LamaCaster H100
Titus Technologies Advanced Multi-Slide Die Casting Technology
LamaCaster H100 Hydraulic Multi-Slide Die Casting Machine Description
The LamaCaster H100 is our most powerful LamaCaster machine with a 20-tonne clamping force and capable of producing parts up to 220g. A fast powerful injection unit
gives the machine the capability to produce parts with thin walls, complex geometries and excellent surface finish properties.
Features
· excellent design and build quality · powerful, precise and fast cycling · quick tool changes
· high quality parts with complex geometries · split-line injection optimises material usage · touchscreen controller with process visualisation
Technical Specification
Item locking force
20 tonnes
tool size
100mm x 100mm
shot weight
up to 220g
dry cycle speed
45 cycles/min
The H100 runs 100mm x 100mm tooling with a shot weight of up to 220g. It is ideal for producing larger parts suited to four-slide production that need high integrity, precision and good surface finish. The H100 machines can be equipped with spare functions to run up to six slides. The controller has been designed for ease of use and with all the required functionality to accurately control the casting process.
LamaCaster H100 Metric Item
Standard
US Option
Standard
Option
Slider Movement/ Tool No. of slides
4
6
Max. stroke (theoretical)
50mm
1,98”
Nominal die size
100mm x 100mm
3.94” x 3.94”
Locking force
20t
22t
No. of cavities in tool
na
na
4
na
6
na
Melt Pot Heater power
20kW
20kW
Melt rate
105kg/h
231lbs/h
Melt pot capacity
160kg
353lbs
Supply of treated water
3 bar
43.5 psi
Reccomended water temperature
13 to 18°C
55 to 65F
Line pressure (max.)
6 bar
87 psi
Air consumption (max.)
25m³/h
14.7cfm
Capacity of air reservoirs
na
na
Dry cycle speed (cycles/min.)
45
45
Cooling
Pneumatics
Hydraulics Line pressure (max.)
130 bar
110 bar
1885 psi
Hydraulic tank capacity
150l
39.6 gallons
Motor power
11kW
14.75hp
1595 psi
Injection Injection piston diameter
40mm
25.4mm
1.57”
1”
Injection cylinder diameter
63mm
2.48”
Max. injection cylinder stroke
45mm
1.77”
Max. shot weight (theoretical)
370g
150g
13oz
5.3oz
Max. recommended shot weight
220g
90g
7.8oz
3.2oz
Max. recommended metal pressure
290 bar
350 bar
4206 psi
5076 psi
Nozzle Heater power
1100W
1100W
Voltage
3 x 400V 50Hz
3 x 400V 50Hz
Nominal power
35kW
35kW
Nominal current
50A
50A
Pre-fuse max.
63A
63A
Connection type
TN-S, 3+N+PE
TN-S, 3+N+PE
Power Supply
na* = not applicable
LamaCaster H100 Hydraulic Multi-Slide Die Casting Machine Footprint
The H100 machine is a compact machine with a small footprint. To the rear of the machine there should be a minimum clearance of one metre to allow for access to the melt pot, injection unit. Space should allow for any lifting equipment and personnel access needed to carry out machine operation and maintenance tasks on and around the machine. Service requirements Water 3-5 bar @ 13-18°C Air 25m³/h @ 6-8 bar max. Power supply 35kW