommended - 18”-54” wide benches (2 • Splice Kits = $3.25 each
A.V. Lifetime Bench is a SPECIAL ORDER item, shipped direct from the factory. Please allow ample time for delivery. F.O.B. VA.
E-ZY Stack Display Bench
Stack up to 3 tiers high
Add an instant display anywhere with our quick set stackable benches. Sturdy yet elegant design with clear glass-look top, accents your mixed containers, baskets and tie in products for added impulse sales.
for high impact eye catching color!
E-zy Assembly. Width x Length 1’ x 4’ 1’ x 6’ 2’ x 4’ 2’ x 6’ 3’ x 4’ 3’ x 6’ 4’ x 4’ 4’ x 6’ Leg Height: 12”
118
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
FABRICATION
Bench Mart Deluxe Size 10’ x 6’ 10’ x 12’ 10’ x 18’ 10’ x 24’ 6’ addt’l sections
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
119
FABRICATION
PX7001
PX7001 Fence-On-A-Step Bench Size 6’ Base 12’ run* 18’ run* 24’ run* add 6’ * Splitting connected runs may require additional components. Call for more information.
120
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
E-ZY Grower Bench Frame
Choose the options you need and call for your
customized quotation
today!
• Rolling or Stationary • Bench width of 3', 4', 5', 5½', 6', or 6½'
• Legs set in concrete or on solid foundation
• Lengths divisible by 6' or 8'
are standard, other lengths are considered custom. • Steel Corner splices or PVC corners.
FABRICATION
Adding benches to your house is an effective way to maximize growing area without adding additional structures. The benches can be set in concrete or placed above ground on a solid foundation. Leg sets are made of 14 gauge steel tubing. Bench framing is made of aluminum "F" rail around the perimeter, connected every 2' with a 1" sq. piece of steel tubing or a 1½" aluminum "I" beam depending on the tye of "F" rail selected. Hot dip galvanized, 13 gauge expanded metal is used to finish the bench tops. E-zy Grower benches are made of the best materials available and are designed for easy assembly... Advantages Offered Over The Competition:
• Bench top cross pieces are 1' x
1' and 1' x 2' 16 gauge steel; not 18 gauge as many. • We use 1' x 2' rectangular steel where ends of expanded metal join for easier more positive support. • For retail use we offer optional attractive high density polyethylene rounded corners.
• Rollers are 14 gauge steel
1-3/8" not 16 or 17 gauge that others use or 1-1/4" diameter, which in time becomes egg shaped. Option of using 1-3/8" diameter is offered for extra long benches or benches that are heavily loaded. • We use round tubing for legs for easier installation.
Expanded Metal Sheets for Bench Tops • Continuous Air Flow - Reduces fungus by allowing unrestricted air passage.
• Extra Long Life - Hot dip galvanized zinc coating after expansion. This is the best available and will greatly outlast cheaper grades that are galvanized before expansion. • Drainage - 76% open area allows easy drainage. • Strong - 13 gauge allows pots to sit level. • No Maintenance - Soil and water drop right through the bench - eliminating weed, soil, and water accumulation. • Light Weight - 94 lb. per hundred square feet. • Low Cost - You'll find this bench to be more economical than most bench material now used.
Sizes: 6’ or 8’ stock lengths in 4’, 5’, 5.5’, 6’, 6.5’ widths prices are subject to change without notice
www.waldoinc.com
Custom Sizes - Call For Quote! F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
121
PX7001 Fence-On-A-Step Bench
Base Dimensions: 72” W x 39” D x 60” H
A little flair, a little style, a lot of versatility, that’s what Poly-Tex’s PX7020 display offers. You’ll like how your hanging baskets rest at the right height for the customer convenience and how the modular design allows you to add the sections you need to get the length you want. You can also place your units back-to-back and create a highcapacity center aisle. Flexible, stylish, affordable—is that what you had in mind? FABRICATION
Specifications
PX7020 shown with optional
Product
Description Expanded metal bench tops Sold in 6’ lengths
FOB Castle Rock, MN
PX7001 shown with optional casters, expanded metal bench tops and basket tower
PX7001 Options “A” style basket tower when ordering.
PX7001 shown with optional “A”-style basket tower
Please specify either standard basket tower or
expanded metal bench tops Construction: Galvanized steel and basket purlin Capacity: (27) 1020-style flats per 6-foot section • Optional 27-inch high purlin holds (6) 10-inch hanging baskets per 6-foot section. • Optional 26-1/4” high stand and basket tower holds (18) 10-inch hanging baskets • Optional 29-1/2” high “A”-style basket tower holds (12) 10-inch hanging baskets
Standard tower with canopy Choice of red (shown), blue, green, or yellow and white stripe vinyl (6-foot only) A-tower with canopy Choice of red, blue (shown), green, or yellow and white stripe vinyl (6-foot only) Casters Available on 6’ units
6’ Display w/ Purlin
12’ connected run w/Purlin
18’ connected run w/Purlin
24’ connected run w/Purlin
w/tower $305* w/expanded bench add $62
w/tower $565* w/expanded bench add $124
w/tower $825* w/expanded bench add $186
w/tower $1,085* w/expanded bench add $248
$370
$980
$675
$1285
PX7021 Double Tri-Step Display See double the blooms and double the profits with Poly-Tex’s FB3021 double tri-step display. Featuring the same “stepped” shelf depth (from 36 to 24 to 18 inches), this unit gives you all the visual appeal of our tri-step display… times two, and the patented shared end support connecting system allows you to create aisles of color. You’ll appreciate Poly-Tex’s tool-free assembly and galvanized steel construction. Choose additional options, like double hanging basket purlins and expanded metal bench tops to optimize your sales capacity. Added options include two-sided 11” X 7” sign holder, double hanging basket purlins and expanded metal bench tops.
Specifications
• Construction: Galvanized steel • Capacity: (48) 1020-style flats per 6-foot section. Optional 48” high double basket purlin holds (24) 10-inch hanging baskets
6' Display
122
Waldo & Associates, Inc Grower Supply Catalog
PX7021 Options Product
Product Options
12' Connected Run
P: 800.468.4011
18' Connected Run
F: 419.666.2079
Base Dimensions: 73” W x 78” D x 44” H
www.waldoinc.com
Description
Price
Expanded Metal Bench tops Sold in 6’ lengths
Add $130 per 6’ section
24' Connected Run
prices are subject to change without notice
Snap & Grow 8’x8’ Greenhouse
Specifications:
FABRICATION
• Corrosion Resistant Frame: Heavy-duty aluminum frame withstands both the elements and moist greenhouse conditions. • Strength and Clarity: SnapGlass polycarbonate panels are virtually unbreakable, and they are as crystal clear as glass. • Quick Assembly: Set-up requires minimal tools and only takes about a day. • Adjustable Ventilation: With the preassembled roof vent and the unique double door, your plants will receive excellent air circulation. • Anchoring Clips: Allows you to simply affix your greenhouse to a wood or concrete foundation. (Anchor bolts not included.)
Free shipping on Snap &
• Width: 8’ 1/2” Grow orders shipped • Length: 8’ 1/2” within the contiguous • Sidewall height: 5' 3” United States! • Height to apex: 8' 6.5”" • Frame Spacing: 8’ • Cover: Clear, single layer SnapGlas polycarbonate panels • Frame: Aluminum with rigid polypropylene SmartLock connectors • Ventilation: (1) adjustable roof vent call for quote!
Cashier Tables Our new cashier tables are constructed from heavy-duty 18 ga. galvanized steel for sleek styling and easy cleanup. These strong, attractive tables feature simple assembly and can be bolted together in different configurations to fit your needs.
Product #
Description
CH8100
Cashier Table “L” Assembly - galvanized
CH8000
Cashier Table 24” x 72” - galvanized
CH8001
Cashier Table 24” x 36” - galvanized
CH8023
Drawer for Cashier Table - galvanized
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
123
FABRICATION
Tower Display
BT 3001
The new Tower Display can serve a multitude of purposes and has many configurations to fit your needs and space. This display was created to give you more space for hanging items like baskets, chimes and birding items that you want to sell alongside related merchandise like flats, bird seed or other shelf products. Perfect as an island or aisle to incorporate vertical merchandising!
Specifications
Construction: Galvanized steel Base Dimensions: 17'-10"w x 46"d x 90 "h Capacity: (36) 10-inch hanging baskets
Tower Display configuration
Standard Display
with optional lower bench
Tower Display Part# BT3001
Tower Price
Benching Section
$239
$220
Configurations may require additional components. Call for more information.
124
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
2 & 3-Tier Displays
PX7030 & PX 7032
PX7032-CP Single unit w/Casters + Purlin Specifications
FABRICATION
Set it up with our tiered units featuring a narrower profile for tight spaces also and sidewalk displays. Our expanded metal bench tops come standard with both the FB3030 and the FB3032. You can choose from many other options to get these displays looking just the way you want them, including casters, power coated colors, sign holders of cross merchandisers. Add additional lower rear benches to either model and you’ll be able to display up to 15 flats with the 2-tier display or 27 flast on the 3 tier dispaly. More merchanise in a smaller amount of space? Check! PX7030-CP Single unit w/Casters + Purlin Specifications
Construction: Galvanized steel Capacity:(21) 1020-style flats per 6-foot section Base Dimensions: 73.25"w x 40.5"d x 44.5"h
Construction:Galvanized steel Capacity:(12) 1020-style flats per 6-foot section Base Dimensions:73.25"w x 27.5"d x 30"h
PX7032 Single unit w/expanded metal (standard)
PX7030-CS Single unit w/Casters + Sign Holder
Our standard powder coating material creates a high quality finish that's sure to get attention. This oven cured, U.V. stabilized material is great for either indoor or outdoor use. Use color to create product buzz, call attention to promotional areas or coordinate with your current décor.
