FIBER LASER (RK-153FL-PRO (TC)) - MANUAL by RADEK - Woodworking & Metalworking Machines

FIBER LASER RK-153FL-PRO (TC)

MANUAL

Global Version Continuous -Wave Laser User Guide 1000- 1500W

Wuhan Raycus Fiber Laser Technologies Co. , Ltd.

Wuhan Raycus Fiber Laser Technologies Co. , Ltd

User Guide of Global Version 1000- 1500W CW laser

TABLE OF CONTENTS

1 Safety Information ..................................................................................................................... 1 1.1 Security Identifier .............................................................................................................. 1 1.2 Laser Safety Grade ............................................................................................................ 1 1.3 Security Identifier ................................................................................................................... 2 1.4 Optical Safety ..................................................................................................................... 3 1.5 Electrical Safety ................................................................................................................. 3 1.6 Other Safety Rules ............................................................................................................. 3 2 Product Description ................................................................................................................... 4 2.1 Features .............................................................................................................................. 4 2.2 Model description .............................................................................................................. 4 2.3 Package accessoriesare ...................................................................................................... 5 2.4 Unpacking and Inspection ................................................................................................. 5 2.5 Operation Environment ..................................................................................................... 6 2.6 Attentions............................................................................................................................ 7 2.7 Specifications ..................................................................................................................... 7 Table 5 Product Specifications ...................................................................................................... 8 3 Installation ................................................................................................................................. 10 3.1 Dimensions ...................................................................................................................... 1 0 3.1.1 Overall dimensions of Global Version 1000-1500W CW laser .................................... 10 3.2 Size and installation of output optical cable ..................................................................... 11 3.2.1 Global Version 1000-1500W CW laser output optical cable ........................................ 1 1 3.3 Cooling system installation and requirements .................................................................. 12 3.4 Installation rule ................................................................................................................ 14 4 Using the Product .................................................................................................................... 1 5 4.1 Front panel ....................................................................................................................... 15 4.2 Rear Panel ........................................................................................................................ 16 4.3 Power Connection ........................................................................................................... 1 7 4.4 Interface definition .......................................................................................................... 18 4.5 Installation Instruction .................................................................................................... 2 4 4.6 Start operation sequence ................................................................................................. 25 4.7 Functions of the clientware ............................................................................................. 25 4.8 Control mode selection ................................................................................................... 3 2 4.9 Shut down the laser: ........................................................................................................ 37 4.10 Bluetooth app operation description ............................................................................ 37 5 Common Alarms and solutions .............................................................................................. 46

Wuhan Raycus Fiber Laser Technologies Co. , Ltd

User Guide of Global Version 1000- 1500W CW laser

5.1 Alarm display ................................................................................................................... 46 5.2 Alarm processing ............................................................................................................. 46 6 Warranty, Return and Maintenance ..................................................................................... 49 6.1 General Warranty ............................................................................................................ 49 6.2 Limitations of Warranty .................................................................................................. 49

6.3 Service and Repair ........................................................................................................... 50

Wuhan Raycus Fiber Laser Technologies Co. , Ltd

User Guide of Global Version 1000- 1500W CW laser

1 Safety Information Thank you for choosing Raycus fiber laser. This User Guide provides important safety, operation, warranty and other information. Please read it carefully before using this product. In order to ensure safe operation and optimal performance of the product, please follow the warnings, cautions, operating procedures and other instructions accordingly.

1. 1 Security Identifier  WARNING: Describes a hazard that lead to a personal injury or death.

 CAUTION: Describes a hazard that lead to a minor personal injury or product damage.

1.2 Laser Safety Grade According to the European Community standards EN 60825 - 1, clause 9, this series of lasers are classified as a high power Class 4. This product emits invisible laser radiation at wavelength of 1080 nm, and the light power is 100 -2000W up to machine. Direct or indirect exposure of high power of laser radiation may cause damage to the eyes or skin. Despite the radiation being invisible, the beam may cause irreversible damage to the retina and cornea. Appropriate and approved laser goggles must be worn all the time during the laser device is operating.  WARNING: Users must use appropriate laser goggles when operating this device. The laser goggles is selected according to the range of wavelength emitted from this product. Users must ensure that the protect range of laser goggles over the entire range of laser wavelengths. Please do not directly view the laser output head when laser emitting.

Raycus User Guide | Safety Information

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000- 1500W CW laser

1.3 Security Identifier Raycus CW Fiber Lasers have different locations of safety identifier depending on the model, as shown in Figure 1:

Figure 1 Laser Security Identifier Laser safety identifier includes: safety warning, laser emit head warning, product certification, ID label, etc. The detailed descriptions of the security identifier are as follows: Table 1 Security Identifier

1: Laser Radiation Hazard

2: Laser Emit Head

4: Class 2M Laser Product Label- 1mW Red Laser

5: CE Authentication

3: Type 4 Laser Product

6: ID Label

7:Electrical Hazard

Raycus User Guide | Product Description

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000- 1500W CW laser

1.4 Optical Safety Any dust on the end of the collimator assembly can burn the lens.  CAUTION: DO NOT emit when the protective cap is not removed, otherwise the lens or crystal will be damaged.

