Issuu

Saniflo – the facts Saniflo macerator pumps and lifting stations reduce waste to liquid form and discharge through small-bore pipework to a soil stack or sewer. This means real economies in labour and structural work by eliminating conventional four inch gravity discharge pipework. Saniflo units activate automatically when the cistern is flushed. The units are quiet and economic to use and are simply connected to the domestic electrical supply, via an unswitched fused spur. The units are specifically designed for use in damp and steamy conditions and the powerful induction motors are sealed for life. Thermal overload cut-outs are fitted to help protect them from abuse. Only the highest quality, non-corroding materials and components are used. Moving parts are minimised for maximum reliability and durability. European standards apply to all our products in the domestic range: EN �2050-2 (Pumps) and EN �2050-3 (Domestic macerators). All our products are designed and manufactured in France and rigorously tested in our factory. We have years of experience in the market, constantly refining and improving our technology and we are confident on their reliability. As part of the SFA Group, Saniflo are committed to an integrated quality and environmental management system and our business and factory complies with ISO 900� and ISO �400�.

PUMPS & MACERATORS 330

2017

6 50 47

Not sure which Saniflo unit to specify? Lift the flap for a full ready-reference guide as to which of our units is best suited to your specific installation.

265

320

280

207Saniflo Limited Howard House, The Runway, South Ruislip Middlesex HA4 6SE, United Kingdom Tel 020 8842 0033 Fax 020 8842 �67� Web www.saniflo.co.uk As our policy is one of continuous product improvement we reserve the right to alter product specification without notice. All information in this publication is given in good faith. No responsibility can be accepted for any errors, omissions or incorrect assumptions. 01/�7 29671UK

Alarm�

Sink

Dishwasher

Washing Machine

Bidet

Power shower

N EW EW

SANISLIM Ref �054/1

N EW

Ref 6052

6002

SANITOP UP

6003

SANIPLUS UP

�054/�

SANISLIM

6052

SANIPACK PRO UP

6006

SANIPRO UP

�08�

SANICOMPACT

�0

6��0

SANIWALL PRO UP

��

6004

SANIVITE +

�2

6043

SANISHOWER +

�3

�043/3

SANISHOWER FLAT

�4

N EW

SANIPRO UP

SANIFLO UP

Ref 6003

SANIPACK PRO UP

600�

Saniflo works where convention doesn’t. Because Saniflo products are perfect for unconventional situations where drainage is a problem, you’ll be able to say ‘yes’ to your customers more often. More jobs each month and more revenue for your business.

��54/��55/��56

SANIFLOOR

�5

SANICOMPACT 2

��43/��44/��45

TRAYMATIC EXTERIOR

�6

A bath in the basement, a loo in the loft or a shower under the stairs!

SANIWALL PRO UP

�116

SANIMATIC

�7

Wherever you need access to conventional drainage but there’s none

�900/190�/1902

SANIACCESS 1, 2 & 3

�903

SANIACCESS PUMP

Ref 6006 Ref �08�

N EW

Ref 6��0

N EW

SANIVITE + Ref 6004

Having brought the macerator concept to the UK almost 40 years ago,

Ref 6043

742

close by, Saniflo probably has a product to help you find a solution.

SANISHOWER +

�8-19

SANISHOWER FLAT Ref �043/3

SANICONDENS

we now have a huge range of over 30 products including macerator

�082/2

SANICONDENS BEST

pumps, lifting stations and integrated sanitaryware; all designed to

Ref ��54/1155/1156

�082/5

SANICONDENS PRO

work with small bore pipework that’s easy to install and run to the

TRAYMATIC EXTERIOR

��33

SANICONDENS ECO

Ref RD590AD/1AD/ 2AD/3AD/4AD/5AD

nearest soil pipe. You’ll find they’re now very quiet and unobtrusive in

�082/4

SANINEUTRAL

��32

SANICONDENS CLIM PACK

��3�/1134

SANICONDENS CLIM MINI & CLIM DECO

SANIFLOOR

SANIMATIC Ref �116

22-23

SANIACCESS �

operation and with many slim-line models available; easy to hide away. All our products are designed and manufactured in France and rigorously tested in our factory. We have a wealth of experience in the

Ref �900

SANIACCESS 2

ACCESSORIES

Ref �90�

SANIACCESS 3 Ref �902

SANIACCESS PUMP

market – 55 years of continuous development and testing goes into

�095

SANIALARM

each device – constantly refining and improving our products and we’re

�085

SANIFLO CLEANSER/DESCALER

so confident in their reliability they’re guaranteed for 2 years with an additional 3 years for our new 2017 products. For more information

Ref �903

Refrigeration Units

Air Conditioning Units

Condensing Boiler

Refrigeration Units

Air Conditioning Units

Condensing Boiler

on our guarantee policy please see opposite.

Our guarantee

available to your customers supporting the product day in day out, Saniflo units are fully guaranteed for up to five years and backed by a nationwide service network of skilled and experienced engineers, see page 27.

meaning worry free installation for plumbers and end users.

Technical Advice / Spares: 020 8842 0033

All you need to do is think of the possibilities.

Service Engineer Linkline: 0345 765 00�� SANICONDENS BEST Ref �082/2

SANICONDENS PRO Ref �082/5

SANICONDENS ECO Ref �133

SANICONDENS CLIM PACK Ref �132 SANICONDENS CLIM MINI Ref �131 SANICONDENS CLIM DECO Ref �134

SANINEUTRAL Ref �082/4

Saniflo UK also has a national network of over �00 service engineers

Please phone from a landline from the unit location in order to be connected to your local service engineer. Visit our official website www.repairs.saniflo.co.uk for a full listing of service engineers by geographical area. Our pumping systems are designed for the disposal of normal organic waste product, water or paper. They are not intended to replace kitchen waste or sanitary waste disposal units. As our policy is one of continuous improvement we reserve the right to alter product specifiction and price without notice. All information in this publication is given in good faith. No responsibility can be accepted for any errors, omissions or incorrect assumptions. Illustrations are diagrammatic and should be regarded only as indicative of technical requirements. All vertical pumping distances are measured from base of unit.

Sanialarm can be fitted to these units if required.

�

Sanicompact can be installed in locations with a minimum water supply pressure of �.7 bar.

www.saniflo.co.uk

1321

Ref 6002

SANIPLUS UP

Shower

Ref 600�

SANITOP UP

DOMESTIC

SANIFLO UP

Bath

Our product range has been divided into Domestic and Commercial categories to make it simple to find the product you're looking for, quickly and easily.

Wash Basin

All of our units can be used in any of these situations: Basement, Ground Floor, Upper Floor, Loft/Attic — just choose the right product for your installation...

Wall-hung WCs

CONTENTS

PRODUCT SELECTOR

DOMESTIC

Conventional plumbing uses gravity to allow drainage to conveniently sited pipework and sewers. But what if gravity isn’t on your side? What if drainage pipework is inconveniently positioned, perhaps when working in a loft or a basement? Saniflo works where convention doesn’t. The domestic range consists of �8 solutions for bathrooms and kitchens.

THE (R)EVOLUTION CONTINUES

LOFT CONVERSION EN-SUITE

SANIFLO: PLUMBING THE POSSIBILITIES SINCE 1958

Need an additional en-suite? Try a Sanipro Up

• Market leader for macerators

See page 09

• Sleeker designs and now even quieter • More efficient motors (only 400W) • Easier accessibility for simple maintenance • 5 years Extended Warranty MAIN BATHROOM

OUR NEW AND IMPROVED RANGE OF DOMESTIC MACERATORS AND PUMPS HAS EVOLVED FOR A BETTER EXPERIENCE… NEW for conventional WC installations Easy to maintain • Easy access lid gives improved accessibility to the tank to remove any objects - without disassembling the macerator - without emptying the tank

See page 04

See page 06

Quieter products • Stronger shock absorbers: reducing vibration and noise • The quietest macerator range on the market – 46 dB(A)

BEDROOM EN-SUITE

Need to pump bath water waste? Possible with a Saniaccess Pump

Want a shower in the en-suite? Possible with a Sanishower +

See page 20

See page �3

KITCHEN

AIR-CONDITIONED LIVING ROOM

Problems removing kitchen water waste? You need a Sanivite +

Air-conditioning dripping? You need a Sanicondens Clim Pack

See page �2

See page 24

Replace an existing Saniflo macerator •P ositioning, inlet and discharge pipework remain the same •R eplaces an existing product without changing the current installation pipework

Creating a new utility room? Try a Sanivite + See page �2

NEW for back-to-wall or wall hung WC installations

See page 08

See page 07 or �0

See page 21

See page 11

Products suitable for a whole variety of applications. (Just refer to each of the product keys on the relevant pages).

Condensing Boiler

Alarm

Sink

Power Shower

Shower

Bath

Wash Basin

110

Wall-hung WCs

Quieter products • The quietest macerator range on the market – 48 dB(A) for Sanipack Pro Up and Saniwall Pro Up.

