A test instrument is not sufficient to perform photovoltaic system measurements - accessories dedicated for this type of systems are also needed.
PVM-1 adapter
index: WAADAPVM1
Necessary to conduct selected measurements in photovoltaic systems. Short-circuits a circuit under voltage (DC). Moreover, it protects the user from electric arc.
Accessory dedicated for:
MPI-540-PV
MC4-banana sockets adapter
Connects banana jacks of the test instrument with the PV system utilizing MC4 connectors. The kit consists of 2 adapters.
MC4 splitter
Accessory dedicated for:
Connects banana jacks of the test instrument with the PV system utilizing MC4 connectors. Enables power measurement. The kit consists of 2 splitters.
Accessory
for: Measurement
Cable 2 m with MC4 plugs
index: WAPRZ002MC4KPL
Cable 2 m with MC4 plugs (set of 2 pcs). Maximum operating voltage: 1500 V DC.
Accessory dedicated for:
PVM-1530
Key for MC4 connectors
index: WAPOZKEYMC4
Key for opening MC4 connectors.
Accessory dedicated for:
PVM-1530
MPI-540-PV
Solar radiation measurement
IRM-1 meter
index: WMGBIRM1
IRM-1, small, but indispensable for testing PV systems. By measuring solar radiation values, as well as panel and ambient temperatures, it provides the necessary data to convert the results into STC conditions. The kit consists of:
• IRM-1 solar radiation and temperature meter,
• IRM-1 mounting&measuring set,
• Z-24 power supply, M14 carrying case.
Accessory dedicated for:
MPI-540-PV
Solar radiation measurement set
index: WMGBIRM1MPI
It enables cooperation between the IRM-1 and the MPI-540-PV meter. The kit consists of:
• IRM-1 solar radiation and temperature meter,
• IRM-1 mounting&measuring set,
• LORA-S1 adapter for data transmission,
• Z-24 power supply, M14 carrying case.
Accessory dedicated for:
MPI-540-PV
measurements
Mounting the solar radiation meter
IRM-1 mounting&measuring set
index: WASONTPVCKPL
The set is used to attach the IRM-1 meter to the PV panel. It consists of:
• IRM-1 mounting kit for PV panels,
• probe for measuring the temperature of PV panels and the ambient temperature.
Accessories dedicated for:
IRM-1 mounting kit for PV panels
index: WAPOZUCHPV
The set is used to attach the IRM-1 meter to the PV panel. It consists of:
• mounting frame,
• mounting clamp.
Accessories dedicated for:
Mounting clamp
index: WAZACPV
Presses the mounting frame to the PV panel.
Accessory dedicated for: IRM-1 IRM-1
index: WASONTPVC
Thanks to two sensors, the probe measures the temperature of a photovoltaic panel and the ambient temperature. It is attached to the mounting frame. Temperature measurement probe
Accessory dedicated for:
EVSE-01 adapter
index: WAADAEVSE01
Adapter allows to perform comprehensive measurements of electric vehicle charging stations - quickly and in accordance with applicable regulations. Simulating the charging cable (proximity pilot line - PP) and vehicle connection status (control pilot line - CP), it will bring the station into different operating states. This will enable measurements in the field of electric shock protection: ZS fault loop impedance, RISO insulation resistance and checking the parameters of RCD residual current devices. To facilitate diagnostics, one of the EVSE-01 sockets is provided with pulse width modulation signal (PWM).
The EVSE-01 adapter enables measurements of AC electric vehicle charging stations with type 2 connector. Tests for 1-phase and 3-phase stations are available - both with and without ventilation.
Accessory dedicated for:
TWR-1J adapter
index: WAADATWR1J
Adapter for testing residual current devices not installed and not operating in the electrical system. The device cooperates with any Sonel test instrument with implemented measurements of RCD parameters.
Accessory dedicated for:
AC-16 line splitter
index: WAADAAC16
AC-16 has been designed to simplify current and voltage measurements: it eliminates the need to remove the electrical sockets. It is dedicated for use in earthed networks. The unit is equipped with a 1:1 (X1) ratio and 10:1 (X10) ratio. The maximum current load is 16 A. The adapter can be used with any type of clamps offered by SONEL S.A.