Tool-free assembly as always and now fewer parts. That means you need less space to store displays seasonally and fewer misplaced parts when it’s time for set-up.
The new 1 ¼" square, steel tube frames are stronger to support greater loads.
PX7030 Configurations Part #
PX7032 Configurations
Description
Part #
Description
PX7030
Single unit w/expanded metal (standard)
PX7032
PX7030-CP
Single unit w/Casters + Purlin
PX7032-CP
Single unit w/expanded metal (standard) Single unit w/Casters + Purlin
PX7030-CS
Single unit w/Casters + Sign Holder
PX7032-CS
Single unit w/Casters + Sign Holder
PX7030-XT6
6’ Extension for Single 6’ Unit
PX7032-XT6
6’ Extension for Single 6’ Unit
PX7030-XT6P
6’ Extension for 6” Unit w/ Purlin
PX7032-XT6P
6’ Extension for 6” Unit w/ Purlin
PX7030-XT6S
6’ Extension for Single 6’ Unit + Sign Holder
PX7032-XT6S
6’ Extension for Single 6’ Unit + Sign Holder
*Splitting connected runs may require additional components. Call for more information.
prices are subject to change without notice
www.waldoinc.com
*Splitting connected runs may require additional components. Call for more information.
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
125
FABRICATION
Tree Display
The new Tree Display is your helping hand if you sell potted trees. Retainer arms hold the trunk securely to prevent blown-over trees, broken limbs and leaf loss. Adjustable arms in two sizes accommodate a variety of tree and pot sizes to match your product mix. Orange flip gates allow easy access for your customers and quick re-stocking for you. Options include a sign holder and extension kits to create a connected run.
Specifications
Construction: Galvanized steel Capacity: TR3020 – 8 trees, TR3030 – 16 trees, Base Dimensions: 4' 5" x 10' Tree Display Part#
126
Description
Includes
TR3020
Tree Display Single
(2) Ends (1) Support Beam (4) 26” Retainer Arms (4) 16” Retainer Arms and Hardware
TR3021
Tree Display Adder Single
(1) End (1) Support Beam (4) 26” Retainer Arms (4) 16” Retainer Arms and Hardware
TR3042
Tree Display Double - 42”
(2) Ends (1) Center Beam (6) 42” Retainer Arms and Hardware
TR3030
Tree Display Double - 30”
(2) Ends (1) Center Beam (8) 30” Retainer Arms and Hardware
TR3043
Tree Display Extension - 42”
(1) End (1) Center Beam (6) 42” Retainer Arms and Hardware
TR3031
Tree Display Extension - 30”
(1) End (1) Center Beam (8) 30” Retainer Arms and Hardware
TR3041
Tree Display Sign
Waldo & Associates, Inc Grower Supply Catalog
11” x 7” with Retaining Clip
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
E-ZY Mini Basket Arbor The Mini Basket Arbor is designed to be an extra sales tool - compact enough to place almost anywhere, yet holding enough product to have real sales impact! It holds 42 full 10” hanging baskets and assembles with wing nuts. FABRICATION
Wreath Display Option: Use our Mini Arbor year ‘round with this option. Beautifully displayed wreaths at your customer’s eye level for easy reach. Holds one of the following: • (80) 12” wreaths • (48) 24” wreaths • (16) 36” wreaths Caster Option: Make it an E-zy to roll, portable display unit. Load it up and wheel it at the front of your retail sight for roadside display. At closing time, just wheel inside! Includes: 4 heavy-duty 5” polyolefin casters. Catalog # 11-102031
Description Arbor ONLY (3.5’ W x 6’ L x 7’ H)
E-ZY Basket Arbor Our basket arbors are built to last and designed to make you a profit immediately! Now you can display all your hanging baskets in one attractive, money-making area without the hassle and expense of trying to build your own display. These units are deisgned for quick and easy assembly on almost any surface. Put one up and watch those baskets SELL, SELL, SELL!
Specification
• Bows: 1.315 14-gauge steel tubing. • Purlins: 1.315 17-gauge steel tubing • Arbor height at peak: 8’. • Swedged bow slides easily into center pieceand is fastened with a 1/4” x 2” carriage bolt and nut.
Displays between 50-150 10” hanging baskets!
Catalog #
Description
11-100091
9½’ x 8’ E-zy Basket Arbor w/ 2 bows & 8 Purlins
11-100092
9½’ x 12’ E-zy Basket Arbor w/ 3 Bows & 8 Purlins
11-100093
9½’ x 20’ E-zy Basket Arbor w/ 3 Bows & 8 Purlins
11-101990
8’ Arbor Add-On w/ 1Bow & 8 Swedged Purlins
11-101990
12’ Arbor Add-On w/ 1Bow & 8 Swedged Purlins
11-101990
12’ Arbor Add-On w/ 2 Bows & 8 Swedged Purlins
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
127
The newest way to display your hanging baskets! Baskets get seen and FABRICATION
sold when displayed
E-ZY Basket Curve display! on our
The all steel construction of our 12’ Starter Unit assembles easily to generously display 36 or more full-bloom spreading baskets with enough spacing to avoid damage. The continuous curve of color will WOW your customers and your basket sales! Really knock their socks off with two E-ZY Basket Displays loaded on either side of your entrance or for impulse buys at the check out! Catalog #
Description
11-159120
E-ZY Basket Curve 12’ Starter Unit
14-644288
Banner Bar
93-032500
Custom Banner to fit Banner Bar (30” x 120”)
Shown with optional banner bar.
Shown with 30” x 120” Custom Banner.
128
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
Carts
800# The weight Capacity!
FABRICATION
Our durable metal and polypropylene garden carts are just what you have been looking for to transport all your gardening needs. Designed for durability and manufactured in Canada, these carts are sure to satisfy. 800# The weight Capacity!
3562 Poly Green Double Deck Push Cart (20” x 38” deck)
20x38W Small Metal Green Cart (20” x 38” deck)
3548 Plastic Green Wagon (20” x 38” deck)
• Pneumatic tires for a
800# the weight Capacity!
3910-G Green Poly Crate Wagon (30” x 46” deck)
Catalog #
Item #
35-901001
3548
35-902101
20x38W
35-901101
3562
35-904010
3910-G
35-903131
4WGC-D
4WGC-D 4-Wheel Double Deck Push Cart (24” x 48” deck)
smooth even ride • Auto type, anti-tip steering to prevents spills • Long Easy-Grip metal handle to save your heels • All metal parts are powder coated for long life • Upgrade to flat free tires for $25.00 per cart
Description Plastic Green Wagon (20" x 38" deck) Small Metal Green Cart (20" x 38" deck) Poly Green Double Deck Push Cart (20" x 38" deck) Poly Crate Wagon - Green (30" x 46" deck) 4-Wheel Double Deck Push Cart w/ 16” Pneumatic Tires (24” x 48” deck)
Carts come with standard pneumatic tires. UPGRADE TO FLAT FREE TIRES FOR AN ADDITIONAL $25/CART prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
129
Flat-Free Tires For Carts, Hand Trucks, Sprayers, Wheelbarrows, etc. FABRICATION
If you know the hassle of a flat tire, then you need our new Flat-Free Tire. These tires are Maintenance Free and mounted on heavy-duty steel rims with shielded ball bearings. You’ll never have to add air or fix a flat.
Flat-Free Tires are made of amazing micro-cellular polyurethane foam which is comprised of trillions of tiny air pockets - eliminating flats, while creating the bounce and load handling characteristics of conventional air filled tires. Polyurethane, unlike rubber, is not affected by damaging UV sun rays. Outer Skin The non-marking tough outer skin is more than twice as strong as rubber. It is also abrasion, chemical and ozone resistant.
Capacity
How Much Do Flats Really Cost?
Durability
Cost per flat tire:
Same as pneumatics
$30.00
(labor, parts, downtime, etc.)
Outer skin is tougher than pneumatics
Number of flats per year: 4
Performance
(average varies by region)
Designed to perform just like a pneumatic tire with the benefit of NO FLATS!
Total Cost: $120.00 (pneumatic tires)
Tire Diameter/ Description
Boot
Bearing Size
Tire Model #
35-810800
16" Flat Free Rib
00005
5/8” C-hub-4”
4.80/4.00-8
35-810801
16" Flat Free Rib
00061
3/4” C-hub-4”
4.80/4.00-8
35-830800
16" Flat Free Knob
00047
5/8” C-hub-6”
4.80/4.00-8
35-820810
10.5" Flat Free Saw Tooth
00010
5/8” O/S-hub-2.25”
4.10/3.50-4
35-820820
10.5" Flat Free Saw Tooth
00011
3/4” O/S-hub-2.25”
4.10/3.50-4
35-820814
10.5" Flat Free Saw Tooth
00014
5/8” O/S-hub-4”
4.10/3.50-4
35-820830
10.5" Flat Free Saw Tooth
00020
5/8” C-hub-3”
4.10/3.50-4
35-840850
8.5" Flat Free Jag
00026
1/2” C-hub-3”
2.80/2.50-4
35-840860
8.5" Flat Free Jag Swivel
00316
N/A
2.80/2.50-4
35-840861
8.5" Flat Free Jag Rigid
00315
N/A
2.80/2.50-4
Catalog #
130
Performance Flat-Free Tires look and feel like air filled tires. They are designed to mimic air filled tires. Best of all they never go flat and they are more than two times stronger than rubber tires.
