VA-Vol-34-No-11-Nov-2006

.... ..J

~

.(

[k:

I !~_ a.

-----足

RPLANE VOL. 34, No. 11

OVEMBER

2006

CONTENTS 1

Straight & Level

by Geoff Robison

2

VAA News

4

The Amazing Brazilian

Alberto Santos-Dumont and his 14 bis

by H.G. Frautschy

10

"Follow the Swallow!"

Sharing a family's history

by Sparky Barnes Sargent

16

Grove Disc Brake Conversion

Keep those 8.00-4s rolling ... and stopping!

by Sparky Barnes Sargent

26

More of the World's Greatest

Aviation Celebration

VAA Area

by H.G. Frautschy

34

The Vintage Instructor

Survival

by Doug Stewart

36

Mystery Plane

by H.G. Frautschy

38

Classified Ads

39

Calendar

COVERS FRONT COVER: Charlie Laird is the great-great uncle and great-great grandson of famous avia­ tion siblings Emil Matthew "Matty" Laird and Charles Lawrence Laird Sr.. who were instrumen­ tal in designing and manufacturing numerous Swallow aircraft. Charlie and his family are thrilled to own and fly this 1927 OX-5 powered Swallow biplane. It was chosen as the 2006 Antique Bronze Lindy, Golden Age (1918-1927) winner. For more on this handsome aircraft and it's fa­ mous family, read the story by Sparky Barnes Sargent starting on page 10. BACK COVER: The type says it all, but we'lI repeat it, since we really can't say it often enough: Thanks Volunteers! Over 400 people volunteer in the VAA area during EAA AirVenture, both on the flightline and behind the scenes. Volunteer VAA photographer Steve Moyer managed to herd this clowder of cats just long enough to snap their picture before they all scampered off to help their fellow members.

STAFF

EAA Publisher EAA Editor-in-Chief Executive Director/Editor Administrative Assistant Managing Editor News Editor Photography

Tom Poberezny Scott Spangler H.G. Frautschy Jennifer Lehl Kathleen Witman Ric Reynolds Jim Koepnick Bonnie Bartel Kratz Advertising Coordinator Sue Anderson Classified Ad Coordinator Louise Schoenike Copy Editor Colleen Walsh Director of Advertising Katrina Bradshaw Display Advertising Representatives: Northeast: Allen Murray Phone 856·220-7180, FAX 856-229-7258, e-mail: Clllemllllrml'ii'mil/(lsprillg.com Southeast: Chester Baumgartner Phone 727·532-4640, FAX 727·532·4630, e·mail: cbmllnlll @milldspring.com Central: Todd Reese Phone 800-444-9932, FAX 816-741·6458, e-mail: todd@Spc·mag.com Mountain & Pacific: Keith Knowlton & Associates Phone 770-516-2743, e-mail: kekllowltoll(jilmimlspril1g.com

GE OFF ROBISON PRESIDENT, VINTAGE AIRCRAFT ASSOCIATION

Protecting our right to fly

The fall weather around here has quickly turned to the beginnings of winter-like conditions. On my way home from the hangar last night, I actu­ ally saw some light snow flurries. Yikes! Where did the fall season go? Heck, the trees never even became brightly col­ ored. They started to turn, and then the wind came along and blew them right off the trees. I really felt a little cheated, but I don't know quite who to blame, Mother Na­ ture or Old Man Winter. I can't yell at Mother, and I don't dare get in Old Man Winter's face, because the payback could be painful! So, I guess we just hunker down and hope for the best. We continue to face serious chal­ lenges to our individual rights to pursue aviation as a recreational vocation. I use the term vocation here, because it is ap­ propriate to me, and I'll bet for many of you, too. I learn something about my­ self or my aircraft every time I fly. The practices and mannerisms of the "drive-by" media we observe nearly every day now have created a real hys­ teria among the uninformed, nonavia­ tion-oriented individuals who read the newspaper and watch the television news every day. Not all, but a fair share, of these "news hawks" are now sensa­ tionalizing the news to a degree that I must label their "work" as irresponsible. We are fortunate as an organization to have the ability to dispute the ridicu­ lous and espouse the realities of general aviation that the general public really has no conception of. All they know is, "I read it in the newspaper, so it must be true and ac­ curate." We are fortunate to have strong media contacts and an informed staff who regularly work hard at getting

our message out and setting the record straight. The perfect example of what I am re­ ferring to, of course, is the recent trag­ edy in New York that involved a small general aviation aircraft striking an apartment building. Somebody please tell me why is it considered acceptable media practice to raise the notion that this unfortunate"accident" was any­ thing other than an accident? As you know and observed, the media imme­ diately played the "terrorism card." I know, we are talking about an airplane and New York City all in one notion, but come on guys, let's get it right. It was an apartment building and a small airplane, not the Pentagon, not the White House, not a 767. It was an un­ fortunate accident, nothing more. The only terror in play with this scenario was with the "uninformed" who heard the media play the terrorism card, and they became terrorized by the thought implanted by the media that the terror­ ists had possibly returned to New York City. Even the mayor of New York (a pilot, I understand) was reminding the media there that it was an accident, but nothing more. This is so unfortunate for so many reasons, and it forces one to ask the real question of "Who regulates the media?" We all know, of course, that no one re­ ally regulates them but us. This is still a country that enjoys the right of free speech. We regulate them by not buy­ ing their newspapers, or by watching an old rerun of I love Lucy in lieu of the nightly news. I am gravely concerned here about what we may be facing next in the way of regulatory response in the aftermath of these events. I know our "favorite

mayor" from the city along the big lake I fly by going to Oshkosh is absolutely salivating over these events. Be assured he is no friend to recreational aviators. If he had his way, I would have to fly to Minnesota to stay out of "his" airspace on my way to Oshkosh. So how should we as pilots deal with these issues? I think our best response is to continue to support the advo­ cacy groups like EAA, who will forever be vocal and demanding of the regula­ tors to ensure our rights are properly considered. We need to continue to strengthen our efforts to create more consensus-building amongst the lead­ ers of the aviation alphabets in an ef­ fort to reinforce the battlefront, not only for airspace issues, but also to deal with the potential for user fees and the many other current issues that will po­ tentially impact the costs, convenience, and safety associated with piloting our personal aircraft. Let's all stay the course! Be diligent, and be safe. We can ill afford any addi­ tional tragedies for the media to inflate into fantasies. By the time you read this month's column, the 170 will be newly annu­ aled again. This past summer was such a busy time; I really struggled with setting a time that fit my A&P's schedule and mine. I am particularly happy that the next annual will take me right through next year's entire summer flying season without having to worry about the sea­ son being abruptly interrupted by an annual inspection. Let's see, there has to be at least one more chili lunch fly­ in somewhere in the Midwest this year. M'ybe I'll ''''' you thh~

VINTAGE AIRPLANE

Clayton "Scotty" Scott (1905-2006)

Aviation lost one of its true icons on September 28 when Clayton L. "Scotty" Scott, EM 24643, passed away at the age of 101. The Mercer Island Washington, resident flew more tha~ 8,000 hours over the span of 80 years in airplanes too numerous to list. He learned to fly by persuading airmail pilots to give him dual instruction in 1926. He soloed in a Waco 9 three months before Lindbergh's trans­ Atlantic flight to Paris in May 1927 and soon became a Pacific Air pilot. Early Flying Days

By 1928, Scott had his own plane and was giving rides at Seattle Flying Services airfield. One day he was forced to make an emergency landing at an uncompleted airfield being built by the county a few miles away. That became the first landing and takeoff from what today is Boeing Field. In 1929, Scott made the first commercial flight across the Gulf of Alaska, from Juneau to Cordova, in a Keystone Loening Air Yacht. Later he flew a Loening Commuter amphibian from New York to Seattle in 19 hours, 35 minutes. While flying a Commuter from Seattle to Alaska in 1932, Scott met Bill Boeing during a fuel stop at Carter Bay, British Columbia. Coincidentally, Boeing was there fueling his yacht, Taconite, and Scott offered him a sightseeing flight. That chance meeting changed Scott's life; Boeing hired him to fly for his United Air Transport, the company subsidiary that would became United Air Lines. During 1933-34, Scott flew Boeing 247s between Portland and Salt Lake. Scott later became Boeing's personal pilot, covering all of Alaska on fishing and hunting trips in a Boeing B-1E 204 flying boat as well as a Douglas Dolphin amphibian and a Douglas DC-5. 2

NOVEMBER 2006

Boeing's Chief Test Pi lot

In 1941, Scott began a 25-year stretch as a production test pilot for Boeing, including 14 years as chief test pilot. He flew many types, including the DB-7, A-20, B-29, B-50, B-47, B­ 52, C-97, 707, 727, and, of course, the B-17. Scott held the distinction of having flown more Flying Fortresses­ more than 1,000 of them-than anyone else. He retired from Boeing in 1966 and went full time into his aircraft modification business, ]obmaster, which engineered float installations for planes not previously certificated for water operations. Some of the airplanes he modified included the Dornier, Pilatus Porter, Howard (at one time, he owned the type certificate for the Howard 15 series; he had recently transferred the type certificates for the Howard to the Howard Club), Lasa, Piper Aztec, Northwest Ranger, Bellanca, and Cessna 195. Scott kept an office at his ]obmaster hangar on Clayton Scott Field. On his last birthday Ouly 15, 2006), he was forever immortalized with a life-sized bronze sculpture dedicated by friends and colleagues at the Renton, Washington, airport renamed Clayton L. Scott Field on his 100th birthday a year earlier.

EAA AirVenture Oshkosh 2006 Video Available Relive all the excitement of EAA AirVenture Oshkosh, the World's Greatest Aviation Celebration, with the 2006 souvenir video. Some of the highlights in this year's video include: • Fly-bys of the B-1 bomber and the Blue Angels • Burt Rutan and the future of

aerospace travel

• Awesome aerial performances by F-22 Raptors .The 50th anniversary of the Cessna 172 Skyhawk

. The C-17 Globemaster

• Air show performers, including Iron Eagles Aerobatics, Patty Wagstaff, Mike Mancuso and Matt Chapman, The Aeroshell Aerobatic Team, Sean D. Tucker, Ten Sticks of Dynamite, and more • A grand World War II bomber

reunion

• Plus the best in homebuilt, Vintage, ultralight, and warbird aircraft. The video is available in either VHS or DVD for $19.95. Bonus material on the DVD includes a complete interview with Mike Mancuso and Matt Chapman, excerpts from Theater in the Woods programs, and more. Order your copy online at http:// Shop.EAA.org or by calling 800­ 564-6322.

VAA Gifts If you're looking for a VAA-related gift, or you want to drop a hint to that special someone, visit our online gift store at http://Shop.EAA.org/index_vintage.html. There you'll find just what you need to show your pride in your favorite aviation organization. Exclusive VAA logo merchandise is available, everything from fleece blankets to cockpit flashlights and all sorts of fun and useful items for home and cockpit alike. Order early

Young Eag1es Program Adds Wristbands The EAA Young Eagles office has added another promotional item that children can receive after their Young Eagles flight. In addition to the official certificate signed by Young Eagles Chairman Harrison Ford and by their pilot, they can now be presented with a silicone­ rubber Fly Free wristband. The wristbands were introduced at EAA AirVenture Oshkosh 2006 and have been popular with young people at recent Young Eagles events. Order wristbands, or any Young Eagles supplies, at

for the best selection ! You can place your order online or call EAA Membership Services at 800-843-3612 to order your VAA logo merchandise. If you're read ing this magazine and you're not yet a member of VAA, or you'd like to give a gift membership in the Vintage Aircraft Association, call Membership Services at the number listed above, and be sure to mention code Speed06 when you call. You can also join online at www.VintageAircraft.org/whojjoin.html.

....

WHAT OUR MEMBERS

ARE RESTORING

-=-­

~

~.

~,.~-~

_

-.-..::..

­

... ..... _......--_--,­ -----.... .. =~-:. .=.:= s...~:::.==.: ;?== REARWIN SKYRANGER

-~-- -~-".-,..

--~

1948 LUSCOMBE 88

https://Secure.EAA.org/youngeag/es/ supplies.htm/ or call the Young Eagles office at 877-806-8902. The Young Eagles office is also asking for your help this fall as we strive to reach the 1.3 million milestone before the end of the year. After a slow start, your assistance is needed to finish 2006 strong. This also may be one of your last opportunities of the flying season to reach 1/10 for 2006"-the goal of flying a minimum of 10 Young Eagles this year. Those reaching 10 for 2006 can earn credits to help send a young person to one of EAA's Air Academy summer camps next year. Thanks for all your past support.

