Issuu

CONSTRUCTION & GENERAL INDUSTRY | HEALTHCARE | MARITIME | DISASTER SITE | OIL & GAS

SAFETY & HEALTH TRAINING 2026 SPRING TRAINING CATALOG

Promote Your Certification with

DIGITAL BADGES

CONSTRUCTION TRAINING OSHA Standards for the Construction Industry [OSHA #510] SEE PG. 8

Fall Protection

[OSHA #3115] SEE PG. 19

Excavation, Trenching, and Soil Mechanics [OSHA #3015] SEE PG. 20

Electrical Standards

[OSHA #3095] SEE PG. 20

HEALTHCARE TRAINING TO MEET THE DEMAND NEW! Occupational Safety and Health Hazards in The Healthcare Industry [OSHA #3365] SEE PG. 21 UPDATED Principles Of Ergonomics

[OSHA #2255] SEE PG. 19

NEW! HAZWOPER 40-Hour for Healthcare [HM 242] SEE PG. 30 NEW! Energy-Based Safety

[SH 688] SEE PG. 28

Evening Classes Available SEE PAGE 47

EXCELLENCE AND ACHIEVEMENT ABOUND

The University of Texas at Arlington remains one of the nation’s top universities, recognized by U.S. News & World Report for its commitment to academic excellence, student success, and accessibility. These accolades affirm UTA’s status as a leading institution for intellectual pursuits and a catalyst for positive change. Our training programs are highly regarded by employers, employees, and industry leaders alike.

SERVING THE DALLAS REGION

TEXAS | OKLAHOMA | NEW MEXICO - THE OSHA EDUCATION CENTER AT UTA As a leading OSHA Education Center, UTA is expanding its delivery of safety and health courses, offering new classroom locations, virtual instructor-led live training, evening courses, online training opportunities, and contract training. Our courses are taught by industry experts with real-world experience and insight as well as extensive technical and OSHA knowledge. We will customize our training for your organization. No matter the delivery method you choose, course attendees can earn continuing education units (CEUs) and apply them to our professional certificates. Specialist in Safety & Health | Pages 4-5

SSH SPECIALIST IN SAFETY & HEALTH

» General Industry

» Port Safety

» Construction Industry

» Oil & Gas

» Risk Management

» Fire Safety

» Healthcare

» Disaster Response

Safety, Health & Environmental Professional | Page 6 SHEP SAFETY, HEALTH & ENVIRONMENTAL PROFESSIONAL

» Warehousing

Certified Safety & Health Official | Page 5 CSHO CERTIFIED SAFETY & HEALTH OFFICIAL

» Construction Industry » General Industry » Healtchcare

The University of Texas at Arlington | OSHA Education Center

» Safety & Health

» Risk Management

Master Certification | Page 6

MC MASTER CERTIFICATION

» Environmental

» Safety & Health

» Risk Management » Environmental

Safety & Health Fundamentals | Page 7 » Construction Industry

» General Industry » Maritime

Accident Investigation Certificate & Boot Camp | Page 29

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

TABLE OF CONTENTS Features

Live Webcasts

Outreach Training Program.................................................... 16 UTA Authorized Safety & Health Trainer Program �� 26 Contract Training............................................................... 32-36 Virtual Training................................................................................. 48-49 Evening Classes..................................................................... 47 Free Training.......................................................................... 50 Cursos de OSHA (Spanish Courses)........................... 50, 52-55 Policies and Procedures......................................................... 51 Español Catálogo (Spanish Catalog)................................ 52-55

Participants wishing to register in OSHA-numbered live webcast courses must live or work in OSHA’s Dallas Region (Texas, Oklahoma, and New Mexico). UTA Outreach trainers are permitted to attend the live webcast trainer update classes regardless of their location. Call 866-906-9190 to register.

Technical Requirements:

No software download is required to attend live webcasts; however, participants are required to have a PC or Mac computer with audio and video capabilities, and an uninterrupted internet connection.

Course Descriptions/Schedules by Course Construction OSHA Courses................................................. 8-9 General Industry OSHA Courses.......................................10-11 Outreach Trainer Update Courses.................................... 12-13 OSHA Maritime Courses........................................................ 14 Disaster Site Courses............................................................. 15 Other OSHA Courses........................................................ 17-21 OSHA Short Courses........................................................ 22-25 Risk Management Courses.................................................... 27 Safety & Health Management Courses............................. 28-29 Accident Investigation Courses.............................................. 29 Hazardous Materials Courses................................................ 30 Healthcare Courses................................................................ 31 Life Safety/Fire Safety Courses.............................................. 31 Army SOH Functional Program (CP-12) Courses �� 34 Public Works Institute (PWI).............................................. 38-39 Environmental Training Institute (ETI)............................... 40-42

FIND TRAINING OPPORTUNITIES IN THE CATEGORIES BELOW:

Course Schedules Schedule by Course............................................................ 8-42 Schedule by Location........................................................ 43-49

Earn a

DIGITAL BADGE

CONSTRUCTION

MANAGEMENT

GENERAL INDUSTRY

RISK MANAGEMENT

MARITIME

DISASTER RESPONSE

SYSTEM SAFETY

ENVIRONMENTAL

HAZARDOUS MATERIALS

LIVE WEBCASTS

HEALTHCARE

PRE-RECORDED ONLINE TRAINING

See the schedule on page 44.

Promote Your Certification with a Digital Badge The University of Texas at Arlington’s Extension and Extended Campus has partnered with Credly to offer digital badges for all of our safety and health classes and certificate programs.

Showcase Your Achievments

Microcredentials for Recognition

Boost Your Professional Profile

Virtually Accessible

Enhanced Career Opportunities

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

Verified Credibility

866-906-9190 | uta.edu/ded/osha

CERTIFICATION PLANNING GUIDE

SSH SPECIALIST IN SAFETY & HEALTH

SPECIALIST IN SAFETY & HEALTH

The Specialist in Safety and Health (SSH) is designed to give participants the foundational knowledge they need in the safety field, with an emphasis on their choice of industry.

GENERAL INDUSTRY REQUIRED (1) n OSHA #511 ELECTIVES (3) n OSHA #521 n OSHA #2015 n OSHA #2045 n OSHA #2225 n OSHA #2255 n OSHA #2264 n OSHA #2455 n OSHA #3085 n OSHA #3095

Standards for General Industry................ 10

n OSHA #3115

Fall Protection.......................................... 21

Guide to Industrial Hygiene..................... 17 Hazardous Materials................................. 17 Machine Guarding................................... 18 Respiratory Protection.............................. 18 Principles of Ergonomics.......................... 19 Confined Space........................................ 19 S&H Management Program.......................19 Principles for Scaffolding......................... 21 Electrical Standards.................................. 20

CONSTRUCTION INDUSTRY REQUIRED (1) Standards for Construction............................. 8 n OSHA #510 ELECTIVES (3) n OSHA #2015 Hazardous Materials................................... 17 n OSHA #2055 Cranes in Construction.............................. 18 n OSHA #2225 Respiratory Protection................................ 18 n OSHA #2264 Confined Space.......................................... 19 n OSHA #2455 S&H Management Program.............................19 n OSHA #3015 Excavation & Trenching............................. 20 n OSHA #3085 Principles for Scaffolding........................... 21 n OSHA #3095 Electrical Standards.................................... 20 n OSHA #3115 Fall Protection............................................ 21

HEALTHCARE REQUIRED (1) n OSHA #3365 S&H Hazards in Healthcare...........21 ELECTIVES (3) Standards for General Industry......10 n OSHA #511 n OSHA #2225 Respiratory Protection...................18 n OSHA #2255 Principles of Ergonomics...............19 n OSHA #2455 S&H Management Program..........19 n OSHA #3095 Electrical Standards.......................20 HM 242 HAZWOPER 40-Hour for Healthcare............. 31 n n TWO (2) OF THE FOLLOWING SHORT COURSES: SH 200 Joint Commission Overview................... 31 OSHA #7000 Safe Patient Handling 22 OSHA #7200 Bloodborne Pathogens........................... 23 OSHA #7205 Health Hazard Awareness....................... 23 OSHA #7210 Pandemic Illness Preparedness............... 23

PORT SAFETY REQUIRED (2) n OSHA #2055

Cranes in Construction ��18

n OSHA #5410

Maritime Industry Standards ��14

ELECTIVES (2) n Any two (2) OSHA courses1 OIL & GAS REQUIRED (2) n OSHA #5810

Oil & Gas Hazard Recognition ��11

n OG 202

Hydrogen Sulfide (H2S) ��30

ELECTIVES (2) n Any two (2) OSHA courses1 FIRE SAFETY REQUIRED (2) OSHA #511 OSHA #510 n LS 101 ELECTIVES (2) n OSHA #2015 n OSHA #2225 n OSHA #2264 n OSHA #3015

Standards for General Industry �� 10 OR Standards for Construction.................................8 Life Safety Code Concept ��31

n OSHA #3115

Fall Protection................................................21 ICS/NIMS for the Disaster Response Supervisor & Professional..............................15 Incident Management Training......................15

n RISK MANAGEMENT REQUIRED (2) OSHA #511 n OSHA #510 n RM 101 ELECTIVES (2) n RM 201 n RM 202

Assessment Techniques �� 27 Performance Measurement.......................27

n RM 203

Risk-Informed Decision Making �� 27

n RM 785

Root Cause Analysis................................. 27

Standards for General Industry.......... 10 OR Standards for Construction........................... 8 Risk Management Principles.................... 27

n DR 560 n DR 660

The University of Texas at Arlington | OSHA Education Center

Infectious Disease Preparedness............ 23

OSHA #7230

Hazardous Materials.......................................17 Respiratory Protection....................................18 Confined Space..............................................19 Excavation & Trenching.................................20

Excluding Outreach Trainer courses and OSHA short courses.

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

NEW

REQUIRED (3) OSHA #5600 n DR 560 DR 660 n HM 241 OSHA #511 n OSHA #510 ELECTIVES (2)

REQUIRED (7) n OSHA #3365 S&H Hazards in Healthcare ��21 General Industry Trainer ��11 n OSHA #501 Standards for General Industry ��10 n OSHA #511 Standards for Construction ��8 n OSHA #510 n OSHA #2455 S&H Management Program ��19 n OSHA #2255 Principles of Ergonomics ��19 Guide to Industrial Hygiene ��17 n OSHA #521 ELECTIVES (2) n OSHA #2015 Hazardous Materials ��17 OSHA #2225 Respiratory Protection ��18 20 n OSHA #3095 Electrical Standards. n OSHA #2045 Machine Guarding..........................................18 n OSHA #2264 Confined Space..............................................19 n TWO (2) OF THE FOLLOWING SHORT COURSES: OSHA #7000 Safe Patient Handling.....................................22 OSHA #7200 Bloodborne Pathogens..................................23 OSHA #7210 Pandemic Illness Preparedness......................23 OSHA #7225 Transitioning to Safer Chemicals...................23 OSHA #7230 Infectious Disease Preparedness...................23

Disaster Site Worker Trainer................. 15 OR ICS/NIMS for Disaster Response......... 15 OR Incident Management Training............ 15 HAZWOPER General Site Worker 40-hour..30 Standards for General Industry.....10 OR Standards for Construction.......................8

n Any two (2) OSHA courses1 WAREHOUSING & STORAGE REQUIRED (2) n OSHA #7005

Warehousing and Storage............................ 22

n OSHA #511

Standards for General Industry..................... 10

ELECTIVES (3) n OSHA #2015

Hazardous Materials.......................................17

n OSHA #2255

Principles of Ergonomics...............................19

n OSHA #2455

S&H Management Program..........................19

n OSHA #3095

Electrical Standards........................................20

CSHO CERTIFIED SAFETY & HEALTH OFFICIAL

CERTIFIED SAFETY & HEALTH OFFICIAL Now offered in three major industry tracks, the CSHO provides a solid and broad-based safety and health education in a curricula of OSHA Training Institute courses.

GENERAL INDUSTRY REQUIRED (7) n OSHA #501 n OSHA #511 n OSHA #510 n OSHA #2455 n OSHA #521 n OSHA #2045 n OSHA #3095 ELECTIVES (2) n OSHA #2264 n OSHA #2015 n OSHA #2225 n OSHA #2255 n OSHA #3085 n OSHA #3115

General Industry Trainer.................................11 Standards for General Industry......................10 Standards for Construction..............................8 S&H Management Program..........................19 Guide to Industrial Hygiene...........................17 Machine Guarding.........................................18 Electrical Standards........................................20 Confined Space..............................................19 Hazardous Materials.......................................17 Respiratory Protection....................................18 Principles of Ergonomics...............................19 Principles of Scaffolding.................................21 Fall Protection.................................................21

OSHA #5410 Maritime Industry Standards ��14

OSHA #5810 Oil & Gas Hazard Recognition ��11 The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

HEALTHCARE

CERTIFICATION PLANNING GUIDE

DISASTER RESPONSE

CONSTRUCTION INDUSTRY REQUIRED (7) n n n n n n n

OSHA #500 OSHA #510 OSHA #511 OSHA #2455 OSHA #3015 OSHA #3095 OSHA #3115

Construction Trainer..........................................9 Standards for Construction...............................8 Standards for General Industry.......................10 S&H Management Program............................. 19 Excavation & Trenching..................................20 Electrical Standards.........................................20 Fall Protection..................................................21

n n n n n n n

ELECTIVES (2) OSHA #3085 OSHA #521 OSHA #2015 OSHA #2045 OSHA #2055 OSHA #2225 OSHA #2255

Principles for Scaffolding.................................21 Guide to Industrial Hygiene............................17 Hazardous Materials........................................17 Machine Guarding..........................................18 Cranes in Construction ��18 Respiratory Protection.....................................18 Principles of Ergonomics................................19

OSHA #2264 Confined Space...............................................19

Note: Two (2) OSHA short courses may be counted as one (1) elective toward your CSHO.

866-906-9190 | uta.edu/ded/osha

CERTIFICATION PLANNING GUIDE

SHEP SAFETY, HEALTH & ENVIRONMENTAL PROFESSIONAL

SAFETY, HEALTH & ENVIRONMENTAL PROFESSIONAL Often, EHS responsibilities fall on the same person in an organization. Stay on top of your game and earn your SHEP certification by completing a full complement of coursework in safety and health, environmental, and risk management.

REQUIRED (3) Intro to Environmental Compliance �� 38 n ETI 101 n RM 101 n

Risk Management Principles.........................27

OSHA #500

Construction Trainer..................................9 OR

OSHA #501

General Industry Trainer................................ 11

SAFETY AND HEALTH ELECTIVES (4) n OSHA #521

Guide to Industrial Hygiene..........................17

n OSHA #2015 Hazardous Materials......................................17 n OSHA #2045 Machine Guarding........................................18 n OSHA #2055 Cranes in Construction ��18 n OSHA #2225 Respiratory Protection................................... 18 n OSHA #2455 S&H Management Program............................19 n OSHA #2255 Principles of Ergonomics..............................19 n OSHA #2264 Confined Space............................................. 19 n OSHA #3015 Excavation & Trenching................................20 n OSHA #3085 Principles of Scaffolding................................ 21 n OSHA #3095 Electrical Standards....................................... 20 n OSHA #3115 Fall Protection................................................ 21 n OSHA #5810 Oil & Gas Hazard Recognition ��11 n SH 810

Written Program for S&H Mgmt.................... 28

ENVIRONMENTAL ELECTIVES (1) n AIR 201

Fundamentals of the Clean Air Act............ 41

n ETI 501

EPA Outreach Trainer Course

n MGE 801

Environmental Management Systems........ 41

n MGE 810

Environmental Audits................................. 41

n MGE 817

Pollution Prevention and Lean Principles... 41

n WST 401

Resource Conservation and Recovery Act � 41

n WTR 301

Water and Wastewater Regulations........... 41

n WTR 302

Storm Water Pollution Prevention Plans..... 41

MASTER CERTIFICATION

MC MASTER CERTIFICATION

The MC is our most advanced level of certification. Its foundation is the Management System Design course featuring one-on-one mentoring by our instructors.

SAFETY & HEALTH REQUIRED (2)

n SHEP Certification n MS 901 Management System Design...................... 28 ELECTIVES (3)

n RM 202 n SH 702 n SH 801 n SH 810 n SH 900 n SH 910 n SH 920 n SH 925 n SH 930

Performance Measurement......................... 27 Accident Investigation Certificate Program....... 29 Current Trends in BBS................................. 28 Written Program for S&H Mgmt. �� 28 Leading Measures....................................... 29 Principles of Auditing Process Safety Management (PSM) �� 29 Management of Change............................. 29 Project Management for EHS Professionals...... 29

RISK MANAGEMENT REQUIRED (2)

n SHEP Certification n MS 901 Management System Design...................... 28 ELECTIVES (3)

n RM 201 n RM 202 n RM 203 n SH 900

Assessment Techniques............................... 27 Performance Measurement......................... 27 Risk-Informed Decision Making................... 27 Leading Measures....................................... 29

ENVIRONMENTAL REQUIRED (2)

n MS 901 Management System Design...................... 28 Environmental Regulatory Professional (ERP) Certification OR n Environmental Science Professional (ESP) Certification OR Certified Environmental Manager (CEM) Certification ELECTIVES (3)

Three (3) additional environmental courses n ______________________________________________

ACCIDENT INVESTIGATION CERTIFICATE & BOOT CAMP >> See page 29 for more information.

The University of Texas at Arlington | OSHA Education Center

n ______________________________________________ n ______________________________________________ Note: Due to course content, we highly recommend attending your MC electives prior to taking the MS 901. The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

Developed by OSHA to support their mission to ensure safe and healthful working conditions for working men and women, the Safety & Health Fundamentals certificate program is a proactive measure to protect employees across the nation. CONSTRUCTION

n OSHA #3085

Principles of Scaffolding...................................... 21

Must be combined minimum of 68 contact hours.

n OSHA #3095

Electrical Standards............................................. 20

n OSHA #7105

Emergency Evacuation....................................... 22

n OSHA #7110

Safe Bolting......................................................... 22

n OSHA #7205

Health Hazard Awareness................................... 23

n OSHA #7215

Silica.................................................................... 23

n OSHA #7300

OSHA’s PRCS Standard....................................... 24

n OSHA #7400

Noise Exposure Standards.................................. 24

OSHA #7405

Fall Hazard Awareness..................................24 OR

OSHA #3115

Fall Protection..................................................... 21

OSHA #7410

Managing Excavation Hazards......................24 OR

OSHA #3015

Excavation & Trenching...................................... 20

n OSHA #7845

Recordkeeping Rule Seminar............................. 25

n OSHA #7005 OSHA #7100 n OSHA #2045 n OSHA #7105

Warehousing and Storage.................................. 22 Machinery and Machine Safeguarding......... 22 OR Machine Guarding................................................18 Emergency Evacuation........................................ 22

REQUIRED (3) Must be combined minimum of 39 contact hours.

n OSHA #510

Standards for Construction................................... 8

OSHA #7500 OSHA #2455

Intro to S&H Management............................24 OR S&H Management Program............................... 19

n OSHA #7505

Intro to Incident (Accident) Investigation........... 25

ELECTIVES (4) Must be combined minimum of 29 contact hours.

n OSHA #521

Guide to Industrial Hygiene................................ 17

n OSHA #2225

Respiratory Protection......................................... 18

n OSHA #2255

Principles of Ergonomics.................................... 19

n OSHA #2264

Confined Space.................................................. 19

GENERAL INDUSTRY Must be combined minimum of 68 contact hours. REQUIRED (3) Must be combined minimum of 39 contact hours.

n OSHA #511 OSHA #7500 n OSHA #2455 n OSHA #7505

n n

Standards for General Industry.............................10 Intro to S&H Management............................. 24 OR n OSHA #7200 S&H Management Program.................................19 Intro to Incident (Accident) Investigation........ 25 n OSHA #7205 n OSHA #7210 ELECTIVES (4) Must be combined minimum of 29 contact hours. Guide to Industrial Hygiene..................................17 n OSHA #7215 n OSHA #521 n OSHA #2225 Respiratory Protection...........................................18 n OSHA #7300 OSHA #2264 n OSHA #2255 Principles of Ergonomics......................................19 OSHA #7845 n n OSHA #3095 Electrical Standards...............................................20 n OSHA #7000

Bloodborne Pathogen Exposure Control for Healthcare Facilities..............................................23 Health Hazard Awareness...................................23 Pandemic Illness Preparedness.............................23 Silica............................................................................23 OSHA’s PRCS Standard.................................24 OR Confined Space................................................... 19 Recordkeeping Rule Seminar.............................. 25

Safe Patient Handling...........................................22

MARITIME

n OSHA #3095

Electrical Standards............................................20

Must be combined minimum of 77 contact hours.

n OSHA #3115

Fall Protection.....................................................21

REQUIRED (3) Must be combined minimum of 48 contact hours.

n OSHA #7005

Warehousing and Storage.................................22

n OSHA #7105

Emergency Evacuation.......................................22

n OSHA #7115

Lockout/Tagout...................................................22

n OSHA #7120

Intro to Combustible Dust Hazards...................22

n OSHA #7205

Health Hazard Awareness..................................23

n OSHA #7215

Silica...........................................................................23

n OSHA #5410

Maritime Standards............................................14

OSHA #7500 OSHA #2455

Intro to S&H Management.............................. 24 OR S&H Management Program............................ 19

n OSHA #7505

Intro to Incident (Accident) Investigation...........25

CERTIFICATION PLANNING GUIDE

SAFETY & HEALTH FUNDAMENTALS

ELECTIVES (4) Must be combined minimum of 29 contact hours.

n OSHA #521

Guide to Industrial Hygiene...............................17

n OSHA #7845

Recordkeeping Rule Seminar.............................25

n OSHA #2015

Hazardous Materials...........................................17

OSHA #7100

Machinery and Machine Safeguarding...........22 OR

n OSHA #2055

Cranes in Construction.......................................18

OSHA #2045

Machine Guarding..............................................18

n OSHA #2225

Respiratory Protection........................................18

OSHA #7300

OSHA’s PRCS Standard............................... 24 OR

n OSHA #2255

Principles of Ergonomics....................................19

OSHA #2264

Confined Space..................................................19

n OSHA #3085

Principles of Scaffolding.....................................21

866-906-9190 | uta.edu/ded/osha

CONSTRUCTION OSHA COURSES OSHA #510

OSHA Standards for the Construction Industry 30 Hours | $650

Contract | $9,000

This course covers the OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, with special emphasis on the most hazardous areas in construction. Upon course completion, participants will be able to define construction terms found in the OSHA Construction Standards; identify hazards in the construction industry; locate and determine the appropriate OSHA Construction Standards, policies, and procedures; and describe the use of the OSHA Construction Standards and Regulations to supplement an ongoing workplace safety and health program. This course satisfies the training prerequisite for the Authorized Trainer Program designations in Construction, Emergency Action & Fire Prevention Planning, Equipment Inspection, Hazard Communication/GHS, Ladders, Ladder Inspection, Material Handling, Personal Protective Equipment, Recordkeeping, Tool Safety, and Welding & Cutting.

