INTERNATIONAL MAGAZINES
.it
ITALIAN TECHNOLOGY FOR THE
BEVERAGE INDUSTRY
ASIATIC EDITION 2017/2018
Supplemento a TecnAlimentaria N°11 Novembre 2017 Poste Italiane SpA Spedizione in Abbonamento Postale D.L. 353/2003 (conv. in L. 27/02/2004 n. 46) art. 1 comma 1 NE/TV - Anno 22 N°11 - 2017 - ISSN 2498-9541
INTERNATIONAL MAGAZINES
INTERNATIONAL
.it
TecnAlimentaria Supplement N. 11 November 2017 Year XXII Publisher: F. Da Cortà Fumei
.it
MAGAZINES
HNOLOG ITALIAN TEC
Editorial Staff: Sabrina Fattoretto
Y FOR THE
DUSTRY
BEVERAGE IN
Management, Editorial Office: Editrice EDF Trend srl Corso Del Popolo, 42 31100 Treviso - ITALY Tel. + 39 0422 549 305 Fax + 39 0422 591 736 info@tecnalimentaria.it redazione@tecnalimentaria.it www.tecnalimentaria.it
ION ASIATIC ED2IT 017/2018
Design: Claudia Bosco Cooperators: Anita Pozzi Elena Abbondanza Franco Giordano Photolito & Printing: L’Artegrafica
22 a 1 NE/TV - Anno Italiane SpA bre 2017 Poste n. 46) art. 1 comm aria N°11 Novem 003 (conv. in L. 27/02/2004 a TecnAliment Supplemento Postale D.L. 353/2 Abbonamento Spedizione in
N°11 - 2017 -
Autorizzazione Tribunale di Forlì n. 5 del 19.01.1996 In questo numero la pubblicità non supera il 45% Poste Italiane SpA - Spedizione in Abbonamento Postale - D.L. 353/2003 (conv. in L. 27/02/2004 n. 46) art. 1 comma 1 NE/TV ISSN 2498-9541
ISSN 2498-9541
Publisher: Editrice EDF Trend srl Corso del Popolo, 42 31100 Treviso - Italy
Do you want to know the leading producers of cutting-edge beverage technology? Browse through our magazines on our website!
INTERNATIONAL MAGAZINES
.it
www.tecnalimentaria.it
ITALIAN TECHNOLOGY FOR THE BEVERAGE INDUSTRY
N°11 Novembre / November 2017
MEMBER OF:
ITALIAN TECHNOLOGY FOR THE BEVERAGE INDUSTRY 2017
INTERNATIONAL MAGAZINES
Supplemento a TecnAlimentaria N°2 Febbraio 2017 Poste Italiane SpA - Spedizione in Abbonamento Postale D.L. 353/2003 (conv. in L. 27/02/2004 n. 46) art. 1 comma 1 NE/TV - Anno 22 N°2-2017 - ISSN 2498-9541
Supplemento a TecnAlimentaria N°8-9 Agosto-Settembre 2017 Poste Italiane SpA - Spedizione in Abbonamento Postale D.L. 353/2003 (conv. in L. 27/02/2004 n. 46) art. 1 comma 1 NE/TV Anno 22 N°8/9 - 2017 - ISSN 2498-9541
Informativa ex D.lgs 196/03 Ai sensi dell’art.2 comma 2° del Codice Deontologico dei giornalisti si rende nota l’esistenza di una banca dati di uso redazionale presso la sede di Corso del Popolo, 42 - Treviso. Responsabile del trattamento dati è il direttore responsabile a cui ci si può rivolgere presso la sede di Treviso - Corso del Popolo, 42 per i diritti previsti dalla legge 675/1996.
BEVERAGE INDUSTRY Technology for the Beverage Industry - International magazine in Italian/English Poste Italiane SpA - Spedizione in Abbonamento Postale - D.L. 353/2003 (conv. in L. 27/02/2004 n. 46) art. 1 comma 1 NE/TV - Anno 22 N°11/2017 - ISSN 2498-9541
Итальянские технологии в сфере производства напитков
2017
All right reserved. Reproduction in whole or in part without written permission is prohibited. The Publisher is not responsible for any materials, nor for writers’ nor contributors’ expressed or implied opinions.
.it
www.tecnalimentaria.it
Index
COMPANY
WEBSITE
PAGES
FIELD
A.WATER SYSTEMS SRL
www.watersystems.it
6-9
Beverage Industry
AERAQUE SRL
www.aeraque.com
11
Beverage Industry & Food Industry
AKOMAG SRL
www.akomag.com
12-13
Beverage Industry
ALBRIGI SRL
www.albrigi.it
14-15
Beverage Industry & Food Industry
ALTECH SRL
www.altech.it
16-17
Beverage Industry & Food Industry
AVE TECHNOLOGIES SRL
www.ave-technologies.com
18-19
Beverage Industry
DELLA TOFFOLA SPA
www.dellatoffola.it
10
Beverage Industry
ENOLMECCANICA VALLEBELBO SRL
www.enolmeccanica.com
20-21
Beverage Industry
ENOMET IMPIANTI SRL
www.enomet.it
23
Beverage Industry
F&P MACHINERY SRL
www.fpmachinery.it
24-25
Beverage Industry
FARCK SPA
www.farck.com
26-27
Beverage Industry
FBF ITALIA SRL
www.fbtitalia.it
2-3, 28-29
Beverage Industry & Food Industry
GALIGANI FILTRI SRL
www.galiganifiltri.com
30-31
Beverage Industry
METALNOVA SPA
www.mnmetalnova.it
32-33
Beverage Industry & Food Industry
MINI MOTOR SRL
www.minimotor.com
34-35
Beverage Industry
PIETRIBIASI MICHELANGELO SRL
www.pietribiasi.it
36-37
Beverage Industry & Food Industry
PRIAMO FOOD TECHNOLOGIES SRL
www.priamosrl.com
38-39
Beverage Industry & Food Industry
SMI GROUP SPA
www.smigroup.it
II^Cover, 40-41
Beverage Industry
SUPERCAP SRL
www.supercap.it
42-43
Beverage Industry
TMG IMPIANTI SPA
www.tmgimpianti.com
44-45
Beverage Industry
VELO ACCIAI SRL
www.vlsgroup.it
1, 46-47
Beverage Industry
A. Water Systems Srl
WS is a company, founded in 2005, working as process equipment supplier for the beverage industry. During these years, WS has achieved a very good reputation in the beverage industry field, managing to cooperate with the major global players, such as Coca Cola, Pepsi Cola, Nestlé Waters and Orangina-Schweppes, and with private investors installing new production facilities, quite often green fields, in emerging Countries. WS has met new standards for product quality, energy saving and maximum
Località Piana, 55/D - 12060 Verduno (Cuneo) Italy Tel. +39 0172 47 02 35 - Fax +39 0173 61 56 33 info@watersystems.it - www.watersystems.it
plant output while complying with the strictest criteria for hygiene and safety. All the devices are entirely conceived and designed to guarantee the best requirements in terms of microbiological, physical-chemical and organoleptic properties; the entire production process and software development are managed internally, as well as installations and commissionings which are carried out with WS’s own resources. WS’ products for beverage industry are: • water purification plants (mechanical filtration, microfiltration, reverse osmosis, UV disinfection, sterilisation) designed according to the customer’s exigencies and the chemical analysis; • sugar dissolving systems (single batch, double batch and continuous up to 35.000 l/h); • semiautomatic and automatic syrup rooms; • premix units; • flash pasteurising units; • ozone generators;
ASIATIC EDITION 2017/2018
6
• carbonating equipment (water, wine, beer, soft drinks); • in line syrup blending systems and ingredients mixing systems; • steam sterilisable microfiltering systems (juices, beer, wine); • mineralising equipment; • equipment for preparation of non-chemical bottles rinsing and disinfecting solutions (such as ozone) and chemical solutions preparing devices (peracetic acid, hydrogen peroxide, chlorine, etc.); • equipment for the preparation of sterile water; • manual and automatic CIP systems. Thanks to its skill and process expertise, today WS is widely present worldwide even with turnkey solutions including ancillary equipment (cooling equipment, boilers, etc.). WS’ philosophy is to manufacture highquality and reliable equipment, equipped only with top brand components: ALFA LAVAL, ENDRESS+HAUSER,
BEVERAGE INDUSTRY
A. Water Systems Srl
Località Piana, 55/D - 12060 Verduno (Cuneo) Italy Tel. +39 0172 47 02 35 - Fax +39 0173 61 56 33 info@watersystems.it - www.watersystems.it
PALL, ANTON PAAR, SIEMENS, FESTO, SPIRAX SARCO are the typical components our Customers will find on Their plants. The choice of providing only state-of-the-art solutions has brought us to be appointed as officially authorized integrator by ALFA LAVAL. Between main technical references, WS can list the supply of two fruit juice tubular flash pasteurizers for aseptic filling to ORANGINA-SCHWEPPES in France; furthermore, it’s significant to point out that WS is included in NESTLÉ WATERS’ authorized suppliers list for water purification systems: recently an important contract for the supply of a top-technology water treatment plant in the far East has been finalized.
