BESSEY Clamping- and Cutting Technology
Complete catalogue 2013/2014 BESSEY Complete catalogue 2013/2014
Simply better.
Simply better.
cts u d o r p New 2013
Variable high-performance clamps – Complete sets SLV and GSV Page 48 - 51
All-steel screw clamp classiX GS Page 33
http: ⁄ ⁄ www.youtube.com/user/besseytoolsdeutsch http: ⁄ ⁄ newsletter.bessey.de E-Newsletter
www.bessey.de BESSEY Tool GmbH & Co. KG P.O. Box 11 54 74301 Bietigheim-Bissingen, Germany Fon +49 7142 401-0 Fax +49 7142 401-452 E-Mail: info@bessey.de
30 07394 „h1“ [EN_oPr]
https: ⁄ ⁄ www.facebook.com/BESSEY.Tool.Einfach.Besser
WA 01/2013
http: ⁄ ⁄ www.bessey.de
E-Newsletter
Fitters‘ clamp classiX GSL High-performance clamp classiX GSM Page 42
Features of BESSEY products You can identify the individual performance features of BESSEY products with the help of assigned symbols. The complete overview unfolds here!
General information Order -No.
Weight
Packaging unit
VB0001 – VB0003 = Clamping Technology discount groups VD0001 – VD0003 = Cutting Technology discount groups We request you to place your orders in packaging units. The BESSEY Product Development Department reserves the right for technical alterations. Errors and omissions excepted – to the best of our knowledge the information supplied is accurate.
Clamping technology Wood
Steel
Plastic
Sensitive materials
b
a
Opening
Throat depth
Rail
Diameter
Angle
Hole dia
Clamping force
Jaw width
Jaw height
Jaw length
Strength of current max.
New range of self-adjusting toggle clamps
With 2 options for securing and 3 clamping methods
x
Fixing screw hole dia
Caution! Clamping tools are not suitable for lifting, pulling or transporting. Improper use may lead to personal injuries – or material damages. They should only be clamped manually without using any auxiliary tools.
Cutting Technology Overall length
Continuous, straight and curved cuts, right
Blade length
Continuous, straight and curved cuts, left
Sheet thickness (600 N/mm²)
Short, straight and narrow curved cuts, right
Product life expectancy
Short, straight and narrow curved cuts, left
HSS/TiN-coated min. 65 HRC
Straight and curved cuts with a large radius in both left and right directions
HSS min. 65 HRC
Continuous, straight cuts
Special High grade steel min. 61 HRC
Short, straight cuts, notch
High grade steel min. 59 HRC
Circular cuts
Quality steel min. 56 HRC L = Left cut design (refer to page 118 as well) SB = On carded hang pack Standard tin snips with a rocker spring, available on request for an extra charge. Caution! Always wear protective goggles and gloves while working. Sheared parts may injure the workers and bystanders. Disconnect the power supply while working on electrical devices, else there is a risk of an electric shock. Move the snips in the cutting direction away from your body. Only use original-spare parts whenever required. Tools should only be used manually without using any auxiliary tools. Improper use may lead to personal injuries – or material damages.
Page 90 - 97 GHSY
D15A SGM
BESSEY Clamping Technology
Table of contents 14-23
Malleable cast iron screw clamps Malleable cast iron screw clamp TG – with 2-component plastic handle – with tried-and-true wooden handle – with tommy bar
26-29
OMEGA screw clamp GMZ – with 2-component plastic handle – with tommy bar 30-33
Heavy duty malleable cast iron screw clamp TGK – with 2-component plastic handle – with tried-and-true wooden handle – with tommy bar Malleable cast iron screw clamp TPN – with 2-component plastic handle – with tried-and-true wooden handle Heavy duty malleable cast iron screw clamp TKPN – with tried-and-true wooden handle
NEW
34-37
24-25
All-steel screw clamp classiX GS – with tried-and-true wooden handle – with tommy bar
Rails for size SLV / GSV High-performance clamp STBVC, extremly heavy duty
Pressure plates for high-performance clamps – X-pressure plate – V-pressure plate
NEW
Pump clamp PZ
Sliding arm for size SLV / GSV
52-53
Fitters‘ clamp classiX GSL High-performance clamp classiX GSM
C-clamps
C-clamp VC, SC, CDF-C
Lever clamps KombiKlamp
Lever clamp GH, SGHS
54-57 KombiKlamp SG-VAD
Body clamps and area pressure clamps K Body REVO KR K Body REVO Vario KRV
High-performance clamps 44-45
U-shaped clamps
Fitters‘ clamp SLM U-shaped clamps GUZ, SGU, STBU, GUH
Accessories: Variable jaw KR-VO Adapter KR-AS Framing set KP Extender KBX
UniKlamp UK
High-performance clamp SGM 46-47
Claw clamps Area pressure clamp FK
Pump clamps
-
Variable screw clamps
High-performance clamp-set SLV / GSV
All-steel screw clamps
43
38-42
Deep troath screw clamp TGNT – with tried-and-true wooden handle – with tommy bar
48-51
High-performance clamp STBS, extremly heavy duty
All-steel screw clamp GZ – with 2-component plastic handle – with tried-and-true wooden handle – with tommy bar
Malleable cast iron screw clamp TGRC – with tried-and-true wooden handle – with tommy bar
Heavy duty malleable cast iron screw clamp TGKR – with tried-and-true wooden handle
High-performance clamp STBM, heavy duty
OMEGA screw clamps
NEW
High-performance clamp SGTM, large throat depth
Claw clamp GRA Pressure piece GRD Frame clamp KS
3
BESSEY Clamping Technology
Table of contents 58-61
Mini Vice S 10 Table clamp TK
One-handed clamps
One-handed clamp EHZ – with 2-component plastic handle
69-71
75-77
VarioClippix XV
85
78-79
Accessorie: Extender DKX Clippix XC
Angle and mitre clamps
Pipe clamping set
Pipe clamping set BPC
Band clamp BAN 700, BAN 400 Vario corners BVE
Spring clamps
DuoKlamp DUO
Band clamps and ratchet straps
86-87
Seaming tools
Angle clamp WS 3, WS 6, WS 1
Seaming tool PS 130, big and strong
Mitre clamp GS Mitre clamping system MCX
Seaming tool PS 55
One-handed clamp EZS
62-68
Clippix XCL, Needle nose spring clamp
Lightweight clamps
80-81 KliKlamp KLI
72-74
Edge clamps
Rafter clamps
Rafter clamp SPZ
88-89
Special flooring tools Spacer AV2
One-handed edge clamp EKT Light duty bar clamp U-style LMU 82-85 Edge clamp Kantenfix KF Die-cast zinc screw clamp LM
Door frame and window assembly tools Door frame clamp TU, TMS
Spacer PVA
Flooring clamp PVZ
Edge clamp KT Wood-Klemmy HKL
C-frame edge clamp KT, CKT Aluminium mini clamp AM
Door frame straightening clamp TFM / Angle door frame straightening clamp WTR Window installation clamp FRK
Panel carrier KFP Parallel screw clamp PA
4
Sash clamp TAN, TB
Flooring and clamping system SVH, SVG
BESSEY Clamping Technology
Table of contents 90-97
Horizontal toggle clamp STC-HH – with horizontal base plate
NEW
NEW
Hold down table clamp BSG
Toggle clamps
104-105 Metal angle clamps
Earth (ground) clamp CP
109-113 Accessories
Pressure plates for high-performance clamps – X-pressure plate – V-pressure plate Protection cap set
Horizontal toggle clamp STC-HV – with vertical base plate
Welders‘ angle clamps WSM
Multi angle pad VAD
Horizontal toggle clamp STC-HA – with angled base plate
Welding clamp set SM 10
Pipe clamping set RO
DuoKlamp Extender DKX
2-component plastic handle
Table clamp TK
Push/pull clamp STC-IHH – with horizontal base plate
Pressure cap strips SKS
106-107 Grip pliers
Parallel grip GRZ
NEW
Push/pull clamp STC-IHA – with angled base plate
Wooden handle C-grip GRZC
98-103 Machine table clamps
Variogrip GRZV
Machine table clampBAS-C, BAS-CB
Tommy bar accessory KA
Accessories for K Body REVO: Variable jaw KR-VO Adapter KR-AS Framing set KP Extender KBX
114-115 Product displays
Clamp trolley ZW, VFW Pipe grip GRZRO
Base unit BASO
Complete spindle set STC
Wrench with T-bar BASKN
Hold down table clamp BS
Claw machine clamp GRS
Replaceable pressure plate 108
Earth (ground) clamps Earth (ground) clamp LP, TP, TGP
Clamping force indicator FIN
5
BESSEY Cutting Technology
Table of contents 116-125
C ompound leverage snips
hape and straight S cutting snips D29ASS-2/D27A/D17A/D08
hape cutting snips S D29SS-2/D27
Punch snips HSS D407
Universal snips with wide blades D106A
Shape and straight cutting snips HSS D416
B erlin pattern snips D202/D102
Pelican snips HSS D418
English pattern snips D159
traight cutting snips S D29BSS-2/D27B 132-137
MULTISNIP Longstyle D22A
Aviaton snips D16/D16L/D16S
126-127
Allround snips
hape and straight S cutting snips D15A
128-131
High-performance snips with HSS edges
S hape and straight cutting snips D216/D116
Steel strap cutters
S afety strap cutter with compound leverage D123S
Shape cutting punch snips D214/D114
S teel strap cutters D122N/D122A
P unch snips D207/D107
P unch snips with curved blades D208
Universal snips D206/D106
6
138-139
Pelican snips D218/D118
hape and straight S cutting snips HSS-TiN D27AH-TiN
hape and straight S cutting snips HSS D27AH
A merican pattern snips D146
Standard tin snips
140
Nibbler
N ibbler with cutting-off function D24
BESSEY Cutting Technology
Table of contents 141-143
Bladed jack knife DBKPH/DBKWH/DBKAH
Multi-purpose cutters
Spare blades DBK-T/DBK-H/DBK-L/DBK-A
Multi-purpose cutters D47-2/D48-2/D48A-2 146-147
Jewellers’ snips D70/D71/D72/D73/ D74/D75/D76/D77
Cable cutter D49-2
MULTISNIP Master D51A
148-149
H ousehold and multi-purpose shears
M ini folding pliers D331-22/D341-22
F lat-nosed pliers for sheet metal work D301
Round nosed pliers D311
M ulti-purpose shears D820/D821
Multi-purpose cutters D47/D48/D48A
F olding pliers D355 E lectricians’ scissors D53
Cable cutter D49
H ousehold and dressmakers’ shears D840
Combinox D50
144-145
J ewellers’ and thin sheet snips
Seaming and clinching pliers D33...P/D331...P/ D34...P/D341...P/ D35...P/D351...P
Corner seaming and clinching pliers D335
S queeze folding pliers D336 P aperhangers’ and paper shears D851/D853
Multitool and folding utility knives
C rimper D36 I ndustrial and professional shears D860
Multitool DMT
G utter support bowing pliers D396 Knife-set DBKPH
150-153
Tools for sheet metal work and plumbing
Seaming and clinching pliers D33/D331/ D34/D341/ D35/D351
57
BESSEY. Simply better. Best Clamping- and Cutting Technology since 1889. “One, who stops improving himself, has already ceased to be good” – we behave and work as per this guiding principle of Max Bessey, the founder of our company. Again and again. Over 120 years already. Simply go and see for yourself: An overview of our entire range of products – and services is given in the following pages. Be it clamping – or cutting technology, Bessey offers incomparably innovative solutions with the proven BESSEY quality. Make the most of our innovative edge and experience why the following still holds true in our industry: “BESSEY. Simply better.”
All BESSEY products are traditionally manufactured using the highest quality materials.
Functionality, precision and durability reflect the best BESSEY quality.
8
Most innovative ideas Our company has been setting new benchmarks in the field of clamping- and cutting technology since its 足inception in the year 1889. Based on our expertise in development, we have been working on new and 足innovative ideas and for their continuous improvement. We invent and perfect the patented brands in our plant in Bietigheim, which often become models for an entire generation of clamping- and cutting tools. Often copied, but never matched: This applies to, e.g. Original BESSEY malleable cast iron-screw clamps that are being used in the unmodified form since 1936. Or even to the Original BESSEY all-steel-screw clamps that were patented in 1952 and acted as a model for the OMEGA-screw clamps. The same commitment to innovation and improvement applies to the Erdi brand of snips by BESSEY. After the initial integration of Diener Werkzeugfabrik GmbH (established in 1923), and the high performance snips that were produced, BESSEY has made continuous advances in the newly acquired cutting technology. Examples would include high performance snips with HSS inlays or the new D15A multi-purpose snip which is small yet strong and very manoeuvrable. These examples are indicative of the excellent cutting performance and safety that you get when you trust in BESSEY cutting technology.
Technological edge due to innovative ideas and highest quality makes the BESSEY brand unique.
9
BESSEY. Simply better. Highest quality Our fundamental principle: BESSEY brands have been manufactured for constant loads, and not for tem-poÂrary ones. As against the comparable products of our competitors, we have distinguished ourselves and earned the respect of customers for decades owing to our unrivalled quality. Our brands are traditionally manufactured using the highest quality materials, from Original BESSEY preci-sion steel from the in-house steeldrawing works to fibreglass-reinforced polyamide or magnesium. Moreover, all components are personally checked by our experienced technicians and developers. The most advanced inspection procedures and testing methods, specially developed software as well as strict functional – and durability tests of parts that are subjected to severe stresses pay off especially in this case. Especially for you as a customer in daily, practical use. Besides, we always guarantee you maximum comfort, safety, user-friendliness and ergonomics. Numerous certificates as well as longstanding partners and customers in more than 100 countries all over the world are the best proof. However, we request you to test the same practically.
Experienced technicians and developers personally check every BESSEY product.
10
Wide range of products and services While browsing through this catalogue, you will observe that: BESSEY always offers you the best solution for all your tasks and applications. In clamping- as well as cutting technology. Owing to our unique and wide range of products and services. Customised as per your special requirements and needs. From rigid to flexible clamping, from curved to straight cutting. From heavy dutyclamps to light lever clamps, from delicate Jewellers‘ snips to powerful safety strap cutters. Since all wishes are fulfilled – you can work more quickly, neatly, safely and precisely in future. Personal Service Reliability, confidence and sense of responsibility are the backbone of our partnership with the environment and customers. BESSEY has distinguished itself as an extremely service-oriented and futuristic company. For a long time, we have been working towards manufacturing exclusive and practical brands that will simplify your life considerably. Today – as well as tomorrow. Of late, we have started supporting our trading partners with comprehensive product training programs in a personal and informal atmosphere. Directly on-site in Bietigheim, in our in-house training centre. This is clearly a complete partnership.
Longstanding global partners and customers in more than 100 countries have faith in the best BESSEY quality.
11
BESSEY Clamping Technology
OMEGA screw clamp
All-steel screw clamp
Lever clamp
Fitters‘ clamp SLM
High-performance clamp SGM
High-performance clamp, heavy duty STBM / STBS
High-performance clamp, extremely heavy duty STBVC
U-shaped clamp
Catalogue page
23
29
32–33
37
40
40
41
42
45
Wood
–
Wood
Wood
–
Steel
Wood
–
Sensitive materials
Wood
–
Plastic
Steel
–
Steel
Steel
–
Plastic
Plastic
–
Plastic
Sensitive materials
–
Sensitive materials
Heavy duty malleable cast iron screw clamp
17–22 17–22
Malleable cast iron screw clamp
Product group
1. Materials
Deep throat screw clamp
Orientation matrix
Fixing operations
Bonding operations using quick-hardening sizing agents
Bolting operations using metal profiles
Bonding operations
Bolting operations using wooden profiles
Connecting ceiling rafters and wooden beams Connecting U-, T-, double-T-profiles 2. Applications
Welding operations
Clamping sensitive surfaces
Aligning metal girders (vibrations)
Load safeguarding
Clamping onto the column-type drilling machine
Clamping onto machine tables
Clamping at a 90° angle Clamping inclined surfaces
Clamping edge strips Door- and window installation tools
3. Power
Special tools up to approximately
1,200 N clamping force
up to approximately
2,000 N clamping force
up to approximately
5,000 N clamping force
up to approximately
7,500 N clamping force
up to approximately 12,000 N clamping force
12
up to approximately 20,000 N clamping force
up to approximately 30,000 N clamping force
up to approximately 40,000 N clamping force -
70–71 73–74
77
107
105
83–84 86–87 93–97 100–103
Grip pliers
Wood Klemmy
67
Welders’ angle clamp
Light duty bar clamp
66
Hold down table clamp
KliKlamp
65
Toggle clamp
One-handed clamp EZS
61
Seaming tool
DuoKlamp
60
Door frame clamp Door frame- / Window straightening clamp
One-handed clamp EHZ
59
Band clamp
UniKlamp
57
One-handed- / C-edge clamp
K-Body clamp REVO
56
VarioClippix
C-Clamps
53
13
Malleable cast iron screw clamps
Powerful, rigid clamping
The unmistakable classic Often copied, never equalled: the original malleable cast iron screw clamps from BESSEY – the classic screw clamps dating back to 1936. Unmistakable, thanks to their unique high-quality profiled rail and their characteristic malleable cast iron arms,
14
serrated for reinforcement. The integrated BESSEY anti-slip system additionally ensures maximum safety. This is why the original BESSEY malleable cast iron screw clamps have proved so successful for so many years. And so ideal for all applications where powerful, rigid clamping is required. Try them out for yourself!
The screw clamp TGK – extremely stable, especially for high clamping pressures and wide openings. The deep throat clamp TGNT – for large-scale jobs and throat depths of up to 500 mm.
15
Original BESSEY malleable cast iron screw clamp
Best only the original
3
1
2
44
16
Noticeably more comfortable
Your benefits at a glance:
The choice is yours: The original BESSEY malleable cast iron screw clamp is available in three different designs. Either with the 2-component plastic handle, the tried-and-true wooden handle, or with the robust tommy bar. The latter will allow you to complete tasks more effectively and with less fatigue. This is possible thanks to the high-quality 2-component plastic handle, which has been especially developed for use with screw clamps. New pressure plates, which can be replaced without tools, add versatility to your clamp as well as making repairs quick & easy. Feel the difference!
1 Integrated BESSEY anti-slip system Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. 2 Reinforced malleable cast iron arms The characteristic high-quality malleable cast iron fixed and sliding arms, with specially designed wave profile to minimise flexing and provide maximum clamping force. The powder coating provides additional protection against corrosion.
3 High-quality profiled rail The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping. 4 Pressure plate For enhanced serviceability the pressure plate can be changed quickly and easily with no need for tools. It can be replaced very easily and quickly with a special larger-surface pressure plate or one made of stainless steel.
Malleable cast iron screw clamps
Original BESSEY malleable cast iron screw clamp TG with 2-component plastic handle
TG10-2K TG12-2K TG16-2K TG20B8-2K TG25B8-2K TG30B8-2K TG40B8-2K TG20-2K TG25S10-2K TG30S10-2K TG40S10-2K TG50S10-2K TG25-2K TG30S12-2K TG40S12-2K TG50S12-2K TG60S12-2K TG80S12-2K TG100S12-2K TG30-2K TG40S14-2K TG50S14-2K TG60S14-2K TG80S14-2K TG100S14-2K TG40-2K TG50S17-2K TG60S17-2K TG80S17-2K TG100S17-2K
mm
100 120 160 200 250 300 400 200 250 300 400 500 250 300 400 500 600 800 1000 300 400 500 600 800 1000 400 500 600 800 1000
mm
50 60 80 80 80 80 80 100 100 100 100 100 120 120 120 120 120 120 120 140 140 140 140 140 140 175 175 175 175 175
mm
15 x 5 20 x 5 25 x 6 25 x 6 25 x 6 25 x 6 25 x 6 27 x 7 27 x 7 27 x 7 27 x 7 27 x 7 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10
kg
0.26 0.42 0.66 0.77 0.82 0.87 0.97 1.06 1.15 1.18 1.33 1.46 1.54 1.63 1.78 2.01 2.13 2.46 2.83 2.20 2.41 2.62 2.85 3.29 3.71 2.70 2.90 3.20 3.50 4.03
qty.
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 10 5 5 5 5 5 5 1 1 1 1
VB0001
■ ■ ■
■ ■ ■
Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replace by hand – no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth)
Heavy duty malleable cast iron screw clamp TGK with 2-component plastic handle
TGK40-2K TGK50-2K TGK60-2K TGK80-2K TGK100-2K TGK125-2K TGK150-2K TGK200-2K TGK250-2K TGK300-2K
mm
400 500 600 800 1000 1250 1500 2000 2500 3000
mm
120 120 120 120 120 120 120 120 120 120
mm
35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11
kg
2.52 2.70 3.00 3.53 4.00 4.69 5.38 6.66 7.94 9.22
qty.
5 5 5 5 5 1 1 1 1 1
VB0001
■ ■
■ ■ ■
You will find accessories on page 109
■
Clamping force up to 7,000 N Strengthened design for higher clamping force and wider opening widths High-quality 2-component plastic handle Pressure plates can be replaced by hand – no tools required Stable profiled rail with serration BESSEY anti-slip system 17
Malleable cast iron screw clamps
Original BESSEY malleable cast iron screw clamp TG with tried-and-true wooden handle
■ ■ ■
■ ■ ■
Clamping force up to 6,000 N Ergonomically shaped wood handle Pressure plates can be replaced by hand – no tools required (from 80 mm throat depth) With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system (from 80 mm throat depth)
TG10 TG15B5 TG20B5 TG12 TG20B6 TG30B6 TG16 TG20B8 TG25B8 TG30B8 TG40B8 TG20 TG25S10 TG30S10 TG40S10 TG50S10 TG25 TG30S12 TG40S12 TG50S12 TG60S12 TG80S12 TG100S12 TG30 TG40S14 TG50S14 TG60S14 TG80S14 TG100S14 TG40 TG50S17 TG60S17 TG80S17 TG100S17
mm
100 150 200 120 200 300 160 200 250 300 400 200 250 300 400 500 250 300 400 500 600 800 1000 300 400 500 600 800 1000 400 500 600 800 1000
mm
50 50 50 60 60 60 80 80 80 80 80 100 100 100 100 100 120 120 120 120 120 120 120 140 140 140 140 140 140 175 175 175 175 175
You will find accessories on page 109 18
mm
15 x 5 15 x 5 15 x 5 20 x 5 20 x 5 20 x 5 25 x 6 25 x 6 25 x 6 25 x 6 25 x 6 27 x 7 27 x 7 27 x 7 27 x 7 27 x 7 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10
kg
0.26 0.29 0.33 0.42 0.49 0.56 0.66 0.77 0.82 0.87 0.97 1.06 1.15 1.18 1.33 1.46 1.54 1.63 1.78 2.01 2.13 2.46 2.83 2.20 2.41 2.62 2.85 3.29 3.71 2.70 2.90 3.20 3.50 4.03
qty.
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 10 5 5 5 5 5 5 1 1 1 1
VB0001
Malleable cast iron screw clamps
Heavy duty malleable cast iron screw clamp TGK with tried-and-true wooden handle ■
TGK40 TGK50 TGK60 TGK80 TGK100 TGK125 TGK150 TGK200 TGK250 TGK300
mm
400 500 600 800 1000 1250 1500 2000 2500 3000
mm
120 120 120 120 120 120 120 120 120 120
mm
35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11
kg
2.52 2.70 3.00 3.53 4.00 4.69 5.38 6.66 7.94 9.22
qty.
