385801SP
Specialist Tool Solutions
960400SP
VENOM Induction Heater Deluxe Kit
THR E
E YE AR
WA RR
ANT
Y
• Generates Invisible Heat® to release corroded and thread locked metal components without the danger of an open flame. • 1 KILOWATT INPUT - 1 KILOWATT OUTPUT Features include: • Angled Design with Trigger: Lightweight, ergonomic design allows for induction heat to access hard to reach places more easily. • Coil Twist Lock: Coils now lock down with one simple turn (no more thumb screws). • LED Usage Indicator: A red LED will light under fault conditions and green LED lights while the trigger is active and the tool is heating properly. • Fault Override Delay: Any event that causes the red LED to illuminate will protect the tool by starting a three second lock out. • Fan Operation Enhancements: The fan continues to run after the trigger is released to aid in thermal cycle time reduction and will stay powered when the thermal switch opens to aid in cooling the tool. • User Controlled LED Switch: As long as the tool is powered and the internal power supply is operating, the LED will remain lit when the switch is on • Three Year Limited Warranty.
£785.00
02700800
Brake Pipe Flaring Tool Master Kit - Imperial and Metric SAE Single & Double Flares: • 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 4.75, 6, 8, 10 & 12mm
DIN Single Flares: • 4.75mm • Bench Mounted • Produces both Convex and Double Lap flares to SAE and DIN standards • Unique Dial-a-Size Turret design • Lever cam operation for quick flaring • Automatic punch extraction from flare • Screw clamp for accurate die alignment
£349.00
90206000
Vibro Impact Air Hammer
£421.00
902130SP
Micro Die Grinder & Bit Set • The latest generation mini composite device for small / fine grinding and milling. • Provides perfect handling due to the Bionigrip anti-slip surface. • Minimal vibration and low noise.
Contents: • Bracket A: 78 “ 130mm (38481200) • Bracket C: 105 - 182mm (38481400) • Strut Vice • Safety Guards
Specifications: • Dimensions: 1600x520x300mm • Working Pressure: 8 bar (116 psi) • Compression Force: 2452 kg (24500N) • Cylinder Stroke: 330mm • CE approved
£2395.00
GO338
Upper Bracket for Spring Compressor
• We have introduced the GO338 Upper Bracket to extend the possible applications of our already successful Coil Spring Compressor. • The bracket is able to adapt to a vast number of applications since it is equipped with a rotating and universal plate with fixing holes and slots. The design is ideal for; • Springs with a small number of coils; meaning that one more coil can always be tensioned automatically. • Simplifying dismantling and assembly operations. • The rotatable and fixable mounting plate is provided with a universal hole division. In addition, the holder between the arms can easily be tilted.
30047500
• Allows the operator to control and gradually increase the force being applied, in order to loosen seized components. • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied. Low vibration for user comfort. • Supplied with a handy wall mounted storage bracket and a set of four Impact Hammers for variable applications. • Air usage: 114 ltrs / min • Stroke: 2200 bpm • Noise level: 100dBA
• Universal piece of equipment for assembling and disassembling struts and coil springs - suitable for Cars, 4WDs and LCV’s. • Automatic jaw levelling pivots to compensate and hold all coil springs including left hand coils. • Safety switch prevents operation when gates are open. • Interchangeable jaws / vice to suit different springs. • Up to 2452kg of force (at 8 bar) at the touch of a pedal. • Full height steel safety gates. • Top arms and jaws adjust and lock to secure spring. • Unique double depth front plate allows safe work on extra long strut assemblies. • 4 x 10mm floor mounting holes for insurance company compliance. • Safety cut-out for de-activation of cylinder when safety guard is opened. • Also Includes: GO338- Upper Bracket for Spring Compressor.
£560.40
• A unique concept to aid the removal of seized suspension parts. • The Vibro-Impact system allows for the controlled application of force via an air powered Impact Hammer.
Specifications: • Weight: 2.49kg • Length: 290mm • Air supply: 6.2bar (90psi)
Pneumatic Coil Spring Compressor
• Exhaust air through hose to the rear. • 70,000rpm. SAVING: £30.00 • Contains five shaped ends suitable for precision work.
£249.95
Wireless Electronic Stethoscope Kit “Chassisear”
• The Wireless Electronic Stethoscope is designed for the detection of vehicle noises e.g. rattles, squeaks and air ingress under load, during a road test and for the diagnosis of a wide variety of potential faults e.g. wheel bearings, CV joints, differentials, transmission, injectors, alternators, water pumps, AC compressors and many more. • Can be used on cars, vans, trucks, buses etc as there are no cable length issues to overcome. • Consists of Receiver Unit, 4 x Transmitter Units (4 channels), 4 pick-up leads, pick-up fixing straps, headphones, batteries, instruction manual & storage case. • Pick-up clamps can be attached to many different parts of the vehicle in order to amplify the sounds made under load and in actual driving conditions. N.B. Due care and consideration should be taken of driving conditions & regulations when operating the Chassisear on the road.
£569.00
Automotive Brochure
JANUARY-APRIL 2024
GO434SP
GO414
Ford Ecoblue Injector Removal Set
Injector Extraction - Mech Basic Kit
• Set of special tools to remove the injector on Ford Eco Blue vehicles. • Provides removal of heavily seized injectors in a professional, safe and fast way. • Non-seized injectors can be removed using the fork and reused as required. • Includes tools for extraction of injectors in single parts if broken.
