Issuu

MULTIPACK Baling Presses

Baling presses for all types of recyclabe materials such as plastic, cardboard, cans, ďŹ lm, etc. > Single chamber system > Multi chamber system > Tin can press > Barrel press

> Semi-automatic channel baling presses > Fully-automatic channel baling presses

MULTIPACK VERTICAL BALING PRESS The perfect solution for smaller and larger quantities of waste in tight spaces for supermarkets, restaurants, hotels, workshops, etc. SINGLE CHAMBER MULTIPACK 820 / 840 / 850 These power packs were especially developed to obtain higher bale weights with minimum space requirement and in doing so set new standards where economy is concerned. Pallet sized bales up to 500 kg for direct marketing can be made with a MULTIPACK 840 or 850.

SINGLE CHAMBER SYSTEM MULTIPACK 500 / 600 The small do-it-all for supermarkets, restaurants, hotels and workshops that have bulky refuse to dispose of and limited space available.

MULTI CHAMBER SYSTEM MULTIPACK 700 / 720 Compacting and sorting in one with the multichamber presses from PĂ–TTINGER. Install your domestic waste material centre in the smallest space.

MULTIPACK 650 The waste press for standard containers of 660 to 1100 litres. Optimum container utilisation is guaranteed through the impressive compacting factor of 3:1.

SACK PRESS MULTIPACK 660 The clean and hygienic solution for mixed refuse material. This sack press was designed for use especially in catering businesses and hospitals.

TIN CAN PRESS MULTIPACK 610 / 620 The can press for all metal and plastic packing up to 60 litres. The tremendous compaction of up to 20:1, the minimum space required as well as simple and clean operation make this MULTIPACK an indispensible component in painting businesses, auto workshops, restaurants, etc.

BARREL PRESS MULTIPACK 630 / 640 Steel drums of up to 200 litres are compacted effortlessly with a factor of 20:1.

2-3

MULTIPACK HORIZONTAL BALING PRESS The horizontal channel baling presses are ideal for industrial operation, furniture stores and distribution warehouses as well as for recycling centres in communal areas. Thanks to its power and high degree of automation, very high performance can be achieved. It can be used for valuable secondary raw materials such as paper, cardboard, plastic, film and hollow bodies.

MULTIPACK 3000 HA SEMI AUTOMATIC BALING CHANNEL PRESSES

THE BIGGEST ADVANTAGE of this baling channel press with a compression force of 12 to 36 tonnes is the possibility of filling it continually. A special construction of the press guiding plate with two cutting knives and a photo electrical sensor enable the machine to work without interruption.

MULTIPACK 2000 – HORIZONTAL BALING PRESSES WITH COUNTER PLATE Highly versatile horizontal baling presses with a compression force of 9 to 40 tonnes, which creates up to 500 kg heavy bale. Thanks to its power and high degree of automation very high performance is reached. The presses are used by industrial plants, large warehouses, large logistic centres as well as large furniture stores etc. Optionally the press can be equipped with a lifting and tilting system which is ideal for waste collecting centres in cities.

MULTIPACK 3000A – HORIZONTAL FULLY AUTOMATIC CHANNEL BALING PRESS The fully automatic PÖTTINGER MULTIPACK channel baling press with a high throughput performance and bale weights up to 600 kg is the ideal prerequisite for economical, futureoriented disposal. In combination with an optimum material feed (conveyor belt or air channel technique), valuable secondary raw materials such as paper, cardboard, film, hollow bodies and other packaging materials are crushed into highly compressed, compact, easily stackable and transportable bales.

MULTIPACK 4000 CAN PRESS Electro-hydraulic versions of can presses with pressing force up to 70 t for pressing metal cans, screw caps, tins and tubes.

4-5

TECNICAL DOCUMENTATION

VERTICAL BALING PRESSES TYPE

Motor

Pressing time incl. return

kW / V / Hz

sec.