Take away acidic boiler condensate. Use a Sanicondens Best

500

Double access to the product 250 • Direct access to the tank in case of blockages • Direct access to the electrical connections to change any used parts.

Not much room to make a cloakroom? Possible with a Sanislim or Sanicompact

Refrigeration Unit

110

BASEMENT GARAGE/BOILER ROOM

CLOAKROOM

Air Conditioning Unit

BASEMENT UTILITY ROOM

500

Dishwasher

See page 09

Washing Machine

250

Sleeker models • Sleeker designs that fit even more discretely behind a WC

Bidet

See page 05

EW N

Product Ref: 600�

Product Ref: 6002

The original macerator pump unit that allows installation of an extra WC almost anywhere when a conventional solution isn’t possible.

Similar to the original Saniflo Up but allows connection of a WC and a wash basin to one macerator pump. A great choice for a small cloakroom.

Why choose this product?

• Ideal for one WC • Unobtrusive with a quiet motor • Easy access for servicing and maintenance • No need to change the pipework - replaces existing Sanifo products • Improved design of casing

• Unobtrusive with a quiet motor • One top waste inlet • Easy access for servicing and maintenance • No need to change the pipework - replaces existing Sanifo products • Improved design of casing

250

Vertical/horizontal performance

250

Vertical/horizontal performance

500

max 40m

4m 3m 2m

max 60m

max 80m

max 80m max 100m

max 100m

max 40m

110

max 60m

110

max 20m

500

362 571

339

200mm depth required behind the WC

356

222

200mm depth required behind the WC Discharge Pipework 22 / 28 / 32mm

Product Weight 5.4kg

Discharge Pipework 22 / 28 / 32mm

Product Weight 5.4kg

Motor Power 400 Watts

Inlet Pipework 40mm

Motor Power 400 Watts

Inlet Pipework 40mm

Voltages 220-240 V/50 Hz

IP Rating IP44

Voltages 220-240 V/50 Hz

IP Rating IP44

Working Waste Water Temp 35°C

Discharge height (m)

�

0 20 40 60 80 �00 Flow rate (l/min)

323

265

312

Up to 5 years warranty See page 27

185

265

291

166

185

Up to 5 years warranty See page 27

166

222

0 20 40 60 80 �00 Flow rate (l/min)

www.saniflo.co.uk

EW N

Product Ref: 6003

Product Ref: �054/�

The Saniplus Up enables you to install an additional bathroom with ease. With two inlets and a greater tank capacity, the Saniplus Up can easily deal with a WC, wash basin, bidet and even the highest output power showers.

When you need slimline sanitaryware you need a macerator pump to match. Sanislim needs just �45mm depth behind the WC and, with an inlet either side, can take waste from a WC, a shower, wash basin and bidet if required.

Why choose this product?

• One unit deals with the waste from an additional bathroom • Works with high output power showers • Two side inlets and a greater tank capacity • Easy access for servicing and maintenance • No need to change the pipework - replaces existing Sanifo products • Improved design of casing

• Designed to fit behind the latest slimline styles of WC • Deals with all waste from a small bathroom • Inlets either side of unit

Vertical/horizontal performance 2.5m

Vertical/horizontal performance

2m 1m

max 60m

max 70m

4m 3m

max 20m max 30m max 40m

max 80m

max 90m max 100m

235

515 43

181

Up to 5 years warranty See page 27

270

269

331

447

186

40 248

163

Only �45mm depth required behind the WC. Clearance of 320mm is required from floor level to the underside of a close coupled suite to accomodate the discharge elbow.

526

2�0mm depth required behind the WC Discharge Pipework 22 / 28 / 32mm

Product Weight 6.4kg

Discharge Pipework 22 mm

Product Weight 5.8kg

Motor Power 400 Watts

Inlet Pipework 40mm

Motor Power 400 Watts

Inlet Pipework 40mm

Voltages 220-240 V/50 Hz

IP Rating IP44

Voltages 220-240 V/50 Hz

IP Rating IP44

Working Waste Water Temp 35°C

Working waste Water Temp 35°C

Discharge height (m) 8 Discharge height (m)

7 7

2 �

� 0

0 0 20 40 60 80 �00

0 20 40 60 80 �00

Flow rate (l/min)

www.saniflo.co.uk

EW N

Product Ref: 6052

Product Ref: 6006

Designed to be concealed from view, where back-to-wall or wall-hung sanitaryware is required, the extra slim Sanipack Pro Up can take waste from a WC, wash basin and shower. An ideal choice for a modern, sleek finish.

The Sanipro Up is ideal for adding an en-suite. With two inlets the Sanipro Up can easily deal with a WC, wash basin, bidet and a power shower.

Why choose this product?

• Perfect solution for a complete shower room installation • Ideally suited for fitted bathroom units • Capacity to connect WC, wash basin, bidet and shower • Easier access to both the tank and electrical connections. • Quiet motor • Extra slim dimensions

• Compact, neat and unobtrusive • Capacity for an en-suite installation • Inlets either side of unit • Easy access for servicing and maintenance • No need to change the pipework - replaces existing Sanifo products • Improved design of casing

Vertical/horizontal performance

max 20m max 40m

max 60m

max 80m

max 100m

max 80m

169169

363363

Up to 5 years warranty See page 27

303 303

Up to 5 years warranty See page 27

186186 4343 3232

435 435 472 472

150150

239

2�0mm depth required behind the WC

Discharge Pipework 22 / 28 / 32mm

Product Weight 7kg

Discharge Pipework 22 / 28 / 32mm

Product Weight 6.4kg

Motor Power 400 Watts

Inlet Pipework 40mm

Motor Power 400 Watts

Inlet Pipework 40mm

Voltages 220-240 V/50 Hz

IP Rating IP44

Voltages 220-240 V/50 Hz

IP Rating IP44

Working Waste Water Temp 35°C

Working Waste Water Temp 35°C Discharge height (m)

Discharge height (m) 8

8 7

�

0 20 40 60 80 �00

0 20 40 60 80 �00 Flow rate (l/min)

Flow rate (l/min)

185

432

4040

352

max 60m

185

max 40m

319

max 20m

262

www.saniflo.co.uk

EW N

Product Ref: �08�

Product Ref: 6��0

A super-compact WC unit with a built in macerator that’s perfect for small cloakrooms. It even features a wash-basin inlet and needs no cistern to make the most of the smallest spaces.

With a built-in frame system designed to accommodate all types of wall-hung WC (not supplied), Saniwall Pro Up has a dual flush and an integral macerator pump. In addition to taking the waste from a WC there are two side inlets enabling a wash basin, shower and bidet to drain to the macerator.

Why choose this product?

• A WC with built in macerator • Automatic push-button flush connected directly to the domestic water supply • Needs no cistern • Features a soft-close toilet seat • Water saving flush system

• Designed with Grohe cistern Technology • Concealed unit ideal for use with built-in bathroom furniture • Ideal for wall-hung WCs • Built in frame system with an elegant glass wall covering • Integrated dual flush cistern • Adjustable feet allow variable heights of pan • Two side inlets • Flush plate included • Easier access to both the tank and electrical connections. • Quiet motor

Vertical/horizontal performance 3m

max 10m

2m 1m

Up to 5 years warranty See page 27

Vertical/horizontal performance

max 20m max 30m

5m 4m

3m 380

390

560

430

max 20m max 40m max 60m max 80m max 100m

302

364 219

174 1000 435 960

1130

445

max.620

150 40

315

403

Requires a minimum of �.7 bar water supply pressure

0-200

562 206

230

+1.00

Saniwall Pro Up has been awarded AFISB (French Association of Bathroom Industries) WELLBEING certification, to recognise its contribution to helping people with reduced mobility.

220

475

214 169

+1.00

1060

495

10-70

max.230 562 206 40

500

302

180

230

145/165 (O100)

364

174 435

Mounting centres for WC pan are �80-230mm Discharge Pipework 32 mm

Product Weight 23.2kg

Discharge Pipework 22 / 28 / 32 mm

Product Weight �5kg

Motor Power 550 Watts

Double Flush 1.8 litre / 3 litres

Motor Power 400 Watts

Inlet Pipework 40mm

Voltages 220-240 V/50 Hz

IP Rating IP44

Voltages 220-240 V/50 Hz

IP Rating IP44

Working Waste Water Temp 35°C

Working Waste Water Temp 35°C Discharge height (m) 8

Discharge height (m)

5 3 �

� 70 80 90 �00 ��0

�0

0 �0 20 30 40 50 60 70 80 90 �00 ��0 Flow rate (l/min)

Flow rate (l/min)

www.saniflo.co.uk

��

EW N

Product Ref: 6004

Product Ref: 6043

Ideally suited to a kitchen or utility room, Sanivite +’s powerful pump has four inlets for connection to domestic sinks or appliances. With compact dimensions, Sanivite + can be concealed in a kitchen unit or behind a demountable panel to give access for servicing.