Accessory dedicated for:
measurements
Measurements of multi-core cables
Depending on the measurement facility and the established standards (each conductor to each or conductor to other shorted and grounded conductors), the measurement of the insulation resistance of wires or multi-core cables requires several connections. In order to shorten the measurement time and eliminate the inevitable connection errors, Sonel recommends an adapter that switches between individual pairs of conductors for the operator.
AutoISO-1000C adapter
index: WAADAAISO10C
Designed to measure the insulation resistance of cables and multi-core wires with a measuring voltage of up to 1000 V. The use of the adapter eliminates the possibility of making a mistake, and significantly reduces the time needed to measure the insulation resistance between pairs of conductors. For instance, for 4-core cables, the user will perform only one connection operation (i.e. connect the adapter to the facility), while AutoISO-1000C will perform crossing for six consecutive connections.
Accessory dedicated for:
AutoISO-2500 adapter
index: WAADAAISO25
Designed to measure the insulation resistance of cables and multi-core wires with a measuring voltage of up to 2500 V. The use of the adapter eliminates the possibility of making a mistake, and significantly reduces the time needed to measure the insulation resistance between pairs of conductors. For instance, for 4-core cables, the user will perform only one connection operation (i.e. connect the adapter to the facility), while AutoISO-2500 will perform crossing for six consecutive connections.
Accessory dedicated for:
Adapter AEV-100
index: WAADAAEV100
Adapter with a type 2 male EV plug on one side and banana sockets on the other. It allows you to connect test leads with 4 mm banana plugs to the meter.
Accessory dedicated for:
Adapters for 230 V sockets
Type WS adapters are highly valued and practical accessories. They enable user a quick and easy measurement in a UNI-Schuko socket without the use of probes or measuring cords. Interaction with the measuring device is possible through a multi-plug connector. Depending on the type and model, we can use a straight or angled plug. By means of a dedicated button on the housing, some adapters have the function of automatic measurement triggering and saving the result to the memory.
Name Features
Index
WS-01 Triggering the measurement, UNI-Schuko straight plug WAADAWS01
WS-03 Triggering the measurement, UNI-Schuko straight plug WAADAWS03
WS-04 Not triggering the measurement, UNI-Schuko angled plug WAADAWS04
WS-05 Not triggering the measurement, UNI-Schuko angled plug WAADAWS05
Accessories
for:
Industrial socket adapters
Adapters enabling the connection of instruments to single-phase or three-phase sockets in industry environments. Offered in three current load versions – 16 A, 32 A and 63 A –as well as variants with 4 and 5 pins for the 3-phase outlets.
Name Intended use Index
AGT-16T 16 A, 1-phase, 3-pole sockets WAADAAGT16T
AGT-16C 16 A, 3-phase, 4-pole sockets WAADAAGT16C
AGT-16P 16 A, 3-phase, 5-pole sockets WAADAAGT16P
AGT-32T 32 A, 1-phase, 3-pole sockets WAADAAGT32T
AGT-32C 32 A, 3-phase, 4-pole sockets WAADAAGT32C
AGT-32P 32 A, 3-phase, 5-pole sockets WAADAAGT32P
AGT-63P 63 A, 3-phase, 5-pole sockets WAADAAGT63P
Accessories
Voltage adapters
index: WAADAM4M64
They enable the test instrument to be connected directly to the terminal block in the electrical switchboard. Each adapter has M4 / M6 thread. Versatility of this solution is unique on the global scale. The set includes 4 adapters.
Accessories dedicated for:
Illuminance measurements
LP probes cooperate with test instruments via a multi-plug connector. They enable measurements of illuminance with different resolution and in a different class, depending on the probe used.
LP-1 light meter probe
index: WAADALP1
LP-10B light meter probe measurements
index: WAADALP10B
LP-10A light meter probe
index: WAADALP10A
WS-06 adapter
index: WAADAWS06
Sonel miniDIN-multi-plug lead. Dedicated for the connection of a light meter probe with the test instrument.
Set: light meter probe+adapter
Includes measurement probe and WS-06 adapter.
LP-1 light meter probe + WS-06 adapter
LP-10B meter probe + WS-06 adapter
Accessories dedicated for:
WAADALP1KPL
WAADALP10BKPL
LP-10A meter probe + WS-06 adapter WAADALP10AKPL
Flexible coil
Flexible current coil, also known as a Rogowski coil, is useful for testing objects, on which hard clamps cannot be attached. The coil is terminated with a 5-pin plug. It is available with different levels of the output signal and different lengths.
