The right way for Fitting Systems Manufacturing Manufacturing activities are carried out in our factory directly or through our Italian Sub-Suppliers/Partners. All steel components are hot dip galvanized according to International Standards in Salvi Galvanizing Plant where both standard and heavy thicknesses can be applied.
Hardware
Steel Forging factory
Salvi can also provide stainless steel and ductile iron components for special applications. Moreover steel alloy components could be supplied for installation in very low temperature areas. All bolts and nuts could be supplied in galvanized steel or stainless steel with metric, whitworth and UNC thread.
Pressure die casting factory
Hardware
Salvi is a Company specialized in designing, manufacturing and testing products for High and Extra High Voltage Overhead Transmission Lines: • Hardware, fittings and Accessories for Phase Conductors, Shield Wires and OPGW Cables for OHTL from 11kV up to 1,200kV and for both AC and DC Systems. • Damping Systems (Spacer Dampers and Vibration Dampers defined through a specific dedicated study) • Guy wire anchor devices The Company was established in 1920 as a private company and in 2002 joined SICAME, an international group including more than 60 companies operating in over 25 countries and selling worldwide. Salvi is successfully active worldwide and it keeps increasing its presence on various markets and consequently its turnover.
Packing and shipping department Galvanizing Plant
Engineering Department Hardware and Fittings Salvi Packing Department can arrange for : • standard packing system: pieces of same or similar type in the same cases or crates • packing per tower: various components necessary for one complete tower are packed in one or several cases clearly identified for relevant tower type.
Hardware and Fittings
Salvi has been participating, since its establishment in 1920, to the construction of a large number of high voltage transmission lines all over the world. It is impossible to outline 95 years of activity in a few words, therefore we have focused below the main highlights over last 5 years. The above result was achieved thanks to an annual production capacity of about 5,000 ton of hardware, fittings and accessories (ANIE Reference).
> 21,000 Km / 13,000 miles
> 6,000 Km / 3,700 miles
transmission lines up to 400 kV
transmission lines up to 800 kV
Salvi Engineering Department is formed by highly professional staff that carefully examine each Project in order to select the proper components necessary for the prescribed insulator assemblies and conductor/shieldwire accessories.
www.sicame.com
A. Salvi & C. S.r.l. Via Durando, 38 20158 – Milan (Italy) Tel. +39.370.339.1412 Fax +39.02.376.715.222 email: salvi@salvi.eu website: www.salvi.eu
In addition to the Project Technical Specifications and International Standards, also all other factors leading to a tailored design are taken into consideration: • Environmental conditions such as temperature, wind, pollution etc. • Tower electrical clearance requirements • Type of attachment to tower crossarms and to tower peak Special arrangements and/or special components are also designed when standard products are not suitable to satisfy the customer requirements.