3M™ Reusable Half Mask 7500 Series Technical datasheet Description 3M™ Reusable Half Mask 7500 Series have set a new standard in comfort. This facepiece was designed with the wearer in mind. Its soft sealing surface, along with the 3M™ Cool Flow™ Valve, enhances wearer comfort and face fit. Reduced breathing resistance helps to minimise heat build-up in the mask and increases your comfort. Available in three sizes, all masks have the 3M™ bayonet connection system allowing connection to a broad range of twin lightweight filters or approved powered and supplied air systems to protect against gases, vapours and particulates depending on your individual needs.
Key Features • Dual-mode head harness adjusts easily for standard or drop-down mode
Standards and approvals These products have been tested to the relevant European Standards: 3M™ Reusable Half Mask, 7500 Series to EN 140:1998 for Half Masks, EN 12942:1998 + A2:2008 and EN 14594:2005 (with approved air delivery units). These products are in conformity with European regulation and UK regulations and/or Directives. The Certificates and Declarations of Conformity available at the following website: www.3M.com\ Respiratory\certs
Use When properly fitted and operated, 3M™ Reusable Half Mask 7500 Series may be used:
3M™ Reusable Half Mask 7500 Series
Nominal Protection Factor*
P1 Particulate Filter
4
P2 Particulate Filter
12
P3 Particulate Filter
48
Class 1 Gas & Vapour Filters
50 or 1000ppm (Whichever is lower)
Class 2 Gas & Vapour Filters 3M™ Versaflo™ TR-600 & TR800 Powered Air Respirator S-200+ Supplied Air Unit
50 or 5000ppm (Whichever is lower) See Powered Air Respirator Datasheet See S-200+ Datasheet