1,5 / 400 / 50

1020

650 x 450

650 x 450 x 850

650 x 450 x 450

30 - 60

MP 600

1,5 / 400 / 50

1070

700 x 500

700 x 500 x 900

700 x 500 x 500

40 - 80

MP 820

160

4,0 / 400 / 50

850

1100 x 600

1100 x 700 x 1250

1100 x 700 x 800

100 - 220

MP 840

300

5,5 / 400 / 50

1100

1090 x 570

1200 x 800 x 1550

1200 x 800 x 1000

300 - 400

MP 850

500

7,5 / 400 / 50

1100

1090 x 570

1200 x 800 x 1550

1200 x 800 x 1000

300 - 500

MP 700/ II

1,5 / 400 / 50

1050

700 x 500

700 x 500 x 850

700 x 500 x 500

40 - 80

MP 720/ II

200

4,0 / 400 / 50

1420

1100 x 700

1100 x 700 x 1150

1100 x 700 x 800

150 - 250

MP 500

TYPE

MP 500

Compression pressure

Recommended daily performance

Maximum baling performance

bals / day

bals / hour

5 - 10

2-3

Vertical binding

Loading size

Filling opening

Pressing box WxDxH

Bale format

Binding tape

Binding wire

Width

–

920

1110 x 1880

345

Depth x height

Bale weight

Weight

Fuse slow

MP 600

5 - 10

2-3

–

970

1200 x 1950

400

MP 820

5 - 10

2-3

–

1580

930 x 1950

1140

MP 840

5 - 10

2-3

2,5

1620

1250 x 2920

1695

MP 850

5 - 10

2-3

2,5

1620

1250 x 2920

2180

MP 700/ II

5 - 10

2-3

–

1800

850 x 1970

616

MP 720/ II

5 - 10

2-3

–

2520

1200 x 2500

1640

SPECIALPRESSES TYPE

Compression pressure

Motor

Weight

External measurements

Max. barrel diameter

Performance

Height With bag change mm

kW / V / Hz

L x W x H / mm

Units/h

MP 610 A

1,5 / 400 / 50

285

630 x 810 x 2150

400 x 500

–

MP 620 A

100

1,5 / 400 / 50

320

630 x 810 x 2150

400 x 620

–

MP 630

200

4 / 400 / 50

770

1000 x 890 x 2450

700 x 950

–

MP 640

270

5,5 od. 7,5 / 400 / 50

940 - 970

1000 x 940 x 2470

700 x 950

50/60

–

MP 650

1,5 / 400 / 50

350

1540 x 1650 x 2370

–

MP 660

1,5 / 400 / 50

350

700 x 1260 x 1920

–

2550

TYPE

Compression pressure

Speciﬁc Compression

Motor

Filling opening

Bale size

Theoretical Performance

Performance with tinplate cans

External measurements / L x B x H

Weight

N/cm2

kW / V / Hz

m3/h

kg/h

MP 4250 A

320

150

7,5 / 400 / 50

600 x 320

400 x 400 x 200 - 300

200 - 300

3400 x 900 x 1800

1750

MP 4680 A

680

400

22 / 400 / 50

400 x 800

450 x 450 x 200 - 500

1700 - 2200

5200 x 1500 x 2200

5500

MP 4800 A

800

470

45 / 400 / 50

1400 x 900

450 x 450 x 200 - 500

2000 - 3000

5700 x 2400 x 3500

8820

MP 4900 A

1100

470

45 / 400 / 50

1400 x 900

500 x 500 x 200 - 400

4500

6500 x 2450 x 3700

9990

HORIZONTAL BALING PRESS TYPE

Compression pressure

Motor

Press box/ speciﬁc pressing

Fill height

Pressing time incl. return stroke

Bale weight

Binding v=vertical, h=horizontal

Weight

kW / V / Hz

sec.

MP 2100

100

4 / 400 / 50

700 x 550 x 1700

750

80 - 140

3xv

1050

MP 2120

120

4 / 400 / 50

800 x 600 x 1500

820

120 - 150

3xv

1240

MP 2140

140

5,5 / 400 / 50

800 x 600 x 2000

820

150 - 200

3xv

1370

MP 2160

160

7,5 / 400 / 50

800 x 750 x 2200

960

200 - 250

3xh

1660

MP 2250/ 25

250

7,5 / 400 / 50

1000 x 750 x 2500

1000

200 - 300

3xh

3150

MP 2350

350

15 / 400 / 50

800 x 1000 x 3150

1250

300 - 400

4950

MP 2400

400

22 / 400 / 50

800 x 1000 x 3150

1250

400 - 600

5400

MP 2350 S

350

11 od. 15 / 400 / 50

58 N/cm2

1600

40/60

150 - 300

6200

MP 2420 S

420

11 od. 22 / 400 / 50

56 N/cm2

1600

40/60

250 - 450

7200

MP 2550 S

550

22 / 400 / 50

50 N/cm2

1600

500 - 800

4 v + 2 h optional

11000

TYPE

External dimensions

Filling opening

Bale size

MP 2100

3840

1075

1000 (1870)