BEVERAGE INDUSTRY
Amongst last supplies (early 2016), WS also boasts a complete line for soft drinks production in Las Vegas – USA (Coca Cola co-packer): from water treatment to hot fill pasteurizer, through sugar syrup preparation and ingredients mixing, also including CIP equipment. WS considers Customer Service one of the greatest keys to success: entire business, marketing, sales and profits depend on customers’ satisfaction so the after sales team is constantly trained to perform the simplest solution in the shortest possible time to support the customer’s business. “BLENDSYSTEM M” Premix Unit The growing market’s confidence gained by process plants manufactured by WS, allowed a continuous development of blending technology for carbonated soft drinks (CSD) production to such an extent that We reached a very high level of specialisation in manufacturing mass controlled blending systems, named BLENDSYSTEM M.
7
BLENDSYSTEM M is a piece of equipment for preparing beverages, completely preassembled on a skid for an easy and quick shipment and installation, conceived mostly for the production of carbonated soft drinks (CSD), but also carbonated mineral water (CMW) and still water (charged with nitrogen in order to increase the mechanical resistance of the bottle). The required quantity of ingredients (water, syrup, and CO2) is carefully measured and dosed in an electronically controlled continuous process. The whole system, realized to guarantee the highest qualitative standards and a qualitatively constant production, also running in conditions of considerable format change, is completely preassembled on stainless steel circular-section skid for an easy and efficacious cleaning. It usually includes the following subsystems: • inlet water deaeration: a vacuum pump removes incondensable gases; the pump is conceived to maintain the dissolved oxygen level below 1 ppm values; • carbon dioxide dosing (or nitrogen in case of still mineral water production): a modulating valve and a mass flow rate transmitter inject carbon dioxide in quantity that is proportional to water quantity loaded to the deaeration tank; the water flow rate is usually measured by a magnetic flow rate transmitter, which may be replaced with a mass flow rate transmitter in case water presents a very low electrical conductivity level. A special gas injecting and mixing system - specifically developed by WS -
ASIATIC EDITION 2017/2018
A. Water Systems Srl
Località Piana, 55/D - 12060 Verduno (Cuneo) Italy Tel. +39 0172 47 02 35 - Fax +39 0173 61 56 33 info@watersystems.it - www.watersystems.it
• performs a careful mixing with the water to be treated and, hence, best results in terms of product perlage; the carbon dioxide contents is maintained constant in the product receiving tank by a supervising software, which checks possible fluctuations in feeding water temperature and product buffer temperature; the effective dissolved carbon dioxide contents in the product is checked using a carbometric unit, installed in by-pass on the filling machine feeding line; • syrup dosing and mixing: at first syrup is stored in a small buffer tank, whose atmosphere is modified and enriched with carbon dioxide in order to avoid oxidation occurrence. Syrup injection is made by a sanitary design modulating valve and a mass flow rate transmitter in a quantity which is proportional to the water amount fed from the deaeration tank; furthermore, using the mass flow rate transmitter, it is possible to check constantly the effective density of the inlet syrup and therefore to compensate immediately for the dosing and to stabilize the sugary concentration in the end-product within established bounds (usually ±0,05 °Bx). A specific refractometer installed in by-pass on the filling machine feeding line, allows the constant
check of the product and, if necessary, its adjustment; similarly, the instruments minimize waste of both syrup and product during transitory phases of production, such as start and stop. Furthermore, customized solutions for product cooling are also available, depending on the environmental conditions of the system installation. The supervising software loaded on the mass premix unit BLENDSYSTEM M - is conceived to guarantee the best results in terms of dosing, offering at the same time an easy control by a friendly user interface; this software enables on one hand to set the main production parameters and visualize their state graphically and on the other hand to set the statistics parameters (ca, cp e cpk) connected to that kind of production. Using a more advanced version of this software, associated with specific instruments, it is also possible to control automatically saccharose inversion, so that the need of intervention by laboratory technicians is reduced. The equipment is equipped with field buses (MPI, Profibus or Ethernet) for a complete integration in the bottling line and the control of production, cleaning and sanitizing processes.
ASIATIC EDITION 2017/2018
8
BEVERAGE INDUSTRY
Akomag Srl
Frazione Diolo, 15/D - 43019 Soragna (Parma) Italy Tel. +39 0524 59 90 97 - Fax +39 0524 59 90 12 info@akomag.com - www.akomag.com
The automatic washing of returnable bottles has today reached a level of high specialization. AKOMAG is a young, flexible and dynamic company that bases its organizational strategy on Customer Satisfaction, the quality of its systems, its assistance services and technological innovation. The company has been working in the bottling sector for many years, and boasts a long construction experience, which allows it to guarantee maximum yields for the client, together with the highest level of operational practicality, minimum working costs and long lasting equipment, due mainly to the fact that the machines are built using certified, top quality materials. This experience and the company research are made available to the clients who demand only the best. The simple, modular structure of the company’s production range has allowed for the progressive increase in the functions and level of sophistication, including special washing and sanitization sections, automatic process parameter control, system security devices, energy saving devices, the reduction of exhaust waste and automatic sanitization of the most important parts in terms of hygiene. During the design the utmost attention has been paid to ensuring the adoption of all details for health protection and operator accident prevention, along with all the necessary protective devices for noise reduction. Great efforts have also been made to reduce the size of these traditionally large and awkward machines, in order facilitate space optimization in bottling plants. The AKOMAG production range includes bottle washers, rinsers and sterilizers for glass and PET bottles and for large 3-4 and 5 gallon bottles, crate washers and various complementary machine accessories. The company’s operational site is in Soragna (Parma), and has a covered surface area of more than 1,500 m2 for production, plus a spare parts warehouse and technical, administrative and sales offices.
