A A1 B C C1 D E F G H I J K L M N N1 M1 O1 Part Plan SCALE 1:500 Downpipe from FB Connected underground to internal stormwater network to civil eng. Concrete flat roof to SE Screed to fall to fullbore outlets Waterproofing to specification and specialist subcontractor Con crete FB outlet ups tand B Con crete upsta nd U A B C I D J K R 1,20 5,00 13 23 5,00 5,00 FB outlet 3,44 2,67 2,91 2,64 5,00 3,80 23 13 Selected approved Safintra AZ Trimflute profile roof sheet fixed with lipped channels at 1400mm c/c in accordance with manufacturers specification, Sisalationed insulation laid between lipped channels and rroof sheeting as per manufactuers recommendations up sta nd 2,29 S Co nc re te 2,71 FireFireCabinet Cabinet C4 Gutter 13 13 Con crete ups tand terrazzo concrete flooring RE Bathroom F: CA: 48,52 m2 Tiles F: 4,01 m2 DOO - 005 CA: Studio 1 7 Wood flooring F: 23,79 m2 CA: Metal roof sheet DOO - 011 DOO - 009 Fire Cabinet F Bathroom Tiles F: 4,03 m2 DOO - 005 CA: Studio 2 Wood flooring Balcony F: CA: 24,88 m2 Custom Text Wood flooring F: CA: 23,19 m2 DOO - 009 DOO - 011 F 19Riser (0,16 m) 18Tread(0,30 m) 3 DOO - 011 F UP Studio 3 DOO - 004 Wood flooring DOO - 009 F: CA: 24,58 m2 Bathroom Tiles F: sta nd 4,00 m2 Fire Cabinet re te up C3 Metal roof sheet Co nc CA: F DOO - 011 Studio 4 Wood flooring DOO - 009 CA: 24,68 m2 C4 DOO - 004 F: RE Bathroom Tiles F: 4,00 m2 FireFireCabinet Cabinet FB outlet 6 N CA: Concrete upstand Gutter Second Story Storey | Not to scale| Not to scale Second 0 B A A1 B C C1 D E F G H I J K L M N N1 N2 M 1 1 6 2 2 5 2a 2a 3 WATERPROOFING: Torch on stepped DPC to cavity walls at slab, surface bed, windows and cills. Provide a min distance of 150mm between lip of stepped DPC. 4 4 DRIP: B C C1 D E F G H I J K L M N N1 M1 O1 SCALE 1:500 below DPC to be concrete filled. Provide of 150mm • all dimensions and levels are to be confirmed on site prior to to 38x38mm brandering atwalls 450mm max centers both directions fixed a min distance TIMBER ROOF STEEL ROOF • the design on this drawing is copyright and remains the between lip of stepped DPC. construction to underside beams manufacturers specification. 50mm isoboard Selected 700 concealed profiled metal roof sheeting , Selected approved Safintra AZapproved Trimflute klip-lok profile roof sheet fixedfixwith lipped property o fSM • any discrepancies are to be reported to SM immediately thermal insulation or equally approved laid under purlins assessment as by Laidininaccordance accordance with with manufacturers manufacturers specifications channels at 1400mm c/c specification,for high wind conditions CEILINGS: - TIMBER ROOF • all work is to be carried out in accordance with the • SM accepts no responsibility for errors resulting from specialist consultant specs. 50x75mm purlins at sheeting manufacturer laid betweensteel lipped channels and roof sheeting specified centres. N.B.R. SANS 10400 and applicable authority regulations Selected approved ceiling boards where required as 40mmsisalationed plywood, insulationon misinterpretation of this drawing with AZ 200 coating. as per manufactuers recommendations • the scaling of this drawing for construction purposes is not permitted stained black fixed in accordance with manufacturers specifications • all dimensions and levels are to be confirmed on site prior to construction issued for project number project The Green | Zennepark TS3.2 Working Drawings issued for TS4.2 Working Drawings 2023/11 Saarah Mkansi Advanced Diploma Architectural Technologist student T 082 682 8965 E saarahmkansidesigns@gmail.com 15 Hercules, Woodstock, Cape Town, 7925 Saarah Mkansi SM SM Technical Development Downpipe from FB location Connected underground project to internal stormwater FB outlet network to civil| Zennepark eng. Canal in Brussels , Belgium The Green