1.5 Electrical Safety 1) Make sure the product is grounded through the PE line of the AC power cord. The grounding must be firm and reliable.  WARNING: Any interruption from the protective earth will electrify the enclosure, which may result in personal injury. 2) Make sure that the correct voltage of the DC power source is used.  CAUTION: Wrong wiring mode or power supply voltage will cause an unrecoverable damage to the laser device. There are no devices that need to be used by operator in the laser. Please do not try to open the laser cover, otherwise it may cause electric shock and the warranty will be invalid accordingly.

1.6 Other Safety Rules 1) Do not directly view the laser output head when laser emitting. Avoid using the laser in a dark environment. 2) Do not use fiber lasers in dark environments. 3) If this device is used in a manner not specified in this document, the protection provided by the device may be impaired and the warranty will be Raycus User Guide | Product Description

Wuhan Raycus Fiber Laser Technologies Co., Ltd

voided.

User Guide of Global Version 1000- 1500W CW laser

4) There are no user serviceable parts, equipment or assemblies inside the product. All service and maintenance shall be performed by Raycus. In order to prevent electric shock, please do not break the seal or uncover the shield. Failure to comply with this instruction will void the warranty.

2 Product Description 2. 1 Features

Raycus fiber laser is designed for industrial and scientific research applications with high pump conversion efficiency, low power consumption and excellent beam quality. It is compact and ready to use. It can be used as a stand-alone unit or easily inserted into user’s apparatus. Main Features: > Excellent beam quality > High reliable and tightness > High power stability > Power continuously adjustable and fast switch response > Maintenance free operation > High Electro-optical Conversion Efficiency > Altitude Stress-resisting Capacity > High modulation frequency and editable waveform Applications: > Welding 、5G 、Infrastructure Scientific research

2 .2 Model description Raycus continuous fiber laser includes 100, 200L, 200, 300L, 300, 500, 750, 1000 and other models, which respectively represent 100W, 170W, 200W, 250W,

Raycus User Guide | Product Description

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000- 1500W CW laser

300W, 500W, 750W, 1000W lasers. The definitions of the model code are shown in the table below: Table 2 definition of model code

RFL-C 500/B/ 15/W 1

RFL-C series continuous fiber laser Power indicator, including 100, 200L, 200, 300L, 300, 500, 750, 1000, 1500, 2 2000 respectively representing 100W, 170W, 200W, 250W, 300W, 500W, 750W, 1000W, 1500W, 2000W power laser 3 Wavelength, ‘B’ represents a wavelength of 1080nm 4 Output cable length, unit meter, including 10 meters and 20 meters, also can be customized length 5 Cooling method, ‘W ’ stands for water cooling, ‘A’ stands for air cooling Notes: RFL-C100 ~ RFL-C3000 laser without air conditioning

2 .3 Package accessoriesare Please refer to package accessoriesare in the packing box.

2 .4 Unpacking and Inspection Raycus fiber laser is delivered in a package, which is designed to offer the maximal safety. Upon the delivery, please inspect all packaging for evidence of mishandling or damage. If you find any evidence of mishandling, please keep the damaged material and contact the shipping agent and Raycus immediately. Please double check if each listed contents is inside the package; and contact Raycus as soon as possible if there is any issue. Take extra care when removing the unit from the package to make the fiber optic cable stay away from collision and vibration. Please do NOT distort, bend or pull the output cable when unpacking the device; and avoid any collision to the head of laser output.

Raycus User Guide | Product Description

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000- 1500W CW laser

 CAUTION: The fiber optic cable and output head are precise optic instrument, ANY vibration or impact to the output head, and twist or excessive bend to the cable will damage the instrument.

2 .5 Operation Environment The operation conditions are listed as the following table: Table 3: The Operation Environment Conditions for the Laser Model Power Source Power Capacity

Installation Environment Ambient Temperature ( ) Relative Humidity

RFL-C1000S-CE/RFL-C1000H-CE、 RFL-C1500S-CE/RFL-C1500H-CE 220±10% V AC 50/60Hz 4.5 Flat and no vibration 10 ~ 40 ＜70

Warning: 1) Make sure the product is properly grounded before use. 2) The laser output head is connected with fiber optic cable. Please inspect the output head carefully for prevent dust or other pollution. Use appropriate lens paper to clean it if necessary. 3) Failure to follow the instructions when operating the laser may cause malfunction and damage. 4) It is not allowed to install the output head when the laser is in operation. 5) Do not look into the output head directly. Wear appropriate protective eye glasses all the time when operating the laser  Do not expose this product to high humidity (humidity> 95%).  Do not allow this product to operate at a temperature below the ambient dew point. (As shown in Table 4)