1000

700

550

MP 2120

3570

1170

1040 (1900)

1200

800

600

800

MP 2140

4700

1170

1040 (2105)

1200

800

600

1200

MP 2160

4910

1320

1155 (1870)

1400

800

750

1200

MP 2250/ 25

5800

1700

1850

1500

940

1000

750

1200

MP 2350

7200

1560

2100

1500

740

800

1000

1400

MP 2400

7200

1560

2100

1500

740

800

1000

1400

MP 2350 S

6400

1300

2500

1200

740

800

750

1200

MP 2420 S

6400

1500

2500

1200

940

1000

750

1200

MP 2550 S

7600

1600

2700

1400

1040

1100

1000

1200

Binding v=vertical, h=horizontal

Weight

SEMI-AUTOMATIC CHANNEL BALING PRESSES TYPE

Compression pressure

Motor

Press box/ speciﬁc pressing

Fill height

Pressing time incl. return stroke

Bale weight

kW / V / Hz

N/cm2

sec.

MP 3120 HA

120

4 / 400 / 50

40,0

1600

80 - 100

2xh

1450

MP 3280 HA

280

11 / 400 / 50

46,6

1600

150 - 250

3xh

3500

MP 3360 HA

360

15 / 400 / 50

48,0

1600

250 - 400

4xh

4800

TYPE

External dimensions

Filling opening

Bale size

MP 3120 HA

4200

1400

1800

600

520

600

500

1200

MP 3280 HA

5700

1500

2000

1250

720

800

750

1200

MP 3360 HA

6200

1600

2000

1250

920

1000

750

1200

6-7

FULLY-AUTOMATIC CHANNEL BALING PRESSES Compression pressure

Motor

Speciﬁc Compression pressure

Theoretical pressing performance

Bale weight

Binding v=vertical, h=horizontal

Additional binding

Weight

5400 - 5800

N/cm2

m3/h

MP 3100 A

210 - 320

7,5 - 22

40 - 60

65 - 180

150 - 350

3 h or 3 v

2 h optional

MP 3200 A

320 - 420

15 - 30

53 - 70

160 - 270

200 - 400

3 v/4 v or 3 h/4 h

2 h optional

8100 - 8900

MP 3300 A

420 - 650

22 - 45

56 - 87

135 - 390

350 - 600

4 v or 3 h

2 h optional

12900 - 14400 14100 - 18400

MP 3400 A

550 - 800

22 - 2 x 45

66 - 97

160 - 410

400 - 600

4 v or 5 v

2 h optional

MP 3410 A

700 - 1050

55 - 3 x 55

85 - 127

340 - 680

400 - 700

2 h optional

21000 - 26000

MP 3500 A

1050 - 1350

2 x 55 - 3 x 55

87 - 112

500 - 1010

800 - 1300

5 v or 5 h

3 h optional

28000 - 32000

MP 3600 A

550 - 850

30 - 2 x 45

62,5 - 96

160 - 430

400 - 800

–

14600 - 21200

TYPE

Filling opening

Bale size*

MP 3100 A

640

450 - 800

700

750

1200

MP 3200 A

740

800 - 1250

800

750

1200

MP 3300 A

920

1400

1000

750

1200

MP 3400 A

1020

1400 - 1700

1100

750

1200

MP 3410 A

1020

1700 - 2000

750

1100

1200

MP 3500 A

1020

2000

1100

1200

MP 3600 A

720

1400 - 1700

1100

800

1200

PÖTTINGER Entsorgungstechnik GmbH Moos 31 4710 Grieskirchen / Austria Telefon +43-7248-9001-8090 Telefax +43-7248-9001-2429 entsorgung@poettinger.at

* Variable bale length!

www.poettinger-oneworld.at

Technical modifications, mistakes or misprints reserved. 0418

TYPE