Plastics & Rubber
International Magazine for the global Plastics & Rubber Industry TecnA Plastics & Rubber - October 2020 - ISSN 2723-9187
www.tecnaplastics.com
contents
Plastics & Rubber
10 New project acquisition for AMUT Group recycling technology in the Far East
16
Tailor-made solutions featuring high-tech automation
20
Almost 50 years in extrusion blow moulding
34 24
Next Fakuma in October 2021!
The organization process restarts
44 Innovation, sustainability, and productivity in the future of thermoplastics waste
48
Premium technologies for top performances
58 BFM, parameter for quality
TecnA Plastics & Rubber October 2020 Issue 3 - Year II
Plastics & Rubber
Publisher Fabiana Da Cortà Fumei Editorial Staff Sabrina Fattoretto Design Claudia Bosco Elena Abbondanza Collaborators Anita Pozzi Franco Giordano International Magazine for the global Plastics & Rubber Industry
Printing L’Artegrafica Srl
Direzione e Redazione Editrice EDF Trend srl Corso del Popolo, 42 31100 Treviso – Italy Tel. +39 0422 549305 Fax +39 0422 591736 redazione@tecnaplastics.com www.tecnaplastics.com N° iscrizione ROC (Registro degli Operatori di Comunicazione): 22054 ISSN 2723-9187 In questo numero la pubblicità non supera il 45% Poste Italiane SpA - Spedizione in Abbonamento Postale - D.L. 353/2003 (conv. in L. 27/02/2004 n. 46) art. 1 comma 1 NE/TV
Publisher Editrice EDF Trend srl Corso del Popolo, 42 31100 Treviso – Italy All right reserved. Reproduction in whole or in part without written permission is prohibited. The Publisher is not responsible for any materials, nor for writers’ nor contributors’ expressed or implied opinions.
Responsabile del trattamento dati è il direttore responsabile a cui ci si può rivolgere presso la sede di Treviso - Corso del Popolo, 42 per i diritti previsti dalla legge 675/1996.
Member of
I formativa ex D.lgs 196/03 Ai sensi dell’art.2 comma 2° del Codice Deontologico dei giornalisti si rende nota l’esistenza di una banca dati di uso redazionale presso la sede di Corso del Popolo, 42 - Treviso.
TecnA Plastics & Rubber - October 2020 - ISSN 2723-9187
TecnA Plastics & Rubber is a magazine by
EDITRICE INTERNATIONAL MAGAZINES
Plastics & Rubber - year XXV
ET
FOOD &
ANIMAL FEED TECHNOLOGY
to Postale D.L. 353/2003 (conv. in L. 27/02/2004 n. 46) art. 1 comma 1 NE/TV - Anno 24 N° 4/2019 - ISSN 2498-9541
EDF TREND SRL
INTERNATIONAL MAGAZINES TECNOLOGIE PER L’INDUSTRIA DEGLI ALIMENTI E MANGIMI PER ANIMALI
.it
EXHIBITIONS
CHINAPLAS moves to Shenzhen for April 2021 debut Embrace new economic development, seize opportunities in Greater Bay Area
T
he 34th edition of CHINAPLAS has been rescheduled to April 13-16, 2021, at a new venue -- Shenzhen World Exhibition & Convention Center. This will be the first time for CHINAPLAS to be held in Shenzhen. The trade fair will alternate between Shenzhen (odd years) and Shanghai (even years) in the future, continuing to empower upstream and downstream plastics and rubber companies to uncover greater opportunities in the new phase of China’s economic development. Adsale Exhibition Services Ltd., organizer of CHINAPLAS 2021, held a press conference, leveraging online video conferencing tools for the first time to virtually communicate and interact with more than 100 Chinese and international media. During the press conference, Mr. Stanley Chu, Chairman of Adsale, Ms. Ada Leung, General Manager of Adsale, and Ms. Norris Chu, Project Director of Adsale, announced the latest updates about the trade show, shared word of emerging developments from a new starting point, and discussed postpandemic opportunities in the plastics and rubber industries. Focus on Greater Bay Area’s geographic advantages “Shenzhen combines China’s enormous market potential and its unique geographic advantages, and the upcoming CHINAPLAS will help to position the plastics and rubber industries to seize new growth opportunities,” Ada Leung said.
6
Plastics
The fairground is situated at the heart of the Greater Bay Area
Unparalleled advantages of domestic market - Impacted by COVID-19 pandemic, the global economy is in a deep recession. Facing downward pressure from foreign trade, China’s State Council is redirecting the economic focus from export to a domestic-demand-driven model as the new normal. China’s 1.4-plusbillion population and 400-plus-million middle-income consumers represent the largest such grouping in the world, with consumption potential unmatched by any other economy. The expansion of China’s middle class has created tremendous potential for consumption upgrading. In
& Rubber
recent years, some labor-intensive and low-end manufacturing work has shifted to other countries. The impact of COVID-19 is reshuffling the global economy and triggering major changes in manufacturing supply chains. China is repositioning itself in the global value chain and climbing toward the higher-end with high-tech products increasingly flowing from China to overseas markets, including such items as communications equipment, highspeed rail systems, and drones. Driven by research and innovation, industries continue to reform and upgrade, in turn increasing the demand for
..............................................................OCTOBER 2020
Adsale Exhibition Services press office
EXHIBITIONS
CHINAPLAS online press conference
innovation and smart manufacturing in the plastics and rubber industries. In addition, China is actively responding to plastics pollution, accelerating green and sustainable development, and creating market demand for much-needed recycling and green technologies. Greater Bay Area, major upside for the industries - The Guangdong-Hong Kong-Macau Greater Bay Area is the largest bay area in the world, accounting for 0.6% of China’s land area, 5% of its population, and 12% of the national Gross Domestic Product. Its GDP is expected to reach 28.9 trillion RMB (about US$4.09 trillion) by 2030, ranking among the top 10 economies in the world. The “9+2” cities”1 are accelerating their coordinated development, building a vibrant world-class city cluster, and stimulating new economic momentum. The Greater Bay Area is not only an international center of scientific and technological innovation, but also the most concentrated region for plastics processing in China. Plastic products output within the nine cities reached 11.17 million metric tons in 2019, representing more than 13.6% of the national total (second only to Zhejiang Province) or 83.4% of Guangdong Province’s total output. The region’s huge market, together with its abundant resources and strong innovation, will help to further advance the plastics and rubber industries. Shenzhen at full throttle - Shenzhen was made a Pilot Demonstration Area in 2019, as well as being one of the core engines of the Greater Bay Area. In 2018, the total industrial added-value of the Greater Bay Area reached 2.82 trillion RMB (about US$399 billion), of
which Shenzhen accounted for the lion’s share of 32.3%. “Technology + Innovation” is Shenzhen’s business profile, with more than 3 million companies located there, including Huawei, ZTE, Tencent, DJI, BYD, TCL and other industrial leaders. In 2018, Guangdong Province invested 270.47 billion RMB (US$38.3 billion) into R&D funding - the highest in China - and Shenzhen was the leading city within Guangdong. Embrace post-pandemic opportunities Over the years, China’s plastics and rubber industries have laid a solid foundation and built strong resilience and continuity into the economy. Combined with continually emerging new trends and opportunities, all signs currently point to a positive outlook.
In the first quarter, as a result of the coronavirus pandemic, business shutdowns, the Chinese New Year off-season and other factors, China’s plastic products output dropped 22.9% from the same year-ago period. Production resumed in April in an orderly way, and industries’ supply chains gradually returned to normal operations. In April, the year-on-year decline in the total output of plastic products narrowed, achieving a recovery of 8.6% from the previous month. In the battle against the pandemic, plastics played a key role in the production and supply of vital healthcare materials, personal protective equipment, medical supplies, and medical facility construction.
100+ Chinese and international media joined the press conference
OCTOBER 2020..............................................................
Plastics
& Plastics & Rubber
7
EXHIBITIONS
The pandemic also fueled the rapid growth in demand for takeaway service, fresh meal delivery, express delivery, convenience foods, household electronic product, medical supplies and fitness equipment. The post-pandemic era is seeing the acceleration of nextgeneration 5G wireless technology, artificial intelligence (AI), autonomous vehicles, high-end medical products, antibacterial and antimicrobial surfaces for use in everything from cars to appliances, and more. Demand is expected to remain strong for new materials and technology, including those for key medical applications, safe and protective packaging, and digital production -- as well as for recycled and recyclable materials. 5G is the frontrunner when it comes to the “new infrastructure”. CHINAPLAS 2021’s new rotation to Shenzhen has the unique advantage to help companies in the plastics and rubber industries to seize opportunities in this fast-growing infrastructure space. Shenzhen is actively building a worldclass 5G industrial cluster, and is home to a complete 5G industry chain of globally competitive enterprises such as Huawei, ZTE, and more. The resources related to this concentrated cluster are helping to accelerate 5G application development. As a hightech, high-quality and high-value trading and technology platform that caters to the latest market trends, CHINAPLAS 2021 will enable industry players to respond swiftly to market needs and stay ahead of the curve in a dynamic environment. Debut in the Greater Bay Area “In addition to the favorable outlook of the Greater Bay Area, CHINAPLAS’ decision to move to Shenzhen also takes into account the Shenzhen World Exhibition & Convention Center, an ideal venue for a world-class trade show,” notes Norris Chu. “We’ve been doing a field assessment and multi-party evaluation since the center launched in September 2019. Its 400,000 sqm of indoor exhibition space can alleviate the constraint of booth area we experienced in Guangzhou and support CHINAPLAS’ long-term growth. All of the 19 exhibition halls feature column-free structures and are located on the first floor, very suitable for displaying largescale machines, and easy for visitors to navigate. The advanced hardware features and supporting services will provide exhibitors and visitors a very convenient and refreshing experience.” The Shenzhen World Exhibition & Convention Center is situated at the heart of the Greater Bay Area. It is located in the center of the city cluster
8
Plastics
The fairground is situated at the heart of the Greater Bay Area
and close to the Shenzhen Bao’an International Airport, well-connected to the Hong Kong International Airport. Sea, land and air transportation are readily available in all directions and routes, and the industrial cities in the Pearl River Delta are closely linked. It is particularly worth noting that this is the world’s first exhibition center with full 5G coverage. Chinese and international exhibitors and visitors will be able to experience eye-opening intelligent and innovative services, such as dining, navigation, parking, and so on. “CHINAPLAS+” Online + Offline New Trade Services Experience In addition to a new fairground experience, CHINAPLAS 2021 will also leverage an “online + offline” strategy to unlock new trade services experience. As advanced deployment of digital technology is a trend embraced by all industries, CHINAPLAS is also accelerating the integration of online and offline show experiences. The organizer is pleased to be launching “CHINAPLAS+”. For online experiences, CHINAPLAS has successfully held nine webinars on hot topics during the pandemic, building a cloud communication bridge for industry players. The organizer soon will be introducing an online business matching service, extending the value of matching demand and supply online; during the show, the organizer will partner with Chinese and international media to provide live streaming of the trade show and facilitate online interaction. For offline experiences, the organizer will host new technical seminars and publish materials such as “FEATURE: RESUMING PRODUCTION” prior to the show, whereas international forums on industry trends, Tech Talk, thematic events on hot topics will be organized during the show to create a seamless
& Rubber
integration between online and offline activities and transform a fourday exhibition to a 365-day, non-stop communication platform. Dig deep into the new potential of the Asian market While based in China, CHINAPLAS, the International Exhibition on Plastics and Rubber Industries, has a strong influence throughout Asia. In 2019, the show attracted 163,000+ visitors, 22.8% from overseas - of which 70% were Asian visitors. Asia is the world’s most dynamic region with unique advantages. It accounts for more than half of the world’s population, features an ever-expanding middle class, continually upgrading consumption and technically advancing industries, and growing demands for plastics materials and machinery. The exhibition will continue to deepen its focus on the Asian market through multi-faceted promotion to fully tap the unlimited potential of the market. With “New Era • New Potential• Innovation for Sustainability” as the new theme and slogan, CHINAPLAS 2021 will take over the Shenzhen World Exhibition & Convention Center, from April 13-16 next year, with more than 3,600 global exhibitors occupying a world-class exhibition area of 300,000 sqm. We hope you can join us, along with visitors from different enduser markets of plastics and rubber industries from around the globe, to explore the countless materials innovations and technology developments in this exciting new location and venue. See you in Shenzhen next year! The “9+2” cities refer to the 9 cities: Guangzhou, Shenzhen, Zhuhai, Foshan, Huizhou, Dongguan, Zhongshan, Jiangmen, Zhaoqing; and 2 Special Administrative Regions: Hong Kong and Macao. 1
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
New project acquisition for AMUT Group recycling technology in the Far East
The Italian Group will contribute as a turn-key supplier to the most important project for sorting and recycling postconsumer PET & HDPE bottles, carried on in the last two years in South East Asia Region
A
MUT has been awarded a new tender project by a joint venture between two world leader groups, specializing in raw materials production and rigid packaging solutions, engaged in the circular economy, in the Far East and worldwide. The Italian Group will contribute as a turn-key supplier to the most important project for sorting and recycling post-consumer PET & HDPE bottles, carried on in the last two years in South East Asia Region. The lines, which will be processing light weight bottles with high percentages of PVC and non PVC shrinkable sleeves, will feature a double De-Labeller configuration.
