HIGH PERFORMANCE SOLUTIONS
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale for comparison measurements.
• Large and clear LCD readout.
• Smooth slider movement makes for comfortable operation.
• 20,000 hours battery life expectation.
• Can measure outside and inside dimensions, depth and steps.
• Use SR44 battery only
• 0.01mm resolution
• Metric and Imperial display
A rapid action, waterproof Mitutoyo digital micrometer that enables measurements to be made several times faster than a standard micrometer. The highly stable frame incorporates a heat shield to preserve accuracy over extended measuring sessions. A ratchet thimble guarantees repeatable measurement.
Technical Data
Dust/Water protection level: IP65
Accuracy: Refer to the list of specifications
Resolution: 0.001mm or .00005”
Flatness: 0.3µm/.000012”
Parallelism: 1µm/.00004” for models up to 50mm/2”, 2µm/.00008” for models up to 100mm/4”
Features:
• Ratchet Stop
• Friction thimble for exact repetitive readings
• Hammertone-green, OUTSIDE MICROMETERS
DEPTH MICROMETER SET
A Mitutoyo non-digital depth micrometer using interchangeable measuring rods to cover a wide measuring range. The 100mm base is made from tool steel, hardened and ground with a micro-lapped reference surface.
• Bezel clamp and lifting lever (optional) can be attached to either right or left side. They can be easily installed and removed without tools.
• No through screw holes on the frame as well as the use of an O-ring prevents water or oil penetration.
Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
Vernier scale in metric units for taking precise inside dimension (ID) measurements.
Includes interchangeable extension rods for a diversified range of measurement.
• Enhanced durability, sensitivity & visibility.
• Glare-free flat crystal face.
• O-ring seal on the bezel has the effect of providing smooth rotation and prevents dust and oil from penetrating through to the dial face.
• Multi-layer coatings on the crystal. • Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
• It comes with large and smooth-acting slider hand wheel
• A carbide-tipped scriber is provided
Introducing the NH+ Tap Series: The Next Step in Machining Excellence
NH+ represents a leap forward in material performance, geometry, and coating technology. After 18 months of focused development and investment across our facilities, we’re proud to deliver a range that offers superior tool life, improved chip control, and greater versatility.
At the heart of NH+ is HSSE-PM , a premium powder metallurgy substrate known for its hardness, toughness, and thermal resistance. This ensures each tap performs reliably, even in demanding applications and tougher materials.
Advanced proprietary coatings reduce friction, enhance wear resistance, and support excellent chip evacuation—contributing to cleaner threads and extended tool life. Our refined universal geometry means NH+ taps deliver consistent results across a wide range of materials from general steels to harder steels upto 42HRC, but also stainless steels, cast irons & even aluminiums.
Behind the scenes, every NH+ tap has undergone rigorous in-house testing, from material analysis to geometry optimization, ensuring uncompromising quality and consistency.
Whether you’re chasing higher productivity or looking for a tool that won’t let you down, the NH+ Tap Series is designed to help you push the limits of performance.
Experience the difference with NH+, where innovation meets precision.
Originally developed for Normal to Hard materials, the NH tap series has now evolved. — thanks to our ongoing product improvement program; into the all-new NH+
T840 • SPIRAL POINT (GUN)
• Suitable for harder materials up to 42 HRC
• Through holes
• Depths up to 3 x d1
• Suitable for harder materials up to 42 HRC
• For Blind holes
• Depths up to 3 x d1
Cobalt based PM HSS grade for high wear resistance
THREAD FORMING TAPS - MULTI COOLANT GROOVE - N
161 SOLID CARBIDE 90° 4 FLUTE CHAMFER MILL
• Universal 4-5 flute 90° chamfer mill.
• Especially suited for chamfering de burring and countering.
• Capable of machining a variety of materials, AlTin coated.
• 4 Flute Unequal Pitch Endmill & with corner chamfer, making it the most versatile endmill in our range.
• Unique end gash design provides ramping up to 45° in soft steels
• Latest generation TiSiNos coating, offers longer tool life in more materials
NEW
DOSATRON PUMP EMULSIFIER
The Dosatron pump (D3|L10VF) is integrated into the water circuit and utilises the pressure and flow of the water as its sole source of power. Driven in this manner, the Dosatron can dose various types of additives directly into the metalworking fluid supply to one or several conventional or CNC machines.
The precision and reliability of the Dosatron pump eliminates any risk of errors in the dosing and preparation of products such as mixtures and solutions. It is not affected by the inherent variations of afluid (pressure, flow rate, temperature, inlet height and viscosity). Constant attention to quality at all stages of the pump’s manufacture, both in terms of the materials used, testing and inspection procedures applied, ensures an optimum response to the needs of metalworking machine tool users.
$1,890.00 205 LITRE DRUM $227.50 20 LITRE PALE 2831168 WAS $2,700.00 2831166 WAS $325.00 TECHNICAL SPECIFICATION
$1,995.00
CIMCLEAN 30
Coolant System Cleaner
Recommended for cleaning individual machine and central system reservoirs, metalworking fluid lines, premix tanks, machines and parts. It improves rancidity control by removing bio-films, dirt, grit, chip-deposits, insoluble soaps and oils. Contains corrosion inhibiting ingredients to protect machines and parts (cast iron and steel) from rusting during cleaning.