Jan 6 - 9, 2026

Arlington, TX

Jan 6 - 9, 2026

Live Webcast

Jan 12 - 15, 2026

Houston, TX

Jan 13 - 16, 2026

Live Webcast

Jan 13 - 23, 2026

Live Webcast

Evening

Jan 20 - 23, 2026 Jan 20 - 23, 2026

En Español

Austin, TX Live Webcast

Jan 27 - 30, 2026

Live Webcast

Feb 3 - 6, 2026

Arlington, TX

Feb 3 - 6, 2026

Live Webcast

Feb 9 - 12, 2026

Houston, TX

Feb 10 - 13, 2026

Oklahoma City, OK

Feb 17 - 20, 2026

Albuquerque, NM

Feb 17 - 20, 2026

Live Webcast

Feb 24 - 27, 2026

Live Webcast

Mar 2 - 5, 2026

Houston, TX

Mar 3 - 6, 2026

Arlington, TX

Mar 9 - 12, 2026

Live Webcast

Mar 16 - 19, 2026

Live Webcast

Mar 23 - 26, 2026

Houston, TX

Mar 31 - Apr 3, 2026

Arlington, TX

Mar 31 - Apr 3, 2026

Live Webcast

Mar 31 - Apr 3, 2026

San Antonio, TX

Apr 7 - 10, 2026

Live Webcast

Apr 20 - 23, 2026

Houston, TX

Apr 21 - 24, 2026

Live Webcast

Apr 28 - May 1, 2026

Arlington, TX

Apr 28 - May 1, 2026

Live Webcast

May 12 - 15, 2026

Live Webcast

May 18 - 21, 2026

Houston, TX

May 19 - 22, 2026

Live Webcast

May 26 - 29, 2026

Arlington, TX

Jun 2 - 5, 2026

Live Webcast

Jun 9 - 12, 2026

Austin, TX

Jun 9 - 12, 2026

Live Webcast

Jun 15 - 18, 2026

Houston, TX

Jun 16 - 19, 2026

Albuquerque, NM

Jun 23 - 26, 2026

Arlington, TX

Jun 23 - 26, 2026

Live Webcast

Jun 29 - Jul 2, 2026

Live Webcast

Jun 30 - Jul 3, 2026

Tulsa, OK

Jul 6 - 9, 2026

Houston, TX

Jul 7 - 10, 2026

El Paso, TX

Jul 21 - 24, 2026

Arlington, TX

Jul 21 - 24, 2026

Live Webcast

En Español

Jul 21 - 24, 2026

Live Webcast

Jul 28 - 31, 2026

Live Webcast

Aug 3 - 6, 2026

Houston, TX

Aug 11 - 14, 2026

Arlington, TX

Aug 11 - 14, 2026

Live Webcast

Aug 18 - 21, 2026

Live Webcast

Aug 18 - 21, 2026

San Antonio, TX

Aug 25 - 28, 2026

Live Webcast

Aug 31 - Sep 3, 2026

Houston, TX

Sep 8 - 11, 2026

Live Webcast

Sep 15 - 18, 2026

Arlington, TX

Sep 22 - 25, 2026

Live Webcast

Sep 28 - Oct 1, 2026

Houston, TX

Oct 6 - 9, 2026

Live Webcast

Oct 13 - 16, 2026

Live Webcast

Oct 19 - 22, 2026

Houston, TX

Oct 20 - 23, 2026

Arlington, TX

Oct 20 - 23, 2026

Live Webcast

Oct 27 - 30, 2026

San Antonio, TX

Nov 3 - 6, 2026

Albuquerque, NM

Nov 3 - 6, 2026

Live Webcast

Nov 10 - 13, 2026

Arlington, TX

Nov 10 - 13, 2026

Live Webcast

Nov 16 - 19, 2026

Houston, TX

The University of Texas at Arlington | OSHA Education Center

CONSTRUCTION OSHA COURSES OSHA #500

Trainer Course in OSHA Standards for Construction 30 Hours | $720

Contract | $10,000

This course prepares the participants to become a trainer in the OSHA Outreach Training Program, conduct both the 10- and 30-hour Construction Outreach classes and issue OSHA Outreach Cards to participants after verifying course completion. Using the OSHA Construction Standards as a guide, the course emphasizes those topics required in the 10- and 30-hour programs, as well as those which are most hazardous. Participants receive training on effective instructional approaches and the use of visual aids and handouts. Participants must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic and pass a written exam. Prerequisites: Participants must have successfully completed the OSHA #510 OSHA Standards for Construction within the past seven (7) years and have five (5) years of safety and health work experience in the construction industry. Refresher Training: Authorized Construction Industry Outreach Training Program trainers are required to attend the OSHA #502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.

Jan 13 - 16, 2026

Live Webcast

Jan 20 - 23, 2026

Arlington, TX

Jan 20 - 23, 2026

Houston, TX

Jan 27 - 30, 2026

San Antonio, TX

Feb 3 - 6, 2026

Live Webcast

Feb 9 - 19, 2026

Live Webcast

Evening

Feb 10 - 13, 2026

Arlington, TX

Feb 16 - 19, 2026

Houston, TX

Feb 24 - 27, 2026

Live Webcast

Mar 3 - 6, 2026

Albuquerque, NM

Mar 10 - 13, 2026

Arlington, TX

Mar 10 - 13, 2026

Live Webcast

Mar 16 - 19, 2026

Houston, TX

Mar 24 - 27, 2026

El Paso, TX

Mar 24 - 27, 2026

En Español

Live Webcast

Mar 31 - Apr 3, 2026

Live Webcast

Apr 6 - 9, 2026

Houston, TX

Apr 14 - 17, 2026

Arlington, TX

Apr 21 - 24, 2026

Live Webcast

May 5 - 8, 2026

Arlington, TX

May 5 - 8, 2026

Live Webcast

May 18 - 21, 2026

Houston, TX

May 26 - 29, 2026

Live Webcast

Jun 1 - 4, 2026

Houston, TX

Jun 2 - 5, 2026

Arlington, TX

Jun 15 - 18, 2026

Live Webcast

Jun 22 - 25, 2026

Houston, TX

Jun 29 - Jul 2, 2026

Arlington, TX

Jul 7 - 10, 2026

Live Webcast

Jul 13 - 16, 2026

Houston, TX

Jul 21 - 24, 2026

Live Webcast

Aug 4 - 7, 2026

Arlington, TX

Aug 11 - 14, 2026

Oklahoma City, OK

Aug 17 - 20, 2026

Houston, TX

Aug 18 - 21, 2026

Live Webcast

Aug 25 - 28, 2026

Live Webcast

Sep 1 - 4, 2026

Arlington, TX

Sep 8 - 11, 2026

Houston, TX

Sep 15 - 18, 2026

Austin, TX

Sep 22 - 25, 2026

Live Webcast

Sep 29 - Oct 2, 2026

Arlington, TX

Oct 5 - 8, 2026

Houston, TX

Oct 13 - 16, 2026

Live Webcast

Oct 27 - 30, 2026

Arlington, TX

Oct 27 - 30, 2026

Live Webcast

Nov 2 - 5, 2026

Freeport, TX

Nov 10 - 13, 2026

Live Webcast

Dec 1 - 4, 2026

Irving, TX

Dec 7 - 10, 2026

Houston, TX

Dec 8 - 11, 2026

Live Webcast

Dec 15 - 18, 2026

Albuquerque, NM

SH 385

EM 385-1-1 Construction Safety Standards 40 Hours | $720

Contract | $10,000

This course is designed for contractors, military, and government employees who enforce, or must comply with, U.S. Army Corps of Engineers (USACE) safety and health requirements (EM 385-1-1, U.S. Army Corps of Engineers Safety & Health Requirements Manual) and OSHA 29 CFR 1926. Attendees will learn the unique procedures established by the USACE contracts and EM 385-1-1. Topics include recognition, avoidance, abatement, and prevention of safety and health hazards in construction. Specific topics cover preparation of site-specific accident prevention plan (APP), activity hazard analysis (AHA) development, site personnel training, incident response, and jobsite auditing. This training can be conducted with an OSHA 30-hour for Construction Industry. This course satisfies the training prerequisite for the Authorized Trainer Program designations in Construction, Emergency Action & Fire Prevention Planning, Equipment Inspection, Hazard Communication/ GHS, Ladders, Ladder Inspection, Material Handling, Personal Protective Equipment, Tool Safety, and Welding & Cutting.

Feb 2 - 6, 2026

Houston, TX

Jun 1 - 5, 2026

Arlington, TX

Jun 15 - 22, 2026

Live Webcast

Aug 17 - 21, 2026

Houston, TX

866-906-9190 | uta.edu/ded/osha

GENERAL INDUSTRY COURSES OSHA #511

OSHA Standards for General Industry 30 Hours | $650

Contract | $9,000

This course covers the OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards and general industry principles, with special emphasis on the most hazardous areas in general industry. Upon course completion, participants will be able to define general industry terms found in the OSHA General Industry Standards; identify hazards in general industry; locate and determine appropriate OSHA General Industry Standards, policies, and procedures; and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing workplace safety and health program. This course satisfies the training prerequisite for the Authorized Trainer Program designations in General Industry, Emergency Action & Fire Prevention Planning, Equipment Inspection, Hazardous Communication/GHS, Ladders, Ladder Inspection, Material Handling, Personal Protective Equipment, Recordkeeping, Tool Safety, and Welding & Cutting.

Jan 5 - 8, 2026

Houston, TX

Jan 6 - 9, 2026

Live Webcast

Jan 20 - 23, 2026

Arlington, TX

Jan 26 - 29, 2026

Houston, TX

Jan 26 - Feb 5, 2026

Live Webcast

Evening

Jan 27 - 30, 2026

Live Webcast

Feb 10 - 13, 2026

Arlington, TX

Feb 10 - 13, 2026

Live Webcast

Mar 2 - 5, 2026

Houston, TX

Mar 3 - 6, 2026

Live Webcast

Mar 10 - 13, 2026

Arlington, TX

Mar 24 - 27, 2026

Live Webcast

Mar 30 - Apr 2, 2026

Houston, TX

Apr 7 - 10, 2026

Arlington, TX

Apr 14 - 17, 2026

Albuquerque, NM

Apr 14 - 17, 2026

Live Webcast

Apr 21 - 24, 2026

Oklahoma City, OK

Apr 27 - 30, 2026

Houston, TX

Apr 28 - May 1, 2026

Arlington, TX

Apr 28 - May 1, 2026

Live Webcast

May 5 - 8, 2026

San Antonio, TX

May 19 - 22, 2026

Live Webcast

May 26 - 29, 2026

Houston, TX

Jun 2 - 5, 2026

Arlington, TX

Jun 2 - 5, 2026

Live Webcast

En Español

Jun 9 - 12, 2026

Live Webcast

Jun 15 - 18, 2026

Live Webcast

Jun 29 - Jul 2, 2026

Arlington, TX

Jul 14 - 17, 2026

Live Webcast

Jul 20 - 23, 2026

Houston, TX

Jul 28 - 31, 2026

Arlington, TX

Aug 4 - 7, 2026

Live Webcast

Aug 10 - 13, 2026

Houston, TX

Aug 18 - 21, 2026

Live Webcast

Aug 25 - 28, 2026

Arlington, TX

Sep 1 - 4, 2026

Albuquerque, NM

Sep 8 - 11, 2026

El Paso, TX

Sep 8 - 11, 2026

Live Webcast

Sep 14 - 17, 2026

Houston, TX

Sep 22 - 25, 2026

Arlington, TX

Sep 29 - Oct 2, 2026

Live Webcast

Oct 6 - 9, 2026

Tulsa, OK

Oct 12 - 15, 2026

Freeport, TX

OSHA #6005

Collateral Duty Course for Other Federal Agencies

30 Hours | $650

Contract | $8,500

This course covers the OSH Act, Executive Order 12196, and the OSHA General Industry Standards. Upon course completion participants will have the ability to define general industry terms, identify hazards that occur in general industry, determine appropriate standards and regulations for federal agencies, locate OSHA General Industry Standards, policies, and procedures, and describe the use of the OSHA General Industry Standards and regulations to effectively assist agency safety and health officers with inspection and abatement efforts. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Office Safety. May 12 - 15, 2026

Live Webcast

OSHA #6015

Occupational Safety and Health Course for Other Federal Agencies 60 Hours | $1,250

Contract | $16,500

This course covers the recognition, evaluation, and control of safety and health hazards for other federal agencies. Course topics include the OSH Act, Executive Order 12196, 29 CFR 1960, and1910 General Industry Standards, understanding the Federal Safety and Health program regulations, identification of safety and health hazards, controlling hazards, hazard abatement, and construction focus four topics. This course is intended for federal employees responsible for the occupational safety and health programs at their respective agencies. Upon course completion, students will have the ability to apply OSHA General Industry Standards and regulations pertaining to federal agencies, identify safety and health hazards, and control and abate hazards.

The University of Texas at Arlington | OSHA Education Center

GENERAL INDUSTRY COURSES OSHA #501

Trainer Course in OSHA Standards for General Industry 30 Hours | $720

Contract | $10,000

This course prepares the participant to become a trainer in the OSHA Outreach Training Program, to conduct both the 10- and 30-hour General Industry Outreach classes and issue OSHA Outreach Cards to participants after verifying course completion. Using the OSHA General Industry Standards as a guide, this course emphasizes those topics required in the 10- and 30-hour programs, as well as those which are most hazardous. Participants receive training on effective instructional approaches and the use of visual aids and handouts. Participants must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic and pass a written exam at the end of the course. Prerequisites: Participants must have successfully completed the OSHA #511 OSHA Standards for General Industry within the past seven (7) years and have five (5) years of safety and health work experience in general industry. Refresher Training: Authorized General Industry Outreach Training Program trainers are required to attend the OSHA #503 Update for General Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.

Jan 6 - 9, 2026

Live Webcast

Jan 20 - 23, 2026

Arlington, TX

Jan 27 - 30, 2026

Live Webcast

Feb 17 - 20, 2026

Live Webcast

Mar 9 - 12, 2026

Houston, TX

Mar 17 - 20, 2026

Live Webcast

Mar 24 - 27, 2026

Arlington, TX

Apr 7 - 10, 2026

Live Webcast

Apr 14 - 17, 2026

Oklahoma City, OK

May 5 - 8, 2026

Live Webcast

May 12 - 15, 2026

Arlington, TX

May 19 - 22, 2026

Austin, TX

May 26 - 29, 2026

Live Webcast

Jun 8 - 11, 2026

Houston, TX

Jun 23 - 26, 2026

Live Webcast

Jul 7 - 10, 2026

Arlington, TX

Jul 14 - 17, 2026

Live Webcast

Jul 21 - 24, 2026

Albuquerque, NM

Aug 11 - 14, 2026

Live Webcast

Aug 24 - 27, 2026

Houston, TX

Aug 25 - 28, 2026

Live Webcast

En Español

Sep 1 - 4, 2026

Live Webcast

Sep 8 - 11, 2026

Arlington, TX

Sep 22 - 25, 2026

Live Webcast

Sep 29 - Oct 2, 2026

El Paso, TX

Oct 20 - 23, 2026

Live Webcast

OSHA #5810

Hazards Recognition and Standards for On-Shore Oil and Gas Exploration and Production 30 Hours | $720

Contract | $10,000

This course instructs participants on how to protect themselves and others by developing the knowledge and skills to anticipate, recognize, evaluate, and control hazards common to the on-shore oil and gas exploration and production industry. Material presented applies to topics including but not limited to, construction, drilling, completion, well servicing, production, product gathering and processing, and product transmission sites.

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Oil & Gas.

Apr 13 - 16, 2026

Houston, TX

May 26 - 29, 2026

Live Webcast

Sep 15 - 18, 2026

Arlington, TX

CPT 101

Fall Protection for the Competent Person 24 Hours | $650

Contract | $8,500

This 3-day course is designed for personnel who may be designated as the Competent Person by their employer for typical construction-related activities involving working at height. It is also recommended for any construction, maintenance, or supervisory personnel who use fall prevention and/or protection equipment and systems or who will be responsible for safety at their job sites where fall hazards exist. Topics include: fall hazard recognition, evaluation, and control; construction exposures and applications; detailed review of fall protection regulations and requirements; hierarchy of fall protection systems; fall hazard evaluation; eliminating and controlling fall hazards; Aerial Lifts and ladders; developing and maintaining a managed fall protection program; conducting fall hazard surveys and inspections; fall prevention and protection equipment and system selection and use; and incident investigations. Training includes active participation with hands-on activities and demonstrations. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Fall Protection. Prerequisites: OSHA #500 Trainer Course in OSHA Standards for Construction, OSHA #501 Trainer Course in OSHA Standards for General Industry, or ATP 191 Safety & Health Authorized Trainer. This course satisfies the requirements of OSHA, ANSI, and USACE 385-1-1. Refresher training: Competent Persons are required to attend update training at least every two (2) years to stay current with fall protection and rescue educational industry requirements IAW ANSI Z359.2. The update course CPT 101O is now available online.

Jun 30 - Jul 2, 2026

EVENING COURSES Available

Houston, TX

View Our Schedule of Evening Classes

PAGE 44

866-906-9190 | uta.edu/ded/osha

Lead with Confidence. Train with Authority. Complete your OSHA Outreach Trainer or Trainer Update course through the OSHA Education Center at UTA. Strengthen your expertise, empower safer workplaces, and deliver OSHA-authorized training.

OSHA #502

Update for Construction Industry Outreach Trainers 18.5 Hours | $530

Contract | $7,500

This course is for authorized OSHA Outreach Training Program trainers who have completed the OSHA #500 Trainer Course in OSHA Standards for the Construction Industry. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion, participants will be able to demonstrate professional development by applying effective adult learning principles and interactive training techniques to identify, define, and explain construction industry hazards and acceptable corrective measures as they teach the 10- and 30- hour Construction Outreach Training Program classes. Prerequisites: OSHA #500 Trainer Course in OSHA Standards for Construction. Authorized Construction Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status.

Jan 5 - 7, 2026

Houston, TX

Jan 12 - 14, 2026

Arlington, TX

Jan 12 - 14, 2026

Live Webcast

Feb 2 - 4, 2026

Austin, TX

Feb 16 - 18, 2026

Houston, TX

Feb 16 - 18, 2026

Live Webcast

Feb 23 - 25, 2026

Arlington, TX

Mar 2 - 4, 2026

Oklahoma City, OK

Mar 23 - 25, 2026

Albuquerque, NM

Mar 23 - 25, 2026

Live Webcast

Mar 30 - Apr 1, 2026

Houston, TX

Apr 6 - 8, 2026

Arlington, TX

Apr 27 - 29, 2026

Live Webcast

May 11 - 13, 2026

Houston, TX

May 18 - 20, 2026

Arlington, TX

Jun 1 - 3, 2026

Live Webcast

Jun 22 - 24, 2026

Houston, TX

Jun 29 - Jul 1, 2026

Live Webcast

Jul 6 - 8, 2026

Arlington, TX

Jul 6 - 8, 2026

Live Webcast

En Español

Jul 13 - 15, 2026

El Paso, TX

Jul 27 - 29, 2026

San Antonio, TX

Aug 3 - 5, 2026

Houston, TX

Aug 10 - 12, 2026

Live Webcast

Aug 17 - 19, 2026

Arlington, TX

Aug 24 - 26, 2026

Albuquerque, NM

Aug 31 - Sep 2, 2026

Tulsa, OK

Sep 14 - 16, 2026

Houston, TX

Sep 14 - 16, 2026

Live Webcast

Sep 28 - 30, 2026

Arlington, TX

Oct 19 - 21, 2026

Live Webcast

Oct 26 - 28, 2026

Houston, TX

Nov 9 - 11, 2026

Arlington, TX

Nov 30 - Dec 2, 2026

Houston, TX

Nov 30 - Dec 2, 2026

Live Webcast

Dec 7 - 9, 2026

Austin, TX

Dec 14 - 16, 2026

Arlington, TX

The University of Texas at Arlington | OSHA Education Center

Don’t Forget to Update! Authorized Outreach trainers are required to attend an Update Course at least ONCE EVERY FOUR (4) YEARS to maintain their trainer status.

OUTREACH TRAINER UPDATE COURSES OSHA #503

Update for General Industry Outreach Trainers 18.5 Hours | $530

Contract | $7,500

This course is for authorized OSHA Outreach Training Program trainers who have completed the OSHA #501 Trainer Course in Occupational Safety and Health Standards for General Industry. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion, participants will be able to demonstrate professional development by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they teach the 10- and 30-hour General Industry Outreach Training Program classes. Prerequisites: OSHA #501 Trainer Course in Standards for General Industry. Authorized General Industry Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status.

Jan 7 - 9, 2026

Houston, TX

Jan 14 - 16, 2026

Arlington, TX

Jan 14 - 16, 2026

Live Webcast

Feb 4 - 6, 2026

Austin, TX

Feb 18 - 20, 2026

Houston, TX

Feb 18 - 20, 2026

Live Webcast

Feb 25 - 27, 2026

Arlington, TX

Mar 4 - 6, 2026

Oklahoma City, OK

Mar 25 - 27, 2026

Albuquerque, NM

Mar 25 - 27, 2026

Live Webcast

Apr 8 - 10, 2026

Arlington, TX

Apr 29 - May 1, 2026

Live Webcast

May 13 - 15, 2026

Houston, TX

May 20 - 22, 2026

Arlington, TX

Jun 3 - 5, 2026

Live Webcast

Jul 8 - 10, 2026

Arlington, TX

Jul 8 - 10, 2026

Live Webcast

En Español

Jul 15 - 17, 2026

El Paso, TX

Jul 29 - 31, 2026

San Antonio, TX

Aug 5 - 7, 2026

Houston, TX

Aug 12 - 14, 2026

Live Webcast

Aug 19 - 21, 2026

Arlington, TX

Aug 26 - 28, 2026

Albuquerque, NM

Sep 2 - 4, 2026

Tulsa, OK

Sep 16 - 18, 2026

Live Webcast

Sep 30 - Oct 2, 2026

Arlington, TX

Oct 21 - 23, 2026

Live Webcast

Oct 28 - 30, 2026

Houston, TX

Nov 11 - 13, 2026

Arlington, TX

Dec 2 - 4, 2026

Houston, TX

Dec 2 - 4, 2026

Live Webcast

Dec 9 - 11, 2026

Austin, TX

Dec 16 - 18, 2026

Arlington, TX

Outreach Portal » Web-based Application for Reporting Training and Requesting Outreach Cards

» User-Friendly, Menu-Driven » Simplified Submission and Recordkeeping

» Computer, Tablet, or Smartphone Access » Expedited overnight shipping of student cards » Improved proccessing Speed » Tracking numbers for student cards, after submitting reports

» Training Resources » Store Your Course Records and Copies of Cards 866-906-9190 | uta.edu/ded/osha

MARITIME COURSES OSHA #5410

OSHA #5402

Maritime Industry Trainer Update Course

Occupational Safety and Health Standards for the Maritime Industry 35 Hours | $720

19 Hours | $530 Contract | $10,000

This course covers OSHA policies, procedures, and standards for the maritime industry. Using the OSHA Maritime Standards as a guide, special emphasis is placed on those areas in the maritime industry which are most hazardous. Upon course completion participants will define maritime terms found in the OSHA Maritime Standards, identify hazards in the maritime industry and determine appropriate controls and abatement, locate OSHA Maritime Standards, policies and procedures, and describe the use of the OSHA Maritime Standards and regulations to supplement an ongoing safety and health program.