5 5 5 5 5 1 1 1 1 1
VB0001
■
■ ■ ■ ■
Clamping force up to 7,000 N Heavy duty, reinforced design for higher clamping force and wider opening widths Ergonomically shaped wood handle Pressure plates can be replaced by hand – no tools required Stable profiled rail with serration BESSEY anti-slip system
Original BESSEY malleable cast iron screw clamp TG with tommy bar ■
TG16K TG20K TG25K TG30S12K TG40S12K TG60S12K TG30K TG40K
mm
160 200 250 300 400 600 300 400
mm
80 100 120 120 120 120 140 175
mm
25 x 6 27 x 7 29 x 9 29 x 9 29 x 9 29 x 9 32 x 10 32 x 10
kg
0.73 1.08 1.48 1.57 1.74 2.09 2.10 2.70
qty.
10 10 10 10 10 5 10 5
VB0001
■ ■ ■ ■ ■
Clamping force up to 6,000 N Tommy bar with rounded ends for simple transfer of force when clamping Pressure plates can be replaced by hand – no tools required With protective caps on the clamping surfaces Stable profiled rail with serration BESSEY anti-slip system
Heavy duty malleable cast iron screw clamp TGK with tommy bar ■
TGK50K TGK100K TGK150K TGK200K TGK250K TGK300K
mm
500 1000 1500 2000 2500 3000
mm
120 120 120 120 120 120
mm
35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11
kg
2.70 4.00 5.31 6.50 7.83 9.13
qty.
5 5 1 1 1 1
VB0001
■
■ ■ ■ ■
Clamping force up to 7,000 N Strengthened design for higher clamping force and wider opening widths Tommy bar with rounded ends for simple transfer of force when clamping Pressure plates can be replaced by hand – no tools required Stable profiled rail with serration BESSEY anti-slip system
You will find accessories on page 109 19
Malleable cast iron screw clamps
Malleable cast iron screw clamp TPN with 2-component plastic handle ■ ■ ■ ■
Clamping force up to 5,500 N High-quality 2-component plastic handle With protective caps on the clamping surfaces Stable profiled rail with serration
TPN16BE-2K TPN20BE-2K TPN25BE-2K TPN40S12BE-2K TPN50S12BE-2K TPN60S12BE-2K TPN80S12BE-2K TP100S12BE-2K TPN30BE-2K TPN40BE-2K
mm
160 200 250 400 500 600 800 1000 300 400
mm
80 100 120 120 120 120 120 120 140 175
mm
25 x 6 27 x 7 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 32 x 10 32 x 10
kg
qty.
VB0001
kg
qty.
VB0001
0.73 1.06 1.50 1.74 2.00 2.10 2.50 2.80 2.03 2.70
10 10 10 10 10 5 5 5 10 5
Malleable cast iron screw clamp TPN with tried-and-true wooden handle
■ ■ ■ ■
Clamping force up to 5,500 N Ergonomically shaped wood handle With protective caps on the clamping surfaces Stable profiled rail with serration
TPN10BE TPN15B5BE TPN20B5BE TPN12BE TPN20B6BE TPN16BE TPN20B8BE TPN25B8BE TPN30B8BE TPN20BE TPN25S10BE TPN30S10BE TPN40S10BE TPN25BE TPN30S12BE TPN40S12BE TPN50S12BE TPN60S12BE TPN80S12BE TP100S12BE TPN30BE TPN50S14BE TPN60S14BE TPN80S14BE TP100S14BE TPN40BE
mm
100 150 200 120 200 160 200 250 300 200 250 300 400 250 300 400 500 600 800 1000 300 500 600 800 1000 400
mm
50 50 50 60 60 80 80 80 80 100 100 100 100 120 120 120 120 120 120 120 140 140 140 140 140 175
You will find accessories on page 109 20
mm
15 x 5 15 x 5 15 x 5 20 x 5 20 x 5 25 x 6 25 x 6 25 x 6 25 x 6 27 x 7 27 x 7 27 x 7 27 x 7 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 29 x 9 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10
0.26 0.29 0.31 0.40 0.45 0.73 0.77 0.84 0.87 1.06 1.14 1.22 1.31 1.50 1.60 1.74 2.00 2.10 2.50 2.80 2.03 2.48 2.66 3.12 3.62 2.70
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 10 5 5 5 5 5
Malleable cast iron screw clamps
Heavy duty malleable cast iron screw clamp TKPN with tried-and-true wooden handle ■
TKPN50BE TKPN60BE TKPN80BE TKPN100BE TKPN125BE TKPN150BE TKPN200BE
mm
500 600 800 1000 1250 1500 2000
mm
120 120 120 120 120 120 120
mm
35 35 35 35 35 35 35
x 11 x 11 x 11 x 11 x 11 x 11 x 11
kg
2.70 2.97 3.48 4.05 4.65 5.34 6.67
qty.
5 5 5 5 1 1 1
VB0001
■
■ ■
Clamping force up to 6,500 N Strengthened design for higher clamping force and wider opening widths Ergonomically shaped wood handle Stable profiled rail with serration
Malleable cast iron screw clamp TGRC with tried-and-true wooden handle
TGRC10 TGRC15B5 TGRC20B5 TGRC12 TGRC20B6 TGRC16 TGRC20B8 TGRC25B8 TGRC30B8 TGRC20 TGRC25S10 TGRC30S10 TGRC40S10 TGRC25 TGRC30S12 TGRC40S12 TGRC50S12 TGRC60S12 TGRC80S12 TGRC100S12 TGRC30 TGRC40S14 TGRC50S14 TGRC60S14 TGRC80S14 TGRC100S14 TGRC40 TGRC50S17 TGRC60S17 TGRC80S17 TGRC100S17
mm
100 150 200 120 200 160 200 250 300 200 250 300 400 250 300 400 500 600 800 1000 300 400 500 600 800 1000 400 500 600 800 1000
mm
50 50 50 60 60 80 80 80 80 100 100 100 100 120 120 120 120 120 120 120 140 140 140 140 140 140 175 175 175 175 175
mm
15 x 5 15 x 5 15 x 5 20 x 5 20 x 5 25 x 6 25 x 6 25 x 6 25 x 6 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9
kg
0.26 0.29 0.31 0.43 0.49 0.73 0.77 0.82 0.87 1.33 1.40 1.48 1.65 1.52 1.60 1.76 2.01 2.13 2.52 2.84 2.10 2.40 2.71 2.92 3.43 3.78 2.67 2.99 3.17 3.50 4.00
qty.
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 10 5 5 5 5 5 5 1 1 1 1
VB0001
■ ■ ■ ■
Clamping force up to 5,500 N Ergonomically shaped wood handle With protective caps on the clamping surfaces Stable solid flat rail with serration
You will find accessories on page 109 21
Malleable cast iron screw clamps
Heavy duty malleable cast iron screw clamp TGKR with tried-and-true wooden handle ■ ■
■ ■
Clamping force up to 6,500 N Strengthened design for higher clamping force and wider opening widths Ergonomically shaped wood handle Stable solid flat rail with serration
TGKR50 TGKR60 TGKR80 TGKR100 TGKR125 TGKR150 TGKR200
mm
500 600 800 1000 1250 1500 2000
mm
120 120 120 120 120 120 120
mm
35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11
kg
qty.
VB0001
kg
qty.
VB0001
2.70 2.90 3.50 4.00 4.70 5.20 6.50
5 5 5 5 1 1 1
Malleable cast iron screw clamp TGRC with tommy bar ■ ■ ■ ■
Clamping force up to 5,500 N Tommy bar with rounded ends for simple transfer of force when clamping With protective caps on the clamping surfaces Stable solid flat rail with serration
TRC20KF TRC25S10KF TRC30S10KF TRC40S10KF TRC50S10KF TRC25S12KF TRC30S12KF TRC40S12KF TRC50S12KF TRC60S12KF TRC80S12KF
mm
200 250 300 400 500 250 300 400 500 600 800
mm
100 100 100 100 100 120 120 120 120 120 120
You will find accessories on page 109 22
mm
30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8
1.08 1.13 1.51 1.65 1.46 1.54 1.60 1.76 2.01 2.16 2.46
10 10 10 10 10 10 10 10 10 5 5
Malleable cast iron screw clamps
Deep throat clamp TGNT with tried-and-true wooden handle
TGN30T20 TGN40T20 TGN60T20 TGN80T20 TGN100T20 TGN40T25 TGN60T25 TGN80T25 TGN100T25 TGN40T30 TGN60T30 TGN80T30 TGN100T30 TGN150T30 TGN200T30 TGN250T30 TGN40T40 TGN60T40 TGN80T40 TGN100T40 TGN30T50 TGN60T50 TGN80T50
mm
300 400 600 800 1000 400 600 800 1000 400 600 800 1000 1500 2000 2500 400 600 800 1000 300 600 800
mm
200 200 200 200 200 250 250 250 250 300 300 300 300 300 300 300 400 400 400 400 500 500 500
mm
35 35 35 35 35 40 40 40 40 45 45 45 45 45 45 45 45 45 45 45 45 45 45
x 11 x 11 x 11 x 11 x 11 x 11 x 11 x 11 x 11 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 12
kg
3.11 3.41 3.97 4.67 5.15 4.50 5.06 5.71 6.63 5.58 6.41 7.39 8.10 10.50 12.80 15.10 6.70 7.69 8.41 9.34 8.11 9.36 10.16
qty.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
VB0001
■ ■ ■ ■ ■
Clamping force up to 7,000 N Heavy-duty design Ergonomically shaped wood handle Large, stable solid flat rail with serration Throat depths to max. 500 mm
Deep throat screw clamp TGNT with tommy bar ■
TGN30T20K TGN40T20K TGN40T25K TGN60T25K TGN80T25K TGN40T30K TGN60T30K TGN80T30K TGN40T40K TGN60T40K TGN80T40K TGN30T50K TGN60T50K TGN80T50K
mm
300 400 400 600 800 400 600 800 400 600 800 300 600 800
mm
200 200 250 250 250 300 300 300 400 400 400 500 500 500
mm
kg
35 x 11 3.05 35 x 11 3.21 40 x 11 4.36 40 x 11 4.98 40 x 11 5.64 45 x 12 5.53 45 x 12 6.29 45 x 12 7.15 45 x 12 6.63 45 x 12 7.52 45 x 12 8.33 45 x 12 8.01 45 x 12 9.16 45 x 12 10.01
qty.
1 1 1 1 1 1 1 1 1 1 1 1 1 1
VB0001
■ ■ ■ ■
Clamping force up to 7,000 N Heavy-duty design Large, stable solid plain rail with fluting Tommy bar with rounded ends for simple transfer of force when clamping Rail dimensions great than and equal to 40 x 11 are ungalvanized
You will find accessories on page 109 23
Pump clamps
Powerful and efficient clamping
Powerful and time-saving BESSEY pump clamps are used everywhere, where powerful and quick clamping is needed.
24
Special feature: The double spindle transmission means BESSEY pump clamps enable you to work even more quickly and more efficiently. This means you save valuable time!
The PZ pump clamp – universally applicable, for applications that demand high clamping force.
Pump clamps
Your benefits at a glance: 1 Screw mechanism The specially designed spindle mechanism ensures maximum clamping forces are achieved. The sealed unit provides additional protection to the spindle from environmental and physical damage. 2 Guided clamping bolts Clamping bolt and pressure plate are manufactured from a single piece. The clamping bolt is guided firmly in the sliding arm, so that the pressure plate cannot buckle. For even faster set up on parallel work pieces. 3 Integrated BESSEY anti-slip system Maximum safety is guaranteed with the integrated BESSEY anti-slip system. A hardened set screw molded into the sliding arm grips the serrations in the rail. This effectively prevents the clamp from dislodging or slipping away. 4 Stable solid plain rail The BESSEY solid plain rail from our own drawing mill is particularly stable. The serrations also serve to prevent the clamp from slipping.
Pump clamp PZ
PZ30S10K PZ40S10K PZ60S10K PZ80S10K PZ100S10K PZ120S10K PZ30S15K PZ40S15K PZ60S15K PZ80S15K PZ100S15K PZ120S15K PZ150S15K
mm
300 400 600 800 1000 1200 300 400 600 800 1000 1200 1500
mm
100 100 100 100 100 100 150 150 150 150 150 150 150
mm
30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 30 x 8 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9 35 x 9
kg
1.70 1.90 2.30 2.70 3.10 3.50 2.40 2.60 3.10 3.50 4.00 4.50 5.20
qty.
10 10 5 5 5 5 10 10 5 5 5 5 5
VB0003
■ ■ ■ ■ ■
Clamping force up to 8,000 N Double spindle mechanism for quick clamping and release Guided, flat clamping bolt for parallel clamping With protective caps on the clamping surfaces BESSEY anti-slip system
25
OMEGA screw clamps
It's safe to say that it will give you maximum versatility during clamping
Setting new standards in terms of flexibility and safety The OMEGA screw clamp GMZ offers you maximum flexibility and safety for day-to-day workshop use, and on the construction site. Its unique, patented OMEGA bend maintains the clamping pressure even
26
when the all-steel screw clamp is shaken by vibrations. It also ensures that sensitive surfaces receive the necessary protection because the clamping pressure can be selected even more precisely. Universally applicable – for both wood and metalworking. That's safe to say!
The OMEGA screw clamp GMZ – universally applicable, for everything from wood to metal processing. Unique, patented OMEGA bend – low losses of clamping pressure, even when strong vibrations are present.
27
OMEGA screw clamp GMZ
It has a reserve of power, with the patented OMEGA bend
4
2
Clamping force [N]
3 The load-displacement diagram shows: the OMEGA screw clamp maintains the clamping force significantly longer under vibration.
1
100%
Malleable cast iron screw clamp TG All-steel screw clamp GZ OMEGA screw clamp GMZ
80%
60%
3
-14% (GMZ)
40% -17% (GZ)
20% -25% (TG)
0% 0
28
5
10
15
20
25
30
35
Spindle height reduction [mm]
Greater safety with the OMEGA-bend
Your benefits at a glance:
The unique, patented OMEGA-bend increases the spring deflection of the OMEGA-screw clamp. The decrease in pressure at the point of clamping (...per spindle rotation) is significantly lower with the BESSEY OMEGA clamp than with a comparable malleable cast iron or all-steel screw clamp (see diagram). That means that, even when vibrations are present, this clamp will maintain its clamping pressure longer than a conventional screw, thereby offering greater working safety. Don't settle for less!
1 Innovative OMEGA bend The patented OMEGA bend gives you added safety. It means you lose even less clamping pressure, even when vibrations are present. 2 Versatility Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and strong.
3 Close flat clamping The OMEGA bend allows you to place the clamp absolutely flat to the surface of the work piece. This allows clamping right into the corners. 4 Pressure plate For enhanced serviceability the pressure plate can be changed quickly and easily with no need for tools. It can be replaced very easily and quickly with a special larger-surface pressure plate or one made of stainless steel.
OMEGA screw clamps
OMEGA screw clamp GMZ with 2-component plastic handle
GM16Z-2K GM20Z-2K GM25Z-2K GM30Z-2K GM40Z-2K GM50Z-2K GM60Z-2K
mm
160 200 250 300 400 500 600
mm
80 100 120 140 120 120 120
mm
16 x 7,5 19,5 x 9,5 22 x 10,5 25 x 12 25 x 12 25 x 12 25 x 12
kg
0.57 0.94 1.35 1.91 2.13 2.33 2.55
qty.
10 10 10 10 10 5 5
VB0002
■ ■ ■ ■
■
Clamping force up to 5,000 N High-quality 2-component plastic handle Pressure plates can be replaced with no need for tools Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping Universally applicable within the fields of wood and metal processing
OMEGA-screw clamp GMZ with tommy bar ■
GM20ZK GM25ZK GM30ZK GM40ZK GM50ZK GM60ZK
mm
200 250 300 400 500 600
mm
100 120 140 120 120 120
mm
19,5 x 9,5 22 x 10,5 25 x 12 25 x 12 25 x 12 25 x 12
kg
0.88 1.25 1.84 2.00 2.22 2.44
qty.
10 10 10 10 5 5
VB0002
■
■ ■ ■
Clamping force up to 5,000 N Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping Tommy bar with rounded ends for simple transfer of force when clamping Pressure plates can be replaced by hand – no tools required Universally applicable within the fields of wood and metal processing
You will find accessories on page 109 29
All-steel screw clamps
Clamp resiliently, elastically and powerfully
The inspiration for many innovative clamping tools The original BESSEY all-steel screw clamps are the perfect step up from the original BESSEY malleable cast iron screw clamps. They clamp resiliently and elastically, making them an essential aid when you want your tools to cover a wide range of applications. In addition, the all-steel screw clamp is a model for many other innovative BESSEY clamping tools – e.g. lever clamps, high-performance clamps, area pressure clamps, one-handed clamps and
30
rafter clamps. BESSEY has stepped up to the challenge and brought the all-steel screw clamp range, which has been manufactured almost unchanged since 1952, right up to date. On the one hand, rail profiles and sliding arms have been optimised, and on the other hand, all of the models have been equipped with replaceable pressure plates. This means the new original BESSEY allsteel screw clamps are able to help you work more quickly, powerfully and flexibly – try them out for yourself!
The all-steel screw clamp GZ – Universally applicable, for everything from wood to metal. Whether you choose the 2-component plastic handle, the wooden handle or the tommy bar, any task is now well within your grasp.
Original BESSEY all-steel screw clamp
BESSEY's unrivalled all-steel quality
3 3
2
4
3
20% more clamping force per spindle rotation
1
Competitor
Your benefits at a glance: 1 High stability The optimised profile guarantees high clamping force build-up in the shortest time, while maintaining maximum stability and safety. The fixed bracket and pressure plate are manufactured in a single piece, and tempered, so are able to bear heavy loads and are resistant to torsion. 2 Forged sliding arm The sliding arm allows for more efficient transfer of force. As a result of its more linear transfer of force, the new U-shaped sliding arm offers maximum security with the heaviest of loads. You can rely on that.
3 Pressure plate For enhanced serviceability the pressure plate can be changed quickly and easily with no need for tools. It can be replaced very easily and quickly with a special larger-surface pressure plate or one made of stainless steel. 4 Smooth-running spindle The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work.
Original BESSEY GZ clamp
Light, easy to handle and strong Whether you choose the 2-component plastic handle, the wooden handle or the tommy bar, you're guaranteed satisfaction if you opt for an original BESSEY allsteel screw clamp. Especially thanks to BESSEY unique quality steel. With BESSEY you can be sure of an extremely high-quality, durable clamping tool which is also light and easy-to-handle. Even at the high clamping force, it will retain its dimensions and resist distortion. So in future, if you are looking for a powerful, flexible clamping effect, then what you need is a BESSEY all-steel screw clamp!
31
All-steel screw clamps
Original BESSEY all-steel screw clamp GZ with 2-component plastic handle
■ ■ ■ ■ ■
■
20 % more clamping force per spindle rotation with optimised rail profile Maximum security with linear transfer of force at the sliding arm Clamping force up to 6,000 N High-quality 2-component plastic handle Pressure plates can be replaced by hand – no need for tools (from 80 mm width) Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping
GZ10-2K GZ12-2K GZ16-2K GZ40-8-2K GZ20-2K GZ25-2K GZ30-12-2K GZ40-12-2K GZ50-12-2K GZ60-12-2K GZ80-12-2K GZ100-12-2K GZ30-2K GZ40-2K GZ50-2K GZ60-2K GZ80-2K GZ100-2K GZ125-2K
mm
100 120 160 400 200 250 300 400 500 600 800 1000 300 400 500 600 800 1000 1250
mm
60 60 80 80 100 120 120 120 120 120 120 120 140 120 120 120 120 120 120
mm
15 x 6 15 x 6 17,5 x 6,8 17,5 x 6,8 22 x 8,5 24,5 x 9,5 24,5 x 9,5 24,5 x 9,5 24,5 x 9,5 24,5 x 9,5 24,5 x 9,5 24,5 x 9,5 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11
kg
qty.
VB0002
kg
qty.
VB0002
0.31 0.32 0.57 0.76 1.01 1.42 1.50 1.65 1.83 2.00 2.20 2.45 2.01 2.12 2.33 2.52 2.87 3.29 3.83
10 10 10 10 10 10 10 10 10 5 5 5 10 10 5 5 5 5 1
Original BESSEY all-steel screw clamp GZ with tried-and-tested wooden handle
■ ■ ■ ■
■ ■
32
20 % more clamping force per spindle rotation with optimised rail profile Maximum security with linear transfer of force at the sliding arm Clamping force up to 6,000 N Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping Ergonomically shaped wood handle Pressure plates can be replaced by hand – no need for tools (from 80 mm width)
GZ10 GZ12 GZ30-6 GZ16 GZ20 GZ25 GZ30-12 GZ40-12 GZ30 GZ40 GZ50 GZ60 GZ80 GZ100 GZ125
mm
100 120 300 160 200 250 300 400 300 400 500 600 800 1000 1250
mm
60 60 60 80 100 120 120 120 140 120 120 120 120 120 120
mm
15 x 6 15 x 6 15 x 6 17,5 x 6,8 22 x 8,5 24,5 x 9,5 24,5 x 9,5 24,5 x 9,5 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11
0.30 0.31 0.42 0.52 0.95 1.34 1.43 1.56 1.96 2.06 2.27 2.47 2.82 3.22 3.77
10 10 10 10 10 10 10 10 10 10 5 5 5 5 1
All-steel screw clamps
Original BESSEY all-steel screw clamp GZ with tommy bar ■
GZ16K GZ20K GZ25K GZ30K GZ40K GZ50K GZ60K GZ80K GZ100K GZ125K NEW
mm
160 200 250 300 400 500 600 800 1000 1250
mm
80 100 120 140 120 120 120 120 120 120
mm
17,5 x 6,8 22 x 8,5 24,5 x 9,5 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11
kg
0.50 0.93 1.31 1.89 2.00 2.20 2.42 2.16 3.18 3.65
qty.
10 10 10 10 10 5 5 5 5 1
VB0002
■ ■ ■
■ ■
20 % more clamping force per spindle rotation with optimised rail profile Maximum security with linear transfer of force at the sliding arm Clamping force up to 6,000 N Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping Tommy bar with rounded ends for simple transfer of force when clamping Pressure plates can be replaced by hand – no need for tools
All-steel screw clamp classiX GS with tried-and-tested wooden handle
GS10 GS12 GS16 GS20 GS25 GS30 GS40 GS50 GS60 GS80 GS100
mm
100 120 160 200 250 300 400 500 600 800 1000
mm
50 60 80 100 120 140 120 120 120 120 120
mm
11,5 x 5,6 13,5 x 5,6 16 x 7,5 19,5 x 9,5 22 x 10,5 25 x 12 25 x 12 25 x 12 25 x 12 27 x 13 27 x 13
kg
0.20 0.30 0.48 0.83 1.30 1.85 1.95 2.20 2.40 3.20 3.65
qty.
