TIE WIRE FASTENERS Fasteners ideal for the installation of suspended ceiling systems and support wires for other suspension applications. Specifications/Features Split drive 5mm and 6.5mm diameter, Material steel C1038, Zinc plated Types
Expansion anchor 6.5mm diameter sleeve with a 5mm diameter bolt, Material Steel C1008, Yellow zinc plated Screws 14g 6.0-6.5mm diameter, Material Steel C1022, Zinc plated
Each fastener is provided with pre-punched hole for attachment of ceiling wire Tie wire driver bit required for installation
Code
3
4
5
Type
Drill Diameter mm
Embedment Depth mm
Eye Hole Diameter mm
Base Material
Ultimate Tension kN Rating
1
CFSPTW65
Split drive
6.5
25
5.5
25MPa Concrete
1.2
2
CFSPTW5
Split drive
5.0
25
4.0
25MPa Concrete
1.0
3
CFSUA6530
Expansion anchor
6.5
20
7-8
20MPa Concrete
1.1
4
TIEWIRE55
Metal screw
Self drilling
20
5.5
Sheet Steel
0.96**
5
TIEWIRE75Z
Timber screw
Self drilling
40
5.0-5.5
Wood
1.15*
*Rating can vary depending on quality of wood used. **Will vary depending on thickness of sheet steel, based on 3 threads of penetration into 16 gauge (0.060 in) sheet steel.
• Fasteners must be installed vertical to ensure tension load is applied along the axis.
0800 425 262 steelandtube.co.nz Disclaimer: This data should be used as a guide only, for exact applications you should engage the services of a qualified engineer.
SPECIFICATION SHEET
2
APR 2024
1