WHAT OUR MEMBERS ARE RESTORING Are you nearing completion of a restoration? Or is it done and you're busy flying and showing it off? If so, we'd like to hear from you. Send us a 4-by-6­ inch print from a commercial source (no home printers, please-those prints just don't scan well) or a 4-by-6-inch, 300-dpi digital photo. A JPG from your 2.5-megapixel (or higher) digital camera is fine. You can burn photos to a CD, or if you're on a high-speed Internet connection, you can e-mail them along with a text-only or Word document describing your airplane. (If your e-mail program asks if you'd like to make the photos smaller, say no.) For more tips on creating photos we can publish, visit VAA's website at www.vintageaircraft.org. Check the News page for a hyperlink to Want To Send Us A Photograph? For more information, you can also e-mail us at vintageaircraft@eaa.org or call us at 920-426-4825. VINTAGE AIRPLANE

3

The Amazing

Brazi ian

Alberto Santos-Dumont and his 14bis BY

f you were a well-heeled vis­ itor to Paris at the end of the 19th century, your path may have crossed that of a small Brazilian man who was dressed impeccably, with the manners of a well-bred gentleman. He was already wealthy and a well­ known man about town who could have just as easily lived a life of privilege afforded by his father's lu­ crative coffee plantation. His days might have been occupied as a so­ cial gadfly who did little more than visit the many cafes and salons of 1900s Paris. But Alberto Santos-Du­ mont was more than just another free-speeding foreign expatriate liv­ ing in turn-of-the-century Paris; he was driven to learn and to explore the world around him. This was the time of Jules Verne and his amazing stories that cap­ tured the world's imagination with innovative fictional machines. Pre­ World War I Paris was the center of culture, where the world's elite men walked along the tranquil waters of the Seine River, arm in arm with their beautifully dressed and coiffed women. But while he was comfort-

H.G.

FRAUTSCHY

I

4

NOVEMBER 2006

Alberto Santos-Dumont 11873-1932)

Well-educated, curious, and mechanically inclined, Santos­ Dumont started his aeronautical career by flying gas-filled spherical balloons.

able in the rarefied atmosphere of high society, the amazing real world of engineering and mechanics is what intrigued "Le Petite Santos," the slim man from Sao Paulo, Brazil. At his father's urging, upon his arrival in Paris, the young Santos­ Dumont hired a professor to serve as his tutor in science and engineer­ ing. What few people realized at the time was the single-minded deter­ mination Santos-Dumont had with regard to one aspect of science that had yet to be fully conquered-the air. Dumont had dreamt of flight since he was a teen, and the efforts made by aeronauts flying free bal­ loons inspired him to learn as much as he could. Well-educated, curious, and me­ chanically inclined, Santos-Dumont started his aeronautical career by flying gas-filled spherical balloons, both for his first balloon builders, Lachambre and Machuron, and later in balloons he designed him­ self. Constantly improving upon the technology of the day, Santos­ Dumont was convinced that creat­ ing a steerable balloon was possible, and by 1900, he'd succeeded in cre-

The 14-bis as it is prepared for its record-setting flight on November 12, 1906. Santos-Dumond fourth flight that day covered more than 220 meters in 22 seconds, winning him the Aero Club du France's prize and setting the first officially recognized record in heavier-than-air aviation. Note the addition of ailerons to the outer wing bays. The ailerons would align themselves with the air stream once the aeroplane was underway. On the replica built to com­ memorate the 100th anniversary of the flight, the ailerons showed themselves to be prone to flutter. Given their nearly symmetrical configuration, that's not too r---------.---.,."..""...____ surprising. In one often-reproduced photo, the ailerons

are shown flat to the wind-the altered photo

(see inset) has been doctored to show the craft

in flight, but it would seem highly improbable

the 14bis could fly with the added drag of the

ailerons as shown. Later, higher-quality pho­

tos from the Santos-Dumont family collection

showed the ailerons properly aligned in flight

ating a practical airship that em­ bodied most of the concepts still used today in airship flight . His invention of the ballonet (an airbag within a gasbag), used to keep the nonrigid airship's size sta­ ble and structurally intact, was first used in his airships. Since Santos­ Dumont's incorporation of the de­ vice, it's become an integral part of all nonrigid airships built. He was the first to successfully use a gaso­ line-powered engine to propel his airships; prior to his efforts, electric and steam engines had been used, but the limited power available did not provide the propulsive power needed to make these predecessor airships practical. He became known worldwide in October 1901 after winning the 100,000 francs Deutsch prize for the first flight to be completed from the French Aero Club's Pare d'Aerostation at Saint-Cloud, across the Seine River to the Eiffel Tower, and then back gain, in under 30 minutes. French

crowds below cheered the Brazil­ ian as if he were born and raised in Paris, and the celebrations of his ac­ complishments would go on in the press and streets of France for days to come. In a gesture that would so­ lidify his exalted status among Pari­ sians, Santos-Dumont split the prize money between his crew and the poor of Paris. As we'll see, it wouldn't be the first time a major accomplish­ ment would be accomplished by Santos-Dumont in October. By 1904, while still improving and flying his airships, Santos-Dumont and his crew were secretly hard at work building a heavier-than-air airship, an aeroplane that had evolved dur­ ing his exploration of others' efforts at heavier-than-air flight. Inspired by a glider constructed by Gabriel

Voisin, financed by Ernest Archdea­ con, and towed down the Seine River by a speedboat, Santos-Dumont de­ cided upon a structure consisting of Hargrave cells. The box-kite cells had been shown to perform well as kites, providing lift and stability, according to research done by the Australian Lawrence Hargrave. Enthused by the prospect of win­ ning yet another prize (although he didn't seem to need the money, the competition seemed to whet his ap­ petite), Santos-Dumont studied the problem of fixed-wing flight and be­ lieved he had a solution to the prob­ lems. Dumont's pioneering work was done in a metropolitan setting, and his willingness to do much of his testing in public underscored VINTAGE AIRPLANE

5

~=~=:: tested the 14bis while it was suspended below his model 14 airship. Prior to his involvement in heavier·than·air flight, he was the foremost builder and flyer of nonrigid airships. his willingness to share whatever knowledge gained by his successes and failures. This work done in the glare of the public spotlight would serve to glorify his work by his adoring countrymen and those of France, since earlier work, most notab ly that of the Wright broth­ ers, was done in nonpublic settings and was often dismissed as exag­ gerations or simp ly impossib le. It wasn't until Wilbur Wright's flights in France during the summer of 1908 that the public at large in Eu­ rope accepted the Wrights' claims of heavier-than-air flight. The new model 14 airship was used to test the new aeroplane, which was then dubbed the 14-bis, which has been variously translated as "14 again," "14 mark II," or other similar lines of thought. Suspended below the small air­ ship, the engine was tested, as was the stability of the biplane. The tests proved to be rather difficult. When power was applied to the 24-hp Antoinette engine, it drove the nose of the airship uncontrollably upward, so that tests wou ld last only for a short while. The low airspeed of the entire balloon/aeroplane also made it difficu lt to accurately gauge the effectiveness of the controls. His second testing apparatus was an inclined steel cable set between 6

NOVEMBER 2006

two poles. The 14bis was suspended below the cable on a trolley that permitted the aircraft to travel, of­ ten towed back to its starting po­ sition by a donkey, while testing the aircraft's center of gravity, flight controls, and engine. The 14bis configuration was in­ teresting to behold. Built with the

The 100th anniversary of the first public heavier-than-air flight in Europe. combination rudder/elevator in the front and the engine in the rear, the canard (French for duck) arrange­ ment was chosen by Santos-Dumont in the belief that the forward con ­ trol surfaces woul d be more effec­ tive when mounted forward. The controls were activated using cables that ran to the wicker basket cock­ pit mounted within the framework of the fuse lage, just forward of the wings. Santos-Dumont stood in the basket, using both hands to ma­ nipulate the controls. Each of the Hargrave cells was constructed with

curved surfaces that formed the up­ per and lower wings, and the area we would now consider the interplane struts was covered in each bay, effec­ tively creating a set of vertical cur­ tains, which, when coupled with a significant amount of dihedral, gave the 14bis automatic lateral stability. When first flown in 1901, there were no provisions for lateral con­ trol. Santos-Dumont relied upon the action of the rudder, combined with the inherent stability of the box-kite cells arranged as previously described. Any turns would have been shallow, skidding affairs with little ability to counteract signifi­ cant wind gusts, but that didn't re­ ally matter, as the 14bis was to serve as Santos-Dumont's test vehicle for his aeronautical theories. As the tests concluded, Santos-Du­ mont realized that the 24-hp Antoi­ nette engine was not adequate, so he replaced it with a SO-hp V-8 Antoi­ nette engine. Confident he now had enough power to fly, he made his first attempt with the 14bis in early Sep­ tember 1906. The narrow-wheeled landing gear made ground runs chal­ lenging, and the aeroplane was dam­ aged on the first flight attempts. By September 7, he'd managed a short hop off the ground, and Sanots­ Dumont and his crew made ready for an attempt to win the newly formed

Aero Club du France's prize of 1,500 francs for a flight of 100 meters, as well as Archdeacon's prize of 3,000 francs for a flight of at least 25 me­ ters. The odd disparity between the two prize amounts may be explained by Archdeacon's realization that a truly successful flight was likely to be significantly less than 100 meters (about 328 feet) and that when this shorter flight occurred, it would be a significant event. On September 13, after an aborted attempt due to an inadequate spark to the engine, Santos-Dumont managed a flight of about 13 meters (42.6 feet) at 1 meter in altitude. The landing was rather hard and resulted in dam­ age to the 14bis. Even though he'd not won the prize, Santos-Dumont's flight was hailed as a milestone in

in front of the Aero Club commit­ tee and a growing public crowd. At 8:45 in the morning the engine was started, and again, to the frustra­ tion of the crowd and the crew, the engine refused to run properly, re­ quiring repairs by Santos-Dumont's trusted mechanic, Albert Chapin. The trial was delayed until later in the afternoon, after a few ground runs were performed to test the engine. Slight damage was done to the landing gear during the runs, so repairs were made, reinstalling a loose wheel and inspecting the airframe once again. Finally, at 4 p.m., Santos-Dumont gave the order to have the engine started, and once satisfied that it was operating properly, he waved away his helpers and began to roll along in the 14bis. It slowly gained

3,000 francs (about 600 U.S. dol­ lars in 1906) by flying more than 25 meters in a slightly curving-to-the­ left path. Hailed immediately by the amazed crowd, he once again became the toast of Paris. At a November 10 dinner in which the feat of the Brazilian was honored, Archdeacon closed his re­ marks with this comment: "Santos­ Dumont flew 60 meters on October 23, but it was these 60 meters that were the most difficult." Santos-Dumont didn't stop fly­ ing the 14bis after the momentous flight of October 23. He contin­ ued to refine the aircraft, with the most significant change being the addition of lateral control. A pair of small surfaces were attached and hinged in the middle of the outer­

!)alltol.·Dlum,ont stands wicker basket cockpit as he flies the 14·bis on its historic flight on October 23, 1906. His flight traversed 60 meters, winning him Ernest Archdeacon's prize of 3,000 francs.

aviation history, and the spectators, including members of the Aero Club, were confident the 14bis would be repaired and capable of much lon­ ger flights. They didn't have to wait too long. Once again, Dumont chose the public Champs de Bagatelle for his test flights, and by October 23 the 14bis was again ready for a flight

speed until air could be seen under the narrowly spaced front wheels. As the nose gently pitched upward, the 14bis flew parall el to the grass field, reaching an altitude no higher than 3 meters (10 feet). As the en­ gine's output slowly declined, he gently coaxed the 14bis to a landing after covering 60 meters (197 feet). He'd won the Archdeacon prize of

most bays of the wing cells, with the cable-actuated controls con­ trolled by a harness worn by Santos­ Dumont across his shoulders. By leaning as he stood up in the wicker cockpit, Santos-Dumont could con­ trol the lateral movement of the 14bis. To this day we continue to use a number of words that are de­ rived from French terms, and the VINTAGE A I R P LANE

7

give proper credit to the aviation pioneers who worked diligently to conquer the air. In some circles, and in particu­ lar on a few websites, it seems a few folks are doing their best to distort the facts regarding Santos-Dumont's ~ accomplishments as compared to the ~ Wright brothers' work. That's unfor­ . ~ tunate, as both hold esteemed POSIo ~ tions in history, and rightfully so. g! In particular, there are statements ~ made regarding both the claimed ~ timing of the Wrights' flights as well as the red herring of arguing ~ that they used a catapult to launch U their aircraft (first done on Septem­ ber 7, 1904, at Huffman Prairie, Ohio, and never used at Kitty Hawk in 1903, as is sometimes mistakenly written, again, particularly on In­ ternet websites). Let's clear up the launch rail controversy right off the bat. As I wrote in the sidebar piece I included in 2005's August issue of Vintage Airplane (and available on our website at www. VintageAircraft. org/{eatured/index.html), the Wrights were fastidious calculators of ev­ ery component's weight, and given the loose, sandy soil conditions they chose as their testing grounds (which also gave them consistent winds and a softer ground to im­ pact during test flights!), skids sim­ ply made more sense. From 1903 until 1908, for takeoff a simple wooden rail was used to keep the skids clear of the ground during the takeoff run . At no time during their flights was any significant ex­ ternal force applied to the airframe to assist its takeoff. In his diary, Wil­ bur does mention running along­ side the 1903 Flyerto help keep the wingtip from brushing the ground. It's unlikely that he would have ap­ plied much force to the thin wing strut, as any force applied would have also been pushing the right wing forward in a skidding turn. Later, when the length of the takeoff space available and, in many cases, the condition of the

)­

~

(/)

g

Afascinating photograph that shows the starting method used by the crew of the 14bis. The SO-hp Antoinette engine was hand·cranked, but from a distance!

little wings out near the wingtips on all our aircraft continue to be re­ ferred to as ailerons. On November 12, Santos-Dumont again flew the 14bis, with each flight building on the success of the previ­ ous one. On the fourth flight, made at 4:45 p.m., he managed a spectacu­ lar flight, traversing 220 meters (722 feet, or nearly a little more than 1/8 of a mile) in 22 seconds. In fact, the flight might have lasted longer, but he overran the area in which the spectators expected him to fly, so that he had to turn the 14bis and land to avoid injuring spectators who were standing in his flight path. He had flown in spectacular fashion in front of an adoring French crowd, and soon newspapers worldwide were filled with the news that a Brazilian had flown a heavier-than-air aero­ plane in the first public demonstra­ tion of such a craft. Today he is hailed in his native Bra­ zil as a hero, the man who invented the modern airplane. Certainly his achievements are to be lauded, and his pioneering work in airships and later in aerop lanes should be hon­ ored in perpetuity. Trois acclamations pour Le Petite Santos!

