EN
MULTIPRESS MP 1.9/1.4/1.0
NEW!
OPTIMUM PRESS TECHNOLOGY in contemporary design > + 20% more filling weight > Reduction of transport costs
> Communication with machine > Online configuration of machine
> Universal deployment > Paint quality as in the car industry
> Optimum management of your
> Silent hydraulic pump > Optimum safety for operator
and location container pool
ECONOMIC SUCCESS depends on several factors Improved capacity – up to 20% more fill volume due to the newly developed press geometry. Tapered press bottom, curved press plate, high quality piston guiding and improved press geometry ensure an effective retention system. Up to 20% higher compaction!
Large filling opening The double build-up prevention by means of retaining tines and a 152 mm high trash holder in combination with the immersion depth of the compressing ram of 334 mm keeps the pressing area free and permanently available.
Type MP 1.4: 1050 x 1860 mm > 1,4 m³ / stroke Type MP 1.9: 1450 x 1860 mm > 1,9 m³ / stroke
MULTIPRESS MP 1.9/1.4/1.0 Universal deployment and variable equipment that is easy to retrofit Regardless of whether ground, ramp or building loading – additional equipment can be bolted on for quick and easy adaptation to any disposal location.
Tipping device Preparation provided as standard no welding needed for retrofitting. Optionally hydraulic comb lift.
Operation Phase adapter and connection for remote control are supplied as standard.
Side-hung or top-hung rear door The back wall is easily converted from a side-hung door to a top-hung door. Standard 8-point locking system for leak tight seal. The hook on the back can be used for hoisting it on to the lorry.
2-3
SAFETY
is top priority
Safety unlocking device with door catch system The operator is always outside of the danger area when opening the door. Through a special door catch system, people who are not in the field of vision remain, protected.
OPTIONAL: Bulky waste model – reinforced construction for bulky waste The following components are reinforced on this model: > Piston guide, piston and yoke > Side walls of the container > Floor cleaner on the piston head as standard
HYDRAULICS und ELEKTRICS Easy to access and clearly laid out. Accident prevention as no climbing aids are required. Easy to service thanks to ergonomic working position.
MP 1.4 = 1753 mm MP 1.9 = 2153 mm
MP 1.4 16 m3 = 5850 / 18 m3 = 6250 / 20 m3 = 6650 / 22 m3 = 7050 / 24 m3 = 7450 MP 1.9 16 m3 = 6250 / 18 m3 = 6650 / 20 m3 = 7050 / 22 m3 = 7450 / 24 m3 = 7850
2705 mm
1570 mm
3365 mm 700 mm
1400 mm
1570 mm
MP 1.4 = 1050 mm MP 1.9 = 1450 mm
MULTIPRESS MP 1.9/1.4/1.0 Building-feeding Taylormade solutions for the space-saving filling of your PĂ–TTINGER machines from inside of a building. By their innovative design, the individually adapted length of the chutes and different filling possibilities they can be perfectly integrated in modern architecture.
Tipping devices For the decentralised collection of waste in DIN standard containers. Tipping devices can be either attached to a press container or are available as stationary or mobile solutions. Thus, waste can be collected during operation in 80 to 1100 litre DIN standard containers and then filled into the press by means of the tipping device.
Quiet-running pump The PĂśttinger MULTIPRESS containers are equipped with a quiet-running pump as standard. At idle, the machine noise level is under 59 dBA.
4-5
MULTIPRESS MP 1.4 - 1.9
Optimum press technology in contemprary design
01 02 03 04 05 06 07 08 09 10 11 12
| | | | | | | | | | | |
13 14 15 16 17 18
| | | | | |
Modular construction - all parts screwable Hood over intake opening - comfortable operation Foldaway front hook Connector with 16 poles for additional operation panel Automatic phase changing Stability Combined poliamide rolls Gliders for piston (inside) lnclined press floor [inside) Concave front plate ROC 401 [inside) Sealings at maintenance door, hood and rear door Sand blasting RA 2,5 / powder coating primer plus top coat at least 120µ Rear door convertible top hanged / side hanged Rear hook for transporting the machine Ratchet spanner for rear door in safe position Door catch system Hour counter Low noise gear pump standard f-59dbA
Technical Data 1.4
MP 16-1.4
MP 18-1.4
MP 20-1.4
MP 22-1.4
Volume Container
16 m³
18 m³
20 m³
22 m³
24 m³
5650 mm
6050 mm
6450 mm
6850 mm
7250 mm
Length (without hook) Length (with hook)
MP 24-1.4
5850 mm
6250 mm
6650 mm
7050 mm
7450 mm
Width x height
2460 x 2704 mm
2460 x 2704 mm
2460 x 2704 mm
2460 x 2704 mm
2460 x 2704 mm
Filling height
1400 mm
1400 mm
1400 mm
1400 mm
1400 mm
1,4 m³
1,4 m³
1,4 m³
1,4 m³
1,4 m³
700 mm
700 mm
700 mm
700 mm
700 mm
Volume per stroke Height of press ram Press opening W x H
1860 x 1050 mm
1860 x 1050 mm
1860 x 1050 mm
1860 x 1050 mm
1860 x 1050 mm
Filling opening W x H
1860 x 1753 mm
1860 x 1753 mm
1860 x 1753 mm
1860 x 1753 mm
1860 x 1753 mm
Compaction force
340 kN
340 kN
340 kN
340 kN
340 kN
Pressing cycle
40 sec.