The Sanishower + can be installed next to a shower tray with access for maintenance. Capable of pumping a standard electric or gravity mixer shower. Two inlets mean a wash basin can be added too.

Why choose this product?

• Ideal for hot, soapy water • Four inlets • Powerful, quiet pump • Low activation level (95mm) • Compact for concealed installation

• Overcomes gravity drainage issues • Allows basement showers • Can be fitted next to shower tray' • Additional inlet for basin • Includes integrated carbon filter • Low activation level (65mm)

Discharge ø32

Vertical/horizontal performance Vertical/horizontal performance

Inlet ø40

max 10m

max 20m

max 50m

max 30m

max 60m 367367 266266

166 46

max 50m

47 47

O40 O40

359 308

max 40m

189189

Inlet ø40

max 20m

max 40m

max 10m

max 30m

213

3% 146 30

Up to 5 years warranty See page 27

277 319 319

256 256 277

145

Up to 5 years warranty See page 27

O40 O40

120mm minimum

368368

Discharge Pipework 32 mm

Product Weight 6.4kg

Discharge Pipework 22 / 32mm

Product Weight 3.5kg

Motor Power 400 Watts

Inlet Pipework 40mm

Motor Power 400 Watts

Inlet Pipework 40mm

Voltages 220-240 V/50 Hz

IP Rating IP44

Voltages 220-240 V/50 Hz

IP Rating IP44

Working Waste Water Temp 35°C

Activation Level 65mm

Working Waste Water Temp 35°C max 60°C

Discharge height (m) Discharge height (m)

8 7

�

0 20 40 60 80 �00 Flow rate (l/min)

�2

0 20 40 60 80 �00 Flow rate (l/min)

www.saniflo.co.uk

�3

FLOOR®

FLAT Product Ref: �043/3

Product Ref: ��54/��55/��56

Ideal pumping solution for a low level shower tray. Capable of pumping a standard electric or gravity mixer shower. Two inlets mean a wash basin can be added too.

Designed specifically where floor drainage is required but where space underneath is very limited e.g. wet rooms. This two part kit with a powerful shower waste pump and a choice of three waste designs can pump up to 3m vertically as well as 30m horizontally. Higher flow rate means it can be used with powerful ‘rain head’ showers.

Why choose this product?

• Suits low-level shower trays of 80mm and over • Overcomes gravity drainage issues • Allows basement showers • Additional inlet for basin • Two part kit with Sanishower + pump plus gully and waste • Low level activation

• Suits wet rooms and low level shower trays • Ideal for high flow applications • Pump and waste inlet can be up to 3m apart horizontally • Dual function - sucks waste up from the gully and pumps waste water away up to 3m vertically or 30m horizontally • Pump can be sited up to 300mm above the gully • All gully types are 90mm in diameter

Discharge ø32

Vertical/horizontal performance

�

Gully Types

� Ref ��54: With shower waste for tiled floor - Height 68mm 2 Ref ��55: With shower waste for vinyl floor - Height 68mm 3 Ref ��56: With shower waste for trays - Height 63mm

Inlet ø40

2m 1m

Vertical/horizontal performance 221

max 10m

166

Inlet ø32

max 20m

330

max 30m

2m 1m

3% 80

max 10m max 20m max 30m

1% 295

295

Discharge Pipework 22 / 32mm

Working Waste Water Temp 35°C

Discharge Pipework 32 mm

Motor Power 250 Watts

Product Weight 3.7kg

Motor Power 400 Watts

Voltages 220-240 V/50 Hz

IP Rating IP44

Voltages 220-240 V/50 Hz

Product Weight Sanifloor � - 7.9kg Sanifloor 2 - 7.9kg Sanifloor 3 - 7.7kg IP Rating IP44

Working Waste Water Temp 35°C Discharge height (m) 5,5 5,0 4,5 4,0 3,5 3,0 2,5 2,0 �,5 �,0

Discharge height (m) 3 2 �

�0 20 30 40 50

�4

24 25 26 27 28 29 30 3� Flow rate (l/min)

Flow rate (l/min)

www.saniflo.co.uk

�5

EXTERIOR Product Ref: RD590AD/RD591AD/RD592AD/RD593AD/ RD594AD/RD595AD

Why choose this product?

• L ow level shower tray for ease of access for the less abled • External waste water pump • Minimal disruption • Maximises options for shower location • No excavation required • Anti-slip surface

• • • • • •

TRAYMATIC® Exterior RD590AD - 800 x 800 x 53mm RD591AD - 900 x 900 x 53mm RD592AD - �000 x 800 x 53mm RH

RD593AD - �000 x 800 x 53mm LH RD594AD - �200 x 800 x 53mm RH RD595AD - �200 x 800 x 53mm LH

•

Vertical/horizontal performance

• • •

max 10m 21

269 208

742

170

278

800

1000/1200

PUMP

max 30m

PUMP

max 20m

Easy to install – in as little as 2 hours for one person ompatible with most wall-hung bowls (not included) C 37cm range of travel even when seated Allows easier sitting and standing Supports weights of up to 150kg Simple to use remote control panel, removes need to twist for flushing Stylish, neutral design integrates with bathroom décor Unit panel can be personalised: painted, framed or semi-recessed Suits horizontal and vertical discharge connection Optional armrests available Can be combined with a Sanipack Pro Up macerator

1321

800/900

278

•

800/900

208

The Sanimatic is designed to make life easier for anyone with limited mobility. This ingenious toilet system gives the user adjustable height control to accommodate any accessibility requirements and includes remote flushing to remove the need to twist around.

This low profile shower tray is equipped with an external wastewater pump, making it an ideal solution for installing a shower almost anywhere with minimal disruption, as no excavation is required. Tray height is only 53mm for easy access.

269

Product Ref: 1116

170

138 53

Discharge Pipework 22/32 mm

Working Waste Water Temp 35°C

Amplitude of Movement 370mm. Low of 380mm to a high of 750mm

Mobile Panel In white ABS, can be painted

Motor Power 250 Watts

Product Weight 3.5kg (pump only)

Operation By hard wired remote control handset

Voltages 220-240 V/50 Hz

IP Rating IP44

Motorised Frame 742 Treated steel with lifting capability of 150kg

Cistern 6L with push button flush or via the handset

Pan Fixing axis 180–230mm

Discharge height (m) 5,5 1321

5,0 4,5 4,0 3,5 3,0 2,5 2,0 �,5 �,0 0 �0 20 30 40 50 Flow rate (l/min)

�6

www.saniflo.co.uk

�7

Products Ref: 1900/1901/1902

Designed to provide easy access for en-suite bathroom applications, convenient covers allow you to service and maintain the macerator without having to remove it. Suitable for new installations.

Why choose this product? Easy service access Suitable for one WC only Easy maintenance without removal of unit Suitable for new installations Quiet technology

22 22 66 66 40 40

Saniaccess is primarily intended for new installations as the inlet and outlet positions vary from other Saniflo models.

330 330

• • • • •

84 84

Vertical/horizontal performance 376 376

5m 4m 3m 2m 1m

392 392

max 20m max 40m max 60m max 80m max 100m

22 66 40

330

Double access: A Direct access to the basket in case of blockage due to misuse B Direct access to electric components

376 424

Discharge height (m) 9

Voltages 220-240 V/50 Hz Working Waste Water Temp 35°C

Inlet Pipework 40mm IP Rating IP44

8 7

226

8 45

4 3 2 � �0 20 30 40 50 60 70 80 90

Flow rate (l/min)

�8

226

333

Motor Power 400 Watts

Product Weight Saniaccess � and 2 - 5.8kg Saniaccess 3 - 6.4kg

333

Discharge Pipework 22 / 28 / 32 mm

www.saniflo.co.uk

44 378

378

494

44 3

�9

Product Ref: �903

Product Ref: �082/2

Designed to provide easy access for grey water pumping applications such as kitchens and utility rooms. Convenient covers allow simple service and maintenance of the pump without having to remove it.

The Sanicondens® Best is specifically designed for disposal of acidic concentrate from boilers and other water producing equipment such as air conditioning units, refrigeration units and dehumidifiers etc. Incorporates a pH neutralising granule tray and includes a non-return valve and 6m flexible discharge pipe.

Suitable for new installations.

Why choose this product?

• Easy service access • Suitable for grey water • Easy maintenance without removal of unit • Suitable for new installations • Quiet technology • Two side inlets and optional top inlet

• Designed to dispose of acidic condensate • 2 litre tank • Integrated pH neutralising granule tray • Four entry points • Working temperature of 35°C. Will handle temperatures up to 80°C for short periods and a minimum pH of 2.5

Saniaccess Pump is primarily intended for new installations as the inlet and outlet positions vary from other Saniflo models.