Who Was First-At What? Writing th is article has been a 8

NOVEMBER 2006

great pleasure, as one of the first non­ fiction books I recall checking out of the library in the early 1970s back in Arlington Heights, Illinois, was a biography of this remarkable man. After his success with the 14bis, San­ tos-Dumont built the forefather of the modern ultralight airplane, the Model 20 Demoiselle. I must have built at least a half-dozen models of that aircraft over the years, and I still find it to be irresistible. It is unfortunate that too often t he work done internationally by many experimenters and inventors is mired in the politiCS of nation­ alism, and a Santos-Dumont ver­ sus the Wrights argument seems to have been given a new life on the Internet, with conspiracy theorists wishing to rewrite aviation history to suit their own views. Discount­ ing the work done by men in differ­ ent countries does little to serve the cause of preserving accurate history and in some cases seems to deni­ grate the work done by the other party. The fact is that a number of experimenters were working on the same problems in different places on the planet, from New Zealand to the continent of Europe and many places in between. Not all would be successful, and only photographic and eyewitness proof allows us to

Current books Wings of Madness: Alberto Santos-Dumont and the Inven­ tion of Flight, by Paul Hoffman, ISBN 0786866594, published by Hyperion in 2003.

In this romantically painted postcard image, Santos-Dumont and his 14bis soar over the ver­ dant green French countryside.

ground dictated the use of a longer rail, and still later the addition of a drop­ ping-weight catapult, the Flyers were still capable of taking off under their own power; it just didn't make sense to do so, as every rail not used made regu­ lar operations easier to accomplish. For the later flights in Ohio, Washington, D.C., and Rheims, France, the rail and the catapult didn't make the flight pos­ sible; it simply shortened the amount of time and distance needed to attain take off speed. Not using wheels re­ duced both the weight and complexity of the airframe; the skids were an el­ egant solution to the ground-handling problem presented to the Wrights. I'm not certain that a part of the mis­ understanding isn't due to language differences, but it's clear that part of it has political overtones. Attempting to discount the Wrights' flights on the Outer Banks of North Carolina as not being witnessed or being made "in se­ cret" is a silly argument, as it has been documented since aviation's early days that there were multiple witnesses of the 1900-1903 activities of the Wrights at their camp near Kitty Hawk, North Carolina, and clear, photographic evi­ dence exists as well. It's equally unfortunate to deni­ grate the contributions Santos-Dumont made to the aeronautical sciences. His

work was done in a similar fashion as other pioneers, drawing on the expe­ riences and results of others' experi­ ments while adding his own ingenuity and mechanical acumen to his many successful projects. He certainly was no "one-hit wonder." As there is no fact-based doubt on the validity of the Wrights' claim to have flown the first heavier-than-air powered craft from level ground under complete three­ axis control, there is equally no doubt that in front of a large and enthusiastic crowd, Santos-Dumont accomplished the first fixed-wing, heavier-than-air flight in Europe. That's quite an ac­ complishment, one I am happy to cheer about and join with enthusiastic French and Brazilians as we celebrate the exceptional work done by this turn­ of-the-century aeronautical renaissance man. I salute those Brazilians such as Alan Calassa, who painstakingly built with collaboration with Embraer and MUSAL (the Brazilian Aerospace Mu­ seum of Rio de Janeiro), a pair of repli­ cas of the 14bis. One of the replicas was flown with a modern two-cycle engine, while the others have been displayed with an authentic SO-hp Antoinette en­ gine. The replicas are faithful in struc­ ture and dimensions to the original and include unusual building materials such as bamboo and French silk . .......

Google Book Search at http://Books. Google.com has a scanned copy of My Air-ships, by Alberto Santos­ Dumont. It's 7.1 megs and is rather unevenly scanned but completely readable. Written by Santos-Dumont in August 1904 and then translated into English, it's a fascinating reading. A reprint of the book is also available through vari­ ous booksellers. Unfortunately, the most spectacular book I've had ac­ cess to concerning the accom­ plishments of Santos-Dumont does not appear to be avail­ able here in the United States. Alberto Santos-Dumont: I Sailed the Wind was published in Brazil in both Portuguese and English editions, but I've not yet been able to locate a bookseller (including an ex­ tensive search using Google and Bookfinder.com) who car­ ries the English edition. On the back of the book the ISBN number listed is 852091555­ 8. We'd appreciate hearing from anyone able to find the English edition of this coffee­ table-sized book.

VINTAGE AIRPLANE

9

BY SPARKY BARNES SARGENT It's not too often that you'll see an airworthy Curtiss OX-5 powered biplane on the flightline at EAA AirVenture Oshkosh. And it's rather unusual to encounter a young pi­ lot who is eager to fly such an antique, but it's especially rare when he happens to be a direct descendant of the family who was inextricably involved with the develop­ ment and manufacture of that very airplane. Charles "Charlie" Laird IV of Indianapolis, Indiana, is grateful for his good fortune to own and fly thi s 1927 Swallow, which was built by Swallow Airplane Manufac­ turing Company in Wichita, Kansas. Advertised as "Amer­ ica's finest commercial airplane" and touted as having "no competition in quality and performance at low cost," the three-place biplane originally sold for $2,485 at the fac­ tory. Charlie and his father, Charles "Chuck" Laird III, of 10

NOVEMBER 2006

Adelanto, California, purchased the biplane about a year ago, having spotted it for sale in AircraftOwner magazine.

79 Years Young Although NC979 is an "old-timer," its recent restoration has it looking fresh and new, with its light yellow wings shin­ ing against a jet-black fuselage. Charlie'S brother, Will, spent many hours researching this Swallow's history and writing it into booklet form for his family. According to his research, the Swallow was owned early on by various air service com­ panies and later by several individuals. In July 1936, owner Selden Richter was "flying to Fort Peck, Montana, with his girlfriend (who later became his wife) and [the Swallow] de­ veloped engine trouble. He couldn't land upwind into the Missouri River because his girlfriend couldn't swim, so he

Eventually the plane was 'inherited' by Bill Court [the farmer's nephew]. The Swallow had languished long enough, and when Don Brown purchased it in 1994, he invested six years' re足 search, time, and labor in its restoration. Painstakingly, he brought its steel tube fuselage and wood spars and ribs back to life. Then Ray Sanders of Kalispell, Montana, acquired it in 2000. He completed the airframe restoration, installed a tail wheel in place of the original tailskid with its bungee shock absorber, and obtained a 90-hp OX-S engine for it. Four years later, the Swallow finally returned to the sky.

Curtiss OX-S Charlie Laird

landed downwind into the brush along the river. The plane (though it looked intact) was ruined," Will reports. Afterward, the biplane was stored for more than half a century, its remains tucked away in a Montana farmer's barn. At one point, part of the Swallow's ignoble fate was that its lower wings were used to enclose some baby pigs.

Speaking of the OX-S, there are some fine points about caring fOf, and flying behind, this antique powerplant. The engine preflight takes about 20 minutes, since this particular engine was updated with "Millerized" grease fittings. "That means that you don't have to oil every足 thing-you just grease it about every five hours. And you'll change oil-it holds 3.5 gallons-about every 20 hours, which is also when you grease the water pump," comments Charlie, adding "it's water-cooled, and the header tank holds about 4.5 gallons-so you always have VINTAGE AIRPLANE

11

Close-up view of the engine controls, with the stabilizer trim control mounted on the tubing near the floorboard.

Close-up view of the right side of the instrument panel.

Charlie Laird put a few finishing touches on the biplane, such as wrap足 ping the control stick with rib-stitching cord and shellacking it.

Above: This Swallow is a "3POLB," which means three-person open-land biplane. PHOTOS SPARKY BARNES SARGENT

to make sure your water temperature runs about 140 to ISO degrees. One key thing about the OX-s is when you land, you'll want to open the cowling to see if you've had any water leaks-that's the heart of the engine. If you see a little bit of brown streaking on the engine, you'll know you have a water leak." Charlie says that flying is smooth behind the OX-s, but he adds with a laugh, "When you bring the power back, it vibrates, so that's kind of nerve-racking the first time you do that-the whole airplane starts to shake and you're like, oh no! What's going on? But the engine smoothes right out again."

Flying the Swallow Close-up view of the left-and-center portion of the instru足 ment panel-the data plate recommends "Gargoyle Mobi足 loil" for the engine. 12

NOVEMBER 2006

The old engine burns about 8.5 gph from the 40-gallon tank located in front of the forward cockpit, which gives the Swallow about a five-hour range. So far, the longest leg

that Charlie has flown is 3.5 hours, which was on the way to Oshkosh. On that flight, the Swallow's cruising speed, per GPS, was ranging from 72 to 80 mph-while its wing­ mounted Johnson airspeed indicator showed about 85 mph. Charlie is pleased with the way the biplane handles and has fun flying it. "After you get going down the runway, you have to push the stick forward to bring the tail up, and after that it accelerates fairly decently. About the time the tail comes up, it starts lifting off the ground-and that's probably around 25 mph, or less. When you're taking off, you apply power gently but smoothly all the way up, and just ease in a little rudder. It takes off in about 400 feet, so it gets off the ground very fast-it just doesn't move far from the ground for a while," he says, chuckling. "After that you can ex­ pect a climb rate of 100 to 200 fpm; it's very slow, so I try and accelerate a little bit in ground effect, and after that it climbs up to 1,500 feet or so fairly rapidly. Then it plateaus, and that's about all you're going to get! On a long flight, you can kind of nurse it up to 2,500 feet or 3,000 feet." The biplane'S lever-operated trim control is mounted on the left side of the pilot's seat, which moves the stabi­ lizer up and down, and Charlie has found that it cruises best with full-aft trim (probably due to the removal of the heavy tailskid). He says, "The airplane picks up speed re­ ally fast as soon as you drop the nose a little bit, and it's an airplane that you have to fly the whole time. If you make any radical movements, you'll start losing lift and sinking fast. It has a very short aileron throw, and when you're on the ground, you understand that if you had any more than that, you'd end up grabbing wingtips real fast. But it's very coordinated with stick and rudder input, and it's easy to land-it's a floater, and just made for grass."