Contract | $7,500

This course is designed for individuals who have successfully completed the OSHA #5400 Trainer Course in OSHA Standards for the Maritime Industry and are active Outreach Training Program trainers. The course updates the OSHA Maritime standards, policies, and regulations. Upon course completion participants will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define and explain maritime industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Outreach Training Program classes.

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Welding & Cutting.

Prerequisites: OSHA #5400 Trainer Course in OSHA Standards for the Maritime Industry. Authorized OSHA Outreach trainers are required to attend this course once every four (4) years to maintain their trainer status.

Jul 13 - 17, 2026

Live Webcast

Jun 8 - 10, 2026

Dec 7 - 11, 2026

Live Webcast

OSHA #5400

Trainer Course in OSHA Standards for the Maritime Industry 30 Hours | $720

Contract | $10,000

This course is designed for individuals interested in teaching the 10- and 30-hour Maritime safety and health Outreach Training Program to their employees and other interested groups. Special emphasis is placed on those topics required in the 10- and 30-hour Outreach Training Program as well as the most hazardous in the maritime industry using OSHA Maritime Standards as a guide. Participants are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the Outreach Training Program, to conduct 10- and 30hour maritime classes in shipyard employment, marine terminals, and longshoring, and to issue cards to participants after verifying course completion. Participants in OSHA #5400 Trainer Course in OSHA Standards for the Maritime Industry who wish to participate as authorized Outreach Trainer Program trainers in the OSHA Outreach Training Program must successfully prepare a presentation on an assigned OSHA maritime industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. Prerequisites: Participants must successfully complete the OSHA #5410 Occupational Safety and Health Standards for the Maritime Industry, have three (3) years of maritime industry experience, and possess and at least two (2) years of occupational safety and health experience with a broad focus in any industry. Refresher Training: Authorized Maritime Industry Outreach Training Program trainers are required to attend OSHA #5402 Maritime Industry Trainer Update Course at least once every four (4) years to maintain their trainer status.

Aug 25 - 28, 2026

Live Webcast

COMING SOON!

OSHA will be changing the OSHA #5410 Occupational Safety and Health Standards for the Maritime Industry. It will be divided into two separate courses with completion by the end of fiscal year 2026: OSHA #5415 Occupational Safety and Health Standards for Shipyard Employment OSHA #5417 Occupational Safety and Health Standards for Marine Terminals and Longshoring

The University of Texas at Arlington | OSHA Education Center

DISASTER SITE COURSES

AVAILABLE BY CONTRACT

OSHA #5600

Disaster Site Worker Trainer Course 30 Hours | $720

Contract | $10,000

This course prepares experienced Outreach Training Program trainers to present 7.5- and 15-hour Disaster Site Worker Outreach training classes intended for second responders (those arriving hours or days after the event). Course topics include the National Response Framework, the Incident Command System, disaster work zone safety, respiratory protection, communication issues, applying elements of successful adult training programs, and knowledge, skills, and attitudes to awareness training about safety and health standards at natural and human-made disaster sites. Participants are provided the opportunity to practice knowledge and skills through discussion, planned exercises, demonstrations, and presentations. Participants who wish to participate as authorized Disaster Site Worker trainers must prepare a presentation on an assigned disaster site worker topic individually or as part of a group. Successful completion of this course authorizes participants to become trainers in the Disaster Site Worker Outreach Training Program and to issue DOL course completion cards to participants. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Disaster Response. Prerequisites: OSHA #500 Trainer Course in OSHA Standards for Construction or OSHA #501 Trainer Course in OSHA Standards for General Industry, three (3) years of safety training experience, and completion of the 40-hour HAZWOPER training. Refresher Training: Authorized Disaster site worker Outreach Training Program trainers are required to attend the OSHA #5602 Update for Disaster Site Worker Trainer course at least once every four (4) years to maintain their Outreach Training Program trainer authorization.

May 5 - 8, 2026

Live Webcast

DR 560

ICS/NIMS for the Disaster Response Supervisor & Professional 24 Hours

Contract | $8,500

This course is designed for those individuals who may have leadership responsibilities at a natural or human-caused disaster site. The Incident Command System (ICS) and the National Incident Management System (NIMS) are studied in detail with emphasis on their roles and uses during the crisis management and consequence management phases of disaster response work. Topics include: the history, features and principles, and organizational structure of ICS; introduction and overview of NIMS; the relationship between ICS and NIMS; operating efficiently during an incident or event within ICS; the intent, key concepts and principles underlying NIMS; and the purpose of the NIMS components including preparedness, communications and information management, resource management, and command and management.

DR 660 Incident Management Training 32 Hours

Contract | $9,500

This course provides training in Incident Command under the National Incident Management System (NIMS)for Corporate Organizations. The training provides an introduction to the Incident Command System (ICS) and then develops the knowledge and skills necessary for personnel who are likely to assume a supervisory position during Incident Command. This course describes the history, features, principles, and organizational structure as well as the organization and operation of the ICS and Incident Command Hazardous-Material.

OSHA #5602

Update for Disaster Site Worker Trainer Course 7.5 Hours | $450

Contract | $5,000

This course updates the authorized Disaster Site Worker trainer with new technical and regulatory information related to disaster response and the role of OSHA in coordinating occupational safety and health efforts in the National Response Framework. Participants will have the opportunity to share “lessons learned” from teaching the Disaster Site Worker Course. Prerequisites: OSHA #5600 Disaster Site Worker Trainer Course. Authorized Construction Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status.

May 4, 2026

Live Webcast

SH 15DR

Disaster Site Worker 15 Hours

Contract | $5,000

This course is designed for personnel who provide skilled support services or site cleanup services (including hazardous waste cleanup) in response to a disaster. The goal of this course is to increase the participant’s awareness of the safety and health hazards that may be encountered at a natural or human-caused disaster site. The importance of respiratory protection, other Personal Protective Equipment and proper decontamination procedures that may be used to mitigate the hazards will be emphasized. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Disaster Response.

866-906-9190 | uta.edu/ded/osha

How do I become an

Authorized OSHA Outreach Trainer? STEP 1: Complete a one-week OSHA trainer course: Construction Industry [OSHA #500] Prerequisites • Five (5) years of construction safety experience (A Bachelor’s degree or higher in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.) • Completion of OSHA #510 Occupational Safety and Health Standards for the Construction Industry

General Industry [OSHA #501] Prerequisites

• Five (5) years of general industry safety experience A Bachelor’s degree or higher in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience. • Completion of OSHA #511 Occupational Safety and Health Standards for General Industry

Maritime Industry [OSHA #5400] Prerequisites • Three (3) years maritime industry experience • One of the following: ◦ Two years of occupational safety and health experience (with a broad focus) in any industry; ◦ A degree in occupational safety and health from an accredited college or university ◦ Certification as an Associate Safety Professional (ASP), Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), Certified Marine Chemist (CMC), or Certified Safety Health Manager (CSHM) designation ◦ Completion of the OSHA #5410 OSHA Standards for the Maritime Industry

Disaster Site Worker [OSHA #5600] Prerequisites • Current OSHA authorization as a Construction or General Industry Outreach trainer • Three (3) years safety training experience • One of the following: ◦ 40-hour HAZWOPER training (within the last five years) ◦ 8-hour HAZWOPER refresher training (within the last 12 months) ◦ Possession of journey-level credentials in a building trade union

UNSURE IF YOU QUALIFY?

STEP 2: Receive a Certificate of Completion STEP 3: Obtain an Authorized Outreach Trainer Card

The University of Texas at Arlington | OSHA Education Center

Scan here to check eligibility.

OSHA COURSES OSHA #521

OSHA #2015

OSHA Guide to Industrial Hygiene 26 Hours | $650

Hazardous Materials Contract | $8,500

26 Hours | $650

Contract | $8,500

This course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological, and ergonomic hazards; Permissible Exposure Limits (PEL); OSHA health standards; respiratory protection; engineering controls; OSHA sampling protocols and strategies; and workplace health program elements. Workshops involve participants in health hazard recognition, OSHA health standards, and use of sampling equipment. Upon course completion, participants will be able to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine the methods for hazard control and abatement.

This course covers OSHA General Industry Standards and other consensus and proprietary standards related to the use of hazardous materials. Course topics include flammable liquids, compressed gases, LP-gases, and cryogenic liquids. Participants will review related processes, such as spraying, dipping, and the use of electrical equipment in hazardous locations. Upon course completion, participants will be able to assess compliance with OSHA hazardous materials standards; determine hazardous (classified) locations; and conduct proper moving, storing, and handling of hazardous materials.

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Occupational Health.

Feb 10 - 13, 2026

Live Webcast

Apr 21 - 24, 2026

Live Webcast

Jan 13 - 16, 2026

Live Webcast

May 11 - 14, 2026

Houston, TX

Jan 20 - 23, 2026

Houston, TX

May 19 - 29, 2026

Live Webcast

Jan 27 - 30, 2026

Arlington, TX

Jun 9 - 12, 2026

Albuquerque, NM

Feb 17 - 20, 2026

Live Webcast

Jun 15 - 18, 2026

Arlington, TX

Feb 24 - 27, 2026

El Paso, TX

Jul 7 - 10, 2026

Live Webcast

Jul 28 - 31, 2026

Oklahoma City, OK

Mar 31 - Apr 3, 2026

Live Webcast

Sep 8 - 11, 2026

Live Webcast

Apr 21 - 24, 2026

Arlington, TX

Sep 22 - 25, 2026

Austin, TX

Apr 28 - May 1, 2026

Austin, TX

Nov 17 - 20, 2026

Live Webcast

May 4 - 7, 2026

Houston, TX

Dec 8 - 11, 2026

Arlington, TX

May 12 - 15, 2026

Live Webcast

May 26 - 29, 2026

Oklahoma City, OK

Jun 23 - 26, 2026

Live Webcast

Jul 14 - 17, 2026

Arlington, TX

Aug 4 - 7, 2026

Live Webcast

Aug 11 - 14, 2026

Albuquerque, NM

Aug 31 - Sep 3, 2026

Houston, TX

Sep 15 - 18, 2026

Live Webcast

Mar 9 - 19, 2026

Evening

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Hazard Communication/GHS.

SH 520

Industrial Hygiene Techniques 24 Hours

Contract | $8,000

This course introduces participants to industrial hygiene concepts, principles, and practices to evaluate physical and chemical hazards in the workplace. Participants will learn to use and calibrate industrial hygiene measurement equipment, such as personal sampling pumps, indoor air quality meters, and gas analyzers. They will learn sampling methods and techniques for various potential workplace hazards.

866-906-9190 | uta.edu/ded/osha

OSHA COURSES OSHA #2045

OSHA #2225

Machinery and Machine Guarding Standards 26 Hours | $650

Respiratory Protection Contract | $8,500

This course covers various types of common machinery, machine safeguards, and related OSHA regulations and procedures. Participants will receive guidance on the hazards associated with various types of machinery and determining proper machine safeguards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), guarding of portable powered tools, control methods and hazard abatement, appropriate machine safeguards, and common OSHA machine guarding violations. Program highlights include the ability to recognize hazards, provide options for control, and hazard abatement through machine safeguarding and inspection workshops. Upon course completion students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safe guards. This course satisfies the training prerequisite for the Authorized Trainer Program designations in Job Hazard Analysis, Lockout/Tagout, Machine Guarding, and Tool Safety.

Jan 13 - 16, 2026

Albuquerque, NM

Feb 3 - 6, 2026

Arlington, TX

Feb 10 - 13, 2026

Live Webcast

Mar 17 - 20, 2026

El Paso, TX

Mar 24 - 27, 2026

Live Webcast

Apr 6 - 16, 2026

Live Webcast

Evening

May 12 - 15, 2026

Arlington, TX

Jun 2 - 5, 2026

Live Webcast

Jun 8 - 11, 2026

Houston, TX

Jun 16 - 19, 2026

Tulsa, OK

Jul 14 - 17, 2026

San Antonio, TX

Sep 8 - 11, 2026

Irving, TX

Sep 15 - 18, 2026

Live Webcast

Nov 16 - 19, 2026

Houston, TX

Dec 8 - 11, 2026

Oklahoma City, OK

26 Hours | $650

Contract | $8,500

This course covers the requirements for establishing, maintaining, and monitoring a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion, participants will be able to identify and describe the elements of a respiratory protection program; properly select, use, and inspect respiratory protection and protection factors; and evaluate compliance with the OSHA standards. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Respiratory Protection.

Jan 13 - 16, 2026

El Paso, TX

Jan 20 - 23, 2026

Live Webcast

Feb 24 - 27, 2026

Arlington, TX

Mar 17 - 20, 2026

Live Webcast

Apr 13 - 16, 2026

Houston, TX

May 5 - 8, 2026

Albuquerque, NM

May 12 - 15, 2026

Live Webcast

Jun 23 - 26, 2026

Irving, TX

Jun 30 - Jul 3, 2026

San Antonio, TX

Jul 7 - 10, 2026

Live Webcast

Aug 25 - 28, 2026

Live Webcast

Oct 6 - 9, 2026

Live Webcast

Oct 12 - 15, 2026

Houston, TX

Oct 20 - 23, 2026

Arlington, TX

OSHA #2055

Cranes in Construction 22.5 Hours | $650

Contract | $8,000

This course covers best practices in crane and derrick operation using as a guide the OSHA Cranes and Derricks in Construction Rule. Course topics include hazards associated with crane assembly and disassembly; types of cranes; lifting concepts; rigging and wire rope; signaling; employee qualifications and training; and maintenance, repair, and inspection requirements. Participants will participate in workshops to reinforce the concepts of safe crane operation.

Feb 24 - 26, 2026

Houston, TX

Feb 24 - Mar 5, 2026

Live Webcast

Evening

May 19 - 21, 2026

Live Webcast

Jul 7 - 9, 2026

Oklahoma City, OK

Jul 14 - 16, 2026

Albuquerque, NM

Oct 13 - 15, 2026

Austin, TX

Oct 19 - 21, 2026

Houston, TX

Nov 10 - 12, 2026

Live Webcast

Dec 8 - 10, 2026

Live Webcast

The University of Texas at Arlington | OSHA Education Center

En Español

OSHA COURSES Aug 11 - 13, 2026

Live Webcast

Aug 18 - 20, 2026

Albuquerque, NM

Aug 25 - 27, 2026

Houston, TX

This course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer’s ergonomic programs, and conduct ergonomic evaluations.

Sep 1 - 11, 2026

Live Webcast

This course satisfies the training prerequisite for the Authorized Trainer Program designations in Ergonomics and Material Handling.

Permit-Required Confined Space Entry

UPDATED OSHA #2255 Principles of Ergonomics 22.5 Hours | $650

Contract | $8,000

Feb 24 - 26, 2026

Live Webcast

Mar 3 - 5, 2026

Arlington, TX

Mar 24 - Apr 2, 2026

Live Webcast

Evening

Jul 21 - 23, 2026

Live Webcast

Sep 1 - 3, 2026

Arlington, TX

OSHA #2455

Safety and Health Management Program 22.5 Hours | $650

Contract | $8,000

This course covers safety and health management responsibilities. Participants will be able to implement a workplace Safety and Health Management Program (SHMP) according to OSHA’s Recommended Practices for Safety and Health Programs and related guidance. The course covers the fundamentals of occupational safety and health management program (SHMP), SHMP recordkeeping requirements, and how to assess workplace safety and health management program. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Safety & Health Program Management.

Jan 20 - 22, 2026

Live Webcast

Jan 27 - 29, 2026

Oklahoma City, OK

Feb 17 - 19, 2026

Arlington, TX

Feb 24 - 26, 2026

Albuquerque, NM

Feb 24 - 26, 2026

Houston, TX

Mar 3 - 5, 2026

Live Webcast

Mar 17 - 19, 2026

Austin, TX

Mar 31 - Apr 2, 2026

Arlington, TX

Apr 7 - 9, 2026

Live Webcast

En Español

Apr 14 - 16, 2026

Live Webcast

May 26 - 28, 2026

Live Webcast

Jun 9 - 11, 2026

Arlington, TX

Jun 15 - 17, 2026

Houston, TX

Jul 1-3, 2026

Live Webcast

Jul 21 - 23, 2026

Tulsa, OK

Jul 28 - 30, 2026

Irving, TX

Evening

Sep 8 - 10, 2026

San Antonio, TX

Sep 22 - 24, 2026

Arlington, TX

Sep 29 - Oct 1, 2026

Live Webcast

Oct 6 - 8, 2026

Live Webcast

En Español

OSHA #2264

22.5 Hours | $650

Contract | $8,000

This course covers the safety and health hazards associated with permit-required confined space entry. Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course features workshops on permit entry classification, instrumentation, and program development. Upon course completion students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standard, conduct atmospheric testing, and implement a permit-required confined space program. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Confined Space.

Jan 6 - 8, 2026

Oklahoma City, OK

Feb 3 - 5, 2026

Live Webcast

Feb 17 - 19, 2026

Live Webcast

En Español

Mar 3 - 5, 2026

Arlington, TX

Mar 10 - 12, 2026

Live Webcast

Mar 24 - 26, 2026

Houston, TX

Mar 30 - Apr 2, 2026

Irving, TX

Apr 7 - 9, 2026

Albuquerque, NM

Apr 14 - 16, 2026

Live Webcast

Apr 21 - 23, 2026

San Antonio, TX

May 12 - 14, 2026

Live Webcast

May 19 - 21, 2026

Arlington, TX

Jun 16 - 18, 2026

Live Webcast

Jul 14 - 16, 2026

Houston, TX

Aug 4 - 6, 2026

Live Webcast

Aug 18 - 20, 2026

Arlington, TX

Sep 1 - 3, 2026

Live Webcast

Sep 15 - 17, 2026

Oklahoma City, OK

Oct 6 - 8, 2026

Live Webcast

Oct 13 - 15, 2026

El Paso, TX

Oct 20 - 29, 2026

Evening

Live Webcast

866-906-9190 | uta.edu/ded/osha

OSHA COURSES OSHA #3015

OSHA #3095

Excavation, Trenching, and Soil Mechanics 22.5 Hours | $650

Electrical Standards Contract | $8,000

26 Hours | $650

Contract | $8,500

This course focuses on the operations and safety aspects of excavation and trenching. Participants are introduced to practical soil mechanics and its relationship to the stability of shored/unshored slopes and walls. Various types of shoring (wood timbers and hydraulic) are explained. Testing methods are demonstrated, allowing students to use instruments such as penetrometers, torvane shears, and engineering rods. Upon successful completion of this course, students will have the ability to assess employer safety with the current standard, utilize soil-testing methods to classify soil types, determine protective systems for excavation operations, and determine training requirements.

This course covers the OSHA Electrical Standards and hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters (GFCI), and safety-related work practices. Emphasis is on electrical hazard recognition, OSHA Standards and policies, hazard recognition and abatement measures, and procedures. Applicable portions of the National Electrical Code (NEC) are also covered. Participants will participate in workshops on the safe and correct use of electrical testing equipment.

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Excavation & Trenching.

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Electrical.

Jan 13 - 15, 2026

Houston, TX

Jan 27 - 29, 2026

Arlington, TX

Jan 20 - 23, 2026

Live Webcast

Feb 10 - 12, 2026

San Antonio, TX

Jan 27 - 30, 2026

Live Webcast

Feb 17 - 19, 2026

Live Webcast

Feb 24 - 26, 2026

Live Webcast

En Español

Mar 10 - 12, 2026

Tulsa, OK

Mar 31 - Apr 2, 2026

El Paso, TX

Apr 7 - 9, 2026

Freeport, TX

Apr 14 - 16, 2026

Live Webcast

Apr 21 - 23, 2026

Arlington, TX

Apr 28 - 30, 2026

Albuquerque, NM

May 5 - 15, 2026

Evening

Live Webcast

Jun 9 - 11, 2026

Live Webcast

Jul 7 - 9, 2026

Houston, TX

Jul 14 - 16, 2026

Arlington, TX

Jul 21 - 23, 2026

Austin, TX

Jul 28 - 30, 2026

Live Webcast

Sep 22 - 24, 2026

Live Webcast

Sep 29 - Oct 1, 2026

Houston, TX

Oct 6 - 8, 2026

Arlington, TX

SH 321

NFPA 70E Electrical Safety in the Workplace 16 Hours

Contract | $6,000

This course covers methods to minimize the risk of employee injuries from electrical hazards and establish a safer workplace for employees who work on electrical equipment. Topics include the elements of an electrically safe work condition, the principles of lockout/tagout, energy control procedures and the use of temporary protective grounding equipment, safety guidelines work where de-energizing is not possible, general requirements for personal protective equipment (PPE) and flame-resistant (FR) clothing and how to select PPE for the specific hazards involved with various tasks.

Jan 26 - 29, 2026

Evening

Live Webcast

Apr 21 - 22, 2026

Live Webcast

Jul 14 - 15, 2026

Live Webcast

Oct 20 - 21, 2026

Live Webcast

En Español

Feb 3 - 6, 2026

Arlington, TX

Feb 10 - 13, 2026

Live Webcast

Feb 17 - 20, 2026

Oklahoma City, OK

Mar 3 - 6, 2026

Live Webcast

Mar 9 - 12, 2026

Houston, TX

Mar 24 - 27, 2026

Arlington, TX

Apr 7 - 10, 2026

Live Webcast

Apr 14 - 17, 2026

Austin, TX

May 5 - 8, 2026

Live Webcast

May 19 - 22, 2026

Irving, TX

May 26 - 29, 2026

Albuquerque, NM

Jun 2 - 5, 2026

Live Webcast

Jun 9 - 12, 2026

Arlington, TX

Jun 29 - Jul 2, 2026

Houston, TX

Jul 7 - 10, 2026

Live Webcast

Jul 28 - 31, 2026

Live Webcast

Aug 3 - 13, 2026

Live Webcast

Evening

Aug 18 - 21, 2026

Arlington, TX

Aug 25 - 28, 2026

Tulsa, OK

Sep 1 - 4, 2026

Live Webcast

Sep 21 - 24, 2026

Houston, TX

Sep 29 - Oct 2, 2026

Live Webcast

Oct 6 - 9, 2026

San Antonio, TX

Oct 13 - 16, 2026

Arlington, TX

Oct 27 - 30, 2026

Live Webcast

Nov 3 - 6, 2026

El Paso, TX

Dec 1 - 4, 2026

Live Webcast

Dec 15 - 18, 2026

Arlington, TX

The University of Texas at Arlington | OSHA Education Center

OSHA COURSES OSHA #3115

OSHA #3085

Principles for Scaffolding

Fall Protection 22.5 Hours | $650

Contract | $8,000

22.5 Hours | $650

Contract | $8,000

This course covers OSHA Fall Protection Standards for construction, as well as an overview of fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. participants will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. Upon course completion participants will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans.

