Covered conductor systems that reduce fire risk and keep networks running
Confidence built in Amokabel, the complete system
Get total peace of mind with Amokabel’s NGCC — a fully engineered system where the cable and accessories are purpose‑designed and tested to work together. Every fitting is proven compatible with the CCSX covered conductor, delivering a complete, reliable solution you can trust. One cable. One tested system. Zero guesswork.
Teros™ – Switch, Sectionaliser & Recloser in One Unit
SOLID DIELECTRIC
Three Functions. Two Voltages. One Unit.
What makes G&W Teros™ powerful is that the same physical unit can be configured, commissioned and reconfigured to perform as any one of three roles – a switch, a sectionaliser or a recloser – without any changes to hardware.
This ability to change helps reduce capital costs, planning complexity, installation time, and inventory overheads. This unit can be reconfigured again and again to cater for changes in network requirements over time. Designed for use on both 11kV and 22kV networks, Teros™ is the versatile choice.
Teros™ has six voltage sensing bushings as standard, providing Low Energy Analogue inputs to the control. It's maintenance free solid dielectric design eliminates routine maintenance tasks common with older technologies, reduces environmental risk and improves personnel safety while maintaining high fault interruption performance. All serviceable parts and CT ratio selection are located in the Control Enclosure.
The superior choice for environmentally responsible networks, no SF6 gas to consider
FULL INTEGRATION
SCADA, OMS or DMS via the SEL 651RA or INGETEAM relay offers enhanced network reliability. Higher creepage modules and a sealed mechanism reduce potential for failure & maintenance
SEAMLESS DESIGN
Grey insulators and ganged design make Teros™ blend seamlessly into the environment
SEL-651RA relay
EARTH RODS
COPPER BONDED EARTH RODS
Longer life through molecular bonding
Copper bonded NOT plated! — The same principle as chrome motorbike components.
Copper bonded earth rods provide reliable grounding and long term corrosion resistance for electrical installations. ERICO rods combine a high strength steel core with a molecularly bonded copper coating for durable performance in demanding environments.
Why Grounding Matters
Grounding systems help to:
Protect people from electrical faults
Provide a reference point for equipment
Prevent flashover on transmission systems
Protect transformers, capacitors and lightning arresters
Why Copper-Bonded Rods?
Underground electrodes face harsh corrosion conditions. Copper bonded rods provide the ideal combination of:
Corrosion resistance
High conductivity
Strength for deep driving
ERICO Copper-Bonded Technology
ERICO rods use a continuous electro plating process that creates a permanent molecular bond between copper and steel. This ensures the coating:
Will not slip or tear during installation
Will not crack when bent
Delivers decades of reliable performance
Copper-bonded ERICO rod won’t crack when bent
99.9% PURE COPPER COATING
High conductivity, corrosion resistance.
MOLECULAR COPPER BOND
Permanent copper–steel bond.
EARTH ROD DRIVING
Drive Earth Rods in Seconds — Not Minutes
Meet the power tool ready Earth Rod Driving Tool that turns tough manual work into a fast, controlled job.
Power tool adaptor for driving earth rods
Reduces labour time and improves efficiency
Ideal for earthing pin installation
Durable, high quality construction
Simple to install and use
Available in three sizes
HIGH-STRENGTH STEEL CORE
Superior strength and durability.
254 MICRON COPPER COATING Meets UL® 467 requirements.
ROLL-STAMPED IDENTIFICATION
Easy inspection and traceability.
DIMENSIONS
COPPER THICKNESS
STRENGTH TEST
COPPER
BEND TEST
ISO-CONTROLLED MANUFACTURING
Consistent, reliable quality.
Trusted, Proven Protection for LV Networks
Michaud Fuse Switch Disconnectors
Test reports available on request
Michaud’s range of Fuse Switch Disconnectors (FSDs) delivers reliable, installer‑friendly protection for LV overhead networks and customer connections. With robust construction, insulation‑piercing technology, and field‑proven performance, these units continue to set the benchmark for safe, efficient, and durable network protection. With more than 25yrs in the New Zealand market, Michaud FSDs continue to deliver reliable connections with minimal effort and no special tooling.
Terminals are fully insulated, waterproof and bi metallic.
IPC connection with shear head bolts ensures correct torque & good connection
Range taking capability reduces inventory
Continuous one piece electrical connection from cable to fuse
Test points are accessible without removing the fuse carrier
Single and gang fuse brackets in straight and twisted orientation available
UV Stabilised black body
Double circlip for retention of fuse
Fuse base will stay in place even without fuselink
Watertight cable entry points
Up to 100amp (K491 & K291) and 160amp (K292)
LV Din Earth Set For Fuse Outlet
CAT No. 1115281041T
This bonding set is designed for bonding of LV DIN switches and is suitable for indoor and outdoor use. The set consists of short circuiting cartridges, short circuiting Cu cables in transparent insulation, tail clamp and insulating pole enabling you to safely attach the set. The insulating pole made of glass fibre laminate which giving high electrical and mechanical resistance and stability. Produced according to standards CSN EN 61230, IEC 1230, PNE 35 9705, DIN 46 235. Complies with EEA Guide for Portable Equipment for Work on or Near Conductors, Section 7.
FEATURES
• Each set comes tested, tagged, and ready to go into service
• Delivered in a sturdy plastic storage box
• Instructions for use and test certificate included
• 24 month warranty for manufacturing defects
TECHNICAL DATA
Climatic group
Normal from 25 to +55°C
Rated short time withstanding current 6kA/1s
Length of pole
Length of handle
Equipment versions
Pole material
Cross section of cable
Length of cable
Weight of equipment
350 mm
160 mm
801.001 P (with insulating pole)
801.001 H (with fuse handle)
Glass fibre laminate
25 mm² short circuiting
25 mm² bonding
500 mm short circuiting
1500 mm bonding
4.5kg
PRODUCT TRAINING FOR ALL TRANSNET PRODUCTS
Expertise Built In!