Raycus User Guide | Product Description

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000- 1500W CW laser

Table 4 Comparison table of constant dew point at ambient temperature and relative humidity Constant dew point table at ambient temperature and relative humidity Maximum relative humidity Ambient temperature 20% 30% 40% 50% 60% 70% 80% 90% 95% ( C) 20

-3.5

14.5

16.5

0.5

10.5

16.5

4.6

10.5

18.5

21.5

8.5

19.5

28.5

27.5

33.5

Laser operating temperature range

2.6 Attentions 1) Make sure that the correct voltage (according to Table 3) is used. Failure to connect power supply will damage the device. 2) Failure to operate the laser in accordance with the control or adjustment methods specified in this manual may cause damage. 3) The output laser is collimated by the collimating lens, it is important to keep the collimating lens clean, otherwise it will damage the device. 4) Please cap the output head when it is not in use. Do not touch the output lens at any time. Using appropriate lens paper to clean it if necessary. 5) Failure to follow the instructions may cause laser power loss, such loss is not covered by warranty.

2.7 Specifications

Raycus User Guide | Product Description

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Table 5 Product Specifications Model

RFL-C1000S-CE

RFL-C1500S-CE

RFL-C1000H-CE

RFL-C1500H-CE

1000

1500

Test Conditions

Optical Characteristics Output Power(W)

1000

1500

Operation Mode Polarization State

CW/Modulated Random

Output Power Tunability(%)

10~100

Emission Wavelength (nm)

1080±5

Nominal Output Power Nominal Output Power

Output Power Unstability (%)

±1.5

Modulation Frequency(Hz)

0~5,000

Red Guide Laser Power(mW)

0.1~1

Duration: ≥5hrs; Ambient Temp.: 22±1℃ Nominal Output Power

Optical Output Characteristics of QBH head Beam Quality(M2)

2~6

<1.8

Beam Parameter Product (BPP)

Half Angle Divergence (rad)

≤0.08

/ BPP <1.5 mm.mrad Nominal Output Power，4 σ Standard ≤0.06 Raycus User Guide | Product Description

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Model

RFL-C1000S-CE

RFL-C1500S-CE

RFL-C1000H-CE

RFL-C1500H-CE

Core Fiber(μm)

25(14、20、100、200 are 50(14、20、100、200 are optional) optional)

50(14 、20 、100 、200 are optional)

Delivery Cable Length(m)

Power Supply Max. Power Consumption(W) Control Mode

Test Conditions

Customizable length

Electrical Characteristics 220±10% V AC 、50/60Hz 4500 RS-232/AD/Ethernet Other Characteristics

Dimensions(W×H ×D) (mm)

440×586× 149 (include handle)

Weight(kg)

<25

Operating Ambient Temperature ( C)

10~40

Humidity(%)

<70

Storage Temperature( C)

- 10~60

Cooling Method

Water Cooling

Raycus User Guide | Product Description

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

3 Installation 3. 1 Dimensions

3.1.1 Overall dimensions of Global Version 1000-1500W CW laser The external dimensions of the Global Version 1000 W CW laser is the same as that of Global Version 1500W CW laser. (As shown in Figure 2, take the Global Version 1500W CW laser as an example.)

Figure 2 (a) Front view (Unit: mm)

Figure 2 (b) Rear view (unit: mm) Raycus User Guide | Installation

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 2 (c) Top view (Unit: mm)

3.2 Size and installation of output optical cable Raycus continuous wave fiber laser uses different laser output cables according to different laser models. 3.2.1 Global Version 1000-1500W CW laser output optical cable The output cables of Raycus Global Version 1000- 1500W CW lasers are self- made QBH output cables. The specific appearance dimensions are shown in Figure 3 below:

Raycus User Guide | Installation

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 3 Dimensional drawing of handheld welding QBH output optical cable (Unit: mm)  For QBH output optical cables, the two copper contacts (Interlock pins) on the output head must be shorted before the laser works, otherwise the laser will not work properly. Usually the copper contacts are automatically shorted after the output fiber cable is installed in the processing equipment.  Before installing the output cable in the processing head, the lens of the output cable must be inspected. If the lens is dirty, it must be cleaned.  It is forbidden to disassemble the output lens by anyone other than Raycus, otherwise the warranty will be invalidated

3.3 Cooling system installation and requirements Table 6 Cooling Requirements Model

RFL-C1000S-CE/RFL-C1000H-CE

RFL-C1500S-CE/RFL-C1500H-CE

Cooling Capability (W)

>4500

Minimum Flow (L/min)

Maximum Pressure (Bar)

External diameter of water-cooling pipe (mm)

Cooling system water temperature ( C)