ASIATIC EDITION 2017/2018
12
BEVERAGE INDUSTRY
ALTECH Srl
Viale De Gasperi, 72- 20010 Bareggio (Milano) Italy Tel. +39 02 90 36 34 64 - Fax +39 02 90 36 34 81 info@altech.it - www.altech.it
ALTECH - Advanced Labelling Technologies - is one of the major European producers of self-adhesive label applicators for product decoration, coding and identification. Today, the company distributes its systems all over the Italian territory through a network of direct sales, while the commercial distribution for Europe and overseas takes place in more than 50 countries through a network of 80 qualified resellers and 3 subsidiary companies in the United Kingdom, the United States and South America. ALTECH machines are used in many industry fields, from food to cosmetics, from pharmaceutics to chemistry. From small-sized and low-cost automatic applicators to highly sophisticated and high-performance heads, complete linear labelling systems for flat, oval and cylindrical bottles, the company’s range also includes print/apply systems equipped with thermal transfer printing groups of Japanese leader SATO, and of which ALTECH is distributor in Italy. Its range encompasses the following products: ALstep – low-cost applicator featuring modular and flexible configuration. It is equipped with reels of 300 mm diameter and 100 mm label length, granting speed 30m/min max of the S version (15 k/min for E version). ALritma – high-performance label applicator, which can be easily integrated in packaging lines where high yield and reliability are essential requirements. Reels with 300mm diam. Max labelling speed 40m/min for the standard version, and 90 m/min for the X version (with reels of diam. 400 mm). It is also available with thermal transfer printing group in the ALritmaT version, for print/ apply applications. ALline – in-line labelling systems can be configured for labelling cylindrical, elliptical and rectangular products, or for the labelling of fast-moving or irregularly–shaped products. ALline C is ideal for applying wraparound labels to cylindrical packages (plastic, glass or metal bottles, jars etc.) of food, chemical, cosmetic and pharmaceutical products. ALline E applies one, two or more front/back labels to elliptical or rectangular products, in plastic, glass or metal containers. Its solid and compact structure can be fitted with two or more opposing side labelling heads from the ALritma series. ALcode – print/apply units for label printing/applying in real time. The printing group (SATO or compatibles) can operate on-line from
ALline In-line labelling system
a PC for data transmission to be printed on the label to be applied on the product at once. The labels can be printed with different information, as it is for pallet labelling: ALcode P version is studied and built for pallet double-sided labelling up to 120 p/h ALbelt - simplified linear labelling system which is open and compact, completely automatic and particularly economical. It can be configured for upper and side labelling of various products, mainly those which are flat. The ALbelt C version is configured for applying wraparound labels to cylindrical products such as bottles, cans, jars and pots, and represents the ideal entry-level, automatic stand-alone solution to get started with self-adhesive labelling. The ALbelt two sections conveyor version is instead configured for top & bottom labelling of products (as well as the base when required). One or more label applicators from the ALstep and ALritma ranges are used for the labelling, often equipped with printing units. ALTECH strengths • Expert personnel with a true passion for engineering • Machines and systems designed to be modular and expandable; all components are accessible and interchangeable • Use of high-strength alloys, high-reliability electronic and pneumatic components • Compliance with safety requirements and good manufacturing practices Consulting and services Its expert knowledge of logistics, packaging and materials issues allows ALTECH to configure its labelers to solve any labelling problems and to create customized solutions for its customers. For more information www.altech.it
ALcode P Pallet print & apply labeller
ALcode Print & apply unit
ASIATIC EDITION 2017/2018
ALritma Hi tech label applicator
16
BEVERAGE INDUSTRY
Ave Technologies Srl
SWAN new short-pipe electro-pneumatic isobaric fillers are AVE Technologies’ latest novelty standing out for their special features of functionality and construction quality. These plants are suitable for throughput up to 80,000 bottle/h and are engineered upon “clean design” philosophy; in addition, stainless steel materials are also used to produce all component. External pressurized tank is equipped with a variable speed restart pump for overall control on the pressure of the filling head. The machine manages three different process gases, such as: pure CO2 at filling pressure; CO2 impure from the bottle during low pressure isobaric filling phase to vacuum wash the bottles and pressurization, and vacuum making for bottle pre-discharge and decompression.
Via della Costituzione, 127 - 30038 Spinea (Venezia) Italy Tel. +39 041 541 26 24 - Fax +39 041 508 91 00 info@ave-technologies.com - www.ave-technologies.com
The modular isobaric valve runs at two filling speeds and is provided with short or long pipe to perform filling from the bottom. A dome-shaped board is used to convey the bottles and ease water and glass shards drainage. Modular structure with clockwise and anticlockwise configuration. Setting for rinser and screw capper, or crown capper as an alternative in case of simultaneous us of more cappers. Board handling of bottle conveying by means of synchronized brushless motor with main motor of the filling carrousel. Bottle synchronizing screw runs with fix centre with the varying of the diameter of the bottles, and it is mounted on a tilting
ASIATIC EDITION 2017/2018
18
structure as to ease change of formats. Stars and bottle guiding equipment are in stainless steel while wear outline is in rubber as to ease the cleaning of the handling system. Machines are also equipped with dismountable shields with tilted conic-shape outline, to avoid glass shards from bouncing back on the valve after possible explosion of the bottles. Bottle lifting stainless steel jacks are fully pressurized as to avoid water or other impurities from being sucked in. SWAN is the latest and most qualified technological innovation from AVE Technologies, a company member of Della Toffola Group.
BEVERAGE INDUSTRY
Enolmeccanica Vallebelbo Srl
Loc. San Bovo, Via Statale 45 - 12054 Cossano Belbo (Cuneo) Italy Tel. +39 0141 88494 - Fax +39 0141 88284 marketing@enolmeccanica.it - www.enolmeccanica.it
Since 1983 Enolmeccanica Vallebelbo has been building a privileged partnership with its customers for the supply of corking and capping machines to which 2 years ago also the company added the rinsing machines. Both lines of machines are customized according to the specific needs of the customers and are produced in stand-alone versions or as turrets to be fitted on the monoblock machines manufactured by many producers who have become company’s customers. The machines are developed and produced keeping in mind the specific needs of the sector of use; therefore, they are manufactured with the right characteristics and the most suitable materials to reach high levels of reliability, safety and compliance with the diverse regulations of alimentary and hygienic compatibility. Its great flexibility allows the company of Cossano Belbo (Cuneo) to meet all needs of its customers while its richness in human resources and technology represents the added value that led it to conquer a wide market share. Enolmeccanica Vallebelbo offers a range of products able to meet the most varied market sectors: beverage and oenological industry, chemical, pharmaceutical and foodstuff branches, often developing customized solution for any type of container, be it
ASIATIC EDITION 2017/2018
20
of glass or plastic, to supply state-of the art machines, designed and manufactured to meet any specific requirement. Most parts of the machine are produced inside the factory of the company by using numeric control tool machines so guaranteeing a top-quality final product. The global market is ever more demanding and the beverage sector is particularly hard, since preservation is essential and challenging, for instance for products like milk and fruit juices, for which we have to develop ever simpler technologies easy to be maintained. In particular Enolmeccanica Vallebelbo rinsing/sterilizing machines feature innovating solutions that simplify dramatically the sterilization and C.I.P. processes. Also the requirements of the producers of alcoholic drinks are challenging since the company is requested to design innovating machines for the processing of bottles and closure have always new designs and unusual shapes, therefore, very delicate to be processed. In conclusion: Enomeccanica Vallebelbo is a dynamic company that keeps following its guideline based on quality and customer satisfaction, today more than ever.