Accessories dedicated for:
Current clamps
Split-Core current clamps are used for measuring alternating and direct currents. They are available in four variants of different diameters of the clamped conductor and the type of current to be measured. All models are terminated with a 5-pin connector.
Accessories dedicated for:
measurements
C-3 current clamp
index: WACEGC3OKR
The clamp is used to measure alternating currents. The maximum diameter of the tested conductor is 52 mm. It is terminated with a 5-pin plug, compatible with Sonel devices. Using of the clamp eliminates the need to disconnect control connections, significantly reducing the testing time. This clamp allows user to determine the type of current flowing through the tested earthing element and to check the resulting voltage drop.
Accessory dedicated for:
N-1 transmitting clamp
index: WACEGN1BB
The transmitting clamp is used to measuring current for earth resistance measurements. Together with C-3 current clamp (hard) they are used in the two-clamp method, and in many cases they eliminate the need for driving the auxiliary probes into the ground. The maximum diameter of the tested conductor is 52 mm. The clamp is powered by a removable two-wire lead, terminated with 4 mm banana plugs.
Accessory dedicated for:
Test lead for N-1 clamp
index: WAPRZ002DZBB
Two-wire test lead with a length of 2 meters. It connects N-1 transmitting clamp with measuring terminals of the meter used for earth resistance measurements. The test lead is factory-fitted with two pairs of „H” and „E” tags, which indicate the correct way of connecting it to the meter terminals and clamps.
Accessory dedicated for:
Adapter for C-PV clamp
index: WAADACPV
The cable serves as an adapter connecting the C-PV clamp with the test socket of the test instrument.
Accessory dedicated for:
MPI-540-PV
Pin probes
Secure pin probes with Ø 4 mm socket, intended for test leads with plugs and a guard. The probe insulated tips with a length of 4 mm, ensure safe measurements on a various objects. The probes have a guard ring and a grooved surface, providing stable and secure hand grip - also with dielectric gloves.
Pin probes 1 kV
Accessories dedicated for:
Accessories dedicated for: Accessories
Pin probes 5 kV
Accessories dedicated for:
Accessories dedicated for:
measurements
Foldable pin probe
index: WASONSP2M
The probe is used to measure the short circuit loop impedance of lighting fixtures or other objects that are out of reach of the hand. It can also be used to measure the insulation resistance of objects up to 1 kV. The probe is adjustable in length from 1 to 2 m. The measuring tip fits into a 16 A three-phase socket.
Plug banana, 4 mm
Measurement category 1000 V, CAT III
Accessory
Adapter with pin probe
index: WAADAWS09
The WS-09 adapter is an automatic three-wire pin probe. It provides much faster measurements by its start button located on the adapter housing. The adapter also has a button that allows user to save the measurement result in the memory of the meter. The probe used during measurements in electrical installations reduces to a minimum the operations performed on the meter itself, significantly improving the efficiency of work.
Accessory dedicated for:
MPI-536
MPI-535
Earth contact test probes (rods)
The test probes are designed for measuring earth resistance with 3- and 4-wire method. The probes are made of impact-resistant alloy and have an opening for direct connection of test leads with plugs without a guard.
Accessories
Accessories dedicated for:
PRS-1 probe
index: WASONPRS1
If the site insulation is used as a means of protection against electric shock, the insulation resistance of floors and walls should be checked with an appropriate measuring instrument using a probe dedicated for this purpose.
PRS-1 has the shape of an equilateral triangle and has been made according to the guidelines provided in for in the HD 60364-6 and EN 1081 standards. Legs of the probe were made with a special rubber mix – volume resistance of a single leg does not exceed 5 kΩ, and the hardness is in the range between 50 to 70 IRHD. With appropriate pressure on the probe, such a design solution will ensure approx. 900 mm2 contact surface area with the tested plane.
Accessory dedicated for:
Adapter for impedance measurement
index: WAADAWS07
Sonel adapter for measuring loop impedance ZL-N
Accessory dedicated for:
Crocodile clips 1 kV
Secure, insulated crocodile clips with Ø 4 mm socket, intended for connecting test leads with plugs and a guard. Their jaws have a wide range of opening that enables them to be attached to conductors with a diameter of 16 mm. In addition to the serrated jaw surface, the clips have flat surfaces for grasping small objects. They are available in many colors.