10
Plastics
In the first stage the AMUT patented De-Labeller performs a dry cleaning action able to detach most of the shrink sleeves labels while the second unit is a wet De-Labeller working as cold pre-washing, allowing to remove contaminants, without damaging the bottles and avoiding to lose the bottles necks during the process. The washing process will include a plant for sorting and recycling postconsumer PET bottles, to make r-PET high purity flakes intended to be used, after being treated through extrusion and SSP (Solid State Polymerization), in the beverage industry to produce preforms containing r-PET, with a total capacity of 30,000 ton/year as net output. Another plant will be dedicated to sorting and recycling of post-consumer HDPE bottles for the production of r-HDPE flakes food grade and, after being treated through extrusion, destinated to the flexible and rigid packaging industry. The plant will have a capacity of 15,000 ton/year of r-HDPE. AMUT washing technology is specifically studied to enhance the quality level and purity of flakes, suitable for the manufacture of new generated bottles. The whole process is engineered to comply with the most demanding bottle-to-bottle applications while minimizing operational costs, fresh water usage, cleaning agents and energy consumption. Fresh water
& Rubber
usage is reduced to 1,1 litre for each kg of high purity flakes, thanks to AMUT patented Friction Washer unit. The plant is scheduled to come online by the end of the next year. This new order clinched testifies how AMUT’s technology and know-how, developed over the years in the recycling field, are recognized as the best available on the global market and to contribute to environmental preservation. AMUT (Apparecchiature Macchine UTensili), established in 1958, is a global plastic processing, recycling and waste sorting & recovery systems designer and manufacturer. Over the years the company has evolved considerably and become a group providing customers with an increasingly extensive range of high-quality extrusion, thermoforming, recycling, flexo printing and converting machinery, lines, turn-key plants and related Services. The world Headquarters and production facility is AMUT S.p.A. which is located in Novara (Italy). Candelù (Italy) and Vigevano (Italy), complete the manufacturing sites. Operating globally, the group’s offices and customer service centres are strategically located in U.S.A., Canada, and South East Asia. This international presence is further enhanced through an efficient worldwide agent network. Learn more at www.amutgroup.com
..............................................................OCTOBER 2020
EXHIBITIONS
The new marketplace for implementing the digital transformation in the plastics industry: Fakuma-Virtual The plastics industry is looking to next year optimistically, when it will once again be possible to invite customers directly and explore and develop complex applications in close, individual contact
T
he Fakuma international trade fair for plastics processing has been officially launched on its new digital trade fair platform, namely Fakuma-Virtual. Immediately after postponing the scheduled trade fair dates in 2020 to next year, trade fair promoters P. E. Schall GmbH & Co. KG acted quickly and officially opened the new digital meeting place for suppliers and users of industrial plastics processing. Exhibitors are showcasing their
12
Plastics
trade fair highlights, product innovations and sustainability features in a compact format in attractive, ideally structured virtual showrooms, along with web-based presentations with the help of a webcast function. Valuable leads and perfectly matched business contacts are generated for the international expert audience by the integrated RFQ for individualised problem-solving on the landing page of Fakuma-Virtual. Fakuma is deemed the first port of call for injection moulding, extrusion technology, thermoforming and 3D printing. It presents innovations covering all aspects of materials, machines, peripherals, processes, simulation, procedures, technologies and tools, as well as plastics processing – now in virtual format too. Industrial users from the plastics sector need practically implementable and economically efficient solutions for upcoming, farreaching transformation processes – especially in economically difficult times. And thus to an ever greater extent, connectivity is becoming
& Rubber
a living reality within the trade fair landscape of P. E. Schall GmbH & Co. KG. “In particular during the course of this extraordinary year, Fakuma-Virtual provides exhibitors with strong benefits at comparatively low costs. In order
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER sustainability, efficient use of resources, circular economy and bioplastics. With the help of the integrated, thematically focused search engine, expert visitors at FakumaVirtual can select any desired information concerning the trade fair nomenclature in an optimum fashion, or collect relevant, targeted matches for their business by entering keywords. What’s especially clever is the fact that in the end, a functional hit list is generated. Visitors are thus provided with the opportunity of sending individualised RFQs to the exhibitors included in the highly qualified search results, in order to mutually work out special solutions – like they would at an on-site event. Suppliers and users are thus provided with ideal conditions for setting out on their mutual path towards best possible attainment of their goals for everyday industrial practice. And thus Fakuma’s portfolio of products and services is continuously available to all interested parties at the new virtual technology venue in an ideally structured manner. “We’re convinced that Fakuma-Virtual offers a promising alternative for
gathering information concerning industry trends in an uncomplicated manner in our current situation. Visitors are able to familiarise themselves with numerous innovations very quickly. At igus, this falls under the mission statement ‘Tech up, costs down. That’s our job.’ – with over 100 motion plastics innovations this year which verifiably and sustainably improve technology and reduce costs,” says Oliver Cyrus, head of public relations and advertising at Igus GmbH concerning the new opportunities provided by Fakuma. However, Fakuma-Virtual will definitely not replace personal, face-to-face dialogue. The plastics industry is looking to next year optimistically, when it will once again be possible to invite customers directly and explore and develop complex applications in close, individual contact. Schall makes trade fairs for markets – for real markets. The next Fakuma international trade fair for plastics processing will take place in Friedrichshafen on beautiful Lake Constance from the 12th through the 16th of October, 2021 – accompanied by the extended range provided by Fakuma-Virtual.
P.E. SCHALL GmbH & Co. KG - www.fakuma-messe.de
to kick off his virtual presentation, all the exhibitor has to do is upload information which is already available for the trade fair anyway in the usual data formats. This is automatically networked via the content management system. With our additional new focused trade fair offerings, we’re moving up quickly to the required level of practical solutions for technological change in an uncomplicated manner. And we continue to promote sustainable success in the plastics industry,” explains Bettina Schall, managing director of the trade fair promoters. Intelligently Networked Technology Meeting Place for Fakuma Visitors As of immediately with its new virtual format for the 27th Fakuma, the globally unique trade fair which is awaited each year with great expectancy is providing an additional, lasting opportunity for gathering information concerning premieres, product innovations and important exhibitor news concerning sustainability at a single digital marketplace in a concise and compact manner. As is well-known, more and more attention is being focused on the issues of environmental protection,
14
Plastics
& Rubber
..............................................................OCTOBER 2020
Technology in technopolimeric material Mould and mould-flow design for thermoplastic articles Mould design for elastomeric articles Print of technical details in thermoplastic materials Print of elastomeric technical details Ultrasound soldering – high frequency – hot blade Quality service: analysis on technical articles produces and test of in/outcoming materials
FIELDS OF APPLICATION OF OUR PRODUCTS BOTTLING PACKAGING AUTOMATION LABELLING PAPER TRANSFORMATION PHARMACEUTICAL VALVES AND FITTINGS PNEUMATICS
WORLD OF PLASTICS & RUBBER
Tailor-made solutions featuring high-tech automation PRESMA is the only company to produce specific models for the moulding of resin corks for enological use
P
RESMA, a leading manufacturer of multistation injection moulding machines for thermoplastics, is the only company that produces specific models for the moulding of resin corks for enological use. The specific range for this field can count on 4 models based on productivity and final application. These machines are offered not only for the production of cylindrical wine corks, that can be personalized with raised logos on both sides, in two colours/materials, but also for “T” closures used for spirits and drip caps for oils. For these last two models, considering the number of different versions with different dimensions and configurations, we designed tailor-made solutions equipped with high tech automation that guarantees constant production and quality of the product. ROTO T1/24, the less productive model of the range, is offered as standard, XL and XXL that can be equipped with insert loaders, to allow the manufacturing of T Corks with heads up to 50mm diameter and 48 mm in height. Its main feature is the vertical mould holding table. It
16
Plastics
& Rubber
can be offered as a hybrid or fully electric machine (except model XXL) that can reach a production, when moulding small corks, from 1200 to 1500 pieces/hour. For the higher injected volumes with longer cooling times the output decreases to 700/800 pieces/hour. ROTO T1/48 V EL stems from the need to produce “T” corks with the automatic loading of different size of plastic and wooden caps, without mould changing.
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER The machine, which is equipped with 48 moulds for injecting the leg only, uses the cap as a sort of cover; its positioning is made through a double pneumatic slide. A suction cap picks up the insert and drops it onto the upper side of the carousel. During the injection process, a pneumatic cylinder mounted at the corresponding station, ensures the necessary contrast. The hinged type horizontal plasticizing unit is equipped with a vertical nozzle head, injecting from the bottom. This machine can also produce “T” corks, without caps, as well as wine corks; it is possible to set different parameters on a certain number of stations which allows it to run two different kinds of cork at the same time. These are divided after the ejection process. The output is 1,000/1,400 pcs/ hour. ROTO T2/48 and Roto T4/48 are respectively the mid to high performance models. Both solutions can be built as the “XL” version giving a maximum cork size of 38 mm diameter and 46 mm height. The quality of the moulded corks is guaranteed by the direct injection into single cavity tools. In the T2 model, the nozzles are aligned with the 48 single cavity mould holders on the carousel; the T4 machine is equipped with 4 nozzles positioned by 2 overlying carousels with a total of 192 moulds. During each injection process, Roto T2/48 produces 2 corks, Roto T4/48 exactly the double. With these 2 models, it is possible to run different products such as wine corks and/or “T”-corks in 2 or 4 colours or 1 and 2 two colour corks using different materials. If we consider single component parts, for both machines the cycle time is between
1,9 and 2,1 seconds, obtaining an hourly output of around 2,500/3,500 (T2/48) and 5,000/7,000 (T4/48). Two new models have recently been added to the range: the ROTO T2 / 45 which differentiates it from the tested ROTO T2 / 48 for the number of stations, the new actuation of the mould-holder table and the new mould opening / closing system, created to meet very specific needs in the production of particular caps T for spirits. As for the others, this model is also offered in the hybrid and electric version and can also be equipped for bimaterial / two-colour moulding and with insert”. The ROTO T-8 is a small eight stations rotary machine designed for the production of samples ensuring the same moulding quality as the “older sisters”. Due to the few mouldholding stations with which the press
OCTOBER 2020..............................................................
is equipped and the necessary cooling times, productivity is significantly lower. This version is reserved for those companies that need to do moulding tests, samples or even small productions and can therefore have a dedicated press without necessarily having to do it on production presses. All the available models can be equipped with an insert loader for “T”-cork rigid caps and with pickand-place units to run doublecolour/double component corks in automatic (only by ROTO T/2 E T/4 models) mode by putting the part injected with the first component into the adjacent tool and moulding – on the second component/ colour. With this system, it is possible to produce corks for sparkling wine with different densities on either side and “T” corks with the “head” in a different colour In the “fully electric” version, the drives of the “transfer” injection unit are with electro-motor driven by frequency converter for the plasticizing unit and with brushless motor for the injection cylinder. The table rotation is electro-mechanic. The reliable “Rotologic” software, entirely developed by Presma, guarantees an optimum management of the machine functions and of the personalization requested by every single end user. Also, thanks to its set-up for modem and internet assisted remote service, it is possible to provide a just-in-time after sales service.
Plastics
& Rubber
17
WORLD OF PLASTICS & RUBBER
Automa by Magic, almost 50 years in extrusion blow moulding Automa offers excellent service, improved components and implemented solutions to meet any blow moulding requirement
A
utoma. Who does not recognize this name? Who has never heard of it or has never met it at a trade
fair? Almost 50 years of history in Extrusion Blow Moulding; over 3500 produced machines, most of them still in operation. Well, Automa is back. After the period of time that led to its liquidation, it has returned. Thanks to the foresight of Ferruccio Giacobbe (Magic MP) who avoided the prestigious Italian brand ending up in foreign hands, here it is again, on the scene of the Extrusion Blow Moulding industry. Automa by Magic has been established in October 2018, thanks to a concerted action by some
20
Plastics
professionals of the sector and Magic MP itself. It continues to provide for and support Automa customers, and others, with spare parts, technical service, new PLC systems with its own software, UNIKOÂŽ, which vertically fits into any Extrusion Blow Moulding machine, both continuous and accumulation ones. Not restricted to the above, Automa by Magic was also born to build new hydraulic machines, based on Automa and Magic projects, revisited in a modern way, with improved components and implemented solutions. The equipment range includes the traditional shuttle machines, single and double station, and models with accumulator heads for the automotive and technical products industries.