Vertical/horizontal performance 5m 4m 3m 2m 1m

max 10m

Double access:

Vertical/horizontal performance

A Direct access to the basket in case of blockage due to misuse

4.5m

max 30m

Outlet

max 20m

max 30m

max 40m

Inlet

max 10m

B Direct access to electric components

max 20m

Inlet Inlet

max 40m

max 50m

300

max 50m

300

1% 1% 8

69 4

Sanicondens Best 333

The tank of the Sanicondens Best has a float which controls the pump. When the condensate gathers in the tank the pump is activated. The product has its own neutralization tray to adjust the pH of the acidic water from the condensing boiler. Sanicondens Best is also fitted with a second float that can control an alarm. 44 438

3 .5

494

Discharge Pipework 32 mm

Product Weight 6.4kg

Motor Power 400 Watts

Inlet Pipework 40mm

Voltages 220-240 V/50 Hz

IP Rating IP44

Accessories supplied with the product: Non-return valve, wall fixing kit, 2 inlet adaptors, connection for an alarm, 2 metres of electric cable, 6 metres of drainage pipe.

280

Working Waste Water Temp 75°C Discharge height (m)

254

280

Discharge Pipework 8mm

Working Waste Water Temp 35°C/Max 80°C (intermittent)

Motor Power 60 Watts

Product Weight 2.6kg

Flow Rate 342L/h

Inlet Pipework 28mm

Voltages 220-240 V/50 Hz

IP Rating IP20

Tank Volume 2L

9 8 7

Discharge height (m)

6 5

3 2 � �0 20 30 40 50 60 70 80 90 Flow rate (l/min)

Replacement neutralising granule packs available

www.saniflo.co.uk

2 � 0

�

Flow rate (l/min)

2�

Product Ref: �082/5

Product Ref: ��33

The Sanicondens® Pro is specifically designed for disposal of acidic concentrate from boilers and other water producing equipment such as air conditioning units refrigeration units and dehumidifiers etc. Includes a non-return valve and 6m flexible discharge pipe. Similar to Sanicondens® Best, but for use where a neutralising tray is not required.

The Sanicondens® Eco is specifically designed for disposal of acidic concentrate from boilers and other water producing equipment such as air conditioning units refrigeration units and dehumidifiers etc. Similar to Sanicondens Best®, but has a smaller tank capacity.

Why choose this product?

• Designed to dispose of acidic condensate • 2 litre tank • Two entry points • Working temperature of 35°C. Will handle temperatures up to 80°C for short periods and a minimum pH of 2.5 • For use where a neutralising tray is not required • Supplied with 2m of electric cable and 6m of drainage pipe

• Designed to dispose of acidic condensate • � litre tank • Four entry points • Working temperature of 35°C. Will handle temperatures up to 80°C for short periods and a minimum pH of 2.5 • For use where a neutralising tray is not required • Supplied with 2m of electric cable and 6m of drainage pipe

Vertical/horizontal performance

23 97

4.5m 4m

max 15m

3m 2m 1m

max 15m

4.5m 260

max 20m max 30m

max 20m

242

max 30m

max 40m 69

Discharge Pipework 8/��mm

max 40m

max 50m

Working Waste Water Temp 35°C/Max 80°C (intermittent)

Motor Power 60 Watts

Product Weight �.3kg

Flow Rate 342L/h

Inlet Pipework 28mm

Voltages 220-240 V/50 Hz Discharge Pipework 8/��mm

Working Waste Water Temp 35°C/Max 80°C (intermittent)

Motor Power 60 Watts

Product Weight 2kg

Flow Rate 342L/h

Inlet Pipework 28mm

Voltages 220-240 V/50 Hz

IP Rating IP20

5 4 3 2 � 0

• D esigned to neutralise the acidic concentrate88from a boiler 62

0 � 2 3 4 5 6 Flow rate (l/min)

Why choose this product?

The Sanineutral will neutralise the acidic condensate from a boiler before the waste is drained away, hence protecting pipework and the environment from damage. It works without a pump but can be placed in the pipework before a Sanicondens® Pro or Eco.

IP Rating IP20

Discharge height (m)

Tank Volume 2L

Product Ref: 1082/4

Tank Volume �L

• S uitable for condensing boilers up to 50kW • R eplaceable neutralising granule packs • Easy maintenance and fits on the wall or floor • Top or side entry options

www.saniflo.co.uk

285

Discharge Pipework 40mm

ø40 95

Working Waste Water Temp 60°C Tank Volume �.2kg

285

Product Weight �.7kg Inlet Pipework Top 32mm / Side 40mm

ø40 88

Replacement neutralising granule packs available

Product Ref: ��32

Product Ref: ��3�

The Sanicondens® Clim Pack has been specifically designed to expel the condensate from air conditioning units. The pack contains the Clim Mini pump plus trimmable trunking for a neat finish.

The Sanicondens® Clim Mini has been specifically designed to expel the condensate from air conditioning units.

Why choose this product?

• Designed for air conditioning units • Supplied with trunking that can be trimmed to size • Very quiet operation

Why not use the Sanicondens Clim Pack to get a neat decorate finish? See opposite.

Inlet ø7

Motor Power 22 Watts

Product Weight 3kg

Voltages 220-240 V/50 Hz

IP Rating IP20

49 ø0

ø5

49 ø0

ø5

�

Flow Rate �5L/h

Vertical suction in metres (A)

Min 350

Max 860

• D esigned for air conditioning units • Very quiet operation

Discharge Pipework 8.5/�0.5mm

62 �.5

37 37

ø7

ø5

ø7

ø5

Vertical pumping in metres (B)

Horizontal pumping in metres (C) 5

�0

�

�0.4

9.�

8.3

7.3

8.9

7.8

7.0

6.4

7.9

7.�

6.3

5.8

7.0

6.0

5.3

4.9

�

8.9

8.3

7.5

5.9

7.8

7.3

6.7

6.�

6.9

6.7

5.7

5.4

5.9

5.5

4.9

4.4

�

7.8

7.6

6.9

6.5

7.�

6.6

6.2

5.7

6.5

5.7

5.�

4.8

5.5

4.8

4.2

3.9

ø7

Product Ref: ��34

An easy to install, discreet pump to expel the condensate from air conditioning units and refrigeration units. Discharge Pipework 8.5/�0.5mm

Flow Rate �5L/h

Motor Power 22 Watts

Product Weight 4kg

Voltages 220-240 V/50 Hz

IP Rating IP20

Why choose this product?

Installation diagram

• D esigned for air conditioning and refrigeration units • Prevents dripping • Very quiet operation • Easy installation

Discharge height (m) �6 �4

Product Weight 2kg

Motor Power �6 Watts

Flow Rate �2L/h

IP Rating IP24

Discharge height (m)

�2 �0

�0

8 6

145

4 2

57.5

6 4 2

0 2

4 6 8 �0 �2 �4 �6 �8

115

0 2

4 6

8 �0 �2 �4 Flow rate (l/min)

Flow rate (l/min)

Voltages 220-240 V/50 Hz

�4

�2

Discharge Pipework 8/�0mm

www.saniflo.co.uk

Benefit from our extended warranty

Product Ref: �095

The Sanialarm has a level pressure switch that triggers an alarm fixed on the top of a unit if the volume of water exceeds the maximum allowed level. The alarm emits a continuous warning sound, until it is switched off and the problem rectified. ®

Why choose this product? • Helps protect against flooding • 80dB buzzer • Added peace of mind • Easily and quick installation onto lid of Saniflo unit • Suitable for new and existing Saniflo installations • Fits most Saniflo products – see product selector for details

Power 2 x AAA batteries – �.5v (not included)

Weight 0.�7kg

In order to register your 3 year warranty extension, simply go to our website: saniflo.co.uk or fill in the warranty registration card inside the box and send it to us by post.

CLEANSER/DESCALER Product Ref: �085

Specifically created for use with Saniflo® units, the cleanser is a concentrated solution for optimum cleaning power and trouble-free maintenance.

Our 3 year warranty extension is applied to the new 2017 versions of Saniflo Up, Sanitop Up, Saniplus Up, Sanipro Up, Sanipack Pro Up, Saniwall Pro Up, Sanivite +, Sanishower + and Sanispeed +.

Why choose this product?

All other Saniflo products have a 2 year warranty period as standard.

• Ideally suited to Saniflo units • Won’t damage septic tanks • Comes in a 5 litre bottle for multiple applications • Prolongs unit life and efficiency • Use more frequently in hard water zones Weight 5.8kg per 5L bottle

www.saniflo.co.uk

Correct Saniflo installation? Check out the �0 Golden Rules �

1% Fall

If a vertical lift is needed, this should be as close to the start of the run as is practically possible and from the highest point there must be a minimum �% fall. The closer the vertical lift is to the machine, the more efficient the pump will be.

Bends should be smooth/long radius. This principle is true for all pipe sizes. Plastic

22mm Copper

Bends should not be tight radius. All pipework should be supported according to pipe manufacturers recommendations.