North-East client Technical Development The Green Hub Con cretedrawing ups tand project number Second Storey, Part Plan The Green Hub location scale drawn drawing Cape Peninsula University of Technology Canal North-East in Brussels , Belgium drawing # scale flat roof to SE Concrete Screed to fall to fullbore drawn outlets Waterproofing to specification and specialist subcontractor Second Story revision general notes walls below DPC to be concrete filled. Provide SUSPENDED SLABS:a min distance of 150mm FFL to be safety glazed in accordance with of SANS 10137 & SANS 10400 TIMBER ROOF • the design on this drawing is copyright and remains the between lip of stepped DPC. Engineer approved cast in-situ concrete reinforced slab screed bedded as per Cold Water supply Part N engineer specification and prepared for tiling specification. Selected approved klip-lok 700 concealed fix profiled metal roof sheeting , property o fSM Waste Pipe Allmanufacturers flashings to suitspecifications the selected roofing/cladding material. Min. thickness Laid in accordance with for high wind conditions CEILINGS: - TIMBER ROOF • all work is to be carried out in accordance with the 0.55mm and as per manufacturers recommendations on 50x75mm steel purlins at sheeting manufacturer specified centres. to suit climatic Pipe N.B.R. SANS 10400 andSolid applicable authority regulations Selected approved ceiling BRICK boardsWALL: where required as 40mm plywood, with AZ coating. conditions and performance requirements. Refer to spec. doc. • the scaling of this drawing for construction general Brick work, and brickforce built in to Engineer Specifiactions. All200 cavity notes purposes is not permitted stained black fixed in accordance withties manufacturers specifications STEEL ROOF Selected approved Safintra AZ Trimflute profile roof sheet fixed with lipped A1 vision All glazing to windows & doors in excess of 1sqm or less than 500mm above A Part Plan d GLAZING/WINDOWS/SHOPFRONTS: PVC Drip angle to soffit slab and or beam where concrete All glazing to windows & doors in excess of 1sqm or less than 500mm above GROUND FLOOR SURFACE BED: SUSPENDED SLABS: passes over both skins of brickwork. FFLmesh to be safety glazed in accordance with of SANS 10137 & SANS 10400 Selected approved floor tiles on 25mm screed on 120mm 193 Engineer approved cast in-situ concrete reinforced slab screed bedded as per WATERPROOFING: N reinforced concrete surface bed on 250 micron USB Green Part Hyperlastic engineer specification and prepared for tiling specification. Torch on stepped DPC to cavity walls at slab, surface bed, windows and cills. sheeting with sealed laps on 25mm sand bed on selected sand fill compacted All flashings to suit the selected roofing/cladding material. Min. thickness Provide a min distance of 150mm between lip of stepped DPC. in layers not exceeding 150mm all in accordance with Engineers details 0.55mm andand as per manufacturers recommendations to suit climatic BRICK WALL: specifications. GLAZING/WINDOWS/SHOPFRONTS: conditions and performance requirements. Refer to spec. doc. Brick work, ties and brickforce built in to Engineer Specifiactions. All cavity to 38x38mm brandering at 450mm max centers both directions fixed to underside beams manufacturers specification. 50mm isoboard 3 3a stan GROUND FLOOR SURFACE BED: Selected approved floor tiles on 25mm screed on 120mm 193 mesh reinforced concrete surface bed on 250 micron USB Green Hyperlastic sheeting with sealed laps on 25mm sand bed on selected sand fill compacted in layers not exceeding 150mm all in accordance with Engineers details and specifications. NOTES: DRIP: PVC Drip angle to soffit slab and or beam where concrete passes over both skins of brickwork. B NOTES: as shown on drawing @ A1 SMkansi 00 as shown on drawing @ A1 U SMkansi