& Rubber
For those customers who are strongly faithful to a technical tradition which makes them independent; for those destinations where the stability of the electricity line can be an enemy of all new full electric technologies; for these and other cases, the demand for hydraulic solutions is still active. Automa by Magic, in its new building in Imola (Bologna, Italy), manufactures new EBM machines using a network of highly qualified and experienced suppliers. The machines are manufactured, tested and then sent to their destinations where skilled technicians carry out the commissionings. Also existing machines complete overhaulings are carried out inhouse. Automa By Magic technical department intervenes to plan and develop all necessary conversions and updates agreed with endusers. Special attention is dedicated to all those technical improvements aimed to extend machines life and increase the active and passive safety, in case it is not sufficiently adequated or totally absent. This, besides the equipment modernization, increases machines efficiency, production and operators safety. Automa by Magic has an automated storage/retrieval system with various types of spare parts for Automa and Blow Star machines. All spare parts are produced according to original drawings, adopting the same technologies and materials as in the past and when possible upgrading them with last generation components
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
and long lasting solutions. Many parts are technically updated to improve their performances and are produced with CNC machines, to obtain perfectly and easily interchangeable items, even years later. This guarantees the duration and quality of the spare part itself. Each customer will find in Automa by Magic a partner for any need he might have. Spare parts, optionals, new molds, accessories and/or special solutions will be controlled and integrated in any existing machine, making it as new. Automa by Magic provides customers with more than thirty years of experience in the field as its staff is made up of technicians and experts who have gained their valuable experience with Automa and other manufacturers, allowing Automa by Magic to assist customers in general on various brands in the Extrusion Blow Moulding market.
The partnership of two brands that have technically and technologically influenced the Extrusion Blow Moulding worldwide market, are joined today in Automa
OCTOBER 2020..............................................................
by Magic. All this can only be a new and great benefit for the market and for customers who still have their machines running and can continue to use them for many more years to come. Since the constitution of the company, back in October 2018, Automa by Magic has already built and sold a tenth of machines between shuttle and accumulator technology. One of them has been for the production of 15, 19 and 20 L bottle in Polycarbonate for the production of big water bottle with handle. Other machines where either single and double station for multilayer and PP clarified material. All the machines have been sold complete of moulds, fully tested in the Imola facility. In the same period also several old machines have been refurbished and renewed in our plant of Imola (Bologna) either for Italian and foreign clients.
Plastics
& Rubber
21
WORLD OF PLASTICS & RUBBER
A company and its vision: a philosophy With its ongoing focus on developing the most modern technology available, Gimatic aims to provide something which enables clients to get more from their machinery and production: increased efficiency, longer lifespan, and reduced waste
S
ince it was first set up in 1985, Gimatic has always provided the market with a product not only as an end in itself, but a solution: something which can, by integrating the company’s deep-rooted innovative character, bring an idea to fruition. With its ongoing focus on developing the most modern technology available, Gimatic aims to provide something which enables clients to get more from their machinery and production: increased efficiency, longer lifespan, and reduced waste. This is effectively the definition of the company’s philosophy, which over time has been perfectly
22
Plastics
implemented in what is now the most important, representative range of products for Gimatic: the Plastics range. This includes all those components that, in endless combinations, create specialised gripper systems that enable any type of robot or automatic equipment to efficiently and safely remove injection-moulded products from their moulds. These End of Arms Tools, also known by their international acronym EOAT, are the ideal tools to enable the operator to handle products without damaging them, moving them as quickly as possible or inserting them into the finishing cycle or assembly operations. The Plastics range offers a selection of perfectly integrated, compatible and uniform items which aim to meet any requirement. From the smallest of parts in the pharmaceutical and electronics industries (thanks to grippers, vacuum cups and miniaturised suspensions)
& Rubber
to larger objects in the housewares or automotive industries (with the help of frames, slides and guides with exceptional precision and high load capacity), Gimatic’s global framework provides integrated solutions ranging from robot arms to the smallest peripheral finishing nippers. This represents Gimatic’s vision, being capable of producing one of the most comprehensive product ranges on the market. The parent company in Brescia successfully combines its local identity with international experience. The widespread established network, continually growing and developing, currently boasts 20 branches around the world. There are two local technical expertise centres: one in Serbia for the European market and one in China for the Asian market. A winning philosophy for Gimatic.
..............................................................OCTOBER 2020
EXHIBITIONS
Next Fakuma in October 2021! In cooperation with the exhibitor advisory board for Fakuma 2020, trade fair promoters P. E. Schall GmbH & Co. KG have decided to postpone the 27th Fakuma international trade fair for plastics processing to 2021. The next industry highlight covering all aspects of plastics processing will take place from the 12th to the 16th of October, 2021
T
his year’s Fakuma will be postponed until next year. From the point of view of the trade fair organisers, the 27th Fakuma could have been held in Friedrichshafen from the 13th through the 17th of October, 2020. “Together with all involved parties, we struggled for a long time to amend the general conditions demanded by the corona pandemic in such a way that Fakuma 2020 could have been promoted successfully,” says Bettina Schall, managing director of P. E. Schall GmbH & Co. KG. A hygiene and security concept was developed for safe trade fair promotion to this end. “We fulfilled all of the prerequisites. However, in cooperation with the exhibitor advisory board we’ve now decided to postpone Fakuma 2020 to October, 2021.” Rational Thinking, Care and a Sense of Responsibility Bettina Schall emphasises that this decision is based on rational thinking and a sense of responsibility: “As trade fair promoters, we see ourselves as service providers for our exhibitors and expert visitors. Current uncertainties amongst exhibitors and visitors, for example with regard to travel and sending employees to events, are making it necessary to look to the year 2021 with pragmatism and confidence.” The fact that time is now running short also speaks in favour
24
Plastics
& Rubber
of postponement. Cooperation partners and expert visitors waited for a long time for concrete information, but official regulations and decision-making delays forced them to be patient. The time has now come to focus on the future: “Exhibitors and expert visitors alike should look ahead to building on the success of previous Fakuma trade fairs. This is why we’re now all working together on thorough, detailed planning for the upcoming year,” says Bettina Schall. The mutual decision taken by the exhibitor advisory board and the trade fair promoters to postpone Fakuma 2020 underscores their care and foresight, as well as their consideration for the interests of the exhibitors and expert visitors. The efforts of all involved parties are now being focused on intensive preparations for the upcoming trade fair highlights of the plastics industry with the objective of getting ready for the future.
..............................................................OCTOBER 2020
EXHIBITIONS
P.E. SCHALL GmbH & Co. KG - www.fakuma-messe.de
Fakuma – Approaching the Future with Important Issues Fakuma is deemed the first port of call for injection moulding, extrusion technology, thermoforming and 3D printing. It presents innovations covering all aspects of materials, machines, peripherals, processes, simulation, procedures, technologies and tools, as well as plastics processing. The trade fair functions as an industry and technology barometer and is internationally networked. More and more attention is being focused in particular on the issues of environmental protection, sustainability, efficient use of resources, circular economy and bioplastics. With careful planning for Fakuma 2021, trade fair promoters P. E. Schall GmbH & Co. KG are now
establishing the necessary and suitable platform for adequately addressing these important issues, which are significant for the present as well as the future. And thus as a highlight for the industry sector, Fakuma 2021 will be an indispensable platform and is being awaited with especially great anticipation. The next Fakuma will take place from the 12th through the 16th of October, 2021. www.Fakuma-Messe.de
OCTOBER 2020..............................................................
Plastics
& Rubber
25
WORLD OF PLASTICS & RUBBER
Standing out as a leading producer of long radius pipe bends
Miozzo has been producing components for the pneumatic conveying systems for over 40 years and it is supplier of accessories for the best Italian brands
26
Plastics
& Rubber
T
he company Miozzo Srl has been producing components for the pneumatic conveying systems for over 40 years and it is supplier of accessories for the best Italian brands. Miozzo Srl stands out in Italy in the supply of bends for pneumatic conveyors and piping accessories on customer’s request. For over 20 years, the Miozzo family has stood out as Italian producer of long radius pipe bends for pneumatic conveying of powders and plastic granules. The company manufactures stainless steel pipe bends by cold bending on mandrel bending machines. Consequently, the pipe bends present insignificant ovality. The long radius pipe bends find mainly application in pneumatic conveying systems of granules. The company manufactures stainless steel accessories upon customer’s drawing. Often non-standard pieces are necessary during the accomplishment of the layout of storage plants and pneumatic conveyors of plastic granules.
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
Laser-drilled screens and filtrations down to 80 micron with Fimic melt flow into multiple filtration chambers and thus multiply all spare parts involved, resulting in an increase in operational costs that is directly proportional to the increase in production. The Fimic RAS melt filter, which is using one screen only, with an increased diameter as per project’s requirements, guarantees a significant reduction in operational costs, also thanks to an increase in the output performance.
Fimic technology has long realized the progressive shift towards the need to further refine plastics intended for recycling
F
imic technology, renowned on the market for years for its ability to manage highly contaminated materials with filtrations normally suitable for injection moulding applications (because the market demand was for these applications up until a few years ago) has long realized the progressive shift towards the need to further refine plastics intended for recycling. The RAS selfcleaning filter, using the laser-drilled screen with filtration down to 80 microns, not only allows you to recycle highly contaminated materials independently and continuously without the constant need for operator, but also guarantees a material which is clean and retaining at the same time its mechanical resistance properties. In fact, recycling companies who have chosen Fimic’s solutions for continuous filtration say that the obtained material is highly flexible and clean.
Reasons for choosing Fimic There are many reasons why this is a great choice; one of them being the wide filtration surface that the Fimic RAS melt filters are based on. The different sizes part of the Fimic range, feature a progressive increase in the diameter of the filter, which corresponds to an increase in production capacity (the largest model, the RAS700 has a filtration surface of approximately 3900 cm²). This key feature, among others, sets Fimic’s technology apart from its competitors on the market, who split the
28
Plastics
& Rubber
Materials which can be recycled with Fimic Contrary to popular belief, it is possible to process and transform waste having different contamination levels, even unwashed, into high-quality pellets suitable for sensitive applications such as blown films. A typical case study is commercial films (a.k.a. supermarket films or packaging films): this material stream is slightly contaminated, typically below 5%. Being a very specific material stream, it is made of up to 99% LDPE and LLDPE, with very low traces of foreign plastics. By applying Fimic’s laser filtration the contamination, especially from paper labels and adhesive tapes, is efficiently and smoothly removed without decreasing both operational pressure and output performances. The scraper continuously collects inside it the contamination from the screen and automatically releases it after a pre-set adjustable time period. In this way, the contamination never resides in the filtration chamber for more than a few seconds. It is well known that paper labels include sub-contaminants such as moisture, inks and glues which, if residing too long at high temperatures create extra gas formations leading to swollen, low-quality pellets. Fimic’s technology, combined with the use of Fimic’s laser screens (whether 80, 100, 120 or 150 micron), can efficiently handle the material and contaminations, guaranteeing an excellent pellet quality and at the same time, low melt losses, proportional to the contamination degree. The melt losses are, in fact, adjusted by the automated valve discharge mechanism, as this solution is not forced to discharge continuously, only when needed, thus avoiding unnecessary melt losses. Furthermore, as the discharge duration is only a few seconds long, the pellets shape undergoes no alteration whatsoever. For further information: www.fimic.it export@fimic.it
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
GVF Impianti: a complete answer for targeted solution Dense phase pneumatic conveying systems: the gentle way to convey products
ith more than 50 years of experience, GVF Impianti Srl is the ideal partner able to supply quality solutions for pneumatic conveying in dense phase and bulk material handling in sectors such as plastic, pet food, food, chemical and construction materials. The wide range of production represents the know-how and the experience gained in each
W
sector of application, thus making the company able to design and produce components, complex machines as well as complete turnkey plants since 1964. Quality and innovation are keywords of GVF Impianti work. Solutions for bulk material handling If you are searching for a complete plant for bulk material handling, GVF Impianti is the right partner. From the plant calculation to the installation on site, it can supply different solutions for product discharging, weighing, dosing, transporting, mixing, screening, filtering, and storing. Indeed, its production range includes: • Big-bag discharging systems • Sack emptying machines • Pneumatic conveying systems in dense phase • Pneumatic conveying line components • Diverting valves • Mechanical conveying systems • Dosing systems • Screening systems • Horizontal mixers • Cyclones and filtering systems Low transport speed, reduced energy consumption and no products’ contamination during transport. What you should consider when thinking about a dense phase pneumatic transport system
30
Plastics
& Rubber
Is your product a fragile material? Is it a highly abrasive material or should you do some product changes during your production processes? Would you like to have a reliable solution which allows you to save energy and maintenance costs? Low speed in the pipeline, wearresistant components, cleaning cycles after transporting and a small amount of air consumption are only some of the advantages that you can obtain using a GVF Impianti’s dense phase pneumatic conveying system. Two are the transporting logics that this company usually provides, dense phase and extra-dense phase. In dense phase pneumatic conveying systems, the product flows at low speed into the transporting pipeline and a cleaning cycle is executed after each launch. Otherwise the extra-dense phase system allows to transport the product with the pipe full of product, thanks to a fine setting of the pressure management and allowing to transport fragile products in a gentle way. Distinctive marks What distinguishes all GVF Impianti’s pneumatic conveyors is the special design of the components and the unique air distribution system, which distributes the compressed air in
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
three main parts of the vessel: in the outlet, laterally, and inside the vessel. To these features you should add: • An automatic management system • A low wear of pipelines and bends • Reduced product un-mixing • A very low air consumption • An efficient air/product ratio • No mechanical moving parts • Low operational and maintenance costs • Construction material both in carbon steel and stainless steel
32
Plastics
Three main types of conveyor explain the production range: GA (with loading butterfly valve suitable for normal wearing products), GC (with an innovative loading conevalve for highly abrasive products), GA COMBO (compact and modular for reduced available space). On request, it is also available the version with load cells, for weighing the material before the transport, the HP (High-Performance) version for long distances and big hourly capacities, the HT version for products with high temperatures and the Atex classified version. A full range of components for the pneumatic transport lines completes the company pneumatic conveying systems production: pipeline boosters, wear-resistant bends, wear-resistant terminal boxes, two-ways diverter valves and multi-ways diverter valves (from 3 up to 12 ways). In-house production of PED compliant vessels To improve the production quality and to control all the production processes internally, GVF Impianti Srl is WPS (Welding Procedure Standard) certified. The company produces in-house PED compliant vessels for its pneumatic conveyors, certified by TÜV (CE0948). This leads to a higher possibility of products customization and to a stronger level of control for the entire production system quality.
