Freestanding Creep Panel
• 12’ & 24’ panels available
• Vertical tubes can be 16” or 21.75” apart
• Adjustable bar comes with every panel
• Optional 12’ drop gate
• Optional 68” wide internal gates available
Freestanding Panel
• 5’9” tall and stand 10” off the ground
• Average weight: 24’ 820 lbs / 30’ 960 lbs
• 2-7/8” wellpipe frame and 5’ arched legs
• Optional 68” wide internal gates available
• 360° hinge & swinging gates available
Continuous Fence Panel
• 20’ panels are built w/ 1.25”-14ga tubing
• Qty 5 - 5/8” solid rod for uprights
• All steel is made in the USA
• Custom panels available upon request
• Clamps & splicers included
• Several panel options available
Portable Windbreak
• 24’ long and 8’6” tall
• Average weight: 940 lbs
• New 3” x 2” rect tube frame construction
• Set these up by yourself in less than 2 minutes
• Legs are 12’6” long and bent at both ends
Swinging Gates
• 57.50” tall x 6’-16’ lengths
• Top tube & uprights are 1.90” OD tubing
• 6 bottom 1.50” tubes go through the uprights & ends
• Tubes are open at the end or bottom for water drainage
• Hinges are plated to prevent rusting
Portable Windbreak/Shade
• 24’ long x 6’9” off the ground in the shade position
• Average weight: 1020 lbs
• New 3” x 2” rect tube frame construction
• Legs are 13’ long and weighs over 100 lbs
• Creates 8’ x 24’ shaded area
• Legs are 13’ long and bent at both ends
Bottomless Bunks
• 10’, 20’, & 30’ lengths available
• 2-7/8” Wellpipe & 2” Sq tubing frame
• 10ga Sheeting sits on center of pipe
• Single rail=48”Wide x 22”Deep x 33”Tall
• Double rail=48”Wide x 20”Deep x 34”Tall
Engineered products for today’s cattlemen
Fenceline Bunks
• 10’, 20’, & 30’ lengths available
• 2-7/8” Wellpipe & 2” Sq tubing frame
• 10ga Sheeting
• Standard or pin style adjustable rail
• Bottomless or with a bottom
Hanging Bale Feeders
• 74” tall x 87” wide & weighs 700 lbs.
• Made of 12ga Hot dipped galvanized steel
• Frame comes with 2.5 yr limited warranty
• Standard & Heavy-Duty hay nets available
• Optional fork pockets & lifting bar available
Haysaver Feeders
• 8’ diameter & weighs 1400 - 2000 lbs.
• Made of 13ga & 14ga 2” galvanized tube
• Best HaySaver will cut waste by 30%-50%
• Available for sheep/goats, yearlings, cows, bulls/buffalo, & horses
• Equine feeder is tall enough so horses won’t rub their manes