BEVERAGE INDUSTRY
F&P Machinery Srl
Via Don G.Minzoni,122 - 42043 Gattatico (Reggio Emilia) Italy Tel.+39 0522 909732 - Fax +39 0522 902428 info@fpmachinery.it - www.fpmachinery.it
F&P Machinery is proposed as an integrated manufacturer and supplier of services for the food industry. Its goal is to provide and offer its customers innovative solutions at the forefront of today’s technology, focusing attention on the maximum reduction of total line costs while ensuring maximum production efficiency. F&P Machinery’s many years of sales and manufacturing experience have taught it that nothing is more valuable than personal dedication to customers. All its services and installations reflect its dedication to this mission. With the aim of satisfying the growing needs in the bottling world, F&P Machinery has created a completely full range of fillers and filling monoblocks dedicated to mediumhigh production. The new range of machines permits the possibility to offer solutions aimed at solving
BOTTLING SOLUTIONS FOR MEDIUM-HIGH PRODUCTION
ASIATIC EDITION 2017/2018
24
the most varied bottling requirements, for both PET bottles, glass bottles and cans with a production rate from 1,000 to 25,000 containers per hour for the filling in bottles and beyond 40,000 should the case be in cans. The new range of isobaric fillers with an electronic filling system, for both bottles and for cans; “hot-fill” monoblocks allowing the possibility to put small cubes of fruit into bottles and integrated small monoblocks with labeling sections incorporated, allows F&P Machinery to propose itself as “the problem solver” for customers around the world. The experience acquired in the numerous years of study, design and construction is for F&P Machinery a continuous stimulus to improve its expertise, especially in the event of new drinks or particular requests. Water, soft drinks, juices, beer, wine, liqueurs and milk are the products for which F&P Machinery is able to find and propose the best bottling solutions. Also in the field of sanitation of machinery and plants, F&P Machinery confirms its commitment to the research and development of new and technologically advanced solutions by including in its list of CIP systems a Chlorine generator model “NEKIMOL” that allows the production of chlorine based on the electrolysis principle.
BEVERAGE INDUSTRY
can design your best solution for the profitability of your business
F&P machinery srl Via Don G. Minzoni, 122 - 42043 Gattatico (RE) Italia - Tel: +39 0522 909732 - Fax: +39 0522 902428 E-mail: info@fpmachinery.it www.fpmachinery.it
Farck Spa
Via Roma, 94 - 26010 Pianengo (Cremona) Italy Tel. +39 0373 741 44 - Fax +39 0373 747 88 farck@farck.com - www.farck.com
Farck S.p.A. is an Italian company, UNI EN ISO 9001:2008 certified, highly specialized in the design, construction and installation of plant and equipment for the food industry in general, wine and beverage; stainless steel storage and process tanks for all productive sectors; tankers in stainless steel for the transport of food liquids and ADR dangerous liquids. Farck S.p.A. is now synonymous with innovation, competence, passion and expertise. Farck S.p.A.’s production workshop and sales offices are located in Lombardia, in Pianengo (Cremona) and cover an area of about 40,000 m², of which about 6,000 m² covered. Farck S.p.A., thanks to the acquired specialization, is able to realize installations, equipment and tanks, without posing technical and dimensional limits, all in compliance with the strict planning regulations in force. Concentration and desulphurization plants for the wine, fruit juice and beverage industry with features and advantages such as: product circulation “falling film” type, with vertical pipe-bundle heat exchangers, single or multiple effect (3-6 effects); “TVR” plants using the principle of the “thermal vapor recompression”, which allows a drastic reduction of the energy consumption: less than 1 kg of steam to evaporate 10 kg of water; “MVR” plants using the principle of the “mechanical vapor recompression”; capacity of concentration from 1,000 up to 50,000 liters of water evaporation; maintenance of the organoleptic and chemical-physical characteristics of the treated product; high flexibility in the liquid flows and process vapours; centralization of all controls in a simple touch-screen panel. Thermovinification plants which offer short process time; continuous cycles and low operating costs; excellent yields in the extraction of the color of the grapes; production of raw material suitable for the vinification, in order to obtain products with fruity taste and attractive colour; possibility to select the product outlet temperature from 35 up to 55°C. Process and storage tanks with stirring system studied for every type of product; temperature control systems and insulation systems designed according to the characteristics of the products to be stored. PED tested autoclaves, fermenters and brewhouses.
ASIATIC EDITION 2017/2018
26
BEVERAGE INDUSTRY
FBF Italia Srl
FBF Italia has designed and manufactured since 1987, high pressure homogenizers, positive displacement pumps, laboratory homogenizers, dosing systems and, thanks to the wide experience gained in this field, is now a key point-of-reference for plants manufacturers, suppliers of turnkey equipment and end-users in the food, chemical and pharmaceutical sectors. On-going innovation, exacting experimentation of special materials, strict quality controls and endurance tests allow FBF Italia to guarantee maximum performance, durability, reliability and safety; its mission is to offer to all its customers not only excellent sale services but also continuous relationship with constant, direct postsale technical assistance; the target is to keep friendly relationship built on mutual evolution and innovation. FBF Italia’s machines are suitable to process a lot of products and can be inserted into complete process/production, both in sanitary and aseptic design.
Via Are, 2 - 43038 Sala Baganza (Parma) Italy Tel. +39 0521 54 82 00 - Fax +39 0521 83 51 79 info@fbfitalia.it - www.fbfitalia.it
The main utilization fields of the company machineries are: • dairy industries (milk, cream, cheese, yogurt, caseinates, proteins, soya milk, etc.); • ice-cream industries; • food, processing, preserving and beverage industries (fruit juices, tomato sauces, oil, ketchup, eggs, vegetable greases, emulsions, concentrates, baby food, etc.); • cosmetic, pharmaceutical, chemical and petrol-chemical industries (starch, cellulose, wax, colorants, beauty creams, tooth paste, detergents, disinfectants, emulsions, inks, latex, lotions, emulsifiers oils, pigments, proteins, resins, vitamins, etc.). But what about the homogenizing principle? In order to permanently mix one or more substances in a liquid, a homogenizer must be used in such a way as to make it possible to micronize and disperse the suspended particles in the fluid, rendering it highly stable even during successive treatments and storage.
ASIATIC EDITION 2017/2018
28
The product reaches the homogenizing valve at a low speed and at high pressure. As it passes through the valve, it is subject to various forces that cause the micronization of the particles: violent acceleration followed by immediate deceleration causes cavitation with explosion of the globules, intense turbulence together with high-frequency vibrations, impact deriving from the laminar passage between the homogenizing valve surfaces and consequent collision with impact ring. Homogenization can occur with the use of a single stage homogenizing valve (suitable for dispersion treatment), or double stage homogenizing valve (recommended for use with emulsions and for viscosity control when requested). FBF Italia’s range of machines can be commonly classified as follows: • high pressure homogenizers: The homogenizer is often necessary to mix one or more substances within a liquid. This
BEVERAGE INDUSTRY
FBF Italia Srl
Via Are, 2 - 43038 Sala Baganza (Parma) Italy Tel. +39 0521 54 82 00 - Fax +39 0521 83 51 79 info@fbfitalia.it - www.fbfitalia.it
machine allows micronizing and scattering the particles suspended in the fluid, so that the product becomes highly stable, no matter the followings treatments and storage the product may undergo. The “Buffalo Series” homogenizers are manufactured according to the UE directives and are available with capacity ranging from 50 up to 50.000 litres/hour; according to the products to be processed, the requested pressure may vary up to 2.000 bars (29.000 psi) • positive displacement pumps: these pumps are used to transfer the products from a storage system or process one to a further part of the plant at a high pressure. These machines are commonly used for feeding of spray driers, tomato paste plants, osmosis plants, etc. • laboratory homogenizers: manufactured
BEVERAGE INDUSTRY
to replicate the same homogenization conditions that can be expected in a real production process these machines offer the possibility to execute tests up to very high pressure (1500 bar) and do not need of any other device to work. Easy to use and to move, with the highest reliability, is the best choice for keeping the production always under control. • positive displacement pumps for product containing particles: these pumps are mainly used for product containing particles with a max. sizes of 15x15x15 mm such as tomato cubes, vegetable or fruit pieces. The construction of such a machine is much the same as the homogenizers, except for the compression head which is equipped with special pneumatically controlled valve groups.