& Rubber
All-round service: from design to installation GVF Impianti all-round service begins with specialized engineering and technical staff that listen to customers’ needs and turn them into a targeted project. GVF Impianti in-house production, with skilled carpentry staff, manufactures the end solution. The specialized mechanical staff install the system on site and the after-sales service gives the customers a prompt support. A complete answer for targeted solution.
..............................................................OCTOBER 2020
EXHIBITIONS
PLAST will be the most relevant European event for the plastics and rubber industry in 2021, a critical occasion for operators to meet and talk and plan new investments
A
fter the suspension of all non-essential activities due to the Covid-19 pandemic, o r g a n i z a t i o n commences for PLAST 2021-international exhibition for the plastics and rubber industries, taking place in Milan from the 4th to the 7th of May of next year.
34
Plastics
Roughly 450 direct exhibitors (excluding the represented companies) have already confirmed their participation in the fair, reserving an area of 35,000 m². One fifth of subscribers are foreigners, in addition to Italian branches of foreign machinery manufacturers. The effects of the epidemic greatly conditioned worldwide fairs, causing the cancellation of all events in spring-summer 2020 and moving the ones planned for this autumn to 2021. This was the case for various international plastics and rubber industry fairs and also for important events regarding the packaging and converting sector, such as Interpack and Drupa, originally planned for May and June 2020 but postponed to the period between early March and late April 2021. Such changes led to the decision to confirm the next edition of PLAST to 4-7 May 2021 and to reschedule the other four fairs of The Innovation Alliance (IPACKIMA, MEAT-TECH, PRINT4ALL, and INTRALOGISTICA ITALIA), also due to the congestion at the Rho-Pero exhibition district. This decision originates in the extraordinary situation of recent months with the objective of preventing overlaps, which would have caused difficulty for both companies and operators. The Innovation Alliance project, favouring synergies among complementary sectors, is still a definite go. Although the five exhibitions are scheduled for different times, the organizers have already begun to plan unifying initiatives to assist operators in the planning phase. The PLAST Office is again fully operational and, to facilitate potential exhibitors in the decision process (taking into consideration the obligatory shutdown in March and April), has extended the deadline to 31 July 2020 for benefiting from a 10% discount on the participation fee and priority stand assignments, which will be made starting in September.
& Rubber
Organizers are thus confident that they will see reservation numbers similar to the 2018 edition. PLAST will be the most relevant European event for the plastics and rubber industry in 2021, a critical occasion for operators to meet and talk and plan new investments. Below, some key figures for the past edition of PLAST, which took place from 29 May to 1 June 2018 in Milan: • total fair area: 55,000 m² net • exhibition sectors represented: 75% machinery, 20% materials and products, 5% services • total exhibitors: 1,510 from 55 countries (57% Italian, 43% foreign; 1,049 direct and 461 via representatives) • satellite fairs: RUBBER (rubber industry), 3D PLAST (3D printing and related technologies), • PlastMat (innovative materials) • visitors: 63,000 (27.5% from outside of Italy) representing 117 countries. The upcoming edition of PLAST will once again feature the three satellite fairs, each dedicated to a sub-sector of excellence and its associated start-ups: RUBBER (in its fourth edition, dedicated to the world of elastomers, in collaboration with ASSOGOMMA), 3D PLAST (in its third edition, focusing on additive manufacturing and related technologies), and PLASTMAT (second edition, exploring innovative plastics). The list of participants is constantly updated and can be found on the website plastonline.org.
..............................................................OCTOBER 2020
PLAST PROMOPLAST SRL UNIPERSONALE - www.plastonline.org
PLAST 2021: The organization process restarts
WORLD OF PLASTICS & RUBBER
A small company for a big quality: underwater and water ring pelletizers
Filtec specializes in customized polymers cutting systems and at the time of CoVid it has staunchly provided its customers with an efficient and prompt service
36
Plastics
F
ounded in 1993 Filtec is an Italian company specialized in the creation of customized polymers cutting systems. Filtec is widely known for the Water Ring and the Underwater pelletizers. With these systems it is possible to cut every kind of polymer, even the most critical ones. The Water Ring Pelletizer GRO type allows a safe and easy pelletizing process for a wide range of polymers such as LDPE, LLDPE, HDPE, PP, EVA, PS, SAN, ABS, SB, PMMA, TPR, TPU, PC, TR, PVC and Polycarbonate from 20 to more than 3,000 Kg/h. The best performances are there when these materials have low fluidity index or are filled with inert minerals, pigments, or others. The Underwater Pelletizer UW type is a versatile machine, good also for high-fluidity polymers. This system is ideal for micro-pellets
& Rubber
production and it allows to obtain a homogeneous product without agglomerates. In addition to the above-mentioned materials pelletized by the WRP (Water Ring Pelletizer) GRO type, the Underwater Pelletizers UW type can also easily pelletize compound based on PBT, PB1, PET, TPR, TPU, SBS, SEBS, PA6 and 6.6 from 30 to more than 5,000 kg/h. Filtec products range also includes water filters, screen changers, vertical and horizontal centrifuges and vented vibrating screens. To learn more about this company products and services, visit the website www.filtec.it Filtec at the time of Coronavirus Filtec is based in Badia Polesine, in Northern Italy, a place characterized by flourishing industry and historically devoted to work. Over the last months, Filtec has been facing great challenges: everywhere COVID-19 has had a big impact. Mindful of its abilities and responsibilities, this company has worked hard to provide an efficient and prompt service to its customers.
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER During these months Filtec faced with the proof that a problem can be a good opportunity, opening new way to proceed. This company, even if of limited dimensions, never stopped working from home. Despite the situation Filtec has improved its internal procedures with new instruments and management software. Indeed, the company has adopted an integrated CRM, useful for a better organisation of both sales and purchasing. The technical department has acquired a new PDM, that connects the product code to the relevant experience in the creation of 3D design.
In this particular time of Coronavirus, Filtec has never forgotten the worldwide cause related to plastics recycling and circular economy. The current hygiene conditions show that more single-use plastics are required. As result, plastic waste is increasing and this company believes that in order to move towards a circular economy more plastic waste needs to be recovered and reused. A very common method, increasingly used, is the mechanical recycling, that refers to those operations that aim to recover plastics waste via mechanical processes. Through mechanical recycling, it is possible to process the plastics waste into secondary raw materials or products without significantly changing the chemical structure of the material. Part of Filtec business is indeed
represented by the creation and production of machines involved in recycling processes. In order to actively promote the importance of plastics recycling, Filtec together with 3 Italian companies, has decided to create the project “Are You R� ( www. areyour.org/en ). The letter R stands for recycle, reuse, reduce and all those words related to world of plastic recycling. Indeed, this programme aims to increase public awareness of the environment and the knowledge of the benefits associated to the recycling of plastic materials. By talking every day about the re-use of materials from multiple perspectives, Are You R has become a reference point for tens of thousands of people that every day exchange views with a common denominator: the willingness to play an active role in environmental sustainability. Filtec recycles and you? Make your right choice.
Filtec will exhibit at:
OCTOBER 2020..............................................................
Plastics
& Rubber
37
WORLD OF PLASTICS & RUBBER
rPET bottles for the circular economy The use of r-PET (recycled PET) for manufacturing new bottles is the core of the concept of circular economy, and SMI offers its latest products featuring the best smart and green technologies
T
he environment has become a collective asset that everyone must take care of and this aim can be achieved by investing in industrial plants equipped with “green” technology, which save energy and reduce the environmental impact of production, like SMI stretch blow moulding machines in stand alone version (EBS ERGON Series) or integrated with an electronic filling and capping module (ECOBLOC® ERGON Series). Companies in the food and beverage industry are reviewing their production processes to make them as eco-sustainable and competitive as possible by making use of “smart and green” technologies of industrial automation and recyclable and biodegradable packaging. The sustainability of entrepreneurial activity is a demanding and strategic choice, made up of large and small objectives that are achievable thanks to a particular cultural attitude and continual investments,
38
Plastics
in new plants equipped with IoT (Internet of Things) technology, that allow the machinery to improve and adapt independently to the new production requirements of the 21st century. Packaging sustainability Packaging sustainability is a key issue, in particular for the beverage industry, in which more and more questions have been raised about the material to be used for safe packaging, with limited impact on the environment. Recent studies have shown the benefits arising from the use of plastic bottles, since this solution is unbreakable, safe, with great barrier properties, lightweight and above all recyclable! In comparison with other packaging materials, such as glass or aluminum, PET has a good environmental profile, mainly thanks to its lightness that translates into less material to produce, less material to dispose of, less energy used to
& Rubber
manufacture it and less fuel used for transporting packed products. Thanks to its recyclability and its great weight-capacity ratio, many producers of mineral waters and soft drinks promote and re-evaluate PET and r-PET as convenient and winwin solutions from the environmental sustainability point of view. The use of r-PET (recycled PET) for manufacturing new bottles is the core of the concept of circular economy, that consists of collecting materials after they have been used and processing them, so that they can be reused or recycled. Every time a PET container is recycled, its oil reserve is recovered and reused, eliminating the waste and reducing the packaging environmental impact, provided that efficient systems for managing waste and recycling exist. rPET is processed on SMI stretch blow moulding machines in stand alone version or integrated with
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
an electronic filling and capping module and shows no significant restrictions in terms of quality, safety and workability. The case of Eaux de Volvic When we talk about water purity, it is inevitable to think of the accurate work carried out by the Societé des Eaux de Volvic, company part of the Danone Group that has continuously invested in new solutions for preserving the quality. To achieve these goals, the company decided to invest in high tech machines and installed a SMI’s ECOBLOC® ERGON HC integrated system for stretch-blow moulding, filling and capping 8 L containers, with a square bottom, in 100% recycled plastics (rPET). Designed to ensure respect for the environment, the new eco-friendly bottle is the result of joint work between the specialists at Danone and at SMI, which has allowed to develop a preform able to guarantee the constant resistance of the container during the stretchblow moulding process. By using recycled PET in beverage bottles, every company can contribute to respecting the environmental and in developing an eco-friendly bottle suitable for the circular economy. The complete Volvic production process was designed so that every step of the bottling is kept under constant control, because it is here that the water, coming from the deep underground, comes into contact with the external environment and
is at a greater risk of contamination which would compromise the sensory, chemical, physical and microbiological properties. The Société des Eaux de Volvic SA, also, pays particular attention to everything that concerns sustainable development, environmental respect, product quality and purity, for this reason the whole bottling, packaging and distribution process was designed around these values and the machine supplied by SMI was integrated with sophisticate inspection systems, which, starting with the preforms, carry out a long series of checks to maintain the quality and purity of the spring water. Smart and green technologies Main advantages of the integrated system of ECOBLOC® series: • compact, flexible solution for stretch-blowing, filling and capping bottles in PET, with the advantage, in terms of reducing production costs, as the system does not need a rinser, nor conveyors between the blower and the filler or accumulation • isolating system between the “dry” area of the blower and the “wet” one of the fillers, through a jet of high pressured, sterile air in excess of 5Pa, which guarantees a clean, hygienic filling system. The air flow, through 4 units of Galvani filters (HEPA filters) situated on the top part of the filler area, spreads around all the interested area to avoid contamination, acting as a “clean room”. In addition, the filling valve is controlled by an electronic flowmeter.
OCTOBER 2020..............................................................