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
Easy Grower Greenhouse
E-zy Roll Tube Side Vents
35 lb. Snow Load!
• With sturdy 1.66” 14-gauge bows on 1.9” 13-gauge ground posts • Peak height of 13’8” FABRICATION
• Ample Side Wall height of 8’1” (3’ in from side)
excellent for growing and retailing OPTIONAL: NOTE: Baseboard, wiring, and heater stack Greenhouse ground cover and benching available. not included in this package.
Good Things May Come In Small Packages, But GREAT Things Come in THE WORKS! 30’ x 96’ THE WORKS Greenhouse
30’ x 48’ THE WORKS Greenhouse
l
30’ x 96’ Gothic Midwall Greenhouse Frame, 4’ bow spacing 3-purlins
l
30’ x 48’ Gothic Midwall Greenhouse Frame, 4’ bow spacing 3-purlins
l
Crossbrace Assemblies every other bow
l
Crossbrace Assemblies every other bow
2
4-Year Clear Poly 48’ x 100’ Sheet (For Double Layer)
2
4-Year Clear Poly 48’ x 100’ Sheet (For Double Layer)
l
Inflation Fan 180cfm w/ wiring kit
l
Inflation Fan 60cfm w/ wiring kit
l
Poly Lock - Universal Spring Lock & Double Quick Lock
l
Poly Lock - Universal Spring Lock & Double Quick Lock
2
96’ Long E-ZY Roll-Up Side Vents
2
48’ Long E-ZY Roll-Up Side Vents
2*
PDP25OA Modine Heaters 115V. Standing Pilot (*specify natural gas or propane heater)
1*
PDP25OA Modine Heaters 115V. Standing Pilot (*specify natural gas or propane heater)
2
In-Line Single Stage Thermostats
1
In-Line Single Stage Thermostats
4
20” E-ZY Breeze Circulating Fans
2
20” E-ZY Breeze Circulating Fans
2
End Wall Kits with Steel Frame & Twin Wall Polycarbonate
2
End Wall Kits with Steel Frame & Twin Wall Polycarbonate
1
4’ x 8’ Sliding Polycarbonate Door
1
4’ x 8’ Sliding Polycarbonate Door
2
36” Exhaust Fan Assembly Two Speed 115V. 1HP
1
42” Exhaust Fan Assembly Two Speed 115V. 1HP
2
57” Inlet Shutter with Motor 115V.
1
39” Inlet Shutter with Motor 115V.
2
In-Line Two Stage Thermostat
1
In-Line Two Stage Thermostat
Call for THE WORKS Final Price
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
Call for THE WORKS Final Price
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
131
30' E-zy Grower Gothic Greenhouse 30' Gothic Specifications: Bows: 1.66, 14 gauge Gatorshield® tubing
Purlins: 1.315, 18 gauge Gatorshield® tubing
30’ Standard-Wall: FABRICATION
• Height At Peak: 12’0” • Height 3’ from Side: 6’3” • Groundpost: 36” (4” above ground) • Poly Width: 42’
30’ Mid-Wall:
• Height At Peak: 13’8” • Height 3’ from Side: 8’1” • Groundpost: 54” (26” above ground) • Poly Width: 48’
30’ Hi-Wall:
• Height At Peak: 15’10” • Height 3’ from Side: 10’4” • Groundpost: 84” (54” above ground) • Poly Width: 50’ Common lengths are priced below.
STANDARD-WALL FRAMES
Our 30' E-zy Grower Gothic Greenhouse is ENGINEER CERTIFIED to support snow loads of 35 lbs/square foot. (certified for continuously heated greenhouse with bows 4’ o.c. and crossbraces every 8’). What does that mean? It means that this is one tough greenhouse. It’s designed to take the nastiest northern weather that Mother Nature has to offer. Wind, rain and snow are no match for this house. The secret is the slope of the bows, heavy wet snow can topple a regular greenhouse, but snow just can’t cling to ours, it slides right off! FRAME
Wire Polylock Package
Crossbrace Package (every 8 feet)
Endwall Frame (one end) EACH
30' x 48' Frame - 4' bow spacing; 3 purlins 30' x 48' Frame - 4' bow spacing; 5 purlins 30' x 96' Frame - 4' bow spacing; 3 purlins 30' x 96' Frame - 4' bow spacing; 5 purlins
Contact your regional account manager custom quote or call 1.800.468.4011 for details on a special quote
30' x 144' Frame - 4' bow spacing; 3 purlins 30' x 144' Frame - 4' bow spacing; 5 purlins
MID-WALL FRAMES
FRAME
Wire Polylock Package
Crossbrace Package (every 8 feet)
Endwall Frame (one end) EACH
30' x 48' Frame - 4' bow spacing;3 purlins 30' x 48' Frame - 4' bow spacing; 5 purlins 30' x 96' Frame - 4' bowspacing; 3 purlins 30' x 96' Frame - 4' bow spacing; 5 purlins
Contact your regional account manager custom quote or call 1.800.468.4011 for details on a special quote
30' x 144' Frame - 4' bow spacing; 3 purlins 30' x 144' Frame - 4' bow spacing; 5 purlins
Need a different length? Call us to quote your CUSTOM length!
132
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
21' & 24' E-zy Grower Gothic Greenhouse 21' Gothic Specifications:
24' Gothic Specifications:
Purlins: 1.315, 18 gauge Gatorshield® tubing
Purlins: 1.315, 18 gauge Gatorshield® tubing
Bows: 1.315, 14 gauge Gatorshield® tubing
21’ Standard-Wall:
Bows: 1.315, 14 gauge Gatorshield® tubing
24’ Standard-Wall:
• Height At Peak: 10’3” • Height 3’ from Side: 5’11” • Groundpost: 36” (4” above ground)
FABRICATION
• Height At Peak: 12’0” • Height 3’ from Side: 6’3” • Groundpost: 36” (4” above ground)
• Poly Width: 32’
• Poly Width: 36’
24’ Mid-Wall:
21’ Mid-Wall:
• Height At Peak: 13’8” • Height 3’ from Side: 7’6” • Groundpost: 54”
• Height At Peak: 11’9” • Height 3’ from Side: 7’5” • Groundpost: 54”
(26” above ground)
(26” above ground) • Poly Width: 36’
• Poly Width: 40’
STANDARD-WALL FRAMES
Frame
Wire Polylock Package
Crossbrace Package (every 8 feet)
Endwall Frame (one end) EACH
21' x 48' Frame - 4' bow spacing; 1 purlins 21' x 48' Frame - 4' bow spacing; 3 purlins 21' x 96' Frame - 4' bow spacing; 1 purlins 21' x 96' Frame - 4' bow spacing; 3 purlins 24' x 48' Frame - 4' bow spacing; 1 purlins
Contact your regional account manager custom quote or call 1.800.468.4011 for details on a special quote
24' x 48' Frame - 4' bow spacing; 3 purlins 24' x 96' Frame - 4' bow spacing; 1 purlins 24' x 96' Frame - 4' bow spacing; 3 purlins
MID-WALL FRAMES
Frame
Wire Polylock Package
Crossbrace Package (every 8 feet)
Endwall Frame (one end) EACH
21' x 48' Frame - 4' bow spacing; 1 purlins 21' x 48' Frame - 4' bow spacing; 3 purlins 21' x 96' Frame - 4' bow spacing; 1 purlins 21' x 96' Frame - 4' bow spacing; 3 purlins 24' x 48' Frame - 4' bow spacing; 1 purlins
Contact your regional account manager custom quote or call 1.800.468.4011 for details on a special quote
24' x 48' Frame - 4' bow spacing; 3 purlins 24' x 96' Frame - 4' bow spacing; 1 purlins 24' x 96' Frame - 4' bow spacing; 3 purlins
Need a different length? Call us to quote your CUSTOM length!
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
133
E-zy Grower Structures Gothic Arch Style
Our E-zy Grower Gothic Arch greenhouse frames are designed to shed heavy wet snows better than any other design. Manufactured from Allied Gatorshield® steel tubing, our frames are built tough to withstand harsh winter weather. Available in three widths; 21', 24', and 30'. All three widths use a standard size of poly covering, which eliminates the annoying task of special ordering poly! Our basic frame package includes bows, ground posts, purlin, kneebraces, hardware, clamps, & instructions. And, as always, custom lengths are not a problem. Simply call our Sales Team for your specialized quote today.
FABRICATION
BOWS 1.66” 14 GA. ROUND STEEL TUBING
Crossbraces w/ Truss
Other items you may need to consider for your new greenhouse structure:
PURLINS 1.315” 17 GA. ROUND STEEL TUBING
• Polyethylene or Polycarbonate covering • Inflation Blower • Horizontal Air Flow (HAF) Fans • Exhaust Fans and Shutter
Ground posts 1.9” 13 gauge
• Heaters • Thermostats • Ground Covering • Benches
4 KNEEBRACES 2 PER END
Greenhouse Package Additions (optional): Call us for a Quick Quote on greenhouse frames or optional packages. We have many packages for you to choose from. Mix & match or let our sales team help you decide. Don’t spend your valuable time trying to figure out which parts you need....