Charles Laird Sr. The Swallow neatly dovetails with Charlie's personal family history, since the brothers Emil Matthew "Matty"

Laird and Charles Lawrence Laird Sr., who were instrumen­ tal in designing and manufacturing numerous Swallow aircraft, were his great-great uncle and great-grandfather, respectively. As young boys, the brothers spent hours building model airplanes, and in 1912, they progressed to their own full-scale monoplane. "My great-great-grandmother, Clara, allowed them to build the plane in the upstairs gable," smiles Charlie as he recounts the story, "and they couldn't get it out-so she paid to have the gable cut out and the whole airplane lowered to the ground. So that's where they started. My great-grandfather, Charles, was 13, and great-great uncle Matty was 16 at the time-he was a bank clerk working at the First National Bank in Chicago. So Buck Weaver and Charles worked during the day building it, while Matty was earning money to pay for it. It was enough of a success that they were able to build the Baby Biplane in 1913." From that point forward, both brothers followed avia­ tion careers, albeit on divergent pathways. While much has been written about Matty, who is well-known, in part, for his involvement in air raCing, particularly as the builder of the Laird Solution and Super Solution race planes, there is less information readily available about his brother. "I'd like to share our family history as I know it, as it's been passed down to me," says Charlie, elaborat­ ing that the following information was gleaned by the Laird family 's own research and an informal resume that Charles Laird Jr. dictated to his son, Chuck Laird in 1976. According to that source, Charles Laird Sr.'s aviation ca­ reer began when he was just 14 years old, while he was fabricating airframe components for Katherine and Mar­ jorie Stinson and his brother, Matty, in Chicago. By October of 1915, he was installing aircraft fuel sys­ tems and instrument panels for Standard Aircraft Com­ pany in Plainfield, New Jersey, where he worked until April 1916. He commenced aircraft assembly and rig­ ging for Aeromarine Plane and Motor Company in NutVINTAGE AIRPLANE

13

ley, New Jersey that same month. January 1917 saw him servicing the training fleet-including the Burgess and Wright Model B-for the Stinson School of Flying in San Antonio, Texas. By May Charles had moved on to the U.S. Aerial Coast Patrol Unit No.1 in Long Island, New York, where he repaired flying boats and seaplanes-a prelude to his work at the Naval Aircraft Factory in Philadelphia, Pennsylvania, the following year. By November 1918 he was working at his brother's company, E.M. Laird Airplane Company, in Wichita, Kan­ sas (which was financed by oilman Jacob M. "Jake" Moel­ lendick). Notably, Lloyd Stearman, Walter Beech, and Buck Weaver were integral in everyday operations. Charles supervised work in the factory and made final inspections of aircraft until January 1922. It was during this time that the Laird Swallow was designed and manufactured. Origi­ nally named the Wichita Tractor, it acquired a more be­ coming name when an observer on the ground, William Lassen, remarked that it "flew just like a Swallow." The Laird Swallow was the first production airplane in Wichita, and 43 of these biplanes were produced before Matty Laird returned to Chicago in 1923. Billed as "Amer­ ica's first commercial airplane," one of these Swallows was the first aircraft produced in the United States to bear a civil registration, NABCB. From October 1923 to August 1925, Charles was re­ building motors for the Wichita Oakland Motor Company. Then he was employed by the Swallow Airplane Manufac­ turing Company in Wichita from August 1925 through Oc­ tober 1927. During this time, the "new" Swallow of 1924, with its single-bay wings, was produced. In 1926, Charles (along with Waverly Stearman) designed the Super Swal­ low, which had a steel-tube fuselage and N-struts, and he supervised construction of the airplanes (including the 1927 Swallow) and mailplanes, which were used by Varney 14 NOVEMBER 2006

...z

A "Laird Airplanes" logo from ~

an early 19205 brochure. ~ ~

?1

~ "rfi

Air Lines. This brings us up to ~ fr­ the point when NC979, se- ~ '\. ~ rial number 842, was built (it ~ ~ was originally licensed by the ~ Department of Commerce as a. Agraphic iIIustrati-~ on of'-th-" -e C-976). Approved Type Cer- early 19205 Laird Swallow, tificate Number 21 was issued from the front cover of a for this model of Swallow in company brochure. December 1927. Charles' aviation career took on a slightly new direc­ tion in November 1927, when he formed Laird Aircraft Corporation in Wichita and designed and supervised construction of a five-place cabin biplane (the Whippoor­ will), but the Great Depression was approaching, and by January 1930 he had returned to Chicago, where he was engaged in building special order airplanes. From there, he moved to California and worked for Northrop Corpo­ ration, Consolidated Aircraft Company, and North Ameri­ can Aviation Corporation. Eventually, Charles became foreman for aircraft overhaul inspection at George Air Force Base in California until he passed away in 1967. Yet his passion for airplanes and aviation lives on in the Laird family; his airplane-mechanic son, Charles L. Laird Jr., taught his own son, Chuck, about airplane restoration. Chuck Laird (III) earned his pilot certificate early on, and today his son, Charlie (IV), continues the family passion for aviation. As a young boy, Charlie spent his summers working on airplane projects with his grandfather; today he is a commercial pilot and airplane mechanic. And he's pleased and proud that his wife, Amy, has decided to take up flying-she soloed just before AirVenture.

L air

swan

Ed Lachendro presented Char­ lie Laird with a rare pair of "Follow the Swallow" coveralls at AirVenture.

- -­ - 7k ---'---

BunRArE

Sharing the Swallow If yo u ask Charlie Laird what he likes best about hav­ ing this antique in the family, he'll tell you enthusiastically, "It's the only standard cate­ gory Swallow that's sti ll fly­ ing, and I'm just happy to be able to show it to everybody and answer their questions. That's the nice thing about a flying airplane-people can enjoy hearing its engine, getting in it, smelling it-you know; it drips oil and it flies! It's been so wonderful here at AirVenture-everyone stops by and wants to talk about it, and they ask, 'Is that a real OX-S?' It enables us to share the family history, a different side besides just great-great uncle Matty; he had a brother named Charles that many folks haven't heard about-it's kind of like Lloyd and Wa­ verly Stearman-we don't hear about Waverly too much." NC979 and its new family have been warmly envel­ oped by an avid cadre of "antiquers," who have shared their knowledge, memorabilia, tools, hangar-and even airplanes-with the Lairds. Chuck Laird trucked the bi­

SYSTEM

~. .,;:;;;-;"::

plane from Montana across the Rocky Mountains to Des MOines, Iowa, where his son joined him for the final phase of the journey to Columbu s, Indiana. Upon their arrival, Mike Williams generously provided his hangar for the reassembly of the Swallow. There's nothing like being well-prepared before you fly a "family heirloom," and Bob Howie of Decatur, Illinois, invited Charlie Laird to

~ ----"-

VINTAGE LANES Classic Finish for Classic Airplanes Since 1949 MaRY Origirol Manufacture~s colors are available. Give your Vintage Aircraft an award-winning, original finish with unlimited color choices. Covering materials price for standard vintage aircraft: approximately $3500 Purchase the entire kit and receive a 10% discount.

SUperfIite· • 3701 Highway 162 Granite City. IL 62040 Ph. 8OO·323-C11511 Ph, 618·931 ·5080 Fx. 61&·931·061

I~~~~~~~~~~~~~==~==~~~=~~ J 0 I N To DAY!

___

800-322-2412 AND RE CEIVE 12 ISSUES OF VINTAGE AIR CR AFT ALONG WITH OTHER GREAT BENEFITS

fly his Waco 10 so he could get t he feeI of an older flying I ~~~~~~:;;;:;;;:;;;:;;;:;;;:;;;:;;;:;;;:;;;:;;;:;;;:;;;:;;;:;;;:;;;~I machine. Then Rich Davidson of Hanover, Indiana, an ex- r. perienced aviator of antique aircraft, agreed to check him out in the Swallow. Other individuals have come forth with distinctive Swal­ low memorabilia to share. Charlie notes, "Ed Lachendro of Beaver Dam, Wisconsin, gave me a pair of 'Follow the Swal­ low' coveralls; Richard Johnson of Topeka, Kansas, gave me an original sales brochure and three letters of recommen­ dation for Swallow; and David Mars of the American Barn­ stormers Tour gave me a Swallow screwdriver." In short, "everybody in the antique comm unity has just been outstanding," reflects Charl ie, elaborating, "we had issues with our prop, and suddenly there were guys loaning us props-even off museum airplanes-just to see if we could get a good one. We' re very grateful for all the help we've had." And the AirVenture judges for antique aircraft took note of the collective efforts that handsomely restored this Swallow, placing their seal of approval on it by award­ ing it the 2006 Antique Bronze Lindy for the Golden Age (1918-1927). ....... VINTAGE AIRPLANE

15

__

FM .P"", Moool7eooo

Disc Brake C

onVersion Kit for PIper A.lrcran

• I

onverslon Keep those 8.00-4s rolling ... and stopping! ARTICLE AND PHOTOS BY SPARKY BARNES SARGENT

fter settling down gently to terra firma, my 1948 Piper Vagabond's plump tires rolled rapidly over the grass fie ld, absorbing the bu mps and cushioning ou r ride. I taxied off the airstrip to let another air­ plane land and then attempted to sidl e back onto the st rip by easing the throttle forward as my left foot pressed the toe brake-and pressed again, harder this time-with an unexpected resu lt. The pedal was

A 16

NO V EM BER 2 0 06

"It's awell­ designed kit, and well worth it." -Harry Ballance J-3 Cub Owner

completely slack, and I knew right away what had happened . The Vagabond sti ll had its origi­ na l BF Goodrich/Hayes expander­ tube brake system, and the aged expander tube had ruptured. Hy­ draulic fluid was spewing out inside Above: Grove Aircraft includes all of these components-from hardware and parts to instruction manual-with each FAA-PMA model 76000 disc brake conversion kit for Piper aircraft.

Time to remove the wheel from the tire. Here, the lock pin is removed.

A close-up view of the old expander­ tube brake system, which had been leaking hydraulic fluid and soaking the brake blocks.

the brake drum every time I pressed the toe brake pedal. This abrupt fail­ ure was somewhat surprising, since I knew that the right expander tube had had a slow leak, evidenced by an occasional soft-feeling brake pedal and traces of hydraulic fluid­ al! sticky and grimy from dusty grass fields-which kept appearing

Then the lock ring is removed.

type certificate (STC) to retrofit aircraft parts that are at least half a century old. But Robbie Grove, president of Grove Aircraft Land­ Now that the tire, wheel, and attached ing Gear Systems Inc., has done brake drum have been removed, it's time just that. He developed a practical to remove the old brake units. disc brake conversion kit, which is a neatly blended compromise be­ around the brake drum and wheel tween the old and the new, allowing rim. But the left one had never vis­ Piper aircraft owners to keep the old­ ibly leaked. Now the time had come fashioned 8.00-4 balloon tires, tubes, for a brake job. Fortunately, my hus­ and wheels-and gain the functional band and I had recently-and, as it convenience of modern disc brakes turned out now, serendipitously­ that use standard and readily avail­ heard about a viable alternative to able brake pads. Grove applied for the STC for his disc brake conversion kit the old brake system. for Piper aircraft in June 2003, and it was finally issued by the FAA in De­ Disc Brake Conversion There aren't too many companies cember 2004. To date, the company has sold that have invested the time and re­ sources to develop a supplemental nearly 300 of these kits (currently

With the lock ring removed, the outer rim of the wheel comes off easily. VINTAGE AIRPLANE

17

It's important to protect the valve stem as the tire and tube are removed from the wheel.

Now's a good time to check and repack the wheel bearings, but

first the retaining lock ring must be removed.

Here you can see the six steel rivets that hold the brake drum to the inner wheel rim.

The wheel bearings, out of the race.

priced at $ 789) to Piper owners. The basic Piper models that are eli­ gible for Grove's conversion kit are the Cub, Cub Special, Cub Coupe, Cruiser, Super Cruiser, Family Cruiser, Vagabond, Clipper, Super Cub, and Pacer (specific model details are avail­ able on the STC approved model list, available at www.GroveAircraft.com). 18

NOVEMBE R 2006

Grove, elaborating on the conversion, says, "The idea is to keep the airplane looking as stock as possible, so we designed the system to have the brake calipers mounted on the aft side of the wheels per our STC; the calipers would show up like a sore thumb if they were mounted on the front. In reality, though, they would work equally well in either place; there isn't any flat tire inter­

ference or other clearance issues. We just had a customer call to tell us that he installed the conversion kit on an airplane that had wheelpants, and he didn't have any clearance problems. The installation isn't difficult and should take only a few hours." Of course, it 's important to bear in mind that Vintage airplanes often possess individual peculiarities (aris­ ing from years in the field and per­ haps some "nonstandard" repairs

Now the drum can be removed from the wheel. Note the presence of hydraulic fluid, which leaked from the expander tube and attracted dust and grime.

The rivet bucktails are very carefully drilled for easier removal, but not all the way through the wheel rim.

along the way), so clearances and fit should be carefully evaluated prior to installation. Grove also acknowledges those pi­ lots who admonish that "tail wheel air­ planes don't need real good brakes." He was well aware of that concern, as well as the potential problem of spin­ ning a tire on the rim and shearing a valve stem. Grove emphasizes that he "purposefully designed the brakes to have adequate stopping power, with­ out being overly sensitive, for the older Pipers." One of Grove's customers, Harry Ballance of Georgia, has owned his J-3 Cub since 1967 and was eager to share his own perspective on the conversion. "My Cub had the ex­ pander-tube brakes for years, and they were a pain. So I installed the new Grove disc brakes, and they're just wonderful! You can even hold it on a run-up now/' Ballance says, adding, "It's a well-designed kit, and well worth it. The only part I didn't like was drilling out the steel rivets . A friend and I did the whole conversion, and it took us , from start to finish, no more time than from breakfast to lunch."

After drilling, a punch facilitates complete removal of the steel rivets, leaving undamaged holes.

Purist Versus Practical While some Piper owners may be purists at heart, and wouldn't dream of modifying their aircraft in any way, there are practical reasons to consider making the disc brake conversion. My husband, who is an airframe and powerplant (A&P) me­ chanic with an inspection authori­ zation (IA) , and I were interested in making the change, because even if the expander tubes were still hold­ ing fluid properly, there was the burgeoning problem of finding new replacement parts for the tubes, drums, and the "daisy chain " of de­ teriorating and fragile brake blocks and metal retaining springs that en­ circle the expander tube . Plus, we weren't aware of any new produc­ tion expander tubes available on the market-just used ones, in vary­ ing condition. And there was another significant consideration-my particular Vag­ abond has rigid gear (no bungees), and if it weren't for those soft, pudgy tires wi th their low pressure, there wouldn't be any kind of shock ab­ sorption-so being able to retain the 8.00-4 wheels and tires was especially important. We felt it was time to say farewell to the old brake system, so I

picked up the phone and placed my order with Grove. The conversion kit was delivered in a few days' time and included all the necessary parts, including the brake diSCS, torque plates, caliper as­ semblies, copper tubing, and all of the bolts, washers, nuts, rivets, and brake fittings. The first page of STC No . SA01704LA and the approved model list were inside the installa­ tion, inspection, and repair manual, along with relevant drawings. Even a 12-inch-long drill bit (for drilling holes in the brake discs) was thought­ fully provided.