Plastics
& Rubber
39
WORLD OF PLASTICS & RUBBER
• application of various accessories to guarantee that the filling system is extremely clean and easy to sanitize with advanced cleaning systems • innovative preform suction system, situated on the oven in-feed star, to remove any tiny impurities that could be on the inside of the preform itself. The air that is inserted into the suction system is filtered, and is part of the air recovery system that comes as standard on all the range of SMI stretch-blow moulders. The system combines blowing air into the preforms with the following vacuum suction process. • machine integrated with sophisticated inspection systems with cameras to guarantee the quality of the bottled water, monitor the production process and avoid particles and/or impurities being deposited on the inside of the unblown preforms, • the preforms are blown with sterile air in a sterile environment; this sterility is maintained for all the process of filling and capping, • precise and fast operation, thanks to the electronic, operation control, to motorized stretch rods and the use of high efficiency valves with flowmeters, • reduced energy consumption: the stretch-blow module is equipped with a double stage air recovery system, which allows the reduction of energy costs tied to the production of high pressure compressed air, • high energy efficiency, thanks to IR lamps fitted onto the preform heating module, • filler area compatible with COP (Cleaning Out of Place) and equipped with optional system of stainless steel bulkheads to separate the “wet” area of the filler with the “dry” area of the blower during maintenance or cleaning operations. The bulkheads can easily be installed on the filler in-feed, with a star on the blower
40
Plastics
& Rubber
that can be disassembled, and on the out-feed, on the channel of the bottle out-feed, • electronic components positioned on the inside of the panels to make sure they have greater protection from the damp, • base of the filler area is made in stainless steel 316 and slightly sloped to ensure that any leak liquids go down the drains, • electronic capper equipped with cap orienting during application, system to control correct positioning of cap and a rejection system for overturned caps, • cap sterilization through jets of ionized air on the cap channel, • washable cap accumulation table, in stainless steel, equipped with an optional system to suction the caps to remove any impurities that might have deposited on them while moving along the hopper, • reduced maintenance and running costs of the machine. Top quality bottle means excellent preform and bottle inspection system The increase in production speed of bottling lines, the use of lighter containers, and the change in laws that are stricter, in terms of food product quality and integrity, force companies in this sector to use cutting edge technology equipped with advanced inspection systems for preforms, bottles and caps, this way preventing any non-compliance issue or contamination. To satisfy the quality standards of the Danone group, the ECOBLOC® HC ERGON supplied by SMI, is equipped with sophisticated Pressco inspection systems, leader in the inspection sector for containers in PET and reference point for all the companies which, like Volvic aim at having excellent quality standards.
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
Innovation, sustainability and productivity in the future of thermoplastics waste Binova highly competent team offers its extensive expertise to meet the demand of innovative solutions
T
he business initiative of Binova Plastic Machinery started in 2006 and it is oriented to the construction of plants to process thermoplastic materials. As far as it may appear as a new reality, it is a much rather consolidated productive project, in which many professional figures, with more than 30 years of experience in the field of plastics, have emerged. A highly competent team joined Binova and decided to use their expertise for the design, for the implementation and for the machinery installation in the plastic transformation.
44
Plastics
& Rubber
More in detail, Binova process handles with the recycling and the compound of production and/or post-consumer scraps. The company business aims to meet the high demand of innovative solutions in the recycling world, a subject that has become a matter of urgency in the contemporary societies. In this regard, Binova intends to turn plastic into an opportunity rather than a problem. In fact, it undergoes a process of virtuous, sustainable and highly productive transformation. Binova is aware of living in a very demanding society, which repeatedly asks for recycled products, that are able to maintain the same characteristics of the starting material. For this reason, it came up with solutions able to maintain a high-quality standard in the final product. The high level of effectiveness of its process allows Binova to have a relevant position in the busy market, where there are many strong competitors, who have been in the business for decades. These characteristics together with the innovative push, allow Binova to develop projects not only in Italy, but also in France, in Spain and elsewhere, in and outside Europe.
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
Binova thinks that the right path to take in order to increase the productivity, would be a particular attention to the Research and Development in order to come up with high-tech solutions. For a few years, Binova next-generation plants have been equipped with a software able to control the whole production even remotely. Binova’s innovation is oriented to the improvement of competitiveness. The company has recently developed a line, able to process in one single step what normally is made in two: recycling and compound, due to the use of a corotating twin- screw extruder, which
guarantees till 30% in energy saving, compared to the traditional singlescrew extruder. From a strategic point of view, it is a competitive line that reduces costs, optimizes the time production, and improves the distribution of resources. Binova’s ambition to excellence respects the principle of flexibility. Binova designs ad hoc plants, equipped with highly personalized configurations, that represents the perfect solution for any necessity. Binova has a close relationship with its clients, with whom it acts more like partners rather than suppliers. It offers support service and assistance during the entire professional
OCTOBER 2020..............................................................
relationship, from the highly qualified personnel of technical consulting post sales and from the ordinary plants’ maintenance to the special maintenance. Today more than ever, in an always more evolving market, are the bravest choices that make the difference. In 2017, Binova gained a fully strategic autonomy, financial and industrial, in order to face present and future challenges with a strong responsibility in the decision making and in full control of its process. It has recently invested in the acquisition of machine tools in order to guarantee much rapider deliveries and become more competitive. The constant and consolidated growth leads its future ambition to seek advanced solutions. It is with the same ambition that Binova wants to improve itself in the various world of plastics, which it will not stop exploring.
Plastics
& Rubber
45
WORLD OF PLASTICS & RUBBER
Premium technologies for top performances
NTE Process was established after more than 20 years of success and a solid reputation based on the technological expertise and knowing of the industrial processes of Nol-Tec Europe
48
Plastics
N
TE Process is the single source provider specialized in the process solutions for the plastic compounds, tire and rubber industry and in bulk material handling that will support you in all phases of design, supply and innovation of industrial plants. It can provide you with the best turnkey solutions on the market, thanks to patented technologies and international partners.
& Rubber
Over the last twenty years, the company has evolved from being the engineering company of pneumatic conveying in 1998 to a single global point of reference for all the needs of your business to always be able to be the sole partner for your company’s daily needs, in a flexible and efficient way. For this reason, the main market leaders of rubber and tire plants chose NTE Process for the rubber compounding process and to produce tires, tire components for the automotive industry, and electrical cables – areas where precise mixing of raw materials, high safety and quality standards are essential to ensure great performances. Also the primary plastic compounders trusted the NTE Process solutions such as masterbatch recipes, innovative air mixing systems, accurate dosing and gentle conveying of fillers, fibers and plastic pellets able to prevent any fines or product degradation. The main NTE Process applications dedicated to the plastic, rubber and tire industries are the following: • storage systems of raw materials; • powder dense phase pneumatic conveying systems “No Purge” concept with the patented Air Assist® technology (carbon black, silica, talc, small chemicals, additives, etc.) to hoppers;
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
• accurate batching for powder and oil dosing for the exact preparation of the recipes; • dust collectors; • precision rubber cutting lines; • railcar and truck unloading through the NTE Process Boot-Lift M529 that considerably reduces risks for operators during connection phase since it is completely automated and driven by pneumatic cylinders with variable stroke according to customer requests; • automation and control systems. Both vacuum and dense phase conveying systems provided by NTE Process proved to be the best technologies as raw material handling systems for the main tire manufacturers as it guarantees: • to protect the integrity of the carbon black pellets during the pneumatic conveying (fines increasing <5%); • to preserve the conveying pipes from premature wear in the case of pneumatic conveying with Air Assist® technology for silica conveying (fine, granular, silica chunk); • dust free management of bag dump and big bag unloading stations for carbon black, silica, zync oxide, resins and fillers. Other NTE Process’ typical applications are: • dust free bag dump and big bag unloading stations for raw materials and additives (small chemicals); • Atex proof handling systems for very explosive products such as resins; • Wonderbatch®: in-line formulation (innovative technologies for pigment room automation) which guarantees high flexibility to store ingredients off line from the production flow, but ready for immediate use;
• dedusting systems to store silos and daybins; • oil and silane injection, partially, into day bins: an innovative solution is designed to produce a product that has the ingredients dispersed and distributed sufficiently thoroughly that will process satisfactory in the next process and give the required properties for the end application. The mixing is performed by our innovative mixers (Air Mixer M244 & Jetmixer® M531) which are combined with the NTE Process Liquid Injection Skid M535 and you can inject up to 6 liquids at the same time, avoiding dust packing on the nozzle and drop effect that generally characterizes traditional injection systems.
OCTOBER 2020..............................................................
The NTE Process’ Innovation and Research Centre offers its customers the opportunity to test its technologies. NTE Process R&D Team “Apeiron” can perform both scientific tests (fluidity, aeration, consolidation, etc.) as well as full scale tests (spray drying, drying, solidliquid mixing, parallel processing, pneumatic conveying, etc.). The right process and design will be defined and calibrated on the basis of the specific needs of your business. In this phase, detailed reports will provide you with the most relevant information for the predictive analysis of performance and the preliminary system design. For more information: www.nteprocess.com
Plastics
Plastics
& Rubber
49
WORLD OF PLASTICS & RUBBER
Dr Markus Steilemann, Covestro’s CEO becomes new President of PlasticsEurope In light of current global challenges, the plastics industry is absolutely crucial to build a truly sustainable future and make the circular economy the new global guiding principle
P
lasticsEurope, the Pan-European trade association representing plastics manufacturers, today announced the appointment of Dr Markus Steilemann, Chief Executive Officer (CEO) of Covestro, as its President, effective immediately. He succeeds Javier Constante who recently became President of Dow Latin America. In this new role Dr Steilemann will drive forwards the association and its memberships’ shared vision for greater circularity and sustainability, across the industry. Dr Steilemann praised his predecessor for his instrumental role in overseeing PlasticsEurope’s reorganisation, accelerating its members efforts in progressing towards the circularity targets of our Voluntary Commitment and in passionately advocating for zero pellet loss into the environment. Javier Constante, President of Dow Latin America said: “I am delighted that Markus has been appointed to this key leadership role. Particularly in these challenging times, the industry needs a visionary and a capable leader like Markus, to create a truly sustainable future. With Markus at the helm, I believe that PlasticsEurope is well set-up to tell the story of the industry’s circularity transition.” Dr Markus Steilemann, PlasticsEurope’s new President said: “In light of current global challenges, the plastics industry is absolutely crucial to build a truly sustainable future and make the circular economy the new global guiding principle. Using end-of-life materials and waste as a resource for new products and improving plastics’ circularity across all applications are also enhancing our industry’s competitiveness and value creation. Our members have already embarked on this transformative journey and I look very much forward to continue working with all actors across value cycles to realise it together.” Dr Markus Steilemann has been Chief Executive Officer of Covestro since June 2018. He began his career with the Bayer Group in 1999, and from 2008 he held various
50
Plastics
& Rubber
management positions in the Polycarbonates business unit at Bayer MaterialScience, the predecessor company of Covestro. From 2013 to 2015, he went on to lead the unit’s global headquarters located in China. He joined the Covestro Board of Management in 2015, in Germany, and was responsible for innovation. In addition to this role, he became head of the Polyurethanes business unit in the following year. In 2017, he became Chief Commercial Officer, responsible for all three business units including innovation, marketing and sales. Dr Steilemann was born in Germany in 1970 and graduated with a PhD in chemistry from RWTH Aachen University. editor’s note: PlasticsEurope is one of the leading European trade associations with centres in Brussels, Frankfurt, London, Madrid, Milan and Paris. We are networking with European and national plastics associations and have more than 100 member companies, producing over 90% of all polymers across the EU27 member states plus Norway, Switzerland, Turkey and UK. The European plastics industry makes a significant contribution to the welfare in Europe by enabling innovation, creating quality of life to citizens and facilitating resource efficiency and climate protection. Over 1.6 million people are working in close to 60,000 companies (mainly small and medium sized companies in the converting sector) to create a turnover of more than 360 bn EUR per year. The plastics industry includes polymer producers - represented by PlasticsEurope, converters - represented by EuPC and machine manufacturers - represented by EUROMAP. For further info see the web links: www.plasticseurope. org, www.plasticsconverters.eu, www.euromap.org.
Dr Markus Steilemann, PlasticsEurope’s new President
..............................................................OCTOBER 2020
EXHIBITIONS
A change of leadership at interpack Comprehensive hygiene plan for the 2021 trade fair
T
and the related process industry. He has been part of the interpack team at Messe Düsseldorf since 2005 and led interpack 2017 on an operative level as Deputy Director. During this period, the father of three supported many formative themes for interpack, such as SAVE FOOD and the special shows under the innovationparc label. These are now also successful at the international events within the scope of the interpack alliance, which will also be led by Dohse in the future. The upcoming interpack in Düsseldorf was postponed from its original date in May 2020 to the following year, due to the Corona pandemic. It will now take place from 25 February to 3 March 2021 and continues to be fully booked. Messe Düsseldorf relies on a comprehensive hygiene concept in order to protect exhibitors and visitors. “interpack is the most important event in the international packaging industry and, especially in times of crisis, provides crucial stimuli in order to build a successful future for the companies involved. Therefore, we give our all in order to do justice to this responsibility
52
Plastics
& Rubber
and simultaneously guarantee the best possible protection of the health of the people coming to our trade fair centre”, emphasises Thomas Dohse. The hygiene plan has already proved that it lives up to its motto: “PROTaction - Back to Business” with Caravan Salon, the first trade fair at the Düsseldorf trade fair centre after the Corona break. After selling personalised tickets exclusively online before the trade fair, extensive hygiene measures shaped implementation of the concept on-site. Those interested can find details on www.interpack.com.