This course covers the requirements for the safe construction and use of scaffolding. Participants will participate in workshops to reinforce concepts of safe scaffolding. Upon course completion, participants will be able to identify the types of scaffolds and their components, determine safe assembly, use, and disassembly of scaffolding, and recognize common violations of OSHA Standards.

Jan 13 - 15, 2026

Arlington, TX

This course satisfies the training prerequisite for the Authorized Trainer Program designations in Fall Protection, Fall Protection Equipment Inspection, Ladders, and Ladder Inspection.

Jan 27 - 29, 2026

Albuquerque, NM

Feb 3 - 5, 2026

Houston, TX

Mar 17 - 19, 2026

Arlington, TX

Apr 28 - 30, 2026

Houston, TX

May 5 - 7, 2026

Arlington, TX

May 12 - 14, 2026

Austin, TX

Jun 16 - 18, 2026

Arlington, TX

Jul 21 - 23, 2026

Houston, TX

Aug 4 - 6, 2026

El Paso, TX

Aug 25 - 27, 2026

Arlington, TX

Sep 22 - 24, 2026

Houston, TX

Sep 29 - Oct 1, 2026

Albuquerque, NM

Oct 20 - 22, 2026

Oklahoma City, OK

Nov 3 - 5, 2026

Arlington, TX

Dec 15 - 17, 2026

San Antonio, TX

Jan 6 - 8, 2026

Arlington, TX

Jan 13 - 15, 2026

Live Webcast

Jan 20 - 22, 2026

Oklahoma City, OK

Feb 3 - 5, 2026

Live Webcast

Feb 10 - 12, 2026

Houston, TX

Feb 24 - 26, 2026 Mar 10 - 12, 2026

Irving, TX En Español

Live Webcast

Mar 17 - 19, 2026

Arlington, TX

Mar 24 - 26, 2026

Live Webcast

Apr 21 - 23, 2026

Live Webcast

May 5 - 7, 2026

Houston, TX

May 19 - 21, 2026

Live Webcast

May 26 - 28, 2026

Arlington, TX

Jun 2 - 4, 2026

San Antonio, TX

Jun 23 - 25, 2026

Albuquerque, NM

Jun 30 - Jul 2, 2026

Live Webcast

Jul 21 - 23, 2026

Arlington, TX

Jul 28 - 30, 2026

Houston, TX

Aug 4 - 6, 2026

Live Webcast

Aug 18 - 27, 2026

Live Webcast

Evening

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Scaffolding.

NEW! OSHA #3365 Occupational Safety and Health Hazards in the Healthcare Industry 30 Hours | $650

Contract | $9,000

This course provides an overview of OSHA standards applicable to the healthcare industry. Topics include common healthcare facility types, worker roles, and prevalent workplace hazards. Participants will explore applicable OSHA standards, injury and illness recordkeeping requirements, and available compliance resources. Emphasis is placed on identifying physical and health-related hazards, evaluating workplace conditions, and applying effective hazard control strategies to protect healthcare workers.

Sep 8 - 10, 2026

Live Webcast

Oct 6 - 8, 2026

Houston, TX

Jan 6 - 9, 2026

Live Webcast

Oct 13 - 15, 2026

Arlington, TX

Mar 16 - 19, 2026

Houston, TX

Oct 20 - 22, 2026

Live Webcast

Apr 14 - 17, 2026

Arlington, TX

Oct 27 - 29, 2026

Oklahoma City, OK

May 26 - 29, 2026

Live Webcast

Nov 10 - 12, 2026

Austin, TX

Sep 29 - Oct 2, 2026

Live Webcast

Nov 17 - 19, 2026

Live Webcast

Oct 27 - 30, 2026

Arlington, TX

Dec 1 - 3, 2026

El Paso, TX

Nov 30 - Dec 3, 2026

Houston, TX

866-906-9190 | uta.edu/ded/osha

OSHA SHORT COURSES OSHA #7000

OSHA Training Guidelines for Safe Patient Handling 7.5 Hours

Contract | $4,000

This course covers OSHA ergonomics guidelines for safe patient handling and methods to protect workers in healthcare settings, including facilities, home health care, and hospice. Course topics include developing an ergonomic program, risk factors in patient handling and transfers, identifying work processes with the potential for musculoskeletal injuries and illnesses, protocol for resident and patient assessment, and implementing solutions including work practices and engineering controls. Students will learn to analyze and identify ergonomic hazards and practical solutions to reduce musculoskeletal injuries and illnesses in their workplace.

Feb 16, 2026

Evening & Free

Live Webcast

Evening

Live Webcast

Oct 12 - 13, 2026

OSHA #7005

Safe Bolting: Principles and Practices 7.5 Hours

7.5 Hours

Contract | $4,000

This course covers the hazards and injuries likely to occur in public warehousing and storage operations, including encounters with powered industrial trucks, material handling, lifting and ergonomics, hazard communication, walking and working surfaces, and life safety including fire protection and evacuation. Upon course completion participants will have the ability to recognize the potential for injuries from forklifts, material handling and lifting, exposure to hazardous substances, slips, trips, and falls and methods to control and abate these hazards.

Free

Live Webcast

May 18, 2026

Live Webcast

Jul 14 - 15, 2026

Evening

Live Webcast

Aug 17, 2026

Free

Live Webcast

OSHA #7100

Introduction to Machinery and Machine Safeguarding 4 Hours

Contract | $3,500

This course covers the process to identify, select and properly safeguard machinery to protect employees and others in the work area and deliver appropriate training in safe work practices. Upon course completion participants will have the ability to explain hazardous actions and motions of various types of machinery, identify methods of safeguarding, and match identified safeguards with the applicable OSHA Machinery and Machine Guarding Standards to reduce and eliminate the potential for accidents and injuries.

OSHA #7105

Evacuation and Emergency Planning 4 Hours | $225

Training schemes to include principles of structural connection standards for performance demonstration within the industry. The objectives of the BCSA Competence in Pre-loadable Bolting scheme are to give confidence in the effectiveness of training through performance demonstration at the appropriate level.

OSHA #7115

Lockout/Tagout

Jun 1 - 2, 2026

Evening

Live Webcast

Jul 20 - 21, 2026

en Español/Por la tarde

Live Webcast

OSHA #7120

Introduction to Combustible Dust Hazards 7.5 Hours

Jun 22, 2026

Free

Live Webcast

Sep 14 - 15, 2026

Evening

Live Webcast

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Emergency Action & Fire Prevention Planning.

Free

Live Webcast

Dec 7, 2026

Evening

Live Webcast

Contract | $4,000

The focus of this course is to provide private businesses in general industry with an opportunity to enhance their awareness of the hazards posed by combustible dust. This course will help these industry leaders to gain the knowledge and strategies that can help them to assure employee safety while using or producing materials that generate combustible dust. The course will focus on recognizing the hazards and risks associated with combustible dust, as well as developing the controls and strategies that can help them prevent or mitigate combustible dust fires and explosions.

Contract | $3,500

May 18, 2026

Contract | $4,000

This course covers the role and responsibility of the employer to develop and implement an energy control program, or lock-out/tag-out (LOTO) for the protection of workers while performing servicing and maintenance activities on machinery and equipment. Course topics include types of hazardous energy, detecting hazardous conditions, implementing control measures as they relate to the control of hazardous energy, developing and implementing energy control programs including written isolation procedures, training of authorized and affected employees, and periodic inspection of energy control procedures using the OSHA Control of Hazardous Energy Standard. Upon course completion the student will have the ability to explain the importance of energy control programs, procedures, training, audits and methods of controlling hazardous energy.

This course covers the OSHA requirements for emergency action and fire protection plans. Course topics include purpose and requirements of emergency action and fire prevention plans, elements of emergency evacuation plans, and features of design and maintenance of emergency exit routes. Workshops involve participants in the development of emergency action plans. Participants will be able to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, and develop and implement workplace emergency action and fire protection plans.

Contract | $4,000

Methods of managing the assembly of bolted connections relating to critical stages in the construction and the BCSA Competence in Pre-loadable Bolting scheme appropriate for qualification of the following personnel: Level 3 - Bolting Coordinator, Level 2 - Bolting Inspector, and Level 1 - Bolting Practitioner.

7.5 Hours | $250

Warehousing and Storage

Feb 2, 2026

OSHA #7110

The University of Texas at Arlington | OSHA Education Center

OSHA SHORT COURSES OSHA #7200

OSHA #7225

Bloodborne Pathogen Exposure Control 7.5 Hours

Transitioning to Safer Chemicals Contract | $4,000

This course covers the development and implementation of Exposure Control Plans (ECP). Course topics include understanding the OSHA Bloodborne Pathogens Standard, determining potential exposure and methods of control, developing an ECP, vaccinations, exposure incidents, training, and record keeping. The target audience is the program administrator, manager, or other personnel designated with the responsibility of developing a Bloodborne Pathogens ECP. Course highlights include students developing a template for their facility’s ECP. Upon course completion, participant will have the ability to take a systematic approach in developing an ECP.

Mar 9, 2026

Free

Live Webcast

Nov 30 - Dec 1, 2026

Evening

Live Webcast

OSHA #7205

Health Hazard Awareness 7.5 Hours

Contract | $4,000

This course covers common health hazards that are encountered in the workplace. These health hazards include exposure to chemicals, asbestos, silica and lead. Course topics include identification and evaluation of health hazards and their sources of exposure, health hazard information, and engineering and work practice controls. Students participate in workshops on evaluation and abatement of workplace health hazards. Upon course completion students will have the ability to understand common health hazards in the workplace and methods for controlling and abatement of these hazards.

Jul 27, 2026 Sep 14, 2026

Free

Oklahoma City, OK Live Webcast

OSHA #7210

Pandemic Illness Preparedness 7.5 Hours

Contract | $4,000

This course covers recognition of hazards and risks associated with a pandemic illness event and development of strategies to assist a business, community, or family with realistic preparation for a pandemic event. Course topics include potential impact of a pandemic illness event on a business and community, critical elements of a preparedness plan, and realistic strategies for supporting continuity of operations. This course offers information on strategies that can be used to control the spread of the illness, minimization of exposure to employees and family, and resources available from OSHA and other government agencies. The intended audience is the business leader and members of their management team who may be integral to preparedness planning. Upon course completion, students will have the ability to prepare for a pandemic to assure business continuity and employee safety.

Nov 16, 2026

Evening & Free

Live Webcast

OSHA #7215

Silica in Construction, Maritime, and General Industries 7.5 Hours

Contract | $4,000

This course covers the development and implementation of controls and strategies to prevent or mitigate silica exposures in construction, maritime, and general industries. Course topics include describing the requirements of OSHA’s Respirable Crystalline Silica standards and recognizing the hazards and risks, assessment options, and exposure control measures associated with silica exposure.

Jun 1, 2026

Free

7.5 Hours | $250

Contract | $4,000

This course covers a proactive approach to reducing the use of hazardous chemicals in the workplace by transitioning to safer alternatives. Course topics include identification, evaluation, assessment, and implementation of safer chemical alternatives. In particular, participants will use OSHA’s seven-step substitution planning process. The course features workshops and hands-on activities with the use of various online chemical databases and tools. The target audience is purchasing staff, maintenance supervisors, facility managers, and workers who utilize hazardous chemicals at their worksites, along with occupational safety and health professionals who provide technical assistance on the control of chemical hazards. Upon course completion participants will have the ability to recognize and evaluate hazardous chemicals in their workplace, assess safer alternatives, and implement those alternatives.

Jul 27 - 28, 2026

Evening

Live Webcast

Oct 19, 2026

Free

Live Webcast

OSHA #7230

Infectious Disease Preparedness in the Workplace 7.5 Hours

Contract | $4,000

This one-day course is an introduction to protecting employees from infectious diseases in the workplace. Course topics include the definition of infectious disease, modes of transmission, specific types of infectious diseases, OSHA standards, and other industry requirements. Additionally, training will cover worker exposure classification, recordkeeping, and basic control measures, highlighting types of infectious diseases and OSHA standards, and drafting highlights highlighting types of infectious diseases, OSHA standards, and an infectious disease protection plan.

Apr 20 - 21, 2026

Evening

Live Webcast

Jul 20, 2026

Free

Live Webcast

OSHA #7300

Understanding OSHA’s Permit-Required Confined Space Standard 7.5 Hours | $250

Contract | $4,000

This course covers the requirements of the OSHA Permit-Required Confined Space Standard. Course topics include safety and health hazards associated with confined space entry, and the evaluation, prevention, and abatement of these hazards. The course covers OSHA requirements; it does not feature workshops (instrumentation, control methods and testing) which are included in the OSHA #2264 Permit-Required Confined Space Entry. This course is designed for small employers or a designated representative with the responsibility to develop a permit-required confined space program. Upon course completion students will have a basic understanding of confined space hazards, evaluating and abatement of the hazards, and determining when a confined space shall be classified as a permit-required confined space. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Confined Space.

Apr 27, 2026

Free

Arlington, TX

Apr 27, 2026

Free

Houston, TX

Apr 27, 2026

Free

Live Webcast

866-906-9190 | uta.edu/ded/osha

OSHA SHORT COURSES OSHA #7400

OSHA #7415

Occupational Noise Exposure Standards 7.5 Hours | $250

Construction Industry Hazards and Prevention Strategies Contract | $4,000

This course covers the evaluation and reduction of noise hazards in the construction industry. Course topics include OSHA Construction Noise Standards, properties of sound, noise-induced hearing loss, noise exposure control, the selection and use of hearing protection, conducting sound level surveys, and worker training. Classroom demonstrations cover noise instrumentation and hearing protection devices. Students will understand the properties of sound and its relationship to noise-induced hearing loss, hearing protection usage, how to conduct sound level surveys, and the requirements for training workers.

Contract | $6,000

This course provides the participant with pertinent information regarding OSHA requirements and guidelines for construction industry activities and operations. Topics include recognition of major safety and health hazards in the construction industry, prevention strategies, safety and health management systems, OSHA requirements and guidelines, and resources available. The course is an interactive training session focusing on class discussions and workshops. The course will help the participant know the major construction hazards and prevention strategies.

OSHA #7500

OSHA #7405

Fall Hazard Awareness for the Construction Industry 7.5 Hours | $250

Contract | $4,000

This course covers the identification, evaluation, prevention and control of fall hazards in the construction industry. The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls. Course topics include identifying, analyzing, and preventing fall hazards utilizing OSHA Fall Protection Standards. At the conclusion of the course, participants will have an awareness level of identifying fall hazards and methods to control and abate the hazards. This course satisfies the training prerequisite for the Authorized Trainer Program designations in Fall Protection, Fall Protection Equipment Inspections, Ladders, and Ladder Inspection.

May 4, 2026

Free

Arlington, TX

May 4, 2026

Free

Houston, TX

May 4, 2026

Free

Live Webcast

OSHA #7410

7.5 Hours | $250

Introduction to Safety & Health Management 7.5 Hours | $250

Contract | $4,000

This course covers the requirements to manage excavation/trenching operations. The course will include an understanding of the OSHA excavation requirements, excavation/ trenching hazards, and control measures. Additionally, participants will learn about soil analysis techniques and protective system requirements. At the conclusion of this course, the participant will understand how to manage trenching/excavation operations. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Excavation and Trenching.

Jun 29, 2026

Gratis y en Español

Live Webcast

Aug 10, 2026

Free

Arlington, TX

Aug 10, 2026

Free

Live Webcast

Aug 14, 2026

Free

Houston, TX

OSHA #7505

Introduction to Incident (Accident) Investigation

Jan 5 - 6, 2026

Free

Arlington, TX

May 11, 2026

Jun 15, 2026

Free

Live Webcast

Nov 2, 2026

Jun 18, 2026

Houston, TX

Dec 14 - 15, 2026

Live Webcast

JOIN US! JUNE 16-20, 2026

Trench Safety Stand Down

This is a significant initiative to raise awareness about trenching and excavation hazards and collaborative effort between the National Utility Contractor and OSHA.

Contract | $4,000

This course introduces basic accident investigation procedures and describes accident analysis techniques and is intended for employers, managers, employees, and employee representatives involved in conducting accident and/or near-miss investigations. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six-step accident investigation procedure. Upon course completion participants will have the basic skills necessary to conduct an effective accident investigation at the workplace. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Accident/Incident Investigation.

Jun 15, 2026

Evening

Contract | $4,000

This course covers the implementation of an effective safety and health management system. The course addresses the core elements of an effective safety and health management system and those central issues that are critical to management of each element. This interactive training session, with class discussion and workshops, provides participants with the ability to evaluate, develop, and implement an effective safety and health management system.

7.5 Hours | $250

Managing Excavation and Trenching Operations

15 Hours

Evening

Live Webcast Live Webcast

Free

Live Webcast

OSHA #7510

Introduction to OSHA for Small Business 4 Hours | $225

Contract | $3,500

This course covers an introduction to the Occupational Safety and Health Administration (OSHA) and the OSH Act for owners and managers of small businesses. Course topics include an introduction to OSHA, OSHA Standards, the inspection process, implementation of a safety and health program, worker training requirements and assistance available to small businesses. Upon course completion participants will understand OSHA operations and procedures and how to work with OSHA to prevent or reduce injuries and illnesses in their workplace.

Jul 7, 2026

The University of Texas at Arlington | OSHA Education Center

Evening

Live Webcast

OSHA SHORT COURSES OSHA #7515

OSHA #7845

Recordkeeping Rule Seminar

Job Hazard Analysis (JHA) 7.5 Hours | $250

4 Hours | $225

Contract | $4,000

Apr 20, 2026

Free

Live Webcast

Sep 21, 2026

Live Webcast

Contract | $3,500

This course covers OSHA requirements for maintaining and posting records of occupational injuries and illnesses, and reporting specific cases to OSHA. Upon course completion participants will have the ability to identify OSHA requirements for recordkeeping, posting and reporting, and to complete OSHA Form 300 Log of WorkRelated Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and OSHA Form 301 Injury and Illness Incident Report. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Recordkeeping.

This course covers OSHA guidelines for developing a Job Hazard Analysis. Course topics include the purpose and requirements of a job hazard analysis, the relationship between worker tasks and tools in a work environment, identifying job hazards before they occur, and techniques for completing a job hazard analysis. Participants will participate in activities about utilizing a job hazard analysis. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Job Hazard Analysis.

Jan 12, 2026

Live Webcast

Jan 19, 2026

Free

Oklahoma City, OK

Jun 9, 2026

Evening

Live Webcast

Jun 30, 2026

Gratis y en Español

Live Webcast

LAUNCH YOUR HEALTHCARE CAREER NO DEGREE REQUIRED READY TO MAKE A MEANINGFUL IMPACT?

UTA’s Health Careers Institute offers fast-track, affordable programs designed to get you job-ready in today’s healthcare industry.

WHY HEALTH CAREERS INSTITUTE? Flexible evening, weekend & online courses

Accelerated programs—many completed in 6 months or less

Training aligned with current employer needs

TAKE THE NEXT STEP

EXPLORE OUR CERTIFICATION PROGRAMS: • Clinical Medical Assistant • Dental Assistant • EKG/ECG Technician • Medical Coding & Billing/

EXPLORE PROGRAMS at UTA.EDU/DED/HCI

Medical Administrative Assistant • Phlebotomy Technician • Sterile Processing Technician

• Mental Health Technician • Pharmacy Technician …AND MORE!

866-906-9190 | uta.edu/ded/osha

Become a UTA

Authorized Safety and Health Trainer 2-38255854 UT Arlington Division for Enterprise Development This card acknowledges that the recipient has successfully completed

EARN A BADGE AND ATP TRAINER CARD ATP 191

Safety and Health Authorized Trainer 32 Hours | $720

Contract | $9,500

This course incorporates an overview of instructional strategies, design, and practices for adult learning settings. It explores situational and cultural factors that influence adult learning and reviews the requirements of ANSI Z490.1 on how to create, maintain, and evaluate effective EH&S training. Various instructional approaches, classroom management techniques, and the effective use of visual aids and handouts will be covered. Participants will develop informational presentations based upon the technical instruction and individual research requirements. Instruction and hands-on exercises on specific safety and health topics will be provided. The course includes teach-back sessions to apply the adult learning techniques and effective safety and health training knowledge and skills.

UTA Authorized Safety & Health Trainer Participant Name

Trainer

Trainer Name

Date

Date of Issue

Modeled after the OSHA Outreach Program, the goal of the UT Arlington Authorized S&H Trainer Program is to provide training for workers about workplace hazards and safe work practices. Individuals designated as UTA authorized safety & health trainers address the recognition, avoidance, abatement, and prevention of safety and health hazards associated with specific issues in the workplace. COMPLETE THE ATP 191 AND TRAIN THESE TOPICS 8- or 24-hour Training Course in Construction

Job Hazard Analysis (JHA)

Refresher Training: Authorized Trainers are required to attend the ATP 190O Online Update for Safety and Health Authorized Trainers at least once every three (3) years to maintain their trainer status.

8- or 24-hour Training Course in General Industry

Ladder Inspection Lockout/Tagout

Prerequisites: Participants must have three (3) years of safety and health work experience in any industry, or be a current authorized OSHA Outreach trainer.

8- or 24-hour Training Course in Maritime Accident/Incident Investigation Blueprint Reading

Jan 26 - 29, 2026

Houston, TX

Mar 10 - 13, 2026

Arlington, TX

Mar 17 - 20, 2026

Live Webcast

Cranes/Rigging

Apr 21 - 24, 2026

Austin, TX

Disaster Response

Bloodborne Pathogens Confined Space

Ladders Machine Operation Material Handling Noise Occupational Health Office Safety Oil & Gas Pandemic Microbial Infections

Live Webcast

Electrical

Sep 8 - 11, 2026

Houston, TX

EM 385-1-1

Personal Protective Equipment

Sep 15 - 18, 2026

Live Webcast

Recordkeeping

Sep 29 - Oct 2, 2026

Arlington, TX

Emergency Action & Fire Prevention Planning

Respiratory Protection

Equipment Inspection

Rigging

Ergonomics

Risk Management

Excavation & Trenching Fall Protection

Safety & Health Program Management

Fall Protection Equipment Inspection

Safety Metrics Scaffolding

Fire & Safety

Signalperson

Hazard Communication/GHS

Silica

Jun 15 - 25, 2026

Evening

STAY CURRENT & RENEW ONLINE! View our ONLINE courses

ATP 190O

Online Update for Safety & Health Authorized Trainers

Healthcare

Tool Safety

$145 | 8 Hours

Hot Work

Welding & Cutting

Available on dedtraining.com

Hydrogen Sulfide

The University of Texas at Arlington | OSHA Education Center

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

RISK MANAGEMENT COURSES MC

RM 101

RM 202

Safety, Health, and Environmental Risk Management (SHERM) Principles 32 Hours | $750

MASTER CERTIFICATION

Performance Measurement and Data Analysis Contract | $9,000

This course provides an overview of risk management from the safety, health, and environmental program perspective. Specific topics covered include introduction to risk management using ISO STD 31000, key terminology, describing and applying the risk management process, and suggested strategies for improving environmental, health, and safety (EHS) programs using risk management principles. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Risk Management.

36 Hours | $895

Contract | $10,000

In this course, participants gain the knowledge and skills necessary to establish, implement, and maintain an effective performance measurement system, as well as perform effective data analysis and trending. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Risk Management.