22 ± 1C Raycus User Guide | Installation

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

1) Temperature setting of cooling water: > 22±1C(It does not have to be changed in summer). 2) Requirements on Cooling Water: Purified water should be used. > In order to prevent the growth of mold that may lead to blockage, adding alcohol solution to about 10% of the total volume is recommended. > If ambient temperature is between - 10C and 0C, we recommend to use 30% alcohol(volume ratio), and replace it every 2 months. > If ambient temperature is below - 10C, the chiller with both heating and cooling functions must be used, and keep it in full-time operation. 3) Other cooling system requirements: > Check the entire water system and joints for leaks, the first time starting the cooling system. The external water pipe must be installed and connected according to the water inlet (IN) and water outlet (OUT) indicated by the laser, otherwise the laser may not work properly. > If the laser is not used for a long time, the cooling system and the cooling water inside the laser should be drained, otherwise it will cause irrecoverable damage to the laser.  Set the water temperature of the cooling system correctly according to the ambient temperature. If the water temperature is set too high, the laser will not work properly. If the water temperature is set too low, condensation will occur inside the laser or the laser output cable, which will cause irrecoverable damage to the laser  Before staring the laser, the cooling system must work properly and the water temperature reaches a suitable temperature.

Raycus User Guide | Installation

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

3 .4 Installation rule 1) Place the product in an appropriate position, immobilize it if necessary. 2) Check if the power supply has the correct voltage (laser model and power voltage refers to product parameters in Table 5), and the earth line is connected, make sure it is firm and reliable 3) Connect the power cable and control cable to the product when power supply is OFF. 4) Connect the cooling system to the laser and output fiber cables according to the water inlet and outlet signs. 5) Please check the laser output head and do the necessary cleaning before installing it in the device. If you find that there is dust or foreign objects that cannot be cleaned, please contact Raycus in time, and do not continue installation and operation for the time being. 6) Prevent the delivery cable from treading, pinching or excessive bending during installation. 7) Please handle the laser output cable carefully, and do not receive vibration during the installation and disassembly. 8) Make sure the environment is clean, or the output head may be contaminated. It is prohibited to use fan during installation, which will cause dust in the air. 9 ) The minimum bending diameter of the transmission cable of the laser shall not be less than 20cm in the non-working state ( such as transport and storage) . The minimum bending diameter should not be less than 30cm when the laser is work.  CAUTION: All the cables can only be connected when power supply is off. Hot plug may damage the device.

Raycus User Guide | Installation

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

 Ensure that there are no fiber bends in radius less than 30cm when the product is installed. Avoid excessive twisting and tight bends during the robotic arm movements.  Tight bends will damage the laser delivery system.  Before the laser output cable is assembled, the lens and the cutting head cavity must be clean and free of pollution.  Keep the protective cap properly, prevent it from contamination; or the aperture will be contaminated when capped.

4 Using the Product

△ The Raycus continuous fiber laser ( with network port) has stopped using the super terminal. After the laser is powered on, there is no display on the super terminal. Please log in to the official website of Raycus to download the new version of the upper computer software and upper computer software instruction manual. Web http://www.raycuslaser.com/index.php/index-show-tid-53.html

4.1 Front panel Figure 4 shows the front panel style of Global Version 1000- 1500W CW laser (take the Global Version 1500W CW laser as an example):

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 4 Global Version 1000- 1500W laser front panel

4.2 Rear Panel

Figure 5 shows the rear panel style of Global Version 1000- 1500W CW

laser:

Figure 5 Global Version 1000- 1500W laser real panel 1. Alarm: Laser fault indicator. 2. Laser: Laser output indicator. 3. Power: Power indicator, indicates that the power is switched on when the LED illumines.

4. Water pipe joint: Quick connector, insert the quick-plug water pipe with an

outer diameter of 12 into the quick –insert connector for cooling the circulating cooling water.

5. ETHERNET: Ethernet interface for communication between laser and upper computer.

6 Interface: Laser external control interface, see [4.4 Interface and Definition] Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

7. RS232: 232 serial interface for communication between laser and host computer.

8. Power: Rocker switch for turning on the laser's main power. 9. 220V INPUT: 220V power line input.

4. 3 Power Connection  Before connecting the AC power supply, please check whether the laser model and the AC power supply provided are consistent with those listed in Table 3 or table 5.

Table 7 Power connection requirements Model Power supply

RFL-C1000S-CE/RFL-C1000H-CE

RFL-C1500S-CE/RFL-C1500H-CE

220±10% V AC 50/60Hz

Power cord

Power cord end

Three strands, marked L, N and PE respectively

Label description

L->Phase line (brown) N ->Neutral (blue) PE->Protective earth wire (yellow green) Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Note

Insert the plug at the end of the power cord into the socket marked "220V INPUT" on the rear panel. Note that the plug has anti-reverse connection function. After plugging it in, lock it with a lock.