..............................................................OCTOBER 2020
Messe Düsseldorf GmbH
homas Dohse has been the new leader of interpack in his capacity as Project Director since the start of September. He follows Bernd Jablonowski, who rose to the Managing Board of Messe Düsseldorf as an Executive Director. Dohse has woven an excellent web of connections within the global packaging industry
WORLD OF PLASTICS & RUBBER
A dynamic solution provider Barra Project International offers the market products designed to grant the best support at every stage of the production chain: a more efficient production plant is safer and less expensive to manage
macro areas of competence born from the desire to offer 360° support in the management of bulk organic and/or inorganic solid material of different size in every industrial sector: from wood to plastic, from cement to aggregate, from milling to animal feed and much more. 1. AIRFLASH® & AIRFOM® - compressed air cannons Compressed air fluidization systems for granular materials stored in silos, hoppers, load cells, connection
3
AIRFOM Aircannon channel etc. The air-cannon, powered by compressed air (Pmax 10bar), generates a shock wave that acts directly on the material to be released without affecting the storage structures: these high-speed air injections eliminate bridges, compactions and incrustations of material that otherwise would reduce the load capacity of the storage facility and impede their emptying. The fluidizing action of the cannon is an improvement compared to traditional vibration systems whose use is often counterproductive as they increase the level of compaction of the material, damage the structures and cause noise pollution. As various and different are the industrial realities, so wide and varied
AIRFLASH Aircannon
54
Plastics
& Rubber
is the range of Barra Project aircannons, suitable for equipping any type and size of storage structures (cannon range from 0,5Lt to 150Lt; application temperatures [-10°C; +100°C]; possible to be installed even in areas subject to corrosion and/or thermal radiation). Main advantages: a. reduction/elimination of downtime risks due to the storage structures blocking b. greater safety for local operators thanks to the elimination of direct manual interventions to release the clogged materials c. continuous movement of the material and cleaning action of the structures; this avoids the creation of dead zones where the material is at deterioration risk for long periods of storage and optimizes the capacity of the storage facility 2. ECOFOG® - nebulization plants to reduce industrial dusts Thanks to the production of fog by spraying water at low pressures (air 2÷3bar; water 0.2÷0.5bar), ECOFOG® technology captures the dust particles avoiding their dispersion in the environment. The fog moistens the dusts making them fall back on the material itself and binding them to the material in a cohesive way, therefore the classic procedures for collecting and disposing of industrial dusts are not necessary (which happens instead for traditional filtration systems). Main advantages: a. The infinitesimal water supply used for the fog creation does not wet the material: thuseliminating the need for drying treatments.
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
adhesion to the carpet is guaranteed even in the case of belt discrepancies and in conditions of wear of the scraping blade. Since the characteristics of the materials to be removed are different, different are also the models of RASKIA® cleaner: blades entirely in high wear resistance polyurethane, blades in polyurethane with hard metal scraping insert, blades entirely in steel with hard metal insert. RASKIA® cleaners are also versatile in terms of tensioning solutions: mechanical, pneumatic and pneumatic selfpowered rechargeable tensioning, specially designed for those positions that are difficult to access. young and dynamic engineering team, an agile and lean production, years of experience and close collaboration with its customers for creating ad hoc solutions and experimental installations, are the ingredients of Barra Project International Srl which makes available to the market its products, designed to provide the right support at every stage of your production chain: a more efficient production plant is safer and less expensive to manage. Barra Project International does not sell products, it provides solutions!
1 ECOFOG System
b. ECOFOG® facilitates the movement of highly volatile materials: with a constant nebulization ECOFOG® manages to weigh down the particles on the material thus reducing their dispersion.
3. RASKIA® - cleaners for rubber conveyor belts Simple, robust and space-saving cleaners. Thanks to modular sector scraping blades and elastomer shock absorbers, continuous
RASKIA Belt Cleaner
OCTOBER 2020..............................................................
Plastics
Plastics
& Rubber
55
EXHIBITIONS
interplastica from 26 to 29 January 2021 in Moscow sends important signal in difficult times interplastica 2021, the International Trade Fair for Plastics and Rubber, will be held again at the AO Expocentre in Krasnaja Presnja
T
he Covid-19 pandemic currently faces businesses around the globe with very special challenges. Like the international trade fair business. Trade fairs have been cancelled worldwide but the industry is not at a standstill. After all, trade fairs are urgently needed for restarting the economy as a whole. They are indispensable experience and communication platforms for entire sectors of industry where contacts can be established, experiences exchanged, knowledge gathered and innovations appraised live. interplastica 2021, the International Trade Fair for Plastics and Rubber, will be held again at the AO Expocentre in Krasnaja Presnja in Moscow from 26 to 29 January 2021. To guarantee the highest degree of safety for exhibitors, visitors, partners and employees, Messe Düsseldorf Moscow is currently developing a comprehensive hygiene and infection protection concept in close coordination with the operator of the exhibition centre and in compliance with the hygiene regulations in force in that country to be employed at interplastica.
56
Plastics
Exhibitors’ brisk demand confirms that companies in the plastics and rubber industries welcome the opportunity to gain exposure on such a relevant market especially during such difficult times. Alongside machinery, raw materials and equipment the focus will again be on the circular economy and recycling themes in the coming year. The Recycling Solutions segment featuring highly specialised enterprises was received very well at its debut during the previous interplastica and will also be continued in 2021 with accompanying discussion forums revolving around waste management and circular economy. Beyond this, innovative technologies for all sectors of plastics processing will be showcased not only at the exhibitors’ stands but also addressed in the lectures and discussions at the Polymer Plaza and as part of the special show 3D fab+print Russia. Experts here will again pick up on current developments and additive manufacturing possibilities in technical talks and demonstrations. Held concurrently with interplastica will be upakovka 2021, the No. 1 Trade Fair in Russia for Processing and Packaging. At upakovka innovative packaging machines as well as technologies and materials for manufacturing packaging materials
& Rubber
and media will be exhibited thereby generating a wealth of synergies for the visitors of interplastica. Interested companies can still register direct at www.interplastica. de or contact Ms Caroline Erben for further details at: ErbenC@messeduesseldorf.de. interplastica forms part of the Global Gate brand, under which Messe Düsseldorf pools its global activities for the plastics and rubber industry. Comprising a total of ten events, this product portfolio leverages the expertise and experience gained by organising the world’s No. 1 ‘K’ fair in Düsseldorf and by developing successful regional events. The ten trade fairs in total are professional communication platforms serving as door openers for promising growth markets such as central and Eastern Europe, the Middle East, North Africa, China, India and South East Asia. Complete information can be found at www.k-globalgate.com
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
BFM, high quality with stack BFM has been in the plastic machinery sector for more than forty five years and acknowledged as one of the leading companies in the construction of automatic winders and flexo printing machines
B
FM has been present in the field of plastic machinery for over forty five years and today is acknowledged as one of the leading companies in the “Made in Italy” for the construction of “Take off & Automatic Winders” to suit extrusion blown film lines (BFM is partner of Luigi Bandera Spa), and “Flexo printing machines”, Central Drum up to 10 colors and Stack Type 2-4-6-8 colours. At the next Drupa 2021, which will be held in Düsseldorf in April, BFM will be pleased to propose a novelty in its range of stack type flexographic printing machines: Sirio 6/8 Colour S Plus. Sirio Model Printer It is a 6/8 colour “stack type” machine, designed for printing on various plastic materials for the packaging market but also suitable for paper materials, in line with the extruder or reel to reel. The printing units are equipped with a closed chamber doctor blade with the possibility of self-alignment, it is able to print from a minimum repeat length of 350 mm up to a maximum of 1200 mm, with printing widths up to 1800 mm. The line is composed of an unwinder with different solutions: fixed, shaftless or revolver, 6/8 colours printing group with motorized counterprinting axis, electric grinding, and pneumatic inking. The drying group
58
Plastics
is composed of an intercolour system and a drying box with electric or by gas heating and a winder normally different winding possibilities. The maximum production speed is 250 meters per minute. The automation platform of this machine has been designed using the proven application experience of Bosch Rexoth, industry leader in the automation of printing and converting machines
& Rubber
This printer is the “right compromise” between costs and performance: in this case the use of IndraDyn MBT torque motors, which move the colour group composed of counterroller-cliché-anilox, guarantees great dimensional compactness and the right printing precision. The use of the IndraDrive M digital series guarantees constant position synchronism between the different printing elements, with consequent
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
register maintenance both at high speeds and during acceleration and deceleration. Initial registration is very quick and can also be done when the machine is stopped, significantly reducing energy waste and material waste. Today, to complete the Sirio stack lines, it is born the “Sirio S-Plus”, even more flexible through the adoption of a full electronic positioning system, each colour group can be moved longitudinally in a completely independent way thanks to the adoption of Indradrive Cs servo axes and MSM motors equipped with absolute multiturn encoder: the results are a most accurate set point, the management of storable recipes, the reduced reconfiguration times. Among the novelties of S-Plus the new graphic interface, designed on 21”, simple and intuitive but at the same time complete for the management of all machine functions. Let’s meet in Hall 16 – Booth B 74! BFM will show you all its improvements.
OCTOBER 2020..............................................................
Plastics
Plastics
& Rubber
59
WORLD OF PLASTICS & RUBBER
Tovo Gomma, ensuring production continuity The strengths characterizing Tovo Gomma are the completeness of the range of solutions available, the ability to design and fine-tune products for specific applications, production flexibility and efficiency in all process phases
T
ovo Gomma SpA, characterized by a solid and stable corporate structure with a family character, has been operating in the elastomers sector since 1973 and is specialized in the design and production of rubber compounds, vulcanized sheets and foam for the most varied industrial sectors, from automotive to food, from petrochemicals to construction, in Europe and in the world. The productions of Tovo Gomma are divided into three sectors: black and coloured compounds based on the following elastomers: NBR, SBR, EPM / EPDM, CR, NR, IR, IIR, B / CIIR, BR, CSM and HNBR; vulcanized sheets, black and coloured, produced not only with the here above mentioned elastomers but also with FKM and VMQ; foam products, based on EPDM, CR, PE and PVC, supplied in sheets, rolls and profiles (with or without self-adhesive).
60
Plastics
The mixing plants are completely controlled by PLC, the dosages take place automatically on dedicated plants and the materials are managed to guarantee their traceability. The mixing and dosing lines of the small ingredients are duplicated and redundant, in order to ensure production continuity in all circumstances. For the production of sheets, Tovo Gomma has systems for continuous vulcanization and machines for compression moulding. Tovo Gomma is able to supply filtered compounds in continuous strips. Each compound is checked according to a specific control plan, weighed and adequately stored in warehouse waiting to be shipped, when necessary also in a special airconditioned room. The strengths that characterize Tovo Gomma are the completeness of the range of solutions available, the ability to design and fine-tune
& Rubber
products for specific applications, production flexibility and efficiency in all process phases. Tovo Gomma staff, led by a qualified and experienced managerial structure, has a technological laboratory with the most recent and complete equipment for the development and quality control of compounds and sheets according to the most varied customers’ requirements and for the study and introduction of new raw materials. Tovo Gomma bases its actions on the centrality of the human being, the enhancement of work in safety as a tool for personal growth and progress of the society, the development of the principles of individual responsibility and competence and sustainable development for the protection of the environment. The company is ISO 9001: 2015 certified and has adopted an Organizational Model in compliance with Legislative Decree D. Lgs. 231/01.
..............................................................OCTOBER 2020
EXHIBITIONS
PLASTPOL - a recipe for success in business
From 6 to 8 October Targi Kielce offered an abundance of the latest technologies in plastics and rubber processing and converting. One hundred fortyseven companies from 12 countries marked their presence at this year’s PLASTPOL
62
Plastics
A
lthough the exhibition was slightly less impressive than those in previous years, the event still fulfilled its essential function. Plastpol proved to be an effective business platform - the exhibitors have confirmed that the project was justified and in great demand: “We are here first and foremost to show that the company is alive in these difficult times and not afraid to exhibit its products. Targi Kielce seems to have done everything to protect us epidemiology-wise the surveys, decontamination gates area available. The expo centre has done everything in its power. We are to showcase here because I think that without face-to-face business meetings, every industry will perish. There is no chance for other sectors to survive without meetings. Experience exchange, opportunities to show new technologies are a must. Not everything can be shown on the Internet”, said Sławomir Malenta, Euro SITEX Polska.