Discharge pipework should be copper or rigid solvent weld plastic, not ‘pushfit’. �% fall on horizontal runs.

Pipes entering the Saniflo should have a gravity fall of 3%.

Where the pipework falls significantly below the unit e.g. a lower floor, fit an air admittance valve at the highest point capable of withstanding �0psi pressure, or increase pipe size coming down to ‘break’ syphon.

The unit should be easily accessible and removable in the event of maintenance being required. if boxed in, the boxing should be easily removed. Any extension between the WC pan spigot and wall should not exceed 200mm.

Min 0.5m

200mm max

3% Fall

Each Saniflo discharge pipe should run separately to the soil pipe. If wastes are combined, it can only be into a larger pipe, which is on a gravity fall.

�0

Since many closed coupled WC suites do not have the space between the WC pan spigot and the wall, you may have to batten the cistern off the wall to make room for the Saniflo. However Sanislim will fit behind most closed coupled WC suites without the need for this.

Position the Saniflo behind the toilet not beneath it.

Saniflo offer a complete range of pumps and macerators for all applications. Download our e-learning Module: www.saniflo.co.uk/training/elearning

Electrical connection should be via an unswitched fixed wiring connector with a 5 amp fuse for Domestic range macerators. Professional range may vary – check individual instruction manual.

Macerators may only be used in a dwelling where there is access to a gravity discharging WC (Building Regs G4).

Saniflo Ltd. Howard House, The Runway, South Ruislip, Middx. HA4 6SE Tel: 020 8842 0033 Fax: 020 8842 �67� e-mail: sales@saniflo.co.uk

Saniflo – the facts Saniflo macerator pumps and lifting stations reduce waste to liquid form and discharge through small-bore pipework to a soil stack204 or sewer. 54 real economies in labour and structural work by This means eliminating conventional four inch gravity discharge pipework. Saniflo units activate automatically when the cistern is flushed.

507

255

267

252

The units are quiet and economic to use and are simply connected to the domestic electrical supply, via an unswitched fused spur. The units are specifically designed for use in damp and steamy conditions and the powerful induction motors are sealed for life. Thermal overload cut-outs are fitted to help protect them from abuse. Only the highest quality, non-corroding materials and components are used. Moving parts are minimised for maximum reliability and durability. All our products are designed and manufactured in France and rigorously tested in our factory. We have years of experience in the market, constantly refining and improving our technology and we are confident on their reliability. As part of the SFA Group, Saniflo are committed to an integrated quality and environmental management system and our business and factory complies with ISO 900� and ISO �400�.

COMMERCIAL LIFTING STATIONS

ø50

ø70

2017

ø50

Not sure which Saniflo unit to specify? Lift the flap for a full ready-reference guide as to which of our units is best suited to your specific installation.

94 ø80/ 00

Saniflo Limited Howard House, The Runway, South Ruislip Middlesex HA4 6SE, United Kingdom Tel 020 8842 0033 Fax 020 8842 �67� Web www.saniflo.co.uk As our policy is one of continuous product improvement we reserve the right to alter product

ø 00/ 0/ 25

specification without notice. All information in this publication is given in good faith. No

ø 00/ 0/ 25 can be accepted for any errors, omissions or incorrect assumptions. 01/�7 29671UK responsibility

Our product range has been divided into Domestic and Commercial categories to make it simple to find the product you’re looking for, quickly and easily.

Washing Machine

All of our units can be used in any of these situations: Basement, Ground Floor, Upper Floor, Loft/Attic — just choose the right product for your installation...

Power shower

CONTENTS

Wall-hung WCs

PRODUCT SELECTOR

COMMERCIAL

6101

SANICUBIC �

6�02

SANICUBIC 2 PRO

10-1�

6103

SANICUBIC 2 CLASSIC

12-13

Ref �053

6105

SANICUBIC 2 XL (SINGLE PHASE)

14-15

SANICOM �

6305

SANICUBIC 2 XL (THREE PHASE)

16-17

6106

SANIFOS 110 (SINGLE PHASE)

6107

SANIFOS 250 (SINGLE PHASE)

6�08

SANIFOS 500 (SINGLE PHASE)

6308

SANIFOS 500 (THREE PHASE)

A bath in the basement, a loo in the loft or a shower under the stairs!

6�09

SANIPUMP

Wherever you need access to conventional drainage but there’s none

Alarm�

Sink3

SANICOM 2

Dishwasher

�046/2

Bidet

Shower

SANICOM �

Bath

SANIBEST PRO

�046/�

Wash Basin

�053

SANISPEED +

N EW

SANISPEED + Ref 6045

SANIBEST PRO Ref �046/1

SANICOM 2 Ref �046/2

N EW

SANICUBIC � Ref 610�

SANICUBIC 2 PRO

N EW

SANICUBIC 2 CLASSIC Ref 6103

Ref 6�02

SANICUBIC 2 XL

SANIFOS 110

SANIFOS 250

SANIFOS 500

SANIPUMP

SANICUBIC 2 XL

(SINGLE PHASE) Ref 6105

(THREE PHASE) Ref 6305

(SINGLE PHASE) Ref 6106

(SINGLE PHASE) Ref 6107

(SINGLE PHASE) Ref 6108

(THREE PHASE) Ref 6308

Ref 6�09

Saniflo works where convention doesn’t.

6045

8-9

Because Saniflo products are perfect for unconventional situations where drainage is a problem, you’ll be able to say ‘yes’ to your customers more often. More jobs each month and more revenue for your business.

close by, Saniflo probably has a product to help you find a solution.

ACCESSORIES

��07

4"/�00mm ISOLATING VALVE

��09

2"/50mm ISOLATING VALVE

��08

CARBON AIR FILTER

Having brought the macerator concept to the UK almost 40 years ago, we now have a huge range of over 30 products including macerator pumps, lifting stations and integrated sanitaryware; all designed to

ø50

ø70

work with small bore pipework that’s easy to install and run to the

nearest soil pipe. You’ll find they’re now very quiet and unobtrusive in

operation and with many slim-line models available; easy to hide away.

ø50

All our products are designed and manufactured in France and

rigorously tested in our factory. We have a wealth of experience in the Sanialarm can be fitted to these units if required.

market – 55 years of continuous development and testing goes into

Sanialarm is fitted to these units as standard.

each device – constantly refining and improving our products and we’re

�

If connected to a kitchen sink, a grease trap must be fitted.

so confident in their reliability they’re guaranteed for 2 years. Saniflo UK also has a national network of over �00 service engineers available to your customers supporting the product day in day out,

Our guarantee

meaning worry free installation for plumbers and end users.

Saniflo units are fully guaranteed for up to five years and backed by a nationwide service network of skilled and experienced engineers, see page 28 in ‘Pumps and Macerators’.

All you need to do is think of the possibilities.

94 ø80/ 00

ø 00/ 0/ 25

Technical Advice / Spares: 020 8842 0033 Service Engineer Linkline: 0345 765 00�� Visit our official website www.repairs.saniflo.co.uk for a full listing of service engineers by geographical area.

Please phone from a landline from the unit location in order to be connected to your local service engineer.

944

Our pumping systems are designed for the disposal of normal organic waste product, water or paper. They are not intended to replace kitchen waste or sanitary waste disposal units. As our policy is one of continuous improvement we reserve the right to alter product specifiction and price without notice. All information in this publication is given in good faith. No responsibility can be accepted for any errors, omissions or incorrect assumptions. Illustrations are diagrammatic and should be regarded only as indicative of technical requirements. All vertical pumping distances are measured from base of unit.

www.saniflo.co.uk 73

COMMERCIAL

Tough conditions require tough products and the Saniflo commercial range now has 14 products that are robust enough to perform in some of the most demanding situations.

THE (R)EVOLUTION CONTINUES

Having manufactured Saniflo products for over 55 years, no other manufacturer has the years of experience and expertise to produce such a comprehensive range of units for commercial applications. Think of the possibilities…

SANIFLO: PLUMBING THE POSSIBILITIES SINCE 1958 • Removable motors and water level indicators for easy servicing and maintenance • Positioning, inlet and discharge pipework remain the same

GYM

• Easy to disassemble and reassemble

Need to install multiple showers? The Sanicom 2 will do the job See page 7 Public toilets for the gym? Try Sanicubic 2 Classic

OUR COMMERCIAL RANGE – EVEN MORE INNOVATIVE FOR EASE OF USE

See pages 12-13

NEW for commercial installations

Need extra facilities for the employees? – All possible with a Sanibest Pro

OFFICES

See page 5 Office kitchen getting used all day – A Sanispeed + keeps it working See page 4

CAFÉ & BAR Busy Café? A Sanicom � for the glass washer See page 6 Kitchen water waste from the café? Try a Sanispeed + See page 4

PUBLIC TOILETS & BOILER ROOM See page 10

See page 08

Ensure public toilets never let you down – Use Sanicubic 2 Pro See pages 10-1�

See page 12

SINGLE PHASE See page 14

Alarm

Sink

Dishwasher

Washing Machine

Bidet

Power Shower

Shower

Bath

See page 16

Wash Basin

THREE PHASE

Wall-hung WCs

AVAILABLE Q3 2017

Products suitable for a whole variety of applications. (Just refer to each of the product keys on the relevant pages). 2

www.saniflo.co.uk

EW N

Product Ref: 6045

Product Ref: �053

Ideal for light commercial environments such as small shops, cafés, offices, bars and dental surgeries where grey waste water needs to be disposed of. Sanispeed® + deals with grey water from a shower, basin, bath, bidet, washing machine, dishwasher and sink.