10 10 10 10 10 10 10 5 5 5 5
VB0002
■ ■
■
NEW
Clamping force up to 5,000 N Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping Ergonomically shaped wood handle
All-steel screw clamp classiX GS with tommy bar
GS16K GS20K GS25K GS30K GS40K GS50K GS60K GS80K GS100K
mm
160 200 250 300 400 500 600 800 1000
mm
80 100 120 140 120 120 120 120 120
mm
16 x 7,5 19,5 x 9,5 22 x 10,5 25 x 12 25 x 12 25 x 12 25 x 12 27 x 13 27 x 13
kg
0.46 0.83 1.20 1.79 1.95 2.17 2.37 3.11 3.58
qty.
10 10 10 10 10 5 5 5 5
VB0002
■ ■
■
Clamping force up to 5,000 N Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping Tommy bar with rounded ends for simple transfer of force when clamping
You will find accessories on page 109 33
Lever clamps
Clamping with leverage
The quick, secure, powerful clamping tool The original BESSEY lever clamps are lightweight, easy to handle, dimensionally stable, and torsionresistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they
34
can quickly produce large clamping pressures. In addition, the optimised rail profile with greater reserves of force enables a more even application of force – especially under full utilisation of clamping range. The original BESSEY lever clamps are particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibration. Try it out!
The lever clamp GH – allows you to clamp up to 5 x faster than with conventional clamps. The SGHS lever clamp – the heavy duty version with a clamping force of up to 9,500 N.
35
Lever clamps
Speed, safety and strength
Your benefits at a glance: 1 Secure ratchet mechanism The ratchet mechanism ensures rapid, controlled, vibration-free clamping. A hardened cam at the end of the lever ensures a long service life. 2 Extremely sturdy The optimised profile shape, with greater reserves of force, enables a more even application of force especially under full utilisation of clamping range. The fixed bracket and pressure plate are produced and tempered from a single piece, thus they are very torsion-resistant.
36
3 Forged sliding arm The sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. 4 Ergonomic clamping and release lever The powder-coated clamping lever has a particularly ergonomic shape. The plastic-coated non-slip release lever provides a secure hold as you release the clamp.
Lever clamps
Lever clamp GH
GH12 GH16 GH20 GH25 GH30-12 GH40-12 GH30 GH40 GH50 GH60 GH80 GH100
mm
120 160 200 250 300 400 300 400 500 600 800 1000
mm
60 80 100 120 120 120 140 120 120 120 120 120
mm
15 x 6 17,5 x 6,8 22 x 8,5 24,5 x 9,5 24,5 x 9,5 24,5 x 9,5 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11 28 x 11
kg
0.49 0.64 1.11 1.44 1.51 1.75 2.27 2.41 2.61 2.84 3.20 3.59
qty.
10 10 10 10 10 10 10 10 5 5 5 5
VB0002
■
■ ■ ■ ■
Greater reserves of power, thanks to optimised rail profile, for even clamping force build-up, especially under maximum utilisation of the clamping range Non-slip trigger release Quick – up to 5 x faster than regular clamps Secure – vibration resistant Strong – clamping force up to 8,500 N
Lever clamp SGHS, heavy duty
SG-25HS SG-50HS
mm
300 500
mm
140 140
mm
30 x 15 30 x 15
kg
3.05 3.83
qty.
5 5
VB0002
■ ■ ■ ■
Heavy design Rapid – up to 5 x faster than conventional clamps Secure – vibration resistant Strong – clamping force up to 9,500 N
37
High-performance clamps
High-performance clamping
Clamping force of up to 35,000 N Increasingly high clamping pressures with larger throat depths and wider openings. These are the daily requirements of the original BESSEY high Âperformance clamps. Applications include steel fabrication, welding, shipbuilding and automotive manufacturing as well as heavy timber con-
38
struction, wood laminations and general carpentry. In other words, wherever sturdy or heavy parts need to be clamped securely and with high clamping pressure. Developed on the basis of the tried-and-tested BESSEY all-steel screw clamp, the original BESSEY high-performance clamps fulfil all requirements with panache... again and again!
The high-performance clamp STBS – very sturdy and longlasting, offering exceptional clamping pressures.
High-performance clamps
High-performance clamping YouTube
20% more clamping force per spindle rotation
Competitor
Your benefits at a glance: 1 High stability The optimised profile guarantees high clamping force build-up in the shortest time, while maintaining maximum stability and safety. The fixed bracket and pressure plate are manufactured in a single piece, and tempered, so are able to bear heavy loads and are resistant to torsion. 2 Forged sliding arm The sliding arm has a shape that allows for more efficient transfer of force. As a result of its more linear transfer of force, the U-shaped sliding arm offers maximum security with the heaviest of loads. You can rely on that.
3 Special tilting pressure plate The heat-resistant pressure plate is replaceable and can be tilted up to 35째 so it can even clamp on angled or sloping surfaces. It has an extremely long service-life due to the oil-soaked sintered steel insert's excellent sliding and emergency running properties. 4 Tempered spindle The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability.
Original BESSEY SGM clamp
Improved rail profile means greater productivity The innovative shape of the BESSEY rail profile and sliding arm provide a number of productivity enhancing benefits. These benefits include more clamping force per spindle rotation and more clamping stability for faster and safer work. Moreover, the shape of the rail profile and sliding arm guarantees better contact with the work surface at higher clamping forces. The BESSEY high-performance clamp is the ideal tool for your clamping jobs, day after day.
39
High-performance clamps
Fitters' clamp SLM
SL20M SL25M SL30M SL40M SL50M SL60M ■ ■
■
■
mm
200 250 300 400 500 600
mm
120 120 120 120 120 120
mm
28 28 28 28 28 28
x 11 x 11 x 11 x 11 x 11 x 11
kg
qty.
VB0002
kg
qty.
VB0002
1.88 2.00 2.11 2.34 2.60 2.82
5 5 5 5 5 5
Clamping force up to 8,500 N at tightening torque of 25 Nm Greater reserves of power, thanks to optimised rail profile, for even clamping force build-up Maximum safety due to the better linear transfer of force of the sliding arm Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35°
High-performance clamp SGM
■ ■ ■
■
40
Clamping force up to 12,000 N at tightening torque of 40 Nm 20 % more clamping force per spindle rotation with optimised rail profile Maximum safety due to the better linear transfer of force of the sliding arm Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35°
SG25M SG30M SG40M SG50M SG60M SG80M SG100M SG125M SG150M
mm
250 300 400 500 600 800 1000 1250 1500
mm
140 140 140 140 140 140 140 140 140
mm
34 34 34 34 34 34 34 34 34
x 13 x 13 x 13 x 13 x 13 x 13 x 13 x 13 x 13
2.58 3.00 3.17 3.40 3.80 4.45 4.95 5.87 6.65
5 5 5 5 5 5 5 1 1
High-performance clamps
High-performance clamp SGTM, large throat depth
■
SG30T20M SG60T20M
mm
300 600
mm
200 200
mm
30 x 15 30 x 15
kg
3.50 4.30
qty.
1 1
VB0002
■
■
Clamping force up to 8,500 N at tightening torque of 40 Nm Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35° Opening 200 mm
High-performance clamp STBM, heavy duty
STB30M STB40M STB50M STB60M STB80M STB100M STB125M STB150M
mm
300 400 500 600 800 1000 1250 1500
mm
175 175 175 175 175 175 175 175
mm
40 40 40 40 40 40 40 40
x 20 x 20 x 20 x 20 x 20 x 20 x 20 x 20
kg
5.61 6.10 6.67 7.23 8.35 9.42 10.77 12.20
qty.
1 1 1 1 1 1 1 1
VB0002
■ ■
■
Clamping force up to 22,000 N at tightening torque of 70 Nm Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35° With 19 mm hexagonal bolt on the end of the spindle
High-performance clamp STBS, extremely heavy duty
■
STBS30 STBS50 STBS100
mm
300 500 1000
mm
200 200 200
mm
50 x 25 50 x 25 50 x 25
kg
10.46 12.17 17.30
qty.
1 1 1
VB0002
■
■ ■
Clamping force up to 35,000 N at tightening torque of 100 Nm Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35° With 36 mm hexagonal bolt on the end of the spindle With wedge for fixing the sliding arm
41
High-performance clamps
High-performance clamp STBVC, extremely heavy duty
■ ■
■ ■
Clamping force up to 35,000 N at tightening torque of 105 Nm Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35° With 19 mm hexagonal bolt on the end of the spindle With wedge for fixing the sliding arm
STBVC15 STBVC25 STBVC35
mm
150 250 350
mm
100 100 100
mm
40 x 20 40 x 20 40 x 20
kg
4.06 4.62 5.13
qty.
1 1 1
VB0002
Pressure plate for high-performance clamps Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35° Three design versions:
Description
■
■ ■ ■
Smooth faced (standard version) Rough faced for secure clamping on dirty surfaces V-groove face for round, oval and edged workpieces
3100736
Standard
3100737
Standard
3101192
Serrated
3101193
V-grooved
Suitable for
High-performance clamps SLM, SGM, STBM, STBVC, SGU, STBU, SPZ80K High-performance clamp STBS High-performance clamps SLM, SGM, STBM, STBVC, SGU, STBU, SPZ80K High-performance clamps SLM, SGM, STBM, STBVC, SGU, STBU, SPZ80K
VB0003
NEW
Fitters' clamp classiX GSL
■ ■
Clamping force up to 8,500 N with a tightening torque of 25 Nm Special heat-resistant pressure plate, can be tilted by up to 35°
GSL30 GSL60
mm
300 600
mm
120 120
mm
27 x 13 27 x 13
kg
qty.
VB0002
kg
qty.
VB0002
2.11 2.82
5 5
NEW
High-performance clamp classiX GSM
■ ■
Clamping force up to 12,000 N with a tightening torque of 40 Nm Special heat-resistant pressure plate, can be tilted by up to 35°
GSM25 GSM30 GSM40 GSM50 GSM60
mm
250 300 400 500 600
mm
140 140 140 140 140
You will find accessories on page 109 42
mm
30 30 30 30 30
x 15 x 15 x 15 x 15 x 15
2.58 3.00 3.17 3.40 3.80
5 5 5 5 5
KombiKlamp
Multi-purpose clamping Your benefits at a glance: 1 Multi-angle pad The multi-angle pad is especially adapted to round, oval and angled workpieces – from 60° inside to 60° outside. For perfectly flat clamping remove the multiangle pad. For spreading it is easy to reverse the position of the pad on the anvil of the clamp. Its like having 3 clamps in one. 2 Removable end stop The end stop can be removed – to allow the sliding arm to be quickly turned around for spreading. 3 Pressure plate For enhanced serviceability the pressure plate can be changed quickly and easily with no need for tools. It can be replaced very easily and quickly with a special larger-surface pressure plate or one made of stainless steel. 4 Tommy bar with BESSEY grip The addition of the plastic BESSEY grip means that clamping can also be very comfortable. The stable tommy bar has a plastic pad to ensure that it is easy to grip with your hand. This allows powerful, controlled clamping.
KombiKlamp SG-VAD
SG30VAD
mm
300
mm
120
mm
30 x 15
kg
2.95
qty.
6
VB0002
■ ■ ■
Clamping force up to 8,500 N Clamping and spreading of round, oval and angled workpieces Pressure plates can be replaced with no need for tools
43
U-clamps
Step-over clamping
44
No spacers or extension pieces necessary
Your benefits at a glance:
The original BESSEY U-clamps have been developed on the basis of the tried-and-tested all-steel, lever and high-performance clamps. The characteristic U-shaped fixed arms swiftly reaches over obstructions so find its objective like an extra hand. No spacers or extensions are needed with the high stepping U-clamp.
1 Extremely sturdy The U-shaped fixed arm is produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. 2 Special tilting pressure plate The heat-resistant pressure plate (SGU/STBU) is replaceable and can be tilted up to 35째 so it can even clamp on angled or sloping surfaces. It has an extremely long service-life due to the oil-soaked sintered steel insert's excellent sliding and emergency running properties.
3 Forged sliding arm The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can be sure of that. 4 Tempered spindle The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability. 5 Sturdy tommy bar The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.
U-clamps
U-shaped all-steel screw clamp GUZ ■
GU25-12-6ZK
mm
mm
250 120
mm
60
mm
mm
kg
60 22 x 10,5 1.46
qty.
10
VB0002
■
■ ■
Clamping force up to 4,000 N Double-sided step-over clamping, specially suited for T-profiles and double T-profiles Low weight Tempered stainless steel and fixed bracket for resilient and elastic clamping
U-shaped high-performance clamp SGU ■
SGU30-14-10
mm
mm
mm
mm
300 140 100 130
mm
kg
30 x 15 3.75
qty.
5
VB0002
■ ■
Clamping force up to 12,000 N at tightening torque of 40 Nm Step-over clamping, specially suited for T-profiles and I-profiles Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35°
U-shaped high-performance clamp STBU, heavy duty ■
mm
mm
mm
mm
STBU40-17-15 500 175 150 110
mm
kg
40 x 20 7.96
qty.
1
VB0002
■ ■ ■
Clamping force up to 22,000 N at tightening torque of 80 Nm Step-over clamping, specially suited for T-profiles and I-profiles With 19 mm hexagonal bolt on the end of the spindle Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35°
U-shaped lever clamp GUH ■
GU25-12-6H
mm
mm
250 120
mm
60
mm
mm
kg
10 22 x 10,5 1.67
qty.
5
VB0002
■ ■ ■
Clamping force up to 3,800 N Step-over clamping, specially suited for T profiles Low weight Quick – up to 5 x faster than regular clamps
45
Claw clamps
Clamping and spreading in confined spaces
Ideal for particularly challenging tasks The original BESSEY claw clamp lets you clamp and spread in even the most confined spaces. It can be used in narrow openings as well as for short projections. This is thanks to the clamp's unique clam-
46
ping and spreading mechanism, which is located behind the rail. The original BESSEY claw clamp also boasts a very robust construction. This makes it the perfect tool for particularly challenging tasks, such as welding and assembly work.
The claw clamp GRA – specially developed for welding and assembly work in poorly accessible places.
Claw clamps
Your benefits at a glance:
4
3
1
2
1 Extremely sturdy Fixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Increased throat depth without compromising clamping force. 2 External handle The handle is located behind the clamp's rail. This is specially conceived to allow the clamping and spreading of workpieces which are not easily accessible. 3 Special V-grooved pressure plate This sturdy pressure plate is made from high-grade cast iron, and can be tilted by up to 30°. The prism is ideal for clamping and spreading round or angular workpieces. 4 Removable end stop The end stop can be removed – to allow the sliding arm to be quickly turned around for spreading.
Claw clamp GRA
GRA30-12 GRA60-12 GRA100-12
mm
300 600 1000
mm
120 120 120
mm
28 x 11 28 x 11 28 x 11
kg
2.44 3.06 3.83
qty.
5 5 5
VB0002
Throat depth increased from 100 to 120 mm ■ ■ ■
Clamping and spreading force up to 7,500 N Externally-positioned spindle, protected from welding spatter Clear access to work area
Pressure piece GRD (2 pcs./bag)* ■
GRD
kg
0.70
qty.
1
VB0002
■ ■
Spreading from the inside outwards Flat jaw face V-groove for clamping round and oval workpieces
* While stocks last
47
Variable screw clamps
New flexibility with large clamping widths
N EW
A modular concept for the widest range of applications Alongside complete assembled high-performance clamping sets BESSEY also offers versatile accessories that can be combined with one another. Amongst these are two different rail models: One with a 28 x 11 mm profile in three different lengths, and another with a 30 x 15 mm profile for work with high clamping forces and clamping widths up to three metres. All rails have end fastenings on both
48
sides that can be loosened without tools. Sliding arms that are already fitted can be changed over from clamping to spreading or replaced by different sliding arms or even supplemented with others. Sliding arms with wooden grips, lever handles or tommy bars as well as gripping arm variant are available. The flexibility that this clamping system offers ensures that numerous applications can be handled by the combinations of rails and sliding arms available. There are no limits set with this individual tailoring.
Variable screw clamps
Your benefits at a glance: 1 End fastenings can be loosened without tools The end fastenings on both sides can be loosened without tools enabling rapid changeover of the sliding arms for spreading tasks. It is also possible to replace the sliding arms or to add additional sliding arms easily. 2 Interchangeable sliding arms The U-shaped sliding arm is made from forged tempered steel and guarantees the highest level of safety through the linear transfer of forces and can withstand extremely large loads. These can be replaced by other sliding arm variants to suit the application and can also be supplemented by others.
3 Special tilting pressure plate The heat-resistant pressure plate is replaceable and can be tilted up to 35째 so it can even clamp on angled or sloping surfaces. It has an extremely long service-life due to the oil-soaked sintered steel insert's excellent sliding and emergency running properties. 4 Tempered spindle The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability.
49
Variable screw clamps
NEW
Variable high-performance clamps – Complete set SLV
SLV100M SLV150M SLV200M
■ ■ ■
■ ■ ■
■
■ ■ ■
50
mm
28 x 11 28 x 11 28 x 11
kg
4.25 5.25 6.25
qty.
1 1 1
VB0002
Variable high performance clamps – Complete set GSV
GSV300M
■
mm
120 120 120
Clamping force up to 6,500 N Tipping is prevented through central positioning on the workpiece Long service life thanks to special heatresistant pressure plate with sintered steel insert, can be tilted by up to 35° Can be converted without tools for spreading tasks Clamp can be fed through an opening in the workpiece/component Wide range of possible applications due to interchangeable sliding arm available in various different designs (see accessories) NEW
■
mm
1000 1500 2000
Clamping force up to 9,000 N Tipping is prevented through central positioning on the workpiece Long service life thanks to special heatresistant pressure plate with sintered steel insert, can be tilted by up to 35° Can be converted without tools for spreading tasks Clamp can be fed through an opening in the workpiece/component Wide range of possible applications due to interchangeable sliding arm available in various different designs (see accessories)
mm
3000
mm
140
mm
kg
30 x 15 12.66
qty.
1
VB0002
Variable screw clamps
NEW
SLV size rails ■
mm
3101609 3101610 3101611
NEW
1000 1500 2000
mm
28 x 11 28 x 11 28 x 11
kg
qty.
2.41 3.41 4.42
VB0002
1 1 1
■
■
GSV size rails ■
3101612
mm
3000
mm
30 x 15
kg
qty.
10.40
VB0002
1
■
■
NEW
■
Description
3101519 3101518 3101525 3101524
31 01521
3101521
31 01590
3101590
NEW
30 x 15 mm profile, cold drawn and galvanised End fastenings on both sides can be loosened without tools – for rapid changeover Suitable for all GSV size sliding arms
Complete sliding arm for SLV sizes
31 01519/ 31 01518
31 01525/ 31 01524
28 x 11 mm profile, cold drawn and galvanised End fastenings on both sides can be loosened without tools – for rapid changeover Suitable for all SLV size sliding arms
Wooden handle Wooden handle Lever handle Lever handle
mm
120 140 120 140
mm
28 x 11 28 x 11 28 x 11 28 x 11
kg
0.74 0.86 1.10 1.14
Tommy bar incl. high-per120 28 x 11 0.91 formance pressure plate Gripping arm
120 28 x 11 1.32
qty.
1 1 1 1
VB0002
■
Four different grip variants/designs with different throats depths Suitable for all SLV size rails
1 1
Complete sliding arm for GSV sizes ■
Description mm
mm
kg
qty.
3101329
Tommy bar incl. high-per120 30 x 15 1.13 formance pressure plate
1
3101330
Tommy bar incl. high-per140 30 x 15 1.21 formance pressure plate
1
3101331
Tommy bar incl. high-per200 30 x 15 1.40 formance pressure plate
1
VB0002
■
One arm design with three throat depths Suitable for GSV size rails
51
C-clamps
Clamping using the original screw clamp shape
Whether manufactured using drop forging or drawn steel the Bessey C-clamps provide a solution for every application C-clamps are used when high clamping forces are required with consistently equal jaw openings, predominantly in the metal and steel-working sector. The C-clamp is the original type of screw clamp. A wide range of materials have been and are used in their manufacture. At one time there were even
52
versions made purely out of BESSEY all steel, whether drawn or forged, C-clamps now provide solutions for all the demands of the modern market. The VC Series is noteworthy for the fact that its frame is produced with original BESSEY profiled steel from our in-house steel drawing plant. It is then tempered and electro-galvanised. This achieves much higher tensile strength compared to cast versions.
The C-screw clamp VC is unique in featuring the characteristics of the original BESSEY all-steel screw clamp – it is light, handy, elastic and break-resistant.
C-clamps
C-clamp VC, stable ■
VC2 VC3 VC4 VC6 VC8 VC10
mm
0 - 50 0 - 75 0 - 100 0 - 150 0 - 200 0 - 250
"
0-2 0-3 0-4 0-6 0-7D 0 - 10
mm
"
50 2 50 2 60 2 Z 75 3 90 3 I 100 4
mm
19,5 x 9,5 22 x 10,5 25 x 12 27 x 13 30 x 15 40 x 20
kN
7 13 13 15 15 15
kg
0.43 0.63 1.02 1.41 2.25 4.01
qty.
10 10 10 10 5 5
VB0002
■ ■
Clamping force of up to 15,000 N Nearly unbreakable and tempered Tried-and-true BESSEY all-steel quality
C-clamp SC ■
SC40 SC60 SC80 SC100 SC120 SC150 SC200
mm
0 - 40 0 - 60 0 - 80 0 - 100 0 - 120 0 - 150 0 - 200
"
0-1P 0-2Z 0-3W 0-4 0-7D 0-6 0-7D
mm
40 55 65 75 85 95 105
"
1P 2E 2O 3 3R 3A 4R
kN
5,5 5,5 10 13,5 18 18 22
kg
0.40 0.57 0.99 1.40 2.10 2.35 4.00
qty.
10 10 10 10 10 10 5
VB0002
■
Clamping force of up to 22,000 N Drop forged
C-clamp CDF-C ■
CDF403C CDF404C CDF406C CDF408C CDF410C
mm
0 - 75 0 - 105 0 - 150 0 - 205 50-245
"
0-3 0-4R 0-6 0-8 2 - 10
mm
60 85 100 125 150
"
kN
kg
2 Z 13 0.85 2 A 16,5 1.60 3 P 17 2.32 4 I 17 3.42 5 Z 18 5.49
qty.
24 12 8 6 4
VB0002
■ ■
Clamping force up to 18,000 N Drop forged, extremely stable The copper-plated spindle prevents welding splatter from sticking
53
Body clamps and area pressure clamps
Large-area clamping and spreading
Ideal for sensitive workpieces and right angles The large, perfectly parallel jaw faces are characteristic of the original BESSEY K Body REVO. It allows easy clamping and spreading of sensitive surfaces and right angles. Even round and pointed workpieces. And the best thing is: thanks to their extra-
54
large contact surfaces, the original BESSEY K Body REVO and the UniKlamp are both universally applicable – even behind and to the side of the highquality profiled rail. This allows you to clamp in locations that conventional screw clamps are unable to reach. That's guaranteed!
The K Body REVO – holds workpieces exactly parallel. The Vario K Body REVO – enables step-less positioning of the upper part for optimization of weight distribution.
K Body REVO
Powerful clamping and spreading over large surfaces
C
D
Comp etitor
Comp etitor
1 Parallel clamping surface with jaw protection caps The extremely large flat clamping surfaces made of impact and break resistant polyamide are extremly powerful and exactly parallel. The three removable pressure caps are repellant to glue, replaceable and are also resistant to paint and grease solvents. 2 A moveable ‘fixed‘ jaw For the first time ever, BESSEY offers the opportunity to adjust both jaws to optimise clamping preparation. With the push of a button the ‘fixed‘ jaw can be moved to where you want it – eliminating a great deal of work piece balancing before glue is applied. 3 Protective workpiece contact elements The workpiece contact elements made from impact resistant polyamide prevent direct contact by the workpiece on the rail when the clamping surface is fully deployed. With TK 6 table clamps it is easy to fasten the K Body REVO clamps.