Off With the Old After perusing the installation manual, we were ready to begin. Since Grove's instructions are quite detailed, this article simply provides our readers with a narrative, hands­ on account of how we accomplished the tasks of removing the old brake system and installing the new con­ version kit-and, of course, how we like the way they performed. Our first step was simply ensuring that the FAA-PMA model 76000 disc brake conversion kit came with all of the parts it was supposed to have, and then it was time to get busy. We securely raised and supported the Vagabond's axles just high enough to allow ground clearance so we could VINTAGE AIRPLANE

19

Here you can see the old expander-tube brake and drum. Note the well-worn block that has fallen away from its metal retaining springs with just the touch of a finger. On the right side of the photo is a spare expander tube, so you can see what one looks like. The wheels have been cleaned and epoxy-primed, and now the new brake discs can be riveted to the original 8.00-4 wheels.

remove the wheels and tires from the airplane. With that accomplished, the old "daisy chain" of brake blocks and retaining springs was exposed, and it was evident that the blocks were not only soaked with hydrau­ lic fluid (decreasing their braking power) from the leaky expander tube, but they were chipped and cracked as well. Our decision to modify the brake system was reconfirmed. Next, we placed a drip pan under­ neath the old brake line fittings and disconnected the brake lines from the expander tubes. While the remaining hydraulic fluid dribbled into the pan, we unbolted and removed the brake assembly from the airplane. The gear legs and axles were in good condition, so we carried the wheels to our work­ 20

NOVEMBER 2006

bench and began the task of removing the tires and tubes from the wheels. First, we removed the valve core from the stem and deflated the tire. After removing the lock pins and lock rings from the wheels, the outer rims came off easily. As we pushed the tires and tubes down around the wheels, we took care to protect the valve stems. And we decided that this was an opportune time to remove, in­ spect, and repack the wheel bearings, so we removed the retaining lock rings from each side of each wheel and lifted the washers, felt pads, and bearings out of their races. The next task-removing the steel rivets that fastened the brake drums to the wheels-was soon underway. Since we didn't have a grinding tool that

We found that the new discs are easily press-fitted inside the wheels, with little pressure and gentle tapping on a wood board placed over the disc.

Now it's time to very carefully drill holes through the new discs, via the wheel's existing holes. Note the extra­ long drill bit (supplied in the kit).

This flush rivet set that matches the rivet head diameter is mounted in a steel block, which is very securely clamped in a heavy vise.

A layer of masking tape helps prevent the paint from being scarred as the wheel is held securely in place, with the rivet head neatly aligned on top of the bucking bar/rivet set.

A back-riveting tool is being used to drive the rivet and avoid chafing the disc in these tight quarters.

On With the New

We used a 4X rivet gun with about 90 pounds of pressure to drive the steel rivets that hold the disk to the wheel.

Here's the new disc, neatly riveted to the old wheel.

Right: Now it's time to install the torque plate on the axle (we primed and painted it to match the airplane's color).

would fit inside the brake drum's close quarters and grind the rivet bucktails without damaging the drum, we decided to be very careful and partially drill the bucktails (six on each drum) and then use a ball peen hammer and punch to finish remov­ ing the rivets. This worked nicely for us, and most im­ portantly, we didn't cause any deformation to the holes in the wheels. We removed the drums-dirty and grimy from leaking hydraulic fluid-from the wheels, which we cleaned with solvent. They were in good condition, and we wanted to help keep them that way, so we took the extra time to have a friend epoxy-prime them. And , since we thought it would be neat to have the anod­ ized torque plates match the color of the airplane, we took the time to paint them as well.

When the pain ted parts were cured and dry, it was time to start the installation process . We went over to our friend 's workshop, since he had a wider assortment of riv­ eting tools than we had in our shop. The first item of business was to press-fit the brand new discs into the wheels, and it was very easy to do so; they fit neatly in place with just a little pressure and gentle tap­ ping with a plastic mal­ let on wooden blocks, which were placed across the top of the discs. The next couple of steps seemed like the most challenging to us, V I NTAGE AI RP LAN E

21

A tubing bender tool is necessary to obtain the proper bend in the new copper brake line.

After bending the new copper brake line to the correct shape, it's time to use a tubing cutter to trim it.

Now that the brake line has been shaped and trimmed to fit, it needs to have a 45-degree flare to mate with the existing brake line in the gear leg and the threaded fittings on the brake caliper.

workbench and placed a flush rivet set, which matched the diameter of the rivet head, in the block . Then, one by one, my husband placed a steel rivet into a hole, giving it just a gentle tap to seat it. The riveting ses­ sion proceeded with a deep, steady­ ing breath in-between driving each rivet . My husband held the wheel disc-side up and positioned the rivet head precisely on top of the flush rivet set. While he continuously held it steady, our friend used a 4X rivet gun with 90 pounds of pressure and a back-riveting tool to drive the rivet, all the while exercising caution to avoid chafing the disc. This handy tool flares the end of the copper brake line. With the riveting job successfully since one sma ll slip of the drill bit for driving the flat-head, solid-shank completed, we headed home to finish or rivet gun could damage the old steel rivets, since the instructions ref­ the brake conversion. We installed the whee ls or new brake discs . With erenced only the FAA's AC 43.13-1B repacked wheel bearings and retain­ the wheels placed disc-side down, for guidance. After searching this ad­ ing lock rings in the wheels and then we used the supplied 3/16-inch, visory circular, we found that Chapter mounted the tubes and tires, taking 12-inch-long drill bit and drilled 4, Section 4 and Chapter 7, Section care to properly guide the valve stems holes through the new discs by us­ 1 discussed only generic informa­ back into place. Then we installed the ing the rivet holes in the wheels as tion about types of rivets and their outer rims of the wheel and secured guides. Then, leaving the discs in corresponding uses. Since we didn 't them in place with the lock pins and the wheels, we de-burred the ex­ find any pertinent information about rings. Next, we inserted the valve posed side of the holes, and for fur­ driving steel rivets, we used normal cores in the stems and inflated the ther good measure, we smoothly riveting techniques. tires to the appropriate pressure. In his tool chest, our friend lo­ We bolted the torque plates to the reamed out each hole, since a drill bit doesn't cut a preCisely round cated a hefty steel block specially de­ existing flanges and then slipped the hole. After that, we inserted Cleco signed to hold rivet sets. He modified wheels on over the freshly greased fasteners to ensure that the wheels its busine~s end by grinding ~ slight ' axles. After installing the brake cali­ "shoulder" on it so it wouldn't con­ pers, it was time for a few more little and discs stayed perfectly aligned. Then it was time for riveting, and tact the wheel during the riveting chores. The drawing in the instruc­ we spent some amount of time trying process. Then he clamped the block tion manual depicted the bleeder to determine the correct procedure very securely in a heavy vise on his valves on top of the calipers, and the 22

NOVEMBER 2006

Here's the completed disc brake installation, which has been tested to satisfaction. brake lines were routed from the bot­ tom of the calipers up to the exist­ ing brake-line fitting at the gear legs. However, the instructions indicated that the bleeder valves and brake­ line locations were interchangeable. So we decided to install the bleeder valves on the bottom of the calipers in order to more effectively fill and bleed the system. We formed the new copper brake lines with the help of a tubing bender and cutter and then slipped two threaded fittings over each of the tubes before flaring the ends to the ap­ propriate 45-degree flare (designed to mate with the existing brake lines) . Grove elaborated on this point by say­ ing, "It's not a typical AN flare, because the existing brake system was origi­ nally designed for automotive fittings. We had to adapt to that, because we wanted to match the brake lines that comes out of the airplane." Then we installed and routed the new copper brake lines from the top of the calipers directly to the brake­ line fittings at the gear legs-we felt this manner of routing would he lp protect these vulnerable soft copper lines from possible damage incurred by flying from rough grass fields. (We also decided that, at some point in the future , we would most likely re­ place the existing brake lines from the master cylinders all the way to the calipers with new lines and stan­ dard aircraft fittings.) We were in the homestretch now, and after filling the brake system

Front view of the completed disc brake conversion. Note that the STC calls for the caliper to be mounted on the aft side of the axle. with hydraulic fluid from the bottom up (we didn't even have to bleed it), I pressed down on the toe brakes and was surprised at how little travel the pedals required to engage the brakes, compared to the amount of travel they had had with the old expander­ tube brake system. After carefully in­ specting the entire installation, it was time for my favorite IA to complete and process the required FAA Form 337-Major Repair and Alteration­ and make the appropriate airframe logbook entry.

Robbie Grove, president of Grove Aircraft in EI Cajon, California.

Tried and True We eagerly rolled th e Vagabond out of the hangar, hand propped its Co ntinental , and prepared to taxi the airplane and condition the new brake pads, per Grove's instructions. (The disc side of the pads needed to have a thin, glazed layer before they could provide the best braking perfor­

Here's another view, courtesy Grove Aircraft, of the installed brake assembly. Note that we reversed the brake line routing which is acceptable per the manufacturer's instructions (see photo at far left), so that the bleeder valve would be located on the bottom of the caliper in order to more effectively fill and bleed the system.

mance, and heat produces this glaze.) We taxied around 30-40 mph, then performed a full stop and allowed the brake pads to cool. We tested the brakes' holding power by doing a full static run-up-they didn't quite hold on the first try, so we repeated the process until we were satisfied with the results. After years of flying and operating my Vagabond with the old brakes, I thought it might take me quite a while to adapt to the new ones, and I was concerned about the possibility of abruptly applying the brakes and nos­ ing the airplane over. But that wasn't the case at all-I adapted almost im­ mediately to them, and I already like the firm feel and effective (but not overly so) braking power they pro­ vide for ground maneuvering. Now my rigid-gear Vagabond can keep her vin t age 8.00-4 "pneumatic" shock absorbers while enjoying functional modern brakes. Grove Aircraft's disc brake con­ version kit is proving to be a much­ needed and practical solution to retaining the stock look of vintage Piper airplanes while giving them added reliability. For more informa­ tion , contact Grove Aircraft in El Cajon, California, by calling 619-562­ 1268 or visit them online at www. GroveAircraft·com. ....... V I N T AGE A IR P L AN E

23

Airplane T-shirts $16.99 Nylon Sporting Shirt From hi-wing to bi-wing, how manyair足 craft can you name? Made with 100% pre-shrunk cotton, comes in 2 colors. Stone Blue Jade V07921 SM V07916 SM V07922 MD V07917 MD V07923 LG V07918 LG V07924 XL V07919 XL

揃19.99 Jade V07920 2X

Autogyro T-shirt .16.99 Miss Champion autogyro flies past the Pitcairn hangar and embodies the words "It's not just a lifestyle...it's an Adventure." Machine washable, made ultra-cotton. MD LG

Cap

Logo Jlankets

$2l50

This soft fleece blanket is the coziest cover-up you'll find. Machine washable, 80% cotton! 20% polyester, and is a generous 4.5 x 6.5'. Choose from four beautiful pastel colors. V07396 Aqua V07397 Sun V07398 Columbia Blue V07399 Pink

I!ft.:rllI.,.."U Embroidered VAA logo gives this navy cap its style. fits most. V07257

Mlcroiber Jacket Touch and understand why the VAA is proud to offer this fabu足 lous jacketI Microfiber enables this jacket to withstand all weather conditions without damage or loss of function. Ughtweight and water足 repellent with elegant silver wings and tone-on-tone embroidered VAA logo of distinction. V07400 SM Blue V07406 MD Green V07410 SM Sun V07401 MD Blue V07407 LGGreen V07411 MD Sun V07402 LG Blue V07408 XL Green V07412 LG Sun V07403 XL Blue V07409 2XGreen V07413 XLSun V07404 2X Blue V07414 2X Sun

Comfort and versatility are strong style features of this VAA logo shirt. Made of 100% nylon, mesh lining and embroidered black logo. Comes in long sleeve that can be rolled or short sleeve.