• This set is required as a base for traditional injector removal tools, such as the slide hammer or hydraulic cylinder. • It contains all the tools needed to breakdown the injector and adapters to connect to injectors. • The injectors can then be extracted with high impact and hydraulic forces. • The set allows you to extract about 90% of all injectors.
Injector extraction: • Complete extraction of non-seized injectors with a special fork. • Advantage: It is not necessary to replace the injector; it can be reused. • Partial extraction of injector with special tools included in the set.
Special Offer - Free GO519 Injector Removal Socket with the purchase of this product, worth - £60
• Special socket for the removal of injectors
Engine codes: • YLFS, YLF6, YMFS, YMF6, YNFS, YNF6, YLR6, YMR6, YNR6
£698.80
GO030
Gen2 Wheel Bearing Master Kit 62-85mm
• Full assortment for correct removal and installation of gen2 bearing hub units on vehicles ranging from passenger cars to transporters. • The perfect set for all current bearing units with diameters of 62 - 85 mm. • Includes a threaded spindle M20 and nut, and a counter-pressure nut with pressure bearing for mechanical operation. For frequent use with large bearing units or badly corroded bearings, we recommend the optional 12-tonne hydraulic cylinder (GO1012). • The special half shells grip behind the wheel hub during installation and press on the snap ring located directly on the bearing outer ring. This prevents damage to the bearing and allows the snap ring to engage evenly. • The repair work can be performed directly on the vehicle. • Easy to use - significant time savings - no damage to the bearing. • Sizes and assignment of half shell sets (HSS). Installation: • 1 x HSS size 1 for Ø 62 mm • 1 x HSS size 2 for Ø 66, 68 mm
• 1 x HSS size 3 for Ø 72, 75, 78 mm • 1 x HSS size 4 for Ø 82, 85 mm
Removal: • 1 x HSS for Ø 62, 66, 68, 72, 75, 78, 82, 85 mm
£1036.90
GO1310
HGV Split Bush Master Kit
• Use this tool kit to remove and refit slotted bushes properly. The slight conical grinding makes it possible to extract and reuse bushes without damage. • The tools can be fitted directly on the vehicle without removing entire axle components. Pieces may also be used on the workshop press. • By using the locking device and relating half-shells, bushes are pre-tensioned carefully and parallel to one another so they can be pressed easily into their seat. While the bush is often damaged using commercial tapered sockets, the assembly operations do not damage/deform/detach from the bearing’s cover when this locking device system is used. • The half-shells are fixed securely inside the locking device so they will not slip out. • The kit includes a wide selection of the most common applications with high market coverage. Other half-shell kits will soon follow to ensure the subsequent removal of the system. • Due to the extremly high forces required for removal, the use of a hydraulic cylinder is recommended. The Govoni 12-ton hydraulic cylinder is therefore optimal for integrations (See kit GO1310R to purchase with the GO1012 Hydraulic Cylinder). Applications: • Ø 75mm MB Actros (stabilizer) • Ø 70mm MAN • Ø 68mm MAN (front spring) ROR, SAF • Ø 66mm IVECO Eurostar (driver’s cabin) • Ø 65mm MB Actros (stabilizer), Atego • Ø 63mm DAF
• Ø 60mm MB/IVECO Eurostar (stabilizer), Renault Kerax, Magnum, Premium (leaf spring eye) • Ø 58mm MB 3229 B, 652, 650/Volvo • Ø 56mm IVECO SAVING: £250.00 Eurostar (driver’s cabin)
£999.00
GO700
£1399.00 Sockets for NOX and Particulate Sensors
GO068
Drive Shaft Disassembly Tool
• It is possible to remove the drive shaft inserted in the gearbox, with the use of this tool. • Insert the tool between the drive shaft and gearbox. Then, with a slight slide hammer hit, the fixing circlip, found in the gearbox, is broken. • The difficult position of the fixing circlip is avoided by the forks central traction, allowing the user to easily unblock the drive shaft.
£249.95
GO563
Injector Extractor- Bosch M18 x 1.5
• Complete tool for the removal of Bosch magnetic injectors. • The half-shells of the tool head are positioned directly under the screw ring of the injector electrical connection. The locking sleeve with window provides a non-slip grip. • Removal is carried out without partial disassembly and this ensures that the injector can be reused. • Connection internal thread M18x1.5.
£339.95
GO1015
Mechadraulic Cylinder Adaptor Kit
• Thanks to the use of aluminium, the cylinder combines the strength of steel with the light weight of this element. • Non-slip grip handle with 12T of force. • There are 4 bores on the body for fastening the cylinder. • Applications include: injector removal; installation of wheel hubs; general use in the loosening of very tight mechanical components. • Adaptors: M10/M12/M14/M16/M18
£606.10
• Allows professional disassembly and assembly of exhaust particle NOX sensors. • The closed 6-point profile allows for very high loosening torques, especially with an extremely locked coupling. • The special design of the socket wrench prevents slipping and damage of the socket profile on the sensor. • The connection cable is lead to the side of the socket and is therefore protected from cuts and incisions. Components: • 1 x 24mm Socket • 1 x 32mm Socket • 1 x 19mm Socket Adapter • 1 x 17mm Socket Adapter Technical data: • Total length 85 mm
• 1 x 14mm Socket Adapter • 1 x 22mm Socket Adapter • 1 x 24mm Socket Adapter
• 1/2” guide
£365.00
GO451
Universal Glow Plug Tip Extraction Set
• Universal Glow Plug Tip Extraction Set - Master M8X1-M9X1-M10X1-M10X1,25. Double Pulling System • For the extraction of the electrode terminal part of the glow plugs (M8, M9, M10) in the event of breakage or sticking inside the seat port, which is otherwise impossible to remove. • The set includes all the tools needed to safely remove the terminal part of the glow plug electrode without damaging the cylinder head. • This operation can be completed with a slide hammer or threaded extractor.
