BRONDE SUGAR
ARTIST: COLIN CARUSO @COLINCARUSO HEAD DIAGRAM
FORMULAS LIGHTENING
1. +
+ Bond Rx Lightener
2 oz. (60 g/ml) 5 Volume Paul Mitchell Cream Developer
GLOSS
1/8 oz. (3.75 g/ml) Bond Rx Step 1
HAIRLINE GLOSS
2.
3. +
2 oz. (60 g/ml) The Demi 8BV (8/08)
+ 2 oz. (60 g/ml) Paul Mitchell Processing Liquid
1 oz. (30 g/ml) The Demi 9BV (9/08)
1 oz. (30 g/ml) Paul Mitchell Processing Liquid
MODEL: SASHA
STEPS 1. Separate the front and back with a center division line and clip for control. In the front, create one triangle in the center and two on each side. 2. Beginning on the side, take ¼-inch diagonal back sections. Skim off the top of each section, place it in foil and apply Formula 1. 3. Continue until section is complete and move to the opposite side. 4. Move to the top triangle and split it down the center. Take a ¼-inch section along the side of the triangle. Skim off the top of this section and place it in a foil, then apply Formula 1. 5. Create smaller sections closer to the base of the triangle. Complete one side then move to the other side, following the same pattern. 6. Moving to the back segments, take ¼-inch strong diagonal forward sections, skim off the top, place in a foil and apply Formula 1. Continue pattern until reaching the top of the segment.
7. After completing back sections, move to the other side and follow the same pattern. 8. Process until level 9 is reached. 9. Remove foils, rinse and shampoo with Paul Mitchell Color Protect Post Color Shampoo. 10. Towel dry thoroughly and section the hairline around the whole head about 2 inches wide. 11. Apply Formula 3 to the hairline and Formula 2 to remaining hair. 12. Process for 20 minutes. 13. Rinse and cleanse with Paul Mitchell Color Protect Post Color Shampoo or Bond Rx Shampoo. 14. On towel-dried hair, apply Bond Rx Step 2. Process 5-15 minutes. 15. Rinse and blow-dry to activate the Bond Rx Technology.