4 .4 Interface definition 4.4.1 Control interface Figure 6 shows the DB25 control interface diagram:

Figure 6 DB25 control interface The pin definitions of DB25 are as follows:

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Table 8 Control interface definition PIN

Name

Input and output

Function

Typical

Min

MAX

Electric current

No contact point, external voltage or grounding is not allowed (PINS 1 and 4 need to be short-circuited before the laser output)

Short circuit

0- 10V

0V (0%)

10V (100%)

<10mA

Interlock2-

Interlock1-

Interlock1+

No contact point, external voltage or grounding is not allowed (these two PINS need to be short-circuited before the laser output)

Short circuit

No contact point, external voltage or grounding is not allowed (PINS 1 and 4 need to be short-circuited before the laser output)

Short circuit

External voltage or grounding is not allowed (PINS 8 and 9 need to be short-circuited before the laser output)

Short circuit

External voltage or grounding is not allowed (PINS 10 and 11 need to be short- circuited before the laser output)

Short circuit

Interlock2+

RPA

RPB

PWA

PWB

Analog

Analog input

External setting

Laser Power

Analog output

Optical power signal output

0V (0%)

8V (100%)

>5mA

AGND

Analog ground

12, 13 feet return

MOD+

Digital input

Laser modulation signal

16-24V

16V

24V

<10mA

MOD-

Return

15 feet return

Red Laser

Digital input

Red light control

16-24V

16V

24V

<10mA

Laser EN

Digital input

Laser enable

16-24V

16V

24V

<10mA

analog

quantity

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Name

Input and output

Ready

Digital output

DGND

Typical

Min

MAX

Electric current

Laser ready

24V

>10mA

Digital ground

17/18/19/21/22/23/24 common grounds

EX_RST

Digital input

Laser fault reset

16-24V

16V

24V

<10mA

Laser Error

Digital output

Laser fault output signal

24V

>10mA

POWER

Digital output

High level=Main power supply started

24V

>10mA

LASER

Digital output

High level=Laser is emitting

24V

>10mA

other

N/C

Not allowed to connect

Function

 Please check the level of the control signal to ensure compliance. Exceeding voltage or voltage fluctuations may damage the laser  Please ensure that the analog signal DOES NOT exceed 10V, or product may be damaged.  The Interlock interface is PIN 1 and PIN 4 、PIN 2 and PIN 3 of DB25. If these two pins are disconnected, the laser will immediately interrupt the light, the laser Ready signal output will become low level, and the laser will display an Interlock alarm.  The Interlock interface shall not be connected with active signal, otherwise it will cause interface damage and laser alarm.  Before powering on the laser, please make sure that PINS 8 and 9 、PINS 10 and 11 are short-circuited, otherwise the laser cannot be powered on.

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

4.4.2 RS-232 serial port The following figure shows the RS-232 serial port

Figure 7 RS232 serial port Each pin is defined as follows. Table 9 RS-232 serial port definition PIN Number 2 3 5 others

Definition RX TX GND N/C

A three-core (RxD, TxD, GND) interface is used. For specific commands and descriptions, please refer to the software manual of the host computer or ask a Raycus technician for a communication protocol. The specific parameter settings of the RS-232 control interface are as follows: Table 10 RS-232 interface configuration parameters Parameters Baud rate Data bits Stop bit polarity Flow control

Set up 9,600 8 1 None None

Figure 8 RS-232 serial cable configured for the product:

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 8 RS-232 serial cable 4.4.3 Ethernet TCP / IP interface and connection steps The default IP address of the laser is 192.168.0.10 and the laser only supports UDP communication. The laser listens for connections on port 8099 . The command must be sent as a single string in a single packet. Table 11 Ethernet interface pin definition PIN

Description

Notes

1 2 3 4 5 6 7 8

TX+ TX-

Transmit Data+ Transmit DataReceive Data+ Not Connected Not Connected Receive Data Not Connected Not Connected

RX+ N/C N/C RXN/C N/C

If conditions permit, please use this interface first to get better communication stability. Ethernet connection steps: Default IP address of the laser IP address

192.168.0.10

Subnet Mask

255.255.255.0

IP Configuration: Step 1: Open "Local Area Connection" on your computer and click "Properties"; Step 2: Select "Internet" protocol version 4 (TCP/IP4); Step 3: Click the "Properties" button; Step 4: Select "Use the following IP address:" to manually assign IP addresses; Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000- 1500W CW laser

Step 5: Assign the IP address 192. 168.0.x (x cannot be 10 because 1 92 . 168 .0 . 10 has been assigned to the laser) , and then assign the subnet mask address, which is 255.255.255.0 by default; Step 6: Click "OK" to confirm the setting and exit. See Figure 9 for details.

Figure 9 IP settings on the PC terminal After the IP setting is completed, open the upper computer, and the connection status in the corresponding text box on the upper computer interface shows that it is connected, indicating that the SCM program is running normally and the communication connection is normal. The display interface is shown in Figure 10:

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 10 Main interface of normal communication connection display

4 .5 Installation Instruction 1) Take out the laser carefully, move it to the installation position, fix the laser with screws through the installation holes on the front panel of the machine. 2) Remove the protection cap of the output head, use strong light to check if there is dust on the lens of the output end. If so, please clean it before use, and then cover the protection cap of the output head. 3) Install the output optical cable on the processing equipment according to the actual situation (also install the output head cooling water pipe), pay attention to arrange the output optical cable, and protect the output head. After installing and arranging the output optical cable, remove the protective cap, and check whether the output lens is clean again, and then install the output head; 4) Remove the rubber pipe plug and safety clip at the quick connect joint of the inlet and outlet, connect the laser cooling water pipe, and then install the safety clip back; Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

5) Connect the control line and power supply according to the control mode.