£564.90
0
80062000
Gear Belt Installation/Removal ToolEcoBoost
• Special tool to aid in the removal & installation of gear belts where a torque multiplier is required. Contents: • Torque Multiplier 1/2” Sq Drive Input, 3/4” drive Output • Securing bracket & fixings • Supplied in a storage case with foam Applications: • Ford EcoBoost
£425.00
343001V2
12v Automatic Brake Bleeder - 6 Bar
• Generates a thick and highly visible smoke with multiple adaptors to help connect the product to most vehicles. Specifications: • Rated Voltage: DC12V • Rated Power: 100W • Smoke Output: 20-30L/MIN • Working pressure: 1.3 Bar Delivery (0-18PSI) Includes: • Smoke Leak Detector • Valve Core • Smoke Pipe • Power Cord • Universal Inflatable Adapter • One large, medium and small taper joint • 250ml bottle of smoke oil • Hook
£495.00
240v Electric Brake Bleeder - 4 Bar
£975.00
53380000
• Allows one man operation for brake and clutch bleeding. • Compatible with ABS systems. • Rugged impact resistant moulded housing. • Long supply hose (3.2 metres) allows for use with vehicle raised on a ramp. • Adjustable pressure output from 0 - 4 bar to suit the vehicle. • Large internal storage area for brake fluid containers up to 10 litres. • Includes 34301400 aluminium SP Euro cap - angled screw type for popular vehicle connection. • Additional range of caps also available. • Maximum Pressure: 4 bar. • Weight: 10kg.
SAVING: £50.00
£575.00
34303000
80L Air Operated Oil Extractor
• Pneumatic Oil Extractor for fast recovery of engine oil from any vehicle. • Extraction takes place from the engine sump with oil at 66° C. • Includes six probes for extraction. • Visual indicator of oil for ease of use. • Includes pressure safety valve set at 7.2 bar. Features: • Carbon steel reservoir • Epoxy coated finish • Pneumatic emptying • Drain plug for cleaning and internal inspection • Drain bowl with drain filter grid
Brake Bleeder Cap-Starter Set
• Starter cap bleeder set suitable for ‘343’ & ‘344’ Range of Brake Bleeders. Precision engineered aluminium caps for the following applications: • 34301000 - Ford Fiesta • 34301100 - Nissan / Asian (Bayonet Type Cap) • 34301500 - Euro Cap (Screw Type Cap)
£165.00
34305000
Brake Bleeder Cap Set • Suitable for ‘343’ & ‘344’ range of brake bleeders • 34301000 - Ford Fiesta Cap • 34301100 - Nissan / Asian Cap • 34301200 - Pixo / Matiz Cap • 34301300 - Micra Cap • 34301500 - Euro Standard Cap
Technical Specifications: • Width: 540mm • Depth: 620mm • Height: 1250mm • Bowl Height (from Reservoir): 580mm Includes 4 quick-fit adaptors for models with integrated suction tubes; • Mercedes • BMW • Volkswagen • PSA
£389.00
02688000
£279.00
53380500
80L Air Operated Oil Extractor with Viewing Chamber
• Pneumatic Oil Extractor for fast recovery of engine oil from any vehicle. • 10L Plastic Viewer. • Extraction takes place from the engine sump with oil at 66° C. • Includes six probes for extraction. • Visual indicator of oil for ease of use. • Includes pressure safety valve set at 7.2 bar.
MOT Approved Headlight Beam Tester - HGV
• Mechanical Headlight Beam Testers - MOT Approved. • Features rotating column with adjustable mirror visor for accurate alignment to vehicle. • Luxmeter with graduated analogue scale for accurate light intensity measurement. • Easily adjustable vertical sliding mechanism by self lubricating sliders. • Features built in MOT beam checking panel. • Suitable for all headlight types including Xenon. • 5.2 metre rail kit / column height: 1.66m.
Features: • Carbon steel reservoir • Pneumatic emptying • Drain plug for cleaning and internal inspection • Drain bowl with drain filter grid Technical Specifications: • Width: 540mm • Depth: 620mm
• Base mounted on double rail for ease of use (self install only) • Includes a kit to make 2 x 5.2 metre rails (6 x 1.50m + 2 x 0.70m)
Smoke Diagnostic Machine
34400500
• Updated Model - Now includes regulator from 0 to 6 bar and 4 x wheels (2 x front swivel).
• Allows one man operation for brake and clutch bleeding. • Compatible with ABS systems. • 12v powering with reverse polarity warning. • Stainless steel body. • Includes pump with automatic shut off valve. • 5L reservoir with visible (min) level indication. • Auto power OFF when min level reached. • Large reservoir opening for easy cleaning. • Includes aluminium SP Euro cap - angled screw type. • Power cable for brake fluid with quick coupling system (Length: 4m).