Sanibest® Pro is a heavy duty macerator suitable for heavy usage public or commercial environments. Handles connection to a WC, basin, bidet and shower.

Why choose this product?

• Ideal for light commercial applications • Low activation level (95mm) • Robust motor • Four inlets – two side entries and two cover entries • Working temperature of 35°C. Will handle up to 75°C for short periods • Meets European standard EN�2050-2 • Carbon filter included to neutralise odours

• Ideal for heavy usage applications • Three inlets – two side entries and one cover entry • Working temperature of 35°C • Meets European standard EN�2050-3

Vertical/horizontal performance

Outlet Ø32

Inlet ø40

Inlet Ø40

Vertical/horizontal performance

max 5m

7.5m 7m

Inlet Ø40

max 10m

max 20m

6m 5m

Inlet Ø40

max 30m

max 40m

4m 3m

max 50m max 60m max 70m max 80m max 90m max 100m max 110m

Cover allows easy access to electronic components

max 50m 367 266

max 60m

max 70m

190

204

556 507

ø32

256

278 320

269

252

ø40

Up to 5 years warranty See page 27 of ‘Pumps and Macerators’ section

368

Discharge Pipework 32mm

Product Weight 6.4kg

Discharge Pipework 32mm

Product Weight 35kg

Motor Power 400 Watts

Inlet Pipework 40mm

Motor Power ��00 Watts

Inlet Pipework 40mm

Voltages 220-240 V/50 Hz

IP Rating IP44

Voltages 220-240 V/50 Hz

IP Rating IP44

Working Waste Water Temp 35°C/Max 75°C (intermittent)

Working Waste Water Temp 35°C

Discharge height (m)

8 7

7 6

�

� 0

0 20 40 60 80 �00

70 80

90 �00

��0 �20

�30

�40 �50

Flow rate (l/min)

Robust blade suitable for heavy usage

www.saniflo.co.uk

Product Ref: �046/�

Product Ref: �046/2

Sanicom® � is an automatic, powerful lifting station for grey water used in busy commercial environments. Suitable for multiple connections including a basin, bath, shower, bidet, sink, dishwasher and washing machine.

Identical to Sanicom® � but features two powerful motors where the second motor is a failsafe back-up to ensure that you always have continuity of service for your business.

Why choose this product?

• Ideal for commercial applications e.g. cleaning and catering sinks • Heavy duty, safe, reliable pump • Unit operates automatically • Two 40mm side entries and air vent/connection to exterior • Working temperature of 35°C • Will handle up to 90°C for short periods

• • • • • • •

Inlet Ø40

max 20m

11m 10m

max 30m

max 40m

max 50m

4m 3m

max 60m

max 70m

max 80m

5m 4m

max 10m

ø32

Inlet Ø40

max 30m max 40m max 50m

max 80m

max 100m

Motor Power 750 Watts

ø50

45 467

65 480

Discharge Pipework 50mm

Working Waste Water Temp 35°C/Max 90°C (intermittent)

Product Weight �2kg

Motor Power �500 Watts x 2

Product Weight 26kg

Voltages 220-240 V/50 Hz

Inlet Pipework 40mm

Voltages 220-240 V/50 Hz

Inlet Pipework 40 / 50mm

Tank Volume �0L

IP Rating IP44

Tank Volume 34.5L

IP Rating IP44

Connection to soil and vent pipe or drain

Discharge height (m)

Discharge height (m) 18

14 12

8 6

External hard-wired audio visual alarm (3m cable).

2 0

0 20 40 60 80 100 120 140

4 2 0

50 100 150 200 250 300 Flow rate (l/min)

Flow rate (l/min)

ø40

max 110m

232

Working Waste Water Temp 35°C/Max 90°C (intermittent)

85 ø50

max 90m

Discharge Pipework 32mm

ø32 mm

ø40 mm

Connection to soil and vent pipe or drain

387

max 70m

66 700

442

max 60m

2m 72

ø40

Ventilation Ø50

Inlet Ø40

max 20m

3m 332

Outlet Ø50

Vertical/horizontal performance

480

max 10m

Outlet Ø32

Inlet Ø40

Inlet Ø40/50

320

Vertical/horizontal performance

Ideal for heavy commercial applications Safe, reliable pump plus backup motor Unit operates automatically Two 40mm side entries and air vent/connection to exterior Working temperature of 35°C Will handle up to 90°C for short periods External hard-wired alarm

www.saniflo.co.uk

I VA

A 2 Q

BL 7 LA 1 20

Product Ref: 610�

The Sanicubic® � is a robust macerator pump that has been designed for the discharge of waste from up to two WCs plus multiple grey water producing appliances in busy business environments and larger domestic situations.

Why choose this product?

Discharge height (m)

• • • • • • • •

I deal for busy business environments and larger domestic situations Tough, reliable macerator pump New design with easily removable motor for servicing and maintenance Water level indicator unit can be easily removed for maintenance External hard wired audio visual alarm Features integrated non-return valves Centre heights of inlets �40mm Working temperature of 35°C. Will handle up to 70°C for short periods. (See Sanicom � and 2 for higher temperatures and longer periods) • IP67 rated • Cannot be connected to a Building Management System

Vertical/horizontal performance

9m 8m 7m 6m 5m 4m 3m 2m 1m

Motor Power �500 Watts

Product Weight 20kg

Flow Rate �3m3/h

Inlet Pipework 40 / 50 / 100 / 110mm

Voltages 220-240 V/50 Hz

IP Rating IP67

Tank Volume 32L

0 5 10 15 20 25 Flow rate (m3/h)

max 10m

570 460

max 20m Ø 110

max 30m

Ø 50

max 40m max 50m Outlet Ø50

Inlet Ø40/50 Ø�00/��0

max 60m max 70m

Inlet Ø40/50

max 80m max 90m max 100m max 110m

The Sanicubic tank is fitted with 2 dip tubes; one tube controls motor operation and the other controls the alarm system:

Inlet Ø40/50 Ø�00/��0

300 140

IP Ratings IP or “Ingress Protection” ratings specify the environmental protection that the product casing provides and are defined by international standards. They are used to explain levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies e.g. dust, dirt and moisture.

Ø 110

Ø 50

Remote hard-wired audio visual alarm Ø 110

�56

Sanicubic � has rating IP67 which gives protection against temporary immersion in water.

Inlet Ø40/50 Ø�00/��0

426

- Long pickup tube (normal operation): as soon as the waste water level in the tank reaches the triggering point in the long tube, the pumping system starts up. - Short pickup tube (inflow overload operation): if the waste water level in the tank reaches the upper point, a contact is closed and the auxiliary pumping system is triggered. The contact also sets off an audible and visual alarm.

ALARM

External hard-wired audio visual alarm (5m cable).

Ventilation Ø50

www.saniflo.co.uk

10m

Working Waste Water Temp 35°C/Max 70°C (intermittent)

Ø 110

11m

Note: Isolation valves must be fitted to the inlet pipework and discharge pipework to isolate the unit in case of the need for service – see page 23

Discharge Pipework 50mm

POWER

I VA

A 2 Q

BL 7 LA 1 20

Product Ref: 6�02

The Sanicubic® 2 Pro is a high performance macerating pump for commercial use. Contains two separate, load balanced pumps with high performance macerating systems and will operate alternately. In the event of inflow overload, both motors run at the same time, or in the unlikely event that one motor fails, the other one will take over.

Why choose this product? • • • • • • • • • • •

Discharge height (m)

I deal for busy business environments and larger domestic situations Tough, reliable macerator pump New design with easily removable motor for servicing and maintenance Water level indicator unit can be easily removed for maintenance Load balanced twin macerator pumps for a failsafe system Alternate activation ensures even wear of motors Two alarms for ultimate safety – hard-wired alarm plus remote wireless alarm Centre height of inlets �40mm Working temperature of 35°C. Will handle up to 70°C for short periods. (See Sanicom � and 2 for higher temperatures and longer periods) IP68 rated Can be connected to a Building Management System.