Prior B K Bod ESSEY y clam p New B K Bod ESSEY y REV O
B Comp etitor
Comp e
titor A
Clamping force [N]
Your benefits at a glance:
YouTube
Vario K Body REVO KRV
KRV100-2K KRV150-2K KRV200-2K KRV250-2K KR-VO
mm
1000 1500 2000 2500 -
mm
95 95 95 95 95
mm
260-1130 260-1610 260-2080 260-2580 -
mm
29 29 29 29 29
x9 x9 x9 x9 x9
kg
3.85 4.25 5.30 6.30 0.59
qty.
2 2 2 2 1
VB0003
■ ■
■ ■ ■
Variable jaw KR-VO suitable for all BESSEY K body REVO KRV und KR
■
Clamping force up to 7,000 N Steplessly adjustable and fixable upper section for improved workpiece positioning Very large parallel clamping surfaces With 3 pressure caps to protect delicate surfaces Can be converted to spreading function with no need for tools High-quality 2-component plastic handle
You will find accessories on page 113 55
Body clamps and area pressure clamps
K Body REVO KR
■ ■ ■ ■ ■
Clamping force up to 7,000 N Very large parallel clamping surface With 3 pressure caps to protect delicate surfaces Can be converted to spreading function with no need for tools High-quality 2-component plastic handle
KR30-2K KR60-2K KR80-2K KR100-2K KR125-2K KR150-2K KR200-2K KR250-2K
mm
300 600 800 1000 1250 1500 2000 2500
mm
95 95 95 95 95 95 95 95
mm
255-390 255-730 255-930 255-1130 255-1355 255-1610 255-2080 255-2580
mm
29 29 29 29 29 29 29 29
x9 x9 x9 x9 x9 x9 x9 x9
kg
qty.
1.83 2.76 3.10 3.45 3.87 4.28 5.09 6.05
4 4 2 2 2 2 2 2
VB0003
Framing set KP ■
■ ■ ■
KP Framing System (from 30 cm to 250 cm/12"–98") with four 90° KP Blocks Separately adjustable clamping force with 2 inserted clamps per corner Lightweight / easy to assemble Retail-ready packaging
Suitable for
KP
KRV / KR / K
kg
qty.
VB0003
kg
qty.
VB0003
kg
qty.
VB0003
0.55
1
Contents: 4 rail couplings and 4 adapters
Tilting K Body clamp adapter KR-AS (2 pcs./bag) ■ ■ ■
Adapter with tilting clamping jaws with a tilt range of -15° to +15° Clamping on sloping and parallel surfaces Retail-ready packaging
Suitable for
KR-AS
KRV / KR
0.18
12
K Body Extender KBX
■
■
■
Connect any two K Body clamps to increase the clamping capacity. The connector is made of robust aluminum. Comes with two red adapters. Use with Series KRV/KR. Not required for joining Series K. Retail-ready packaging
Suitable for
KBX20
KRV / KR / K
You will find accessories on page 113 56
0.75
12
Body clamps and area pressure clamps
UK UniKlamp
UK16 UK30 UK60
mm
160 300 600
mm
mm
80 80 80
172-270 172-415 172-720
mm
20 x 5 20 x 5 20 x 5
kg
0.62 0.72 0.93
qty.
6 6 6
VB0003
■ ■ ■ ■ ■ ■ ■
Clamping force up to 1,500 N Parallel jaw faces with extra-large contact surfaces Clamping of various shapes, along the whole length of the rail Universally applicable Light and easy-to-handle No need for tools for switching between clamping and spreading Retail-ready packaging
Area pressure clamps FK ■
FK16-8 FK20-10 FK40-10
mm
160 200 400
mm
80 100 100
mm
kg
16 x 7,5 19,5 x 9,5 19,5 x 9,5
0.60 1.10 1.40
qty.
10 10 5
VB0003
■ ■ ■
Clamping forcee up to 5,000 N 2 large, tilting jaw faces For workpieces with a sloping contact surface Large-area clamping of all workpieces from both sides
Box clamp KS
KS100 KS150 KSV
mm
200-1000 200-1500 Extension 1000
mm
16 16 -
kg
3.32 3.94 1.55
qty.
1 1 1
VB0003
■ ■ ■
Clamping force up to 5,000 N Infinitely adjustable clamping jaws Clamp on angled and parallel surfaces
57
One-handed clamps
One-handed clamping
Working alone and need another hand? This extremely sturdy original BESSEY one-handed clamp EHZ is perfect for all work that needs to be carried out with one hand – e.g. for overhead tasks, or if a further tool needs to be used at the same time for aligning purposes. The BESSEY EHZ one-handed
58
clamp enables you to hold or fix in place with just one hand. It also allows you to clamp just as powerfully as ever. The DuoKlamp allows you to switch from clamping to spreading at any time – all with one hand. That means you save both manpower and valuable time!
The one-handed clamp EHZ – the only with up to 5,000 N clamping power. The one-handed clamps EZS and DUO – strong clamping and spreading easily with just one hand.
One-handed clamps
Your benefits at a glance: 1 Parallel handle with pump lever The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 2 Rapid move button This button allows you to move the sliding arm at any time, quickly and with minimum effort. 3 Plastic pressure caps The removable plastic caps provide a nonmarring soft touch for use with wood and finished metal surfaces. 4 Versatility Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic.
One-handed clamp EHZ with 2-component handle
EHZ30-2K EHZ60-2K
mm
300 600
mm
100 100
mm
19,5 x 9,5 19,5 x 9,5
kg
1.25 1.67
qty.
6 6
VB0002
■ ■ ■ ■
Clamping force of up to 5,000 N Clamp and fix in place quickly and simply with just one hand With protective caps on the clamping surfaces Retail-ready packaging
59
One-handed clamps
One-handed clamping and spreading Your benefits at a glance: 1 Reversing Don't disassemble the clamp – JUST TURN THE KNOB! The practical turning knob allows you to switch easily at any time from clamping to spreading. 2 Parallel handle with pump lever The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 3 Rapidly-adjustable release lever A press of a button is all it takes: the release lever allows the clamp to be immediately released, as well as rapidly adjusted. 4 Large jaw faces The large, planar jaw faces made from impact- and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.
■ ■ ■ ■ ■ ■
Clamping force up to 1,200 N Change from clamping to spreading by switching, not converting Handle with pump lever parallel to the rail Convenient one-handed operation, with little effort required All-round clamping – in front of, behind and at the side of the rail Retail-ready packaging
DuoKlamp DUO
DUO16-8 DUO30-8 DUO45-8 DUO65-8
mm
160 300 450 650
mm
85 85 85 85
mm
75-235 75-380 75-535 75-685
mm
9-170 9-315 9-470 9-660
mm
20 20 20 20
x5 x5 x5 x5
kg
0.66 0.72 0.83 1.02
qty.
6 6 6 6
VB0003
DuoKlamp Extender DKX* ■ ■ ■
Accessory for increasing the clamping and spreading capacity of DuoKlamps Set up requires only a few movements of the accessory pieces Retail-ready packaging
DKX
mm
1650
mm
70
*Available while stocks last 60
mm
200-1800
kg
1.85
qty.
1
VB0003
One-handed clamps
Your benefits at a glance: 1 Powerful technology The extremely sophisticated technology makes it possible – single-handed clamping and spreading of workpieces with up to 2,000 N clamping force. 2 Intelligent release mechanism Thanks to the intelligent release mechanism, the upper section can be quickly converted from clamping to spreading without the need for tools. 3 Handle behind the rail The ergonomically shaped 2-component plastic handle with pump lever is positioned behind the rail, enabling a powerful grip. 4 Protective caps The protective caps on the clamping surfaces guarantee material protection and secure clamping.
One-handed clamp EZS
EZS15-8 EZS30-8 EZS45-8 EZS60-8 EZS90-8
mm
150 300 450 600 900
mm
80 80 80 80 80
mm
170-360 170-510 170-660 170-810 170-1110
mm
19 19 19 19 19
x6 x6 x6 x6 x6
kg
0.72 0.83 0.93 1.04 1.26
qty.
6 6 6 6 6
VB0003
■ ■
■ ■
Clamping force up to 2,000 N Toolless conversion for spreading thanks to intelligent release mechanism in upper section Ergonomically shaped 2-component plastic handle behind the rail On carded hang pack
61
Lightweight clamps
Rapid, gentle clamping
The new generation of high-tech clamps Thanks to BESSEY's continuous development work, new innovative clamping tools are appearing all the time. Produced from the highest-quality materials, using state-of-the-art techniques. Today, the focus is no longer on the clamping pressure – the key now is to come up with the most intelligent solution. A perfect example of this new generation of high-tech
62
clamps is the innovative KliKlamp: it is easy to handle, light and convenient, making it the first choice every time for light to medium clamping pressures. It is suitable for professional and home use – from modelling to furniture construction, from plastic to Plexiglass. Incidentally, you will find some more lightweight clamps on the next few pages. Especially for rapid and gentle clamping!
The KliKlamp KLI – feather light yet ultra strong and ideal for both professional and home use. The Wood Klemmy HKL – made from hardwood for quick, simple clamping.
63
KliKlamp
The lightweight clamp made of magnesium
64
Light as a feather – tough as nails
Your benefits at a glance:
Extremely lightweight, stable magnesium, fibre-glass reinforced plastics, and cold-drawn BESSEY quality steel: this optimum mixture is characteristic of the innovative high-tech KliKlamp lever clamp. That's why the smallest KliKlamp weighs just a tiny 260 g – simply ideal for assembly work or where several clamps are being used at once. The pressure is also built up easily and highly effectively: the VIBRAFIX ratchet mechanism lets you achieve a huge 1,200 N of clamping force quickly with just 2 fingers. You certainly will never have clamped as quickly, easily or as gently as this!
1 Sturdy magnesium The surface-coated fixed and sliding arms, made from sturdy magnesium, are extremely light and strong. 2 VIBRAFIX stepped ratchet mechanism The multi-stage VIBRAFIX ratchet mechanism is easy to operate, vibration-resistant, particularly easy to control, and can be released quickly.
3 A secure hold The fixed arm with the crossed v-grooves holds round, pointed or angular components firmly in place. This is part of what makes the KliKlamp so versatile. 4 Ergonomically shaped clamping arm The ergonomically shaped clamping arm made from fibreglass-reinforced polyamide is breakproof and fits very snugly in the hand. That's quality of the highest calibre.
Lightweight clamps
KliKlamp KLI
KLI12 KLI16 KLI20 KLI25 KLI30 KLI40
mm
120 160 200 250 300 400
mm
80 80 80 80 80 80
mm
20 x 5 20 x 5 20 x 5 20 x 5 20 x 5 20 x 5
kg
0.26 0.29 0.32 0.35 0.38 0.45
qty.
6 6 6 6 6 10
VB0003
■ ■ ■ ■ ■
Clamping force up to 1,200 N Weight starts from a tiny 260 g Sturdy fixed and sliding arms made from lightweight magnesium Stepped, vibration-resistant VIBRAFIX ratchet mechanism Retail-ready packaging
KliKlamp set in systainer KLI-S Contents/pc.
KLI-S
Per 4xKLI12 / KLI16 / KLI20 / KLI25
kg
6.50
qty.
1
VB0003
■ ■
Practical systainer T-Loc Ideal for assembly work
KliKlamp counter display KLI-D ■
Contents/pc. kg
KLI-D 2xKLI12 / 4xKLI16 / 6xKLI20 / 4xKLI25 5.70
qty.
1
VB0003
■
Professional sales display Optimum presentation of the KliKlamp
65
Light duty bar clamp U-style
Small and very handy Your benefits at a glance: 1 Step-over clamping U-shape The rail is made of quality steel drawn in a single piece for durability and strenght. The U-shape of the rail enables step-over clamping up to 20 mm so you can get to those hard-to-reach places. 2 Sliding arm The sliding arm is made of die-cast zinc. It is light, stable and break-resistant. 3 Protection pads Particularly sensitive workpieces are effectively protected thanks to the protection pads. For all-round gentle clamping.
Light duty bar clamp U-style LMU
mm
■ ■ ■ ■ ■
66
Clamping force up to 1,500 N Step-over clamping Comes with two protective caps Small and easy to handle Light weight
mm
mm
kg
qty.
VB0001
LMU10/5 100 50 15 x 5 0.23 24 LMU15/5 150 50 15 x 5 0.27 24 LMU20/5 200 50 15 x 5 0.31 24 The Light duty bar clamp U-style LMU will be delivered in an attractive sales presenter. Sale to dealers in packaging units only.
Lightweight clamps
Die-cast zinc screw clamp LM
LM10/5 LM15/5 LM20/5 LM25/5 LM30/5 LM15/8 LM20/8 LM25/8 LM30/8 LM20/10 LM25/10 LM30/10 LM40/10 LM50/10 LM60/10 LM80/10
mm
100 150 200 250 300 150 200 250 300 200 250 300 400 500 600 800
mm
mm
50 50 50 50 50 80 80 80 80 100 100 100 100 100 100 100
kg
15 x 5 15 x 5 15 x 5 15 x 5 15 x 5 20 x 5 20 x 5 20 x 5 20 x 5 25 x 6 25 x 6 25 x 6 25 x 6 25 x 6 25 x 6 25 x 6
0.26 0.27 0.31 0.35 0.37 0.51 0.55 0.60 0.64 0.90 0.95 1.02 1.10 1.24 1.30 1.58
qty.
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
VB0001
■ ■
■ ■ ■
Clamping force up to 2,000 N Clamping arms manufactured in toughened die cast zinc black powder coated to prevent chemical corrosion Comes with protective cap Small and easy to handle Light weight
Wood Klemmy HKL
■
HKL20 HKL30 HKL40 HKL60 HKL80 HKL100
mm
200 300 400 600 800 1000
mm
mm
110 110 110 110 110 110
kg
20 x 5 20 x 5 20 x 5 20 x 5 20 x 5 20 x 5
0.32 0.46 0.54 0.70 0.86 1.00
qty.
10 10 10 10 10 10
VB0001
■
Upper and lower arms and lever made from high-quality hardwood Cork pads for gentle clamping
Aluminium mini clamp AM
■
AM4
mm
47
mm
34
kg
0.06
qty.
10
VB0003
■
Ideal for modelling and hobbyists Low weight of just 55 g
Parallel screw clamp PA ■
PA28 PA40 PA55 PA70 PA105
mm
28 40 55 70 105
mm
19 27 34 43 65
kg
0.08 0.10 0.18 0.43 0.92
qty.
1 1 1 1 1
VB0003
■
Twin spindles Precisely parallel positioning of the jaw faces
67
Table vice
Your benefits at a glance: 1 Parallel clamping With guide rods, the mini vice S 10 is ideal for parallel clamping. 2 Clamping at an angle When used without guide rods, the screw clamp S 10 is ideal for clamping at an angle. 3 Easily mounted Two clips for quick and simple attachment to a table edge.
■ ■ ■ ■ ■
Mini Vice S 10
Low weight Parallel clamping with guide rods Clamping at an angle without guide rods (max. 25°) Easy to attach, with 2 table clips supplied Retail-ready packaging
S10-ST
mm
100
mm
kg
90
qty.
0.83
6
VB0003
Table clamp
■ ■
68
Especially for DIY applications and domestic appliances Special accessory for angle clamps WS 3/WS 6, screw clamp S 10 and K Body clamps REVO KR/KRV to hold them to a work surface edge
TK 6 RB 269 LM 10/5R8
TK6 RB269 LM10/5R8
mm
8 8 8
mm
60 60 100
mm
22 28 50
kg
0.10 0.19 0.22
qty.
10 1 1
VB0003
Spring clamps
For flexible, featherlight clamping
VarioClippix XV – suitable for one-handed use even at the maximum opening width of 170 mm. Clippix XC – particularly easy to handle and suitable for all applications.
Convenient clamping with constant clamping pressure BESSEY's spring clamps are small... but rather special. That's because they lie perfectly in the hand, guaranteeing ease of handling. Even with
large opening widths, powerful, constant onehanded clamping is always possible. And the infinitely variable adjustment and protective caps mean that even the most delicate workpieces receive effective protection. After all, size isn't everything!
69
Spring clamps
Your benefits at a glance: 1 Swivelling clamping arm The swivelling super polyamide clamping arm ensures optimum handling. It is light and can be quickly and infinitely adjusted up to max. 100 mm. 2 Ergonomic 2-component handle The ergonomically shaped 2-component handle is fitted with soft material inserts. This makes the handle pleasantly soft, as well as particularly resistant to slipping. 3 Protective caps Particularly sensitive workpieces are effectively protected thanks to the protective caps. For all-round gentle clamping.
■ ■ ■ ■
Variable opening of up to 100 mm, yet can be operated with one hand Lightweight, functional and easy to handle Extremely sturdy Retail-ready packaging
VarioClippix XV
XV3-50 XV5-100
mm
55 100
"
mm
"
mm
2 4
37 50
"
1I 2
kg
qty.
VB0003
kg
qty.
VB0003
0.07 0.17
12 12
VarioClippix XV
■ ■ ■ ■
70
Variable clamping width up to 170 mm, yet can be operated with one hand Lightweight, functional and easy to handle Extremely stable Retail-ready packaging
XV5-170
mm
170
6
50
"
2
0.14
12
Spring clamps
Clippix XC Contents/pc.
XC1 XC1-SET XC2 XC3 XC5 XC7
mm
20 20 25 35 50 75
"
A A 1 1Z 2 3
mm
20 20 30 37 50 70
"
A A 1W 1I 2 2A
7 x XC1 -
kg
0.01 0.06 0.02 0.05 0.12 0.18
qty.
10 8 10 10 10 10
VB0003
■ ■ ■
Lightweight, functional and easy to handle Extremely sturdy Retail-ready packaging
Clippix XCL, Needle nose spring clamp Contents/pc.
XCL2 XCL2-SET XCL5
mm
55 55 70
"
mm
"
2 W 60 2 Z 2 W 60 2 Z 3 110 4 R
2 x XCL2 -
kg
qty.
0.02 10 0.04 10 0.14 10
VB0003
■ ■ ■ ■
Long, pointed clamping arm for working in tight spaces Large width for clamping in borderless areas Soft, slip-proof grip pads Retail-ready packaging
71
Edge clamps
For all edge clamping needs!
Complete specialised tasks easily Special tasks and applications often require the use of special tools. Which is why, for edge clamping,
BESSEY has come up with a series of light, easy-tohandle edge clamps. Also available for one-handed operation if required. Specially developed to make your day-to-day work even easier!
The one-handed edge clamp EKT – ideal for applying multilayered edge strips with just one hand. The edge clamp KT8-3 – a C-frame that is robust for heavy duty and high clamping pressures.
72
Edge clamps
Your benefits at a glance: 1 Unique twin spindle The outer spindle acts on the clamping jaws. The inner spindle applies pressure to the front edge. And the impact resistant plastic handle for one-handed use means that any task or application is well within your grasp. 2 Large jaws Non-slip, gentle clamping. Max. opening distance: 55 mm. The large jaws with integrated colourless soft plastic caps increase the versatility of the clamp. 3 Swivel pressure plate The large pressure plate will swivel to apply pressure wherever it is required. 4 Light aluminium housing Lightweight yet highly effective. The statically-optimised aluminium housing creates a corrosion-resistant body for the convenient, one-handed edge clamp EKT.
One-handed edge clamp EKT
■ ■ ■
EKT55
mm
10-55
mm
45
kg
qty.
VB0003
kg
qty.
VB0003
0.82
1
For rapid one-handed operation Low weight Opening up to 55 mm
Edge clamp Kantenfix KF
KF2 KF4
mm
10-48 10-80
mm
80 110
0.76 1.58
10 1
■ ■
For quick one-handed operation Widths up to 80 mm 73
Edge clamps
Edge clamp KT For rail thickness up to max.
Description
KT5-1CP KT5-2
■ ■
mm
1 spindle 2 spindles
kg
13 13
qty.
0.35 0.58
1 1
VB0001
Practical accessory for clamping edges and difficult to reach areas Suitable for conventional screw clamps with a max. rail thickness of 13 mm
C-frame edge clamp KT
■ ■ ■ ■
Three-spindle C-frame clamp Extra strong, with forged frame Universally applicable within the fields of wood and metal processing Suitable for welding
KT8-3
mm
mm
mm
mm
0 - 80
80
kg
qty.
VB0003
kg
qty.
VB0003
2.37
5
Edge clamp CKT ■ ■ ■
Double-spindle C-screw clamp High pressure for gluing edges Arm made from malleable cast iron
CKT7-6
20-70
60
1.57
10
Panel carrier KFP
KFP
■ ■
■
74
Load-bearing capacity 75 kg For the safe lifting and carrying of panels such as wood sheets, chipboard panels, glass and plexiglass High-friction rubber coating on the moving clamping jaws
mm
10-65
kg
1.01
qty.
2
VB0003
Band clamp and ratchet straps
Clamping frames and curves
The band clamp BAN 700 and the Vario corners BVE – the perfect pair for gentle, non-warping clamping.
For even clamping on both sides without warping or skewing of the work piece Clamping curves, polygonal connections and closed contours are traditionally some of the most difficult clamping jobs. BESSEY has come up with a startling solution to this problem: in the form of the patented band clamp BAN 700, and the practical
Vario corners. These two products are suitable for all those situations where gentle, non-warping, all-round clamping is needed. Universally applicable. For wood and plastic as well as in metal construction. Secured by an automatic locking system that ensures even tractive forces on both sides, which do not slacken until the clamp is released. No warping – no stress!
75
Band clamp and ratchet straps
3
4
1
2
Your benefits at a glance: 1 Band is drawn in on both sides This ensures that the pressure is applied equally on all corners. This is just perfect for ensuring clamping without warpage. 2 Integrated coiling mechanism The intergrated coiling mechanism is operated by a crank handle which avoids tangling of and damage to the band. So you never need to worry about your band getting "chewed up" ever again!
76
3 Practical Vario corners Whether you need high pressure on mitre joints or precise adjustment to corners: The practical Vario corners with tilting pressure plates perfectly complement the BESSEY band clamp. 4 Extremely tearproof The special woven polyester clamping band guarantees a high resistance to tearing, and a clamping range of 7 m. The simply closing system can be opened at any time, quickly and simply.
Band clamp and ratchet straps
Band clamp BAN 700
BAN700
Clamping ange
Band wxd
Up to 7 m
25x1
mm
kg
qty.
60°-180° 0.56
5
VB0003
■ ■ ■ ■
Even pressure on mitre joints Crank handle can be relocated for right and left-handed users Contains: 1 band clamp, 4 Vario corners Retail-ready packaging
Vario corners BVE Band wxd
BVE
mm
25x1
60°-180°
kg
0.10
qty.
5
VB0003
■ ■ ■
Infinite angle adjustment from 60-180° Contains: 6 Vario corners Retail-ready packaging
Band clamp BAN 400
BAN400
Clamping range
Band wxd
Up to 3.8 m
24x1
mm
kg
0.48
qty.