29
ASIATIC EDITION 2017/2018
Galigani Filtri Srl
Strada Provinciale Colligiana, 50 - 53035 Monteriggioni (Siena) Italy Tel. +39 0577 30 50 04 - Fax +39 0577 30 50 19 info@galiganifiltri.com - www.galiganifiltri.com
Galigani Filtri is a leader in the design and construction of filter presses and relevant filtration systems. Since 1958, the company has boasted over 3,000 installations in 5 continents, created with skill and professionalism, in order to offer a high-quality product and a support service for users, installers, and designers. The company is based in Italy, located in a modern facility in the heart of Tuscany, where it makes use of the most modern systems of research, study, and design so as to best solve the problems of each individual application, as well as provide adequate pre- and post-sales assistance through its qualified technicians. The company is, furthermore, equipped with a laboratory for filtration testing on samples supplied by clients to determine all the necessary parameters required for sizing the filter press that is most suitable for their needs. Production includes filter presses and pumping units that feed the filter presses. The wide range of filter presses varies from manual discharge machines to fully automatic machines run by modern PLCs. Galigani Filtri manufactures filter presses for all types of applications: food, chemical, pharmaceutical, explosive atmospheres (ATEX), purifying waste water, acid filtration, aggregates, mining, galvanic industries, recycling industries, and so on. All machines are equipped with the most advanced safety devices. The press filters and filtration systems that are manufactured by Galigani Filtri carry out “mechanical� filtrations, and therefore the liquid does not undergo chemical changes. Filtration can occur on the synthetic filter cloth, which retains solid particles up to 1 micron, or on cardboard for particles that measure less than or equal to 1 micron. When it comes to the most technologically advanced systems that Galigani Filtri can provide for filtration and clarification before bottling, the Diatom and the Clearness systems are in the forefront. The Diatom system is comprised of a filter cloth for the filter press and is equipped with all the necessary parts (tanks, pumps, valves ...) that are required for filtration processes using various aids (fossil shell flour or cellulose flour, perlite...). The Clearness system is a filter press with an Aisi304 or Aisi316 structure, which uses cardboard filters and a plate pack that is entirely sealed and protected from contact with the external environment.
ASIATIC EDITION 2017/2018
30
BEVERAGE INDUSTRY
From the green heart of Tuscany
Metalnova Spa
METALNOVA SpA has been engineering and producing bottling machines since 1981. The company’s greatest news of recent years has been the BASELESS project, the new philosophy of engineering and making
Via Mercalli, 4/a - 43122 Parma, Italy Tel. +39 0521 60 75 68 - Fax +39 0521 60 75 76 info@mnmetalnova.it - www.mnmetalnova.it bottling machines. The new design features the machine carrousels hanging from an upper structure where motorization and gear elements are installed; hence, there is nothing below the bottles for remarkably easy interventions and cleaning operations to be carried out. The following filling solutions are present in different beverage sectors: • SCS gravity-level filling machines for
non-carbonated products, developed to reduce contamination risk in sensible products like still water. • LG-EP isobaric filling machines with electro pneumatic controls for carbonated products, studied to fill various kinds of soft drinks avoiding foaming. • VMAG electronic volumetric filling machines for conductive non-carbonated products, studied to guarantee highly precise dosing and avoid any contact between bottle and filling valve. Versions for PET bottles of 5 to 12 litres and 5 gallons are also available. • LG-VMAG electronic isobaric volumetric filling machines for carbonated products studied to guarantee filling precision, simplify operations of change of formats and sanitization. • VMAS weight filling machines with mass meters for oil, studied to guarantee filling precision and reduce any cleaning problem about oil. • HVR/LVR vacuum recirculation filling machines with external tanks for hot and/ or highly viscous filled products; studied to guarantee filling temperature and ease CIP operations. METALNOVA range of products also consists of complete lines for 5-gallons bottles (available for returnable polycarbonate containers and one-way PET containers) and turnkey bottling lines for which METALNOVA provides an engineering line lay-out service and integration with machines from specialized subcontractors. Attention to cleaning operations in its filling machines, and accurate and flexible customer service from purchase right to after-sales assistance are the pivotal points of the corporate strategy.
DELTA L-VMAG Linear filler/capper for one-way PET bottles
BASELESS monoblock internal view
ASIATIC EDITION 2017/2018
32
BEVERAGE INDUSTRY
Mini Motor Srl
Mini Motor’s history began in 1965, in Bagnolo in Piano, in the heart of Italy’s motor valley in Emilia, when Mr. Gianfranco Franceschini decided to bet on his passion for mechanics and innovative solutions. The first products combined metal and electricity to create sunblind, and internal and external frame automatic motion, but with a distinctive touch: design, the ability of making nice what works perfectly. Mini Motor brand was established in 1974, when the production was strongly oriented to industrial electric motors; two elements were added to metal and electricity: electronic and IT technology. Today, Mini Motor designs and produces automation and motion control innovative solutions, as well as thousands of items, such as worm gear motors, coaxial and geared motors, drivers, frequency converters, geared motors and brushless servo gear motors featuring top-quality built-in drive and excellent performance, to be used in extreme conditions and particularly critical applications, also in highly demanding sectors, such as food, bio-medical and chemical, aeronautic and naval. Mini Motor is active in more than 55 Countries around the world and is supported by an efficient distribution network accounting for 5 branches – in Italy, Germany, The Netherlands, the USA, and the UAE – and a capillary network of distributors.