Mar 30 - Apr 3, 2026

Live Webcast

Sep 14 - 18, 2026

Live Webcast

Jan 6 - 9, 2026

Arlington, TX

Jan 27 - 30, 2026

Live Webcast

Mar 9 - 12, 2026

Live Webcast

Apr 28 - May 1, 2026

Live Webcast

May 12 - 15, 2026

Albuquerque, NM

May 26 - 29, 2026

Houston, TX

Jun 9 - 12, 2026

Live Webcast

This course employs a combination of illustrated case studies, lectures, and individual and group exercises to introduce participants to the various methodologies, tools, and practical applications of risk-informed decision making. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Risk Management.

Jun 23 - 26, 2026

Arlington, TX

Apr 21 - 23, 2026

Live Webcast

Jul 21 - 24, 2026

Live Webcast

Oct 27 - 29, 2026

Live Webcast

Aug 4 - 7, 2026

Austin, TX

Sep 1 - 4, 2026

Live Webcast

Sep 22 - 25, 2026

Oklahoma City, OK

RM 203

MASTER CERTIFICATION

Risk Informed Decision Making 24 Hours | $895

Contract | $10,000

RM 730

Operational Risk Management and Job Hazard Analysis (JHA)

Live Webcast

24 Hours

Oct 13 - 16, 2026

Live Webcast

Nov 2 - 5, 2026

Houston, TX

Dec 15 - 18, 2026

Live Webcast

This course will teach you how to apply Operational Risk Management (ORM) to situations and environments across a wide range of operations, activities, and processes. ORM is a decision-making tool to systematically help identify operational risks and benefits and determine the best courses of action for any given situation. ORM is designed to minimize risks in order to reduce incidents, preserve assets, and safeguard the health and welfare. This course examines the principles, functions, methods, and tools of ORM.

Sep 28 - Oct 8, 2026

Evening

RM 201

MASTER CERTIFICATION

RM 750

Assessment Techniques 24 Hours | $895

Contract | $8,500

Contract | $10,000

This course provides participants with techniques used to prepare for and conduct assessments, identify issues, and the disposition of identified issues. Assessments are used to systematically gather information, which is analyzed against approved criteria to identify potential issues related to compliance, performance, and effectiveness. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Risk Management.

Risk Communication - What Are You Really Saying? 8 Hours

Contract | $4,000

This course discusses the psychology of risk communication and provides techniques and tools for effective risk communication covering communication planning to include problem definition, analysis, implementation of intervention, evaluation, and feedback.

RM 785

Jan 20 - 22, 2026

Live Webcast

Root Cause Analysis

Jun 30 - Jul 2, 2026

Live Webcast

16 Hours

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

Contract | $7,500

This workshop provides participants the basic skills necessary to conduct an effective incident investigation and determine the root causes of incidents. The course reviews basic incident investigation procedures and describes incident analysis techniques with emphasis on the use of Root Cause Analysis. Participants will use systems thinking and related tools and techniques to identify contributing and causal factors that underlie variations in performance associated with adverse events or close calls. The course integrates a number of different analysis methods using actual case studies to demonstrate their advantages, disadvantages, and applications. Participants will engage in a variety of instructional activities including lectures, group discussions, quizzes, and practical exercises to reinforce their understanding and use various techniques for Root Cause Analysis.

866-906-9190 | uta.edu/ded/osha

SAFETY & HEALTH MANAGEMENT Move your personal career and your organization’s EHS program to the next level.

SH 801

Enhancing Safety Performance with Behavioral Safety: Current Trends in BBS 24 Hours | $895

Training provides real-world information that can be immediately applied in your workplace. • Learn to successfully communicate EHS to employees and executives • Continue to develop professionally in a growing and evolving career field • Create a network with those who share similar insight and commitment MC

MS 901

MASTER CERTIFICATION

Contract | $11,000

This course is designed to provide participants with a thorough understanding of Behavior-Based Safety and begins with the evolution of BBS, including the underlying principles, common myths and half-truths. Long-term goals for BBS are identified, along with proven steps organizations can take that lead to safety excellence. Participants will learn how to develop observation and feedback skills, how to use behavioral data to improve performance, and strategies to motivate employee safety performance.

Feb 10 - 12, 2026

Live Webcast

Oct 20 - 22, 2026

Live Webcast

MASTER CERTIFICATION

Management System Design for EHS 92 Hours | $2,895

Contract | $27,000

This management system course provides participants the opportunity to design the core elements of a management system for environmental, risk, safety, and health programs. The goal of this course is to assist participants in the design and development of an effective management system through classroom instruction, case studies, and participant exercise activities. Participants must be available to attend all three sessions. Note: Due to course content, we recommend attending your MC electives prior to taking the MS 901.

SH 810

MASTER CERTIFICATION

Written Programs for Safety & Health Management 40 Hours | $995

Contract | $11,000

This course addresses the eight core elements of an effective safety and health system and those central issues that are critical to each element’s development, implementation, and proper management through the use of written material. Using a hands-on approach, participants will have the opportunity to develop policies, procedures, and checklists that are required to effectively manage a safety and health management system. It includes a course completion certificate for the OSHA #7500.

This course satisfies the training prerequisite for the Authorized Trainer Program designations in Safety & Health Program Management and Safety Metrics.

Jun 1 - 5, 2026

Session 1: Jan 12 - Mar 5, 2026

Live Webcast

AVAILABLE BY CONTRACT

Session 2: Feb 3 - 6, 2026

Live Webcast

Session 3: Mar 3 - 5, 2026

Live Webcast

SH 820

Session 1: Apr 6 - Jun 11, 2026

Arlington, TX

8 Hours

Session 2: May 5 - 8, 2026

Arlington , TX

Session 3: Jun 9 - 11, 2026

Arlington, TX

Session 1: Jul 6 - Sep 10, 2026

Live Webcast

Session 2: Aug 11 - 14, 2026

Live Webcast

Session 3: Sep 8 - 10, 2026

Live Webcast

MC MASTER CERTIFICATION

Safety & Health Culture Contract | $5,000

The use of a proactive approach to managing workplace safety and health lets you focus on achieving goals, monitoring performance, and evaluating outcomes so your workplace can progress to higher levels of safety and health achievement. The concept of continuous improvement is key. The idea is to begin with a basic program and simple goals and grow from there. MC

SH 900

MASTER CERTIFICATION

Leading Measures for Improving Safety NEW! SH 688 Energy Based Safety 16 Hours | $550

24 Hours | $895 Contract | $7,500

This course introduces participants to the Energy-Based Safety framework and the Safety Classification and Learning (SCL) Model developed by the Edison Electric Institute (EEI). The program equips participants with tools to identify, classify, and control hazardous energy sources across systems and operations. Learners will apply the SCL model to analyze incidents, evaluate energy control effectiveness, identify energy-based performance indicators, cross-reference SCL outcomes with injury rates and near-miss data, develop implementation roadmap for organizational adoption, and enhance learning from events.

Jun 29 - 30, 2026

Live Webcast

Contract | $11,000

This advanced safety and health course is designed to provide participants with the skill and knowledge to identify key steps in the performance measurement process and to develop implementation strategies for an organization. We will illustrate corporate success measures, reward and recognition programs, and identify potential pitfalls in performance measurement systems. Use of case studies, job safety analyses, infraction records, and near-miss (near-hit) reports will be used to demonstrate the practical application of the leading measure approach to improving performance. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Safety Metrics.

Feb 17 - 19, 2026

Live Webcast

Jul 28 - 30, 2026

Live Webcast

The University of Texas at Arlington | OSHA Education Center

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

SAFETY & HEALTH MANAGEMENT MC

SH 910

MASTER CERTIFICATION

Principles of Auditing 24 Hours | $895

Contract | $11,000

This course provides participants with the fundamental principles needed to conduct auditing activities related to regulatory compliance, contractual performance, and individual skills and knowledge. Participants will develop auditing skills including planning, procedures, evaluation, and management. The course specifically addresses training audits, contractor performance audits, and compliance audits.

Jul 14 - 16, 2026

Live Webcast

SH 920

MASTER CERTIFICATION

Process Safety Management (PSM) 32 Hours | $995

Contract | $12,000

Process Safety Management, or PSM, is an OSHA requirement for companies that use Highly Hazardous Chemicals (HHC) in their manufacturing processes. This course describes the procedures required by OSHA and instructs the participant in how to design a full implementation of a PSM program that addresses the hazardous issues and is compliant with the OSHA requirements. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Hot Work.

Mar 17 - 20, 2026

Live Webcast

Dec 1 - 4, 2026

Live Webcast

SH 925

MASTER CERTIFICATION

Management of Change 20 Hours | $530

Contract | $7,500

The management of change (MOC) is a control procedure critical to many industries and processes. Change is essential to a company’s productivity and needs to be managed. This two-and-half-day course will present methods to identify, review, approve, and implement changes within a management of change program through a series of exercises. After completing this course, participants will have tools to develop a management of change process.

Apr 7 - 9, 2026

Live Webcast

SH 930

MASTER CERTIFICATION

Project Management for EHS Professionals 28 Hours | $995

Contract | $12,000

Project Management is both an art and a science. This course introduces EHS professionals to the methodology, tools, and techniques needed to deliver successful projects. Participants will learn the fundamentals of the project management framework, consisting of project initiation, planning, execution, control, and closure. Through course exercises and scenarios, participants will build skills in assessing and managing stakeholders, identifying and controlling project scope, developing a Project Plan, as well as other critical project documentation, managing risks, and building the project schedule and budget.

Jun 23 - 26, 2026

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

Live Webcast

SH 702

MASTER CERTIFICATION

Accident Investigation Certificate Program 40 Hours | $995

Contract | $12,500

This is a combination course of the SH 601 and SH 701, and takes participants stepby-step through the entire accident investigation process, as well as how to conduct investigations consistently, and perform root cause analysis. Participants will conduct investigations for multiple simulated incidents/accidents as well as participate in workshops and case studies. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Accident/Incident Investigation.

Apr 6 - 10, 2026

Houston, TX

Apr 13 - 17, 2026

Live Webcast

May 18 - 22, 2026

Arlington, TX

Jul 27 - 31, 2026

Albuquerque, NM

Oct 5 - 9, 2026

Houston, TX

Oct 26 - 30, 2026

Live Webcast

Nov 9 - 13, 2026

Arlington, TX

AVAILABLE BY CONTRACT SH 601

Intermediate Accident Investigation & Photography 24 Hours | Contract: $7,500

SH 701

Advanced Accident Investigation 32 Hours | Contract: $9,000

866-906-9190 | uta.edu/ded/osha

HAZARDOUS MATERIALS COURSES OG 202

HM 241A

Hydrogen Sulfide (H2S) 20 Hours | $650

HAZWOPER Annual Refresher Contract | $8,000

8 Hours | $250

Contract | $4,000

This course provides comprehensive training on the hazards associated with H2S and their required protective measures. Participants will learn the properties and characteristics, respiratory protection requirements, gas detection, emergency response, and current H2S technology. Hands-on exercises and equipment demonstrations are included. The requirements in the ANSI Z390.1, Accepted Practices for Hydrogen Sulfide Training, American Petroleum Institute (API) Recommended Practices, and Federal H2S regulatory standards are also covered. This course is designed for personnel working in the petroleum industry, municipalities, utilities, research and development laboratories, transportation, paper/pulp/food processing, and chemical manufacturing companies. Upon course completion, participants will receive a course completion certificate.

This course is a refresher training course for individuals currently trained as HAZWOPER General Site Workers, First Responder Awareness Level or First Responder Operations Level. This training is required within one (1) year of the initial 40-hour course completion and yearly thereafter. Topics reviewed include hazardous materials and associated risks, HAZMAT recognition and identification, the role of the awareness-level individual, site security and control, and the Emergency Response Guidebook. The course satisfies the annual refresher training requirements of Title 29 CFR Part 1910.120(e&q).

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Hydrogen Sulfide.

Online HAZWOPER General Site Worker (Part I)

Jun 23 - 25, 2026

Live Webcast

Jul 28 - 30, 2026

Arlington, TX

OG 201

Update for Hydrogen Sulfide (H2S) Trainer Course 4 Hours | $250

Contract | $4,000

This update course provides trainers with the skills and knowledge to educate employers and employees on the hazards associated with H2S(Hydrogen Sulfide). It is required once every three (3) years for all personnel teaching H2S classes in accordance with ANSI Z390.1. It provides timely information on hazards, policies, and regulations, with specific emphasis on the ANSI Z390.1 Standard. Prerequisites: ATP 191 Safety & Health Authorized Trainer and OG 202 Hydrogen Sulfide (H2S)

HM 241

HM 241O

Online | $295 This online HAZWOPER course is designed to fulfill the basic training requirements for hazardous waste cleanup workers (CFR 1910.120(e)), and workers involved in emergency response operations or storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste. Topics include safety and health programs, site characterization and analysis, site control, training, medical surveillance, engineering controls, work practices, and PPE, monitoring; site safety and health plans; drums and containers; decontamination; and on-site emergencies. Participants must have additional training to complement this computer-based training.

HM 241H

Onsite HAZWOPER General Site Worker (Part II) 8 Hours | $350

Contract | $6,000

The onsite HAZWOPER course is designed to fulfill the site-specific and hands-on training requirements, as described in OSHA Interpretation Letter dated 11/22/94. This training includes the donning, doffing, and use of specific Personal Protective Equipment (PPE) required as well as site-specific hands-on task training tailored to the participant’s assigned duties.

HAZWOPER General Site Worker 40-Hour 40 Hours | $720

Contract | $10,000

This course is designed to fulfill the training requirements for workers involved in hazardous waste cleanup/remediation at industrial sites, RCRA or Superfund sites, voluntary cleanup operations, and operations involving hazardous wastes listed within Title 29 CFR Part 1910.120(e). Topics include scope, application, and definitions; safety and health programs; site characterization and analysis; site control; training; medical surveillance; engineering controls, work practices, and personal protective equipment; monitoring; site safety and health plans; drums and containers; decontamination; and on-site emergencies.

Mar 16 - 20, 2026

Live Webcast

Mar 30 - Apr 3, 2026

Arlington, TX

Nov 30 - Dec 4, 2026

Live Webcast

NEW! HM 242

HAZWOPER 40-Hour for Healthcare 40 Hours | $720

Contract | $10,000

This course is designed to fulfill the training requirements for workers involved in hazardous waste cleanup at healthcare facilities, voluntary cleanup operations, and operations involving hazardous wastes listed within Title 29 CFR Part 1910.120(e). Topics include scope, application, and definitions; safety and health programs; site characterization and analysis; site control; training; medical surveillance; engineering controls, work practices, and personal protective equipment; monitoring; site safety and health plans; drums and containers; decontamination; and on-site emergencies.

Available online at dedtraining.com

ONLINE TRAINING AT YOUR OWN PACE

OG 201

Update for Hydrogen Sulfide (H2S) Trainer Course

HM 241O

Online HAZWOPER General Site Worker (Part I)

The University of Texas at Arlington | OSHA Education Center

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

HEALTHCARE COURSES SH 202

Trainer Course for Health & Safety Institute (HSI) First Aid and CPR 16 Hours | $530

Contract | $7,500

This course is designed to build essential life-saving skills. Participants will be qualified to train others in Health & Safety Institute (HSI) First Aid/CPR, Automated External Defibrillators (AEDs), disease prevention from Bloodborne Pathogens, and Infant and Child rescue skills and AED applications. Participants will apply these skills in scenariobased practices. Upon course completion, participants will be approved to instruct Health & Safety Institute (HSI) training programs in BasicPlus, CarePlus, Bloodborne Pathogens, Emergency Oxygen, and Child/Infant Supplement. This training can be used for continuing education credits for nursing.

SH 200O

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Healthcare.

OSHA/Joint Commission Healthcare Safety Overview & Crosswalk

Jan 13 - 14, 2026

Arlington, TX

8 Hours

Apr 21 - 22, 2026

Houston, TX

Aug 11 - 12, 2026

Arlington, TX

Oct 20 - 21, 2026

Houston, TX

Nov 17 - 18, 2026

Arlington, TX

This course will prepare participants to evaluate the readiness of a healthcare organization pursuing accreditation by the Joint Commission. Participants crosswalk the OSHA 29 CFR 1910 General Industry Standards and Joint Commission Accreditation Manual Chapters covering Environment of Care (EC), Emergency Management (EM), Life Safety (LS) and Infection Control (IC). In addition, if applicable, references will be made to provisions of the Centers for Medicare Services (CMS) conditions of Participation. Participants investigate the numerous agencies, funding sources, investors and interest groups that contribute to regulatory and compliance requirements. Case studies are used to highlight and direct participant activities and identify areas for further investigation. This course is available for 9.6 Contact Hours of Nursing Continuing Education.

RELATED COURSE TOPICS HM 242

HAZWOPER 40-Hour for Healthcare

OSHA #7200

SEE PAGE 23 FOR SCHEDULE.

Bloodborne Pathogen Exposure Control 7.5 Hours

OSHA #7210

Contract | $4,000

SEE PAGE 23 FOR SCHEDULE.

Pandemic Illness Preparedness 7.5 Hours

OSHA #7230

Contract | $4,000

SEE PAGE 23 FOR SCHEDULE.

Infectious Disease Preparedness in the Workplace 7.5 Hours

Contract | $4,000

Online | $150

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Healthcare.

SH 201O

Trainer Course for Healthcare Employee Safety & Health 16 Hours

Online | $150

This course is designed for healthcare professionals who plan to present safety and health content to their employees and colleagues. The program covers topics specific to making safety and health training engaging, relevant, and impactful for all healthcare workers. In addition to the content, the participants will receive a Trainer’s Tool Kit with a variety of resources and training materials. This course satisfies the training prerequisite for the Authorized Trainer Program designation in Healthcare.

LIFE SAFETY/FIRE SAFETY COURSES LS 101

FS 201

Life Safety Code Concept 32 Hours | $750

Applied Fire Safety, Protection, and Analysis (NFPA 101) Contract | $10,000

20 Hours | $650

Contract | $8,500

This course provides training and application of the concepts of NFPA 101 Life Safety Code requirements that protect people, property, and equipment. The course covers a host of topics related to reducing the spread of fire in buildings and providing a means of safe egress from buildings. Case studies and exercises will be used to convey the concepts supporting the code and its relationship to OSHA and Building Code requirements. Participants will receive a copy of the NFPA 101 Life Safety Code.

This course examines fire safety in building design, occupancy, and maintenance while exploring the issues of the safety of facilities from a life and fire safety and fire code compliance standpoint. The course will cover the NFPA 101 Life Safety Code and discuss the interrelation of construction, built-in fire protection, occupancy, and building maintenance. Participants will explore the issues of adopted codes versus referenced standards and face problems in code compliance with more than one applicable code.

This course satisfies the training prerequisite for the Authorized Trainer Program designation in Fire & Safety.

Apr 28 - May 1, 2026

Live Webcast

Feb 24 - 26, 2026

Live Webcast

Nov 3 - 6, 2026

Live Webcast

Nov 17 - 19, 2026

Live Webcast

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

866-906-9190 | uta.edu/ded/osha

OSHA TRAINING FOR YOUR TEAM

We bring training to you

Average Open Enrollment Cost: (One (1) Participant)

ON-SITE | LIVE | VIRTUAL

Tuition............................................ $650 Hotel............................................... $750 Meals............................................... $320 Airfare............................................. $350 Transportation............................. $200

COST/EMPLOYEE ��$2,270

Contract Class Cost: (Up to 20 Participants)

Unless otherwise indicated, contract pricing throughout this publication reflects a class size of up to 20 participants and includes all instructor fees and course materials.

AVAILABLE BY CONTRACT

COST/EMPLOYEE ��$450

SH 690

MASTER CERTIFICATION

Legal Aspects of Safety

CPT 102

8 Hours

Excavation Safety for the Competent Person 24 Hours

Tuition.........................................$9,000 Hotel....................................................$0 Meals....................................................$0 Airfare..................................................$0

Contract | $8,500

This 3-day course is designed for personnel who may be designated as the Competent Person by their employer for typical construction-related trenching and excavation activities. It is also recommended for any construction, maintenance, or supervisory personnel involved with trenching and excavation operations or who will be responsible for safety at their job sites where excavation hazards exist. Topics include: hazard recognition, evaluation, and control; construction exposures and applications; trenching and excavation regulations and requirements; soil classification; eliminating and controlling excavation hazards to include conducting hazard surveys and inspections; selection of suitable worker protection systems; pre-engineered and engineered systems; access and egress; and incident investigations. Training includes active participation with hands-on activities and demonstrations.

Contract | $4,000

Beginning with an overview of the basic legal structure and concepts, the course looks at where safety and health professionals may be involved in potential litigation and reviews OSH Act describing factors that created the framework for this regulatory mandate.

HM 100

Hazardous Communications (GHS) 8 Hours

Contract | $4,000

This course provides training on OSHA’s Hazard Communication Standard (29 CFR 1910.1200) also known as HazCom and the Globally Harmonized System for Hazard Communication (GHS).

Competent Person CPT 101 Fall Protection for the Competent Person

24 Hours | $8,500

CPT 102 Excavation Safety for the Competent Person

24 Hours | $8,500

CPT 103 Scaffolding Safety for the Competent Person

24 Hours | $8,500

CPT 104 Confined Space Entry for the Competent Person

24 Hours | $8,500

CPT 105 Qualified Rigger/Signalperson

24 Hours | $8,500

CPT 106 Silica for the Competent Person

24 Hours | $8,500

CPT 201 Fall Protection for the Competent Person Update Training

8 Hours | $4,000

These 3-day courses are designed for personnel who may be designated as the Competent Person by their employer. They incorporate specific ANSI standards, US Army Corps of Engineer EM 385-1-1 requirements, and other consensus standards in addition to the OSHA requirements. They include active participation, with hands-on activities and demonstrations.