40 sec.
40 sec.
40 sec.
40 sec.
Motor
5,5 kW
5,5 kW
5,5 kW
5,5 kW
5,5 kW
16 A
16 A
16 A
16 A
16 A
400 V, 50 Hz
400 V, 50 Hz
400 V, 50 Hz
400 V, 50 Hz
400 V, 50 Hz
Fuse slow Electric connection Unladen weight Container conical
4797 kg
4947 kg
5097 kg
5247 kg
5397 kg
conical à 100 mm
conical à 100 mm
conical à 100 mm
conical à 100 mm
conical à 100 mm
falconic The essential tool for an efficient work organisation.
Technical Data 1.9
MP 16-1.9
MP 18-1.9
MP 20-1.9
MP 22-1.9
Volume Container
16 m³
18 m³
20 m³
22 m³
24 m³
6050 mm
6450 mm
6850 mm
7250 mm
7650 mm
Length (without hook) Length (with hook)
MP 24-1.9
6250 mm
6650 mm
7050 mm
7450 mm
7850 mm
Width x height
2460 x 2704 mm
2460 x 2704 mm
2460 x 2704 mm
2460 x 2704 mm
2460 x 2704 mm
Filling height
1400 mm
1400 mm
1400 mm
1400 mm
1400 mm
1,9 m³
1,9 m³
1,9 m³
1,9 m³
1,9 m³
700 mm
700 mm
700 mm
700 mm
700 mm
Volume per stroke Height of press ram Press opening W x H
1860 x 1450 mm
1860 x 1450 mm
1860 x 1450 mm
1860 x 1450 mm
1860 x 1450 mm
Filling opening W x H
1860 x 2153 mm
1860 x 2153 mm
1860 x 2153 mm
1860 x 2153 mm
1860 x 2153 mm
Compaction force
340 kN
340 kN
340 kN
340 kN
340 kN
Pressing cycle
40 sec.
40 sec.
40 sec.
40 sec.
40 sec.
Motor
5,5 kW
5,5 kW
5,5 kW
5,5 kW
5,5 kW
16 A
16 A
16 A
16 A
16 A
400 V, 50 Hz
400 V, 50 Hz
400 V, 50 Hz
400 V, 50 Hz
400 V, 50 Hz
Fuse slow Electric connection Unladen weight Container conical
5060 kg
5210 kg
5360 kg
5510 kg
5660 kg
conical à 100 mm
conical à 100 mm
conical à 100 mm
conical à 100 mm
conical à 100 mm
6-7
MULTIPRESS 1.0
MULTIPRESS 1.0 Skip
If there is limited space available or if being used with skip vehicles
Skip
Due to the container volumes from 8 to 12 m3 and the width of 2 m, the MULTIPRESS 1.0 suits to narrow surrounding areas. The press technology contains all advantages of the big brother and characterizes due to its efficiency, high compaction ratio and durability.
MP 8-1.0
MP 10-1.0
MP 12-1.0
Volume Container
8 m³
10 m³
12 m³
Length (without hook)
4200
4700
5200
–
–
–
Width x height
1950 x 2400 mm
1950 x 2400 mm
1950 x 2400 mm
Filling height
1270 mm
1270 mm
1270 mm
1 m³
1 m³
1 m³
Height of press ram
550 mm
550 mm
550 mm
Press opening W x H
1000 x 1450 mm
1000 x 1450 mm
1000 x 1450 mm
Filling opening W x H
1580 x 1450 mm
1580 x 1450 mm
1580 x 1450 mm
Compaction force
300 kN
300 kN
300 kN
Pressing cycle
24 sec.