.'2.95

Short Sleeve V07078 MD V07079 LG V07080 XL V07081 2X

.'6.95

Long Sleeve V07082 V07083 V07084

MD LG XL 2X

re

r eho ays

TO ORDER: 1-800路843路3612 or online at http://shop.eaa.org F.....

u.s. ..... c.ada, .. oIIIen 920-U8-5912

Wotitetl's Ktllt Jacket

t58.95

Feeling like a second skin, this 100% machine-washable cotton knit top stretches to make the most comfortable sweater/jacket you will own. Navy collar, navy stripe on cuff, and navy logo accent the horizon blue jacket. Black top has silver embroidered logo. Horizon Blue Black V07147 SM V07151 V07148 MD V07152 V07149 LG V07153 V07150 XL 54

The tone-on-tone VAA logo creates a most impressive look to these ultra soft sweaters. Four deep fall colors are perfect for adding a distinctive look to jeans or chinos. You'll want to wear it everyday. Dark Sage Dark Cherry Dark Denim Off White V07360 MD V07357 MD V07358 MD V07359 MD V07982 LG V07973 L V07976 LG V07979 LG V07983 XL V07974 XL V07977 XL V07980 XL V07984 2X V07975 2X V07978 2X V07981 2X

tSl99

Wotitatl's Mlcroiber Jacket

t54.99

This season the VAA offers you the best in fall jackets. Tone-on-tone embroidered logo looks distinctive on this luxuriously soft jacket. Double storm flap zipper front, high collar, elastic wrists and roomy hidden front pockets that zip shut are only some of this jacket's highlights. Has micromesh lining for breathability. Choose from three colors. Stone Blue Mango V07429 SM V07420 MD V07425 MD V07430 MD V07421 LG V07426 LG V07431 LG V07427 XL V07422 XL V07432 XL V07428 2X V07423 2X V07433 2X

Long sleeve dress shirt made of 60% cotton and 40% polyester is comfortable for the work week. Front and back darts make this shirt laylored for a great business look, perfect with pants or Ught Blue (blue logo) Burgundy (khaki logo) V07807 SM V07811 SM V07808 MD V07812 MD V07809 LG V07813 LG V07814 XL

Mett's fwlll Shirt tSl99 Soft 60% cottonl40% polyester make this shirt easy to care for and comfortable to wear. Looks great at casual activities and with a tie for the work week. Khaki (green logo) Black (silver logo) V07815 MD V07819 MD V07816 LG V07820 LG V07817 XL V07821 XL

tS9.99

The sky smiles upon the AirVenture grounds.

Your VAA board of directors, officers, and staff pause for a few moments after the annual membership meeting held the last day of the convention. 26

NOVEMBER 2006

dapper and pep, here's Frank Rezich ready to serve as the tour's "ride barker." He's so good I'd bet he could sell a ride to Bob Hoover! Don't worry, that stogie is never lit. He used to smoke 'em, but not anymore.

intently works to shape an aluminum dish on an English wheel in the VAA workshop tent, where folks of all ages are encouraged to try out all types of metalworking skills. The fact that she had to stand on tiptoe to see the top of the piece she was working on didn't deter her in the slightest. Experts such as Shawn Miller spend hours each day help足 ing VAA members and other visitors learn that "they can do it, too."

It's always fun to surprise someone with an award, and nobody was more flabbergasted than ace A&P mechanic and all-around good guy Bob Lock.

Bob flew in with the American Barnstonners Tour in his newly re-restored Command-Aire (shown with the Blue Angels passing overhead), accompanied by his family, including son ~--'iiiiiOIl.:-lr~-------.,..~__ Rob in his New Standard I ____= biplane from "Waldo Wright's Flying Service." During the annual Waco Club dinner, Bob was presented with the FAA's Chartes Taylor Master Mechanic Award, honoring his 50 years as an A&P. Congrat足 ulations, Bob, from all your aviation pals! VINTAGE AIRPLANE

27

the _In _n of the American Barnstonners Tour, Clay

"Pork Chop" Adams, who spent the better part of last winter putting the logistics together so the tour could come off with few hitches. He and his fellow barnstonners were great to work with as we coordinated the tour's last stop, EAA AirVenture Oshkosh. Clay is shown with VAA Treasurer Charlie Harris, who serves as the chair· man of the VAA Red Barn Interview Circle.

Californians Deb and Eric Presten and their two boys, Ben and Curtis, are all dressed up in front of John Thomason's Fairchild 22, which was flown by Eric on the American Barnstonners Tour.

The vivacious Ruth Holden emphatically tells us,"Isn't this all great!" in front of the Lockheed her flying buddy Curt "Rocky" Walters brought to the convention this year. The airplane has a family con­ nection to Ruth, as her father flew it during his time with TWA. The sleek, twin-engine aircraft, N·18137, serial number 1229, rolled off the assembly line at Lockheed's Burbank, California, plant in 1937 and was delivered to Continental Airlines. Three years later it was sold to Transcontinental and Western Air (later Trans World Airlines, or TWA). Paul E. Richter Jr., one of TWA's three founding fathers and executive vice president, did the initial test flight before purchase and then flew it to TWA headquarters in Kansas City, Missouri. Ruth is Ruth Richter Holden, and when she was told of the connection to her father by Con­ nie and Ed Bowlin who owned the airplane, she thought, "I don't have any choice; I have to buy the plane!" Paul Richter went on to pilot the Lockheed extensively as an exec­ utive transport in the early- to mid-I940s. N-18137 also was TWA's high-altitude research lab flown by notable pilot Tommy Tomlinson. 28

NOV E MBER 2006

UJ

[ij ~

One of last year's VAA volunteers of the year was John Watts of San Diego, California. John's cheerful presence at the west camping crossing has been a fixture in the area for many years, and we commem­ orated his devotion in this year's special VAA area map, created by Tom Chipley. John's the fellow with the orange vest and the stop sign. I presented John with a framed print of the map during the annual VAA volunteers' party. We'll have more on our great corps of volunteers in a later edition of Vintage Airplane.

Jeff Anderson Lewisville, NC

• 1986: First flew Beechcraft Sundowner

• 2003: Received private certificate • Currently building newer version of the great Dave Longs Midget Mustang Hunter Otey and Jeff Anderson ptepare for a Right

" Some good circumstances

of life postponed my love of aviation for

some time. Finally in September 2002 I started flying lessons and received my private certificate in September 2003 . "AUA has prompt service, fair rates, and prompt renewal notification . I purchase my aircraft insurance from the pros at AUA because they are just that, professionals! They provide answers for all my aviation needs!"

- JeH Anderson

AUA'. Exclusive EAA Vintage Aircraft .Auociaflon Insurance Program

1'IIIs happy group is gathered around the left I1Idder of the Grand Champion Antique Lockheed 12A owned by Les Whittle足 sey of Colo de Caza, California. From left to right, Steve Dotson, Neil Whittlesey, Kirk McQuown, and David Waterman. This 1939 LoCkheed Electra Junior was quite striking in its polished splendor.

products the post-Wortd War II period dominated the top spots in two of the three VAA judging categories during EAA AirVenture Oshkosh. This is Scott and Sharon Haggenmacher's expertly restored Grand Champion Classic 1946 Piper PA-12 Super Cruiser. The Haggenmachers hail from Jonesboro, Arkansas.

The E-2 Cub from the EAA collection served as one of the highlighted planes during the display honoring the 100th anniversary of Teledyne Continental Motors. An earty morning thunderstorm to the southwest of the field gave us a spectacular double rainbow.

My family thinks I'm nuts, but I just love the look of a neatly restored Tri-Pacer, and this beautiful example belongs to Ron Fancett Jr. of Waterville, New York. Apparently the VAA judges agree with me, as they awarded Ron's 1957 PA-22-150 the Grand Champion Contemporary Lindy.

30

NOVEMBER 2006

The 2007 official Vintage Airplane calendar is a collection of stunning air-to-air aviation photography showcasing some of the most remarkable airplanes of yesteryear. Each month features a classic aircraft that will be prized by anyone who appreciates the grandeur of aviation. Detailed narrative descriptions are provided with each image, plus "three-views" of the featured planes. Each month also provides key events in aviation history, on the actual date of occurrence. This 14xll-inch, full-color wall calendar is the perfect giftfor all VAA members and their families.

- ,

To order, mail your check/money order to:

VAA 2007 Calendar c/o Turner Publishing Company

P.O. Box 3101 • Paducah, KY 42002-3101

Send me _ _ copies of the VAA 2007 Calendar, Only $15.95 each. The VAA 2007 Calendar is the 3rd I 0 Add $3.95 shipping first calendar; $1 each add'l copy. Annual Calendar published by the I 0 Ky residents add 6% sales tax. Vintage Aircraft Association and

TOTAL ENCLOSED $____________ Turner Publishing Company.

EASY TO ORDER

I Your Name I -----------------------------------------------------I Address

By Phone: 1-800-788-3350 1-------------------------­ On the Web: State Zip I City www.turnerpublishing.com VisalMastercard Accepted

I Phone L. __

--

E-mail (for order confirmation)

- - - - -

-

VINTAGE AI RPLANE

~

3 1

32

NOVEMBER 2006

Left: Santos-Dumont 14bis Replica Embraer sponsored a grand tent housing one of the two replicas built to commemorate the 100th anniver­ sary of the flight of the 14bis. It was constructed by Brazilian Alan Calassa, with assistance from Embraer, the Brazilian Aerospace Museum of Rio de Janeiro, with additional technical guidance from the Brazilian air force command. A great deal of research had to go into the construction, as no original drawings remained (late in his life, a despondent Santos-Dumont destroyed all his papers). Here are a few detail shots of one of the replicas while it was on display at EAA AirVen­ ture Oshkosh.

GET THE SKILLS

TO GET IT BUILT

AT EM SPORTAIR WORKSHOPS

A The construction reproduction was quite interesting. The wheel on the top of the fuselage, next to the pilot's wicker-basket cockpit is for elevator control. Next to the fuselage sides are a pair of radiators. The narrow tread landing gear has a set of rubber strip shock-absorbing cords.

B Looking forward from the aft end of the 14bis, you can see the brazed tee fittings used to couple the bamboo structure. The 50-hp Antoinette engine is a real gem, beautifully restored and looking like it was ready to start. The videotape of the flight of the 14bis replica shows it is flown with a different engine, apparently a Rotax two-cycle engine. Photos of the fly­ ing replica also show a Rotax with a smaller, high-revving prop. According to local accounts, while Santos-Du­ mont flew the 14bis for a total of 20 minutes, Alan Calassa and his daugh­ ter, Aline, have flown the replica more than 50 hours.

GET YOUR HOMEBUILDING PROJECT OFF THE GROUND BY SIGNING UP FOR EAA' SSPORTAIR WORKSHOPS NOV. 3-5

FREDERICK, MD

NOV. 10-12 OSHKOSH, WI

- Repairman (LSA) Inspedion-Airplone

NOV. 10-12 GRIFFIN, GA

- 116 Welding

NOV. 18-19 WATSONVlW, CA

- RV Assembly

DEC. 1-3

WPALM BEACH, Fl - Repairman (LSA) InspecIion-Airplone

DEC. 2-3

CORONA, CA

JAN. 27-28 OSHKOSH, WI

C A couple of desks were used to display detailed parts of the replica, including a pair of propeller blades. Fantastic workmanship!

- Repairman (LSA) Inspedion-Airplone

- RV Assembly

• FabrK Covering • Sheet Metal Busies • EIedria-j Syslems &Aviolics • Composite ConsIruction etntrodudion to Airaoft Buikq • Gus

VISIT WWW.SPORTAIR.(OMOR CALL 1-800-967-5746 fOR DETAILS

EAA

WORKSHOPS

--~ --

EAA SportAir Sponsors:

~51~ www.klelntools.com

tim .-EE1. VINTAGE AIRPLANE

33

BY DOUG STEWART

Survival In the previous two articles I have written about events that transpired this past July 30, the last day of EAA Air­ Venture Oshkosh 2006. I have one more event I would like to discuss. On that day a private pilot departed Oshkosh in his just-purchased Legend Cub. The pilot had neither a current flight re­ view nor a tailwheel endorsement. He did, however, make arrangements to have with him a pilot with airline transport and flight instructor certifi­ cates (ATP/CFI) to fly the airplane to an airport in Ohio. Unfortunately, the new owner of that Cub never got to experience the wheels of his airplane touching down in Ohio. According to the preliminary ac­ cident report on file with the Na­ tional Transportation Safety Board, the {/ ATP/CFI reported that during the flight, they became concerned re­ garding the fuel level on the airplane. He stated they were flying along the lakefront and decided to turn toward the Gary-Chicago International Air­ port (GYY) in Gary, Indiana. A short time later the engine lost all power and an off-shore landing was made." Both the private pilot and the ATP/ CFI survived the impact and were able to exit the aircraft; however, the private pilot drowned before being able to reach the shore. r know that I am not the only one to wonder how they managed to run out of fuel such a short distance from their departure point of Wittman Field, but I hope I am not the only one 34

NOVEMBER 2006

to wonder why they didn't have PFDs (persona l flotation devices) or some other type of flotation device onboard if they we re plan n ing on flying be­ yond gliding distance from shore over Lake Michigan.