The University of Texas at Arlington | OSHA Education Center

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

WE OFFER THE TRAINING YOU NEED

CONTRACT TRAINING

SAFETY & HEALTH OSHA #6005 Collateral Duty Course for Other Federal Agencies

30 Hours | $8,500

OSHA #6015 Occupational Safety and Health Course for Other Federal Agencies

60 Hours | $16,500

SH 10C OSHA 10-Hour Outreach for Construction

10 Hours | $3,500

SH 10G OSHA 10-Hour Outreach for General Industry

10 Hours | $3,500

SH 10M OSHA 10-Hour Outreach for Maritime Marine Terminal

10 Hours | $3,500

SH 15DR Disaster Site Worker

15 Hours | $5,000

SH 30C OSHA 30-Hour Outreach for Construction

30 Hours | $6,500

SH 30G OSHA 30-Hour Outreach for General Industry

30 Hours | $6,500

SH 30M OSHA 30-Hour Outreach for Maritime

30 Hours | $6,500

SH 261 Safety & Health Leadership

37.5 Hours | $10,000

SH 262 Joint Health & Safety Committee Training

16 Hours | $6,000

SH 320 Electric Arc Flash and NFPA 70-E Awareness Training

8 Hours | $4,000

SH 321 NFPA 70E Electrical Safety in the Workplace

16 Hours | $6,000

SH 370 Hot Work

8 Hours | $4,000

SH 380 Motor Vehicle and Transportation Safety

24 Hours | $7,500

SH 385 EM 385-1-1 US Army Corps of Engineer Construction Requirements*

40 Hours | $10,000

SH 400 Front-Line Construction Supervisor Safety Training

24 Hours | $7,500

SH 500 Principles of Industrial Ventilation

24 Hours | $10,000

SH 520 Industrial Hygiene Techniques

24 Hours | $8,000

SH 522 Industrial Hygiene Sampling Techniques for Silica

16 Hours | $5,700

SH 610 Safety in the Tactical/Operational Environment

24 Hours | $8,000

SH 630 Safety Training and Education Strategies

8 Hours | $4,000

SH 640 Occupational Health Issues

8 Hours | $4,000

SH 650 Radiological Health and Safety Fundamentals

16 Hours | $5,500

SH 660 Psychology of Accident Prevention

8 Hours | $3,500

SH 670 Principles of Ergonomics

24 Hours | $8,000

SH 680 Safety and Health Program Management (Full Course)

24 Hours | $5,500

SH 684 Safety and Health Committees & Councils

4 Hours | $3,500

SH 688 Energy-Based Safety

16 Hour | $ 7,500

SH 690 Legal Aspects of Occupational Safety and Health

8 Hours | $4,000

SH 710 Blueprint Reading and Interpretation

8 Hours | $4,000

SH 770 Quantitative Methods in Safety and Health Management (Metrics)

8 Hours | $4,000

SH 780 Accident Reporting, Investigation, and Analysis

24 Hours | $8,000

SH 785 Root Cause Analysis

16 Hours | $7,500

SH 790 Lean Fundamentals for Safety: Hierarchy of Controls, 5S

36 Hours | $10,000

SH 800 Applying Human Dynamics for Injury Prevention

32 Hours | $11,000

SH 820 Safety & Health Culture

8 Hours | $5,000

SH 823 Emerging Issues in Safety & Health

8 Hours | $3,000

SH 830 EHS for the Energy Industry

25 Hours | $6,250

SH 925 Management of Change

20 Hours | $7,500

SH 926 Configuration Change Management

20 Hours | $7,500

* Available with OSHA 30-Hour for Construction Industry The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

866-906-9190 | uta.edu/ded/osha

The University of Texas at Arlington | OSHA Education Center

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

WE OFFER THE TRAINING YOU NEED

ONLINE TRAINING

PROFESSIONAL CERTIFICATE IN OCCUPATIONAL SAFETY AND HEALTH (PCOSH) FS 201O Applied Fire Safety, Protection, and Analysis

20 Hours | $495

RM 730O Operational Risk Management and Job Hazard Analysis (JHA)

24 Hours | $395

SE 620O System Safety and Analysis

16 Hours | $395

SH 380O Motor Vehicle and Transportation Safety

24 Hours | $395

SH 610O Safety in the Tactical/Operational Environment

24 Hours | $495

SH 620O Aviation Safety Management

4 Hours | $150

SH 630O Safety Training and Education Strategies

8 Hours | $200

SH 650O Radiological Health and Safety Fundamentals

16 Hours | $350

SH 670O Principles of Ergonomics

24 Hours | $495

SH 680O Safety and Health Program Management (Full Course)

24 Hours | $350

SH 681O Safety and Health Program Management (Part 1)

8 Hours | $200

SH 682O Safety and Health Program Management (Part 2)

8 Hours | $200

SH 691O Research Methods and Special Projects

8 Hours | $200

SH 710O Blueprint Reading and Interpretation

8 Hours | $200

SH 780O Accident Reporting, Investigation, and Analysis

32 Hours | $495

SAFETY & HEALTH HM 100O Hazardous Communications (GHS)

8 Hours | $200

RM 750O Risk Communication - What Are You Really Saying?

8 Hours | $200

SH 105O Job Hazard Analysis/Job Safety Analysis

8 Hours | $200

SH 110O Office Safety

4 Hours | $150

SH 200O OSHA/Joint Commission Healthcare Safety Overview and Crosswalk

8 Hours | $200

SH 201O Trainer Course for Healthcare Employee Safety and Health

16 Hours | $350

SH 211O Overview of OSHA’s Silica Standard

4 Hours | $150

SH 370O Hot Work

8 Hours | $200

SH 640O Occupational Health Issues

8 Hours | $200

SH 660O Psychology of Accident Prevention

8 Hours | $200

SH 690O Legal Aspects of Occupational Safety and Health

8 Hours | $200

SH 720O Bloodborne Pathogens

8 Hours | $200

SH 740O Critical Thinking and Analysis (Problem Solving)

8 Hours | $200

SH 770O Quantitative Methods in Safety and Health Management (Metrics)

8 Hours | $200

RM 785O Root Cause Analysis

16 Hours | $200

HAZWOPER HM 241O HAZWOPER General Site Worker 32 Hour

32 Hours | $295

HM 241A HAZWOPER Annual Refresher

8 Hours | $200

UPDATE TRAINING ATP 190O Update for Safety and Health Authorized Trainers

8 Hours | $145

CPT 201O Fall Protection for the Competent Person Update Training

8 Hours | $200

OG 201O Update for H2S (Hydrogen Sulfide) Trainer Course

7.5 Hours | $200

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

866-906-9190 | uta.edu/ded/osha

CONTRACT TRAINING DISASTER RESPONSE DR 560 ICS/NIMS for the Disaster Response Supervisor & Professional

24 Hours | $8,500

DR 660 Incident Management Training

32 Hours | $9,500

SH 15DR Disaster Site Worker

15 Hours | $5,000

Don’t wait until after the disaster to train your team! These courses are designed to prepare your organization to respond to a disaster in an effective and coordinated approach. Realistic disaster scenarios are used to prepare your organization to take control and minimize the effects on your operations.

HAZMAT HM 100 Hazardous Communications (GHS)

8 Hours | $4,000

HM 241 HAZWOPER General Site Worker 40-Hour

40 Hours | $10,000

HM 241A HAZWOPER Annual Refresher

8 Hours | $4,000

HM 241H Onsite HAZWOPER General Site Worker (Part II)

8 Hours | $6,000

HM 242 HAZWOPER 40-Hour for Hospitals

40 Hours | $10,000

HM 243 HAZWOPER Site Supervisor

8 Hours | $4,000

HM 244 HAZWOPER First Responder Awareness Level

8 Hours | $4,000

HM 244A HAZWOPER First Responder Awareness Level Annual Refresher

8 Hours | $4,000

HM 245 HAZWOPER First Responder Operations Level

24 Hours | $8,000

HM 246 HAZWOPER Hazardous Materials Technician

24 Hours | $8,000

HM 247 HAZWOPER 24-Hour

24 Hours | $8,000

HM 248 HAZWOPER Hazardous Materials Specialist

24 Hours | $8,000

HM 250 HAZ Command

16 Hours | $6,000

RISK MANAGEMENT RM 101 Safety, Health, and Environmental Risk Management (SHERM) Principles

32 Hours | $9,000

RM 201 Assessment Techniques

24 Hours | $10,000

RM 202 Performance Measurement and Data Analysis

36 Hours | $10,000

RM 203 Risk Informed Decision Making

24 Hours | $10,000

RM 730 Operational Risk Management and Job Hazard Analysis (JHA)

24 Hours | $8,500

RM 740 Critical Thinking and Analysis

8 Hours | $4,000

RM 750 Risk Communication

8 Hours | $4,000

RM 785 Root Cause Analysis

16 Hours | $7,500

SYSTEM SAFETY ENGINEERING SE 620 System Safety and Analysis

24 Hours | $8,000

FACEBOOK

The University of Texas at Arlington | OSHA Education Center

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

SYSTEM SAFETY COURSES SE 101

SE 302

System Safety and Analysis for Engineers 32 Hours

Software System Safety Contract | $10,000

32 Hours

Contract | $11,500

Application of engineering and management principles, criteria, and techniques to optimize safety within the constraints of operational effectiveness, time, and cost throughout all phases of the life cycle of a system or facility. Accident prevention, beginning with systems engineering together with sound management, are combined in this course to enable the student to fully comprehend their vital roles in preventing accidents. The total system lifecycle process, from system design concepts, technology development, system development and demonstration, production and deployment, and operation support, through testing, maintenance/systems management and operational employment are fully examined and evaluated.

This course addresses the growing role of safety-critical software in complex systems. Participants gain essential skills for designing and evaluating such software to prevent accidents. The curriculum covers hazard identification, risk management, and applies these practices across the system’s lifecycle. It offers tailored software safety requirements, tools, and techniques applicable to system safety engineers and project management personnel overseeing safety-critical designs. The course incorporates real-world case studies and lessons learned in system safety engineering.

SE 201

Facility System Safety

32 Hours

This courses uses a system safety engineering approach to manage safety and occupational health of a facility during its life cycle by examining deficiencies in facility design/acquisition, facility modification, associated testing, and operational sequences, which can result in acceptance of risk. It provides information and guidance for the development of a facility safety program during the acquisition process and to ensure integration of safety within the facility acquisition process.

Hazard & Accident Analysis Techniques for System Safety Contract | $10,000

This course introduces system safety engineering methods, emphasizing practical application. Topics include FMEA/FMECA, fault tree analysis, event tree analysis, hazard analysis, and probability models for risk prediction. Participants gain an understanding of hazard effects, engineering models, and mathematical tools to assess hazardous conditions. The course equips students to use safety engineering analysis for accident probability assessment.

SE 202

24 Hours

Contract | $8,000

SE 304

Ammunition & Explosives Hazard Classification

Fuze Safety and Ignition Systems 8 Hours

SE 303

Contract | $4,000

16 Hours

Contract | $7,500

This course covers the Department of Defense (DoD) requirements for the safe design of fuzes, munition ignition systems, and associated ignition safety devices used to arm and fire munition and propulsion systems. Fuze and ignition safety standards are explained along with the safety review process to include the applicable regulations and artifacts required for approval.

This course covers the ammunition and explosives hazard classification procedures for transportation and storage by the Department of Defense Components. Participants will review the procedures for assessing the potential reaction of ammunition and explosives to specified phenomenon. Based on the reactions, you will be able to assign the Class and Hazard Division using the procedures in Technical Bulletin 700-2 for these items for transportation and storage.

SE 203

SE 306

Insensitive Munitions 8 Hours

Hazards of Electromagnetic Radiation to Ordnance (HERO) Contract | $4,000

The course reviews the Insensitive Munitions Program and covers the current policy and guidance, the development process and the safety implications. A review of technology solutions and developments, preparation of a Threat Hazard Assessment, guidance on complying with the safety requirements for qualification and final type qualification, and guidance for complying with testing and analysis requirements to include evaluation of the results to assess a munition’s compliance with Insensitive Munitions Program criteria.

SE 301

Advanced System Safety Engineering 32 Hours

Contract | $10,500

16 Hours

Contract | $7,500

This course covers the potential risks and safety measures associated with electromagnetic radiation in ordnance environments. Participants will gain insight into the HERO principles and regulations providing them with the knowledge to mitigate potential hazards. This course will cover the principles, regulations, and risk mitigation strategies on electromagnetic radiation as it relates to ordnance. Participants will learn to identify electromagnetic radiation hazards, conduct risk assessments, and leverage technology to protect ordnance. The course provides insight into the international and national compliance standards to be able to select and implement best safety practices. Case studies will be used to provide a practical understanding of the hazards and safety measures for protecting ordnance in electromagnetic radiation environments.

This advanced course in system safety focuses on enhancing the skills and knowledge of safety engineers in managing U.S. Army acquisition system safety programs. Participants will learn to effectively identify and control hazards, quantify and manage risks, and oversee safety throughout the system’s life cycle. The course revisits engineering and management principles, criteria, and techniques introduced in the SE 101 System Safety and Analysis for Engineers and SE 201 Hazard & Accident Analysis Techniques for Safety Engineers courses, with a deeper focus on their practical application. Key topics include tasks, program relationships, and interactions essential for a successful system safety program. Emphasis is on life-cycle safety management activities, from program initiation through operations, sustainment, and end-of-life, highlighting critical elements for achieving materiel release safety.

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

866-906-9190 | uta.edu/ded/osha

AIR | WATER | WASTE | MANAGEMENT | COMPLIANCE

ENVIRONMENTAL TRAINING INSTITUTE FOCUSED AREAS OF TRAINING AIR

WATER

WASTE

SCIENCE

Empowering environmental professionals with trusted, expert-led training to build a safer, more sustainable future.

ADVANCE YOUR CAREER WITH INDUSTRY-RECOGNIZED CERTIFICATIONS UTA’s Extension and Extended Campus offers a comprehensive selection of certifications and certificate programs designed to help you stay ahead in a rapidly evolving industry. Earn a credential that demonstrates your expertise and commitment to excellence. Choose from seven certifications in key environmental areas - air, water, waste, and environmental management - and take the next step in your professional journey.

VIEW ETI COURSE OFFERINGS & PROGRAMS

ETI Can Help You:

Exceed environmental regulations

Advance your career

Achieve sustainability goals

Become a Certified

Avoid non-compliance fines

EPA Outreach Trainer

The courses listed onutaeti this page are not affiliated with, approved by, @uta_ETI UTArlingtonETI CONTACT US 866.906.9190 | eti@uta.edu | uta.edu/ded/eti 38 REGISTER TODAY 866-906-9190 | eti@uta.edu | uta.edu/ded/eti or endorsed by the U.S. Department of Labor or OSHA.

ENVIRONMENTAL TRAINING INSTITUTE Our Mission | At The University of Texas at Arlington’s Environmental Training Institute (ETI), we are committed

to preparing a skilled, compliant workforce that excels in their careers while protecting human health and the environment. As the industry grows and changes, we grow alongside it, adapting to meet new challenges.

We invite you to explore our programs and discover the perfect course to support your environmental career journey. Visit our website or reach out to us directly, we’re always eager to help you achieve your goals.

Call us: 866.906.9190 | Email us: eti@uta.edu | Visit our Website: uta.edu/ded/eti ETI 101

AIR 201

32 Hours | $895

24 Hours | $750

This course presents a full overview of EPA environmental regulations and addresses elements of the major environmental programs at the state level. Activities and case studies will be used throughout the course in order for participants to apply the material presented. This course is also available online, at your own pace at dedtraining.com

Provides an overview of the Clean Air Act requirements, including the New Source Review process and Title V permitting. Participants are presented with solutions to manage hazardous air pollutants and criterion pollutants. This course is also available online, at your own pace at dedtraining.com

Feb 10 - 13, 2026

Live Webcast

Jan 14 - 15, 2026

Arlington, TX

Mar 17 - 20, 2026

Arlington, TX

Jan 14 - 15, 2026

Live Webcast

Apr 14 - 17, 2026

Live Webcast

Mar 31 - Apr 1, 2026

Arlington, TX

May 19 - 22, 2026

Live Webcast

Mar 31 - Apr 1, 2026

Live Webcast

Jun 23 - 26, 2026

Arlington, TX

Jun 10 - 11, 2026

Arlington, TX

Jul 21 - 24, 2026

Live Webcast

Jun 10 - 11, 2026

Live Webcast

Aug 11 - 14, 2026

Arlington, TX

Jul 15 - 16, 2026

Live Webcast

Sep 15 - 18, 2026

Live Webcast

Aug 5 - 6, 2026

Arlington, TX

Oct 20 - 23, 2026

Arlington, TX

Oct 29 - 30, 2026

Live Webcast

Nov 17 - 20, 2026

Live Webcast

Dec 8 - 11, 2026

Arlington, TX

Nov 17 - 18, 2026

Arlington, TX

Dec 9 - 10, 2026

Live Webcast

Dec 15 - 16, 2026

Arlington, TX

Introduction to Environmental Compliance

Fundamentals of the Clean Air Act

CELEBRATE WITH US

Earth Day - April 22 Protecting People, Planet, and the Workplace

Join the University of Texas at Arlington Environmental Training Institute (ETI) in celebrating Earth Day by committing to safer, cleaner, and a more sustainable workplace. Every action we take—reducing waste, managing hazardous materials responsibly, conserving energy, and protecting our workers—contributes to a healthier planet.

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

ENVIRONMENTAL TRAINING INSTITUTE

ENVIRONMENTAL TRAINING INSTITUTE WST 401

MGE 801

32 Hours | $895

32 Hours | $995

Participants learn about the federal Resource Conservation and Recovery Act (RCRA), and federal, state, and local agencies and their requirements. Participants will be presented with the basics of managing non-hazardous waste, permitting processes, common violations, and waste minimization. This course is also available online, at your own pace at dedtraining.com

This course specifies general requirements and guidelines of the ISO 14001:2015 Environmental Management System (EMS) standard. A fully implemented EMS will provide reasonable assurance of minimal negative environmental impact, improved environmental performance, and sustainable growth.

Feb 17 - 20, 2026

Arlington, TX

Apr 7 - 10, 2026

Arlington, TX

Apr 28 - 30, 2026

Live Webcast

May 19 - 22, 2026

Live Webcast

Jun 2 - 5, 2026

Arlington, TX

Jun 2 - 5, 2026

Live Webcast

Aug 25 - 28, 2026

Live Webcast

Jun 15 - 18, 2026

Arlington, TX

Oct 13 - 16, 2026

Arlington, TX

Aug 11 - 14, 2026

Houston, TX

Sep 8 - 11, 2026

Arlington, TX

Oct 27 - 30, 2026

Live Webcast

Resource Conservation and Recovery Act

Environmental Management Systems (ISO 14001:2015)

WTR 301

Introduction to Water and Wastewater Regulations 24 Hours | $795 Introduction to compliance with water and wastewater regulations, and how those regulations impact your organization. Discussion topics include National Pollutant Discharge Elimination System permit types for storm water, industrial wastewater, domestic wastewater, and pretreatment. This course is also available online, at your own pace at dedtraining.com

MGE 810

Environmental Audits 24 Hours | $895 An in-depth look at environmental compliance auditing in all types of organizations in accordance with demonstrated industry techniques and standards of practice. Completion of this course will help improve compliance status, control risks, support environmental management systems, and identify opportunities for pollution prevention. This course is also available online, at your own pace at dedtraining.com

Jan 20 - 22, 2026

Arlington, TX

Feb 10 - 12, 2026

Live Webcast

Apr 14 - 16, 2026

Arlington, TX

Feb 24 - 26, 2026

Arlington, TX

Jun 2 - 4, 2026

Live Webcast

Mar 25 - 27, 2026

Live Webcast

Jul 7 - 9, 2026

Arlington, TX

Apr 14 - 16, 2026

Arlington, TX

Sep 15 - 17, 2026

Live Webcast

May 29 - 31, 2026

Live Webcast

Jun 9 - 11, 2026

Live Webcast

Jul 14 - 16, 2026

Arlington, TX

Sep 15 - 17, 2026

Houston, TX

Oct 27 - 29, 2026

Live Webcast

WTR 302

Stormwater Pollution Prevention Plans (SWPPP) 16 Hours | $650 This course covers the fundamental requirements of a storm water pollution prevention plan. Topics for this course include how to identify a facility’s potential sources of pollution, discharge, or contamination, and methods to prevent and control storm water pollution through the implementation of best management practices (BMPs). Participants will gain an understanding of erosion and sedimentation challenges, as well methods to monitor and evaluate the effectiveness of SWPPPs. This course is also available online, at your own pace at dedtraining.com

Feb 3 - 4, 2026

Live Webcast

Mar 24 - 25, 2026

Arlington, TX

Jul 1 - 2, 2026

Live Webcast

Sep 15 - 16, 2026

Houston, TX

MGE 817

Pollution Prevention Tools for Sustainability Goals 16 Hours | $375 One of the most important strategies for achieving sustainability is to make modifications to the processes, product, or management of the product to reduce the generation of pollution, a.k.a. non-product output. In this course you will learn emerging trends in prevention and how they relate to modern management and reporting techniques. This course is ideal for someone seeking to lower operating costs, minimize risk and open new lines of profitability.

Jun 22 - 23, 2026

Live Webcast

Dec 3 - 4, 2026

Live Webcast

Courses are Available Self-paced, as Live Webcasts, and In-person. NOT SURE WHERE TO START? Contact a program expert today! Lilliana Cervantes | ETI Program Manager E eti@uta.edu P 817.272.5411 W uta.edu/ded/eti

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

ENVIRONMENTAL TRAINING INSTITUTE Why Choose ETI at UTA?

EXPERT INSTRUCTORS Learn from experienced professionals with real-world expertise in environmental regulations and compliance.

COMPREHENSIVE CURRICULUM Our programs cover a wide range of topics, ensuring a holistic understanding of environmental management.

RECOGNIZED CREDENTIALS Enhance your professional credibility with certifications recognized across various industries.

CUSTOMIZED TRAINING SOLUTIONS We offer tailored training programs to meet the unique needs of your organization.

COMMITMENT TO SUSTAINABILITY Our courses emphasize sustainable practices, aligning with global environmental goals.

Industries We Serve ENERGY AND UTILITIES

MANUFACTURING

CONSTRUCTION

ENVIRONMENTAL CONSULTING

GOVERNMENT AGENCIES

WASTE MANAGEMENT

Take the Next Step in Your Environmental Career Invest in your professional development and contribute to a more sustainable future. Explore our courses and certifications to find the right fit for your career goals.

Empower yourself with the knowledge and skills to lead in environmental compliance and sustainability.

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

REGISTE TODAY

ENVIRONMENTAL TRAINING INSTITUTE

TRANSPORTATION TRAINING

P: 866.906.9190 | E: pwi@uta.edu | W: uta.edu/ded/pwi

Upcoming PWI Courses and Workshops Management Series This series of courses are designed for current and aspiring managers, supervisors, and team leaders seeking to enhance their leadership capabilities and foster a more productive and harmonious work environment. From foundational supervision to advanced strategic management, participants will gain practical skills and proven strategies to navigate the complexities of today’s workplace. MANAGING CONFLICT IN THE WORKPLACE | $445

Jan 27, 2026

Houston, TX Houston, TX

DEVELOPING EMPLOYEE PERFORMANCE PLANS & CONDUCTING EMPLOYEE EVALUATIONS | $445

Feb 24, 2026

Houston, TX

ADVANCED MANAGEMENT SKILLS | $995

Feb 25 - 26, 2026

Houston, TX

Qualified Flagger: Training & Trainer | $415 This course is designed to prepare contractor representatives to present the 4-hour Flagger Training course to employees wishing to become qualified flaggers. In addition to basic training in fundamental concepts of work zone traffic control and flagging, adult training techniques will be presented, discussed, and demonstrated. Individuals interested in receiving training or training others as an escort flagger in accordance with Texas law and Chapter 22 of the Basic Peace Officer Course can take this class to meet the new regulatory obligations. Certification good for 4 years.

Jan 20, 2026

Houston, TX

Feb 24, 2026

San Antonio, TX

Mar 24, 2026

Austin, TX

Parker County, TX

Subsurface Utility Locating & Marking Workshop | $495 This information packed training addresses both the art and science behind underground utility line locating and marking, as well as, state laws, standards, and regulations. The course provides a balanced mixture of classroom training combined with handson field instruction performed outdoors. Participants gain an A-Z understanding of the fundamentals of line locating. Special emphasis is placed on mastery of the electronic detection equipment and troubleshooting techniques to solve utility locating puzzles.

