WORK METHODS
RESTRAINT
A personal protection system that prevents the worker from reaching areas at risk of falls from height, keeping them in a safe position by means of devices that limit movement.
POSITIONING AT WORK
This allows the person to work in tension or restraint, keeping them in a stable and safe position, thus preventing falls. The worker is supported by personal protective equipment such as harnesses and ropes that ensure safety and stability during work.
posizionamento
ROPE ACCESS
The worker safely accesses and moves towards the area of work using a work rope and a safety rope, each separately connected to secure anchor points. The system allows safe operation in hard-to-reach areas, such as vertical walls or elevated surfaces, preventing or stopping falls.
posizionamento
FALL ARREST
A protection system that immediately stops a worker, limiting the impact force on their body during the arrest. It consists of devices such as harnesses, ropes and anchors, distributing the impact energy in a controlled manner.
RECOVERY OR RESCUE
The set of procedures necessary to assist and safely recover a worker in an emergency situation, such as a fall or illness, during work at height. These operations allow a person to save themselves or others using specific equipment and applying rapid response protocols.
PATROL + TOWER
HOOK EVO 2.0
HOOK EVO 2.0
VERTICAL NET
PATROL + SHIELD / SHIELD 2
BORDER W
STEP UP
BORDER M
OVERNET
VERTICAL NET
VERTIGRIP ON LADDER
EDGE TEMP 4
EDGE TEMP 4
HOOK EVO / 2.0
ANCHOR POINT
Quick and easy installation using Ø8 HBS screws. The base plate with an increased number of holes allows the anchor to be mounted in different positions, depending on the type of roof tiles.
LOOP
ANCHOR POINT FOR TIMBER AND CONCRETE SUBSTRUCTURE
Under-tile fastening ensures a low visual impact, ideal for installation on roofs in historic centres.
WING
ANCHOR POINT FOR ROPE ACCESS WORK
SLIM
ANCHOR POINT FOR SMALL STRUCTURES
HOOK SPIKE
ANCHOR POINT WITH LADDER HOOK
Optimised design for attaching portable ladders and for facilitating operator access to steeply pitched roofs.
KITE
ANCHOR POINT
Can be installed on small beams, with minimum dimensions of 38 x 68 mm with no limits on maximum width.
AOS
ANCHOR POINT
Thanks to its lightweight and compact size, this anchor can be installed quickly and easily.
Extremely robust and reliable. Designed to support single-operator rope access work and fall-protection systems for up to three operators.
The 360° swivel eyelet allows the operator total freedom of movement. Supplied in a handy kit complete with bolts and washers for installation.
HOOK EVO
HOOK EVO 2.0
PATROL + TOWER
LIFELINE ON SUPPORT FOR TIMBER, CONCRETE AND STEEL ROOFS
The system easily adapts to a wide range of design configurations. Thanks to dedicated supports, it can be easily installed on timber, concrete, steel and trapezoidal metal roofs. Its visual impact is minimal, ensuring seamless integration with the existing architecture.
TOWER
SUPPORT FOR TIMBER, CONCRETE AND STEEL ROOFS
Thanks to its elasto-plastic behaviour, it reduces loads in the event of a fall and is suitable for flat, pitched or elevated roofs, with heights ranging from 300 to 800 mm.
TOWER PEAK
ADAPTOR FOR DOUBLE LAYER RIDGE PIECE FOR TOWER
Accessory that allows for lifeline assembly even on closed roofing, without the need for opening and adapting to any slope.
HOLD-SYSTEM®
TEMPORARY HORIZONTAL ANCHORING DEVICE
Complete system of carabiners and webbing for fastening. Quick and easy tensioning of the system by one operator using Prusik knot system and self-locking device.
TOWER XL
SUPPORT FOR LIFELINE ON CLT, CONCRETE AND HOLLOW CORE CONCRETE ROOFS
Ideal for CLT. The increased bottom plate distributes the actions arising from the anchoring devices over a larger area.
TOWER SLOPE
FASTENING GUIDE FOR TOWER ON RAFTER
Allows the anchor system to be placed in any point on the roof. Due to the range of action from 50 to 100 cm, it can cover the most common distances between beams.
ANCHOR POINT FOR STANDING SEAM METAL ROOFS
Device fixed to the seam by means of a single clamp, without the need to drill holes in the metal sheet, guaranteeing its impermeability and durability.
PATROL + SHIELD
LIFELINE ON SUPPORT FOR TRAPEZOIDAL METAL ROOFS WITH AND WITHOUT INSULATION LAYER
Used on all trapezoidal metal roofs with and without insulation layer with a span between frets of up to 420 mm.