53400800
£879.00
• Height: 1250mm • Bowl Height (from Reservoir): 580mm
Includes 4 quick-fit adaptors for models with integrated suction tubes; • Mercedes • Volkswagen • BMW • PSA
£499.00
31470000
331595V3
Oil Pressure Test Kit • Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and pressure warning indicators. • Shock protected dual scale gauge, for quick and accurate oil pressure checks. • Permanently oil primed, long flexible hose, enables access to difficult to reach oil switch ports. • Small profile, quick coupling adaptors with built-in shut-off valve for a fast and secure connection. • Includes oil pressure test gauge c/w 1m oil primed hose and 10 x oil switch port adaptors. • Supplied in plastic case with foam insert. Specification: • New M12 x 1.75mm adaptor available to suit engines commonly found on newer GM, Vauxhall & Opel models 31472270 • 1m flexible oil primed hose • Gauge Scale 0 - 10bar, 0 - 150psi • Gauge Diameter: 80mm • Gauge to DIN16005, DIN16063, BS1780 standards
£259.95
Unbreakable* Vice - Fixed Base
• High quality, heavy duty construction provides years of trouble free use. • CNC machined components for excellent fit and durability. • Hardened and tempered finely ground jaws for superior grip. • Scratch resistant hammered blue finish. *Excluding jaws and handles - replacements available. PART NO
SIZE (INCH)
PRICE
53320400
4”
£72.95
53320600
6”
£112.95
53320800
8”
£155.00
Swivel Base for Unbreakable Vice
533204-B
4”
£11.95
533206-B
6”
£18.95
533208-B
8”
£21.50
£345.95
08070000
£162.95
33100000
Universal Digital Pressure Tester Comprehensive Kit
• Universal Digital Pressure Tester - full kit for standalone use - all possible applications. • Save, export, print and share results for selected applications.
33100100
Diesel High Pressure Kit
• For use with 33100000 - Universal Digital Pressure Tester - Comprehensive Kit. • Easily and safely test the diesel common rail pressure. • Safely test the diesel common rail pressure, both in line (in series with engine running) and for direct pump pressure (cranking the engine). • Instead of the pressure information provided by the car’s sensor that may have an issue, this set provides all hardware (special sensor, plugs, hoses) to perform a precise and accurate test when used with the 33100000 Digital Pressure Testercomprehensive kit. • The hoses included in the set will allow measurement and diagnosis on most usual common rail engines.
£499.00
33100500
Possible Applications: • Compression - Petrol/ Diesel • Oil Pressure** • Turbo Pressure • Cooling System Pressure
• Ad Blue Pressure • Fuel Low Pressure • Vacuum Pressure • Particle Filter Pressure
Full Kit Contents: • Tester • Sensor 0 to 300Bars • Sensor 1 > 3Bars • Universal Diesel Compression Adaptor • Universal Petrol Compression Adaptor • Eight specific professional quick coupling adaptors • Vacuum adaptors • **Adaptors required for entry via oil pressure sensor.
Common Rail Dummy Regulator Set
• For use with 33100000. • Kit includes 8 different dummy to seal any regulator ports. • This set, when used with 33100100, will allow bypass of the pumps regulator and measure the pressure to diagnose any regulator or pump issue.
Applications include: • Vauxhall: Adam, Astra J, Cascade, Corsa E, Meriva B, Mokka & Zafira Tourer C • Saab: 9-5 2010• BMW 4.4/4.8/6.0 engines: 5 Series (F07/10/11) 2010- , 6 Series (F06/ F12/13) 2011- , 7 Series (F01/02/03) 2009- , X5 (E70) 2008- ,X6 (E71/E72) 2008 and BMW i3 2013• Mini models: F54, F55, F56, F57, R50, R52, R53, R56, R57, R58, R59 & R60
Specification: • Jaw Opening: 70mm • Jaw Throat Width: 36mm • Jaw Throat Depth: 50mm
• Allows 360° rotation of Mechanics Vice for better access. • Lockable to most convenient angle. PRICE
Includes: • Hand Pump with Pressure Gauge & Quick-Release fitting • Hose Assembly c/w quick-release fitting • 16 x Threaded cap adaptors • 3 x Bayonet Fitting cap adaptors • 1 x Cap Adaptor wrench
• Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied. • Can be upgraded to hydraulic power (use 08075000 Upgrade Kit).
Universal jaws available for any vice with the corresponding jaw size.
SIZE (INCH)
• Provides an effective solution when pressure testing the cooling system to help locate internal and external leaks. • Updated kit now includes caps to cover the latest applications for Vauxhall / Saab and BMW / Mini vehicles. • Suitable for modern vehicles with in-built overflow at the top of expansion tank.
HGV Ball Joint Separator
SAVING: £8.95
PART NO
315’ Series Cooling System Pressure Test Kit
33100300
Petrol High Pressure Adaptors
£139.00
33100400
Common Rail Cap Set
• When used with the 33100100, this set will allow closure of fuel inlet injectors directly on the common rail to identify whether an injector is leaking or not. • Works for 3, 4, 5 & 6 cylinder engines. Includes: • 6 x M12x150 plugs • 6 x M14x150 plugs
£62.95
£1599.00
33100700
Diesel High Pressure Adaptors
• For use with 33100000. • Use this kit with the 0-300 bar sensor included in kit, 33100000, to test the high pressure of most popular petrol engines.