Plug
Spread
Measurement
Maximum
Accessory
Accessory
Accessory
Crocodile clips 11 kV
Secure, insulated crocodile clips with Ø 4 mm socket, intended for connecting test leads with plugs and a guard. Their jaws have a wide range of opening that enables them to be attached to conductors with a diameter of 43 mm. In addition to the serrated jaw surface, the clips have flat surfaces for grasping small objects. They are available in many colors.
Plug
Spread
Measurement
Accessories dedicated for:
measurements
Cramp
index: WAZACIMA1
Professional cramp designed for use in situations when strong and durable metal connection is required. The cramp is provided with a thumbscrew for secure tightening it to the object. The terminal with a diameter of 4 mm is compatible with test leads with plugs and a guard.
Plug banana, 4 mm
Spread range 50 mm
Accessory dedicated for:
CS-1 cable simulator
index: WAADACS1
Designed for insulation resistance simulation of power cables. Equipped with highly accurate resistors. Intended for training, presentation and auxiliary purposes – for instance in a situation, where general estimation of the measurement correctness is needed.
CS-1 enables the measurement of four resistance values and their combination. The device utilizes 4 mm banana plugs. Its casing is characterized by high resistance to mechanical damage.
Accessory dedicated for:
CS-5kV calibration box
index: WAADACS5KV
The calibration box has been designed to verify indications of insulation resistance meters. The use of high-quality resistors with a very high degree of accuracy makes the CS-5kV an ideal tool for cooperation with devices with a test voltage of up to 5 kV DC.
The box enables the measurement of four resistance values and their combination. The device utilizes 4 mm banana plugs.
Accessory dedicated for:
test leads
Test leads
Universal test leads, which are safe and resistant to damage. They can be used with a wide range of measuring accessories, such as crocodile clips, probes or cramps. The plug of the test lead is shielded ensuring safe operation.
Test leads 1 kV
Plug
Measurement category
4 mm, safe, straight, nickel plated
Insulation material silicon
Insulation type double
Cross-section area of the wire
Accessory dedicated for:
Accessory dedicated for:
Accessory dedicated for:
test leads
Test leads 1 kV
Plug
Test leads 1.5 kV
Plug
Accessories
Test leads 5 kV
Accessories
Test leads on reels
They are designed specifically for outdoor work - they have increased resistance to mechanical damage. One end of the test leads is terminated with a secure banana plug (4 mm), while the other end has a 4 mm lamella for connecting it to the reel and directly to the probe driven into the ground.
Accessories dedicated for:
Accessories dedicated for:
test leads
Test wire reel
index: WAPOZSZP1
It is used for winding leads. The reel is made of a material resistant to cracking, even at low temperatures. It is provided with an opening with a switching spring, enabling the reel to be directly inserted onto the probe driven into the ground. In order to improve the winding the leads, the reel is equipped with a folding handle. It also has a side terminal for connecting the test lead or a lead connecting a few wires.
Accessory dedicated for:
Test wire H-frame
index: WAPOZSZP3
It is used for winding leads. It is used for winding wires. It has a convenient carrying handle and a lead clip. The H-frame is lightweight, made of plastic with a high degree of durability and resistance to mechanical damage.
Accessory dedicated for:
BNC transmission cable
index: WAPRZBNC
The cable is used to connect an oscilloscope to the EVSE meter in order to obtain information about the PWM modulation of the control signal in an electric vehicle charging station.
Accessory dedicated for:
installation
Hanging hook straps
index: WAPOZUCH1
The straps are designed for hanging the meters in safe locations to free the operator’s hands. Their one end is provided with a hook, while the other with a Velcro strap used to attach the device.
Accessory dedicated for:
Universal magnetic hanging strap
index: WAPOZUCH6
Universal magnetic holder for mounting the meter to metal surfaces, e.g. switchgear doors, etc.
Accessory dedicated for:
Universal cover
index: WAPOZUCH12
Protective cover for meters.
Accessory dedicated for:
MPI-540-PV
MPI-530-IT
Mini Bluetooth keyboard - S--4 case communication
index: WAFUTS4
A mini keyboard enabling more comfortable data entry during measurement performance. Communication with the test instrument is wireless via Bluetooth. Protective case is equipped with hand fastening.