134
CROSSBRACE PACKAGE:
POLY ROLLUP SIDE VENTS:
Simply choose a structure size and pick the packages!
Crossbraces are designed to add extra support to the structure. Steel crossbars are attached with clamps to short truss pieces and hung near the peak of structure at least every other bow. We highly recommend this option especially on any structure that is exposed to adverse weather conditions.
A natural, eco-friendly means of ventilating the greenhouse. Poly is secured onto round steel tubing which rolls up and down guide posts by a gear box at one end and guiding box at the opposite end. We offer specific options within this package to meet your individual operating needs.
SLIDING DOOR PACKAGE:
ENDWALL PACKAGE:
POLY LOCK PACKAGE:
Sold complete or a la carte. Frame is all steel construction which supports aluminum extrusions that secure 8mm polycarbonate. Doors hang from sturdy track, trolley and hardware supplied.
This package can be tailored to your needs. Order the endwall frame only, complete with all the steel and hardware for the gable end. Or you may add poly or rigid 8mm polycarbonate for a permanent clear gable end.
Package includes enough aluminum Poly Spring Lock and Wire Insert to secure poly to base boards at both sides of structure and enough Universal Spring Lock and Wire Inserts to secure poly at both end bows.
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
20’ E-zy Grower Cold Frame
1 or 3 Purlins 1.315” 18 gauge tubing
1.625” Ground Posts 1.315” 14 gauge Bows
FABRICATION
FIG 1 FIG 2 6’
FIG 3
9’
FIG. 1:
Insert end of swedged tubing into standard tubing and secure with a self tapping (tek) screw.
w
o ’B r6 ’, o acing 5 4’, Sp
20’
FIG. 2:
20’ Cold Frame Specifications:
Twisted purlin clamps are used to easily attach the purlin to the bows. No drilling is needed.
Bows: 1.315, 14 gauge Gatorshield® tubing
Purlins: 1.315, 18 gauge Gatorshield® tubing 20’ Standard-Wall:
• Height At Peak: 9’0”, Height 3’ from Side: 6’0” • Groundpost: 72” (48” above ground) • Poly Width: 32’ ground to ground, 24’ eave to eave
FIG. 3:
A round 1/4 clamp is used to attach the purlin to the end bows.
Features:
• Superior structure construction, fast & easy installation • Easily customized to meet your individual needs • 4’, 5’or 6’ bow spacing, 1 or 3 purlin STANDARD-WALL FRAMES
Frame
Wire Polylock Package
Endwall Frame(one end) EACH
20' x 48' Frame - 4' bow spacing; 1 purlin 20' x 48' Frame - 4' bow spacing; 3 purlins 20' x 96' Frame - 4' bow spacing; 1 purlin
Call for Pricing
20' x 96' Frame - 4' bow spacing; 3 purlins 20' x 144' Frame - 4' bow spacing; 1 purlin 20' x 144' Frame - 4' bow spacing; 3 purlins
NOTE: FOR BETTER RIGIDITY, WE RECOMMEND A MINIMUM 4’ SPACING BETWEEN BOWS. WE WILL QUOTE OTHER SPACING OPTIONS AT CUSTOMER’S REQUEST.
Need a different length? Call us to quote your CUSTOM length!
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
135
15' & 20'’ E-zy Grower Winter Chalet
FIG B
Kneebraces
FABRICATION
FIG. C: FIG. B:
20’ Chalet Purlin Clamp
FIG. B:
15’ Chalet Purlin Clamp
FIG C
15’ or 20’ wide
FIG. A:
E-zy Cover Topsoil, Mulch and Salt Bin
w
o ’B r6 ’, o acing 5 4’, Sp
Chalet w/ Concrete Blocks. Call for info & pricing.
FIG A
The E-zy Grower Winter Chalet is designed to protect your valuable nursery stock, perennials, roses, bedding plants and more from snow loads, strong winds and other bad weather. The E-zy Grower Winter Chalet is well engineered for long term economic overwintering, storage and growing space. The 15’ Winter Chalet bow is made of a single piece of curved steel. While the 20’ Winter Chalet bow uses two pieces of curved steel, one side swedged to fit into the other. 15’ WINTER CHALET FRAMES
Frame
15' Winter Chalet Specs:
20' Winter Chalet Specs:
Purlins: 1.315, 18 ga tubing
Purlins: 1.315, 18 ga tubing
Bows: 1”, 14 gauge tubing
• Height At Peak: 7'3" • Height 3' from Side: 5'9" • Groundpost: 24" • (2" above ground) • Poly Width: 24'
Wire Polylock Package
Bows: 1.315”, 14 ga tubing
• Height At Peak: 10'0" • Height 3' from Side: 8'0" • Groundpost: 36" • (2” above ground) • Poly Width: 32'
Endwall Frame(one end) EACH
15' x 48' Frame - 4' bow spacing; 1 purlins 15' x 96' Frame - 4' bow spacing; 1 purlins
Call for Pricing
15' x 144' Frame - 4' bow spacing; 1 purlins 15' x 192' Frame - 4' bow spacing; 1 purlins
20’ WINTER CHALET FRAMES
Frame
Wire Polylock Package
Endwall Frame(one end) EACH
20' x 48' Frame - 4' bow spacing; 1 purlins 20' x 96' Frame - 4' bow spacing; 1 purlins
Call for Pricing
20' x 144' Frame - 4' bow spacing; 1 purlins
Need a different length? Call us to quote your CUSTOM length!
136
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
CALL 800.468.4011 FOR A QUOTE! FABRICATION
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
137
FABRICATION
CALL 800.468.4011 FOR A QUOTE! 138
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
Trac-Rite® Doors Minimal Lead Time
Call Us For a Quote FABRICATION
today!
SO EASY to install, we installed one at our warehouse!
• Easy installation • Low maintenance • Rust-resistant • Smooth, quiet operation • Available for most any door opening with custom sizes up to 16 feet. • 10-year EP3 Spring Warranty • Space guard security latch • Eleven standard pre-finished colors Optional Accessories: • • • • •
Jam Brush Seal Header Draft Stop Hood Factory Installed Insulation Interior Lock
944 Series Pictured prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
139
Quick & E-ZY Sliding Doors Standard Door Size Kits: FABRICATION
3’ x 8’ DOOR Steel Frame Only Track, Trolly, Hardware Polycarbonate Covering & Aluminum Extrusions 4’ x 8’ DOOR Steel Frame Only Track, Trolly, Hardware Polycarbonate Covering & Aluminum Extrusions 5’ x 8’ DOOR Steel Frame Only Track, Trolly, Hardware Polycarbonate Covering & Aluminum Extrusions 6’ x 8’ DOOR Steel Frame Only Track, Trolly, Hardware Polycarbonate Covering & Aluminum Extrusions
NEED A SPECIAL SIZE? NO PROBLEM! We can easily customize almost any size door frame. Call our Sales Team at 800.468.4011 for your personal quote today! 140
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
Rollformed from galvanized steel and can support up to 400 lbs. It is used not only as a door track, but also to construct our E-zy Door Frames.
Door Track
Description
17-630106
6' Door Track
17-630108
8' Door Track
17-630110
10' Door Track
17-630112
12' Door Track
Description
17-620457
Door Hanger for Metal Doors
7" Door Handle
Stay Roll: A compact stay roll which installs at the base of the jamb on each side of the door opening to guide the sliding door during operation. Adjustable for doors up to 2-1/2". Steel w/ lexan wheel. Use 1/4" tek screw or 1/4" bolt with a washer and nut to attach Stay Roll to metal surfaces. Catalog #
Description
17-609300
Stay Roll #93
17-600468
Stay Roll
Single Side Bracket:
An economical nylon-bearing hanger typically used on metal frame doors weighing up to 400 lbs. The drop bolt installs vertically through top frame member of door. Vertical adjustment only. Steel wheels, frame and axles with solid nylon bearings. Catalog #
R
Braskets
Door Hangers Door Hanger:
S
Used for face mounted applications requiring a single run of Track #301. The front of the bracket pivots outward, allowing for easy installation of the Door Track #301. Attaches with a 3/8" hex head bolt with a washer and nut for most applications.
Single Ceiling Bracket #3-301:
Used for ceiling mounted application requiring a single run of Track #301.
Single Corrugated Metal Bracket #7-301:
Typically used on buildings with corrugated metal siding. This bracket is designed to be installed between siding ribs. Slot adjustment allows track to clear ribs up to 1-1/4" high. The triangular bracket provides support for a custom fabricated watershed cover, when required. Catalog #
Description
17-611301
Single Side Bracket
Catalog #
Description
17-613301
Single Ceiling Bracket, #3-301*
17-650700
7� Door Handle 1XMY8
17-617301
Sngl Corrugated Metal Bracket, #7-301*
prices are subject to change without notice
www.waldoinc.com
FABRICATION
Catalog #
Stay Roll 93: For tay ools floor-mounted applications. Includes lag screw and expansion shield. Steel with hard rubber wheel.