12
VB0003
■ ■ ■
Clamp right-angled work pieces with 4 plastic corners Even pressure at all 4 corners Retail-ready packaging
77
Angle and mitre clamps
Clamping angles and mitres
For all the toughest tasks Clamping workpieces of different thicknesses, clamping directly into a mitre joint, clamping all kinds of angles: BESSEY has developed top-class-
78
special tools for solving all of these challenging clamping tasks. Whether angle clamps, mitre clamps or irregular angle clamps – we know what you really need!
The angle clamp WS – clamping workpieces of different thicknesses in a perfect right angle.
Angle and mitre clamps
Angle clamp WS Current passage max.
WS3 WS6
mm
2 x 55 2 x 100
mm
30 36
mm
■
kg
30 60
1.00 2.30
qty.
10 4
VB0003
■ ■ ■
You will find accessories on page 109
■
Automatic adjustment to variouslysized work pieces Quick – clamp with a spindle Stable body For attaching with TK6 table clamp WS 3 – retail-ready packaging
Angle clamp WS
WS1
mm
mm
2 x 73
kg
12
qty.
0.20
12
VB0003
■ ■ ■ ■
Clamp variously-sized work pieces with 2 spindles For light clamping work Made from die-cast zinc Retail-ready packaging
Mitre clamping system MCX ■
MCX
mm
100
22.5°/30°/45°/60°
kg
0.70
qty.
1
VB0003
■ ■ ■
Mitre system for 22.5°, 30°, 45° and 60°angles Even pressure on the mitre Angle adapter can be changed without tools Practical accessory for BESSEY screw clamps TG,GZ, GMZ, EHZ, EZS and DUO
Mitre clamp GS
■
GS11
mm
105
mm
40
45°-120°
kg
2.50
qty.
1
VB0003
■ ■
Clamps angles between 45 and 120 degrees Soft pads prevent scratching and slipping Pressure applied directly on the mitred faces to ensure maximum contact 79
Rafter clamps
Clamping wooden frames, rafters and beams
Strong clamping with versatility The BESSEY rafter clamp is the essential professional tool for roof and wood constructions.
80
Its movable sliding arm means it can employed as a beam clamp at a moment's notice: Simply drive in the point, close the clamp, clamp it up to a high pressure – and that's all!
Rafter clamp SPZ – the versatile professional tool for roof and wooden constructions.
Rafter clamps
Your benefits at a glance: 1 Hammer-in tip First of all, the tip is driven into the rafter. The clamp is then quickly closed, to allow you to start right away with powerful clamping. 2 Broad impact surface The broad impact surface makes it easier to drive in the clamp. 3 Special tilting pressure plate With the SPZ 80 K, the special tilting pressure plate ensures problem-free clamping even when working with sloping parts. It can be tilted by up to 35°. 4 Sturdy hexagonal bolt The SPZ 80 K's tough hexagonal bolt allows powerful yet controlled tightening, with the help of a torque wrench.
Rafter clamp SPZ
SPZ 80K
SPZ60K SPZ80K
mm
600 800
mm
120 140
mm
27 x 13 30 x 15
kg
2.90 5.00
qty.
5 2
VB0002
SPZ 60K ■ ■ ■
Clamping force up to 12,000 N For all roofing and timber frame constructions SPZ 80 K with 17 mm hexagonal bolt and heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35°
Cutting ring for SPZ 80 K
■
3101219
kg
0.18
qty.
1
VB0003
Anti-slip clamping with the cutting ring pressure plate
You will find accessories on page 109 81
Door frame and window assembly tools
Assembling door frames
Complete assembly system The use of foam plastic for securing doorframes demands specialist tools that will ensure accurate alignment and support. With its TU door frame clamp, BESSEY has developed a patented assembly
82
tool which adequately meets these requirements. This, combined with the door frame straightening clamp TFM and the angle door frame straightening clamp WTR, make up the perfect assembly system. This noticeably facilitates and rationalises the process of fitting door frames.
The door frame clamp TU – easy to handle, and maintains the precise door frame dimensions.
Door frame and window assembly tools
Door frame clamp TU ■
mm
TU
kg
565-1010
1.31
qty.
2
VB0003 ■
■
■ ■
Gently and precisely braces and supports door casing during foam filling of wall joint Telescopic square anodised aluminium tubing with mm scale and adjusting screw for precision work Cross-shaped pressure plate with interchangeable clamping elements for frame depths of 6 to 13 cm or 13 to 30 cm. Clamping elements with felt protection for sensitive door frames Wing screws for wall support
Door frame clamp set TU-Trage ■
Contents/pc.
TU-TRAGE
kg
6 units of TU
11.07
qty.
VB0003
qty.
VB0003
1
■
6 (3 sets) door frame clamps per display unit For a total of 3 doors
Door frame straightening clamp TFM Adjusting range
TFM
mm
35
mm
70
kg
0.58
2
■ ■
For quick, precise aligning and fixing of door frames The intelligent companion for the BESSEY door frame clamp TU and TMS
Angle door frame straightening clamp WTR
WTR
Opening chuck thickness
Adjusting range
mm
mm
8-30
32
■
kg
1.05
qty.
2
VB0003
■
For neatly fixed and stabilised frame corners For mounting at a precise 90° angle
83
Door frame and window assembly tools
Door frame assembly device TMS
mm
TMS
■
■ ■
■
Gently and precisely braces and supports door casing during foam filling of wall joint Telescopic round aluminium tube with adjusting screw for precision work With clamping elements on the clamping faces in order to secure struts in frames and to hold them at precise distances On carded hang pack
kg
560-1010
0.68
1
2
3
4
qty.
VB0003
qty.
VB0003
6
6
5
Window installation clamp FRK
FRK85
■
84
Permits rapid, precise straightening and fixing of window frames
Frame thicknesses
Adjusting range
mm
mm
40-85
30
kg
0.43
4
Sash Clamps
Sash clamps TAN with I-profile 80 x 42 x 3.9 mm Jaw dimensions wxh
TAN80 TAN120 TAN150 TAN210 TAN250
mm
mm
800 1200 1500 2100 2500
■
kg
80x80 80x80 80x80 80x80 80x80
7.90 10.10 12.20 15.00 17.50
qty.
1 1 1 1 1
VB0003
■ ■ ■
Clamping force up to 24,000 N Easily adjustable pressure plates Removable crank handle Very sturdy thanks to I-profile
Sash clamps TB with T-profile 40 x 40 x 5 mm Jaw dimensions wxh
TB100 TB120 TB150 TB210 TB250
mm
mm
1000 1200 1500 2100 2500
kg
66x43 66x43 66x43 66x43 66x43
5.50 6.20 6.40 8.50 11.00
qty.
1 1 1 1 1
VB0003
■ ■ ■ ■
Clamping force up to 14,000 N With attached locking bolt Tommy bar Sturdy thanks to T-profile
Pipe clamping set For pipes Ø
BPC-H12 BPC-H34
mm
21.3 26.9
"
1/2 3/4
mm
40 42
kg
0.88 1.30
qty.
4 4
VB0003
■ ■ ■ ■ ■
Suitable for steel pipes DN 20/R3/4" or DN 15/R1/2“ Outer diameter 26.9 mm and 21.3 mm Infinitely-adjustable clamping width With stand Retail-ready packaging
85
Seaming tool
Clamping large sheets of smooth material Your benefits at a glance: 1 Vacuum pumps with control function The required vacuum is generated with only a few movements of the pump – for a maximum vacuum and top clamping force up to 1,200 N. The status of the vacuum can be checked at any time via a marking ring on the pump tappet and brought back up to the maximum by repeated pumping. 2 Release button By simply pressing the release button, the vacuum disappears and the seaming tool can be removed quickly. 3 Quick adjusting screw To quickly adjust the distance, simply undo the screws and slide the suction cups into the desired position via the guide rails. 4 Sturdy construction The proven BESSEY all-steel rails, which run in anodised aluminium profiles, keep the suction discs on precisely the same level, even under high clamping pressures. This guarantees a precise finished result.
Seaming tool PS 130, big and strong Width
■
■
■
■
For clamping and positioning large and potentially heavy components with a smooth surface, such as artificial stone, ceramic, granite, Corian®, plastic, sheet metal and glass Manual vacuum pumps for maximum suction power, and therefore a maximum level of horizontal clamping force up to 1,200 N Marking ring on the pump lever to permanently check for a reliable vacuum Practical quick adjustment function for rapid adjustment of the distance between the two suction cups
210 mm 8 ¼ In.
mm
5-130
mm
215
kg
4,08
PS 130
PS 55
Corian® is a registered trademark of DuPont
86
mm
770
120 mm 4 ¾ In.
PS130
Length qty.
1
VB0003
Seaming tool
Your benefits at a glance: 1 Gentle suction cups Easy to use. Engage the handle on the suction cups to generate a vacuum, and the seaming tool adheres automatically to the sheet. 2 Practical cam levers The two levers on the guide bars can be used to easily control the height differences which can occur when pulling together the sheets. 3 Sturdy construction Cold-drawn, electro-galvanised guide rods in sturdy aluminium profiles prevent the seaming tool from bending open during the clamping process and hold the seaming tool on one level. This guarantees a precise finished result. 4 Ergonomic wooden handle With the perfect handle, you can achieve up to 260 N of clamping force in the horizontal plane. This need is met by the ergonomic wooden handle and the burrfree, rivetted spindle with acme thread.
Seaming tool PS 55 Width
PS55
mm
mm
10-55
2
210 mm 8 ¼ In.
120 mm 4 ¾ In.
1
147
Length mm
361
kg
1.55
qty.
1
VB0003
■
3
PS 55
■ ■
For clamping and positioning components with a smooth surface, such as ceramic, granite, Corian®, plastic, sheet metal and glass, which require low clamping forces (up to 260 N) Clamping levers on the suction cups ensure rapid handling Cam lever to compensate for differing heights at the joint
PS 130
Corian® is a registered trademark of DuPont
87
Special flooring tools
For laying parquet, laminated and panel flooring
Simple and efficient Floor coverings such as wood and cork parquet, laminated and panel flooring are stylish and fashionable. BESSEY has developed a range of specialist clamping tools that make the laying
YouTube
88
of these sought after floor coverings easier and more efficient. Examples of Bessey innovations are spacer PVA and the flooring and clamping system SVH. That makes BESSEY a trendsetter in this field as well!
Used in conjunction with the PVA and AV2 accessories the PVZ flooring clamp delivers professional standards of installation on parquet, laminate and panel flooring. The AV2 achieves consistent edge spacing between 5 and 20 mm without the need for multiple wedges.
Special flooring tools
Spacer AV2 (4 pcs./bag)
AV2
mm mm
20
89
Material
Adjusting range
Polyamide
5 - 20
mm
■
kg
qty.
0.23 12
VB0003
■ ■
■ ■
Quickly and infinitely adjustable for wall distances of 5 to 20 mm Spacer for floating laminate and parquet flooring installations Wide contact and support area for avoiding pressure points on the floorboards and plaster Easy to remove by simply turning back Very light and compact
The spacer will be delivered in an attractive sales presenter. Available only in full pack quantities. Spacer PVA Adjusting range
Material mm mm
PVA
mm
35 130
Die-cast zinc
7 - 35
■
kg
qty.
VB0003
0.48 6
■ ■
■
Infinitely adjustable for wall distances of 7 to 35 mm Front and lateral support when gluing solid wood floorings Pull-down function dependent on the inclined angle of the spindle, with movable mounted pressure plate with protective cap Extra wide contact area of 130 mm prevents edge damage to the floorboards
Flooring clamp PVZ ■
mm
PVZ65
650
mm
130
kg
qty.
2.60
VB0003
5
■ ■
Sturdy construction Ideal for gluing the first three rows of wooden or laminated floor panels Optimum adjustment of distance from wall
Flooring and clamping system SVH/SVG Band wxd mm
mm
SVH400 4000 25x1 SVH760 7600 25x1 SVG 4000 25x1
Material
Tear proof
Polyester Polyester Polypropylene
5000 5000 2500
N
■
kg
0.75 0.77 0.69
qty.
1 1 1
VB0003
■ ■
For laying parquet, laminated and panel flooring SVH with spacer and band of highstrength polyester SVH 400 and SVG – Retail-ready packaging
Additional use: can be used as lashing straps 89
Self-adjusting toggle clamps
Self-adjusting jaw height for rapid clamping
N EW
The power to be in position fast! With the new self-adjusting toggle clamps from BESSEY, work pieces of differing heights can be clamped both quickly and securely. This makes them perfectly suited for use in small-scale production situations. However, it wouldn't be a BESSEY toggle lever clamp if our development team hadn't come up with another stand-out feature – true to our company motto "BESSEY. Simply better." – which is the ability to automatically adjust to differ work piece heights while also maintaining
90
constant clamping force. This makes timeconsuming manual adjustment of the pressure screw a thing of the past. BESSEY toggle clamps have even more to offer when it comes to their flexibility; the clamping force can be optimized to the demands of the particular workpiece, simply by turning a set screw on the cantilevered joint. Furthermore, the hole pattern on the base plate has been designed to facilitate fast and secure clamping set-up. All this makes it an extremely flexible clamping tool – give it a try!
91
Self-adjusting toggle clamps
YouTube
Your benefits at a glance: 1 Automatic adjustment of the jaw height The BESSEY self adjusting toggle clamp automatically adjusts to the height of the particular work piece. The infinitely variable jaw heights up to 40 mm (1 O In.) on the horizontal and 16 mm (P In.) on the push/pull type are achieved with no loss of clamping force. This renders time-consuming manual adjustment of the pressure screw unnecessary.
92
2 Set screw on the cantilevered joint Using the set screw on the cantilevered joint, the clamping force can be adjusted to your particular requirements, up to 2,500 N (550 lbs). 3 Hole pattern on the base plate The base plate, which is suitable for both metric and imperial, has been designed to facilitate fast and secure clamping set-up. 4 Ergonomic handle The plastic injection molded and ergonomically designed handle fits well in the hand and has a very good grip.
Self-adjusting toggle clamps NEW 20 HH STC-
Horizontal toggle clamp with open arm and horizontal base plate STC-HH ■
mm
STC-HH20 STC-HH50 STC-HH70
"
20 40 60
appr. N
S 1100 1 O 2500 2 Z 2500
lbs.
250 550 550
kg
0.20 0.38 0.42
qty.
6 6 6
VB0003
■
■
■ ■
■
STC-HH20 available from April 2013 You will find accessories on page 109
In the clamped position, the lever is horizontal Automatic and infinitely variable adjustment of the clamping height up to 40 mm (1 O In.) while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws Clamping force is variable up to 2,500 N (550 lbs) depending on the adjustment of the set screw in the cantilevered joint Sturdy, tempered metal sheets for a long service life Hole pattern on the base plate designed to facilitate fast and secure clamping set-up for metric and imperial High-quality oil resistant twocomponent plastic handle (STC-HH20 with slip protection)
Spindle adjustment range
Pressure plate diameter
Length of base
Length of base plate 1
Length of base plate 2
Length of 2-comp handle
Height of handle (closed)
Height of handle (open)
Height of extension arm
Height of spindle, cpl.
Height of base
Width of extension arm (external)
Width of extension arm (internal)
Width of 2-comp. handle
Width of base plate
Length of hole spacing 1
Length of hole spacing 2
Length of hole spacing 3
mm "
L1
L2
L3
L4
L5
L6
L7
L8
H1
H2
H3
H4
H5
B1
B2
B3
B4
Lo1
Lo2
Lo3
Lo4
Ø
167
45
20
16
83
45
35
46
44
142
10
42
25
10
6
20
42
26
13
28
26-31,75
5,5
6.57
1.77
0.79
0.63
3.27
1.77
1.38
1.81
1.73
5.59
0.39
1.65
0.98
0.39
0.24
0.79
1.65
1.00
0.50
1.10
1-1.25
0.22
STCHH50
mm "
210
66
40
23
115
64
50
53
46
155
13
50
20
13
8
26
57
25,4
25,4
38
32-44
6,3
8.27
2.60
1.57
0.91
4.53
2.52
1.97
2.09
1.81
6.10
0.51
1.97
0.79
0.51
0.31
1.02
2.24
1.00
1.00
1.50
1.26-1.73
0.25
STCHH70
mm "
210
66
40
23
115
64
50
53
64
175
13
68
38
13
8
26
57
25,4
25,4
38
32-44
6,3
8.27
2.60
1.57
0.91
4.53
2.52
1.97
2.09
2.52
6.89
0.51
2.68
1.50
0.51
0.31
1.02
2.24
1.00
1.00
1.50
1.26-1.73
0.25
Diameter of hole
Length of extension arm
STCHH20
Width of elongated hole
Total length
Table of dimensions
H5
H4 L4 L3 L2
H2
L5 L1 Lo 2
STC-HH50 STC-HH70
B3
Lo 3
Lo 4
B4
B2
Lo 1
B1
Lo 1 Lo 2
H1
H3
STC-HH20
L5 L7 L6
L8
3D CAD drawings available on request 93
Self-adjusting toggle clamps
NEW
Horizontal toggle clamp with open arm and vertical base plate STC-HV
■ ■
■
■ ■
■
In the clamped position, the lever is horizontal Automatic and infinitely variable adjustment of the clamping height up to 20 mm (S In.) while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws Clamping force is variable up to 1,100 N (250 lbs) depending on the adjustment of the set screw in the cantilevered joint Sturdy, tempered metal sheets for a long service life Hole pattern on the base plate designed to facilitate fast and secure clamping set-up for metric and imperial High-quality oil resistant twocomponent plastic handle with slip protection
mm
STC-HV20
"
20
appr. N
1100
S
lbs.
kg
250
qty.
0.21
VB0003
6
Available from April 2013 You will find accessories on page 109
Pressure plate diameter
Length of base
Length of base plate 1
Length of base plate 2
Length of 2-comp handle
Height of handle (closed)
Height of handle (open)
Height of extension arm
Height of spindle, cpl.
Height of base
Width of extension arm (external)
Width of extension arm (internal)
Width of 2-comp. handle
Width of base plate
Length of hole spacing 1
Length of hole spacing 2
Length of hole spacing 3
Width of elongated hole
L2
L3
L4
L5
L6
L7
L8
H1
H2
H3
H4
H5
B1
B2
B3
B4
Lo1
Lo2
Lo3
Lo4
Ø
45
20
16
83
38
–
46
65
162
10
42
45
10
6
20
18
10-13
26
13
–
5,6
6.57
1.77
0.79
0.63
3.27
1.50
–
1.81
2.56
6.38
0.39
1.65
1.77
0.39
0.24
0.79
0.71
0.39-0.51
1
0.50
–
0.22
H1
H4
Lo 1
H5
B4 L4 L3 L2
H2
Lo 3 Lo 2 L6 L5 L1
B3
B1
B2
STC-HV20
L8
3D CAD drawings available on request 94
L5
Diameter of hole
Spindle adjustment range
L1 167
H3
Length of extension arm
mm "
STCHV20
Total length
Table of dimensions
Self-adjusting toggle clamps
NEW
Horizontal toggle clamp with open arm and angled base plate STC-HA ■
mm
STC-HA20
"
20
appr. N
S
1100
lbs.
250
kg
0.23
qty.
6
VB0003
■
■
■ ■
■
Available from April 2013 You will find accessories on page 109
In the clamped position, the lever is horizontal Automatic and infinitely variable adjustment of the clamping height up to 20 mm (S In.) while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws Clamping force is variable up to 1,100 N (250 lbs) depending on the adjustment of the set screw in the cantilevered joint Sturdy, tempered metal sheets for a long service life Hole pattern on the base plate designed to facilitate fast and secure clamping set-up for metric and imperial High-quality oil resistant twocomponent plastic handle with slip protection
Pressure plate diameter
Length of base
Length of base plate 1
Length of base plate 2
Length of 2-comp handle
Height of handle (closed)
Height of handle (open)
Height of extension arm
Height of spindle, cpl.
Height of base
Width of extension arm (external)
Width of extension arm (internal)
Width of 2-comp. handle
Width of base plate
Length of hole spacing 2
Length of hole spacing 3
Width of elongated hole
L2
L3
L4
L5
L6
L7
L8
H1
H2
H3
H4
H5
B1
B2
B3
B4
Lo1
Lo2
Lo3
Lo4
Ø
45
20
16
83
–
–
46
85
181
10
42
66
10
6
20
45
10-30
20-26
26
–
5,6
6.57
1.77
0.79
0.63
3.27
–
–
1.81
3.35
7.13
0.39
1.65
2.60
0.39
0.24
0.79
1.77
0.39-1,18
0.79-1.00
1.00
–
0.22
H1
Lo 1
H4
H3
Diameter of hole
Spindle adjustment range
L1 167
mm "
Length of hole spacing 1
Length of extension arm
STCHA20
Total length
Table of dimensions
H5 L5 L1
H2
L6
Lo 4 Lo 2
L4 L3 L2
Lo 3
B4
B3
B1
B2
STC-HA20
L5
L8
3D CAD drawings available on request 95
Self-adjusting toggle clamps NEW 15 IHH STC-
Push/pull clamp with horizontal base plate STC-IHH
■
■
■
■ ■
■
Movement of the handle is converted into an axial movement of the push/ pull rod Automatic distance adjustment up to 16 mm (P In.) with unchanged clamping force – without having to make manual changes to the position of the pressure screws Clamping force variable up to 2,500 N (550 lbs) depending on the adjustment of the set screw in the cantilevered joint Sturdy, tempered metal sheets for a long service life Hole pattern on the base plate facilitates fast and secure clamping set-up for metric and imperial High-quality oil resistant twocomponent plastic handle (STC-IHH15 with slip protection)
mm
STC-IHH15 STC-IHH25
"
10 16
appr. N
1100 2500
Z P
lbs.
250 550
kg
qty.
0.19 0.42
VB0003
6 6
STC-IHH 15 available from May 2013 You will find accessories on page 109
Length of base plate 2
Length of 2-comp handle
Height of handle (closed)
Height of handle (open)
Height of extension arm
Height of spindle, cpl.
Height of base
Width of extension arm (external)
Width of extension arm (internal)
Width of 2-comp. handle
Width of base plate
Length of hole spacing 1
Length of hole spacing 2
Length of hole spacing 3
L2
L3
L4
L5
L6
L7
L8
H1
H2
H3
H4
H5
B1
B2
B3
B4
Lo1
Lo2
Lo3
Lo4
Ø
–
–
16
105
45
35
46
32
107
–
–
13
8,5
–
20
42
26
13
28
26-31,75
5,5 0.22
7.13
–
–
0.63
4.13
1.77
1.38
1.81
1.26
4.21
–
–
0.51
0.33
–
0.79
1.65
1.00
0.50
1.10
1.00-1.25
225-245
–
–
23
148
64
50
53
46
160
–
–
20
12
–
26
57
25,4
25,4
38
32-44
6,3
8.86-9.65
–
–
0.91
5.83
2.52
1.97
2.09
1.81
6.30
–
–
0.79
0.47
–
1.02
2.24
1.00
1.00
1.50
1.26-1.73
0.25
STC-IHH15 H1
Lo 1 Lo 2
H5
L4
H2
L5 L1 Lo 2
STC-IHH25
B3
Lo 3
Lo 4
B4
B1
Lo 1
L5 L7 L6
96
Diameter of hole
Length of base plate 1
L1 181
Width of elongated hole
Length of base
mm "
Pressure plate diameter
STCIHH25
Spindle adjustment range
mm "
Length of extension arm
STCIHH15
Total length
Table of dimensions
L8
3D CAD drawings available on request
Self-adjusting toggle clamps
NEW
Push/pull clamp with angled base plate STC-IHA
■
mm
STC-IHA15
"
10
appr. N
1100
Z
lbs.
