PLASTIC TO PROFIT: PURIFICATION AND SEPARATION OF CRUDE PYROLOSIS OIL AARON LAW| ISAAC BLAKE | JUHYUNG LEE |RAHUL BHUSAL
System BFD:
Safety: Pygas
Crude pyoil Water
Desalted Electrostatic crude Distillation desalting system system
Naphtha Gas oil
Dechlorination system
Pressure safety valves sized for the main distillation system. Naphtha
HAZOP analysis highlights key safety challenges in distillation.
Gas oil
Meets BACT standards of 98% recovery.
Final Products:
Nitrogen and chloroalkanes
Objective: Separate crude pyrolysis oil into four sellable fractions, producing energy and circularizing the plastic waste lifecycle. Brine
Background: Large quantities of plastic waste are generated daily and handled inappropriately, and this facility is designed to accommodate the wasted generated in a regency of Bali. Pyrolysis converts flexile plastic waste into a crude pyoil, but the crude must be cleaned and separated for environmentally responsible use. This closes the loop for plastic circularity as pyoil can be used to synthesize new plastics or generate energy.
Nitrogen
Atmospheric residue
Flare and waste treatment system
Pygas: 11 tons/day; $1,555,649 per year. Waste
Process Description: Electrostatic desalting extracts salt contaminants from crude pyoil. Distillation separates the crude into four different streams or ‘cuts’: pygas, naphtha, gas oil, and atmospheric residue. Adsorbent beds remove remaining chlorides from two of the four cuts to meet product specifications.
Naphtha: 864 Barrels/day; $24,616,685 per year. Gas Oil: 2,605 Barrels/day; $93,617,000 per year. Atmospheric Residue: 712 Barrels/day. Pygas to be converted to ethylene; Naphtha and gas oil to be reformed to produce various final products in the fuel industry; Atmospheric residue proposed use as carbon black for electronics industry. Product Boiling Curves:
Chloroalkanes from the absorber go to waste storage and the flare was sized to handle upset conditions. Simplified Process Diagram of Distillation System:
Economics: Economic values were calculated on a basis of a 10year operating period, using a 5-year MACRS depreciation. Conclusion: Plastic waste poses a significant environmental challenge. Pyrolysis units represent a profitable way to convert plastic waste into useful products. Main Column Behavior: High temperatures and heating at the bottom of the column necessitate a fired heater for the feed and reboiler. The addition of a side stripper and condenser allow product specifications to be met for all streams.
2023 Capstone Project