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
141
Vent Control Systems
VC-100A Vent Drive
STEP Up Control™
FEATURES
FABRICATION
• 1/20 Horsepower - TENV, Continuous Duty • 115 Volt - 60 Hz - .68 amp #M-1090 (1-3/8”) • 1600 RPM motor; Total gear #M-1092 (1-5/8”) reduction 1900:1; Final output .84 RPM • Output torque 500 in. lb./56 Nm • Lifts up to 75’ of 4’ polycarbonate roof ridge vent or 125’ of 4’ polycarbonate side vent • Thermal overload protection - automatic reset • Quick reversing • Adjustable torque limit switch assembly • Output gear reducer: worm gear with tapered roller bearing on output shaft immersed in synthetic grease • Dual output shaft
VC- 2000 Vent Drive FEATURES
FEATURES
• 6 Stages: 2 stages of heating and 4 stages of cooling - Easily adjust the temp for each stage • 3 set point temp periods - day,night, DIF; auto adjusts based on sunrise and sunset • Modulates vents and curtains • 1 analog output (0 to 10DC or 4-20 milliamps) to control variable-speed fans and modulating valves • Cycle timer • Alarm output • Password protection • Easy to use knob and button interface • Large menu-driven screen displays current temp, time, date, grow weeks, equipment status, etc. • Records the temp in 15-minute increments and stores it for 7 days • Logs and graphs data • High, low and average temperatures • Timed override switches in addition to the manual override toggle switches • Stores settings in the event of a power failure • Optional humidity sensor • Durable corrosion-resistant cabinet: 9.5” x 6.25” x 3.75”
• 1/20 Horsepower - TENV, Continuous Duty • 115 Volt - 60 Hz - 2.5amp #M-1550 (1-3/8”) • 1600 RPM motor; Total gear #M-1555 (1-5/8”) reduction 550:1; Final output 3 RPM • Output torque 1500 in. lb./169 Nm tage ontrol • Lifts up to 325’ of 4’ polycarbonate roof ridge vent or 400’ of 4’ FEATURES polycarbonate side vent • 4 stages of heating or cooling • Thermal overload protection - automatic reset #S-1608 • Solar-shielded temperature • Quick reversing sensor with 75’ of • Adjustable torque limit switch assembly shielded cable • Output gear reducer: worm gear with tapered roller bearing on • LCD screen displays current output shaft immersed in synthetic grease temperature, mode and • Dual output shaft outputstatus • Keypad provides easy operation tep ontrol • Fahrenheit or Celsius scale FEATURES #M-4010 • NEMA 4 enclosure, 9” x 5.5” x 3” • 5 Stages: 2 stages of heating and 3 stages of cooling • Day and night temp settings - simply ini ontrol turn the two knobs to indicate the FEATURES desired temps • 1 stage of heat • Controls most heating andcooling • 3 stages of cooling equipment • LCD display of current • Energy savings through programtemperature, mode and mable lockout of stages output status • Modulating output voltage for proportional steam and hot • Keypad provides easy operation water valves • Set point range: -40° to 220° F • Equipment comes on gradually after a power failure • Durable corrosion-resistant • Color-coded manual override toggle switches cabinet: 16” x 14” x 6” • Replaceable 10 amp DPDT load relays, can operate a wide variety of equipment - these relays reduce the cost of your contactor panel all for current pricing • Durable corrosion-resistant cabinet with locking door protects ll rices are your control : 16” x 16” x 5” • Solar-guarded aspirated temperature sensor and 100’ of cable rvada
4-S
S
C
50A™ C
M STEP™ C
C
142
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
A
F: 419.666.2079
P A
www.waldoinc.com
F.O.B. , CO
#M-4000
.
prices are subject to change without notice
E-ZY Grower Poly Roll-Up Vents
FABRICATION
The E-ZY Grower Roll-up Vent is an economical way of providing seasonal ventilation for both Free-standing and Gutterconnected houses. The design incorporates a manual gear box with brake and locks, which rolls along a fixed guide at one end of the building and a guided bearing installed at the far end. Poly sheeting rolls up and down on a steel roll tube along side the structure at desired length. E-zy Gear Box with Crank Handle:
Our fabricated unit offers user a 10:1 turn ratio for ease of rolling. Specify if using with standard swedge pipe or our E-zy Roll Tube for correct splice connector. Fits 1.315 guide pipe.
Kankit 104:
Complete Roll-Up Vent with E-ZY Roll Tube
Quickly cranks roll-up vent with 4:1 turn ratio. Distinctive green plastic housing fits on 3/4” guide post.
48' Length 96' Length
Roll Tube Choices:
144' Length
1) E-ZY Roll Tube has built-in spring lock track to easily secure poly to tube with zigzagging wire insert. Connector is supplied to join tube pieces end to end for desired vent length. 2) Swedged Roll Tube is 14-gauge steel swedged at the ends to join pieces end to end for desired vent length. Poly is attached with economical poly vent clips or Aluminum lath may be tek screwed as a cap over poly.
Complete Roll-Up Vent with Swedged Roll Tube
48' Length with Aluminum Lath attachment 96' Length with Aluminum Lath attachment 144' Length with Aluminum Lath attachment
Roll-Up Vent Base Unit(specify 10:1 or 4:1 Gear Box) Includes: Gear Box with Crank Handle, Guide Box, Guide Posts, & Hardware *Specify if you have straight or curved greenhouse side walls.
1-4
5-9
$259.00
$239.00
PARTS LIST: Catalog #
Item #
Description
12-403301
RVM301
12-010104
104
12-403303
RVM303
Guide Box
12-403304
RVM304
Crank Handle (for E-zy Gear Box)
12-403319
RVM319
6' Guide Post, 1.315 18ga
12-403321
RVM321
Guide Post L - Bracket
12-403317
RVM317
Swedged Tube Adapter
12-403323
RVM323
Poly Vent Clips Opyion (to secure poly on swedge roll tube)
13-091193
---------
Aluminum Lath 16'1"
12-403316
RVM316
E-ZY Roll Tube Splice
28-997550
---------
Black Web Tape 1 3/4” x 514’
17-111075
---------
#10 x 3/4" Tek Screws for Lath
Gear Box w/ Crank Handle (*specify tube splice adapter) Kankit Gear Box w/ Crank Handle
*Round Splice for Swedged Roll Tube, Square Splice for E-zy Roll Tube. prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
143
E-ZY Grower Roof & Rigid Side Vents
Natural Ventilation
FABRICATION
Our E-zy Grower Vents can be adapted to most structures and work great for replacement of old worn out vents. Made with heavy duty aluminum extrusions and covered with polycarbonate. Our vents will give years of troublefree use. The Ridge Vent is used to allow warm air to rise out through the top of the greenhouse, while cool air comes in through the Side Vent. Both styles are available in custom lengths and widths.
KIT INCLUDES:
• Rigid aluminum frame extrusions • Hardware • Instructions
Call us for your CUSTOM VENT QUICK QUOTE! Polycarbonate SIDE VENT
144
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
Poly ROOF VENT SIDE VIEW
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
PowerRack™
Rack & Pinion Package
CURVED POWERRACK™ MOUNTED ON GREENHOUSE WITH VENT IN A PARTIALLY OPENED POSITION.
Why Curved? The curved PowerRack™ rack & pinion is designed to give additional clearance (54” radius) when space is tight. When a straight rack might interfere with a curtain or aisle, growers find the curved rack to be the answer! Two nylon roller bearings with stainless steel clevis pin axles
Aluminum rack
Precision stamped aluminum housing
Tough nylatron bearings Zinc pinion gear with stainless steel knurled cup point set screws
Zinc sash bracket
FABRICATION
Can you see the difference? Successful growers can. It’s the unrivaled quality built into every PowerRack™ rack and pinion. While some rack arms are dry cut, the teeth on Wadsworth’s PowerRack™ arms are cut under an oil bath to minimize sharp edges and assure smooth operation. The holes in the pinion housing are punched with a precision stamping tool to maintain exact spacing. All clevis pins, cotterpins and set screws are made from quality stainless steel.
PowerRack™ Features:
• Wide load-bearing surfaces. • Replaceable Parts: Every part is replaceable using ordinary hand tools. • Freedom from corrosion: Aluminum rack and housing, zinc pinion gear, tough nylatron bearings. Easy alignment: Rack works even when it’s not perfectly square with vent. • Economically priced.
PowerRack Packages: Complete with rack, pinion with housing and sash bracket Item # 1-3/8"
Item # 1-5/8"
STRAIGHT RACK
M-2636
M-2736
36" PowerRack Package w/ straight rack
M-2642
M-2742
42" PowerRack Package w/ straight rack
M-2648
M-2748
48" PowerRack Package w/ straight rack
M-2653
M-2753
53" PowerRack Package w/ straight rack
M-2666
M-2766
66" PowerRack Package w/ straight rack
M-2672
M-2772
72" PowerRack Package w/ straight rack
Item # 1-3/8"
Item # 1-5/8"
CURVED RACK
M-2836
M-2936
36" PowerRack Package w/ curved rack
M-2842
M-2942
42" PowerRack Package w/ curved rack
M-2848
M-2948
48" PowerRack Package w/ curved rack
M-2853
M-2953
53" PowerRack Package w/ curved rack
M-2866
M-2966
66" PowerRack Package w/ curved rack
M-2872
M-2972
72" PowerRack Package w/ curved rack
CLOSEUP OF MOUNTED POWERRACK™ SASH BRACKET
Shaft Hangers
Used to hold roll tube shaft on rack and pinion vent systems. Place every 4-6 foot. Available in 2 sizes: 1-3/8” and 1-5/8”. Catalog#
All PowerRack Packages are special ordered, please allow ample time for delivery. 1-5/8" Shaft Opening (1.66 tubing) is also available, please request when ordering. All prices are FOB Arvada CO.