At TransNet, expertise isn’t an add on, it’s built into every product we deliver.
As New Zealand’s leading supplier, we combine deep technical expertise, unmatched product knowledge, and globally recognised products to deliver the most complete solutions in the industry.
We’re proudly NZ owned and operated with global support from our supply partners, enabling us to provide:
Specialist Cable Accessory, TUDS, Cadweld and AMPACT training,
On‑site technical support for all our products
Custom‑designed cable accessory kits that meet all relevant international requirements
Fault breakdown and reporting service
Extensive stock holdings
Complete solutions from components to installation
Experienced product specialists in all product ranges
With our trainers, each bringing over 40 years of hands‑on industry experience to the table — TransNet delivers more than just products.
We deliver absolute confidence!
Add to that the backing of our local and global network of product specialists, materials engineers, and manufacturing/logistics teams, and you get the reassurance that TransNet products remain the benchmark for performance and reliability worldwide.
Whatever the voltage.
Whatever the application. Whatever the environment.
TransNet has the expertise, products, and proven capability to provide a full end‑to‑end solution — from training to installation — built to last in New Zealand’s toughest
On Site Training
Lightweight 40 Cal Protection Without Compromise
Our 40cal Enespro Arc Flash Suit just levelled up. Now available in high‑visibility safety orange, it delivers the same trusted performance and testing you rely on—plus an added safety boost with its standout colour and reflective striping for low‑light and night‑time work.
Better Than Standard 40 Cal Suits
Dramatically Lighter, Thinner & More Flexible Engineered with GORE® PYRAD® fabric, making them Up to 20% lighter, 48% thinner and 56% more flexible than other premium 40 cal arc flash suits.
Single‑Layer 40 Cal CAT 4 Protection from a single layer system reducing weight, bulk, rigidity & heat retention
Superior Visibility & Safety Features 3M™ Scotchlite™ FR reflective trim enhances visibility in low‑light and high‑risk environments and the Orange colour offers even more visual contrast, helping spot workers more easily.
Best‑in‑Class Faceshield Technology The PureView™ faceshield provides wider field of vision, better clarity, reduced fogging and the lift‑front function allows quick access to fresh air outside the hazard zone.
Optional Dual Cooling Fans Integrated dual‑fan hood cooling, delivers fresh airflow inside the hood, reduced fogging and significantly improved comfort in hot or high‑PPE environments.
Highly Ergonomic Construction Stretch back panels, elastic waists, pleated elbows & knees, 26" leg zippers for fast donning/doffing and better mobility.
GORE® PYRAD® fabric
Quality-Proven Helical Fittings
You Can Rely On... Ready to Ship
Helical Line Fittings deliver a connection you can trust. Engineered for demanding network conditions and manufactured to uncompromising standards, our fittings provide exceptional mechanical and electrical performance across a wide variety of applications.
Our helical fittings undergo rigorous quality testing to ensure consistent performance in high‑voltage environments. Designed to withstand harsh weather, vibration, and mechanical stress, they provide secure, reliable connection year after year. With a proven track record across New Zealand utilities, contractors, and infrastructure providers, TransNet Helical fittings deliver confidence every time.
From conductor and pole line accessories to dead ends, ties, and vibration solutions, our range covers virtually every scenario. Whether you’re working on upgrades, maintenance, or new network construction, we have a solution.
We understand that network work can’t wait. That’s why we maintain one of the largest stocks of helical fittings in the market, ready for immediate dispatch. With fast turnaround, reliable availability, and strong inventory planning, you can keep your projects moving without delays.
Huge range for all applications and conductors
Extensive stock holding for fast delivery
Robust and informative water resistant labels with aggressive adhesive to hold it in place until you’re ready for it to be removed
Labels clearly show descriptive part number, colour code, barcode and conductor names/ sizes to ensure correct selection
No special tools required, fast and easy to install
Designed to fit metric dimension conductors listed in AS1222.1, AS1222.2, AS1531, AS1746 and AS3607
Designed and selected to perform in our unique environment
Auckland 78 Cryers Road
East Tamaki Auckland
NEW ZEALAND
Ph 0800 442 182
PO Box 39 383
Howick, Auckland Wellington 10 Petone Ave Petone Wellington
NEW ZEALAND
Ph 04 576 2530
PO Box 39 383
Howick, Auckland
NEW ZEALAND sales@transnet.co.nz
TransNet Tonga
Nuku'alofa
Lakalakaimonu Multi Utility Complex Taufa'ahau Road
Poutaha
Nuku'alofa
TONGA
Ph +67 627 939 PO Box 2932
Nuku'alofa
TONGA
transnet@kalianet.to
All Blundstone and John Bull Boots Tested to
Free Electrical Testing^
TransNet are your trusted local agents for Blundstone and John Bull safety boots and gumboots—durable, comfortable, and protective footwear, available in both untested and ASTM F2413 18 Clause 5.6 Electrical Shock Hazard rated options.
*ASTM F2413 18, Clause 5.6 Electrical Shock Hazard Resistance Tested ^Free testing applies to all new boots ordered from TransNet when they are dispatched, subsequent and periodic testing is available for an additional fee.
Welcome Annie Platt
Introducing Annie Platt, our newest Safety Product Specialist to join the team. Annie brings an energetic, people first vibe to her role as Safety Products Specialist at TransNet. With a background in hands on sales leadership at Mountain Warehouse, she’s no stranger to helping customers find exactly what they need—and making the process feel easy, supportive, and well informed. Contact Annie for any Safety Product enquiries aplatt@transnet.co.nz.