Via E. Fermi 5 - 42011 Bagnolo in Piano (Reggio Emilia) Italy Tel. +39 0522 95 18 89 - Fax +39 0522 95 26 10 info@minimotor.com - www.minimotor.com
Excellence and constant innovation Mini Motor has always been focused on technological evolution to set and maintain the production processes, raw materials and product characteristics. Constant commitment to find innovative solutions allowed Mini Motor to realize the fundamental concepts of smart manufacturing: human resources, man’s arms and anthropomorphous robots work in a more intelligent and integrated way, to enhance the process speed and increase flexibility. Mini Motor can therefore guarantee a high degree of customization as well as very high quality and competitive market price, also for standard production, combining in every single product production excellence, operating precision and superior efficiency, therefore higher yield and less cost. O-km design and production Motor, gearbox and electronics are integrated in a native way, designed and fully produced in-house by Mini Motor with top-quality and 0-Km components, thanks to a network of carefully selected suppliers
ASIATIC EDITION 2017/2018
34
of Emilia’s industrial district. This approach enables to achieve: • higher integration of all the process phases, • time and cost optimization of final products, • high productivity, thanks to higher integration between design and production. Focus on integration, connectivity and user-friendliness Every Mini Motor product can be easily integrated in an Industry 4.0 framework, because it offers remarkable connection capacity, with the support of the most common industrial communication fieldbus protocols, such as: CanOpen, Modbus, Ethercat, Ethernet/IP, Profinet and Powerlink. Optimized and highly compact design guarantees reduced footprint and simple positioning, access and maintenance. Some series are also equipped with a multi-turn absolute encoder that stores the rate of the latest position of the motor for 6 months, thus facilitating for instance the re-start of the system in case of stop. Certified quality Mini Motor is ISO 9001:2008 certified, the standard that is the reference for anyone who wants to have the quality of its production process extensively controlled, starting from customers’ requirements up to the control on any production step. All Mini Motor products have obtained the cCSAus (Canadian Standards Association) mark for both the Canadian and US markets, and the IP65 protection rating, in compliance with the CEI EN 60529 standard, thanks to its manufacturing solutions and the high-quality components used. The stainless steel IP69K series is, on the other hand, compliant with the international protections rating of the same name that identifies products totally protected from dust, sand and any small solid particles in general, and suitable for permanent immersion in water and for high pressure and high temperature jets of water.
BEVERAGE INDUSTRY
Pietribiasi Michelangelo Srl
Via del Progresso, 12 - 36035 Marano Vicentino (Vicenza) Italy Tel. +39 0445 62 10 88 - Fax +39 0445 6216 31 pietribiasi@pietribiasi.it - www.pietribiasi.it
MARANO VICENTINO [VI]
del Progresso,Srl 12 -was 36035 Pietribiasi Via Michelangelo established TEL: +39 62 10 88 / FAX: +39the 0445beginning 62 16 31 between the0445 end 1960 and of E-mail: pietribiasi@pietribiasi.it the next decade. www.pietribiasi.it From the beginning the family-run company specialized in the construction of equipment for the dairy industry and developed later into the field of soft drinks, juices and beverages in general. Today the Pietribiasi name is among the 104 more well-known in the dairy and beverages sector and the company is internationally acknowledged, particularly in the realization of “turn-key” projects regarding process of pasteurized drinking milk, yoghurt, different liquid foods. Looking more closely at the company’s kinds of cheese, butter, etc. product ranges, the Pietribiasi division Complete equipment means starting from PLANTSdesign and milk receiving or recombination to final covers theCOMPLETE research,MARANO project FOR LIQUID FOOD PROCESSINGVICENTINO [VI] supply of complete systems for the process product including packaging. The same for Via - 36035 processing, from juice preparation to of milk (HTST – ESL – del UHT),Progresso, cream – juice 12 fermented products from milk process filling. Pietribiasi designs (yoghurts in the +39 various known TEL: 0445 62versions, 10 88 / FAX: +39 0445and 62produces 16 31 plate and sour cream, Smetana, kefir, labneh, etc.), tubular heat exchanger for pasteurization E-mail: pietribiasi@pietribiasi.it fresh soft cheeses, as well semi and hard and thermal treatment (cooling and/or cheeses, “pasta filata-pizza cheese” (such heating) of different liquid foods (milk, cream, as mozzarella, caciocavallo, etc.) and other ice-cream mix, fruit juice, eggs mixture, products processed from cow, sheep and beer, wine and many others). Skid mounted pasteurizers can be completed with goat milks. Pietribiasi Michelangelo is also very well- degassing unit, separator, homogenizer. known for its ice cream mix preparation and In the beverage field, the range includes pre-mix units, sugar dissolving systems, pasteurization. In this field the company has a wide experience filters, mixing and storage tanks as well as and can cover all equipment needs from of course the complete thermal treatment small to bigger plants for the production of: up to the filling.
www.pietribiasi.it
These kinds of plants are “tailor-made” and designed according to customer’s specific demands. The company is also renowned and appreciated for following products: Batch pasteurizers; discontinuous cream pasteurizers; butter churns (available in a wide range of models from 20 L to 3000 L total capacity); semi-automatic butter forming machines. Its fifty-year experience in the food-stuff field, its long lasting cooperation with many European organizations and companies, the specialized knowledge in these processing fields, equipment and technologies, skilled level of staff operating in Pietribiasi, a flexible and friendly management and lead of company by ownership, are the powerful basis of the success of Michelangelo Pietribiasi company.
104
COMPLETE PLANTS FOR LIQUID FOOD PROCESSING
ASIATIC EDITION 2017/2018
36
BEVERAGE INDUSTRY
COMPLETE PLANTS FOR LIQUID FOOD PROCESSING + BEER AND DRINKS PASTEURIZERS
Priamo Food Technologies Srl
Viale delle Industrie, 1 - 31040 Nervesa della Battaglia (Treviso) Italy Tel. +39 0422 96 17 - Fax +39 0422 44 01 34 info@priamosrl.com - www.priamosrl.com
The plants consist of one or more flocculators of different size, entirely built in stainless steel Aisi 304, featuring a cone-shaped bottom for a perfect discharge of ricotta. The particular steam injection system and the bottom with central discharge enable correct agitation of the whey as to get maximum yield. The bottom and sides of the flocculator are insulated; it features inspection hatch on the ceiling and efficient washing system. By building all connections for the inflows of technologic additives, for temperature control, level control and more, Priamo Food Technologies designs all its flocculators to be fully automated. As well as being provided with gangway and stairs, the flocculators are also equipped with control board according to customer’s specific requirements. The company proposes the following two solutions, with different automation level, for the draining and drying phases. The first solution sees a draining tank, single or double, under the flocculator; inside the tank there is a hopper with a pump to transfer the product. Moreover, it can also be provided with a lid for C.I.P. washing. The second solution sees a stainless steel AISI 304 tunnel with inside belt for the draining and drying of the product. The structure of the tunnel, with inspection hatches, enables C.I.P. washing of the belt (made in non-toxic, micropore plastic material) and easy ordinary washing. The belt feeding system features an automatic compensation system of thermal expansion of the same belt, as well as regulation of the feeding speed by means of a static frequency converter. An electro-pump for the transfer of the product and a pump for the transfer of the curd whey are installed in the tunnel. In the end, the ricotta is transferred to one or more mixers where it can be added with other components before the homogenization and packaging phases that follow.
ASIATIC EDITION 2017/2018
38
BEVERAGE INDUSTRY
Smi Spa
Via Carlo Ceresa,10 - 24015 San Giovanni Bianco (Bergamo) Italy Tel. +39 0345 401 11 - Fax +39 0345 402 09 info@smigroup.it - www.smigroup.it
SMI: 30 years connected to the marketplace In 2017, SMI has celebrated its 30th anniversary. That is a crucial goal that the company would like to share with all the stakeholders who contributed to it. Since the very beginning, SMI’s path to success has been characterized by countless challenges and innovative ideas which have made the history of packaging and have turned the company into a reference point for many businesses of the food & beverage, dairy and detergents sectors. The bottling and packaging machines manufactured by SMI are increasingly more inspired to the principles of Industry 4.0 and the Internet of Things (IoT) platforms for totally automated production systems. SMI’s latest technical developments are marked by “the new age of bottling” and “the new age of packaging” concepts and by the launch of the new ERGON series of primary, secondary and tertiary packaging machines satisfying production requirements up to 33,600 bottle/hour. Moreover, SMI offers today cutting-edge technologies for both the supervision and automation of bottling lines, the monitoring of production cycles, data collection and a more efficient and environment-friendly industrial process management. The constant innovation is the driving force of SMI products’ success enabling to design, manufacture and offer to thousands of clients worldwide state-of-the-art machines and systems capable of adapting easily and efficiently to the requirements of an ever growing marketplace. With over 6,000 machines delivered all over the world, SMI boasts a long experience in the packaging sector and offers many different solutions to satisfy the wide range of needs of every type of client.