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
CLOSEUP OF MOUNTED POWERRACK™
Description
12-130016
Shaft Hanger, (for 1.315 OD)
12-110006
#S2806 Universal Shaft Hanger, 1-3/8"
12-110008
#S2808 Universal Shaft Hanger, 1-5/8"
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
145
Now individual greenhouse computer based control functions are available in a low cost, easy to install, package. Advanced features include a large display, easy to use programming switches, and a lockable weatherproof enclosure. Will hold and display the high and low sensor readings for the past 24 hours. Separate day, night, and DIF settings are standard. 24 VAC low voltage operation, and include applicable sensors and cables. The Ventstat will operate any motorized greenhouse vent, roll-up, or retractable roof system. Up to eight stages of operation. Separate day, night, and DIF settings.
Growstat Control Series
FABRICATION
Operates Greenhouse Vent Motors Controls Retractable Roofs Automates Side Roll Ups
The Hawk Automated Controller The Hawk Controller is unique in design as it operates on both temperature and time, which eliminates constant opening and closing. The Hawk Controller gives you complete control, allowing you to set at what temperatures the vent will open and for how long. The Hawk controller is very accurate, opening the vent from one inch to six foot and will stay open for the amount of time you specify. The program may be easily changed to meet your needs throughout the season.
For Roof & Side Roll-Up Vents
Controller • 110 volt or 220 volt • Celsius or Fahrenheit • Digital readout controller • Accurate to one-tenth of one degree • Manual over-ride switches • May extend sensor up to 500'
Motor • Self contained • Weather resistant seals • Electric brakes included 2 year warranty • Uses only 3 amps • 110 volt thermally protected motor • The Roll-Up motor will operate up to 300' on either curved or flat walls. • The Roof Vent motor will operate up to 250' of vent. Catalog #
Description
12-160-102
Roll-Up Vent Operator
12-160-101
Roof Vent Operator
12-160-100
Controller
*F.O.B. OH MFG
146
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
Monorail Assembly Parts
Rail Stops (for rail supports) Used to stop and collect trolleys or
Catalog #
Dimensions A
B
C
D
E
101
1-5/18"
4-7/8"
1-1/8"
1"
1-3/4"
1/4"
F
Wt/100 Pcs
Pcs/ Carton
1/2"
62 lbs
100
Two wheel trolley head: 1" wide steel wheels
Rail Supports
Designed for 3/4" pipe drop used with 1-5/16" (1.315) rail tubing.
0030
Dimensions
3/4"
1/2"
C
4-1/4"
D
6-5/8"
1"
E
Load Cap.
F
2"
1-1/8"
750 lbs
Mat'l
Wt/ 100 Pcs
Steel
80 lbs
Close Rail Supports
2103
Dimensions A
B
C
D
E
1/2"
1-15/16"
5-3/8"
2-11/16"
3/16"
Load Cap.
Mat'l
Wt/ 100 Pcs
500 lbs
Steel
160 lbs
Speed Rail & Speed
SPEED RAIL: Tubing swedged on one end used as rail for monorail cart to travel on. 1.315, 14 gauge galvanized steel. SPEED CURVE: 1.315, 14 gauge galvanized steel tubing. Length: 6' long, swedged on one end. Use one 57째 curve w/ curved switches to give a 90째 turn.
Single Arm Brackets
Uses U-Bolt to lock any type of upright support without slipping. Part #
Size I.P.S.
Monorail Cart w/ 5 Shelves
Dimensions A
B
C
D
E
F
Wt. per 100 Pcs.
SHELVES & INSERTS
18-026000
Monorail Shelf Frame Only
20-020699
Expanded Metal Shelf Inserts - 6' x 2'
29-186024
Polycarbonate Shelf Inserts - 6' x 2'
SWITCHES
18-502710
#2710R Right Curved Lever Switch
18-512710
#2710L Left Curved Lever Switch
18-242800
#2810R Right Drop-Off Curved Switch
18-452810
#2810L Left Drop-Off Curved Switch
18-242900
#2910 Straight Lever Switch
18-242610
#2610 Straight Drop-Off Switch
18-222151
#2151 Master Switch, crss thru manual
18-230201
#2010RI Right Inside Master Switch
18-231201
#2010LI Left Inside Master Switch
n/a
#2010RO Right Outside Master Switch
n/a
#2010LO Left Outside Master Switch
18-262000
#2751 Knife Switch (R-7) 20" Long
18-212851
#2851 Removable Bar Switch - 24" Long
Catalog #
This Close Rail Support bolts directly to angle iron, underside of beams and door frames. Used where other pipe suspensions are not practical. Part #
18-050000
Catalog #
Trolley Heads
B
Monorail Cart w/ 4 Shelves
BRACKETS
18-492401
Single Arm Bracket #2401
18-492402
Single Arm Bracket #2402
18-492403
Single Arm Bracket #2403
18-492404
Single Arm Bracket #2404
18-492405
Single Arm Bracket #2405
18-492406
Single Arm Bracket #2406
18-492407
Single Arm Bracket #2407
18-492410
Single Arm Bracket #2410
Catalog #
CLAMPS & MORE
18-992111
#2111 Strap Clamp
18-900031
Steel Clamp Set #0031
18-900032
Steel Clamp Set #0032
18-900033
Steel Clamp Set #0033
18-900034
Steel Clamp Set #0034
18-900035
Steel Clamp Set #0035
18-900136
Steel Clamp Set #0036
18-721000
#C15540 Two Wheel Trolley Head
18-800300
Rail Support #C00300
2401
1"
1-7/8"
1/2"
7-1/4"
1-3/4"
9"
1-5/16"
235 lbs.
2402
1"
1-7/8"
1/2"
10-1/4"
1-3/4"
12"
1-5/16"
300 lbs.
2403
1"
1-7/8"
1/2"
11-3/4"
1-3/4"
13-1/2"
1-5/16"
315 lbs.
18-881010
Rail Stop #1010
2404
1"
2-1/8"
1/2"
13-1/4"
1-3/4"
15"
1-5/16"
335 lbs.
18-882103
Close Rail Support #2103
2405
1-1/4"
1-7/8"
1/2"
10-1/4"
1-3/4"
12"
1-21/32"
305 lbs.
18-545000
45 degree Speed Curve
2406
1-1/4"
1-7/8"
1/2"
11-3/4"
1-3/4"
13-1/2"
1-21/32"
320 lbs.
2407
1-1/4"
2-1/8"
1/2"
13-1/4"
1-3/4"
15"
1-21/32"
350 lbs.
18-557000
57 degree Speed Curve
2410
2"
2-1/8"
1/2"
13-1/4"
1-3/4"
15"
2-3/8"
370 lbs.
18-590000
90 degree Speed Curve
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
FABRICATION
Tube Size
A
Monorail Cart w/ 3 Shelves
18-040000
Catalog #
Part #
Size I.P.S.
18-036000
NOTE: Does not include shelf bottoms (Frame Only)
hangers on rails at desired points.
Part #
CARTS
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
147
Gatorshield Steel Tubing
FABRICATION
ROUND STEEL TUBING Catalog #
Size
Gauge
Bundle Qty.
14-108288
1” x 24’
18
127
14-104288
1” x 24’
14
127
14-148195
1.315” x 16’ 3”
18
91
14-148288
1.315” x 24’
18
91
14-144171
1.315” x 14’ 3”
14
91
14-144187
1.315” x 15’ 7”
14
91
14-144243
1.315” x 20’ 3”
14
91
14-144288
1.315” x 24’
14
91
14-183288
1.625” x 24’
13
61
14-204234
1.66” x 19’ 6”
14
61
14-204288
1.66” x 24’
14
61
14-283288
1.9” x 24’
13
61
ROUND SWEDGED STEEL TUBING Catalog #
Size
Gauge
Bundle Qty.
14-508288
1” x 24’
18
127
11-600195
1.315” x 16’ 3”
18
91
14-544243
1.315” x 20’ 3”
14
91
14-204234
1.66” x 19’ 6”
14
61
Catalog #
Size
Gauge
Bundle Qty.
15-108288
1” x 24’
18
160
15-204240
1.25” x 20’
14
121
15-204288
1.25” x 24’
14
121
15-306288
1.5” x 24’
16
81
15-402288
1.75” x 24’
12
25
15-505288
2” x 24’
15
25
SQUARE STEEL TUBING
RECTANGULAR STEEL TUBING
148
Catalog #
Size
Gauge
Bundle Qty.
16-106240
1” X 2” x 20’
16
96
16-106288
1” X 2” x 24’
16
96
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
Aluminum Profile/Extrusions Quick Lock Male Insert
The stainless steel wire insert, which is sotimes called a spring, will not change its’ holding characteristics even with repeated use. When installing, simply pull the material across the base channel, and snap the soft wire insert into place to secure the material.
Catalog #
Description
Catalog #
Description
13-041048
4' Quick Lock Male Insert
13-052048
4' Stainless Steel Wire Insert
Wire Poly Lock
Quick Lock Base / Double & Single
Recommended for use with double layer inflated poly only.