Note: Isolation valves must be fitted to the inlet pipework and discharge pipework to isolate the unit in case of the need for service – see page 23

Discharge Pipework 50mm

Working Waste Water Temp 35°C/Max 70°C (intermittent)

Motor Power �500 Watts x 2

Product Weight 33kg

Flow Rate �3m3/h

Inlet Pipework 40 / 50 / 100 / 110mm

Voltages 220-240 V/50 Hz

IP Rating IP68

Tank Volume 45L

0 5 10 15 20 25 Flow rate (m3/h)

Vertical/horizontal performance

9m 8m 7m 6m 5m 4m 3m 2m 1m

597

max 20m

Outlet Ø50

Inlet Ø40/50 Ø�00/��0

ø 50

max 30m

Inlet Ø40/50

ø 110

Inlet Ø40/50 Ø�00/��0

max 40m max 50m

490

10m

Ventilation Ø50

687

max 10m

max 60m max 70m

Inlet Ø40/50 Ø�00/��0

The Sanicubic tank is fitted with 2 dip tubes; one tube controls motor operation and the other controls the alarm system:

max 80m max 90m max 100m max 110m

Inlet Ø40/50 Ø�00/��0

- Long pickup tube (normal operation): as soon as the waste water level in the tank reaches the triggering point in the long tube, the pumping system starts up.

516

- Short pickup tube (inflow overload operation): if the waste water level in the tank reaches the upper point, a contact is closed and the auxiliary pumping system is triggered. The contact also sets off an audible and visual alarm.

140

Externally mounted control box 242

110

POWER

ø 110

ø 50 ø 50

ALARM

ø 50

186

187 MOTOR �

ø 110

Sanicubic 2 Pro has rating IP68 which gives protection against continuous submersion in water

299

ø 110

11m

MOTOR 2

Remote wireless alarm

�56

ALARM

Includes hard-wired alarm on externally mounted control box plus secondary high frequency remote wireless alarm.

POWER

SIGNAL INDICATOR

www.saniflo.co.uk

1�

I VA

A 2 Q

BL 7 LA 1 20

Product Ref: 6103

The Sanicubic® 2 Classic contains two separate, load balanced pumps with high performance macerating systems and will operate alternately. In the event of inflow overload, both motors run at the same time, or in the unlikely event that one motor fails, the other one will take over.

Why choose this product?

Discharge height (m)

• • • • • • • • •

I deal for busy business environments and larger domestic situations Tough, reliable macerator pump New design with easily removable motor for servicing and maintenance Water level indicator unit can be easily removed for maintenance Load balanced twin macerator pumps for a failsafe system Alternate activation ensures even wear of motors Two alarms for ultimate safety – both hard-wired Centre heights of inlets �40mm Working temperature of 35°C. Will handle up to 70°C for short periods. (See Sanicom � and 2 for higher temperatures and longer periods) • IP68 rated • Can be connected to a Building Management System

Note: Isolation valves must be fitted to the inlet pipework and discharge pipework to isolate the unit in case of the need for service – see page 23

Discharge Pipework 50mm

Working Waste Water Temp 35°C/Max 70°C (Intermittent)

Motor Power �500 Watts x 2

Product Weight 36kg

Flow Rate �3m3/h

Inlet Pipework 40 / 50 / 100 / 110mm

Voltages 220-240 V/50 Hz

IP Rating IP68

Tank Volume 45L

0 5 10 15 20 25 Flow rate (m3/h)

Vertical/horizontal performance

8m 7m 6m 5m 4m 3m 2m 1m

597

Inlet Ø40/50

ø 110

max 40m

Inlet Ø40/50 Ø�00/��0

max 50m max 60m max 70m

Inlet Ø40/50 Ø�00/��0

The Sanicubic tank is fitted with 2 dip tubes; one tube controls motor operation and the other controls the alarm system:

max 80m max 90m max 100m max 110m

Inlet Ø40/50 Ø�00/��0

- Long pickup tube (normal operation): as soon as the waste water level in the tank reaches the triggering point in the long tube, the pumping system starts up.

516

140

Externally mounted control box 242

110

POWER

ø 110

ø 50 ø 50

ALARM

ø 50

186

187 MOTOR �

ø 110

Sanicubic 2 Classic has rating IP68 which gives protection against continuous submersion in water.

299

MOTOR 2

Remote wireless alarm

Includes hard-wired alarm on externally mounted control box plus secondary hardwired audio visual alarm with 5m cable, so it can be placed remotely.

Outlet Ø50

Inlet Ø40/50 Ø�00/��0

ø 50

max 30m

�56

ALARM

Ventilation Ø50

687

max 20m

490

10m

max 10m

ø 110

11m

POWER

SIGNAL INDICATOR

www.saniflo.co.uk

SINGLE PHASE Product Ref: 6105

The Sanicubic® 2 XL is one of our largest lifting stations for commercial use handling up to 40m3/hour of black water via two 2kW pumps. It is easy to install as it stands on the floor and does not need to be positioned below ground.

Why choose this product? • Ideal for large volume commercial situations • Large bore vortex pump which can pump away waste without the need to macerate • Easily removable motors for servicing and maintenance • Large �20 litre tank volume • Easy to install – no need to excavate • Two alarms for ultimate safety – both hard-wired • T wo integrated non-return valves and four inlets: 40/50/�00/��0mm and one inlet 40/50mm • Centre height of inlets �80mm • W orking temperature of 35°C. Will handle up to 70°C for short periods. (See Sanicom � and 2 for higher temperatures and longer periods) • IP68 rated • Volt free contact for connection to a Building Management System

Tank Volume �20L

Motor Power 2000 Watts x 2

Working Waste Water Temp 35°C/Max 70°C (Intermittent)

Flow Rate 40m3/h

12 9 ø50

ø50

ø70

6 3

ø50

ø70

�8 �5

IP Rating IP68

ø50

Product Weight ø50 59kg

ø70

Voltages 220-240 V/50 Hz

Note: Isolation valves must be fitted to the inlet pipework and discharge pipework to isolate the unit in case of the need for service – see page 23

Discharge height (m)

Discharge Pipework 100 mm up to 6m/ 80mm thereafter

ø50

0 10 20 30 40 50 60 70 Flow rate (m3/h)

ø50

Vertical/horizontal performance

max 30m

Inlet Ø40/50 Ø�00/��0

max 40m

ø80/ 00

Inlet Ø40/50 Ø�00/��0

max 50m

6m 5m 4m 3m 2m 1m

max 60m

ø 00/ 0/ 25

Inlet Ø40/50 Ø�00/��0

max 80m max 90m

ø 00/ 0/ 25

ø80/ 00

ø 00/ 0/ 25

max 100m max 110m

ø 00/ 0/ 25

ø 00/ 0/ 25 944

944

IP Ratings IP or "Ingress Protection" ratings specify the environmental protection that the product casing provides and are defined by international standards. They are used to explain levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies e.g. dust, dirt and moisture.

Max pumping height 13m at 0 flow rate

Inlet Ø40/50 Ø�00/��0

ø 00/ 0/ 25 ø80/ 00

max 70m

Inlet Ø40/50

Outlet Ø80/�00

max 20m

10m

Ventilation Ø75

Externally mounted control box 242

944 73

110

POWER ALARM

186

187

Sanicubic 2 XL has rating IP68 which gives protection against continuous submersion in water.

MOTOR �

Remote hard-wired audio visual alarm

822

�56

ø50

www.saniflo.co.uk

POWER

822

ALARM

822

Includes hard-wired alarm on externally mounted control box plus secondary hardwired audio visual alarm with 5m cable, so it can be placed remotely.

MOTOR 2

I VA

A 3 Q

BL 7 LA 1 20

THREE PHASE Product Ref: 6305

The Sanicubic® 2 XL is one of our largest lifting stations for commercial use handling up to 55m3/hour of black water via two 3200W pumps. It is easy to install as it stands on the floor and does not need to be positioned below ground.

Tank Volume �20L

Motor Power 3200 Watts x 2

Working Waste Water Temp 35°C/Max 70°C (Intermittent)

Flow Rate 55m3/h

12 9 ø50

ø50

ø70

6 3

ø50

ø70

�8 �5

IP Rating IP68

ø50

Product Weight ø50 60kg

ø70

Voltages 230-400 V/50 Hz

Note: Isolation valves must be fitted to the inlet pipework and discharge pipework to isolate the unit in case of the need for service – see page 23

Discharge height (m)

Discharge Pipework 100 mm up to 6m/ 80mm thereafter

ø50

0 10 20 30 40 50 60 70 Flow rate (m3/h)

ø50

Ventilation Ø75

Vertical/horizontal performance

Outlet Ø80/�00 Inlet Ø40/50

8m 7m 6m

Inlet Ø40/50 Ø�00/��0

ø 00/ 0/ 25 ø80/ 00

max 60m

Inlet Ø40/50 Ø�00/��0

max 70m

ø 00/ 0/ 25

ø80/ 00

ø 00/ 0/ 25

max 80m max 90m

5m 4m 3m 2m 1m

ø 00/ 0/ 25

94 ø 00/ 0/ 25

max 50m

max 100m 944

max 110m max 120m max 130m max 140m

10m

max 40m

944

11m

ø80/ 00

Inlet Ø40/50 Ø�00/��0

max 30m

12m

Inlet Ø40/50 Ø�00/��0

max 20m

13m

max 10m

14m

242

944 73

Externally mounted control box 110

POWER ALARM MOTOR �

Remote hard-wired audio visual alarm

822

�56

ø50

www.saniflo.co.uk

POWER

822

ALARM

822

MOTOR 2

186

187

Max pumping height 16m at 0 flow rate

UNDERGROUND PUMP STATIONS THE (R)EVOLUTION CONTINUES

With over 55 years of designing and manufacturing both domestic and commercial macerators and pumps, Saniflo has all the credentials to produce our new range of underground pump stations. New for 2017, this range includes our submersible drainage pump and our largest lifting stations that can be used for pumping residential and commercial waste water from flats, plants or public buildings.