ASIATIC EDITION 2017/2018
SMI and the importance of R&D investments Investments in advanced technology and breakthrough innovation are the main driving force for the success of SMI in the world. In order to maintain and further develop its technical expertise, SMI annually invests a significant share of its turnover in Research & Development projects. In almost 30 years, those foregoing investments have enabled SMI to market a wide array of innovative bottling and packaging machines as the new LSK, CSK and SK ERGON series of automatic shrink wrappers enable to package a large range of containers in shrink film only, cardboard flat pad + shrink film, corrugated cardboard tray + shrink film or corrugated cardboard tray only. Recently, a new series has been launched: the new AFW ERGON series of compact shrink wrappers with 90° configuration product in-feed, especially suitable for the packaging of square- or rectangular-based containers/packs.
40
BEVERAGE INDUSTRY
Via Carlo Ceresa,10 - 24015 San Giovanni Bianco (Bergamo) Italy Tel. +39 0345 401 11 - Fax +39 0345 402 09 info@smigroup.it - www.smigroup.it
Smi Spa
All packers of the LSK, CSK, SK and AFW series have capitalised on the many different innovations introduced by the ERGON platform, such as an ergonomic machine design, slightly rounded sliding doors, motors mounted on the machine’s external edges, easy access for maintenance interventions. SMI’s new secondary packaging machines are equipped almost exclusively with brush-less motors whereas traditional motors are installed only on the shrink tunnel and on the cardboard climb; this solution ensures higher efficiency and precision of movements and low energy consumption. Furthermore, the ERGON packers are equipped with a POSYC control panel incorporating a user-friendly man-machine interface with touchscreen display and advanced functions of diagnostics and real-time technical support. The new shrink tunnels boast cutting-edge technical solutions ensuring energy savings, top environmental compatibility of production processes and high quality of the pack manufactured. At the shrink tunnel outlet, a conveyor connects the tunnel belt to the conveyor system of the production line, ensuring a proper thermal transition of the pack thanks to a ventilation device. Complete solutions for every bottling & packaging need SMI designs and manufactures complete bottling & packaging systems, chiefly destined to the food & beverage industry, but also for the detergent, personal hygiene and chemical/ pharmaceutical product sectors. The turn-key lines proposed by SMI are the ideal solution for output needs from 3,600 to 33,600 bottles per hour also requiring high efficiency, broad operating flexibility, low energy consumption and a good quality/price ratio and are suitable for any need, based on the innovative principles of Industry 4.0 for the realization of the so called “intelligent factory”. The range of turnkey systems proposed by SMI includes costsaving and compact lines as well as full optional and complex solutions, with a wide array of intermediate products that can satisfy customers’ current and future requirements in terms of output rate, product to be packaged, process automation and facility size. When SMI technicians design new projects, they gather the most recent technology available within the industrial automation sector, so they can intensify integration between the working, management and control systems of the numerous “intelligent” devices that work on the production line. Among the automation and control solutions for the production line, SMI has developed SWM supervisor. SWM Supervisor is based on an open and flexible modular enterprise web portal, that fits any application environment. SMI customers can use this innovative system to easily identify the main causes of “downtime” on their bottling/packaging lines, achieve greater overall efficiency and reduce the time required for system maintenance and format changes.
New blow-moulder EBS K ERGON: SMI solution devoted to Industry 4.0 At Interpack 2017, SMI exhibited the world premiere of the new compact blow-moulder EBS K ERGON in ECOBLOC® version as well as an electronic volumetric filler. A new important step in the “new age of bottling” focused on Industry 4.0. Since 1987, SMI has been developing cutting-edge projects and technologies, in order to offer turn-key bottling lines and flexible, ergonomic, efficient packaging machines, increasingly inspired by the concepts of Industry 4.0 and Internet of Things (IoT). Based on the technical innovations of the stretch blow-moulders of the EBS ERGON series (Electronic Blowing System), SMI engineers have developed a new series of very compact rotary machines, called EBS K ERGON (“K” refers to the German word “Kompakt”), suitable for outputs up to 8.800 bottle/hour. The new models, available in 2-, 3- and 4-cavity versions, offer all advantages of the rotary technology, with an output range traditionally controlled by linear blow-moulders (from 3-4.000 to 8-9.000 bottle/hour); thanks to the state-of-the-art solutions, the EBS K ERGON series can produce PET containers up to 3 litres with a maximum output of 2200 bottle/hour per cavity for the 0,5-liter format. A market-oriented and flexible organization In a global market where competition is getting fiercer and fiercer, the possibility to guarantee a “next door” service is for SMI a key factor to effectively and successfully support customers wherever they are. Thus, over the years SMI has set up a widespread network of branches and representative offices in order to extend the service to the widest number of clients. In the Asian continent, SMI operates through two wholly-owned subsidiary companies: SMI Asia Services Sdn Bhd based in Malaysia and SMI Machinery Beijing Co. Ltd based in China (with offices in Beijing, Nanjing and Guangzhou). Local staff’s expertise and knowhow ensure an accurate and qualified support to Asian customers.
BEVERAGE INDUSTRY
41
ASIATIC EDITION 2017/2018
Supercap Srl
Supercap Srl, Italian business with twentyyear experience in the bottle closure sector, has always developed a close cooperation with its customers paying maximum attention not only to final products, but also to functional cutting-edge technologies involved in packaging development. At the beginning, Supercap addressed its production to wine closure manufacture and divided its production of wine caps into four main categories, such as: Supercap Swift, Evolution, Select and Supercap C for sparkling wines. This production was soon extended with T Caps closures, known as closures for spirits, oil, vinegar, and perfumes. The company develops T-Cap closures focusing on both total respect for the products and personalization, thus allowing customers to create closures of different materials, such as aluminum, plastic and wood. Thanks to Research & Development activity, which can be identified as Supercap’s creative core, the company can deeply understand and know its products, and create new cutting-edge technologies, generating closures featuring unique, functional and modern design, for a type of packaging whose every finest detail makes the difference.