4. 6 Start operation sequence Make sure the air switch is off. All electrical connections must be completed before the laser is powered on. 1) Turn on the chiller and check the water pipe for leaks. If there is no leakage, turn off the chiller and wait for the laser to turn on; 2) Ensure that PIN 1 and PIN 4, PIN 2 and PIN 3 Interlock on DB25 PINS have been short- circuited and closed; Ensure that the remote power-on switch of PIN 8 and PIN 9 have been short-circuited and closed; Ensure that PIN 10 and PIN 11 emergency stop switches have been short-circuited and closed; 3) Close the air switch on the rear panel and wait for the laser to power on and perform a self-test. Note: When the working environment temperature and relative humidity are within the dew point area (blue) in Table 4, for RFL-C100 to C3000 type lasers, please improve the working environment of the laser to avoid damage to the laser due to condensation.

4.7 Functions of the clientware The clientware of the Global Version 1000- 1500W CW laser is communicates with the main control board through UDP when it is working. Through the background program running in the software and the human-computer interaction operation, the laser parameters are read and set and the control functions are realized. The interface displayed by the software is divided according to functional categories, including control, alarm, about, language selection, authorization, working mode selection and other pages.

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 11 The clientware interface 4.7.1 The control interface The control interface is the content displayed on the first page after opening the clientware, including the user's most commonly used status signal, laser parameter setting and laser control related functions. Control abnormal laser reset: Click the reset button to run the abnormal laser reset command. Guide laser: the guide laser is turned on or off in the internal control state of guide laser. After the guide laser is turned on or off, there will be changes in the guide laser state on the software. Guide laser external control: turn on the guide laser external control or turn off the guide laser external control. After turning on and turn off the guide laser external control, there will be changes of the guide laser external control state in the software. If the current red external control state, then disable the red control button. Control laser parameters: Optical output parameters include power, frequency, pulse width, and duty cycle. The communication between the software and the Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

main control board requires only power, frequency, and pulse width. The duty cycle can be calculated from the pulse width and frequency, and the pulse width can also be calculated from the duty cycle and frequency. During the software operation, the frequency and duty cycle will be changed synchronously with the pulse width, and the duty cycle will also be changed synchronously with the frequency and duty cycle. The output power can be an integer in the range of [0, 100]. The frequency can be set to a decimal in the range of [0, 5000]. The duty cycle can be set to a decimal in the range of [0, 100]. Control light emission mode: light emission related modes include AD mode, external enable, external modulation mode, and internal modulation mode. You can individually control the opening and closing of each mode, and display the current status of each mode. After the AD mode is turned on, the optical power is controlled by an external signal, and the power setting function of the software should be set to a disabled state. When the external modulation mode is turned on, the frequency, pulse width and duty cycle are controlled by the external modulation signal, and the function of the software to set the frequency, pulse width and duty cycle should be set to the disabled state. Control the light: control to turn on or off the laser emission or laser enable. Only when the laser has a ready signal, can it be controlled normally, otherwise the buttons for turning on and off the laser are set to the disabled state. When the external control light enable is turned off, and the external modulation mode or internal modulation mode is turned on, the "laser enable" is displayed, otherwise, the "laser emission" is displayed. Status display: Including emergency stop, laser enable, Interlock logic normal, Interlock1 closed, Interlock2 closed, power ramp up and down, program mode, program execution, program execution completed, program execution abnormal and other most commonly used laser states, and machine Internal ambient temperature, internal ambient humidity, dew point, external 0- 10V, light output Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000- 1500W CW laser

frequency, light output duty cycle, light pulse width, laser water flow, output optical cable water flow and other data. These status and data refresh time intervals should not exceed 300ms. Laser usage time

display:

including

today's turn-on

time,

today's

light-emitting time, cumulative turn-on time, and cumulative light-emitting time. 4.7.2 The alarm interface All the alarm information of the current laser is displayed on the alarm interface, and the alarm information is updated in real time.

Figure 12 The alarm interface 4.7.3 About The laser time, model, serial number, master control serial number, key version number and system information are displayed in the interface ，when the about interface is opened, the upper computer software reads them from the master control module once.

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 13 The about interface 4.7.4 Language Selection In the language selection interface, you can set the language used by the software. After selecting the language and clicking OK, you do not need to restart the software, automatically convert the content displayed in the software into a language, save the currently selected language to the configuration file, and display it according to the last set language when starting the software next time.

Figure 14 Language selection interface 4.7.5 Authorization The authorization interface is used to control the limited time lock of the laser, when the authorization interface is opened, the machine code, laser lock time and lock time are loaded once, the laser lock time is Raycus' limited time lock for integrators, and the lock time is for the integrator to end customers. Limited time lock. In the authorization interface, only Raycus' authorization code can be set, and Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

the function of calculating the authorization code is implemented in the server and has nothing to do with the host computer software. The authorization code used by the integrator can be generated in the authorization interface.