250
kg
0.23
qty.
VB0003
6
■
■
■ ■
■
Available from May 2013 You will find accessories on page 109
Movement of the handle is converted into an axial movement of the push/ pull rod Automatic distance adjustment up to 10 mm (Z In.) with unchanged clamping force – without having to make manual changes to the position of the pressure screws Clamping force variable up to 1,100 N (250 lbs) depending on the adjustment of the set screw in the cantilevered joint Sturdy, tempered metal sheets for a long service life Hole pattern on the base plate facilitates fast and secure clamping set-up for metric and imperial High-quality oil resistant twocomponent plastic handle with slip protection
Spindle adjustment range
Pressure plate diameter
Length of base
Length of base plate 1
Length of base plate 2
Length of 2-comp handle
Height of handle (closed)
Height of handle (open)
Height of extension arm
Height of spindle, cpl.
Height of base
Width of extension arm (external)
Width of extension arm (internal)
Width of 2-comp. handle
Width of base plate
Length of hole spacing 1
Length of hole spacing 2
Length of hole spacing 3
Width of elongated hole
L1
L2
L3
L4
L5
L6
L7
L8
H1
H2
H3
H4
H5
B1
B2
B3
B4
Lo1
Lo2
Lo3
Lo4
Ø
181
–
–
16
105
–
–
46
81
149
–
–
63
8,5
–
20
45
26
20-26
26
–
5,6
7.13
–
–
0.63
4.13
–
–
1.81
3.19
5.87
–
–
2.48
0.33
–
0.79
1.77
1.00
0.79-1.00
1.10
–
0.22
Diameter of hole
Length of extension arm
mm "
H2
L6
Lo 2
H5
H1
Lo 1
L4
STCIHA15
Total length
Table of dimensions
L5 L1
STC-IHA15 L5 B3
B4
B1
Lo 3
L8
3D CAD drawings available on request 97
Machine table clamps
Clamping to equipment and machine tables
Rapid, powerful and safe when clamping to equipment and machine tables At BESSEY you will also find a range of practical work table clamps – ideal clamps for assembly, drilling, rubbing, milling, grinding, honing, eroding, testing and much more. Original BESSEY BAS clamps are characterised above all by their incredibly compact design and high clamping pressure. The housings and clamping arms are made from tempered stainless steel and are therefore extremely heavy duty – even after many years of use and in the most restricted spaces. The work table clamps BS and the claw machine
98
clamp GRS can be tilted and are infinitely adjustable. The BS identifies a lever mechanism that facilitates quick clamping and releasing. When unobstructed access to the work area is a requirement or when clamping has to be done in confined spaces, the claw machine clamp GRS provides the necessary function thanks to an externally-positioned spindle. And, thanks to its swivelling pressure plate, the BSG work table clamp also provides the answer when clamping sloping parts, up to 35 degrees. As you can see, a comprehensive product range of products that leaves virtually no desire unanswered!
Machine table clamps
Your benefits at a glance: 1 Housings and clamping arms made from tempered stainless steel BAS clamps are approx. 30 % smaller than comparable tools made by competitors and still provide the same high clamping forces. At a perpendicular to the jaw face, the self-locking worm gear unit exerts up to 16,000 N. 2 Clamping arm variants with polyamide seal To provide for gentle clamping with optimum weight distribution, the short and long clamping arms of the BAS models are equipped with a swivelling aluminium pressure shoe. And when clamping has to be done in corners, BSP models equipped with a pointed clamping arm are the perfect tools. A special polyamide seal protects the interior against dirt.
3 Open or closed fastening holes Models with an open hole can be clamped and unclamped more quickly. In closed versions, the screw, nut and clamp form a unit. All BAS clamps are easily fastened and released – thanks to the T bar wrench with an integrated hexagon ball head. 4 Space saving and adjustable The compact design, both in height and surface requirements, distinguishes all of the models. Clamping height (up to 100 mm) can be increased progressively in 80 mm steps with the BESSEY BASO base unit. When using more than one base unit, care must be taken to provide precise workpiece contact surfaces.
99
Machine table clamps
BAS-C compact clamp, fixing hole open
mm
BAS-C9-4 BAS-C10-6 BSP-C10-6
■ ■ ■
mm
88 97 97
40 60 60
kg
qty.
VB0003
kg
qty.
VB0003
1.30 1.30 1.30
1 1 1
Clamping force up to 16,000 N Space-saving design Fixing hole open for M 10 / M 12
BAS-CB compact clamp, fixing hole closed
mm
BAS-CB9-4 BAS-CB10-6 BSP-CB10-6
mm
88 97 97
40 60 60
1.30 1.30 1.30
1 1 1
r
■ ■
SW 11
Clamping force up to 16,000 N Space-saving design Fixing hole closed for M 10 / M 12
4,5
■
18 x 23
H
a
SW 6
a1
b1
b
100
95 x 35
Machine table clamps
Base unit BASO Clamping height
Fastening thread
For socket head screw DIN 912
M 10
M10 / M12
mm
BASO
80
kg
0.45
qty.
VB0003
1
Centring attachment
Fastening thread
Fastening hole open
80
■ ■ ■
9
M12
14
M10
■
80 mm extension Stackable Fastening hole open, including cheese head screw Suitable for all BESSEY BAS clamps
95 x 35
BASKN wrench with T-bar Width across flats, Width across flats, Tommy bar allen key ball allen key length
BASKN
WAF 11
WAF8+WAF10
mm
kg
230
0.38
qty.
VB0003
1
230
SW8
45,5
SW10
■ ■
SW11
T bar wrench with adjustment tool for M 10/M 12 socket head screws Suitable for all BESSEY BAS clamps
Table of dimensions BAS Opening max. "a"
Opening opt. "a1"
Throat depth
Distance
"b"
"b1"
"r"
Housing height "H"
mm
mm
mm
mm
mm
mm
DIN 912
88
42
40
36,5
75
78
M10 / M12
BAS-C10-4
97
42
60
36,5
94
78
M10 / M12
12.000
BSP-C10-6
97
42
60
36,5
94
78
M10 / M12
12.000
BAS-CB9-4
88
42
40
36,5
75
78
M10 / M12
BAS-CB10-6
97
42
60
36,5
94
78
M10 / M12
12.000
BSP-CB10-6
97
42
60
36,5
94
78
M10 / M12
12.000
BASO
80
-
-
-
-
80
M10 / M12
OrderNo. BAS-C9-4
Clamping arm
Socket head screws
Fastening hole
Clamping force max.
open
16.000
N
closed
open
16.000
-
101
Machine table clamps
Hold down table clamps BS Clamping height max.
BS2N BS3N BS4N BS5N BS6N
■ ■ ■
mm
mm
100 19,5 x 9,5 120 22 x 10,5 120 28 x 11 140 30 x 15 140 30 x 15
mm
kg
10,5 13 16,5 16,5 16,5
Clamping force up to 10,000 N Tilting and infinitely height-adjustable For drilling and light milling work Lever mechanism for rapid clamping and release
1.35 1.55 2.65 3.30 4.00
qty.
1 1 1 1 1
VB0003
x
H1
■
mm
200 200 200 240 500
LxB a
b y
F
Claw machine clamp GRS Clamping height max.
GRS20-12
mm
200
mm
mm
appr.
mm
kg
qty.
123-140 28 x 11 7500 16,5 2.95 1
VB0003
■ ■
■
102
Clamping force up to 7,500 N Swivelling, vertically infinitely adjustable clamp Externally-positioned spindle to allow unobstructed access to the work area and clamping in confined spaces For drilling and light milling work
b (min.) a
■
H1
x
b (max.)
y
F
Machine table clamps
Hold down table clamps BSG Clamping height max.
BSG21-14
mm
mm
210
mm
140
mm
30 x 15
16,5
kg
3.22
qty.
1
VB0003
122
x
■
H1
■ ■
Ø 40
b
Clamping force up to 12,000 N For fastening to tables and other equipment Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35°
a
115 Ø
F
Table of dimensions BS, GRS, BSG Foot "F" Opening max.
Throat depth
Height of base
Pressure plate dimensions
"a"
"b"
"H1"
"L x B"
mm
mm
mm
200
100
260
BS3N
200
120
260
BS4N
200
120
270
BS5N
240
140
BS6N
500
GRS-20-12 BSG21-14
OrderNo.
BS2N
Rail profile
Fastening hole
Achievable clamping force at a clamping height of 50 mm
Foot length
Foot width
Foot height
Distance to the rail "y"
mm
mm
mm
mm
mm
mm
mm
N
42 x 25
100
38
25
32
19,5 x 9,5
10,5
3.500
42 x 25
100
38
25
32
22 x 10,5
13
5.500
48 x 31
135
49
33
42
28 x 11
16,5
7.500
320
48 x 31
135
49
33
42
30 x 15
16,5
10.000
140
580
48 x 31
135
49
33
42
27 x 13
16,5
10.000
200
123-140
265
25 x 35
135
48
33
42
28 x 11
16,5
7.500
210
140
322
Ø 40
135
48
33
42
30 x 15
16,5
12.000
"Ø"
103
Metal angle clamps
Clamping angles and mitres
Unhindered access to workpiece during welding and assembly work The original BESSEY metal angle clamps have been especially developed for use in steel construction, welding and metalworking. Their wide range of applications includes e.g. holding, fixing and
104
aligning materials at an exact right angle. The clear working area means that you can access the workpiece unhindered during welding and assembly work, and when fixing T-joints. That's why the original BESSEY metal angle clamp is a must for every workshop.
The metal angle clamp WSM – for holding workpieces – including workpieces of different thicknesses – at a precise 90° angle.
Metal angle clamps
Your benefits at a glance: 1 Automatic adjustment The spindle nut with articulated bearing allows automatic adjustment of the pressure jaws for different workpiece resistances. 2 Open working area The open passage makes it possible to fix T-fasteners and ensures free access to the workpiece for welding and assembly work. 3 Stable base and clamping jaws The stable base and the clamping jaws are manufactured from high-quality cast iron for high clamping power. They are zinc-coated and thus protected against corrosion. The jaws are processed for precise right-angled clamping. 4 Copper-plated spindle The spindle with acme thread is copperplated to prevent the adhesion of welding spatter.
Welders' angle clamps WSM
■ ■
Current passage max.
WSM9 WSM12
mm
2 x 90 2 x 120
mm
60 100
mm
35 61
mm
110 120
kg
3.80 7.80
qty.
1 1
VB0003
■ ■
Automatic adjustment to workpieces of various thicknesses Sturdy jaws and base plate made from high-quality cast iron The copper-plated spindle prevents welding splatter from sticking Precise 90°-angles
Welding clamp set SM 10
■
SM10-SET
5°-180°
mm
100
mm
35
kg
10.66
qty.
1
VB0003 ■ ■ ■
Clamping aid for clamping components of different thicknesses at any chosen angle Sturdy body and base plate made from high-quality cast iron The copper-plated spindle prevents welding splatter from sticking Angle range: 5°-180°
105
Grip pliers
Clamping and gripping
Many variants to cover a very wide range of applications Whether for all-round or step-over clamping, or for fixing workpieces which are lying next to one another: the original BESSEY grip pliers are always ideal. This is because the infinitely adjustable plier
106
jaws lie parallel to each other in every position, or at the desired angle to one another. And the best thing is: the selected clamping pressure remains constant however wide open the mouth of the pliers is. That's true whatever variant you choose. Try it out!
The pipe grip GRZRO – secure clamping of round workpieces thanks to infinitely adjustable plier jaws.
Grip pliers
Parallel grip GRZ
GRZ10 GRZ20
mm
mm
100 200
kg
65 65
qty.
1.00 1.20
10 10
VB0003
■ ■ ■
Parallel jaw faces Prism recess for small round parts Includes pressure caps for gentle clamping of sensitive surfaces
C-grip GRZC
GRZC
mm
mm
110
mm
80
40
kg
1.10
qty.
10
■
For step-over clamping from both sides
■
Throat depth and opening are infinitely adjustable thanks to split sliding arm For clamping work pieces of different thicknesses, or non-aligned work pieces
VB0003
Variogrip GRZV
GRZV
mm
100
mm
mm
50-80
43
kg
1.25
qty.
10
VB0003
■
Pipe grip GRZRO For pipes Ø
GRZRO
mm
0 – 110
■
mm
65
kg
1.30
qty.
10
VB0003
■ ■ ■
Ideal for holding round objects of constant diameter Includes pressure caps Gentle clamping of sensitive surfaces Suitable for tack welding, heatresistant up to 200° C
107
Earth (ground) clamps
Earth (ground) clamp LP / TP with tried-and true wooden handle ■ ■ ■
With malleable cast iron arms Ergonomically shaped wood handle Grounding connection hole in the upper part
LP-1 TP-1
mm
150 150
mm
60 80
mm
20 x 5 25 x 6
mm
A
10,5 10,5
300 400
kg
qty.
VB0001
kg
qty.
VB0001
kg
qty.
VB0001
kg
qty.
VB0001
qty.
VB0001
0.50 0.78
10 10
Earth (ground) clamp LP / TP with thumb screw ■ ■ ■
With malleable cast iron arms Practical thumb screw Grounding connection hole in the upper part
LP-1F TP-1F TP-2F
mm
150 150 150
mm
60 80 60
mm
20 x 5 25 x 6 30 x 8
mm
A
10,5 10,5 11
300 400 600
0.53 0.78 1.20
10 10 20
Earth (ground) clamp TP with tommy bar ■ ■ ■
With malleable cast iron arms Tommy bar with rounded ends for simple transfer of force when clamping Grounding connection hole in the upper part
TP-1K
mm
150
mm
80
mm
25 x 6
mm
A
10,5
400
0.75
10
Earth (ground) clamp TGP ■ ■
With malleable cast iron arms Grounding connection hole at end of rail
TG-P12 TG-P20
mm
120 200
mm
60 100
mm
20 x 5 27 x 7
mm
A
10,5 13
200 350
0.42 1.08
10 10
Earth (ground) clamp CP ■
With C-shaped malleable cast iron arms CP-F CP10K
108
mm
50 100
mm
30 75
mm
8,4 10,5
A
200 300
kg
0.19 0.83
10 10
Accessories
Multi angle pad VAD (2 pcs./bag) Jaw face width
VAD
from 60° inner to 60° outer
mm
kg
qty.
45
0.48
1
VB0003
■ ■ ■
For adaptation to round, oval and angular workpieces in particular Infinite angle adjustment from 60° inner to 60° outer Suitable for original BESSEY malleable cast iron screw clamps TG as well as GZ and GMZ from 100 mm throat depth
Pipe clamping set RO Length of the clamping prisms
For pipes Ø
mm
mm
kg
RO 170 100 – 400 1.39 Contents: 4 clamping prisms, 4 socket head screws
qty.
1
VB0001
■ ■ ■
Ideal for clamping round or oval workpieces Easy to fit Suitable for original BESSEY malleable cast iron screw clamps with a throat depth of 100 to 200 mm
109
Accessories
2-component plastic handle, incl. high-quality steel pressure plate with protective cap ■ ■ ■ ■ ■
Modern, symmetrical shape for optimum control and maximum grip Integral thumb grip Simulated turning motion feel built into handle Pressure plates can be replaced by hand – no need for tools Soft protective cap for non-slip, gentle clamping
Suitable for VB0003
3101179
TG / GZ / GMZ with throat depth 80 mm
3101182
TG / GZ / GMZ with throat depth 100 mm
3101186
TG with throat depth 120 mm / GZ25 / GZ...-12 / GM25Z
3101187
TG with throat depth 140-175 mm / TGK / ≥ GZ30 / ≥ GM30Z
Wood handle, incl. high-quality steel pressure plate with protective cap ■ ■ ■ ■
Ergonomically shaped wood handle Integral thumb grip Pressure plates can be replaced by hand – no need for tools Soft protective cap for non-slip, gentle clamping
Suitable for VB0003
3101386
TG / GZ / GMZ with throat depth 100 mm
3101389
TG with throat depth 120 mm / GZ25 / GZ...-12 / GM25Z
3101390
TG with throat depth 140-175 mm / TGK / ≥ GZ30 / ≥ GM30Z
Tommy bar accessory KA (2 pcs./bag)
■ ■
Made from soft, hand-friendly plastic On a retail backer card
Suitable for VB0003
3101194
TG-K / GZ-K from throat depth 100 mm, TGK-K, TGNT-K, SPZ60K, GU25-12-6ZK, KT8-3
3101195
SGM, SGTM, SGU, SPZ80K, BSG, SGS
Complete spindle set ■ ■
Soft protective cap for non-slip, gentle clamping Nickel-plated spindle to protect from corrosion
Suitable for
3101588 3101589 3101627
110
STC-HH70 STC-HH50, STC-IHH25 STC-HH20, STC-HV20, STC-HA20, STC-IHA15, STC-IHH15
VB0003
Accessories
Replaceable pressure plate made from quality steel with protective cap (4 pcs./bag) ■
Suitable for VB0003
3101180
TG / GZ / GMZ with throat depth 80 mm
3101183
TG / GMZ with throat depth 100-120 mm GZ20 to GZ25 / GZ...-12
3101188
TG with throat depth 140-175 mm / TGK / ≥ GZ30 / ≥ GM30Z / SG30-VAD
■ ■
Exceptionally well-suited to welding tasks Galvanised for optimum protection from rust Soft protective cap for non-slip, gentle clamping
Clamping force indicator FIN* red / green
Suitable for
kN
TG with throat depth 100-120 mm FIN250 2,5 GZ20 to GZ25 GM20Z to GM25Z FIN350
TG with throat depth 140-175 mm TGK / ≥ GZ30 / ≥ GM30Z
3,5
■
mm kg qty.
VB0003 ■
32 0.10 1
■ ■
38 0.15 1
* While stocks last
Increased clamping safety by means of information if a defined clamping force is not reached Green zone size approx. 2,500 N and 3,500 N clamping force Red zone below approx. 2,500 N and 3,500 N clamping force No tool required for conversion between clamping force indicator and standard pressure plate
Pressure plate for high-performance clamps Description
Suitable for VB0003
3100736
Standard
High-performance clamps SLM, SGM, STBM, STBVC, SGU, STBU, SPZ80K
3100737
Standard
High-performance clamp STBS
3101192
Serrated
High-performance clamps SLM, SGM, STBM, STBVC, SGU, STBU, SPZ80K
3101193
V-grooved
High-performance clamps SLM, SGM, STBM, STBVC, SGU, STBU, SPZ80K
Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35° Three design versions:
■
■ ■ ■
Smooth faced (standard version) Rough faced for secure clamping on dirty surfaces V-groove face for round, oval and edged workpieces
111
Accessories
Protective cap set ■ ■
Soft plastic cap for non-slip, gentle clamping Fits on upper and lower parts of clamps
Content per unit
Suitable for
pcs.
3101393
TG with throat depth 80 mm
2 x 10
3101394
TG with throat depth 100 mm
2 x 10
3101395
TG with throat depth 120 mm
2 x 10
3101396
TG with throat depth 140-175 mm
2 x 10
VB0003
Pressure cap strips SKS (2 pcs./bag) ■ ■ ■ ■
For screw clamps For gentle clamping May be applied on both sides Cut them to size
Suitable for VB0003
SKS10/20
TG10 to TG20 / GZ10 to GZ20 / GM16Z to GM20Z
SKS20/40
TG20 to TG40 / TGK / GZ20 to GZ60 / GM20Z to GM60Z
DuoKlamp Extender DKX* ■ ■ ■
Accessory for increasing the clamping and spreading capacity of DuoKlamps Set up requires only a few movements of the accessory pieces Retail-ready packaging
DKX
mm
50
mm
70
mm
200-1800
kg
1.85
qty.
VB0003
qty.
VB0003
1
*Available while stocks last
Table clamp
■ ■
112
Especially for DIY applications and domestic appliances Special accessory for angle clamps WS 3/WS 6, screw clamp S 10 and K Body clamps REVO KR/KRV to hold them to a work surface edge
TK 6 RB 269 LM 10/5R8
TK6 RB269 LM10/5R8
mm
8 8 8
mm
60 60 100
mm
22 28 50
kg
0.10 0.19 0.22
10 1 1
Accessories
K Body Extender KBX ■
Suitable for
KBX20
kg
KRV / KR / K
qty.
0.75
12
VB0003 ■
■
Connect any two K Body clamps to increase the clamping capacity. The connector is made of robust aluminum. Comes with two red adapters. Use with Series KRV/KR. Not required for joining Series K. Retail-ready packaging
Variable jaw KR-VO ■
Suitable for
KR-VO
kg
KRV / KR / K
qty.
0.59
1
VB0003 ■ ■ ■
Steplessly adjustable and fixable upper section for improved workpiece positioning Very large parallel clamping surfaces With 2 pressure caps to protect delicate surfaces Can be converted to spreading function with no need for tools
Tilting K Body clamp adapter KR-AS (2 pcs./bag) Suitable for
KR-AS
KRV / KR
mm
170
mm
25
kg
0.18
qty.
12
VB0003
■ ■ ■
Adapter with tilting clamping jaws with a tilt range of -15° to +15° Clamping on sloping and parallel surfaces Retail-ready packaging
Framing set KP ■
Suitable for
KP
KRV / KR / K
Contents: 4 rail couplings and 4 adapters
kg
0.55
qty.
1
VB0003 ■ ■ ■
KP Framing System (from 30 cm to 250 cm/12"–98") with four 90° KP Blocks Separately adjustable clamping force with 2 inserted clamps per corner Lightweight / easy to assemble Retail-ready packaging
113
POS Presentation
Clamp trolley ZW 1, unstocked ■ ■ ■ ■ ■
Stable metal construction on castors Holds approximately 90 blades Dimensions: 50 x 60 x 146 cm With label and label holder Suitable as sales aid and for the workshop area
Width x depth x height
ZW1
mm
500x600x1460
kg
VB0003
kg
VB0003
kg
VB0003
16.50
Clamp trolley ZW 2, unstocked ■ ■ ■ ■ ■
Stable metal construction on castors It even holds long screw clamps Dimensions: 100 x 60 x 153 cm With label and label holder Suitable as sales aid and for the workshop area
Width x depth x height
ZW2
mm
1000x600x1525
33.00
Demonstration trolley VFW, unstocked ■ ■ ■
114
Specially developed for sales and demonstration purposes Dimensions: 50 x 60 x 146 cm With label and label holder
Width x depth x height
VFW
mm
500x600x1460
28.60
POS Presentation
Clamp trolley ZW 1, stocked ■
Layout
■
kg
ZW1-A01
All-steel screw clamps 5 x GZ12, 5 x GZ16, 5 x GZ20, 5 x GZ25, 5 x GZ30, 3 x GZ40, 2 x GZ50, 2 x GZ60, 1 x GH16, 1 x GH20
57.00
All-steel screw clamps 2K 5 x GZ12-2K, 5 x GZ16-2K, 5 x GZ20-2K, 5 x GZ25-2K, 5 x GZ30-2K, 3 x GZ40-2K, 2 x GZ50-2K, 2 x GZ60-2K, 1 x GH16, 1 x GH20
57.00
ZW1-A01-2K
■
■
Stable metal construction on castors Dimensions 50 x 60 x 146 cm Malleable cast iron-, all-steel- and lever clamps with clamping ranges between 120 and 600 mm With label and label holder
Malleable cast iron screw clamps 2K 5 x TG12-2K, 5 x TG16-2K, 5 x TG20-2K, 5 x TG25-2K, ZW1-A99-2K 65.00 5 x TG30-2K, 3 x TG40-2K, 2 x TGK50-2K, 2 x TGK60-2K, 1 x GZ16-2K, 1 x GZ20-2K
Clamp trolley ZW 2, stocked ■
Layout kg
ZW2-A99
Malleable cast iron screw clamps 10 x TG20, 10 x TG25, 5 x TG30, 5 x TG40, 5 x TGK60, 3 x TGK80, 154.30 2 x TGK100, 2 x TGK125, 2 x TGK150, 2 x TGK200, 2 x GZ20, 2 x GZ25
VB0001
■ ■
■
Stable metal construction on castors Dimensions 100 x 60 x 153 cm Malleable cast iron and all-steel with clamping ranges between 200 and 2000 mm With label and label holder
Malleable cast iron screw clamps 2K 10 x TG20-2K, 10 x TG25-2K, 5 x TG30-2K, 5 x TG40-2K, ZW2-A99-2K 154.30 5 x TGK60-2K, 3 x TGK80-2K 2 x TGK100-2K, 2 x TGK125-2K 2 x TGK150-2K, 2 x TGK200-2K 2 x GZ20-2K, 2 x GZ25-2K
POS Presentations We will gladly provide you with various range and presentation recommendations on request. Simply tell us about your customers – and we will tell you which product presentation suitable and which presentation materials, such as tool hooks, labels and mounting rails you require. For all-round professional product presentation and an effective boost for your sales. Just ask us!