Via Cairo, 83 - 61024 Mombaroccio (Pesaro Urbino) Italy Tel. +39 0721 47 05 07 - Fax +39 0721 47 12 43 info@supercap.it - www.supercap.it
In latest years, Supercap has created new products and materials that have revolutionized the market of closures. Coinjected T-Cap closures have been some of the first to be created by Supercap, which has been the first to produce co-injected closures with wood and metal tops. The peculiarity of this new technology lays in its mechanics for the body being directly injected in the upper part of the closure grants that the product remains unchanged and compact, preventing the head-body splitting, especially when uncorking. Further Supercap’s news is the Pourer No Refill Tec, result of extensive research and in-depth tests. What distinguishes it is a ball mechanism inside the body that
ASIATIC EDITION 2017/2018
42
performs double function: from the one hand, it enables to pour the content finely, and from the other hand, it prevents filling the container with a different liquid, and avoids counterfeit. Alike other Supercap closures, it is available in the following three versions: Basic, Deluxe, and Crystal; this will result in a closure that really makes the difference in terms of quality and innovation. Closures made in the innovative material called Nature are further innovation presented by this company. To the sight and touch, this material conveys the same features of cork. Nature closures can be part of the Wine Caps and T- Caps lines. Nature is glue-free and composed of micro-granules mixed with thermoplastic materials. Its particular glue-free structure avoids dangerous substances from migrating into the wine or distillate inside the bottle. Its structure is that sturdy that prevents any crumbling at the moment of uncorking. Supercap, in cooperation with important Italian universities, is also carrying out laboratory tests on Nature closures and compared them with other micro-granule closures. By improving its production systems and adopting renewable energy sources, Supercap has successfully reduced its consumption, which - in combination with a raw material deriving from natural polyethylene – has created the first Zero Carbon Footprint T- Cap: Supercap ECO®, which features BIObased technology, characterized by renewable polymers of vegetable origin deriving from sugar cane. Supercap’s sustainable approach grounds on the lifecycle of sugar cane, which absorbs a higher amount of CO2 during the photosynthesis than the one released during the whole production process, thus the value of carbon dioxide drops negative. The quality and safety of all products “Made in Supercap” are ISO 22000 and BRC - Global Standard for Packaging & Packaging Materials certified, which are the most advanced and strictly controlled standards in the world.
BEVERAGE INDUSTRY
TMG Impianti Spa
Established in 1976, TMG Impianti has been successful on several global markets, thanks to continuous research and professional experience that allowed the company to gain a qualified technological know-how, to apply in the end of line systems all over the world. The one-to-one contact with the customers is a chance of constant innovation of its packing machineries range, resulting progressively suitable for any needs and different applications. The products range comprises carton erectors, carton packers, carton sealers, palletisers, depalletisers and robots. These machines are often combined together to supply complete turnkey solutions of automated packing systems end-of-line. In the latest years, TMG Impianti has produced many palletizing and packaging
Via Regia, 5 - 35018 San Martino di Lupari (Padova) Italy Tel. +39 049 946 79 11 - Fax +39 049 946 79 00 info@tmgimpianti.it - www.tmgimpianti.com
systems of different products, especially in the beverage and wine sector, in which it has satisfied many international customers’ needs. Nowadays, TMG Impianti produces around 200 palletisers per year and has installed almost 7,000 palletising systems all over the world in 40 years. Technical office TMG Impianti is proud of its state-of-the-art Design Development Department, as it is an expression of creative engineering and extremely high technical value. As a matter of fact, the company managed to patent many of its systems, as all machines are original, advanced and innovative solutions. Simplicity, safety, sturdiness and ease of use are the key aspects TMG Impianti’s engineers never forget. TMG Impianti’s Design Development Department is the ideal partner for customers willing to address specific issues which are to be solved with original solutions. Advanced AutoCAD 3D software is employed, as well as the talent and experience of TMG Impianti’s engineers. Market industries TMG Impianti is specialized in handling bottles and containers, both glass and plastic (like PVC and PET) for the food
ASIATIC EDITION 2017/2018
44
sector, beverage (wine, juices, beer, etc.), chemical and home and care industry (shampoo, detergents, washing powders) and special applications like mineral oil and edible oil. Another important industry where TMG Impianti is present is the “big bags and sacks”. The company is one of European leading companies in the sacks - big bags palletisation with several applications around the world in this industry. More than 40 years of packaging solution TMG Impianti’s 40th anniversary has been a great success. Doubtless this goal has different meanings. If the expertise in the end of line packaging machines is strength and able to satisfy the custom needs of the most important companies all around the world, another key factor in this long path is the passion and the job devotion of the people who are part of this recognized Italian company. With a company business view focused on the future challenges, TMG Impianti’s feeling is “FREE TO BE” as remembered in the 40th anniversary logo’s payoff, free to be what the history has written until today, conscious of the fact that many other pages are going to be written by TMG Impianti’s people.
BEVERAGE INDUSTRY
Velo Acciai Srl
VLS Technologies: the technological partner for the filtration of liquids The markets of wine, beer, spirits, juices and soft drinks are constantly evolving, and the technological solutions adopted for the filtration of liquids require continuous processes of growth aimed at researching, developing and innovating. VLS Technologies is a leading company in the market of the solutions for the filtration of liquids, capable not only of providing technologies for filtration in that specific field, but also of designing and developing customized solutions based on individual needs, new products, new markets. VLS Technologies represents worldwide a single reference point for the client for both the aspect of filtration and more complex needs that involve the whole process of liquid treatment: that is made possible by the production plant in San Zenone degli Ezzelini in the province of Treviso, northeast Italy, as well as by an established worldwide network of agents, authorized reselling and assistance.
Via San Lorenzo, 42 - 31020 San Zenone degli Ezzelini (Treviso) Italy Tel. +39 0423 96 89 66 info@veloacciai.com - www.vlstechnologies.it
The partnership with the client is based on a definitely advisory-oriented approach: an in-depth knowledge of the processes for liquid treatment is a key requirement in order to offer expert advice in the field. Even if it is just about a single machinery that is going to be part of a more complex system. Also design and production are “bespoke” activities based on the client’s needs, realizing customized solutions starting from the analysis of the requirements and characteristics of each single company. Applications can be traditional, as sheet filters or pressure leaf filters, or innovative, as cross-flow filtration systems and reverse osmosis. Innovative technologies guarantee a number of advantages. For example, in cross-flow filtration the liquid is pushed by means of pressure through the particular pores of a membrane: thanks to this system the clients are able to improve the obtained quantity of product, decreasing energy consumption and production costs, for example avoiding the usage of clarifiers and adjuvants. In recent years, VLS Technologies has produced also “exclusive” solutions destined to particular uses or types of clients. Among those Unico filter, a solution designed for small/medium manufacturers who need to filter their products (wines and lees) with a single solution, obtaining a filtered product of excellent quality with
ASIATIC EDITION 2017/2018
46
a turbidity below 1 NTU. That is why VLS Technologies has created Unico filtration system: thanks to its filter, it becomes possible getting a good filtration of the product and reducing the microbiological flora; all of this by saving all the organoleptic characteristics of the product. Its filtering media can stand repeated regenerations with warm water and detergents: this means a longer lifespan. Unico has recently won the “Innovation Challenge Lucio Mastroberardino” at SIMEI Drinktec 2017. Another widely appreciated technology, winner of the New Technology Award at SIMEI 2015, is “Lees-stop”, a solution meant for filtering products with high content in solids that replaces the traditional polymeric membranes of the cross flow filters with sinterized stainless steel membranes. Thanks to several tests, VLS Technologies has verified that this kind of material perfectly fits the cross flow filtration of “difficult” products with about 70% of content in solids. The added value is focused on the capacity to attentively listen to the client, and subsequently to act effectively and quickly: VLS Technologies, also thanks to its 35-year experience in the market, can guarantee a dynamic and flexible approach, realizing long-term partnerships with both medium and small production companies as well as with major brands worldwide. www.vlstechnologies.it
BEVERAGE INDUSTRY
INTERNATIONAL MAGAZINES
.it
ITALIAN TECHNOLOGY FOR THE
BEVERAGE INDUSTRY
ASIATIC EDITION 2017/2018
Supplemento a TecnAlimentaria N°11 Novembre 2017 Poste Italiane SpA Spedizione in Abbonamento Postale D.L. 353/2003 (conv. in L. 27/02/2004 n. 46) art. 1 comma 1 NE/TV - Anno 22 N°11 - 2017 - ISSN 2498-9541