Quickly and easily attach and replace double layer poly on your greenhouse frame with our rigid locking system. Use Single Quick Lock Base to attach poly to baseboards at the sides and ends of your greenhouse. We recommend ¼” x 1” hex head bolts w/ nuts for attaching Single Quick Lock Base to a steel frame.Our Double Quick Lock Base is designed for use at the top of an Ezy-Grower Roll-up side vent to secure both roof and side wall poly in one base track. The double base is rigid enough to be attached across greenhouse bows (up to 5’ spacing) with out horizontal support. Use #10 x ¾” tek screws to attach to steel framing or ¼” size bolts when attaching to wood. Both Single and Double Quick Lock Bases are used in conjunction with Quick Lock Male Insert described above. Double Quick Lock
Use the steel Wire Poly Lock extrusion to secure poly along baseboards and along the curve of bows. We suggest hat two springs be used for added strength in windy areas. Wire Poly Lock can be attached to most steel greenhouse frames. Secure with 1/4" x 1" tek screws every 18" when attaching extrusion to steel baseboards or bows. It is recommended to use ¼" hex bolts with nuts when attaching extrusion to Greenhouse Frame. Catalog #
Description
13-061144
12' Wire Poly Lock Base
13-061288
24' Wire Poly Lock Base
Universal Spring Lock
Single Quick Lock
Catalog #
Description
Universal Spring Lock easily, neatly and inexpensively finishes end walls. It securely attaches poly or shade cloth to any round, oblong or square tubing and allows for 8mm polycarbonate or ‘raised rib’ sheets under its cap.
13-031144
12' Double Quick Lock Base
13-031288
24' Double Quick Lock Base
Catalog #
Descriptions
13-021144
12' Single Quick Lock Base
13-071240
20' Universal Spring Lock
13-021288
24' Single Quick Lock Base
13-071288
24' Universal Spring Lock
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
prices are subject to change without notice
FABRICATION
For use with Single & Double Quick Lock Base. The Quick Lock Male Insert turns easily into the Quick Lock Base to hold two layers of greenhouse poly cover. Poly is securely locked after air is inflated between the two poly layers to ‘seat’ the insert. When the time comes to change out poly a quarter turn of the insert is all you need to release it from the base.
Wire Insert
www.waldoinc.com
F: 419.666.2079
149
Large H Profile
FABRICATION
Use the 8mm aluminum Large H profile to splice two pieces of polycarbonate together on any flat surface. The Large H profile can be attached to most steel greenhouse frames with 1/4” x 1" tek screws.
Catalog #
Description
13-101144
12' Large H Aluminum Profile
13-101288
24' Large H Aluminum Profile
Bar Base & Bar Cap
Bar Base and Bar Cap are used together to form a two-piece profile similar to the Large H profile. The advantage of having two separate pieces is that it makes attaching polycarbonate to a curved surface much easier. Bar Base can be attached to most steel greenhouse frames with #10 x 3/4" or 1/4" x 1" tek screws. Use Phillips PanHead Screws 1/2” long to attach BarCap to the Base every 12” to 18”.
Small h Profile
Use the 8mm aluminum Small h profile to attach and seal edges of polycarbonate to a structure. The Small h profile can be attached to most steel greenhouse frames with #10 x 3/4" tek screws.
Catalog #
Description
13-121290
24'2" Bar Base Aluminum Profile
13-131312
26' Bar Cap Aluminum Profile
Universal Spring Lock Catalog #
Description
13-111144
12' Small H Aluminum Profile
13-111288
24' Small H Aluminum Profile
Aluminum U-Channel
Used with Bar Base to seal top and bottom edge of polycarbonate sheets.
Catalog # 13-141144
12' Aluminum U-Channel
13-141288
24' Aluminum U-Channel
The stainless steel wire insert, which is sotimes called a spring, will not change its’ holding characteristics even with repeated use. When installing, simply pull the material across the base channel, and snap the soft wire insert into place to secure the material.
Descriptions
13-071240
20' Universal Spring Lock
13-071288
24' Universal Spring Lock
Economical answer to attaching poly to round tubing! Aluminum Lath is used on the end bows of a steel greenhouse structure or an inexpensive alternative for attaching poly to roll tube for poly roll-up vents. Use 1/4" x 1" tek screws every 18" to secure.
Catalog #
Catalog #
Description
13-052048
4' Stainless Steel Wire Insert
Waldo & Associates, Inc Grower Supply Catalog
Catalog #
Aluminum Lath
Description
Wire Insert
150
Universal Spring Lock easily, neatly and inexpensively finishes end walls. It securely attaches poly or shade cloth to any round, oblong or square tubing and allows for 8mm polycarbonate or ‘raised rib’ sheets under its cap.
P: 800.468.4011
13-091193 F: 419.666.2079
Description 16'1" Aluminum Lath
www.waldoinc.com
prices are subject to change without notice
Quick Lock Base /Double & Single
Wire Poly Lock
Recommended for use with double layer inflated poly only.
Double Quick Lock
Single Quick Lock
Catalog #
Description
13-031144
12' Double Quick Lock Base
13-031288
24' Double Quick Lock Base
13-021144
12' Single Quick Lock Base
13-021288
24' Single Quick Lock Base
Poly Vent Spring Lock
Catalog #
Description
13-061144
12' Wire Poly Lock Base
13-061288
24' Wire Poly Lock Base
Quick Lock Male Insert
For use with Single & Double Quick Lock Base. The Quick Lock Male Insert turns easily into the Quick Lock Base to hold two layers of greenhouse poly cover. Poly is securely locked after air is inflated between the two poly layers to ‘seat’ the insert. When the time comes to change out poly a quarter turn of the insert is all you need to release it from the base. Catalog #
Description
13-041048
4' Quick Lock Male Insert
Universal Vent Rail
Used at the bottom edge of a poly vent. Unique position of channel allows water to pass over vent seal area. Fits 1-1/4” square steel vent arms.
Universal Vent Rail is used at the bottom edge of both side and roof vents to create a water-tight seal. It has been specially designed to be used with Universal Slam Rail. Add Wire Inserts (Springs) only on vents using greenhouse plastic, Wire Inserts are not needed for polycarbonate vents.
Catalog #
Description
Catalog #
Description
13-081144
12' Poly Vent Spring Lock
13-221144
12' Universal Vent Rail
13-081288
24' Poly Vent Spring Lock
13-221288
24' Universal Vent Rail
prices are subject to change without notice
www.waldoinc.com
FABRICATION
Quickly and easily attach and replace double layer poly on your greenhouse frame with our rigid locking system. Use Single Quick Lock Base to attach poly to baseboards at the sides and ends of your greenhouse. We recommend ¼” x 1” hex head bolts w/ nuts for attaching Single Quick Lock Base to a steel frame. Our Double Quick Lock Base is designed for use at the top of an Ezy-Grower Roll-up side vent to secure both roof and side wall poly in one base track. The double base is rigid enough to be attached across greenhouse bows (up to 5’ spacing) with out horizontal support. Use #10 x ¾” tek screws to attach to steel framing or ¼” size bolts when attaching to wood. Both Single and Double Quick Lock Bases are used in conjunction with Quick Lock Male Insert described above.
Use the steel Wire Poly Lock extrusion to secure poly along baseboards and along the curve of bows. We suggest hat two springs be used for added strength in windy areas. Wire Poly Lock can be attached to most steel greenhouse frames. Secure with 1/4" x 1" tek screws every 18" when attaching extrusion to steel baseboards or bows. It is recommended to use ¼" hex bolts with nuts when attaching extrusion to Greenhouse Frame.
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
151
F-Rail
FABRICATION
Used in framing bench tops with expanded metal. No more exposed edges on expanded metal benches.
Catalog #
Description
13-321288
24' F Rail
Universal Slam Rail
Universal Slam Rail is used with Universal Vent Rail to create a water-tight seal. The profile has been cleverly designed to seal both the vent and the greenhouse poly, thus cutting down on the expense of using two extrusions! Attach Universal Slam Rail to bows or outside purlins with bolts every 18". Catalog #
Description
13-231288
24' Universal Slam Rail
Male Hinge
The Male Hinge is used with the Female Hinge to complete the movable ‘hinge’ on our E-zy Grower Vents. This ‘hinge’ that is created when the two profiles are joined together is the mechanism that allows the vents to open and close. No additional hardware is needed for assembly due to the self-locking design of the Male Hinge. Catalog #
Description
13-191288
24' Male Hinge
E-zy Roll Tube
Our aluminum tube is designed with a built-in track to allow for easy installation of poly for poly roll-up vents. Simply secure poly in track with stainless steel wire (spring) insert. Need to change the poly? Just remove the spring, add a new piece of poly and put the old spring back in.
Female Hinge
318
#RVM
The aluminum Female Hinge has been specifically designed for the E-zy Grower Side Vent. When used with the Male Hinge it creates a movable profile (hinge) that allows the vent to swing open or closed. Attach Female Hinge to steel support with 1/4" x 1" tek screws every 18". Catalog #
Description
13-181288
24' Female Hinge
16
3 #RVM
Need to vent? Our E-zy Grower Roof & Side Vent Kits make it easy! Check out the details on pages and .
152
Waldo & Associates, Inc Grower Supply Catalog
17
3 #RVM
P: 800.468.4011
Remember to order Splice for Roll Tube Extension! Catalog #
Description
12-403316
E-ZY Roll Tube Splice #RVM316
12-403317
E-ZY Roll Tube Drilled Adapter #RVM317
12-403318
E-ZY Roll Tube Insert #RVM318
13-052048
4' Spring Insert Only
13-291144
12' E-ZY Roll Tube
13-291288
24' E-ZY Roll Tube
12-403316
E-ZY Roll Tube Splice #RVM316
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
Tek Screws
Wing Nuts
Self drilling screw for aluminum and steel. Catalog #
Catalog #
Description
Description
#10 X 1/2" Tek Screw
17-235600
5/16" Zinc Wing Nut
17-111075
#10 x 3/4" Tek Screw
17-262500
1/4” Zinc Wing Nut
17-112510
1/4" x 1" Tek Screw
17-263800
3/8” Zinc Wing Nut
17-112511
1/4" x 1" Tek Screw & Washer
17-112515
1/4" x 1.5" Tek Screw
17-112516
1/4" x 1.5" Tek Screw & Washer
17-112520
1/4" x 2" Tek Screw
Carriage Bolts
Smooth round head for appearance, security and safety. Measure from underside of head to tip of bolt.