CIMCLEAN® 30 can also be used for general purpose floor cleaning. Use at 1:100 (1%) to 1:25 (4%). Can be used in power washers, steam cleaners and automated floor scrubbers.
MILCOOL 1311
High Performance Metalworking Fluid
MILCOOL®1311 is a heavy duty, soluble metalworking fluid blending the reliability of traditional soluble fluids with industry leading technology to deliver performance which meets the market. MILCOOL®1311 is developed for all operation machining, sawing and grinding of steels, stainless steels, alloy steels and most aluminiums.
APPLICATION:
MILCOOL®1311 is recommended for turning, drilling, milling, reaming, boring, tapping, roll/ form tapping, broaching, sawing and most grinding applications. It should not be used on magnesium alloys.
CIMPERIAL 1070
Mineral
Soluble metalworking fluid recommended for a wide variety of heavy duty machining and grinding operations “one fluid for all operations”. Suits both individual machine sumps and central system applications.
METALS:
Carbon Steels, High Speed Steel, Cast Steels, Alloy Steels, Tool Steel, Stainless Steel, Cast Iron, Aluminum, Bronze, Brass & Copper Metals. Duty Range: Moderate to heavy-duty operations.
CIMSTAR 70HFP Semi Synthetic
Recommended for high fluid pressure and high volume. Flow applications where minimization of foam is critical. It can be used for machining and grinding operations of ferrous and some non-ferrous materials, chlorine free.
METALS:
Most aluminum alloys, cast iron, nodular iron, carbon steels, high speed steels, high alloy steels, stainless steels, most non-ferrous alloys. For moderate to heavy-duty operations
CIMSTAR 585P
Metalworking Fluid
CIMSTAR® 585P is a premium semi-synthetic metalworking fluid designed for moderate to heavy-duty machining of ferrous and non ferrous materials. CIMSTAR® 585P can be used in central coolant systems or individual machine sumps.
METALS:
Most aluminum alloys, cast iron, nodular iron, carbon steels, high speed steels, high alloy steels, stainless steels, most non-ferrous alloys. For moderate to heavy-duty operations
CIMGLIDE 68 Slideway Oil
CIMGLIDE® 68 is a specially formulated MACHINE TOOL lubricant for all horizontal slideways. Meeting the Cincinnati Machine P47 Specification, it combines mineral oil and extreme pressure additive to assist in eliminating stick-slip to ensure machines run at their optimal performance. Suitable for use in the following machine tool applications:
• Horizontal slideways, feed mechanisms
• Tables, gear boxes & hydraulic systems
• CIMGLIDE® 68 is designed for minimal impact on water based metalworking fluids.
RAPID TAP CUTTING FLUID
Greatly extended tool life. Super-fine machined finish in operation after operation. Anti-mist protection for a healthier work environment. Excels in tough materials. Contains no 1,1,1- trichloroethane or other ozone depleting chemicals.
A9 ALUMINIUM CUTTING FLUIDFLUID
Eases all operations on aluminium: milling, broaching, drilling, threading, tapping, reaming, sawing, etc. Contains anti-mist component for a healthier work environment. Contains a scientific blend of chemicals that asurfaces, forming an extreme-pressure boundary lubricant between tool & work surface.
DEAD BLOW HAMMERS
• Shot loaded interior produces a more controlled striking force without rebound.
• Non-marring, non-sparking.
• Resistant to industrial chemicals.
• Moulded in one piece of urethane for increased safety.
With two-jaw chuck for clamping square shanks. Moveable T-handle with a grooves centred and at each end for engaging the retaining ball. Holder with stainless steel sheath. Ratchet is reversible and can also be locked. All-steel construction for high torque applications. Clamping jaws milled and hardened for high toughness and optimum surface hardness.
Application: Suitable for tapping holes where access is difficult.
Mineral Sponge is a unique, non-toxic mineral that has a large internal surface area. This enables it to absorb large quantities of gases and liquids.
Designed to absorb: - Liquid chemicals - Vapours and odors - Petroleum products.
“T Shirt” type rags compressed in a bag for general clean up an wipe down applications.
Non-hazardous, non-flammable, biodegradable, non-abrasive, non-toxic. Contains a blend of synthetic, high grade penetrants activated by water. Customise dilution for specialised cleaning. Can be used in a broad range of applications including dip tanks and parts washers.
Non-hazardous, non-flammable, biodegradable, non-abrasive, non-toxic. Contains a blend of synthetic, high grade penetrants activated by water. Customise dilution for specialised cleaning. Can be used in a broad range of applications including dip tanks and parts washers.
Nilfisk Aero 26 Push2Clean offers a semi-automatic filter cleaner in a compact machine. Nilfisk-ALTO exclusive Push2Clean semi-automatic filter cleaning system is featured on all of the Aero machines.
Cushion mats with bevelled edges on all sides are a fantastic way to resist fatigue, perfect for building entry areas, shop floors, workshops and counter areas, etc. Hole structure promotes free draining for fluids or debris, safe non-slip pattern, lightweight and easy to move for cleaning.
