STICK ELECTRODE | MILD STEEL
Arcweld 6013 TOP FEATURES • Stable arc and low spatter level.
CLASSIFICATION AWS A5.1 EN ISO 2560-A
• Good slag releasing. • Nice bead appearance.
E 6013 E 38 0 R 12
CURRENT TYPE DC- / AC (OCV min. 60V)
• Very good weldability on DC - current and AC • Can also be used in DC+.
WELDING POSITIONS All position, except vertical down CHEMICAL COMPOSITION (WEIGHT %), TYPICAL, ALL WELD METAL C 0.09
Mn 0.4
Si 0.3
MECHANICAL PROPERTIES, TYPICAL, ALL WELD METAL Yield strength Required Condition* (MPa) AWS A5.1 EN ISO 2560-A Typical values
AW AW AW
≥330 not specified 430
P ≤0.03
S ≤0.02
Tensile strength (MPa)
Elongation (%)
Impact ISO-V (J) 0°C
≥430 470-600 550
≥17 ≥20 24
not specified min. 47 55
*AW: As-welded OUTPUT RANGE Diameter x Length (mm)
Current range (A)
2.5x350 3.2x350 4.0x350
60-90 110-135 160-180
PACKAGING AND AVAILABLE SIZES Diameter x Length Packaging (mm) 2.5 x 350 CBOX 3.2 x 350 CBOX 4.0 x 350 CBOX
Electrodes/pack 238 140 90
Net weight/pack (kg) 4.5 4.5 4.5
Item number 609010-1 609011-1 609012-1
TEST RESULTS Test results for mechanical properties, deposit or electrode composition and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application Safety Data Sheets (SDS) are available here:
Subject to Change – The information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.eu for any updated information.
Arcweld 6013-EN-24/01/24
www.lincolnelectric.eu
2024-01-24 15:38:49