Accessories dedicated for:
MPI-530-IT
USB cable
index: WAPRZUSB
The cable with connectors of A and B type, compatible with USB 1.1 and 2.0. It is intended to connect the computer to Sonel devices equipped with USB sockets of B type. The cable is used to transfer the measurement results, configurations and updating the firmware of many meters.
Accessory dedicated for:
OR-1 adapter
index: WAADAUSBOR1
The adapter is designed for wireless data transmission between a PC and meters equipped with a corresponding transceiver module. It provides two-way communications between the measuring device and computer. To use this feature, the computer must have SONEL S.A. software installed, compatible with MPI meters.
Accessory dedicated for:
LORA-S1 adapter
index: WAADAUSBLORA
The adapter is designed for wireless data transmission between the IRM-1 meter and the master meter.
Accessory dedicated for:
Manage your data!
Sonel Reports PLUS
Download data from memory of test instruments and create necessary documentation.
Sonel Reader
Read the measurement data and save them on your computer.
Sonel MPI Mobile
Read the measurement data. Add photographs, comments and voice memo - and share it.
software
Sonel Reports PLUS
index: WAPROREPORTSPLUS
Sonel Reports Plus supports creation of documentation after testing of electrical installation. The software communicates with Sonel test instruments, downloads data from memory of the devices and creates necessary documentation. Many useful functions are included in order to help creating documentation of the measurements. Sonel Reports Plus supports the meter by reading, downloading and uploading test structure from/to test instrument.
Features:
• every report can contain description page,
• tree structure presents a clear picture of the tested building and its rooms. Test structure can be uploaded to the meter and downloaded from it together with test results,
• user can print labels for test points,
• for every room user can add picture or scheme of electrical installation,
• software contains library of fuses,
• for every room user can create separate table with test results.
Software dedicated for:
Sonel Reader
index: WAPROREADER
This software is designed for downloading data from the meters. It enables data transfer to the PC, data saving in popular formats and printing.
Software dedicated for:
Sonel MPI Mobile
With the application you can connect directly to the device via Bluetooth and download the measurement data from the meter. After reading the measurements from the instrument, they can be easily and quickly viewed, but also sent from the measurement place to a person who can help interpret the data or perform a measurements documentation. To each measurement we can add, voice memo, note, GPS data, or photo. From the application level we also have access to the meter’s user manual
Software dedicated for:
labeling
The label with the measurement result allows you to quickly and clearly assess whether the device is working correctly. Such a marker can be obtained without moving from the measuring stand - just use printers dedicated to PAT meters. The report includes the test result and its assessment, as well as a QR code to identify the device in the future.
Report / barcode SATO printer
index: WAADAD2
Communicates with the meter via USB.
Accessory dedicated for:
Label Roll for SATO printer
index: WANAKD2
Adhesive paper for prints 50 mm wide.
Ribbon for SATO printer
index: WANAKD2BAR
Toner cartridge. Accessories dedicated for:
Report / barcode Brother printer
index: WAADAD3
Communicates with the meter via Wi-Fi and USB.
Label Roll for Brother printer
index: WANAKD3
Cassette containing 24 mm wide adhesive paper and toner.
Battery for Brother printer
index: WAAKU19
Li-Ion rechargeable battery 7.2 V, 1.85 Ah.
Accessory dedicated for:
QR code scanner
index: WAADACK2D
During the tests, it is good to know which device you are dealing with. This information is carried by the QR code on the label. The QR code scanner allows to identify the device and assign test results to it, building the history of measurements in the tester's memory.
Accessory dedicated for:
power supply
Rechargeable battery
The recheargeable battery for Sonel measuring devices. Its advantages include full leak-tightness, high capacity, low memory effect and high energy density. The battery may be charged even when it is not completely discharged. It is suitable as a backup energy bank in situations where the meter cannot be recharged.
Accessory dedicated for:
Battery pack
index: WAPOJ1
A container for the set of batteries for Sonel meters. It enables user to replace the battery pack with four LR14 alkaline batteries. It is suitable as a backup energy bank in situations where the meter cannot be recharged.
Accessory dedicated for:
Cable for battery charging from car cigarette lighter socket (12 V)
index: WAPRZLAD12SAM
It is connected directly to the meter. It allows user to charge the battery when the only power source is the car cigarette lighter socket. Discharged battery? No outlet? With this accessory you will complete your measurements without interruptions. The cable may be also used for other devices offered by SONEL S.A.