24 sec.
24 sec.
Motor
5,5 kW
5,5 kW
5,5 kW
16 A
16 A
16 A
400 V, 50 Hz
400 V, 50 Hz
400 V, 50 Hz
Length (with hook)
Volume per stroke
Fuse slow Electric connection Unladen weight Container conical
3250 kg
3450 kg
3650 kg
conical à 80 mm
conical à 80 mm
conical à 80 mm
MULTIPRESS 1.0
MULTIPRESS 1.0 Roll-off container
300 mm
Special version as wet waste press Mixed waste and also waste with a high moisture content can be ideally compressed. The sloping pressing floor and the special high level difference (300 mm Trashholder) between the pressing floor and the container floor guarantee that the equipment remains clean. In addition, the MULTIPRESS 1.0 roll-off container is also available as an underground garage model.
Roll-off container
MP 10-1.0
MP 12-1.0
MP 14-1.0
MP 16-1.0
Volume Container
10 m³
12 m³
14 m³
16 m³
Length (without hook)
4960
5460
5960
6460
Length (with hook)
5200
5700
6200
6700
Width x height
1950 x 2440 mm
1950 x 2440 mm
1950 x 2440 mm
1950 x 2440 mm
Filling height
1270 mm
1270 mm
1270 mm
1270 mm
1 m³
1 m³
1 m³
1 m³
Height of press ram
550 mm
550 mm
550 mm
550 mm
Press opening W x H
1000 x 1450 mm
1000 x 1450 mm
1000 x 1450 mm
1000 x 1450 mm
Filling opening W x H
1580 x 1450 mm
1580 x 1450 mm
1580 x 1450 mm
1580 x 1450 mm
Compaction force
300 kN
300 kN
300 kN
300 kN
Pressing cycle
24 sec.
24 sec.
24 sec.
24 sec.
Motor
5,5 kW
5,5 kW
5,5 kW
5,5 kW
16 A
16 A
16 A
16 A
400 V, 50 Hz
400 V, 50 Hz
400 V, 50 Hz
400 V, 50 Hz
Volume per stroke
Fuse slow Electric connection Unladen weight Container conical
3390 kg
3550 kg
3720 kg
3880 kg
conical à 80 mm
conical à 80 mm
conical à 80 mm
conical à 80 mm
8-9
OPTIMIZE YOUR LOGISTICS
NEW!
with falconic, the control module for your press container. falconic offers everything you need to work more efficiently in our digital world:
> GPS Tracking and visualization of container location > Online configuration of machines and installation sites > Automatic adoption of site specific parameters when changing the containers
(e.g. type of material, amount of press strokes…) > Running statistic of all machine related data
(e.g. amount of emptyings, starting sequences, error messages etc.) > Information about machine equipment > Connection to already existing scheduling and invoicing programs possible > Data transfer from container to Web interface > Automatic adaption of the rotating direction of the motor
Online-adjustment of containers and location sites: > Pre-full and full announcement 50 – 100% > Personalized container status
> > > >
announcements (Email/SMS) to • Technical/Service department • Scheduling department • Client (machine location) Predictive service Amount of strokes at pressing cycle Position of press ram Adjustment of press related to type of material
falconic The mode of operation
Other brands
GPRS Data transfer worldwide
Data base / server Connection to existing scheduling and invoicing programs
falconic saves: LOGISTIC COSTS > SCHEDULING COSTS > MAINTENANCE COSTS >
Client / scheduler
Optimized emptying intervals
Predictivice service
Trouble-shooting by telephone
falconic RETROFIT - possible for all Pรถttinger machines and machines from other manufacturers 10-11
THE 7 QUALITY MARKS
POWDER COATING
STABLE EXECUTION + 200%
LOAD TESTS
OPTIMUM MATERIAL GLOW, GEOMETRIE OF THE PRESS
INNOVATVE DESIGN
TEXTILE COVERINGS WITH CAMO DESIGN
PÖTTINGER Entsorgungstechnik GmbH Moos 31 4710 Grieskirchen / Austria Telefon +43-7248-9001-8090 Telefax +43-7248-9001-2429 entsorgung@poettinger.at
FALCONIC KEEP AN EYE ON EFFICIENCY
www.poettinger-oneworld.at
Technical modifications, mistakes or misprints reserved. 0418
NEW!