Figure 15 Authorization interface 4.7.6 The Mode Selection function Select the operating mode of the software, including monitor mode, control mode, diagnostic mode, and debug mode. Monitor mode: The monitor mode is selected by default when the software is opened. The most commonly used and concerned information is displayed on the software interface to avoid the interference of too much information to the user. The monitor mode can be used without password. Control mode:

The control mode adds the function of the operable control

interface on the basis of the observation mode, and the password is required to enter the control mode. Debug mode: On the basis of diagnostic mode, the parameter setting interface is added. Only Raycus debug engineers can enter the encryption mode. Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Diagnostic mode: When a laser fails to diagnose remote after - sales, or the integrated dealer needs to understand more status information of the laser, you can enter the diagnostic mode. 4.7.7 Main control module The main control module contains all states, alarms and system parameters of the main control module. The status and alarm information are automatically refreshed. Only when the currently selected page is in the main control module, the upper machine software will automatically read and refresh status and alarm information. Reducing the frequency of communication and avoid too many resources to occupy the main control module.

Figure 16 Main control module status information interface 4.7.8 Slave control module Power surveillance contains the alarm of the ACDC module and DCDC module. The monitoring enables the control, the failure level is high, the low level is set, the level is high, low settings, and the CAN communication enables the settings. ( The power supply schemes of different models are different, and the opening level and fault level modes are different. Please refer to the actual model. Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000- 1500W CW laser

The following power supply monitoring module interface is only for display, not for parameter guidance.)

Figure 17 Slave control module status information interface

4 .8 Control mode selection 4.8.1 Control mode wiring diagram

Figure 18 Wiring diagram in RS-232 mode Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Note: The above modes need to be modified by using the Raycus upper computer, turn off the red light external control, enable the external light output and external AD, and only retain the modulation mode.

Figure 19 Wiring diagram in AD mode 4.8.2 Stand-alone mode (internal control mode) (connect 4.6 in sequence) 1) Turn on the air switch and the panel "power" indicator light is on; 2) Wait for 20s, internal main control board circuit initialization is completed; 3) Turn off all the external control modes of the laser (turn off the red light external control, external light output enable, external AD and modulation mode); 4) Set the power of the laser (the laser power is to be set by 0- 10V analog quantity, when the AD mode is on; and to be set by the serial port or Ethernet, when the AD mode is off); 5) Turn on the laser enable;

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

6 ) The serial port or the Ethernet interface sends a shutter opening command to output the laser, and sends a shutter closing command to turn off the laser. Shutdown the laser, please refer to [4.9 Closing operation sequence]. 4.8.3 External control mode (sequentially connected to 4.6) Modulation: When the duty cycle of the laser's internal frequency is set to 100%, the laser works in external modulation mode. The on and off of the laser is controlled by the "modulation" signal provided by the user from the external MOD interface. For the timing diagram, see [4.8.5 Control timing Figure]; Gate mode ：When the duty cycle of the internal frequency of the laser is set to less than 100%, the laser works in internal modulation mode. The laser is turned on and off by the user from the external MOD signal and internal frequency generator. Stop internal pulse generation, see [4.8.5 Control Timing Diagram] for timing diagram; The laser works in external modulation mode by default after power on. 1) Turn on the air switch and the panel "power" indicator light is on; 2) Wait for 20s, internal main control board circuit initialization is completed; 3) Set laser power (laser power is set by 0- 10V analog when AD mode is enabled, laser power is set by serial port or Ethernet when AD mode is off); 4) Send a light enable signal to the laser in one of the following ways ● Interface gives light enabling signal (connect 24V between PIN 18 and PIN 20) Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

● Serial port or Ethernet interface to issue the shutter open command-enable light 5) The On/Off of the laser is controlled by the "modulation" signal provided by the external mod interface; Shutdown the laser, please refer to [4.9 Closing operation sequence]. 4.8.4 AD Mode The laser enters the external AD mode through the upper computer selection. The laser power is controlled by the voltage between pin12- 14 of DB25 control interface (0V-0% power, 10V- 100% power). If the upper computer selects external AD mode off, the laser power is set by serial port or Ethernet, and the Raycus laser will enter external ad mode by default when powered on. 4.8.5 Controlling time-series chart Standalone mode____duty cycle = 100% Continuous sequence diagram power ready

>10s

ALARM > m

on S

ff 1 s 20us <20us

Figure 20 Standalone mode – Continuous sequence diagram

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Standalone mode duty cycle = 50%<100% Pluse sequence diagram power ready