• For use with 33100000. • When used with the 33100100 - Diesel High Pressure Kit, the diesel high pressure of most popular cars on the market can be tested.
Kit includes: • HP1 = M12x150 • HP2 = M12x125 • HP3 = M14x150 • HP4 = M10x100 • HP5 = M8x100
• All adaptors feature a M12 x 150 thread, the others ends are as follows; • M12x125 (2x) • M14x150 (2x) • M14x100 (1x) • M16x100 (1x)
£114.00
£415.00
0
341200SP
341400SP
Gigalithium Booster 12V
Gigalithium Booster 12/24V
• The lithium booster is a powerful and ultra-light booster for professional use - The GIGALITHIUM boosters is suitable for difficult starting vehicles to start but can also be used to protect/remember the memory of vehicles. • Longer life span, no maintenance, extremely safe, lightweight, improved discharge and charge efficiency. Specifications: • Operating Voltage: 12/24V • Continuous Current: 2000/1000A • Start Max Ampertage: 5000/2500A • Peak Amp: 10000/5000A • Clamp Output: 1000A • Cable Length: 160cm • Cable Size: 25mm • Maximum Charge Voltage: 14.5V • Automatic Battery Charger: 14.5V • Battery Type 2 Pack Lithium: LiFePo4
• Reverse Polarity Protection: Yes • Short Circuit Protection: Yes • Overvoltage Protection: Yes • Memory Saver: Yes • Dimensions: 350 x 240 x 140 • Weight: 5KG
£1350.00
The Giga Lithium booster 12V can handle all vehicle using a 12V battery and with up to 40 starts on a charge. Specificactions: • 4 cells Lithium LiFePO4 battery 100% safe • Cranking Amps: 800CA • Lightweight • LCD Screen • Microprocessor controller • Reverse Polarity Protection: Yes • Short Circuit Protection: Yes • Overvoltage Protection: Yes • Memory Saver: Yes • Protection again over discharge • Protection against over charge • Protection against over temperature • Over ride mode • Cable Length: 50cm • Cable Size: 10mm
£699.00
03204500
12V/24V Battery Tester & Printer
• Designed for 12V & 24V battery, starter, alternator and ground tests. • Compatible with WET, AGM, EFB, GEL, SPIRAL batteries. • Features an integrated thermal printer (+ 1 spare paper roll). • Equipped with a full colour interface, LCD display, touchpad with sensor technology. • Offers the possibility to type in the customers details.
• Supplied with a SD Memory card for storing the test reports. • A QR code is printed with each test report. Simply scan it to share the test results. • New added function: keeps track of how many tests are done daily for each test category. • Optional cigarette lighter socket cable to test the alternator directly through the 12V plug of a vehicle.
£369.00
Battery Chargers
• Designed to charge and maintain and recover all types of lead-acid batteries. • The intelligent charging process allows the charger to be left permanently and safely connected to a battery to provide continuous maintenance once charged. • The charger comes with three charging accessories: clamps, eyelets and cigarette lighter connector. • An easy to read display with LED’s shows the charging status in % as well as the selected mode.
PART NO
CHARGING CAPACITY
MAINTENANCE CAPACITY
CABLE LENGTH
DIMENSIONS
WEIGHT
PRICE
896122425SP
50-450Ah (12V) / 25-230Ah (24V)
Up to 500Ah
187cm
29 x 12 x 7cm
2.2kg
£244.95
89612247SP
14-150Ah (12v) / 14-75Ah (24V)
Yp to 225Ah
180cm
206 x 88.5 x 52mm
0.7kg
£85.50
8961238SP
1.2-14Ah (6V) / 1.2-75Ah (12V)
Up to 120Ah
180cm
175 x 65 x 43.5mm
0.46kg
£64.95
PART NO
INPUT
POWER
BATTERY CAPACITY
CABLE LENGTH
DIMENSIONS
PRICE
8961211SP
220-240VAC 50/60HZ
30W
2.2-40AH (6V) / 2.2-40AH (12V)
180cm
153 x 59 x 38mm
£53.95
8961211SP
896122425SP
89612247SP
SPEEDLINE3100
8961238SP
SPEEDLINE3200
Booster Pack 12V AGM
Booster Pack 12V AGM
Specifications: • Voltage 12V • Battery Capacity- 25AH • Cranking Amps / Peak Amps -1200 CA/ 3100 PA • Cable length / cross-section- 70 cm / 25mm² • Automatic charger -12V-2A • Clamps full insulated -brass clamps • Cigarette-lighter socket - included • Short-circuit protection fuse- 300A Fuse Built in clamp
Specifications: • Voltage 12V • Battery Capacity- 25AH • Cranking Amps / Peak Amps -1200 CA/ 3100 PA • Cable length / cross-section- 84CM/25MM² • Automatic charger -12V-2A • Clamps full insulated -brass clamps • Cigarette-lighter socket - included • Short-circuit protection fuse- 300A Fuse Built in clamp
£399.00
SPEEDLINE6200
SPEEDLINE5000
Booster Pack with Trolley 12/24V AGM
Booster Pack 12/24V AGM
Specificactions: • Voltage- 12/24V • Battery Capacity- 2 x 22Ah • 2000/1000 CA - 5000/2500 PA • Cable length / cross-section- 130 cm / 50mm² • Automatic charger- 12V-3A • Clamps- Fully insulated brass clamps • Cigarette-lighter socket- Included • Short-circuit protection fuse- 500A fuse built in clamp • Voltmeter- Colour-coded LEDs (battery level + alternator status)
£599.00
SAVING: £50.00
£849.00
Specifications: • Voltage- 12/24V • Battery Capacity- 2 x 25Ah • Cable length / cross-section- 155 cm / 50mm² • Automatic charger- 12V-3A • Clamp- Fully insulated brass clamps • Cigarette-lighter socket- Included • 2400/1200 CA - 6200/3100 PA • Short-circuit protection fuse- 500A fuse built in clamp
£999.00
Motorq Split Torque Wrenches
• Split Torque Design - The new generation design can be split into two parts for easy and economic storage and shipping. • New Torque Scale. • Push-through ratchet allows two directional torquing. • Robust construction gives accurate results to ±4% even in arduous working conditions. • Tool is supplied with a Declaration of Conformance which meets the requirements of ISO 6789-1:2017. • Unique profiled cam ad reaction plate - gives much clearer torque signal and the large break angle greatly reduces the possibility of over torquing. • Designed to be cost effectively serviced. • New handle - more comfortable and guides operators hand to correct position. • Easy to read scale is shielded from dust, dirt and spray. • Easy to set accurately - setting tool included.