& Rubber
Traditionally, the production processes were demonstrated live during the expo, modern processing and converting machines and technological solutions also came in abundance. The companies presented, inter alia: - a BOY 25E single-component injection moulding machine with the latest Procan ALPHA 4 system with a servo-drive and an integrated robot, built into a safety cage, - injection unit for the 2nd component BOY 2C XS. The unit connecting via EUROMAP standard interface. You can create a multi-component injection moulding machine from the injection moulding machine we already have; the unit is equipped with its own external control, - HIT - BOY 35E injection moulding machine equipped with the newest Procan ALPHA 4 control system very intuitive, useful and loved by all customers. This application makes the use of a picker built-in inside the safety cage for picking up ingots. Finished details are segregated, - EURO CHILLER cooling system from the GCA series. One of the smaller
..............................................................OCTOBER 2020
EXHIBITIONS
units used in the plastics processing, - servo-hydraulic injection moulding machine BOLE C460, 140 tons clamping force (sold during the PLASTPOL fair). This is the first Chinese construction of this machine with which linear bearings are used, which significantly reduce the resistance to movement of the mould and contribute to its better protection, - Cartesian robot, the smallest robot from TMA Automation. The robot uses micropalletisation technology, i.e. the robot picks up a detail and puts it back in a programmed manner. The robot on show offers up to 3 kg load capacity. The PLASTPOL expo was used by the company as the showcase for programming three-axis movements concept in such a way that the robot would be able to repeat certain sequences, - Japanese SCHIMADZU strength testing machine - Autograph AGX-V. The device is primarily used for
strength tests of various materials tensile, compression and basic tests according to European, American and global standards. The machine offers a modern design. These are only some of the innovations the visitors could see at the recent edition of PLASTPOL. The plastics festival at Targi Kielce is a must-see for many companies whose business profile is associated with the plastics industry. “We have been a part of Plastpol for 7 years. This is the main trade show we join. We offer our ultrasonic welding devices. This year we have come with our latest development, i.e. two lines for the surgical and protective masks production. I hope that we will be able to attract new customers this year, even though we are in such a difficult situation now “, claims Marcin Kiełbasiński Łukasiewicz Research Institute, Tele and Radio Research Institute. The BioPlastics zone was a novelty of
OCTOBER 2020..............................................................
the 24th International Fair of Plastics and Rubber Processing PLASTPOL which featured biodegradable, compostable and bio-based products. The expo stand zone attracted the participants’ attention because of its wide range of products complemented with consulting, research and certification services. Raw materials, components, additives for bioplastics processing, machines and devices dedicated to the bioplastics sector, media, associations, and industry organisations also marked their presence in this zone. The knowledge-packed meetings were a strong accent of the PLASTPOL; the Polish Union of Plastics Converters together with PlasticsEurope Polska organised producers, processors and recyclers meeting in online version. The PLASTECH – INFO Technical Seminar was also a part of the show, the seminar held on the second day
Plastics
& Rubber
63
EXHIBITIONS
of the trade show, i.e. 7 October - this year’s event’s the motto, and the main focus is “plastics as environment and human life friendly materials”. The seminar thematic scope mainly referred to the unfair negative image of plastics. The session objective was to pay attention to the fully responsible and rational use possibilities in the context of existing environmental requirements. Conscious resource management through the appropriate materials, technologies selection and process optimisation, is one of the highlights of the seminar. One hundred forty-seven companies from 12 countries (Austria, Czech Republic, Denmark, the Netherlands, Lithuania, Germany, Poland, Serbia, Slovenia, Switzerland, Ukraine, and Italy) participated in this year edition of PLASTPOL. The 25th PLASTPOL is to be held from 25 to 28 May, 2021.
64
Plastics
& Rubber
..............................................................OCTOBER 2020
EXHIBITIONS
drupa preview: New digital platform for knowledge transfer, networking and presentation drupa extends its digital offering: starting in October the online platform drupa preview will offer exhibitors and visitors an additional channel for touching base with the sector, discussing trending themes and presenting product portfolios. The portal will consist of the content formats “Conference”, “Exhibition” as well as “Networking” and will bring the community together
T
he drupa preview thus enables continuous exchange of information until the hybrid trade fair in April 2021, which will combine the on-site event with additional digital content. In the “Conference Area” users will find lectures, videos and interviews – providing a preview of drupa 2021. It will reflect the agenda in terms of content and the knowledge transfer that drupa stands for. On fixed days and times interested parties can take part in the web sessions free of charge and chat with the speakers. Afterwards the videos will be available on demand. The “Exhibition Space” brings together what visitors can expect to normally see in the exhibition areas – exciting products, innovative companies and expert input. This means visits to the live event can already be planned at this early stage. In addition, even meetings can already be set up: at the “Networking Plaza”. The networking options allow companies and interested parties to establish live online contact in advance and intensify this contact at the event in April 2021. Thanks to the new digital offering, drupa provides the sector with continuous exchange and knowledge transfer and meaningfully bridges the remaining time until drupa for both visitors and exhibitors. “We have already been working long and hard on enhancing our digital offering. The
66
Plastics
& Rubber
..............................................................OCTOBER 2020
EXHIBITIONS
to take part in the industry gettogether. At the same time, we meet exhibitors’ needs to reach the international community personally. Via the portal the drupa platform therefore unites the global print community in a targeted manner.” The content of
drupa preview is free of charge for visitors. After registration content and videos can be accessed at any time. For web sessions, live lectures and Matchmaking there will be a separate (free) registration for a specific day and time. The agenda of live sessions will follow soon.
Messe Düsseldorf GmbH
pandemic has faced us with new challenges and has ultimately been a catalyst for digitization,” says Sabine Geldermann, Director drupa and Print Technologies, and adds: “With the hybrid drupa we also give those visitors who are unable to travel the possibility
OCTOBER 2020..............................................................
Plastics
Plastics
& Rubber
67
WORLD OF PLASTICS & RUBBER
Extensive experience and know-how Tecno System boasts extensive experience of design and construction of highquality extrusion lines that feature cuttingedge technology for full customer’s satisfaction
T
ecno System Srl has been offering its customers a high level of experience and know-how since 1957. It is one of the most important Italian producers concerning complete extrusion lines that meet most of the needs such as lines with different capacity (5 – 350 kg/h) and for a vast range of purposes in the field of extrusion of profiles (pipes, technical profiles, building profiles, medical tubes, thermal break profiles with
glass fiber, etc.) as well as tubes made of all kinds of thermoplastic materials such as PVC (soft and rigid), PP, PE, TPE, EVA, PU, PA, PPR with glass fiber (GF). One of the most important businesses is the construction of dedicated extrusion lines for medical tubing made in PVC, TPU, PEBAX, etc., used in clean room environments. The experience in PVC profile extrusion is very solid as well as design and construction of high-quality extrusion dyes and calibrators for the extrusion of profiles for PVC window frames, roller shutters, panels, cable management ducts, gutters and rainwater pipes, etc., under the well-known brand B-TEC, property of Tecno System. In addition, the extruders produced under the renowned brand TPV Mechanical Division, have low energy consumption, energy saving units in the extrusion lines and innovative cutting units with radial hot blades. These skills give, as a result, a high level of customer satisfaction, quality achieved by the final product, together with the renowned strength and durability of the tooling. As well as constructing extrusion lines and tools, Tecno System has also the ability to provide in-the-
house technologies for mechanical processing of profiles, customer tailored solutions and turnkey systems, which represent a huge advantage. Great experience in the punching system ambit has allowed Tecno System to develop integrated solutions for extrusion lines, strategic corporate market policy. Tecno System is getting stronger and becoming a leader in innovative spiral hoses extrusion lines - 4.0 ready - composed by two extruders, one for U-PVC and one for the soft grade PVC. This highly advanced technology extrusion line includes different strong points such as continuous marking of the tubes before they becomes spirals, fully automated cutting system, automatic tube ejection system, other than the fact that no operator is needed on the line during process. Another flagship product is, without any doubts, the multilayer pipe extrusion lines - 4.0 ready –3 layers or 5 layers, complete with OD control, inkjet printer, and a final coiler. An example is the multilayer process with glass fiber that improves the material properties such as dimensional stability, traction, compression and bending. It consists of PPR inner and outer layers and a special mixture of Glass Fiber (GF) PP middle layer, which allow to minimize elongation from heat and reinforces the structure.
Energy Saving
Extruders and extrusion lines
68
Plastics
& Rubber
..............................................................OCTOBER 2020
EXHIBITIONS
Interview with the President of Equiplast, the International Plastics and Rubber Event Bernd Roegele: “Equiplast will highlight the importance of a sector that the pandemic has revealed to be vital”
70
Plastics
& Rubber
T
he situation caused by COVID-19 has resulted in Fira de Barcelona deciding to postpone holding Equiplast, the International Plastics and Rubber Event, initially scheduled for June and later for December this year until September 2021. In this interview, the President of Equiplast, Bernd Roegele, explains the latest organisational developments regarding the event, which will take place from 14th to 18th September 2021 at Fira de Barcelona’s Gran Via venue, together with Expoquimia and Eurosurfas. Question: The first, and unavoidable question. Why is Equiplast moving to September 2021? Answer: The outbreak of coronavirus and COVID-19 have made an impact across the globe in a way that has never been seen before. And in our case, in addition to the restrictions imposed by the authorities, the health of workers, exhibitors, visitors and suppliers have prevailed in making the decision to move the fair to the end of the year. This decision was made with the majority support of the main sectoral agents as was the case when we decided to organise it in June and then postpone it until December. However, circumstances have forced us to make a new change to the dates as well as a new model. In this regard, how is the Equiplast, the International Plastics and Rubber Event being planned? Every three years, the organisers of the three events take on the challenge of designing and organising a trade fair event that will surprise everyone, as well as being a great business opportunity for all the professionals in the sector. In this regard, and given the current situation, this challenge has multiplied and that’s why we are working on a hybrid design, in which 80% of the fair’s offers are at the physical event and 20% are online,
..............................................................OCTOBER 2020
EXHIBITIONS
with the aim of offering events that will be attractive and useful for all the professionals in the sectors represented. In addition, and in line with this, at Fira de Barcelona, we are working to increase the level of safety at our exhibition venues to be able to carry out our trade fairs with the maximum guarantees in place through the implementation of a strict protocol which, in collaboration with the risk management consultant specialist, Aon, and epidemiological advice from the Hospital Clínic in Barcelona, we establish a series of measures to prevent contagion. Will Equiplast 2021 be very different from the 2017 event? Since the 1960s, the three fairs have been shaping the largest applied chemistry trade fair in our country and the second largest in the European Union. In this regard, we wanted to continue working shoulder to shoulder with the three sectors to be able to organise events which, despite everything that’s going on, can respond to their concerns and needs. At Equiplast, we will highlight the importance of a sector that has been vilified and one the pandemic has revealed as vital to our health and well-being. In this regard, the fair will include a recycling plant in operation to demonstrate the sector’s commitment to the environment.
72
Plastics
Similarly, we have announced the first edition of the Equiplast - Shaping the Future Awards, which will reward projects or products made from recycled plastic or other sustainable materials. And finally, the fair will present a unique exhibition of products made from 100% recycled plastic from renewable and biodegradable sources. How have you let exhibitors and visitors know about the new Equiplast event? The most recent action which has helped us to check the interest which can be stirred up by the online contents has been the first session of the Unprecedented Industrial Dialogues, a series of webinars which we organised during the first week of June, the dates on which we should have been holding the three fairs. We have been very satisfied with the response we have received to a programme which has dealt with issues such as digitalisation, the circular economy and technology transfer, the core themes which the theoretical contents of the three fairs
& Rubber
will be based on. The Unprecedented Industrial Dialogues will continue until the events are held with the aim of continuing to generate theoreticalscientific debate. Finally, in the international arena, we have designed an International VIP Buyers Programme, focusing on the most accessible foreign markets such as North Africa and Latin America, which has allowed us to secure the presence of various reverse trade missions. And now, we are obliged to continue working to make all the sectoral agents aware of the new date change. Finally, as President of Equiplast, what type of fair would you say we can expect next year? I’d like to call on everyone to see the fair as a window of opportunity and as a driving force for the economic revival of the sector which it represents in an event which will have all the safety measures in place. I’m convinced that we will meet the needs of an industry that is fundamental to our economy once again.
..............................................................OCTOBER 2020
EXHIBITIONS
automatica 2020 not to be held as in-person event, new format for 2021 “This situation makes it all the more important to look ahead now. We are working hard on new offerings to bring the industry together and move it forward”
T
In March, Messe München decided to move the exhibition date from June to December in agreement with the VDMA Robotics + Automation Association. Messe München had done everything it could to ensure a safe in-person exhibition by postponing the event to the latest possible date of the year and drawing up a comprehensive protection and hygiene protocol. However, current developments make it absolutely necessary to rethink these plans. Due to the increasing number of infections, travel restrictions have been imposed for an increasing number of European countries and regions in recent weeks. Similarly, the travel situation outside Europe has barely improved. In addition, many German and international
Messe München GmbH
he automatica exhibition scheduled for December 8–11, 2020 will not take place due to the current travel restrictions in Europe in connection with the coronavirus pandemic, which are becoming more stringent. This decision has been taken by Messe München in agreement and close coordination with the conceptual sponsor VDMA Robotics + Automation and the automatica Advisory Board. In coordination with the industry, Messe München is now developing a compact new in-person event for mid-2021, which will be adapted to the specific circumstances in times of the coronavirus. In addition, automatica is further expanding its digital offering.
corporations have issued internal travel bans. As a result, most exhibitors fear that only a small fraction of the visitors originally expected will attend. For this reason, they no longer consider participating in automatica 2020. Under these circumstances, which are unlikely to improve, automatica 2020 is unable to perform its task of bringing together supply and demand. Holding automatica this December would cause lasting damage to the exhibition in the long run. Falk Senger, Managing Director Messe München, on the decision: “An exhibition thrives on its participants. However, too many of our exhibitors and visitors could not have come to Munich due to travel restrictions. That is why we ultimately had to cancel automatica 2020. This situation makes it all the more important to look ahead now. We are working hard on new offerings to bring the industry together and move it forward.” “The original decision to postpone automatica was correct. However,
74
Plastics
& Rubber
..............................................................OCTOBER 2020
EXHIBITIONS
with external conditions having deteriorated sharply recently, a reassessment of the situation is essential. We are glad that Messe München has reacted flexibly and is now breaking new ground together with the industry”, confirmed Patrick Schwarzkopf, Managing Director of VDMA Robotics + Automation. New exhibition format for summer 2021 under development The industry’s need for personal contact, exchange and presentation opportunities is stronger than ever. This is why Messe München is now working with exhibitors to develop a new inperson event with digital elements, adapted to the circumstances in times of the coronavirus. The new event has been conceived as a compact ‘exhibition before the exhibition’ for early summer 2021 and is to become an add-on to automatica. Detailed information on this will follow shortly. “We upheld automatica until the end. But the current infection rate developments make hosting a successful world-leading exhibition impossible and would have damaged its aspiration and image.