Feb 12, 2026

Parker County, TX

Advanced Road Inspector Program This series of workshops are designed to enhance the participants’ abilities to thoroughly assess and evaluate highway construction projects. This goes beyond basic inspection tasks, pushing participants to understand more complex concepts and techniques that are critical to ensuring highway infrastructure is built to the highest standards of safety, quality, and compliance with regulations. WORKSHOPS ADVANCED INSPECTION SKILLS | $1295

Jan 13 - 15, 2026

Traffic Control Supervisor | $475 This 16-hour course is geared to those who supervise traffic control technicians and other personnel in roadway work zones and is intended to familiarize supervisors with procedures used to make decisions regarding work zone traffic control. Course meets TxDOT Special Provision to Item 7 standard for Contractor Responsible Person and Alternate. Certification good for 4 years.

INSPECTING ASPHALT SURFACE TREATMENTS & HOT-MIX | $845

Jan 22 - 23, 2026

Houston, TX

Feb 25 - 26, 2026

San Antonio, TX

Mar 25 - 26, 2026

Parker County, TX

San Antonio, TX

INSPECTING SOILS, FLEX BASE, & SUBGRADES | $495

Feb 10, 2026

Need more information? CONTACT US TODAY!

This training is designed for gathering, transmission and distribution pipeline system employees responsible for, design, construction, maintenance and construction of the pipeline system. This is a customized training event designed to address pipeline specific issues, locating challenges and best practices for damage prevention. Round table discussions are part of this well received course. Accurate locating techniques and safe excavation practices are the premises for this training. Recommended for students who are experienced pipeline employees.

Feb 11, 2026

BASIC SUPERVISION & MANAGEMENT SKILLS | $695

Jan 28 - 29, 2026

Pipeline Locating, Marking & Damage Prevention Training | $495

San Antonio, TX

Feb 11 - 12, 2026

San Antonio, TX

INSPECTING BRIDGES & CONCRETE PAVEMENT | $1195

Mar 17 - 19, 2026

San Antonio, TX

INSPECTING DRAINAGE, EXCAVATION, & BACKFILLING | $495

Apr 14, 2026

San Antonio, TX

INSPECTING PERMANENT SAFETY DEVICES | $855

April 15 - 16, 2026

San Antonio, TX

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

TRANSPORTATION TRAINING

Advance Your Career with Industry Certifications Explore certification paths available through UTA’s Public Works Institute. ADVANCED ROAD INSPECTOR Participants who have taken all six of the Advanced Road Inspector Workshops are eligible to pursue the ARI Certification. NEXT STEPS:

Pass the Advanced Road Inspector Certification Exam

Take the TXAPA Level 1B HMA Roadway Specialist Training & Certification (or similar)

Take the ASTM International Field Concrete Training (or similar)

Take a Storm Water Pollution Prevention Plan Training (or similar)

Take a Temporary Traffic Control Training

AIRPORT SHORT COURSE SERIES

Participants who complete four classes from the Airport Short Course Series are eligible to pursue the Airport Infrastructure and Operations Specialist Certification.

• Airport Pavement • Airport Planning

• Airport Engineering & Management • Airport Design - Airside

• Airport Design Landside • Airport Operations

TRAFFIC CONTROL LEAD

Geared to those who supervise traffic control technicians and other personnel in roadway work zones and is intended to familiarize supervisors with procedures used to make decisions regarding work zone traffic control. REQUIRED (2):

• Traffic Control Supervisor • Qualified Flagger: Training & Trainer

PICK ONE (1):

• Basic Supervision and Management Skills OR • Managing Conflict in the Workplace

PLUS ONE OTHER (1):

• Installation and Maintenance of Signs and

+ Pavement Markings

• Work Zone Construction Site Safety (OSHA-10) • Traffic Management for First Responders

COMING SOON!

The Certified Workplace Leadership and Management Specialist Certification is designed for professionals seeking to enhance their leadership capabilities and master essential management practices in the workplace. This comprehensive certification is awarded upon successful completion of four targeted courses that build a strong foundation in supervision, performance management, conflict resolution, and advanced leadership strategies. Managing Conflict in the Workplace

Basic Supervision & Management Skills

Developing Employee Performance Plans & Conducting Employee Performance Evaluations

The courses listed on this page are not affiliated with, approved by, or endorsed by the U.S. Department of Labor or OSHA.

Advanced + Management Skills

PUBLIC WORKS INSTITUTE

EVENING CLASSES

Unlock Your Potential with Evening Classes Busy during the day? Don’t let your schedule hold you back. Our evening classes offer flexible scheduling, expert instruction, and the opportunity to advance your career—on your terms.

Real Goals. Real Results. Real Life.

Your time is valuable—and your future is worth investing in. Join a community of motivated learners who are making it happen every evening.

OSHA #7505

Evening

Jan 5 - 6, 2026

OSHA #7005

Evening

Jul 14 - 15, 2026

OSHA #510

Evening

Jan 13 - 23, 2026

OSHA #7115

en Español

Jul 20 - 21, 2026

OSHA #511

Evening

Jan 26 - Feb 5, 2026

OSHA #7225

Evening

Jul 27 - 28, 2026

OSHA #500

Evening

Feb 9 - 19, 2026

OSHA #3095

Evening

Aug 3 - 13, 2026

OSHA #2055

Evening

Feb 24 - Mar 5, 2026

OSHA #3115

Evening

Aug 18 - 27, 2026

OSHA #521

Evening

Mar 9 - 19, 2026

OSHA #2455

Evening

Sep 1 - 11, 2026

OSHA #2255

Evening

Mar 24 - Apr 2, 2026

OSHA #7120

Evening

Sep 14 - 15, 2026

OSHA #2045

Evening

Apr 6 - 16, 2026

RM 101

Evening

Sep 28 - Oct 8, 2026

OSHA #7230

Evening

Apr 20 - 21, 2026

OSHA #7000

Evening

Oct 12 - 13, 2026

OSHA #3015

Evening

May 5 - 15, 2026

OSHA #2264

Evening

Oct 20 - 29, 2026

OSHA #2015

Evening

May 19 - 29, 2026

OSHA #2225

Evening

Nov 9 - 19, 2026

OSHA #7115

Evening

Jun 1 - 2, 2026

OSHA #7200

Evening

Nov 30 - Dec 1, 2026

OSHA #7845

Evening

Jun 9, 2026

OSHA #7105

Evening

Dec 7, 2026

ATP 191

Evening

Jun 15 - 25, 2026

OSHA #7410

Evening

Dec 14 - 15, 2026

SPACE IS LIMITED | REGISTER TODAY 866.906.9190 | osha@uta.edu | uta.edu/ded/osha

Start your next chapter—enroll in an evening class today!

The University of Texas at Arlington | OSHA Education Center

COURSES BY LOCATION TEXAS Arlington, TX OSHA #3115

Jan 6 - 8, 2026

OSHA #510

Jan 6 - 9, 2026

RM 101

Jan 6 - 9, 2026

OSHA #502

Jan 12 - 14, 2026

OSHA #3085

Jan 13 - 15, 2026

SH 202

Jan 13 - 14, 2026

OSHA #503

Jan 14 - 16, 2026

OSHA #500

Jan 20 - 23, 2026

OSHA #501

Jan 20 - 23, 2026

OSHA #511

Jan 20 - 23, 2026

OSHA #3015

Jan 27 - 29, 2026

OSHA #521

Jan 27 - 30, 2026

OSHA #2045

Feb 3 - 6, 2026

OSHA #3095

Feb 3 - 6, 2026

OSHA #510

Feb 3 - 6, 2026

OSHA #500

Feb 10 - 13, 2026

OSHA #511

Feb 10 - 13, 2026

OSHA #2455

Feb 17 - 19, 2026

OSHA #502

Feb 23 - 25, 2026

OSHA #2225

Feb 24 - 27, 2026

OSHA #503

Feb 25 - 27, 2026

OSHA #2255

Mar 3 - 5, 2026

OSHA #2264

Mar 3 - 5, 2026

OSHA #510

Mar 3 - 6, 2026

ATP 191

Mar 10 - 13, 2026

OSHA #500

Mar 10 - 13, 2026

OSHA #511

Mar 10 - 13, 2026

OSHA #3085

Mar 17 - 19, 2026

OSHA #3115

Mar 17 - 19, 2026

OSHA #3095

Mar 24 - 27, 2026

OSHA #501

Mar 24 - 27, 2026

HM 241

Mar 30 - Apr 3, 2026

OSHA #2455

Mar 31 - Apr 2, 2026

OSHA #510

Mar 31 - Apr 3, 2026

MS 901

Apr 6 - Jun 11, 2026

OSHA #502

Apr 6 - 8, 2026

OSHA #511

Apr 7 - 10, 2026

OSHA #503

Apr 8 - 10, 2026

OSHA #3365

Apr 14 - 17, 2026

OSHA #500

Apr 14 - 17, 2026

OSHA #3015

Apr 21 - 23, 2026

OSHA #521

Apr 21 - 24, 2026

OSHA #7300

Apr 27, 2026

OSHA #510

Apr 28 - May 1, 2026

OSHA #511

Apr 28 - May 1, 2026

OSHA #7405

May 4, 2026

OSHA #3085

May 5 - 7, 2026

OSHA #500

May 5 - 8, 2026

MS 901 (Session 2)

May 5 - 8, 2026

OSHA #2045

May 12 - 15, 2026

OSHA #501

May 12 - 15, 2026

OSHA #502

May 18 - 20, 2026

SH 702

May 18 - 22, 2026

OSHA #2264

May 19 - 21, 2026

OSHA #503

May 20 - 22, 2026

OSHA #3115

May 26 - 28, 2026

OSHA #510

May 26 - 29, 2026

SH 385

Jun 1 - 5, 2026

OSHA #500

Jun 2 - 5, 2026

OSHA #511

Jun 2 - 5, 2026

MS 901 (Session 3)

Jun 9 - 11, 2026

OSHA #2455

Jun 9 - 11, 2026

OSHA #3095

Jun 9 - 12, 2026

OSHA #2015

Jun 15 - 18, 2026

OSHA #7410

Jun 15, 2026

OSHA #3085

Jun 16 - 18, 2026

OSHA #510

Jun 23 - 26, 2026

RM 101

Jun 23 - 26, 2026

OSHA #500

Jun 29 - Jul 2, 2026

OSHA #511

Jun 29 - Jul 2, 2026

OSHA #502

Jul 6 - 8, 2026

OSHA #501

Jul 7 - 10, 2026

OSHA #503

Jul 8 - 10, 2026

OSHA #3015

Jul 14 - 16, 2026

OSHA #521

Jul 14 - 17, 2026

OSHA #3115

Jul 21 - 23, 2026

OSHA #510

Jul 21 - 24, 2026

OG 202

Jul 28 - 30, 2026

OSHA #511

Jul 28 - 31, 2026

OSHA #500

Aug 4 - 7, 2026

OSHA #7500

Aug 10, 2026

OSHA #510

Aug 11 - 14, 2026

SH 202

Aug 11 - 12, 2026

OSHA #502

Aug 17 - 19, 2026

OSHA #2264

Aug 18 - 20, 2026

OSHA #3095

Aug 18 - 21, 2026

OSHA #503

Aug 19 - 21, 2026

OSHA #3085

Aug 25 - 27, 2026

OSHA #511

Aug 25 - 28, 2026

OSHA #2255

Sep 1 - 3, 2026

OSHA #500

Sep 1 - 4, 2026

OSHA #501

Sep 8 - 11, 2026

OSHA #510

Sep 15 - 18, 2026

OSHA #5810

Sep 15 - 18, 2026

OSHA #2455

Sep 22 - 24, 2026

OSHA #511

Sep 22 - 25, 2026

OSHA #502

Sep 28 - 30, 2026

ATP 191

Sep 29 - Oct 2, 2026

OSHA #500

Sep 29 - Oct 2, 2026

OSHA #503

Sep 30 - Oct 2, 2026

OSHA #3015

Oct 6 - 8, 2026

OSHA #521

Oct 6 - 9, 2026

OSHA #3095

Oct 13 - 16, 2026

OSHA #3115

Oct 13 - 15, 2026

OSHA #2225

Oct 20 - 23, 2026

OSHA #510

Oct 20 - 23, 2026

OSHA #3365

Oct 27 - 30, 2026

OSHA #500

Oct 27 - 30, 2026

OSHA #511

Oct 27 - 30, 2026

OSHA #3085

Nov 3 - 5, 2026

OSHA #502

Nov 9 - 11, 2026

SH 702

Nov 9 - 13, 2026

OSHA #510

Nov 10 - 13, 2026

OSHA #503

Nov 11 - 13, 2026

OSHA #2264

Nov 17 - 19, 2026

OSHA #2455

Nov 17 - 19, 2026

SH 202

Nov 17 - 18, 2026

OSHA #511

Dec 1 - 4, 2026

OSHA #2015

Dec 8 - 11, 2026

OSHA #510

Dec 8 - 11, 2026

OSHA #502

Dec 14 - 16, 2026

OSHA #3095

Dec 15 - 18, 2026

OSHA #503

Dec 16 - 18, 2026

866-906-9190 | uta.edu/ded/osha

COURSES BY LOCATION Austin, TX

Irving, TX

OSHA #5810

Apr 13 - 16, 2026

OSHA #510

Jan 20 - 23, 2026

OSHA #3115

Feb 24 - 26, 2026

OSHA #510

Apr 20 - 23, 2026

OSHA #502

Feb 2 - 4, 2026

OSHA #2264

Mar - Apr 2, 2026

SH 202

Apr 21 - 22, 2026

OSHA #503

Feb 4 - 6, 2026

OSHA #3095

May 19 - 22, 2026

OSHA #511

Apr 27 - 30, 2026

OSHA #2455

Mar 17 - 19, 2026

OSHA #2225

Jun 23 - 26, 2026

OSHA #7300

Apr 27, 2026

OSHA #3095

Apr 14 - 17, 2026

OSHA #2455

Jul 28 - 30, 2026

OSHA #3085

Apr 28 - 30, 2026

ATP 191

Apr 21 - 24, 2026

OSHA #2045

Sep 8 - 11, 2026

OSHA #521

May 4 - 7, 2026

Apr 28 - May 1, 2026

OSHA #501

Nov 3 - 6, 2026

OSHA #7405

May 4, 2026

OSHA #3085

May 12 - 14, 2026

OSHA #500

Dec 1 - 4, 2026

OSHA #3115

May 5 - 7, 2026

OSHA #501

May 19 - 22, 2026

OSHA #2015

May 11 - 14, 2026

OSHA #510

Jun 9 - 12, 2026

OSHA #502

May 11 - 13, 2026

OSHA #3015

Jul 21 - 23, 2026

OSHA #503

May 13 - 15, 2026

RM 101

Aug 4 - 7, 2026

OSHA #500

May 18 - 21, 2026

OSHA #500

Sep 15 - 18, 2026

OSHA #510

May 18 - 21, 2026

OSHA #2015

Sep 22 - 25, 2026

OSHA #511

May 26 - 29, 2026

OSHA #2055

Oct 13 - 15, 2026

RM 101

May 26 - 29, 2026

OSHA #3115

Nov 10 - 12, 2026

OSHA #500

Jun 1 - 4, 2026

OSHA #511

Nov 17 - 20, 2026

OSHA #2045

Jun 8 - 11, 2026

OSHA #2264

Dec 1 - 3, 2026

OSHA #501

Jun 8 - 11, 2026

OSHA #502

Dec 7 - 9, 2026

OSHA #2455

Jun 15 - 17, 2026

OSHA #510

Jun 15 - 18, 2026

OSHA #7410

Jun 18, 2026

OSHA #500

Jun 22 - 25, 2026

OSHA #502

Jun 22 - 24, 2026

OSHA #3095

Jun 29 - Jul 2, 2026

CPT 101

Jun 30 - Jul 2, 2026

OSHA #510

Jul 6 - 9, 2026

OSHA #3015

Jul 7 - 9, 2026

OSHA #500

Jul 13 - 16, 2026

OSHA #2264

Jul 14 - 16, 2026

OSHA #511

Jul 20 - 23, 2026

OSHA #3085

Jul 21 - 23, 2026

OSHA #3115

Jul 28 - 30, 2026

OSHA #502

Aug 3 - 5, 2026

OSHA #510

Aug 3 - 6, 2026

OSHA #503

Aug 5 - 7, 2026

OSHA #511

Aug 10 - 13, 2026

OSHA #7500

Aug 14, 2026

OSHA #500

Aug 17 - 20, 2026

SH 385

Aug 17 - 21, 2026

OSHA #501

Aug 24 - 27, 2026

OSHA #2455

Aug 25 - 27, 2026

OSHA #521

OSHA #503

Dec 9 - 11, 2026

Freeport, TX

Houston, TX OSHA #502

Jan 5 - 7, 2026

OSHA #511

Jan 5 - 8, 2026

OSHA #503

Jan 7 - 9, 2026

OSHA #510

Jan 12 - 15, 2026

OSHA #3015

Jan 13 - 15, 2026

OSHA #500

Jan 20 - 23, 2026

OSHA #521

Jan 20 - 23, 2026

ATP 191

Jan 26 - 29, 2026

OSHA #511

Jan 26 - 29, 2026

SH 385

Feb 2 - 6, 2026

OSHA #3085

Feb 3 - 5, 2026

OSHA #510

Feb 9 - 12, 2026

OSHA #3015

Apr 7 - 9, 2026

OSHA #3115

Feb 10 - 12, 2026

OSHA #511

Oct 12 - 15, 2026

OSHA #500

Feb 16 - 19, 2026

OSHA #500

Nov 2 - 5, 2026

OSHA #502

Feb 16 - 18, 2026

OSHA #501

Nov 9 - 12, 2026

OSHA #503

Feb 18 - 20, 2026

OSHA #2055

Feb 24 - 26, 2026

OSHA #2455

Feb 24 - 26, 2026

OSHA #510

Mar 2 - 5, 2026

OSHA #511

Mar 2 - 5, 2026

OSHA #3095

Mar 9 - 12, 2026

OSHA #501

Mar 9 - 12, 2026

OSHA #3365

Mar 16 - 19, 2026

OSHA #500

Mar 16 - 19, 2026

OSHA #510

Mar 23 - 26, 2026

OSHA #2264

Mar 24 - 26, 2026

El Paso, TX OSHA #2225

Jan 13 - 16, 2026

OSHA #521

Feb 24 - 27, 2026

OSHA #2045

Mar 17 - 20, 2026

OSHA #500

Mar 24 - 27, 2026

OSHA #3015

Mar 31 - Apr 2, 2026

OSHA #510

Jul 7 - 10, 2026

OSHA #502

Jul 13 - 15, 2026

OSHA #503

Jul 15 - 17, 2026

OSHA #3085

Aug 4 - 6, 2026

OSHA #511

Sep 8 - 11, 2026

OSHA #501

Sep 29 - Oct 2, 2026

OSHA #2264

Oct 13 - 15, 2026

OSHA #3095

Nov 3 - 6, 2026

OSHA #3115

Dec 1 - 3, 2026

OSHA #502

Mar 30 - Apr 1, 2026

OSHA #511

Mar 30 - Apr 2, 2026

OSHA #500

Apr 6 - 9, 2026

SH 702

Apr 6 - 10, 2026

OSHA #2225

Apr 13 - 16, 2026

The University of Texas at Arlington | OSHA Education Center

COURSES BY LOCATION OKLAHOMA

OSHA #510

Aug 31 - Sep 3, 2026

OSHA #511

May 5 - 8, 2026

OSHA #521

Aug 31 - Sep 3, 2026

OSHA #3115

Jun 2 - 4, 2026

ATP 191

Sep 8 - 11, 2026

OSHA #2225

Jun 30 - Jul 3, 2026

OSHA #500

Sep 8 - 11, 2026

OSHA #2045

Jul 14 - 17, 2026

OSHA #2264

Jan 6 - 8, 2026

OSHA #502

Sep 14 - 16, 2026

OSHA #502

Jul 27 - 29, 2026

OSHA #7845

Jan 19, 2026

OSHA #511

Sep 14 - 17, 2026

OSHA #503

Jul 29 - 31, 2026

OSHA #3115

Jan 20 - 22, 2026

OSHA #3095

Sep 21 - 24, 2026

OSHA #510

Aug 18 - 21, 2026

OSHA #2455

Jan 27 - 29, 2026

OSHA #3085

Sep 22 - 24, 2026

OSHA #2455

Sep 8 - 10, 2026

OSHA #510

Feb 10 - 13, 2026

OSHA #510

Sep 28 - Oct 1, 2026

OSHA #3095

Oct 6 - 9, 2026

OSHA #3095

Feb 17 - 20, 2026

OSHA #3015

Sep 29 - Oct 1, 2026

OSHA #510

Oct 27 - 30, 2026

OSHA #502

Mar 2 - 4, 2026

OSHA #500

Oct 5 - 8, 2026

OSHA #3085

Dec 15 - 17, 2026

OSHA #503

Mar 4 - 6, 2026

SH 702

Oct 5 - 9, 2026

OSHA #501

Apr 14 - 17, 2026

OSHA #3115

Oct 6 - 8, 2026

OSHA #511

Apr 21 - 24, 2026

MS 901

Oct 12 - 16, 2026

OSHA #521

May 26 - 29, 2026

OSHA #2225

Oct 12 - 15, 2026

OSHA #2055

Jul 7 - 9, 2026

OSHA #2055

Oct 19 - 21, 2026

OSHA #510

Oct 19 - 22, 2026

SH 202

Oct 20 - 21, 2026

OSHA #502

Oct 26 - 28, 2026

OSHA #2264

Oct 27 - 29, 2026

OSHA #503

Oct 28 - 30, 2026

OSHA #511

Nov 2 - 5, 2026

RM 101

Nov 2 - 5, 2026

MS 901 (Session 2)

Nov 9 - 12, 2026

OSHA #2455

Nov 10 - 12, 2026

OSHA #2045

Nov 16 - 19, 2026

OSHA #510

Nov 16 - 19, 2026

OSHA #3365

Nov 30 - Dec 3, 2026

OSHA #502

Nov 30 - Dec 2, 2026

OSHA #511

Nov 30 - Dec 3, 2026

OSHA #503

Dec 2 - 4, 2026

OSHA #500

Dec 7 - 10, 2026

OSHA #521

Dec 7 - 10, 2026

MS 901 (Session 3)