What is the first thing that comes to your mind when thinking about having to survive after a forced landing? I also know some pilots don't give a thought to the fact they might have to park their airplane somewhere other than on an airport and therefore make no preparations whatsoever for that eventuality. They don't bring flotation gear if they'll be flying over water be­ yond gliding distance to shore, and they don't bring water, rations, warm clothes, or a basic kit of survival tools when flying over remote areas. No matter how good our piloting and decision-making skills might be, there is always the chance that even

the best of us might have to either ditch our airplane or park it in a re­ mote area. If our piloting skills are at good, proficient levels, the odds of our surviving the forced land­ ing (some might call it a controlled crash) are good. However, unless we have the serendipity of being able to find a landing site close to civiliza­ tion, the problems of survivability af­ ter the forced landing could very well be the thing that makes the fatality column of the accident reports. What is the first thing that comes to your mind when thinking about having to survive after a forced land­ ing (when there are no serious in­ juries)? Many people will think of water. Some will think of food. Oth­ ers will think of the necessity of first aid equipment. However, those who responded with the ability to keep warm and, if at all pOSSible, dry have thought of absolutely the most im­ portant thing in surviving after a forced landing in remote areas. The need to avoid hypothermia is one of the most critical issues we face when having to survive after a forced land­ ing in any remote or inaccessible area, including a ditching. If we have to ditch our aircraft, be it in a lake or perhaps even the ocean, it is quite possible that swimming to shore will be out of the question . We're not going to be able to keep dry, but there are things we can do to keep warm and stave off the onset of hypothermia. The need to assume

the "heat escape lessening position" is critical. This position is assumed by holding your arms tightly to the sides of your chest, crossing your forearms over your chest, and draw­ ing up your legs and crossing them at the ankles. This position closes off most major heat-loss areas. If there are several people involved, hud­ dling close, side to side in a circle, will also help preserve body heat. If you have a hat, put it on, as the head is a major heat-loss area. Flotation gear can certainly help a person stay alive longer in cold wa­ ter because it allows the person to float without the expenditure of en­ ergy. What energy is used can be used exclusively for moving toward shore rather than trying to stay afloat. Any activity will quicken the body's heat loss, thus only that activity necessary for survival should be used. If your forced landing has been in a remote area, you are better off if you stay with the airplane. (Of course, if you have ditched, staying with the aircraft will be rather difficult, unless you are good at holding your breath.) It will be much easier for rescue per­ sonnel to locate the downed aircraft than it will be for them to find you if you are not with the airplane. The airplane could serve as a source of shelter as well as fuel for starting a fire. (Even if you crashed because you ran out of fuel, you might be able to get to that "unusable fuel" to help you start afire.) Again, staying warm and dry should be your major objective in sur­ viving. Obviously, clothing appropri­ ate to the season and environment is important here, yet I so often see folks go flying in street clothes, with nary a thought of how they will keep warm and dry if they have a forced landing far from any airport. It will also help if you carry some kind of fire-start­ ing tools. All too often matches or a lighter might not be up to the task. Better are some of the variety of fire­ starting kits, including tinder. Two other tools that I think are im­ perative are a knife and a Signaling device. There are inexpensive polycar­

of these landings are survivable, yet bonate signaling mirrors now avail­ able that can easily fit in your pocket too many pilots become fatal statistics and that are easy to use. However, even because they were not prepared for sticking an old CD-ROM in the seat the chore of surviving after the crash. So please do what you can to be back pocket could be the thing that allows you to alert search-and-rescue prepared, even when you have ... blue personnel to your position. Hopefully skies and tail winds. you have carried potable water with you in the aircraft. Our bodies can sur­ Doug Stewart is the 2004 National CFI vive for quite some time without food, ofthe Year, a Master Inst11lctor, and a des­ but without water our survival time is ignated pilot examiner. He operates DSFI greatly reduced. Furthermore, it might Inc. (www.DSFlight.com) based at the be a good idea to carry some type of Columbia County Airport (lBl). . . . . water purification tablets as well, especially if you will be flying over more Flight Control Cables remote areas. If you bring food with Custom Manufactured! you, be sure it is high in carbohydrates and fats rather than sugar. If you do choose to attempt to "hike out," remember that you can take the emergency locator transmit­ ter (ELT) with you, which will aid Each Cable is Proof Load Tested (SAR) teams in finding you. Speak­ and Prestretched for Stability ing of ELTs, monitoring of those * Quick Delivery ELTs transmitting on 121.5 will end in February 2009. Furthermore, the *Reasonable Prices performance of 121.5 ELTs is really *Certification to MIL-T-6117 somewhat dismal. It might take as & MIL-C-5688A much as five hours before an SAR 1/16" to 1/ 4" team is alerted to the signal. Much * Certified Bulk Cable and

better, although admittedly more ex­ pensive, are the 406 MHz ELTs and Fittings are Available

PLBs (personal locator beacons). """'-McFarlane" Some of these are linked to a GPS to give out latitude/longitude coordi­ McFarlane Aviation Products nates that will hasten your rescue. McFarlane Aviation, Inc. Many folks think that having a cell 696 E. 1700 Road Baldwin City, KS 66006

phone is a good idea, and perhaps in 800-544-8594

some parts of this country that might Fax 785-594-3922

be true. (But certainly not where I live. www.mcfarlaneaviation.com

sales@mcfarlaneaviation.com

If you crashed in the field behind my house, you would never, ever get a sin­ V/~ gle bar on your cell phone.) If you will be flying in more remote areas, it might 1 - - - - - - - - - - - - - - - - - ­ be wise to invest in a satellite phone,

which will get reception even in the

most remote parts of this planet.

Obviously I can only scratch the surface in this brief discussion of sur­ vival. Hopefully, it can at least stimu­ late further research on the subject. Sadly, many of the forced landings that pilots make come as a result of poor planning. (There is almost one incident per day of a pilot running out of fuel.) The statistics show that most

1.=============::::;--­

q

~r

*

831

lisal

VINTAGE AIRPLANE

35

BY H.G. FRAUTSCHY

THIS MONTH'S MYSTERY PLANE PHOTO COMES TO US FROM THE

EAA LIBRARY ARCHIVES.

THE AIRCRAFT IS OF FOREIGN ORIGIN.

Send your answer to EAA, Vintage Airplane, P.O. Box 3086, Oshkosh , WI 54903-3086. Your answer needs to be in no later than December 10 for inclusion in the February 2007 issue of Vintage Airplane.

You can also send your response via e-mail. Send your answer to mysteryplane@eaa.org. Be sure to include your name, city, and state in the body of your note, and put "(Month) Mystery Plane" in the subject line.

AUGUST ' S MYSTERY VAA member Wesley R. Smith of Springfield, Illinois, ha s been on a Mystery Plane roll this year. His was the only correct answer we received concerning th e Au gust Mystery Plane, which was supplied to us from the Hal Swanson collection. Here's Wesley's note: 36

NOVEMBER 2006

The August 2006 Mystery Plane, which appears on Page 36, is in fact a (possib ly the only) 1926 Fokker B.IIIc flying boat. The Hal Swanson album photo is identical to the photo which appears on Page 179 ofFokker-the Man and the Aircraft (Bruce Robertson, Harleyfordl Aero Publishers Inc., 1961). According

ANSWER to the text, the B.Il! was powered by a 450-hp Napier Lion. Span: 59 feet (up足 per); length: 39.1 feet; height: 13.0 feet; weight: 4,115 pounds (empty), 6,754 pounds (gross); and speed: 112 mph. The top wing was conventional wood and fabric with plywood leading edge. The lower wing was entirely covered with plywood.

View more than 170 airplanes and 20,000 historic aviation artifacts at one of the finest aviation museums in the world.

Members get in FREE!

www.airventuremuseum.org Phone: (920) 426-4818

Email: museum@eaa.org

The 1926 Fokker B.llle flying boat. The B.1lI was preceded by the B.I and B.II. The B.flJc (i.e., civil") had an en­ closed cabin (just aft of where the lIn­ identified man is sitting). The B.lIIc also had a higher gross weight than the mili­ tary B.llI (6,810 pounds). 1 do not know how many B.lllcs were constructed, but only a single military B.lII was built. Following th e B.lll came the B.IV (F.l1), of which only a single exa m­ ple was constructed dllring 1928. The /I

seven-place B.IVa (F.ll a) was bllilt in the United States and sold in some num­ bers during 1928-29. A l/72nd three-view drawing of the B.m also appears on Page 136 of Rob­ ertson 's book. The October 1996 issue o(Skyways (No. 40) apparently has an article on the B.flJe. Lik e the JlIn e and Jul y Mystery Planes, 1 thoroughly enjoyed tracking this one down.

/\1 RVENTURE MUSEUM

~

AERO CLASSIC

"COLLECTOR SERIES"

Vintage Tires New USA Production

Just Like in the Good Old Days AD the Randolph products, aD the Randolph colors, aD the Randolph quality. An aviation icon is back on the market again... to stay.

Show off your pride and joy with a fresh set of Vintage Rubber. These newly minted tires are FAA-TSO'd and speed rated to 120 MPH. Some things are better left the way they were, and in the 40's and 50's, these tires were perfectly in tune to the exciting times in aviation. Not only do these tires set your vintage plane apart from the rest, but also look exceptional on all General Aviation aircraft. Deep 8/32nd tread depth offers above average tread life and UV treated rubber resists aging. First impressions last a lifetime, so put these bring back the good times..... New General Avia tion Sizes Available:

500 x 5, 600 x 6, 700 x 8

Oesser has the largest stock and selection of Vintage and Warbird tires in the world. Contact us with

800-362-3490/t Or e-mail us at iofo@ raodolpbaircraft.com

~~ ~~

VINTAGE AIRPLANE

37

Something to buy,

sell,

or trade?

Classified Word Ads: $5.50 per 10 words, 180 words maximum, with boldface lead-in on first line. Classified Display Ads: One column wide (2.167 inches) by 1, 2, or 3 inches high at $20 per inch. Black and white only, and no frequency discounts. Advertising Closing Dates: 10th of second month prior to desired issue date (i.e., January 10 is the closing date for the March issue). VAA reserves the right to reject any advertising in conflict with its policies.

Subscribe to e-Hot Line, EMs free weekly members­ only electronic newsletter. To start receiving e-Hot Line

Rates cover one insertion per issue. Classified ads are not accepted via

visit the members only site at

phone. Payment must accompany order. Word ads may be sent via fax

www.eaa.org. ~)

(920-426-4828) or e-mail (classads@eaa.org) using credit card payment (all cards accepted). Include name on card, complete address, type of card, card number, and expiration date. Make checks payable to EAA. Address advertising correspondence to EAA Publications Classified Ad Manager, P.O. Box 3086, Oshkosh, WI 54903-3086 Airplane T-Shirts

150 Different Airplanes Available

WE PROBABLY HAVE

YOUR AIRPLANE!

www.airplanetshirts.com

1-800-645-7739

Flying wires available. 1994 pricing. Visit www.flyingwires.com or call 800­ 517-9278.

BABBITT BEARING SERVICE - rod bearings, main bearings, bushings, master rods, valves , piston rings. Call us Toll Free 1-800-233-6934, e­ mail ramremfg@aol.com Website www.ramengine .com VINTAGE ENGINE MACHINE WORKS, N. 604 FREYA ST., SPOKANE, WA 99202

THERE'S JUST NOTHING LIKE IT

ON THE WEB!!

www.aviation -giftshop.com

A Website with the Pilot in Mind

(and those who love airplanes)

LET BRENCO HELP YOU GET YOUR IA CERTIFICATE-Brenco has a 25 year history of training A&P's to obtain their Inspection Authorization. Courses are offered every year in Battle Creek MI, Columbus OH, Kenosha WI and Rockford IL. Call 1-800-584-1392 for additional information

Warner engines. Two 165s, one fresh O.H., one low time on Fairchild 24 mount with all accessories. Also Helton Lark and Aeronca C-3 project. Find my name and address in the Officers and Directors listing and call evenings. E. E. "Buck" Hilbert.

CUSTOM PRINTED T-SHIRTS for your flying club, flight shop, museum. Free samples . Call 1-800-645-7739 or 1­ 828-654-9711

A&P I.A.: Annual, 100 hr. inspections.

Wayne Forshey 740-472-1481

Ohio - statewide.

38

NOVEMBER 2006

*WWW.AEROSPACEFACTS.COM

*is the first aerospace website where

you can find relevant information quick and easy JUST TRY IT .. .

