DATA SHEET Picotig 220 puls DC 5P 090-002068-00502
Version
TIG DC inverter welding machine, portable, gas-cooled, 5-pole, with PFC module High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology TIG DC and TIG pulse Non-latched/latched operation spotmatic and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Robust housing with impact-resistant plastic cover 5-pole, digital welding torch connection with X technology allows users to connect Retox XQ welding torches Comfort 3.0 mini control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach Cable holder for holding mains cable as standard Protective cap provided as standard protects the control against water, dirt and impact Adjustable hot start current and hot start time Adjustable Arcforce Antistick function Energy-saving thanks to high efficiency and standby function 3.5 m mains supply lead with 16 A shock-proof plug Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage Picotig 220 puls DC 5P
Setting range for welding current
5 A - 220 A
Duty cycle 40 °C
220 A / 40 % 190 A / 60 % 160 A / 100 %
Open circuit voltage
97 V
Mains voltage
1 x 230 V
Tolerances
-40 % up to +15 %
Mains frequency
50 Hz / 60 Hz
Recommended generator power
6.6 kVA
Power consumption Pi
22 W
Protection classification
IP23
Test mark Dimensions (L x B x H)
454 mm x 165 mm x 321 mm 17.9 inch x 6.5 inch x 12.6 inch
Weight
10 kg / 22.1 lbs
Standards
IEC 60974-1, -3 and -10 CL.A
EWM GmbH / Dr. Günter-Henle-Straße 8 / 56271 Mündersbach / Deutschland / Tel: +49 26 80 181-0 / Fax: -244 / www.ewm-group.com / info@ewm-group.com © 2023 / subject to technical changes / Status: 2023-11-27 / Page 1 of 1