Accessory dedicated for:
power supply
Z-7 power supply + 230 V mains cable (IEC C7 plug)
index: WAZASZ7
It is designed to power a number of Sonel measuring devices. It is equipped with IEC C8 male connector for connecting the power cord.
Accessory dedicated for:
Z-24 power supply
index: WAZASZ24
5 V power supply with USB 2.0 output and a detachable micro-USB cable.
Accessory dedicated for:
230 V mains cable (IEC C7 plug)
index: WAPRZLAD230
It is designed to power a number of Sonel measuring devices. One of its ends is terminated with C7 plug, while the other with the mains plug of CEE 7/16 type („Europlug”).
Accessory dedicated for:
230 V mains cable (IEC C13 plug)
index: WAPRZ1X8BLIEC
It is designed to power a number of Sonel measuring devices. One of its ends is terminated with C13 plug, while the other with the mains plug of CEE 7/16 type („Europlug”).
Cross-section area of the wire
Nominal voltage
Accessory dedicated for:
Charging set
index: WAKPLLADMPI520
x 0.75 mm2
Power supply and charging set for batteries in selected MPI series test instruments.
NiMH rechargeable battery WAAKU07
Cable for battery charging from car cigarette lighter socket (12 V) WAPRZLAD12SAM
Z-7 power supply + 230 V mains cable (IEC C7 plug)
Accessory dedicated for:
Mains power cable 230 V (16 A 5P socket)
index: WAPRZZAS16P
It is designed to power Sonel measuring devices. Terminated on one side with a 5-pole 16 A three-phase socket and on the other with a straight Schuko mains plug.
Cross-section area of the wire
Nominal voltage
Accessory dedicated for:
Three-phase mains cable (16 A 5P socket)
index: WAPRZZAS16P3F
It is designed to power Sonel measuring devices. Terminated on one side with a 5-pole 16 A three-phase socket and on the other with a 5-pole 16 A three-phase plug.
Cross-section
Accessory dedicated for:
EVSE-100 EVSE-100
MPI-530
MPI-520
power supply
Adapter zasilania AZ-2
index: WAADAAZ2
Designed for charging the analyzer battery directly from the electrical switchgear. It is particularly useful during long-term monitoring on facilities, where using the grid socket is not possible. Safety stackable plugs enable the charging of the analyzer while still having the option to perform measurements. Connected to the power supply adapter with an IEC C8 connector, AZ-2 does not require any additional adapters to function properly.
Accessory dedicated for:
Fuse
index: WAPOZB05A1000V
Fuse 0.5 A, 1000 V AC/DC, 6.3x32 mm.
Accessory dedicated for:
EVCAB cable 2.2 m (type 2 male/type 2 female)
index: WAKABEVT2T2
The cable is used to connect the EVSE meter to electric vehicle charging stations with a type 2 connector that do not have their own charging cable.
Accessory dedicated for:
transportation
L-2 carrying case
index: WAFUTL2
This case is designed for storage and transport of the meter and its accessories. The case has two main compartments, two pockets closed with the zipper and two Velcro pockets. It is also provided with a special pocket for documents and an insert for storing reels with test leads. The bottom of the case is protected against the contact with the ground by four feet. It is provided with a carrying handle and a strap for hanging it on the shoulder.
Accessory dedicated for:
L-3 carrying case
index: WAFUTL3
The case specially designed for the safe storage and transport of long (80 cm) probes driven into the ground. It is provided with a strap for hanging it on the shoulder. Strong seams prevent tearing of the material. Parts of the case exposed to puncturing by the probe tip/blade are reinforced.
Accessory dedicated for:
L-4 carrying case
index: WAFUTL4
This case is designed for storage and transport of the meter and its accessories. It has three main compartments closed with a zipper and one pocket on the flap. The compartments are equipped with elastic bands for fixing the accessories. The case is provided with a strap for hanging it on the user’s shoulder. Its bottom part is protected against contact with the ground by two feet.
Accessory dedicated for:
L-19 backpack
index: WAFUTL19
The backpack designed especially for comfortable carrying the meter with accessories. It is particularly useful when you want to have your hands free when moving with the equipment, e.g. when climbing a ladder. Equipped with a tablet pocket, it can accommodate a meter and a set of accessories. It is made of high-quality materials and has reinforced zippers and buckles.
