LamaCaster H65
Titus Technologies Advanced Multi-Slide Die Casting Technology
LamaCaster H65 Hydraulic Multi-Slide Die Casting Machine Description
The LamaCaster H65 machine is a powerful and precise hydraulic multi-slide die casting machine with an 8-tonne clamping force running 65mm x 65mm tooling. The machine is ideal for making
small parts with demanding quality requirements, thin wall sections, high integrity and plating quality finishes.
Features
· reliable and robust multi-slide die casting machine · high productivity rates - fast cycling with quick tool changes · compact machine footprint · split-line injection optimises material usage
· touchscreen controller with process visualisation · six programmable hydraulic functions/four pneumatic · integrated ingot feeding
Technical Specification
Item locking force
8 tonnes
tool size
65mm x 65mm 100mm x 65mm
shot weight
up to 90g
dry cycle speed
60 cycles/min
The H65 machine runs with 65mm x 65mm tools as standard or can be configured for 100mm x 65mm tooling. The H65 is very flexible and can either produce larger components from single cavity tools or small components on multi-cavity tools. This machine produces castings with minimal porosity and excellent surface finish. The H65 machine is very versatile and has the capability of running complex tool sequences as it has six programmable hydraulic functions and four programmable auxiliary pneumatic functions enabling the production of very complex geometry components. The H65 controller has been designed for ease of use with the
functionality to control the whole of the casting process and give maximum operator feedback to ensure optimum levels of productivity and quality can be achieved.
LamaCaster H65 Metric Item
Standard
US Option
Standard
Option
Slider Movement/ Tool No. of slides
4
Max. stroke (theoretical)
50mm
Nominal die size
65mm x 65mm
Locking force
8t
No. of cavities in tool
na
6
4
6
1,98” 100mm x 65mm
2.56” x 2.56”
3.94” x 2.56”
8.8t na
na
na
Melt Pot Heater power
20kW
20kW
Melt rate
105kg/h
231lbs/h
Melt pot capacity
160kg
353lbs
Supply of treated water
3 bar
43.5 psi
Reccomended water temperature
13 to 18°C
55 to 65F
Line pressure (max.)
6 bar
87 psi
Air consumption (max.)
25m³/h
14.7cfm
Capacity of air reservoirs
na
na
Dry cycle speed (cycles/min.)
60
60
Cooling
Pneumatics
Hydraulics Line pressure (max.)
110 bar
130 bar
1595 psi
Hydraulic tank capacity
150l
39.6 gallons
Motor power
11kW
14.75hp
1885 psi
Injection Injection piston diameter
25.4mm
40mm
1”
1.57”
Injection cylinder diameter
63mm
2.48”
Max. injection cylinder stroke
45mm
1.77”
Max. shot weight (theoretical)
150g
370g
5.3oz
13oz
Max. recommended shot weight
90g
220g
3.2oz
7.8oz
Max. recommended metal pressure
350 bar
290 bar
5076 psi
4206 psi
Nozzle Heater power
1100W
1100W
Voltage
3 x 400V 50Hz
3 x 400V 50Hz
Nominal power
35kW
35kW
Nominal current
50A
50A
Pre-fuse max.
63A
63A
Connection type
TN-S, 3+N+PE
TN-S, 3+N+PE
Power Supply
na* = not applicable
LamaCaster H65 Hydraulic Multi-Slide Die Casting Machine Footprint
The H65 machine is a compact machine with a small footprint. Attention should be given to any other equipment, walls or other objects that are situated close to where the machine is to be positioned. To the rear of the machine there should be a minimum clearance of one metre to allow for access to the melt pot, injection unit etc. and space should be allowed for any lifting equipment and personnel that are required to carry out normal machine operation and maintenance tasks on and around the machine. Service requirements Water 3-5 bar @ 13-18°C Air 25m³/h @ 6-8 bar max. Power supply 35kW