115
BESSEY Cutting Technology
Product range 2013/2014
116
Technological edge thanks to the most innovative ideas and highest quality You can find all information regarding cutting in the subsequent pages in a structured and lucid manner.
From handsnips with leverage to special tools for sheet metal work – and plumbing. And you will observe that BESSEY always offers you the best solution for all your tasks and applications. Enjoy browsing through!
117
BESSEY Cutting Technology
Lexicon 1. Types
2. Models
Normal metal snips
Ideal snips
In normal metal snips, edges and handle are traditionally forged into one unit. The force required for cutting is determined by the ratio of edge length to the handle length.
Handsnips with leverage
These snips live up to their name. Because, ideal snips are real "all-rounders". They can cut through a metal sheet (straight-cut) as well as cut large and small contours or radii (outlinecut). In this case, it does not matter whether you are cutting at the edge (edge cut) or at the centre of a sheet. You can naturally use ideal snips for notching-operations.
Outline cutting snips
Outline-cutting snips are best suited when you want fine and narrow radius cuts near the edges of a metal sheet. You can use the delicately shaped edge of these snips to cut extremely narrow shapes or curves without any problem.
Handsnips with leverage comprise a cutter head and a handle. The compound action produces additional leverage.
Straight cutting snips
Do you wish to cut a metal sheet at the centre and / or near the edges? Then the perfect tool for you is the straight cutting snips. You can use long edges of this tool to cross-cut and notch large metal sheets quickly and precisely with less effort.
118
3. Right cutting or left cutting snips. What is the difference?
Left cutting snips
Right cutting snips
Right cutting snips are sharpened and designed so that they can cut right radii (i.e. a curve from left to right) easily. Left cutting snips are the best for radius cuts from right to left . The common perception is that, right cutting snips are for right-handers, and left cutting snips for left-handers. This is not true. In fact, it is the other way round. If you, a right-hander, are cutting a radius (see above, from left to right), using right cutting snips, you have to cut outwards from your wrist. With left cutting snips, (radius is then from right to left) you can cut inwards from your wrist. This is considerably more ergonomic. Try it out once!
4. Grades The service life of edges depends directly on the grades of steel used and processing. High-performance snips with case-hardened HSS-edges particularly fulfill the most stringent requirements regarding the service life and consistent cutting performance. Cutter heads of the HSS-TiN grade are additionally coated with extremely hard titanium nitride that reduces wear and tear. Other cutting materials, namely special high quality steel, high quality steel and standard quality steel, are available depending on the application and the frequency of use.
Quality of steel
min. hardness
Durability
(Rockwell C)
HSS-TiN
65
+++++
HSS
65
++++
Special high quality
61
+++
High quality steel
59
++
Standard quality steel
56
+
The high quality of the steel at the cutting edge leads to a much longer service life of the snips. Quality of steel
For maximum sheet thickness at the tensile strength of:
Normal metal snips
400 N/mm2
600 N/mm2
800 N/mm2
1100 N/mm2
1.2 mm
1.0 mm
0.8 mm
0.6 mm
High quality steel 1.2 mm D202..; D206..; D208..; D214..; D216..; D218..;
1.0 mm
0.8 mm
/
Standard quality steel D102..; D106..; D107..; D114..; D116..; D118..; 1.2 mm D146..; D159..; D70..- D77..; D122N; D122A
1.0 mm
0.8 mm
/
HSS D407..; D416..; D418..
Quality of steel
For maximum sheet thickness at the tensile strength of:
Hand snips with leverage
400 N/mm2
600 N/mm2
800 N/mm2
1100 N/mm2
HSS-TIN D27AH-TIN*
1.5 mm
1.2 mm
1.0 mm
0.8 mm
HSS D27AH*
1.5 mm
1.2 mm
1.0 mm
0.8 mm
2.0 mm 1.5 mm 1.2 mm
1.5 mm 1.2 mm 1.0 mm
1.2 mm 1.0 mm 0.8 mm
1.5 mm
1.2 mm
1.0 mm
Special high quality steel D17ASS D29SS*; D29ASS*; D29BSS* D15A High quality steel D08..; D16..; D17A; D22A; D27*; D27A*; D27B*
/
/
* snips can be stressed for up to 3 x 0.6 mm (1.8 mm) for a short period of time for cutting the seams. 119
Compound leverage snips
Higher quality work with less effort
Utilize the power of a compound lever! Drop-forged cutter heads are always tempered and the edges double hardened! This produces high durability and burr-free cuts. Ergonomic handle has
120
standard plastic coating and an anti-slip protection. Both parts are joined in such a manner that it provides additional leverage. You can do the same work quicker with much less effort. Less worker fatigue = improved production! Try it out!
Ideal snips D29ASS-2 and D27A – ideal for continuous, straight and curved cuts. The Multisnip Longstyle D22A – with angled cutter head for greater safety.
121
Compound leverage snips
Shape and straight cutting snips
■ ■ ■ ■ ■ ■
ERGO-handle for increased comfort – reduced hand fatigue! For continuous, straight and shaped cuts Compact cutter head: High manoeuvrability for shape cutting Optimised leverage ratio: 25 % less effort Optimised edge shape: No slipping even without serrations Available in right or left cutting versions
mm
D29ASS-2 D29ASSL-2 D29ASS-2-SB D29ASSL-2-SB
260 260 260 260
"
10 R 10 R 10 R 10 R
mm
33 33 33 33
"
1T 1T 1T 1T
mm
1,2 1,2 1,2 1,2
+++ +++ +++ +++
kg
0.48 0.48 0.48 0.48
qty.
VD0001
qty.
VD0001
5 5 5 5
Layout
DSET29-15
1 x D29ASS-2, 1 x D29ASSL-2 and 1 x D15A in snips pouch
1
Shape cutting snips
D29SS-2 D29SSL-2
■ ■ ■ ■
mm
"
mm
mm
"
mm
260 10 R 260 10 R
40 40
"
mm
kg
qty.
VD0001
"
mm
kg
qty.
VD0001
1O 1O
1,2 + + + 0.48 1,2 + + + 0.48
5 5
ERGO-handle for increased comfort – reduced hand fatigue! For short, straight and shaped cuts Edges with micro-serrations for slipproof working Available in right or left cutting versions Straight cutting snips
■ ■ ■ ■
122
ERGO-handle for increased comfort – reduced hand fatigue! For continuous, straight cuts Edges with micro-serrrations for slipproof working Available in right or left cutting versions
D29BSS-2 D29BSSL-2
260 10 R 260 10 R
33 33
1T 1T
1,2 + + + 0.51 1,2 + + + 0.51
5 5
Compound leverage snips
Shape and straight cutting snips ■
D27A D27AL D27A-SB D27AL-SB
mm
"
260 260 260 260
10 R 10 R 10 R 10 R
mm
"
mm
33 33 33 33
"
1T 1T 1T 1T
mm
1,2 1,2 1,2 1,2
kg
++ ++ ++ ++
0.52 0.52 0.52 0.52
++ ++ ++
0.49 0.49 0.49
qty.
5 5 5 5
VD0001
■ ■
For long continuous, straight and curved cuts Edges with micro-serrations for slipproof working Available in right or left cutting versions
Shape cutting snips
D27 D27L D27-SB
260 10 R 260 10 R 260 10 R
mm
40 40 40
"
1O 1O 1O
mm
1,2 1,2 1,2
kg
qty.
5 5 5
VD0001
■ ■ ■
For short, straight and outline cuts Edges with micro-serrations for slipproof working Available in right or left cutting versions
Straight cutting snips
D27B D27BL D27B-SB
mm
"
260 10 R 260 10 R 260 10 R
mm
32 32 32
"
1T 1T 1T
mm
1,2 1,2 1,2
++ ++ ++
kg
0.52 0.52 0.52
qty.
5 5 5
VD0001
■ ■ ■
For long continuous, straight cuts Edges with micro-serrations for slipproof working Available in right or left cutting versions 123
Compound leverage snips
Shape and straight cutting snips, robust ■ ■ ■ ■ ■
For continuous, straight and curved cuts Edges with micro-serrations for slipproof working Exceptionally robust: Drop-forged handles Painted handles Available in right or left cutting versions
D17ASS D17ASSL D17A D17AL
mm
240 240 240 240
"
mm
"
mm
"
mm
9I 9I 9I 9I
24 24 24 24
"
mm
"
mm
"
mm
1 1 1 1
1,5 + + + 1,5 + + + 1,2 + + 1,2 + +
kg
qty.
VD0001
kg
qty.
VD0001
kg
qty.
VD0001
0.55 0.55 0.55 0.55
5 5 5 5
Ideal snips, manoeuvrable
D08 D08L D08-SB D08L-SB
■ ■ ■ ■
mm
230 230 230 230
9 9 9 9
27 27 27 27
1Q 1Q 1Q 1Q
1,2 1,2 1,2 1,2
++ ++ ++ ++
0.38 0.38 0.38 0.38
++ ++
0.43 0.45
5 5 5 5
Special flat cutter head enables cutting in narrowest radius For continuous, straight and curved cuts Edges with micro-serrations for slipproof working Available in right or left cutting versions
MULTISNIP Longstyle ■ ■ ■
124
For long continuous straight and large radius cuts Extra long cutting blades, laterally displaced for continous cuts Available only in left cutting version
D22A D22A-SB
mm
280 280
11 11
64 64
2I 2I
1,2 1,2
5 5
Aviation snips
Aviation snips
D16 D16-SB
mm
240 240
"
9I 9I
mm
40 40
"
1O 1O
mm
1,2 1,2
++ ++
kg
0.38 0.39
qty.
10 10
VD0001
■ ■ ■
For short, straight and curved cuts Edges with micro-serrations for prevent slipping Left cut model available as well
Aviation snips ■
D16L D16L-SB
mm
240 240
"
9I 9I
mm
40 40
"
1O 1O
mm
1,2 1,2
kg
++ ++
0.38 0.39
++ ++
0.38 0.39
qty.
10 10
VD0001
■ ■
For short, straight and curved cuts Edges with micro-serrations for prevent slipping Right cut model available as well
Aviation snips
D16S D16S-SB
mm
240 240
"
9I 9I
mm
44 44
"
1A 1A
mm
1,2 1,2
kg
qty.
VD0001
qty.
VD0001
10 10
Layout
DSET16
1 x D16, 1 x D16L and 1 x D16S in snips pouch
1 ■
■ ■
No offset to blades, for short, straight and curved cuts with a large radius in both left and right directions Edges with micro-serrations for prevent slipping Available only in left cutting version
125
All-round snips
Compact in design, big in performance
Power through design The newly developed BESSEY small format aviation snips will win over customers with their performance. These Ideal snips offer compound leverage in a uniquely compact construction. The extremely small forged heads have optimized blade geometry
126
and fine-tuned cutting leverage and, in a much smaller overall length. The new D15A is small and manoeuvrable; perfect for cutting small radii and in confined spaces but with the strength of a full-sized aviation snip. A multi-purpose tool that will fit well in a pocket, a tool pouch or most especially the tool box.
The Ideal snips D15A – small, strong, manoeuvrable and always ready-to-hand.
All-round snips
Your benefits at a glance: 1 Extremely compact cutting head The design of the uniquely compact design head offers one tremendous manoeuvrability, the ability to cut the narrowest radii and the ability to reach some of the most difficult to access spots. 2 Practicable combination of bar and arrester A practical locking mechanism allows one to open and close with one hand and limits the maximum opening of the snip. 3 Compound leverage Compound leverage considerably reduces the effort required. Improving productivity while reducing hand fatigue for the worker. 4 Ergonomic handle The plastic grips on the ergonomically designed handles have soft cushion inserts that further reduce hand fatigue for the worker. The soft cushion inserts also keep the hand from slipping on the grips.
Shape and straight cutting snips, small and manoeuvrable
D15A D15AL D15A-SB D15AL-SB
mm
180 180 180 180
"
7 7 7 7
mm
20 20 20 20
"
S S S S
mm
1,0 1,0 1,0 1,0
+++ +++ +++ +++
kg
0.20 0.20 0.21 0.21
qty.
10 10 10 10
VD0001
Layout
■
qty.
DSET15
1 x D15A, 1 x D15S and 1 x D15AL in snips pouch
1
VD0001
■
■
■
The shape and straight cutting snips D15A and D15AL will be delivered in an attractive sales presenter. Sale to dealers in packaging units only.
■
For long continuous, straight and curved cuts The extremely small forged heads have optimized blade geometry is very manoeuvrable; perfect for cutting small radii and in confined spaces The compact design results in the highest performance with the minimum of effort ERGO-handle for increased comfort reduced hand fatigue! Available in right or left cutting versions
127
High-performance snips with HSS edges
Best solution for every application
Guaranteed high performance Made from the best grade steel with case hardened HSS cutting edges. Compared to conventional snips, these HIGH QUALITY – HIGH PERFORMANCE models will fulfill the most stringent requirements
128
regarding service life and cutting properties. Great for use on stainless steel & other hard sheet metals. Available in a wide variety of styles! Traditional designs, compound leverage designs, straight cutting, shape cutting, ideal pattern snips. The large selection makes find the right tool for the job easy!
D27AH shape and straight cutting snip – with casehardened HSS edges for considerably longer service life.
High-performance snips with HSS edges
Your benefits at a glance: 1 Longer service life Tempered drop-forged cutting heads have hardened HSS inserts for a much longer service life and performance than conventional snips. Even when cutting the harder metals like stainless steel. 2 Compound leverage Compound leverage considerably reduces the effort required. Improving productivity while reducing hand fatigue for the worker. 3 Ergonomic handle The plastic grips on the ergonomically designed handles have soft cushion inserts that further reduce hand fatigue for the worker. The soft cushion inserts also keep the hand from slipping on the grips.
HSS-TiN shape and straight cutting snips
D27AH-TIN D27AHL-TIN
mm
"
260 10 R 260 10 R
mm
33 33
"
1T 1T
mm
kg
1,2 + + + + + 0.52 1,2 + + + + + 0.52
qty.
1 1
VD0003
■
■ ■ ■
TiN coated cutter head for longer service life even in case of hard materials Case-hardened HSS edges For continuous, straight and curved cuts Available in right or left cutting versions
129
High-performance snips with HSS edges
HSS shape and straight cutting snips
D27AH D27AHL
■ ■ ■
mm
"
mm
"
mm
260 10 R 260 10 R
33 33
"
mm
"
mm
1T 1T
1,2 1,2
kg
qty.
VD0003
kg
qty.
VD0003
+ + + + 0.52 + + + + 0.52
1 1
For continuous, straight and curved cuts Edges made of case-hardened HSS Available in right or left cutting versions
HSS punch snips
D407-275 D407-275L D407-300 D407-300L
■ ■ ■ ■
130
For short, straight and curved cuts Edges made of case-hardened HSS PVC dipped handles Available in right or left cutting versions
mm
275 275 300 300
11 11 12 12
42 42 43 43
1P 1P 1Ü 1Ü
1,0 1,0 1,0 1,0
++++ ++++ ++++ ++++
0.53 0.53 0.60 0.60
1 1 1 1
High-performance snips with HSS edges
HSS shape and straight cutting snips
D416-280 D416-280L
mm
280 280
"
11 11
mm
34 34
"
1Z 1Z
mm
1,0 1,0
kg
+ + + + 0.58 + + + + 0.58
qty.
1 1
VD0003
■ ■ ■ ■
For long continuous, straight and curved cuts Cutting edges made of case-hardened HSS PVC dipped handles Available in right or left cutting versions
HSS pelican snips ■
D418-300 D418-350
mm
300 350
"
12 14
mm
62 65
"
2U 2O
mm
1,0 1,0
kg
+ + + + 0.66 + + + + 0.80
qty.
1 1
VD0003
■ ■ ■
For long continuous straight cuts Cutting edges made of case-hardened HSS PVC dipped handles Available only in right cutting version
131
Standard tin snips
Traditional style tin snips
Proven, robust and reliable Standard tin snips are robust and reliable. For any application or any material: The wide range of standard tin snips guarantees that you will find
132
the right edge shape and cutting grade for your application. Completely forged, exceptionally robust and absolutely reliable. You can rely on them with certainty!
Standard tin snips D216 – Its a classic. Ideally suited for long continuous, straight and curved cuts.
Standard tin snips
Your benefits at a glance: 1 Forged cutter head and handle Cutter head and handle are drop-forged as a single unit. This is what makes them so robust and reliable. 2 Induction hardened cutting edges Extra hard cutting edges guarantee more increased durability and optimal cutting results. 3 Bolted joint All conventional metal snips can be disassembled for easy sharpening, thus extending their service life!
Shape and straight cutting snips
■ ■ ■
D216-260 D216-260L D216-280 D216-280L D116-260 D116-260L D116-260-SB D116-260L-SB D116-280 D116-280L D116-280-SB D116-280L-SB
mm
260 260 280 280 260 260 260 260 280 280 280 280
"
10 R 10 R 11 11 10 R 10 R 10 R 10 R 11 11 11 11
mm
30 30 34 34 30 30 30 30 34 34 34 34
"
1E 1E 1Z 1Z 1E 1E 1E 1E 1Z 1Z 1Z 1Z
mm
1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0
++ ++ ++ ++ + + + + + + + +
kg
0.49 0.49 0.58 0.58 0.49 0.49 0.49 0.49 0.58 0.58 0.58 0.58
qty.
VD0002
qty.
VD0002
5 5 5 5 5 5 5 5 5 5 5 5
■
For continuous, straight and curved cuts D216 – Painted handles D116 – PVC dipped handles Available in right or left cutting versions
Layout
DSET-SF3
1 x D216-280, 1 x D216-280L and 1 x D218-300 in snips pouch
1
133
Standard tin snips
Pelican snips
■ ■ ■ ■ ■
For long, straight and continuous cutting Extra long blade is ideal for cutting through metal sheets Available as right cutter (in 300 mm dimension also available as left cutter) D218 – Painted handles D118 – PVC dipped handles
D218-300 D218-300L D218-300-SB D218-300L-SB D218-350 D118-300 D118-300L D118-300-SB D118-300L-SB D118-350
mm
300 300 300 300 350 300 300 300 300 350
"
mm
"
mm
12 12 12 12 14 12 12 12 12 14
62 62 62 62 65 62 62 62 62 65
"
mm
"
mm
2U 2U 2U 2U 2O 2U 2U 2U 2U 2O
1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0
kg
qty.
VD0002
kg
qty.
VD0002
++ ++ ++ ++ ++ + + + + +
0.73 0.73 0.73 0.73 0.80 0.73 0.73 0.73 0.73 0.80
++ ++ ++ + + +
0.47 0.47 0.58 0.47 0.47 0.47
5 5 5 5 5 5 5 5 5 5
Shape cutting punch snips
D214-250 D214-250L D214-275 D114-250 D114-250L D114-250-SB ■ ■ ■ ■ ■
134
For short, straight and curved cuts (especially small radii) Very slick cutting head Available in right or left cutting versions D214 – Painted handles D114 – PVC dipped handles
mm
250 250 275 250 250 250
10 10 11 10 10 10
37 37 43 37 37 37
1U 1U 1Ü 1U 1U 1U
1,0 1,0 1,0 1,0 1,0 1,0
5 5 5 5 5 5
Standard tin snips
Punch snips
D207-250 D207-250L D207-275 D207-275L D207-300 D207-300L D107-225 D107-225-SB D107-250 D107-250L D107-250-SB D107-250L-SB D107-275 D107-275L D107-275-SB D107-300 D107-300L
mm
250 250 275 275 300 300 225 225 250 250 250 250 275 275 275 300 300
"
10 10 11 11 12 12 9 9 10 10 10 10 11 11 11 12 12
mm
42 42 42 42 47 47 38 38 42 42 42 42 42 42 42 47 47
"
1P 1P 1P 1P 1D 1D 1I 1I 1P 1P 1P 1P 1P 1P 1P 1D 1D
mm
1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0
kg
++ ++ ++ ++ ++ ++ + + + + + + + + + + +
0.49 0.49 0.55 0.55 0.60 0.60 0.37 0.37 0.49 0.49 0.49 0.49 0.55 0.55 0.55 0.60 0.60
++ ++
0.51 0.51
qty.
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
VD0002
■ ■ ■ ■
For short, straight and curved cuts Available in right or left cutting versions D207 – Painted handles D107 – PVC dipped handles
Punch snips with curved blades D 208
D208-275 D208-275L
mm
275 275
"
11 11
mm
40 40
"
1O 1O
mm
1,0 1,0
kg
qty.
5 5
VD0002
■ ■ ■ ■
Especially for circular cuts Semi-circular edges Available in right or left cutting versions Painted handles
135
Standard tin snips
Universal snips ■ ■ ■ ■
For straight and curved cuts Available only in right cutting version D206 – Painted handles D106 – PVC dipped handles
D206-250 D106-250 D106-250-SB
mm
250 250 250
"
10 10 10
mm
68 68 68
"
mm
"
mm
2 Ü 1,0 2 Ü 1,0 2 Ü 1,0
kg
qty.
VD0002
kg
qty.
VD0002
++ + +
0.43 0.43 0.44
+ +
0.39 0.39
5 5 5
Universal snips with wide blade ■ ■ ■
136
For straight and curved cuts (large radii) Available only in right cutting version PVC dipped handles
D106A-250 D106A-250-SB
mm
250 250
"
10 10
mm
67 67
2P 2P
1,0 1,0
5 5
Standard tin snips
Berlin pattern snips
D202-250 D202-300 D102-225 D102-250 D102-250-SB D102-300 D102-300-SB
mm
250 300 225 250 250 300 300
"
10 12 9 10 10 12 12
mm
60 79 55 60 60 79 79
"
2Z 3 2E 2Z 2Z 3 3
mm
1,0 1,0 1,0 1,0 1,0 1,0 1,0
++ ++ + + + + +
kg
0.48 0.72 0.44 0.48 0.48 0.72 0.72
qty.