EAA/

STATEMENT OF OWNERSHIp, MANAGEMENT, AND CIRCULATION (Required by 39 U.S.C. 3685). 1. Title of Publication : Vintage Aircraft 2. Publication NO .: 0062·750 3. Filing Date: 10/16/06 4 . Issue Frequency: Monthly. 5. No. of Issues Published Annually : 12. 6. Annual Subscription Price: $36.00 in U.S. 7. Known Office of Publication: 3000 Poberezny Road, Oshkosh, WI 54902·8900. Contact Person : H.G. Frautschy, Telephone: 920-426-4825 8. Headquarters or General Business Office of the Publisher: Same as above. 9. Publisher: Tom P. Poberezny, 3000 Poberezny Road , Oshkosh , WI 54902·8900 . Editor: Henry G. Frautschy, 3000 Poberezny Road, Oshkosh , WI 54902· 8900. Managing Editor: Kathleen Witman, 3000 Poberezny Road, Oshkosh, WI 54902·8900. 10. Owner: Experimental Aircraft Association, 3000 Poberezny Road, Oshkosh , WI 54902·8900. 11. Known bondholders, mortgagees, and other security holders owning or holding 1 percent or more of total amounts of bonds, mortgages or other securities: None. 12. Tax Status: Has Not Changed During Preceding 12 Months . 13. Title: Vintage Airplane. 14. Issue date for circulation data below: September 2006. 15. Extent and Nature of Circulation (Average No . Copies Each Issue During Preceding 12 Months/ No. Copies of Single Issue Published Nearest to Filing Date) : a . Total No. of Copies Printed (9 , 246/8,351) b . Paid and/or Requested Circulation: 1 . Paid/Requested Outside·County Mail Subscriptions Stated on Form 3541 (7 ,594/7,222). 2. Paid In·County Subscriptions (O/O). 3. Sales Through Dealers and Carriers , Street Vendors, Counter Sales, and Other Non· USPS Paid Distribution (431/343). 4. Other Classes Mailed Through the USPS (125/153). c. Total Paid and/or Requested Circulation (8,150/7,718) . d. Free Distribution by Mail: 1. Outside·County as Stated on Form 3541 (O/O). 2. In-County as Stated on Form 3541 (O/O). 3. Other Classes Mailed Through the USPS (103/90). e. Free Distribution Outside the Mail (477 /O). f. Total Free Distribution (580/ 90). g. Total Distribution (8,730/7,808). h. Copies not Distributed (516/543). i. Total (9,246/8,351). j. Percent Paid and/or Requested Circulation (93%/99%). 16 . Publication of Statement Ownership: Publication required . Will be printed in the November 2006 issue of this publication . 17. I certify that all information furnished on this form is true and complete . Editor: H.G . Frautschy, 10/16/06.

Your One

The following list of comi ng events is furnished to o l1r readers as a matter of information only and does not constitute approval, sponsorship, involvement, control, or directio n of any event (fly-in, seminars, fly market, etc.) listed. To submit an event, send the information via mail to: Vintage Airp lan e, P.O. Box 3086, Oshkosh, WI 54903-3086. Or e-mail th e information to: vintageaircraft@eaa.org. Information should be received fOllr months prior to the event date.

STOP Quality Shop

1-BBB-3BB-BB03

1-7B0-447-5955

Call Today For Our New Catalog

Exhaust Systems Carb Air Boxes Structural Assemblies Clamps & Hardware Round Engine Exhausts Engine Mounts Fuel Cells Heaters www.ecomweldlng.com

All Makes & Models

2007 MAJOR FLy-INS For details on EAA Chapter fly-ins and other local aviation events, visit W\W{.eaa.orgjevents U.S. Sport Aviation Expo Sebring Regional Airport, Sebring, Florida January 11·14, 2007 www.Sport·Aviation-Expo.com Sun 'n Fun Ry-In Lakeland Linder Regional Airport (LAL), Lake­ land, Florida April 17-23, 2007 www.SUlrN-Fun.org

7469$19.99 Golden West EAA Regional Ry-In Yuba County Airport (MYV), Marysville, California June 8-10, 2007 www.GoldenWestRyln.org

h raised Vintage logo deco­ rates this antique brass 3" x 2" oval belt buckle. It fits a 1.5" wide belt. A great gift idea!

TO ORDER

1-800-843-3612 From U.S. and Canada All others 920-426-5912

or online at http:/ /shop.eaa.org

Get ready for fall with this soft fleece jacket with the Vintage Association logo embroidered in gold and navy. 100% wash­ able polyester, full zipper and elastic wrist and waist. Has two front zipper pockets.

Wisconsin July 23-29, 2007 www.AirVenture.org

V07415 MD V07417 XL V07416 LG V07418 2X TO ORDER

1-800-843-3612 From U.S. and Canada, all others 920-426-5912

or online at

http://shop.eaa.org

VINTAGE AIRPLANE

39

Membershi~ Services V INTAGE

AIRCRAFT

ENJOY THE MANY BENEFITS OF EAA AND EAA VINTAGE AIRCRAFT ASSOCIATION THE ASSOCIATION

O F FICERS President

Vice-President

Geoff Robison

1521 E. MacGregor Dr. New Haven, IN 46774 260-493-4724 chie{7025@aol.com

Secretary Steve Nesse

George Daubner

2448 Lough Lane Hartford, WI 53027 262-673-5885 vaa{1yboy@msfJ.com Treasurer

2009 Highland Ave. Albert Lea, MN 56007 507-373-1674 stnes@deskmedia.com

Charles W. Harris

7215 East 46th SI. Tulsa, OK 74147 918-622-8400 cwh@hv5u.com

DIRECTORS Steve Bender

Jeannie Hill

85 Brush Hill Road Sherborn, MA 01770 508-653-7557

P.O. Box 328 Harvard, IL 60033-0328 815-943-7205

sst JQ@comcast.net

dinghao@owc.l1et

David Bennett

375 Killdeer Ct Lincoln, CA 95648 916-645-8370

Espie "Butch" Joyce 704 N. Regional Rd. Greensboro, NC 27409 336-668-3650

ulltiqller@inreacll.com

windsock@aol.com

John Berendt

Steve Krog

7645 Echo Point Rd. Cannon Fa ll s, MN 55009 507-263-2414

1002 Heather Ln.

Hartford, WI 53027

262-966-7627

mjbfclJld@rconnect. com

sskrog@ao/,coln

Dave Clark

635 Vestal Lane Plainfield, IN 46168 317-839-4500

Robert D. "Bob" Lumley 1265 South 124th St. Brookfield, WI 53005 262-782-2633

davecpd@iqllest.net

lumper@execpc.com

John S. Copeland lA Deacon Street

Gene Morris 5936 Steve Court

Northborough, MA 01532 508-393-4775

Roanoke, TX 76262 817-491-9110

copeland l@jllllo. com

gellemorris@Charter.lIet

Phil Coulson 28415 Springbrook Dr. Lawton, MI 49065 269-624-6490

1429 Kings Lynn Rd Stoughton, WI 53589 608-877-8485

rcollison516@cs.com

ciar@aprilaire.com

Dale A. Gustafson

S.H. "Wes" Schmid 2359 Lefeber Avenue

Dean Richardson

7724 Shady Hills Dr. Indianapolis, IN 46278 317-293-4430

Wauwatosa, \-VI 53213

daie{aye@msn.(om

shschmid@milwpc.com

414-771-1545

DIRECTORS

EMERITUS

21 S9 Carlton Rd. Oshkosh, WI 54904 920-231-5002

E.E. "Buck" Hilbert 8102 Leech Rd. Union, Il60180 815-923-4591

GRCHA@cllarter.lIet

buck7I1C@dis.l1et

Gene Chase

Ronald C. Fritz

15401 Sparta Ave. Kent City, MI 49330 616-678-5012 rFritz@patllwaYIlt'l.com

Directory

~

EAA Aviation Center, PO Box 3086, Oshkosh WI 54903-3086

Phone (920) 426-4800

Fax (920) 426-4873

Web Sites: www.vintageaircraft.org, www.airventllre.org, www.eaa.org/memberbenefits

E-Mail: vintageaircraft@eaa.org EAA and Division Membership Services Flying Start Program ............ 920-426-6847 800-843-3612 ............. FAX 920-426-6761 Library Services/Research ... . .... 920-426-4848 (8:00 AM-7:00 PM Monday-Friday CST) Medical Questions.............. 920-426-6112

. New/renew memberships: EAA, Divisions Technical Counselors .. .... .. ... 920-426-6864 (Vintage Aircraft Association, lAC, Warbird5), Young Eagles .................. 877-806-8902 National Assodation of Flight Instructors Benefits (NAFl) AUA Vintage Insurance Plan ... .. 800-727-3823 •Address changes EAA Aircraft Insurance Plan ..... 866-647-4322 · Merchandise sales Term Life and Accidental ........ 800-241-6103 ·Gift memberships Death Insurance (Harvey Watt & Company) EAA Platinum VISA Card . . 800-853-5576 ext. 8884 Programs and Activities EAA Aircraft Financing Plan .... 866-808-6040 EAA AirVenture Fax-On-Demand Directory ............................. 732-885-6711 EAA Enterprise Rent-A-Car Program . ......................... 877-GA1-ERAC

Auto Fuel STCs ................ 920-426-4843

Build/restore infonnation ........ 920-426-4821 Editorial .. .... . ............... 920-426-4825

Vintage................... FAX 920-426-6865

Chapters: locating/organizing .... 920-426-4876 • Submitting article/photo Education ........... . ......... 888-322-3229

• Advertising information • EAA Air Academy • EAA Scholarships Flight Advisors infonnation ...... 920-426-6864 Flight Instructor information ..... 920-426-6801

EAA Aviation Foundation Artifact Donations ............. 920-426-4877 Financial Support ............. 800-236-1025

MEMBERSHIP INFORMATION EAA Membership in the Experi mental Aircraft Association, Inc. is $40 for one year, includ­ ing 12 issues of SPORT AVIATION. Family membership is an additional $10 annually. Junior Membership (under 19 years of age) is available at $23 annually. All major credit cards accepted for membership. (Add $16 for Foreign Postage.)

EAA SPORT PILOT Current EAA members may a dd EAA SPORT PILOT magazine for an additional $20 per year. EAA M embe rship and EAA SPORT PILOT maga zine is available for $40 per year (SPORT AVIATION magazine not in­ cluded). (Add $16 for Foreign Postage.)

VINTAGE AIRCRAFT ASSOCIATION C urrent EAA members may join the Vintage Aircraft Association and receive VINTAGE AIRPLANE magazine for an ad­ ditional $36 per yea r. EAA Membership, VINTAGE AIRPLANE magazine and one year membership in the EAA Vintage Aircraft Association is available for $46 per year (SPORT AVIATION magazine not in­ cluded). (Add $7 for Foreign Postage.)

lAC

C urrent EAA members may join the Internationa l Aerobatic C lub, Inc. Divi­ sion and receive SPORT AEROBATICS magazine for an additional $45 per year. EAA Membership, SPORT AEROBAT­ ICS magaZine and one year membership in the lA C Division is available for $55 per year (SPORT AVIATION magaZine not included). (Add $18 for Foreign Postage.)

WARBIRDS Current EAA members may join the EAA Warbirds of America Division and receive WARBIRDS magazine for an additional $45 per year. EAA Membership, WARBIRDS maga­ zine and one year membership in the Warbirds Division is available for $50 per yea r (SPORT AVIATION magaZine not in­ cluded). (Add $7 for Foreign Postage.)

FOREIGN MEMBERSHIPS Please submit you r remittance with a check or draft drawn on a United States bank payable in United States dollars. Add required Foreign Postage amount for each membership.

Membership dues to EM and its divisions are not tax deductible as charitable contributions

Copyrighl 02006 by the EM Vintage Aircraft Association, All rights res9fVec. VINTAGE AIRPLANE (USPS 062-750: ISSN 0091-6943) is publishec and owned exclusively by the EM Vintage Aircraft Association of the Experimental Aircraft Association and is publishec monthly at EM Avia­ tion Center, 3000 Poberezny Rd.. PO Box 3086, Oshkosh. Wisconsin 54903-3086, e-mail: vintageaircraft@eaa.org. Membership to Vintage Aircraft Association, which includes 12 issues of Vintage Airplane magazine, is $36 per year for EM members and $46 for non-EM members. Periodicals Postage paid at Oshkosh, Wisconsin 54901 and at additional mailing offices. POSTMASTER: Send address changes to Vintage Airplane, PO Box 3086, Oshkosh, WI 54903-3086. PM 40032445 Return undeliverable Canadian addresses to World Distribution Services, Station A, PO Box 54, Windsor, ON N9A 6J5, e-mail: cpcretums@Wdsmail.com. FOR­ EIGN AND APO ADDRESSES - Please allow at least two months for delivery of VINTAGE AIRPLANE to foreign and APO addresses via surtace mail. ADVERTISING - Vintage Aircraft Association does not guarantee or endorse any product offered through the advertising. We invite constructive criticism and welcome any report of inferior merchandise obtained through our advertising so that corrective measures can be taken.

EDITORIAL POLICY: Readers are encouragec to submit stories and photographs. Policy opinions expressec in articles are solely those of the authors. Responsibility for accuracy in reporting rests entirely with the contributor. No remuneration is made. Material should be sent to: EdITor, VINTAGE AIRPLANE, PO Box 3086, Oshkosh, WI 54903-3086. Phone 920-426-4800. EM® and EM SPORT AVIATION®, the EM Logo® and Aeronautica'" are registered trademarks. trademarks. and service marks of the EXperimental Aircraft Association, Inc. The use of these trademarks and service marks without the permission of the EXperimental Aircraft Association, Inc. is strictly prohibitec. 40

NOVEMBER 2006

Even though your vehicle keeps all of its wheels on the ground, you still want to fill your tank

as seldom as possible. Performing scheduled maintenance with Genuine Ford and Lincoln Mercury

Parts & Service helps to improve gas mileage and keeps your car or truck running smoothly.

No one knows your vehicle better than our factory-trained technicians.

We're better. We're proving it. And we want you to be the judge.

Visit your Ford or lincoln Mercury Dealership today!

GENUINE

PARTS & SERVICE

www.genuineFLMservice .com