ALLOWS A PUMPING STATION TO BE SITED: • Below ground • External to a building • Where the drainage is too low for the sewer • Where the drainage is too low for a surface mounted pumping station

NEW for Q3 2017 Automatic underground pumping stations for the collection and lifting of domestic sewerage and waste water

250

250 SINGLE PHASE See page 20

500

110

SINGLE PHASE See page 21 THREE PHASE See page 22

• Sanifos range has both one and two pump products • Single and three phase versions • Powerful automatic motors with quiet operation • Easy handling for installation below ground level

WHOLE HOUSE DRAINAGE WITH HIGH LEVEL SEWER Multiple applications with maximum use? The Sanifos 500 will cope with this no problem, and give you peace of mind with twin motors. See pages 21 and 22 Fewer applications and less use? The Sanifos 250 will do the job. See page 20

Alarm

Sink

Dishwasher

Washing Machine

Bidet

Power Shower

Shower

Bath

110 SINGLE PHASE See page 20

Wash Basin

500 Wall-hung WCs

• Waste water pump with cutting system • Externally fitted float switch • Quiet operation

250

See page 23

Products suitable for a whole variety of applications. (Just refer to each of the product keys on the relevant pages).

500

110

SINGLE PHASE Product Ref: 6108

110

max 100m

8m 7m

max 30m

587

4m 3m

2m 1m

Max pumping height 14m at 0 flow rate

Discharge Pipework 40 / 50mm

Working Waste Water Temp 70°C (max 5 minutes)

Motor Power 1500 Watts

Flow Rate 11m3/hour

Voltages 220-240 V/50 Hz

Inlet Pipework 50 / 40 / 100 / 110 / 125mm

Tank Volume 110L / 250L

IP Rating IP68

max 60m max 70m max 80m

934 934

max 100m

Max pumping height 14m at 0 flow rate

1272 1272

max 110m Discharge Pipework 40 / 50mm

Working Waste Water Temp 70°C (max 5 minutes)

Motor Power 1500 Watts x 2

Flow Rate 11m3/hour

Voltages 220-240 V/50 Hz

Inlet Pipework 50 / 40 / 100 / 110 / 125mm

Tank Volume 500L

IP Rating IP68

Discharge height (m)

Discharge height (m) 16

4 6 8

10 12 Flow rate (m3/h)

O1030 O1030

max 90m

0 2

886 886

O100

O50

O100 300

O50 325

180

982 982

O823 O823

O70 O70

max 50m

max 110m

300 300

max 40m

348 348

max 90m

696

max 20m

30 30

max 80m

696

10m

max 10m

167 167

max 70m

O550 O550 O740 O740

11m

180 90 587

O70 O70

max 60m

130 130

94 60

277 180

max 50m

300

325

O40 316 166 316

924 924

886 886

O100 O100

530 530

710710

max 40m

Vertical/horizontal performance

674 80

max 30m

277 180

674 80

max 20m

3030

555 555

10m

max 10m

280 280 150150 150150

11m

O50 O50

Vertical/horizontal performance

166

O40

Sanifos 110

176176

O40 O40

Sanifos 250

176 176

• D esigned for drainage of a single dwelling with multiple storeys, incorporating WC, bathroom, kitchen and utility room. • Contains two separate load balanced pumps with high performance macerating systems that will operate alternately for a failsafe system. • In the event of inflow overload, both motors run at the same time, or in the unlikely event that one motor fails, the other one will take over. • Alternate activation ensures even wear of motors • Robust cutting blades to prevent clogging • 500 litre storage tank • Powerful automatic motors with quiet operation • Easy handling for installation below ground level

555 555 O100 O100 530 530

• D esigned for drainage of a single dwelling incorporating WC, bathroom, kitchen, utility room. • Single grinder pump with float activation method • Robust cutting blades to prevent clogging • Two sizes: 110 litre and 250 litre storage tanks • Powerful automatic motor with quiet operation • Easy handling for installation below ground level

O50 O50

Why choose this product?

710 710

Why choose this product?

O40 O40

A dual motor lifting station that can be used for pumping residential or industrial waste water when the sewer is at too high a level for natural gravity drainage.

167 167

An automatic lifting station that can be used for pumping residential or industrial waste water when the sewer is at too high a level for natural gravity drainage.

500

Product Ref: 6106/6107

BL 7 LA 1 20

BL 7 1 20

SINGLE PHASE

250 500

I VA

A 3 Q

I VA

A 3 Q

110 /250

0 2

4 6 8

10 12 Flow rate (m3/h)

www.saniflo.co.uk

110

BL 7 LA 1 20

BL 7 1 20

THREE PHASE Product Ref: 6308

I VA

A 3 Q

I VA

A 3 Q

500

Product Ref: 6109

A dual motor lifting station that can be used for pumping residential or industrial waste water when the sewer is at too high a level for natural gravity drainage.

A submersible sump pump with macerator blades for use in domestic and commercial situations. The ideal solution for waste water and sewage disposal from underground pits and tanks.

Why choose this product?

• B lack water pump for use with WC, bathrooms, kitchens and utility rooms • C an also be used for grey water when pumping away from a pit or flood water situation • C ompact in design, easy to install and ready to use • A utomatic motor with float system activation

10m

886 886

934 934

176 176

max 40m

max 60m

300 300

max 80m

O823 O823

O70 O70

O1030 O1030

max 100m

8m 6m 4m 2m 1m

max 120m max 140m max 160m

max 10m max 20m max 30m max 40m max 50m

4m 3m 2m

max 180m

max 200m

382

max 60m

5m 30 30

12m

10m

348 348

14m

max 20m

167 167

16m

Vertical/horizontal performance 11m

167 167

18m

555 555 O100 O100 530 530

Vertical/horizontal performance

O50 O50

710 710

O40 O40

• R obust macerator cutting system

max 70m max 80m max 90m max 100m 265

max 110m

1272 1272

Max pumping height 21m at 0 flow rate

Discharge Pipework 40 / 50mm

Working Waste Water Temp 70°C (max 5 minutes)

Motor Power 5600 Watts x 2

Flow Rate 15.5m3/hour

Voltages 230-240 V/50 Hz

Inlet Pipework 50 / 40 / 100 / 110 / 125mm

Tank Volume 500L

IP Rating IP68

Max pumping height 14m at 0 flow rate

Discharge Pipework 40 / 50mm

Working Waste Water Temp 35°C/Max 70°C (intermittent)

Motor Power 1500W

Flow Rate 11m3/hour

Voltages 220-240 V/50Hz

IP Rating IP68

Discharge height (m)

Discharge height (m) 21

14 12

0 2 4 6 8 10 12 14 16 18 20

0 2

4 6 8

10 12 Flow rate (m3/h)

Flow rate (m3/h)

www.saniflo.co.uk

ISOLATING VALVES Product Ref: 2" ��09 / 4" ��07

Designed for use with the Sanicubic® range, isolating valves allow you to carry out maintenance on lifting stations easily, quickly and without restrictions. Available in 2"/50mm and 4"/�00mm sizes.

Why choose this product? • Allows convenient maintenance • Designed specifically for use with the Sanicubic range

2"/50mm

4"/100mm 120

120

390

390 175

300

Weight �.44kg

180

300

125

Weight �.86kg

CARBON AIR FILTER Product Ref: �108

For use with waste water and sewerage pumping systems where a vent to the atmosphere is not possible. Contains an activated carbon filter ideal for removing unpleasant odours and gaseous contaminates from an air stream. Also allows two-way air passage to enable the pump unit to breathe.

Why choose this product? • Ideal for use with waste water pumping systems where waste water is extremely hot i.e. commercial dishwashers, glasswashers etc. • Active carbon filter • Neutralises unpleasant odours • Allows pump units to breathe 24

Weight 0.66kg

Dimensions W �55mm / D �25mm / H�25mm

125