5 5 5 5 5 5 5
VD0002
■ ■ ■ ■
For straight cuts Available only in right cutting version D202 – Painted handles D102 – PVC dipped handles
English pattern snips
D159-200 D159-250 D159-300 D159-350
mm
200 250 300 350
"
8 10 12 14
mm
46 57 68 70
"
1D 2R 2Ü 2A
mm
1,0 1,0 1,0 1,0
+ + + +
kg
0.29 0.49 0.63 0.83
qty.
6 6 6 6
VD0002
■ ■ ■
For straight cuts Available only in left cutting version Painted handles
American pattern snips ■
D146-200 D146-250 D146-300 D146-350
mm
200 250 300 350
"
8 10 12 14
mm
41 54 68 72
"
1P 2W 2Ü 2S
mm
1,0 1,0 1,0 1,0
+ + + +
kg
0.32 0.47 0.67 0.77
qty.
6 6 6 6
VD0002
■ ■
For straight cuts Available only in left cutting version PVC dipped handles
137
Safety strap cutter
One-handed cutting of strong steel straps
138
Secure – with just one hand!
Your benefits at a glance:
With the D123S BESSEY offers you the unique, singlehanded operation steel strap cutter, which can even cut through 32 x 1 mm hardened steel straps. This means that over half of all commonly-used packaging straps can be cut, for example, steel strapping on wooden crates. With an overall length of just 260 mm it is very short and so light and easy to handle. The cutter head is flat formed and can be easily slid underneath tightly tensioned straps. During the cutting process a retainer holds the strap tightly and thus prevents it from springing up dangerously. If you are looking for safe handling using only one hand, then the D123S is unbeatable – simply peerless!
1 Tempered cutter head The tempered fine-cast cutter head cuts steel straps up to 32 x 1 mm. The cutting edge is induction hardened for long service life. 2 Strap holding element The strap holding element, made of polymer material, firmly holds the strap down while it is cut, preventing it from snapping upwards. For your safety.
3 Compound leverage Compound leverage reduces the effort required considerably. This improves productivity while reducing hand fatigue for the worker. 4 Ergonomic handle The plastic grips on the ergonomically designed handles have soft cushion inserts that further reduce hand fatigue for the worker. The soft cushion inserts also keep the hand from slipping on the grips.
Steel strap cutters
Safety strap cutter with compound leverage
D123S D123S-SB
mm
260 260
"
10 R 10 R
mm
38 38
"
1I 1I
kg
0.55 0.60
qty.
5 5
VD0002
■ ■ ■
Cutting of steel straps up to 32 x 1 mm with just one hand Holds banding tightly during cutting to prevent banding from springing up ERGO-handle for increased comfort – reduced hand fatigue!
Steel strap cutter ■
D122N
mm
225
"
9
mm
31
"
1R
kg
0.40
qty.
5
VD0002
■ ■ ■
The lower holder prevents band ends from springing up For band width up to 25 mm, band thickness up to 0.6 mm Flat lower jaw easily slips under taut banding Painted handles
Steel strap cutter ■
D122A D122A-SB
mm
260 260
"
10 R 10 R
mm
30 30
"
1E 1E
kg
0.42 0.43
qty.
5 5
VD0002
■ ■ ■
Flat lower jaw easily slips under taut banding High price to performance ratio For band width up to 25 mm, band thickness up to 0.6 mm PVC dipped handles
139
Nibbler
Distortion-free cutting of sheet metal Your benefits at a glance: 1 Cutting head Cutting head with open die-plate for easy run-out of sheet metal with chip remover. It is possible to cut even the smallest of radii, down to min 25 mm, without a problem. 2 Transparent chip protection screen The transparent plastic chip protection screen feeds the removed chips towards the front. This is for increased working safety. 3 Ergonomic handle The anti-slip insert and plastic coating ensure that the ergonomically designed handle fits perfectly in the hand and has a very good grip.
Nibbler Description
D24 D24-SB D241 D242 ■
■ ■ ■ ■
140
For distortion-free cuts of up to 1.2 mm in normal sheet metal (max. 400 N/ mm2) and 0.8 mm in high quality steel (max. 800 N/mm2) Cutting radii min. 25 mm Clean, burr-free cutting of both egdes, no deformation of surfaces With integrated chip-separator for cleanly cut notches For cutting inside the sheet metal, starting hole of 8.5 mm is necessary
Nibbler Nibbler Replacement blades Spare mould
mm
265 265 -
"
10 I 10 I -
kg
0.48 0.48 0.02 0.03
qty.
5 5 1 1
D 241 D 24
D 242
VD0002
Multi-purpose cutters
General purpose snips
D48A-2 combi-snips – multi-purpose comfort with angled edges. The D49-2 Electricians' scissors – for multicore cables with diameter up to 10 mm.
Universal range of services – and applications These versatile multi-purpose snips are equally at home in the toolbox, kitchen gadget drawer or garden shed. Always and everywhere. The hard stainless steel blades are well suited both for cutting thin metal sheets as well as a variety of
soft materials such as paper, fabrics and cardboard. Also works well for cutting flowers and light pruning. The handles are plastic with a soft cushion insert for comfort and to prevent slipping. Ergonomic design makes this snip a pleasure to use!
141
Multi-purpose cutters
Multi-purpose cutters ■ ■ ■
ERGO-handle for increased comfort – reduced hand fatigue! Stainless steel blades On carded hang pack
D47-2 D48-2
mm
140 190
"
mm
"
mm
5I 7I
"
31 42
1R 1P
kg
qty.
VD0002
kg
qty.
VD0002
0.05 0.11
15 10
Angled combi snips
■ ■ ■ ■
ERGO-handle for increased comfort – reduced hand fatigue! Stainless steel blades Offset blades On carded hang pack
D48A-2
mm
190
7I
"
36
1Z
0.11
10
Cable cutters
■ ■ ■ ■
ERGO-handle for increased comfort – reduced hand fatigue! For multicore cables with diameter up to 10 mm Stainless steel blades On carded hang pack
D49-2
mm
"
165
kg
6I
qty.
0.12
VD0002
10
MULTISNIP Master
■ ■ ■
■
142
For long continuous straight and curved cuts All metal parts are made of stainless steel Handle made of robust fibreglassreinforced plastic with a soft material insert On carded hang pack
D51A
mm
235
"
9R
mm
50
"
2
mm
0,4
kg
0.22
qty.
5
VD0002
Multi-purpose cutters
Multi-purpose cutters ■
D47 D48
mm
140 190
"
mm
5I 7I
31 42
"
1R 1P
kg
0.08 0.13
qty.
15 10
VD0002
■ ■
Stainless steel blades Edges with serrations for slip-proof working On carded hang pack
Angled combi snips ■
D48A
mm
190
"
mm
7I
38
"
1I
kg
0.11
qty.
10
VD0002
■ ■ ■
Stainless steel blades Offset blades Edges with serrations for slip-proof working On carded hang pack
Cable cutters
■
D49
mm
"
160
6R
kg
qty.
0.12
10
VD0002
■ ■
For multicore cables with diameter up to 10 mm Stainless steel blades On carded hang pack
Combinox
■
D50
mm
190
"
7I
mm
40
"
1O
kg
0.14
qty.
10
VD0002
■ ■ ■ ■
Stainless steel blades Ergonomically designed handles with soft-insert With wire guide for cutting binding wire Circular cutting to stop for stripping cable On carded hang pack
143
Multitool and folding utility knives
An all-rounder with large snips Your benefits at a glance: 1 Multiple applications Equipped with shears, blade, saw, file, Phillips head screwdriver and large and small slotted screwdriver, the Multitool is an indispensible assistant. 2 Tools made from stainless steel Rustproof tools guarantee a long service life and are a sign of a quality product. 3 Slip-proof handle Red soft cushioned inserts, sits firmly in the hand. 4 Practical belt pouch Always to hand, the approx. 10 cm / 4 Inches folding tool is stored in the robust nylon pouch provided.
DMT Multitool Overall length open
DMT
■
■
■ ■ ■
mm
175
"
7
Overall length closed mm
100
"
4
mm
55
"
2E
1 Multitool with 7 options: Shears, blade, saw, file, Phillips head screwdriver and large and small slotted screwdriver Cuts: Leather, rope, vinyl, thin cable, cord, thin plastic, paper and much more besides With a robust belt pouch for secure, it provides handy storage Stainless steel handle with soft cushioned elements for slip-free work On carded hang pack
The Multitool will be delivered in an attractive sales presenter. Sale to dealers in packaging units only. 144
kg
0.48
qty.
8
VD0003
Folding utility knives
Knife-set DBK PH Layout qty.
DBKPH-SET
DBKPH Folding locking utility knife with convenient nylon storage case ■ + 10 pc. standard blade DBK-T ■ + 5 pc. hook blade DBK-H ■ + 2 pc. linoleum blade DBK-L ■ + 2 pc. scoring blade DBK-A
VD0003
8
■ ■ ■ ■
Knife with comfortable plastic handle Practical nylon zip-up case Four different blades for different tools On carded hang pack
The knife-set will be delivered in an attractive sales presenter. Sale to dealers in packaging units only. Folding utility knife ■
DBKPH-EU DBKWH-EU DBKAH-EU
mm
160 160 160
"
mm
6R 6R 6R
28 28 28
"
1W 1W 1W
kg
0.22 0.20 0.14
qty.
12 12 12
VD0003 ■ ■ ■ ■ ■
DBKPH-EU: Comfortable plastic handle; thumb cushion for max. contact pressure; blade compartment with 5 replacement blades included DBKWH-EU: High quality wooden handle DBKAH-EU: Light weight aluminium handle Quick blade exchange Belt clip On carded hang pack
All knives will be delivered in an attractive sales presenter. Sale to dealers in packaging units only.
Spare blades Content per unit
DBK-T DBK-H DBK-L DBK-A
mm
60 50 87 80
"
2Z 2 3I 3W
pcs.
10 10 5 5
■
qty.
10 1 1 1
VD0003
■
Suitable for all BESSEY bladed folding utility knives On carded hang pack
145
Jewellers' and thin sheet snips
High-precision edges
Best BESSEY quality with the highest precision BESSEY has over 80 years of experience in manufacturing metal cutting snips. We use this unmatched know-how in all our products.
146
This becomes self evident to all who use one of these fine jewellers' snips. Having the best quality tools pays off again and again wherever highest precision is required.
Jewellers’ and thin sheet snips – wide variety of styles for precision cutting of thin metals!
Jewellers' and thin sheet snips
Jewellers' snips ■
Description
D70-1 D71-1
Straight edges Curved edges
mm
180 175
"
7 7
mm
31 32
"
1R 1R
kg
0.13 0.13
qty.
12 12
VD0002
■
Closed handles Completely nickel coated
Jewellers' snips ■
Description
D72-1 D73-1
Straight edges Curved edges
mm
180 175
"
mm
"
mm
7 7
31 29
"
1R 1W
kg
qty.
VD0002
kg
qty.
VD0002
0.11 0.11
12 12
■
Open handles Completely nickel coated
Jewellers' snips Description
D74-1 D75-1
Straight edges Curved edges
mm
180 175
7 7
34 33
"
1Z 1T
0.09 0.09
12 12
■ ■
With handle loops Completely nickel coated
Jewellers' snips ■
Description
D76-1 D77-1
Straight edges Curved edges
mm
180 175
"
7 7
mm
26 20
"
1 S
kg
0.14 0.14
qty.
12 12
VD0002
■
Closed handle with spring Completely nickel coated
147
Household and multi-purpose shears
Multi-purpose shears
D820-200 D820-250
■ ■ ■
mm
200 250
"
mm
7D 10
80 105
"
mm
"
mm
"
3W 4R
kg
qty.
VD0002
kg
qty.
VD0002
kg
qty.
VD0002
0.07 0.10
12 12
Stainless steel blades Comfortable handles loops with soft cushion inserts On carded hang pack
Multi-purpose shears ■ ■ ■
Stainless steel blades Comfortable handles loops with soft cushion inserts On carded hang pack
D821-160 D821-180
mm
160 180
6R 7
70 80
"
2A 3W
0.04 0.07
12 12
Electricians' scissors
D53
■ ■
148
Nickel plated serrated blades With a wire cutter
mm
125
5
40
"
1O
0.07
12
Household and multi-purpose shears
Household and dressmakers' shears
D840-150 D840-180
mm
150 180
"
6 7
mm
30 77
"
1E 3
kg
qty.
VD0002
kg
qty.
VD0002
0.07 0.09
12 12
■
Completely nickel coated
■ ■
Completely nickel coated Oblong and round handle loops
■
Completely nickel coated
■
Robust design Black handle Oblong and round handle loops
Paperhangers' and paper shears
D851-250
mm
250
"
10
mm
105
"
4R
0.17
12
Paperhangers' and paper shears
D853-200
mm
200
"
8
mm
95
"
3A
kg
qty.
VD0002
kg
qty.
VD0002
0.08
12
Industrial and professional shears
D860-200 D860-225 D860-250
mm
200 225 250
"
8 9 10
mm
80 85 90
"
3W 3R 3I
0.24 0.27 0.28
6 6 6
■ ■
149
Tools for sheet metal work and plumbing
Special tools for specialists
Developed by professionals in the field of cutting technology Being specialists ourselves, we know what specialists appreciate: highest quality and maximum reliability. Tools for sheet metal work – and plumbing by BESSEY provide you
150
with both. These drop-forged, quality steel tools distinguish themselves due to their robustness and durability. Designed to the highest standards an to be the best! Designed to never let you down! Designed to be in your toolbox, because you want only the best!
Tools for sheet metal work and plumbing. Highest professional quality.
Tools for sheet metal work and plumbing
Seaming and clinching pliers
D33-60 D331-40 D331-60 D331-80 D34-60 D341-40 D341-60 D341-80 D35-60 D351-60
Form
Pivot screw version
Opening width
straight straight straight straight 45° bent 45° bent 45° bent 45° bent 90° bent 90° bent
passed through put on put on put on passed through put on put on put on passed through put on
mm
mm
60 40 60 80 60 40 60 80 60 60
270 270 270 320 270 270 270 320 270 270
"
10 A 10 A 10 A 12 A 10 A 10 A 10 A 12 A 10 A 10 A
kg
0.60 0.65 0.69 0.95 0.72 0.69 0.71 0.92 0.76 0.75
qty. VD0003
6 6 6 6 6 6 6 6 6 6
■ ■ ■ ■
Forged in quality steel Black powder coated Minimum jaw depth straight 60 mm Minimum jaw depth bent 50 mm
D 34... D 35...
D 33...
put on
Seaming and clinching pliers, PVC-coated handle Form
D33-60-P D331-60-P D34-60-P D341-60-P D341-80-P D35-60-P D351-60-P
straight straight 45° bent 45° bent 45° bent 90° bent 90° bent
Pivot screw version
Opening width
passed through put on passed through put on put on passed through put on
mm
60 60 60 60 80 60 60
■
mm
270 270 270 270 320 270 270
"
10 A 10 A 10 A 10 A 12 A 10 A 10 A
kg
0.60 0.68 0.72 0.72 0.92 0.76 0.75
qty. VD0003
6 6 6 5 6 5 6
■ ■ ■ ■
Forged in quality steel Black powder coated PVC-coated handle Minimum jaw depth straight 60 mm Minimum jaw depth bent 50 mm
put on
D 34...-P
passed through
passed through
D 35...-P
D 33...-P
Mini-folding pliers
D331-22 D341-22
Form
Pivot screw version
straight 45° bent
put on put on
Opening width mm
22 22
■
mm
180 180
"
7 7
kg
0.21 0.21
qty. VD0003
6 6
■ ■ ■ ■ ■
For small and precise seaming – and bending operations Forged from quality steel PVC-coated handles Completely hardened Jaw depth straight 30 mm Jaw depth bent 28 mm
151
Tools for sheet metal work and plumbing
Flat-nosed pliers for sheet metal work ■ ■ ■ ■ ■
Forged from quality steel PVC-coated handles Flat jawed pliers Jaw depth 50 mm Serration every 0.8 mm
Pivot screw version
D301
mm
put on
"
240
9I
kg
qty.
VD0003
kg
qty.
VD0003
0.40
6
Round nosed pliers Pivot screw version
D311
■ ■ ■ ■ ■
mm
put on
"
260
10 R
0.38
6
Forged from quality steel PVC-coated handles Round jawed pliers Jaw depth 50 mm Serration every 0.8 mm
Folding pliers ■ ■ ■
Forged from quality steel Bronzed PVC-coated handles
D355
Form
Pivot screw version
straight
put on
Opening width mm
30
mm
250
"
10
kg
0.45
qty. VD0003
5
Corner seaming and clinching pliers ■ ■ ■ ■
152
Forged from quality steel Bronzed PVC-coated handles Jaw depth 65 mm
D335
Form
Pivot screw version
straight
put on
Opening width mm
60
mm
280
"
11
kg
0.74
qty.
5
VD0003
Tools for sheet metal work and plumbing
Squeeze folding pliers Form
D336
straight
Pivot screw version
Opening width
passed through
mm
80
■
mm
"
kg
320 12 A 0.78
qty.
5
VD0003
■ ■ ■
Forged in quality steel Burnished PVC-coated handles Jaw depth 80 mm
Crimper
D36
mm
250
"
10
kg
0.47
qty.
1
VD0003
■ ■ ■ ■ ■
3 bottom- and 2 top jaws enable quick and efficient work Self-opening Completely galvanised PVC-coated handles Jaw depth 28 mm
Gutter support bowing pliers
D396
mm
680
"
20
kg
3.15
qty.
1
VD0003
■ ■ ■
10 mm recess width for gutter irons up to 40 x 6 mm Head made of rust-proof malleable cast iron Gliding role for protecting the plastic-coated gutter irons
153
Alphabetic register
Numerics 2K handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 A Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 47, 81, 109, 110, 111, 112 All-steel screw clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 33 Aluminium mini clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 American pattern snips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Angle clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Angle door frame straightening clamp . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Area pressure clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Aviation snips D16/D16L/D16S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 B Band clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 BAS-C compact clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 BAS-CB compact clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Base unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Berlin pattern snips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 C Cable cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142, 143 Cast iron screw clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 C-clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 C-frame edge clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 C-grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Clamp trolley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114, 115 Clamping force indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Claw clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Claw machine clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Clippix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Combinox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Cutting ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 D Deep throat clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Demonstration trolley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Door casing assembly brace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Door frame clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Door frame straightening clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 DuoKlamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 DuoKlamp Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60, 112 E Earth (ground) clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108, 109 Edge clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Edge clamp Kantenfix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Electricians' scissors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 English pattern snips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112, 113
154
F Fitters' clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Flat-nosed pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Flooring and clamping system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Flooring clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Folding utility knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Frame clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Framing set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 113 G Grip plier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Gutter support bowing pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 H High-performance clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 41, 42 Horizontal toggle clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93, 94, 95 Household and dressmakers' shears . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 I Ideal snips, manoeuvrable D08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Industrial and professional shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 J Jewellers' snips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 K K Body Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 113 K Body REVO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56, 113 Kantenfix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 KliKlamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 KombiKlamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 L Lever clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Light duty bar clamp U-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 M Machine table clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100, 102, 103 Malleable cast iron screw clamp . . . . . . . . . . . . . 17, 18, 19, 20, 21, 22, 23 Metal angle clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Mini folding pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151, 152, 153 Mitre clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Mitre clamping system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Multi angle pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Multi-function tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 Multi-purpose cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142, 143 Multi-purpose shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 MULTISNIP Longstyle D22A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 MULTISNIP Master D51A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Multitool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 N Nibbler with cutting-off function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
O Omega screw clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 One-handed clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59, 61 One-handed edge clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 P Paperhangers' and paper shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Parallel grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Parallel screw clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Pelican snips D218/D118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Pelican snips HSS D418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Pipe clamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Pipe clamping set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Pipe grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Pipe-pulling pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Plate girder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 POS Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Pressure cap strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Pressure piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Pressure plates for high-performance clamps . . . . . . . . . . . . . . . . . 42, 111 Protection cap set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Pump clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Punch snips D207/D107 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Punch snips HSS D407 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Punch snips with curved blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Push/pull clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96, 97 Q Quick clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93, 94, 95, 96, 97
T Table clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 112 Table vice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Tilting K Body clamp adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 113 Toggle clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93, 94, 95, 96, 97 Tommy bar accessory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Tools for sheet metal work and plumbing . . . . . . . . . . . . . . . 151, 152, 153 U U-clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 UniKlamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Universal snips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Universal snips with wide blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 U-shaped all-steel screw clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 U-shaped high-performance clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 U-shaped lever clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 V Variable screw clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50, 51 Vario corners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 VarioClippix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Variogrip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 W Welding clamp set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Window installation clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Wood handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Wood Klemmy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Wrench with T-bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
R Rafter clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Replaceable pressure plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Round nosed pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 S Safety strap cutter with compound leverage . . . . . . . . . . . . . . . . . . . . . 139 Sash clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Seaming tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 87 Selling aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114, 115 Shape and straight cutting snips D15A . . . . . . . . . . . . . . . . . . . . . . . . . 127 Shape and straight cutting snips D216/D116 . . . . . . . . . . . . . . . . . . . . 133 Shape and straight cutting snips D27A . . . . . . . . . . . . . . . . . . . . . . . . . 123 Shape and straight cutting snips D29ASS-2 . . . . . . . . . . . . . . . . . . . . . 122 Shape and straight cutting snips HSS D27AH . . . . . . . . . . . . . . . . . . . . 130 Shape and straight cutting snips HSS D416 . . . . . . . . . . . . . . . . . . . . . 131 Shape and straight cutting snips TiN D27AH-TiN . . . . . . . . . . . . . . . . . 129 Shape cutting punch snips D214/ D114 . . . . . . . . . . . . . . . . . . . . . . . . 134 Shape cutting snips D27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Shape cutting snips D29SS-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Spare blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Spindle set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Spring clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 71 Steel strap cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Straight cutting snips D27B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Straight cutting snips D29BSS-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
155
BESSEY Clamping- and Cutting Technology
Complete catalogue 2013/2014 BESSEY Complete catalogue 2013/2014
Simply better.
Simply better.
cts u d o r p New 2013
Variable high-performance clamps – Complete sets SLV and GSV Page 48 - 51
All-steel screw clamp classiX GS Page 33
http: ⁄ ⁄ www.youtube.com/user/besseytoolsdeutsch http: ⁄ ⁄ newsletter.bessey.de E-Newsletter
www.bessey.de BESSEY Tool GmbH & Co. KG P.O. Box 11 54 74301 Bietigheim-Bissingen, Germany Fon +49 7142 401-0 Fax +49 7142 401-452 E-Mail: info@bessey.de
30 07394 „h1“ [EN_oPr]
https: ⁄ ⁄ www.facebook.com/BESSEY.Tool.Einfach.Besser
WA 01/2013
http: ⁄ ⁄ www.bessey.de
E-Newsletter
Fitters‘ clamp classiX GSL High-performance clamp classiX GSM Page 42