Dec 8 - 10, 2026

OSHA #510

Dec 14 - 17, 2026

OSHA #3015

Dec 15 - 17, 2026

San Antonio, TX

NEW MEXICO Albuquerque, NM OSHA #2045

Jan 13 - 16, 2026

OSHA #3085

Jan 27 - 29, 2026

OSHA #510

Feb 17 - 20, 2026

OSHA #2455

Feb 24 - 26, 2026

OSHA #500

Mar 3 - 6, 2026

OSHA #502

Mar 23 - 25, 2026

OSHA #503

Mar 25 - 27, 2026

OSHA #2264

Apr 7 - 9, 2026

OSHA #511

Apr 14 - 17, 2026

OSHA #3015

Apr 28 - 30, 2026

OSHA #2225

May 5 - 8, 2026

RM 101

May 12 - 15, 2026

OSHA #3095

May 26 - 29, 2026

OSHA #2015

Jun 9 - 12, 2026

OSHA #510

Jun 16 - 19, 2026

OSHA #3115

Jun 23 - 25, 2026

OSHA #2055

Jul 14 - 16, 2026

OSHA #501

Jul 21 - 24, 2026

SH 702

Jul 27 - 31, 2026

OSHA #521

Aug 11 - 14, 2026

OSHA #2455

Aug 18 - 20, 2026

OSHA #502

Aug 24 - 26, 2026

OSHA #503

Aug 26 - 28, 2026 Sep 1 - 4, 2026

OSHA #500

Jan 27 - 30, 2026

OSHA #511

OSHA #3015

Feb 10 - 12, 2026

OSHA #3085

OSHA #510 OSHA #2264

Sep 29 - Oct 1, 2026

Mar 31 - Apr 3, 2026

OSHA #510

Nov 3 - 6, 2026

Apr 21 - 23, 2026

OSHA #500

Dec 15 - 18, 2026

Oklahoma City, OK

OSHA #7205

Jul 27, 2026

OSHA #2015

Jul 28 - 31, 2026

OSHA #500

Aug 11 - 14, 2026

OSHA #2264

Sep 15 - 17, 2026

RM 101

Sep 22 - 25, 2026

OSHA #2455

Oct 20 - 22, 2026

OSHA #3085

Oct 20 - 22, 2026

OSHA #3115

Oct 27 - 29, 2026

OSHA #2045

Dec 8 - 11, 2026

OSHA #510

Dec 15 - 18, 2026

Tulsa, OK OSHA #3015

Mar 10 - 12, 2026

OSHA #2045

Jun 16 - 19, 2026

OSHA #510

Jun 30 - Jul 3, 2026

OSHA #2455

Jul 21 - 23, 2026

OSHA #3095

Aug 25 - 28, 2026

OSHA #502

Aug 31 - Sep 2, 2026

OSHA #503

Sep 2 - 4, 2026

OSHA #511

Oct 6 - 9, 2026

OSHA #3085

Feb 24 - 26, 2026

OSHA #3015

Mar 10 - 12, 2026

VIEW ALL AVAILABLE COURSES

866-906-9190 | uta.edu/ded/osha

LIVE WEBCASTS OSHA #521

Feb 17 - 20, 2026

SH 702

Apr 13 - 17, 2026

Jan 5 - 6, 2026

SH 900

Feb 17 - 19, 2026

OSHA #2264

Apr 14 - 16, 2026

OSHA #3365

Jan 6 - 9, 2026

OSHA #503

Feb 18 - 20, 2026

OSHA #2455

Apr 14 - 16, 2026

OSHA #501

Jan 6 - 9, 2026

FS 201

Feb 24 - 26, 2026

OSHA #3015

Apr 14 - 16, 2026

OSHA #510

Jan 6 - 9, 2026

OSHA #2055 Evening

Feb 24 - Mar 5, 2026

OSHA #511

Apr 14 - 17, 2026

OSHA #511

Jan 6 - 9, 2026

OSHA #2255

OSHA #7230

Apr 20 - 21, 2026

OSHA #7505

Evening

Feb 24 - 26, 2026

Evening

MS 901

Jan 12 - 16, 2026

OSHA #3015 En Español Feb 24 - 26, 2026

OSHA #7515

Apr 20, 2026

OSHA #502

Jan 12 - 14, 2026

OSHA #500

Feb 24 - 27, 2026

OSHA #2015

Apr 21 - 24, 2026

OSHA #7845

Jan 12, 2026

OSHA #510

Feb 24 - 27, 2026

OSHA #3115

Apr 21 - 23, 2026

OSHA #3115

Jan 13 - 15, 2026

MS 901 (Session 3)

Mar 3 - 5, 2026

OSHA #500

Apr 21 - 24, 2026

OSHA #500

Jan 13 - 16, 2026

OSHA #2455

Mar 3 - 5, 2026

OSHA #510

Apr 21 - 24, 2026

OSHA #510

Jan 13 - 16, 2026

OSHA #3095

Mar 3 - 6, 2026

RM 203

Apr 21 - 23, 2026

OSHA #521

Jan 13 - 16, 2026

OSHA #511

Mar 3 - 6, 2026

OSHA #502

Apr 27 - 29, 2026

OSHA #510

Jan 13 - 23, 2026

OSHA #510

Mar 9 - 12, 2026

OSHA #7300

Apr 27, 2026

OSHA #503

Jan 14 - 16, 2026

OSHA #521

Mar 9 - 19, 2026

LS 101

Apr 28 - May 1, 2026

OSHA #2455

Jan 20 - 22, 2026

OSHA #7200

Mar 9, 2026

OSHA #510

Apr 28 - May 1, 2026

OSHA #3095

Jan 20 - 23, 2026

RM 101

Mar 9 - 12, 2026

OSHA #511

Apr 28 - May 1, 2026

OSHA #510

Jan 20 - 23, 2026

OSHA #2264

Mar 10 - 12, 2026

RM 101

Apr 28 - May 1, 2026

RM 201

Jan 20 - 22, 2026

OSHA #3115 En Español Mar 10 - 12, 2026

OSHA #503

Apr 29 - May 1, 2026

OSHA #2225

Jan 20 - 23, 2026

OSHA #500

Mar 10 - 13, 2026

OSHA #7405

May 4, 2026

OSHA #3095 En Español

Jan 27 - 30, 2026

HM 241

Mar 16 - 20, 2026

OSHA #3015

OSHA #501

Jan 27 - 30, 2026

OSHA #510

Mar 16 - 19, 2026

OSHA #3095

May 5 - 8, 2026

OSHA #510

Jan 27 - 30, 2026

ATP 191

Mar 17 - 20, 2026

OSHA #500

May 5 - 8, 2026

OSHA #511

Jan 27 - 30, 2026

OSHA #2225

Mar 17 - 20, 2026

OSHA #501

May 5 - 8, 2026

RM 101

Jan 27 - 30, 2026

OSHA #501

Mar 17 - 20, 2026

OSHA #7505

May 11, 2026

OSHA #7005

Feb 2, 2026

SH 920

Mar 17 - 20, 2026

OSHA #2225

May 12 - 15, 2026

MS 901 (Session 2)

Feb 3 - 6, 2026

OSHA #502

Mar 23 - 25, 2026

OSHA #2264

May 12 - 14, 2026

OSHA #2264

Feb 3 - 5, 2026

OSHA #2045

Mar 24 - 27, 2026

OSHA #510

May 12 - 15, 2026

OSHA #3115

Feb 3 - 5, 2026

OSHA #2255 Evening

Mar 24 - Apr 2, 2026

OSHA #521

May 12 - 15, 2026

OSHA #500

Feb 3 - 6, 2026

OSHA #3115

Mar 24 - 26, 2026

OSHA #6005

May 12 - 15, 2026

OSHA #510

Feb 3 - 6, 2026

OSHA #500

En Español Mar 24 - 27, 2026

OSHA #7005

May 18, 2026

OSHA #500

Feb 9 - 19, 2026

OSHA #511

Mar 24 - 27, 2026

OSHA #7105

May 18, 2026

OSHA #2015

Feb 10 - 13, 2026

OSHA #503

Mar 25 - 27, 2026

OSHA #2015

May 19 - 29, 2026

OSHA #2045

Feb 10 - 13, 2026

RM 202

Mar 30 - Apr 3, 2026

OSHA #2055

May 19 - 21, 2026

OSHA #3095

Feb 10 - 13, 2026

OSHA #500

Mar 31 - Apr 3, 2026

OSHA #3115

May 19 - 21, 2026

OSHA #511

Feb 10 - 13, 2026

OSHA #510

Mar 31 - Apr 3, 2026

OSHA #510

May 19 - 22, 2026

SH 801

Feb 10 - 12, 2026

OSHA #521

Mar 31 - Apr 3, 2026

OSHA #511

May 19 - 22, 2026

OSHA #502

Feb 16 - 18, 2026

OSHA #2045

Apr 6 - 16, 2026

OSHA #2455

May 26 - 28, 2026

Evening

En Español

Evening

OSHA #7000

Evening

May 5 - 15, 2026

Feb 16, 2026

OSHA #2455

Apr 7 - 9, 2026

OSHA #3365

May 26 - 29, 2026

OSHA #2264 En Español Feb 17 - 19, 2026

OSHA #3095

Apr 7 - 10, 2026

OSHA #500

May 26 - 29, 2026

OSHA #3015

Feb 17 - 19, 2026

OSHA #501

Apr 7 - 10, 2026

OSHA #501

May 26 - 29, 2026

OSHA #501

Feb 17 - 20, 2026

OSHA #510

Apr 7 - 10, 2026

OSHA #5810

May 26 - 29, 2026

OSHA #510

Feb 17 - 20, 2026

SH 925

Apr 7 - 9, 2026

OSHA #502

Jun 1 - 3, 2026

The University of Texas at Arlington | OSHA Education Center

LIVE WEBCASTS Jun 1 - 2, 2026

OSHA #501

Jul 14 - 17, 2026

OSHA #7215

Jun 1, 2026

OSHA #511

Jul 14 - 17, 2026

MS 901 (Session 3)

Sep 8 - 10, 2026

SH 810

Jun 1 - 5, 2026

OSHA #7005

Jul 14 - 15, 2026

OSHA #2015

Sep 8 - 11, 2026

OSHA #2045

Jun 2 - 5, 2026

SH 910

Jul 14 - 16, 2026

OSHA #3115

Sep 8 - 10, 2026

OSHA #3095

Jun 2 - 5, 2026

OSHA #7230

Jul 20, 2026

OSHA #510

Sep 8 - 11, 2026

OSHA #510

Jun 2 - 5, 2026

OSHA #7115 En Español

Jul 20 - 21, 2026

OSHA #511

Sep 8 - 11, 2026

OSHA #511

Jun 2 - 5, 2026

OSHA #2255

Jul 21 - 23, 2026

OSHA #502

Sep 14 - 16, 2026

OSHA #503

Jun 3 - 5, 2026

OSHA #500

Jul 21 - 24, 2026

OSHA #7120

Sep 14 - 15, 2026

OSHA #5402

Jun 8 - 10, 2026

OSHA #510

Jul 21 - 24, 2026

OSHA #7205

Sep 14, 2026

OSHA #3015

Jun 9 - 11, 2026

OSHA #510

Jul 21 - 24, 2026

RM 202

Sep 14 - 18, 2026

OSHA #510

Jun 9 - 12, 2026

RM 101

Jul 21 - 24, 2026

ATP 191

Sep 15 - 18, 2026

OSHA #511

Jun 9 - 12, 2026

OSHA #7225

Jul 27 - 28, 2026

OSHA #2045

Sep 15 - 18, 2026

OSHA #7115

Evening

En Español

Evening

En Español

Evening

Jun 9, 2026

OSHA #3015

Jul 28 - 30, 2026

OSHA #521

Sep 15 - 18, 2026

RM 101

Jun 9 - 12, 2026

OSHA #3095

Jul 28 - 31, 2026

OSHA #503

Sep 16 - 18, 2026

ATP 191

Jun 15 - 25, 2026

OSHA #510

Jul 28 - 31, 2026

OSHA #7515

Sep 21, 2026

OSHA #500

Jun 15 - 18, 2026

SH 900

Jul 28 - 30, 2026

OSHA #3015

Sep 22 - 24, 2026

OSHA #511

Jun 15 - 18, 2026

OSHA #3095

Aug 3 - 13, 2026

OSHA #500

Sep 22 - 25, 2026

OSHA #7410

Jun 15, 2026

OSHA #2264

Aug 4 - 6, 2026

OSHA #501

Sep 22 - 25, 2026

SH 385

Jun 15 - 22, 2026

OSHA #3115

Aug 4 - 6, 2026

OSHA #510

Sep 22 - 25, 2026

OSHA #2264

Jun 16 - 18, 2026

OSHA #511

Aug 4 - 7, 2026

RM 101

OSHA #7120

Jun 22, 2026

OSHA #521

Aug 4 - 7, 2026

OSHA #2455

Sep 29 - Oct 1, 2026

OG 202

Jun 23 - 25, 2026

OSHA #502

Aug 10 - 12, 2026

OSHA #3095

Sep 29 - Oct 2, 2026

OSHA #501

Jun 23 - 26, 2026

OSHA #7500

Aug 10, 2026

OSHA #3365

Sep 29 - Oct 2, 2026

OSHA #510

Jun 23 - 26, 2026

MS 901 (Session 2)

Aug 11 - 14, 2026

OSHA #511

Sep 29 - Oct 2, 2026

OSHA #521

Jun 23 - 26, 2026

OSHA #2455

Aug 11 - 13, 2026

OSHA #2225

Oct 6 - 9, 2026

SH 930

Jun 23 - 26, 2026

OSHA #501

Aug 11 - 14, 2026

OSHA #2264

Oct 6 - 8, 2026

SH 688

Jun 29 - 30, 2026

OSHA #510

Aug 11 - 14, 2026

OSHA #2455

Oct 6 - 8, 2026

OSHA #502

Jun 29 - Jul 1, 2026

OSHA #503

Aug 12 - 14, 2026

OSHA #510

Oct 6 - 9, 2026

OSHA #510

Jun 29 - Jul 2, 2026

OSHA #7005

Aug 17, 2026

OSHA #7845

Evening Evening

OSHA #7500 En Español

Jun 29, 2026

OSHA #3115

Evening

OSHA #7000

Evening

Sep 28 - Oct 8, 2026

Oct 12 - 13, 2026

Aug 18 - 27, 2026

OSHA #500

Oct 13 - 16, 2026

Jun 30 - Jul 2, 2026

OSHA #500

Aug 18 - 21, 2026

OSHA #510

Oct 13 - 16, 2026

Jun 30, 2026

OSHA #510

Aug 18 - 21, 2026

OSHA #511

Oct 13 - 16, 2026

RM 201

Jun 30 - Jul 2, 2026

OSHA #511

Aug 18 - 21, 2026

RM 101

Oct 13 - 16, 2026

OSHA #2455

Jul 1 - 3, 2026

OSHA #2225

Aug 25 - 28, 2026

OSHA #502

Oct 19 - 21, 2026

MS 901

Jul 6 - Sep 10, 2026

OSHA #500

Aug 25 - 28, 2026

OSHA #7225

Oct 19, 2026

OSHA #3115 OSHA #7845 En Español

OSHA #2264

Evening

Oct 20 - 29, 2026

OSHA #502

En Español

Jul 6 - 8, 2026

OSHA #2455

Evening

Jul 7, 2026

OSHA #510

Aug 25 - 28, 2026

OSHA #3115

Oct 20 - 22, 2026

OSHA #2015

Jul 7 - 10, 2026

OSHA #5400

Aug 25 - 28, 2026

OSHA #501

Oct 20 - 23, 2026

OSHA #2225

Jul 7 - 10, 2026

OSHA #2264

Sep 1 - 3, 2026

OSHA #510

Oct 20 - 23, 2026

OSHA #3095

Jul 7 - 10, 2026

OSHA #2455

Sep 1 - 11, 2026

SH 801

Oct 20 - 22, 2026

OSHA #500

Jul 7 - 10, 2026

OSHA #3095

Sep 1 - 4, 2026

OSHA #503

Oct 21 - 23, 2026

OSHA #503

Jul 8 - 10, 2026

OSHA #501

Sep 1 - 4, 2026

SH 702

Oct 26 - 30, 2026

Jul 13 - 17, 2026

RM 101

Sep 1 - 4, 2026

OSHA #3095

Oct 27 - 30, 2026

En Español

OSHA #5410

OSHA #501

En Español Aug 25 - 28, 2026

Evening

866-906-9190 | uta.edu/ded/osha

SPECIAL COURSE TIMES & OFFERINGS LIVE WEBCASTS CONTINUED OSHA #500

Oct 27 - 30, 2026

OSHA #3115

Nov 17 - 19, 2026

OSHA #511

Dec 15 - 18, 2026

OSHA #521

Oct 27 - 30, 2026

OSHA #501

Nov 17 - 20, 2026

OSHA #521

Dec 15 - 18, 2026

RM 203

Oct 27 - 29, 2026

HM 241

Nov 30 - Dec 4, 2026

RM 101

Dec 15 - 18, 2026

OSHA #502

Nov 30 - Dec 2, 2026

OSHA #501

Jun 23 - 26, 2026

OSHA #7505

Nov 2, 2026

LS 101

Nov 3 - 6, 2026

OSHA #7200 Evening Nov 30 - Dec 1, 2026

OSHA #510

Jun 23 - 26, 2026

OSHA #2455

Nov 3 - 5, 2026

OSHA #3095

Dec 1 - 4, 2026

OSHA #521

Jun 23 - 26, 2026

OSHA #510

Nov 3 - 6, 2026

OSHA #510

Dec 1 - 4, 2026

SH 930

Jun 23 - 26, 2026

OSHA #511

Nov 3 - 6, 2026

SH 920

Dec 1 - 4, 2026

OSHA #2455

Jun 30 - Jul 2, 2026

OSHA #2225

Nov 9 - 19, 2026

OSHA #503

Dec 2 - 4, 2026

OSHA #3115

Jun 30 - Jul 2, 2026

OSHA #2055

Nov 10 - 12, 2026

OSHA #5410

Dec 7 - 11, 2026

OSHA #502

Jun 30 - Jul 2, 2026

OSHA #2264

Nov 10 - 12, 2026

OSHA #7105

Evening

Dec 7, 2026

OSHA #510

Jun 30 - Jul 3, 2026

OSHA #500

Nov 10 - 13, 2026

OSHA #2055

en Español Dec 8 - 10, 2026

OSHA #510

Nov 10 - 13, 2026

OSHA #500

OSHA #7210

Nov 16, 2026

FS 201

Evening

MS 901

Jul 6 - 10, 2026

Dec 8 - 11, 2026

OSHA #2015

Jul 7 - 10, 2026

OSHA #510

Dec 8 - 11, 2026

OSHA #2225

Jul 7 - 10, 2026

Nov 17 - 19, 2026

OSHA #511

Dec 8 - 11, 2026

OSHA #3095

Jul 7 - 10, 2026

OSHA #2015

Nov 17 - 20, 2026

OSHA #7410

Dec 14 - 15, 2026

OSHA #500

Jul 7 - 10, 2026

OSHA #3015

Nov 17 - 19, 2026

OSHA #2264

Evening

Dec 15 - 17, 2026

SPANISH CLASSES LIVE WEBCASTS OSHA #510

Jan 20 - 23, 2026

OSHA #2455

Apr 7 - 9, 2026

OSHA #3095

Jan 27 - 30, 2026

OSHA #511

Jun 2 - 5, 2026

OSHA #7115

Jul 20 - 21, 2026

OSHA #2264

Feb 17 - 19, 2026

OSHA #7500

Jun 29, 2026

OSHA #510

Jul 21 - 24, 2026

OSHA #3015

Feb 24 - 26, 2026

OSHA #7845

Jun 30, 2026

OSHA #501

Aug 25 - 28, 2026

OSHA #3115

Mar 10 - 12, 2026

OSHA #502

Jul 6 - 8, 2026

OSHA #2455

Oct 6 - 8, 2026

OSHA #500

Mar 24 - 27, 2026

OSHA #503

Jul 8 - 10, 2026

OSHA #2055

Dec 8 - 10, 2026

FREE COURSES

OSHA #7845

Jan 19, 2026

OSHA #7405

May 4, 2026

OSHA #7005

Feb 2, 2026

OSHA #7105

May 18, 2026

OSHA #7000

Feb 16, 2026

OSHA #7215

Jun 1, 2026

OSHA #7500

Aug 10, 2026

OSHA #7200

Mar 9, 2026

OSHA #7410

Jun 15, 2026

OSHA #7500

Aug 10, 2026

OSHA #7515

Apr 20, 2026

OSHA #7410

Jun 15, 2026

OSHA #7500

Aug 14, 2026

OSHA #7300

Apr 27, 2026

OSHA #7120

Jun 22, 2026

OSHA #7005

Aug 17, 2026

OSHA #7300

Apr 27, 2026

OSHA #7500

en Español

Jun 29, 2026

OSHA #7205

Sep 14, 2026

OSHA #7300

Apr 27, 2026

OSHA #7845

en Español

Jun 30, 2026

OSHA #7225

Oct 19, 2026

OSHA #7405

May 4, 2026

OSHA #7230

Jul 20, 2026

OSHA #7505

Nov 2, 2026

OSHA #7405

May 4, 2026

OSHA #7115

Jul 20 - 21, 2026

OSHA #7210

Nov 16, 2026

The University of Texas at Arlington | OSHA Education Center

POLICIES

uta.edu/ded/osha 866-906-9190 | osha@uta.edu

SSH

CSHO

SHEP

SPECIALIST IN SAFETY & HEALTH

CERTIFIED SAFETY & HEALTH OFFICIAL

SAFETY, HEALTH & ENVIRONMENTAL PROFESSIONAL

MC MASTER CERTIFICATION

COURSE MATERIALS All course materials will be provided by UTA unless otherwise indicated.

ACCOMMODATIONS The Extension and Extended Campus is dedicated to providing equal educational opportunities to all qualified course participants. Contact cedquestions@uta.edu or call 866-906-9190 for information regarding special accommodations.

TITLE IX POLICY The University of Texas at Arlington does not discriminate on the basis of race, color, national origin, religion, age, gender, sexual orientation, disabilities, genetic information, and/or veteran status in its educational programs or activities it operates. For more information, visit uta.edu/eos. For information regarding Title IX, visit uta.edu/titleix.

CANCELLATIONS The University of Texas at Arlington reserves the right to change or cancel any class. In the event that a class must be changed or canceled, you will be notified by email and/or phone. You are required to provide a valid email address and phone number to ensure notification. Cancellations due to insufficient enrollment will be made approximately one (1) to two (2) business days prior to the class start date. Participant withdrawals from a course, may result in a processing fee. If a course is canceled by UTA, participants have the option to transfer to another course, hold their funds in escrow, or receive a refund. No fees will be charged for these transactions if UTA cancels a class.

866-906-9190 | uta.edu/ded/osha

140 W. Mitchell Street | Arlington, TX 76019 uta.edu/ded/osha | 866-906-9190

Mavericks Go Green! Made with Recycled Content.

UTA OSHA TRAINING EDUCATION CENTER | 866.906.9190 | osha@uta.edu | uta.edu/ded/osha

ADVANCE YOUR EXPERTISE. LEAD WITH CONFIDENCE. The Certified Safety and Health Official (CSHO) certificate from the University of Texas at Arlington OSHA Education Center is the industry’s benchmark for professionals who want more than compliance.

Take your safety career to the next level.

CONSTRUCTION

GENERAL INDUSTRY

CSHO CERTIFIED SAFETY & HEALTH OFFICIAL

HEALTHCARE

EARN RECOGNITION

– Join thousands of safety professionals nationwide who carry the CSHO credential.