KLIPLOK PRODUCT TECHNICAL STATEMENT
LCCL
LCCL
R406mm EVOC EVEFFECTIVE ITCEFFE mCOVER m604 LCCL
mm302
406mm EFFECTIVE C CL
203mm 18mm mm04
40mm
mm81
40mm
18mm
CL
mm561
165mm H430mm TDIW TESHEET EHS mWIDTH m034
430mm SHEET WID
Kliplok is a clip fixed trough section roofing and wall cladding profile. Kliplok is manufactured from high tensile steel material, enhancing its performance under both Point Load and Distributed Load. The slightly trapezoidal rib profile enhances resistance to foot traffic damage.
NEW ZEALAND BUILDING CODE COMPLIANCE The product will, if used in accordance with Steel & Tube’s installation and maintenance requirements, assist with meeting the following provisions of the building code: • Clause B1 Structure: Performance B1.3.3(a), B1.3.3(b), B1.3.3(g), B1.3.3(h) • Clause B2 Durability: Performance B2.3.1(b), B2.3.1(c) • Clause C3 Fire affecting areas beyond the fire source: Performance C3.9 • Clause E2 External moisture: Performance E2.3.1, E2.3.2 • Clause G12 Water supplies: Performance G12.3.2 • Clause F2 Hazardous building materials To comply with the performance clause of NZBC clause E2 roof cladding to be installed in accordance with: • • • •
Acceptable Solution NZS E2/AS1 NZ Metal Roofing Manufacturers Code of Practice Steel & Tube specifications Steel & Tube details are available on steelandtube.co.nz
Steel & Tube Kliplok is not subject to a warning or ban under section 26 of the New Zealand Building Act 2004.
0800 427 663 steelandtube.co.nz Disclaimer: This data should be used as a guide only, for exact applications, engage the services of a qualified engineer.
PRODUCT TECHNICAL STATEMENT
• Minimum Pitch: 3 . Roof runs in excess of 60 metres should be checked for water runoff capacity. • Effective Cover (mm): 406mm • Applications: Residential, Industrial/Commercial Roofing & Vertical Wall Cladding, Canopies. • Available nationwide: Manufactured in Wellington. • Materials: Specify coating and material based on environmental conditions in accordance with NZS E2/AS1. Available in metallic coated and pre-painted steel in 0.55mm BMT (base metal thickness). Matching translucent sheeting is available in G.R.P. (fibreglass) and Polycarbonate. • Durability: All material selections must be compatible with prevailing environmental conditions and adjacent materials. º
NOV 2023
DESIGN GUIDELINES