That is why we will now focus our planning efforts on a new event next summer to bridge the time gap to automatica 2022—thus providing the necessary positive momentum for the industry,” says Wilfried Eberhardt, Chairman of the automatica Advisory Board and Chief Marketing Officer of KUKA AG. Expansion of digital offering Above and beyond that, automatica is expanding its digital offering, thus providing additional exchange opportunities and
OCTOBER 2020..............................................................
orientational knowledge. In the new online event series “Let’s talk by automatica”, for example, topclass experts, suppliers and users regularly take a closer look at current issues and trends in robotics and automation. In addition, there are plans such as offering essential parts of the supporting program, which was originally planned for the December exhibition, in a virtual setting. The International Symposium on Robotics (ISR) would be a good example for this. Details will follow in the coming weeks.
Plastics
Plastics
& Rubber
75
WORLD OF PLASTICS & RUBBER
Nestlé joins U.S. Plastics Pact, committing to meet ambitious circular economy goals by 2025 Led by The Recycling Partnership and World Wildlife Fund in partnership with the Ellen MacArthur Foundation, the U.S. Plastics Pact will unify approaches to rethink the way we design, use, and reuse plastics
N
estlé has joined the U.S. Plastics Pact, a collaborative, solutionsdriven initiative bringing together industry and social organizations to drive significant systemic change by unifying diverse cross-sector approaches, setting a national strategy, and creating scalable solutions to create a path forward toward a circular economy for plastics in the United States by 2025. The first North American Pact of its kind, the U.S. Pact is a collaboration led by The Recycling Partnership, World Wildlife Fund (WWF), and Ellen MacArthur Foundation. As part of the U.S. Pact, activators like Nestlé recognize that significant, system wide change is imperative to realize a circular economy for plastics. As such, the U.S. Pact will convene more than 60 brands, retailers, NGOs, and government agencies across the plastics value chain to bring one voice to U.S. packaging through coordinated initiatives and innovative solutions for rethinking products, packaging, and business models.
Led by The Recycling Partnership and World Wildlife Fund in partnership with the Ellen MacArthur Foundation, the U.S. Plastics Pact will unify approaches to rethink the way we design, use, and reuse plastics
76
Plastics
& Rubber
“Our vision at Nestlé is that none of our packaging, including plastics, ends up in a landfill or as litter,” said Nicole Collier, Director of Government Affairs at Nestlé and recently appointed member of The Recycling Partnership’s Board of Directors. “The U.S. Plastics Pact’s ambitious goals align with that vision, and the coordinated approach complements our ongoing efforts to pioneer alternative packaging materials, support increased investments in recycling infrastructure, and drive recycling behavior in pursuit of a circular economy.” As a founding activator of the U.S. Plastics Pact, Nestlé has agreed to collectively make efforts towards these four ambitious goals: 1. Define a list of packaging to be designated as problematic or unnecessary by 2021 and take measures to eliminate them by 2025. 2. By 2025, all plastic packaging is 100% reusable, recyclable, or compostable. 3. By 2025, undertake ambitious actions to effectively recycle or compost 50% of plastic packaging. 4. By 2025, the average recycled content or responsibly sourced biobased content in plastic packaging will be 30%. While the U.S. Pact follows the ambitious precedents set by the existing global network of Plastic Pacts, it will be tailored to meet the unique needs and challenges of the U.S. market. The Pact will reflect national priorities and realities, while still propelling the nation closer to other developed nations in its management of plastic waste. “Together through the U.S. Plastics Pact, we will ignite system change to accelerate progress toward a circular economy,” says Sarah Dearman, Vice President of Circular Ventures for The Recycling Partnership. “The U.S. Pact will accelerate system wide change by inspiring and supporting upstream innovation through a coordinated national strategy, creating a unified framework and enabling members to accelerate
..............................................................OCTOBER 2020
WORLD OF PLASTICS & RUBBER
progress toward our ambitious 2025 sustainability goals. Members’ full participation will be vital to reaching our shared goals.” Achieving this vision will require new levels of accountability from all facets of the plastics supply chain. The U.S. Pact emphasizes measurable change and as such, Nestlé is committed to transparent, annual reporting, guided by WWF’s ReSource: Plastic Footprint Tracker, which will be used to document annual progress against our four goals. The first task of the founding members of the U.S. Plastics Pact will be to establish a “roadmap” in Q1 2021 to identify key milestones and national solutions to achieving the U.S. targets and realize a circular economy in which plastic never becomes waste. Since early 2018 when Nestlé announced its ambition to make 100% of its packaging reusable or recyclable by 2025, the company has accelerated work to eliminate hardto-recycle materials in accordance with its Rules of Sustainable Packaging. The company also seeks to reduce its use of virgin plastic by one third by 2025. In January 2020, Nestlé announced an investment of up to CHF 2 billion to lead the shift from virgin plastics to food-grade recycled plastics and to accelerate the development of innovative sustainable packaging solutions. With this investment, Nestlé is working to create a market for food-grade recycled plastics, which does not
currently exist on an industrial level for plastics other than PET. Nestlé’s ability to achieve 100% reusable or recyclable packaging partially relies on helping upgrade underfunded and often outdated recycling infrastructure in the U.S. Efforts already underway in this pursuit include the company’s investment in the Materials Recovery for the Future Collaborative which demonstrated the successful collection, separation and preparation for recycling of flexible plastic packaging in a curbside recycling program pilot. Nestlé continues to work on scaling up solutions for recycling flexible plastic by participating in The Recycling Partnership’s Film and Flexibles Task Force. Additionally, in 2017 Nestlé Waters North America began a multi-year $6 million investment in the Closed Loop Infrastructure Fund to support projects that help increase recycling capabilities throughout the country. Nestlé has added the How2Recycle® label to the majority of its U.S. packaging portfolio, providing clear and concise information to make accurate recycling easier. Nestlé in the U.S. (NiM) Nestlé in the United States is committed to enhancing quality of life and contributing to a healthier future for individuals and families, for our thriving and resilient communities, and for the planet. We are transforming our product portfolio by focusing on high-growth categories, including pet care, bottled water, coffee, consumer health and infant nutrition,
OCTOBER 2020..............................................................
and offering brands people love. With approximately 36,000 employees across 34 states, Nestlé in the U.S. offers a wide portfolio of food and beverage products for people and their pets throughout their lives. Nestlé in the U.S. consists of seven main businesses: Nestlé USA, Nestlé Waters North America, Nestlé Nutrition, Nestlé Professional, Nespresso, Nestlé Health Science, and Nestlé Purina PetCare Company. The United States is Nestlé S.A.’s largest market with combined product sales in the United States of $29 billion. About The Recycling Partnership The Recycling Partnership is a national nonprofit organization that leverages corporate partner funding to transform recycling for good in states, cities, and communities nationwide. As the leading organization in the country that engages the full recycling supply chain from the corporations that manufacture products and packaging to local governments charged with recycling to industry end markets, haulers, material recovery facilities, and converters, The Recycling Partnership positively impacts recycling at every step in the process. Since 2014, the nonprofit change agent diverted 230 million pounds of new recyclables from landfills, saved 465 million gallons of water, avoided more than 250,000 metric tons of greenhouse gases, and drove significant reductions in targeted contamination rates. Learn more at www.recyclingpartnership.org.
Plastics
& Plastics & Rubber
77
exhibitions 2020 PLASTPOL (Kielce, Poland) – 6-8 October 2020 – www.targikielce.pl PLASTIC EXPO (Osaka, Japan) – 7-9 October 2020 – www.plas.jp/en-gb.html FAKUMA VIRTUAL (Germany) – October 2020 – www.fakuma-messe.de PLASTIC EXPO (Tokyo, Japan) – 2-4 December 2020 – www.plas.jp/en-gb.html
2021 INTERPLASTICA (Moscow, Russia) – 26-29 January 2021 – www.interplastica.de INTERPACK (Düsseldorf, Germany) – 23 February – March 2021 – www.interpack.com CHINAPLAS (Shenzhen, China) – 13-16 April 2021 – www.chinaplasonline.com DRUPA (Düsseldorf, Germany) – 20-28 April 2021 – www.drupa.com PLAST (Milan, Italy) – 4-7 May 2021 – www.plastonline.org EXPOPLAST (S. Miguel, Peru) – 1-4 June 2021 – www.expoplastperu.com TIRE TECHNOLOGY (Hannover, Germany) – 8-10 June 2021 – www.tiretechnology-expo.com ROSPLAST e ROSMOULD (Moscow, Russia) – 15-17 June 2021 – www.rosplast-expo.com PLASTIC EXPO (Osaka, Japan) – 23-25 June, 2021 – www.plas.jp/en-gb.html INTERPLAS (Birmingham, UK) – 29 June – 1 July 2021 – www.interplasuk.com MECSPE (Parma, Italy) – June 2021 – www.mecspe.com PLASTASIA (Bangalore, India) – 2-5 July 2021 – www.plastasia.in ARGENPLAS (Buenos Aires, Argentina) – 26-29 July 2021 – www.argenplas.com.ar EQUIPLAST (Barcelona, Spain) – 14-18 September 2021 – www.equiplast.com RUBBER TEC CHINA (Shanghai, China) – 15-17 September 2021 – en.rubbertech-expo.com FAKUMA (Friedrichshafen, Germany) – 12-16 October 2021 – www.fakuma-messe.de ARAB PLAST (Dubai, UAE) – 15-18 November 2021 – www.arabplast.info PLASTIC & RUBBER INDONESIA (Jakarta, Indonesia) – 17-20 November 2021 – www.plasticsandrubberindonesia.com GULF PRINT & PACK (Dubai, UAE) – 14-16 December 2021 – www.gulfprintpack.com INTERPLAST (Joinville, Brazil) – 5-8 April 2022 – www.interplast.com.br PLASTEX (Brno, Czech Republic) – 3-7 October 2022 – www.bvv.cz/en/plastex
index AMUT SPA www.amutgroup.com
10-11
AUTOMA BY MAGIC SRL www.automabymagic.it
1, 20-21
AUTOMATICA www.automatica-munich.com
74-75
AZ GOMMA SRL www.azgomma.it
III^ Cover, 15
BARRA PROJECT INTERNATIONAL SRL www.barraproject.com
53-55
BFM SRL www.bfm.it
57-59
BINOVA SRL www.binovapm.it
43-45
BRUNO FOLCIERI SRL www.brunofolcieri.it
51
CHINAPLAS 2021 www.chinaplasonline.com
6-8, 18
DRUPA 2021 www.drupa.com
46, 66-67
EPF ELETTROTECNICA SRL www.epf.it
19
EQUIPLAST 2020 www.equiplast.com
70, 72
FAKUMA 2020-2021 www.fakuma-messe.com
12,14, 24-25
FILTEC SRL www.filtec.it
35-37
FIMIC SRL www.fimic.it
28-29
GIMAT SRL www.gimat.bo.it
71
GIMATIC SRL www.gimatic.com
22-23
GVF IMPIANTI SRL www.gvfimpianti.it
30-32
IMG SRL www.imgmacchine.it
73
INTERPACK 2021 www.interpack.com
52
INTERPLASTICA 2021 www.interplastica.de
56
MIOZZO SRL www.miozzosrl.com
2, 26-27
MONTELLO SPA www.montello-spa.it
II^ Cover, 33
NESTLE S.A. www.nestle.com
76-77
NOL-TEC EUROPE SRL www.nte-process.com
47-49
PEGASO INDUSTRIES SPA www.pegasoindustries.com
9
PLAS MEC SRL www.plasmec.it
13
PLAST 2021 www.plastonline.org
34
PLASTICS & RUBBER INDONESIA 2020 www.plasticsandrubberindonesia.com
80
PLASTPOL 2020 www.targikielce.pl/en/plastpol
62-64
PRESMA SPA www.presma.it
IV^ Cover, 16-17
R+W ITALIA SRL www.rw-italia.it
65
SMI SPA www.smigroup.it
38-41
TECMES SRL www.tecmes-italia.com
3
TECNO SYSTEM SRL www.tecnosystemfe.it
68-69
TOVO GOMMA SPA www.tovogomma.com
60-61
UPAKOVKA 2021 www.upakovka-tradefair.com
42
Plastics & Rubber
Technology in technopolimeric material Mould and mould-flow design for thermoplastic articles Mould design for elastomeric articles Print of technical details in thermoplastic materials Print of elastomeric technical details Ultrasound soldering – high frequency – hot blade Quality service: analysis on technical articles produces and test of in/outcoming materials
FIELDS OF APPLICATION OF OUR PRODUCTS BOTTLING PACKAGING AUTOMATION LABELLING PAPER TRANSFORMATION PHARMACEUTICAL VALVES AND FITTINGS PNEUMATICS