PATROL + T-ROOF
LIFELINE ON SUPPORT FOR PVC/TPO AND BITUMINOUS ROOFS
Universal system for application on the roof surface with installation on various supporting substructures. The various fastening kits enable specific installation for each substructure and for different insulation thicknesses.
PATROL + T-CLAMP
LIFELINE ON SUPPORT FOR CONTINUOUS ROOFS
A versatile system with special clamps allowing installation on various types of metal roofs.
SHIELD 2
SUPPORT FOR TRAPEZOIDAL METAL ROOFS
SHIELD 2 for use as a straight intermediate point. Easy installation because it is configured as a single plate.
GREEN LINE
LIFE LINE ON SUPPORTS WITH BALLAST
System with ballast that does not require the roofing to be penetrated. It avoids thermal bridging and respects the waterproofing of the structure. Reduced visual impact, almost invisible once installed.
HORIZONTAL NET
HORIZONTAL POLYPROPYLENE FALL PROTECTION SAFETY NET
Possibility of joining several nets together using HORCONNECT sewing rope to cover larger areas. Fastener spacing optimised to 2,5 m to ensure product safety and rapid installation.
OVERNET
PERMANENT FALL PROTECTION SYSTEM FOR INDUSTRIAL ROOFING
Supplied in 25-m rolls, it is easily installed outdoors on trapezoidal metal sheet or trapezoidal sandwich panels. Complete system composed of: fall protection net, fastening plates, EPDM gaskets and rivets.
VERTICAL NET
VERTICAL POLYPROPYLENE FALL PROTECTION SAFETY NET
A reliable protection system for safe work at roof edges and on scaffolding.
FRAME NET
FALL PROTECTION SAFETY NET WITH FRAME
Ideal for securing the roof when there is no possibility of installing external scaffolding or perimeter protection with external fastening.
TEMPORARY RAILING BARRIERS
EDGE TEMP 1
TEMPORARY RAILING ROOF SIDE
EDGE TEMP 3
TEMPORARY RAILING FOR HORIZONTAL EDGES
EDGE TEMP 2
TEMPORARY RAILING FRONT COVER
EDGE TEMP 4
TEMPORARY UNIVERSAL RAILING WITH STEM
ALUMINIUM PERMANENT AND TEMPORARY RAILINGS
BORDER W
SELF-SUPPORTING RAILING
BORDER M
RAILING FASTENING ON TRAPEZOIDAL METAL ROOF
LADDER HOOKS
BORDER V/VD BORDER H
RAILING VERTICAL AND VERTICAL SPACED FASTENING
HORIZONTAL FASTENING RAILING
MOBILE LADDER HOOK
BORDER Z HANG TEMP HANG ROOF
LADDER HOOK FOR PITCHED ROOFS
A Z FASTENING RAILING
LADDERS
CAGED LADDERS
PERSONAL PROTECTIVE EQUIPMENT
HERO
Lightweight, with a sporty design, featuring wheel ratchet size adjustment. Ventilation ensures comfort even on the hottest days. Available in various colours and customisable with your logo.
HARNESSES
Semiprofessional and professional harnesses for fall protection, positioning and rope access work. Comfortable and certified, they are indispensable for working at height.
ROPES AND CONNECTORS
Abrasion-resistant work ropes featuring excellent handling, compatible with connectors available in a wide range of shapes, sizes and breaking strengths.
The new FALL PROTECTION SYSTEMS AND PROTECTIVE EQUIPMENT catalogue is the comprehensive guide for working at height in complete safety, in the construction and industrial sectors. Advanced technologies, maximum protection and regulatory compliance – all in the one resource. Download it now!
“Safety Learning”: training courses for fall-protection system installers, available both in person and online.
ROTHOSCHOOL ON TOUR
We bring "Safety" training directly to local areas, with handson sessions for industry professionals.
DISCOVER OUR OFFERING www.rothoblaas.com/rothoschool
BLOG
What we learn from field experience is clear: technique matters, but only if you know how to put it into practice. Here you will find technical articles, practical applications, and case studies.
TECHNICAL ASSISTANCE
Get maximum efficiency and performance from Rothoblaas solutions: a team of highly qualified technical consultants is always at the disposal of designers, technicians and installers.
INSTALLATION VIDEO
Dedicated support for engineers, technicians and installers on the positioning and correct choice of fastening systems.
www.rothoblaas.com
Rotho Blaas Srl