Accessory dedicated for:
transportation
M-6 carrying case
index: WAFUTM6
This case is designed for storage and transport of the meter and its accessories. It has one main compartments closed with a zipper and one pocket on the flap. The main compartment is provided with an insert dividing it into smaller parts. It also has additional elastic bands for fixing the accessories. The case is provided with a strap for hanging it on the user’s shoulder. Its bottom part is protected against contact with the ground by four feet.
Accessory dedicated for:
M-13 carrying case
index: WAFUTM13
This case is designed for storage and transport of the meter and its accessories. Protects the contents against soil and damage.
Equipped with a shoulder strap.
Accessory dedicated for:
M-14 carrying case
index: WAFUTM14
This case is designed for storage and transport of the meter and its accessories. Protects the contents against soil and damage. Equipped with a shoulder strap.
Accessory dedicated for:
Hard carrying case
It ensures the safe transport and storage of the instrument together with its accessories. A large number of compartments allows for effective protection of a large amount of equipment.
XL-12 hard carrying case
XL-13 hard carrying case
Accessories dedicated for:
Strap
index: WAPOZPAS6
It is designed for carrying Sonel meters.
Accessory dedicated for: PVM-1021
L-2 hanging straps
index: WAPOZSZEKPL
The set includes a strap for carrying the meter in the hand, and a strap for hanging the device on the shoulder and around the neck. The longer strap is adjustable.
Accessory dedicated for:
M-1 hanging straps
index: WAPOZSZE4
The hanging straps are designed for carrying and hanging Sonel meters. Their length is adjustable. The straps may be used to hang the meter around the neck or on the shoulder.
Accessory dedicated for:
three-phase socket adapter 16 A WAADAAGT16C
AGT-16P three-phase socket adapter 16 A WAADAAGT16P
AGT-16T industrial socket adapter 16 A WAADAAGT16T
AGT-32C three-phase socket adapter 32 A WAADAAGT32C
AGT-32P three-phase socket adapter 32 A WAADAAGT32P
AGT-32T industrial socket adapter 32 A WAADAAGT32T
AGT-63P three-phase socket adapter 63 A WAADAAGT63P
AutoISO-1000C adapter
AutoISO-2500 adapter
WAADAAISO10C
WAADAAISO25
adapter WAADAEVSE01
IRM-1 mounting&measuring set (solar radiation meter mounting kit for PV panels + probe for measuring the temperature of PV panels and the ambient temperature)
Solar radiation measurement set (IRM-1 solar radiation and temperature meter + IRM-1 mounting&measuring set + Z-24 power supply + LORA-S1 adapter for data transmission + M-14 carrying case) WMGBIRM1MPI
TWR-1J - RCD breaker testing adapter WAADATWR1J
WS-01 adapter with START button with UNI-Schuko plug
WS-03 adapter with START button with UNI-Schuko plug
WS-04 adapter with UNI-Schuko plug
WS-05 adapter with UNI-Schuko plug
WS-06 adapter (miniDIN-4P plug)
WS-07 adapter for measuring Z(L-N)
WS-09 adapter (pin probe)
WAADAWS01
WAADAWS03
WAADAWS04
WAADAWS05
WAADAWS06
WAADAWS07
WAADAWS09
Voltage adapters with M4/M6 thread (set of 4 pcs.) WAADAM4M64 1 1 1
MC4-banana sockets adapter (set of 2 pcs.) WAADAMC4 1
MC4 splitter for power measurement in PV systems (set of 2 pcs.)
MC4 splitter for power measurement in PV installations 1500 V (set of 2 pcs.)
Cable 2 m with MC4 plugs (set of 2 pcs.)