Wood-tite Screws (hex head) For fastening profiles directly to wood members.
Catalog #
Description
17-022510
1/4" x 1" Carriage Bolt
17-022515
1/4" x 1.5" Carriage Bolt
Description
17-022520
1/4" x 2" Carriage Bolt
17-130915
#9 1/4" x 1-1/2"
17-022522
1/4" x 2.25" Carriage Bolt
17-022525
1/4" x 2.5" Carriage Bolt
17-022530
1/4" x 3" Carriage Bolt
17-022545
1/4" x 4.5" Carriage Bolt
17-222550
1/4" x 5" Carriage Bolt
17-022560
1/4" x 6" Carriage Bolt
17-023825
3/8" x 2.5" Carriage Bolt
17-025610
5/16" x 1" Carriage Bolt
17-025620
5/16" x 2" Carriage Bolt
17-025625
5/16" x 2.5" Carriage Bolt
Use flat washers for general use. Use fender washers where a large outer diameter is required.
Catalog #
Description
17-302500
1/4" Flat Washer
17-303800
3/8" Flat Washer
Permaseal Washers
Used to help seal around screw holes on polycarbonate sheets. Catalog # 17-351180
1-1/8" Permaseal Washer
For general purpose applications. Most commonly used nut. Use lock nuts where vibration my cause loosening. Description
17-212500
1/4" Hex Nut
17-205600
5/16" Hex Nut
17-203800
3/8" Hex Nut
17-263800
3/8” Lock Nut
17-262500
1/4” Lock Nut
prices are subject to change without notice
www.waldoinc.com
Hex Head Bolts
Common grade for general purpose fastening. Measure from the underside of head to tip of the bolt.
Description
Hex Nuts Catalog #
Price revised 10/20/2015
Catalog #
Washers
FABRICATION
17-111005
F: 419.666.2079
Catalog #
Description
17-002507
1/4" x 3/4" Hex Head Bolt
17-002515
1/4" x 1.5" Hex Head Bolt
17-002520
1/4" x 2" Hex Head Bolt
17-002525
1/4" x 2.5" Hex Head Bolt
17-002530
1/4" x 3" Hex Head Bolt
17-003815
3/8" x 1.5" Hex Head Bolt
17-003825
3/8" x 2.5" Hex Head Bolt
17-003835
3/8" x 3.5" Hex Head Bolt
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
153
Base Plate
Used for E-ZY Grower Greenhouses constructed on black top/ concrete surfaces. Catalog #
Description
17-710000
6" x 6" Base Plate
U Bolts
Attaches wind/knee braces to our E-zy Grower Greenhouses. The 1.315 U Bolt is used on our 15', 20', 21' & 24' houses (1.315 tubing). The 2" U Bolt is used on our 30' house (1.66 tubing). Catalog #
FABRICATION
Eye Bolts
Price revised 10/20/2015
Used on E-zy Grower Gutter Connect houses, Gothic (curved) Roll-up Vents or anywhere a rope or cable needs to be attached. Catalog #
Description
17-093845
3/8" x 4-1/2" Eyebolt
17-095625
5/16” x 2 1/2” Eyebolt
Description
17-982304
4" T.D. Mending Plate
17-982308
8" T.D. Mending Plate
Used to attach the wheels to our E-zy Grower Carts and also used on our curved roll-up vents.
154
Description
17-422400
2-1/2" Hairpin/Cotter Key
Waldo & Associates, Inc Grower Supply Catalog
U Bolt Kit, 1-3/4" x 3" x1/4" w/ backplate and 2 nuts
17-080299
U Bolt Kit, 2" x 3-1/4" x1/4" w/ backplate and 2 nuts
For attaching tubing bows to endwall. Available for wood 2x4 & 1½ square metal tubing. Includes bolt and nut.
Cotter Key Catalog #
17-081799
Endwall Bracket & Brace Bands
T.D. Mending Plates
Catalog #
Description
Catalog #
Description
17-801300
Brace Bands, 1-3/8" HD13010
17-801500
Brace Bands, 1-5/8" HD13020
17-800200
Brace Bands, 2" HD13030
17-470000
Wood End Bracket
Phillips Pan Head Screws Used to fasten steel splices and steel corners on our E-zy Grower Benches and attaching bar cap to bar base.
P: 800.468.4011
Catalog #
Description
17-171005
#10 x 1/2" Phillips Pan Head Screw
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice
Splice
Vertical Closure Strip
Used to splice two pieces of frail together on long bench runs. Catalog #
Description
17-980206
2" x 6" Splice
Polyurethane strip used to seal pieces of corrugated polycarbonate sheets along straight side. Also seals vents at opening.
Catalog #
Description
12-403305
Crank Handle for E-ZY Grower Gear Box RVM303
12-010104
Kankit Grearbox w/ crank handle
Vertical Closure Strip, 3/4"x1"x40"
Lockups Price revised 10/20/2015
Quickly cranks roll-up vent with 4:1 turn ratio. Distinctive green plastic housing fits on 3/4” guide post. Description
29-823140
Lockups are designed for connecting purlin and bows and are also excellent for building bench frames, sidewall ventilation vent headers and anywhere there is a need for perpendicular pipe connection. No screws or electrical tools are needed, simply hammer to install by inserting the wedge and tapping. Easy to disassemble if needed. Made of galvanized steel it will not stretch or expand under pressure like aluminum.
Kankit Gearbox with Crank handle
Catalog #
Description
FABRICATION
Crank Handle
Catalog #
Roll Up Vent Bracket Holds Guide Post to Greenhouse Baseboard and Bow.
Catalog #
Description
17-961313
1.315” x 1.315” Lockup
Catalog #
Description
17-961315
1.315” x 1.66” Lockup
12-403321
Roll Up Vent Bracket - RUM321
17-961319
1.315” x 1.90” Lockup
prices are subject to change without notice
www.waldoinc.com
F: 419.666.2079
P: 800.468.4011
Waldo & Associate, Inc 2015 Grower Supply Catalog
155
Cross Connectors w/ Hardware
Bench Clamps w/ Hardware
Round or square varieties.
FABRICATION
Used to attach purlins. The 1-3/8" x 1-3/8" is used for our 20', 21', and 24' greenhouses. The 1-5/8" x 1-3/8" is used on our 30' greenhouses. Catalog #
Catalog #
Description
17-970101
Cross Connectors, 1" x 1"
17-971313
Cross Connectors, 1-3/8" x 1-3/8"
17-971513
Cross Connectors, 1-5/8" x 1-3/8"
Tension Bands
USE 5/16” x 2” Carriage Bolt & Nut Description
17-811300
Tension Bands, 1-3/8" HD11010
17-811500
Tension Bands, 1-5/8"
1" Round Aluminum Bench Clamp
17-951313
1-3/8" Round Aluminum Bench Clamp
17-951212
1-1/4" Square Aluminum Bench Clamp
17-951113
1” x 1-3/8 Rd Aluminum Bench Clamp w/hardware
17-950112
1” Rd x 1-1/4 Sq Aluminum Bench Clamp w/ hardware
17-951312
1-3/8” Rd x 1-1/4 Sq Aluminum Bench Clamp w/ hardware
Three way clamp used on ends to connect tubing together at perpendicular angles. USE 5/16” x 2” Carriage Bolt & Nut
Catalog #
Brace Bands
Used to attach truss rods, crossbraces to our E-zy Grower Greenhouses. USE 5/16” x 2” Carriage Bolt & Nut Catalog #
17-950101
Split T
Used on greenhouse endwalls to fasten 2 pieces of steel together.
Catalog #
Description
17-801300
Brace Bands, 1-3/8" HD13010
17-801500
Brace Bands, 1-5/8" HD13020
17-800-00
Brace Bands, 2" HD13030
Use the 1-3/8" Round quarter clamps to hold purlins to the first and last bow. Use the 1-1/ 4" Square quarter clamps in endwall construction. USE 1/4” x 1” Tek Screws
Description
17-921313
Split T, 1-3/8" x 1-3/8" HD2711
17-921513
Split T, 1-5/8" x 1-3/8" HD27121
17-921515
Split T, 1-5/8" x 1-5/8" HD27122
Steel Bench Corner Used to finish off bench top corners on our E-zy Grower Benches. Catalog # 17-701040
Quarter Clamps
Description Steel Bench Corner
Strap Clamps
These clamps are great for fastening to baseboards without any drilling. Sizes: 1.315”, 1.625”, 1.9”. USE 1/4” x 1” Tek Screws Catalog #
Description
Description
18-992110
Strap Clamp 1" w/ 2 holes
17-821300
Quarter Clamps, 1-3/8" Round
18-992111
Strap Clamps, 1-1/4" w/ 2 holes
17-821200
Quarter Clamps, 1-1/4" Square
18-992112
Strap Clamps 1-1/2" w/ 2 holes
Catalog #
156
Description
Waldo & Associates, Inc Grower Supply Catalog
P: 800.468.4011
F: 419.666.2079
www.waldoinc.com
prices are subject to change without notice