PART NO
DESCRIPTION
80240000
CALIBRATED RANGE
PRICE
N-M
LBF-FT
3/4” Sq. Dr
200-800
150-600
£598.00
80250000
3/4” Sq. Dr
300-1000
200-750
£615.00
80250500
Stepped 3/4” to 1” Sq. Dr
300-1000
200-75
£640.00
Motorq Push-Thru Professional Torque Wrenches • Accurate to +/-3% of reading which meets the requirements of ISO 6789-2:2017. • Supplied with a traceable calibration Certificate allowing end-users to adhere to more stringent quality control processes. • 60% larger scale for better visibility and improved accurate setting. • Scale adjusts 40% faster but the effort required to adjust is reduced. • Improved serviceability means longer life and reduced ownership costs. • Superior, ergonomic handle and shape - Soft-feel, high grip material and more comfortable to use. • Now includes a push/pull type lock - Faster use and the coloured band on the lock clearly shows that the wrench is unlocked. • New Timestrip® Feature - Timestrip® provides a visual indication that the wrench is due for re-calibration and has 3, 6, 9 and 12 month graduations. PART NO
DESCRIPTION
80105000
CALIBRATED RANGE
80105000 80110000 80120000
PRICE
N-M
LBF-FT
3/8” Push Thru
10-50
7.5-37.5
£199.00
80110000
1/2” Push Thru
20-100
15-75
£190.00
80120000
1/2” Push Thru
40-200
30-150
£207.00
80130000
1/2” Push Thru
60-300
50-220
£233.00
80134000
1/2” Push Thru
60-340
50-250
£249.00
80140000
3/4” Push Thru
80-400
60-300
£349.00
80130000 80134000 80140000
SPEEDLINE Torque Wrenches
• Accurate to ±3% of reading which meets and exceeds ISO6789:2003. • Light and fast adjustment saves operator time and effort. • Micrometer scale applying to the primary torque units (N.m on a dual scale wrench) for simple and error free setting. • Push through ratchets allow torque control in both the clockwise and anti-clockwise directions. • Tough ratchets with narrow engagement angles allow for easy positioning of the tool in confined spaces. 5° for models up to 200 N.m and 6° for models 300 N.m and above • Pull/push lock is fast and intuitive to use and prevents accidental adjustment of the set torque • Convenient hanger feature for tool storage also aids wrench unlocking and adjustment.
PART NO
DESCRIPTION
SPEEDLINE60
CALIBRATED RANGE
SPEEDLINE60 SPEEDLINE100 SPEEDLINE200
PRICE
N-M
LBF-FT
3/8” Push Thru
12-60
10-45
£153.00
SPEEDLINE100
1/2” Push Thru
20-100
15-75
£159.00
SPEEDLINE200
1/2” Push Thru
40-200
30-150
£169.00
SPEEDLINE300
1/2” Push Thru
60-300
45-220
£178.00
SPEEDLINE340
1/2” Push Thru
60-340
50-250
£195.00
SPEEDLINE300 SPEEDLINE340
Evotorque® Battery Tool
• The EvoTorque® Battery Tool (EBT) is a fast, reliable and accurate battery torque tool which features a brushless motor, data memory and data transfer capabilities. • Test and record the torque on every bolt. • Keep full electronic records for your fleet. PART NO
DESCRIPTION
SQ DRIVE
CALIBRATED RANGE
TOOL WEIGHT*
REACTION WEIGHT
OUTPUT SPEED
PRICE
180349
Single Speed
180541
EBT-92-4000
3/4”
100-800nm
6.2kg
3.7kg
11.2rpm
£8,008.24
1”
400-2700nm
5.9kg
1.4kg
3.3rpm
£8,774.10
180637
EBT-80-2700
1”
800-4000nm
7.9kg
2.5kg
2.3rpm
£9,016.15
180469
Auto 2 Speed
1”
338-1350nm
6.2kg
1.4kg
32rpm
£9,277.41
180565
Auto 2 Speed
1”
400-2700nm
6.5kg
1.4kg
13rpm
£9,840.92
180661
Auto 2 Speed
1”
800-400nm
8.5kg
2.5kg
9.5rpm
£10,082.98
*Tools weight excludes reaction and battery. Battery weight is 0.8kg.