WAADAMC4SKPL
WAADAMC4SV2KPL
Double-wire test lead 2 m, for N-1 clamps (banana plugs) WAPRZ002DZBB
F-1A flexible coil (Ø360 mm) 3 kA WACEGF1AOKR
F-2A flexible coil (Ø235 mm) 3 kA WACEGF2AOKR
F-3A flexible coil (Ø120 mm) 3 kA WACEGF3AOKR
N-1 transmitting clamp (Ø52 mm)
C-3 current clamp (Ø52 mm)
WACEGN1BB
WACEGC3OKR
C-4A current clamp (Ø52 mm) 1000 A AC WACEGC4AOKR
C-5A current clamp (Ø39 mm) 1000 A AC / 1400 A DC WACEGC5AOKR
C-6A current clamp (Ø20 mm) 12 A AC WACEGC6AOKR
C-7A current clamp (Ø24 mm) 100 A AC WACEGC7AOKR
Crocodile clip, black, 1 kV, 20 A WAKROBL20K01
Crocodile clip, red, 1 kV, 20 A WAKRORE20K02
Crocodile clip, blue, 1 kV, 20 A WAKROBU20K02
Crocodile clip, yellow, 1 kV, 20 A WAKROYE20K02
Crocodile clip, black, 11 kV, 32 A
WAKROBL32K09
Crocodile clip, red, 11 kV, 32 A WAKRORE32K09
Test lead 1.2 m, black, 1 kV (banana plugs) WAPRZ1X2BLBB
Test lead 1.2 m, black, 1 kV with N marker (banana plugs) WAPRZ1X2BLBBN
Test lead 1.2 m, red, 1 kV (banana plugs) WAPRZ1X2REBB
Test lead 1.2 m, blue, 1 kV (banana plugs) WAPRZ1X2BUBB
Test lead 1.2 m, yellow, 1 kV (banana plugs)
Test lead 3 m yellow CAT III 1500 V (banana plugs)
Test lead 5 m, red, 1 kV (banana plugs)
Test lead 10 m, red, 1 kV (banana plugs)
Test lead 20 m red 1 kV (banana plugs)
Test lead 30 m, red, 1 kV (banana plugs)
Test lead 15 m, blue, 1 kV (banana plugs)
Test lead 15 m, blue (on a reel)
Test lead 25 m, red (banana plugs, on a reel)
Test lead 25 m, blue (banana plugs, on a reel)
Test lead 30 m, red (banana plugs, on a reel)
Test lead 50 m, yellow (banana plugs, on a reel)
Test lead 1.8 m, black, 5 kV (banana plugs, shielded)
WAPRZ1X2YEBB
WAPRZ003YEBB1K5V
WAPRZ005REBB
WAPRZ010REBB
WAPRZ020REBB
WAPRZ030REBBN
WAPRZ015BUBBN
WAPRZ015BUBBSZ
WAPRZ025REBBSZ
WAPRZ025BUBBSZ
WAPRZ030REBBSZ
WAPRZ050YEBBSZ
WAPRZ1X8BLBB
Test lead 1.8 m, black, 5 kV (banana plugs) WAPRZ1X8BLBB5K
Test lead 1.8 m, red, 5 kV (banana plugs) WAPRZ1X8REBB
Test lead 3 m blue 5 kV (banana plugs) WAPRZ003BUBB5K
PRS-1 resistance test probe
LP-1 light meter probe (miniDIN-4P plug) WAADALP1
LP-1 light meter probe for MPI (set, WS-06 plug)
WAADALP1KPL
LP-10A light meter probe (miniDIN-4P plug) WAADALP10A
LP-10A light meter probe for MPI (set, WS-06 plug)
LP-10B light meter probe (miniDIN-4P plug)
LP-10B light meter probe (set, WS-06 plug)
Foldable pin probe, 1 kV, 2 m (banana socket)
Pin probe, black 1 kV (banana socket)
Pin probe, red 1 kV (banana socket)
Pin probe, blue 1 kV (banana socket)
Pin probe, yellow 1 kV (banana socket)
Pin probe, black 5 kV (banana socket)
Pin probe, red 5 kV (banana socket)
WAADALP10AKPL
WAADALP10B
WAADALP10BKPL
WASONSP2M
WASONBLOGB1
WASONREOGB1
WASONBUOGB1
WASONYEOGB1
WASONBLOGB2
WASONREOGB2
Probe for measuring the temperature of PV panels and the ambient temperature WASONTPVC
Earth contact test probe (rod), 25 cm WASONG25
Earth contact test probe (rod), 30 cm WASONG30
Earth contact test probe (rod), 80 cm
Cramp (banana socket)
CS-1 cable simulator
WASONG80V2
WAZACIMA1
WAADACS1
mains cable (16 A 5P socket)
charging set (charger + battery)
power supply adapter (IEC C7 plug/banana connectors)
L-3 carrying case for a 80 cm rods
armband case for mini Bluetooth keyboard
Barcode scanner 2D (USB) WAADACK2D
Portable report / barcode printer D-2 SATO (USB, portable) WAADAD2