21027500
HGV Hub Puller Kit
• Variable for pitch circle diameter up to 445mm. • To suit wheel stud sizes commonly found on DAF, MAN, MERC, RENAULT, SCANIA & VOLVO models. Contains 5 x thread adaptor pairs; • M18 x P1.5 x 65mm/L • M20 x P1.5 x 65mm/L • M22 x P1.5 x 65mm/L • 7/8” - 11 BSF • 7/8” - 14 UNF
£745.00
331400V2
Cooling System Pressure Test Kit
Updated kit now includes additional caps. Contents: • 10 x Reservoir & Radiator Pressure Caps • High capacity metal bodied hand pump • Quick-Connect Hose Assembly • Dual Gauge measures both p.s.i (0-35) and bar (0-2.5) • Additional Pressure Caps available - refer to applications guide Applications include: • DAF / Iveco / MAN / Mercedes / Renault / Scania / Volvo plus wide ranging coverage for Plant / Construction / Military & Agricultural solutions
£319.95
53380400
33145500
Combustion Leakage Tester-HGV • Quick test combustion leakage tester. • Fast and accurate diagnosis of cylinder head gasket leaks. • Suitable for use with both petrol & diesel HGV engines. • Supplied with standard and sensitive reaction test fluid (100ml). • 25 to 50mm cone.
£119.95
Pit Bridges
120L Oil Extractor with Under-Vehicle Tray • Pneumatic equipment for fast recovery of engine oil from any vehicles. The oil change may take place by gravity, or by aspiration from the engine sump, with hot oil (70/80 ° C) through one of the 6 included probes. Simple to use, the equipment is provided with a pressure relief valve set at 4 bar. The device is manufactured in compliance with EC rules.
• Adjustable width, making it suitable for most pit distances. Technical Information: • Width: 870-1150mm • Loading Capacity: 400kg Available with and without handrail
• Carbon Steel Reservoir • Epoxy Coated Finish • Pneumatic Extraction • Drain plug for cleaning and internal inspection • Metal drip tray with drain fiter grid Technical Specification • Tray - 51L • Air Inlet Connection - 1/4 • Air Consumption - 200 l/min • Noise level - <80 (dB) • Weight - 83kg • Reservoir Operating Pressure - 4 bar • Capacity - 120l
£899.00
53401300
51060500 -Rail Type
PART NO.
DESCRIPTION
PRICE
51050500
Flat Type - with Handrail
£795.00
51060500
Rail Type - with Handrail
£799.00
51050000
Flat Type - without Handrail
£599.00
51060000
Rail Type - without Handrail
£589.00
51050500 -Flat Type
53407500
Coolant Flush Machine
Ecomax Dual Service Equipment
Features: • Dual-manual valve design, easy operation. • Directly connect shop air,zero failure. • Whole work process visible through fibre glass tanks • Support off/on-vehicle exchange. • Full coverage adaptors (covering more than 90% vehicles on the market.
• A 6 in 1 cleaning system that removes problematic deposits from combustion chambers, injectors, throttle body, inlet valves, EGR, manifolds and DPF. • Effective cleaning for petrol and diesel engines, eliminating the need for injector removal. The Injector Max system cleans and restores original fuel flow, allowing maximum fuel efficiency.
Specifications: • New and used oil capacity: 15L • Pressure gauge: -1-5 bar • Max. work pressure: 3 bar • Length of return/out hose: 3m • Coolant hoses: 25mm, 32mm,38mm, 42mm, 45mm, 60mm, 67mm Functions: • Used fluid extraction Vacuum • Add new fluid • Empty new/used fluid tank
£1795.00
KM Sockets and Extension Tube Kits
• Designed for easy tightening and loosening of locknuts. • They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. • Easy mounting and dismounting without nut damage. • The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2” drive. PART NO
DESCRIPTION
KIT INCLUDES
PRICE
69680000
KM Socket Set
KM 4 - KM 10
£259.00
69680100
KM socket & Extension Tube Set
KM 4 - KM 7
£299.00
69680200
KM Socket & Extensions Tube Complete Set
KM 4 - KM 10
£599.00
Features • Dual Tank – Avoids cross contamination of fluids. • Robust and reliable workshop quality machine • Air operated and simple to use • Universal fitting kit • Suitable for petrol and diesel engines • Fluids premixed and ready to use After Service Benefits • Cleans DPF and Catalytic filters on vehicles • Reduces exhaust emissions • Restores fuel economy and engine performance • Removes carbon deposits • Cleans injectors
£2995.00
Hub Socket Range
Vehicle Applications Include: • Scania • DAF • Iveco • MAN • Renault • Mercedes • Volvo • BPW • Fiat • Fruehauf
• R.O.R • TGA • S.A.F
FOR FULL RANGE VISIT: WWW.SYKES-PICKAVANT.COM
‘Silver Series’ Hydraulic Workshop Presses
Hydraulic Press Accessories
• NEW Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic ram back-run system and V blocks. Specifications: • Heavy duty steel frame • Piston over-travel limit stop • Automatic ram return • Delivered ready for use • Manufactured in the EU • Overload safety valve • Two speed pump • V blocks • Pressure gauge • New gauge position to enable easy • Fully adjustable horizontal ram reading of pressure movement • Winch for table*
PART NO.
15T, 20T, 30T & 50T rated models available WIDTH (MM)
DEPTH (MM)
BED DEPTH (MM)
PART NO.
RATING
HEIGHT (MM)
RANGE
WEIGHT (KG)
PRICE
53436010
15T
1930
920
650
170
85 - 950
150
£925.00
53436210
20T
2030
940
650
170
65 - 1030
165
£999.00
53436410
30T
2060
1120
650
200
115 - 1020
230
£1599.00
53436510
50T
2290
1220
650
210
70 - 1065
370
£2649.00
DESCRIPTION
53452200
Universal Press Ring
£99.95
534551V3
Universal Press Guard V3
£239.00
53451500
15T Press Piece Set
£119.95
53452000
20T Press Piece Set
£129.95
53453000
30T Press Piece Set
£139.95
53455000
50T Press Piece Set
£159.95
53451600
Universal Tray (up to 50T)
£106.00
53451300
30T Press Plate
£99.95
53451400
50T Press Plate
£129.95
534360-16
Pedal Kit - 15T/20T/30T
£299.00
534362-16
Pedal Kit- 50T
£299.20
Accessories Box
£13.95
53451200
N.B. A standard delivery charge of £55 will apply within the UK with extra charges applicable for delivery outside of the UK. Contact Customer Services for further details.
PRICE
SAVING: £30.30
*For models 53436410 & 53436510
GO1501
GO1500B
EV Battery & Transmission Lifting Table 1500kg
M10 Spacer Kit (15pcs)
• Universal lifting table with a load capacity of 1500kg (1.5T). • Powered by compressed air. • Sliding cover, allowing convenient battery installation or removal. • High ground clearance makes it compatible with all workshop cranes on the market. • Extendible and tiltable top table, by means of a mechanical screw. • Easy to operate and tilt with self explanatory operations. • The table features holes with M10 thread, which can be used to mount all types of supports or accessories, including special hooks, brackets, and protective mats for battery packs. • Button operated table lowering. • Rack safety system, when not being operated, the table locks by means of a mechanical anti-lowering safety wedge.
• For use with EV & Transmission Lifting Tables GO1000B / GO1500B / GO1500T. • Spacers can used to raise the battery or transmission off the tale to allow access to the underneath for removing bolts etc. • Allow you to avoid battery contact with the metal table and so prevents arcing. • Allow for easy access for straps to lift the battery off the table when full battery replacement is required.
£190.00
£6500.00
*Photo of the GO1500T for demonstration purposes.
GO1503
92975000
Battery Lifting Accessory Kit
• Required to hold battery pack on the platform, safely. • The components fits perfectly to the different types of batteries, taking into consideration the possible specifications of the manufacturer. • Slotted holes in the foot allow an easy changing/moving of the platform. • The support columns are height-adjustable and have a thread for screwing the rubbers/spacers. • Used for platforms with M8 and M10 threaded holes. Specifications: • Support foot length: 200 mm • Maximum capacity for each support: 100 Kg • Minimum height: 215 mm • Threads used for top fixing: M8 • Maximum height: 315 mm • Fixing screw: M8 • Usable key for upper pin: SW32 mm • Fixing screw: M10
EV Battery Lifting Hoist
• Max capacity 1.5T. • Adjustable between 650mm and 2250mm. • Works with standard engine crane. • Includes leveling device for safe lifting.
£1299.00
£1320.00
NEW! Induction Heaters
• Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. • The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. • It allows you to work in close proximity to heat-sensitive parts.
Heat inducers are ideal for a wide range of applications such as: • Releasing seized/heavily • Preheating before welding corroded bolts/nuts • Bending • Remove or replacing pins or • Thermal applications bearings GO1474 • Heating for straightening
PART NO.
DESCRIPTION
INPUT POWER
VOLTAGE
FRQUENCY
WORK CYCLE
PRICE
GO1470
Induction Heater with Inverter 18KW
18KW-32A
400V 3PH+T 50
15-30khz
N/A
£7999.00
GO1471
Induction Heater with Inverter 13KW
13KW-32A
400V 3PH+T 50
15-30khz
N/A
£7199.00
GO1472
Induction Heater with Inverter 8KW
8KW-16A
230V 3PH+T 50
15-30khz
N/A
£6695.00
GO1473
Induction Heater with Inverter 5KW 3 Phase
5KW-16A
400V 3PH+T 50
15-30khz
30 min*
£4399.00
GO1474
Induction Heater with Inverter 2.7KW
2.7KW-16A
230V 3PH+T 50
15-30khz
9 min*
£2199.00
GO1475
Induction Heater with Inverter 5KW Single Phase
5KW -16A
220V 1PH+T 50
15-30khz
30 min*
£4199.00
GO1473 *± 5% ambient temperature maximum power
www.sykes-pickavant.com 01543 679900 Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE COPYRIGHT 2024 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED. PART NO: SPQ124GBP