>10s

ALARM Laser on enable

>1ms

Shutter on/off or >1ms lunch command Laser

Figure 21 Standalone mode – Pluse sequence diagram Modulation____ Internal pluse duty c y cle = 100%

power

>10s

ready ALARM Laser on /Open s hutter co mmand/DB25

>1m s

Pin6 、9 pin

MOD Laser

Figure 22 Modulation – sequence diagram Gate mode

Internal pluse duty cycle < 100%

power ready

>10s

ALARM

Laser on /open s hutter co mmand/ DB2 5Pin6,9 pin

>1 ms

MOD Internal duty= 50%

Laser

Figure 23 Gate mode – sequence diagram

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

4.8.6 Red Light Control Turn on the air switch, wait for 20 s, the laser enters the red- light external control mode, and a high level of 5-20V is given before the 17-20 feet. If red light internal control is selected on the host computer, you can use the host computer to click "red light on" to turn on the red light.  Laser and red simultaneously

indicator

light

can

output

4.9 Shut down the laser:

Please turn off the laser in the following sequence: 1) Turn off the laser output enable; 2) Turn off the air switch; 3) Turn off the chiller; 4) If the laser is not equipped with air conditioner, please ignore this step; If it is equipped, please wait for the air conditioner to continue working for 10min; 5) Put on the output head protection cap.

4 . 10 Bluetooth app operation description

4.10.1 Log in After opening the single - mode laser app, there is an account password login page, as shown in Figure 24:

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 24 login interface 4.10.2 Connect After entering the login interface, enter the mobile phone number and password, and then click the login. After the login is successful, enter the APP connection page, as shown in Figure 25:

Figure 25 Verification code login interface

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Open the Bluetooth switch of the single -mode laser app. If there is a Bluetooth device nearby, ensure that the switch of the Bluetooth device is turned on and click the "Search" button on the connection page.

Figure 26 connect Click the "Connection" on the right side of the searched Bluetooth device to enter the connection state, as shown in Figure 27:

Figure 27 connecting

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

4.10.3 Equipment After the connection is successful, enter the laser device- status interface, as shown in Figure 28:

Figure 28 device status The device status page mainly includes the main power supply, equipment, alarm, and light state display, as well as the state of light percentage, light power, laser temperature status, and the state of emergency stop, REM, laser enable, red light display, and laser device, and laser The specific state and some parameter values are displayed. There is also a device-alarm page, as shown in Figure 29:

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 29 Equipment-alarm If the device alarm page is connected to the laser, the laser is not alarm, and the interface will display "No alarm, check the historical records! " , If there is a alarm state, the specific title of the alarm will be displayed. The state display of the laser also has the setting function that supports some parameters. It can be visible in the device-settings interface, as shown in Figure 30:

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 30 Equipment-Settings In the device-lock interface, the laser can be locked or unlocked to the laser through the device authorization code. The specific form of the page is shown in Figure 31:

Figure 31 Equipment-Lock Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

4.10.4 My page Entering my page, you can see function introduction, version update, and about machines, as shown in Figure 32.

Figure 32 page The function introduction interface is a specific introduction to the laser. As shown in Figure 33:

Figure 33 Features The version update interface is the content of the current version of the laser and the content of the upgraded version. As shown in Figure 34: Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 34 New version update Mine - About the machine page shows the relevant information of the laser, such as laser time, laser model, laser serial number, main control serial number, key version number, system information. As shown in Figure 35:

Figure 35 Mine-About the machine In Mine - About machine - System Information page, and laser detailed information. As shown in Figure 36: Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Figure 36 Mine - About Machine - System Information 4.10.5 Software introduction The single -mode laser app is a mobile software that can be connected to the laser through Bluetooth to facilitate the after -sales, maintenance, and commissioning engineers, etc., without portable notebooks, you can use the single -mode laser app installed on Android phones to and the laser. Connect, read the state of the laser or set some parameters, which is conducive to the rapid, effective and convenient solution to some problems in the use of laser use. 4.10.6 Workflow

Raycus User Guide | Using the Product

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

5 Common Alarms and solutions 5. 1 Alarm display Connect the computer and open the PC software (download the PC software and its instruction manual, please log on the Raycus oficial website) , after the laser and client software establish normal communication. All laser alarm states can be displayed on the client software interface, as shown in Figure 38. The laser will give an alarm in the case of abnormal internal temperature, abnormal output power, abnormal power supply, abnormal condensation, etc.

Figure 38 Main interface of upper computer software When the laser is running and any alarm occurs ( except for the abnormal Interlock) , the upper computer software interface will also display the alarm. At the same time, the alarm light (yellow) on the laser panel will be on, and the laser will stop and lock.

5. 2 Alarm processing The instructions and possible solutions of alarms are as follows:

Raycus User Guide | Common Alarms and solutions

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Tab le 12 Error instructions and possible solutions Alarm message Error instructions and possible solutions Instruction: Internal clock abnormal. System Timer Solutions: Alarm When this alarm occurs, please contact Raycus directly. Instruction: This alarm occurs when the light exit button on the front panel of the laser has been pressed before powering on. Solutions: Laser On Button When this alarm occurs, please power off the laser and make Alarm the light enable button pop up, and then power on the laser again to cancel the alarm. If the alarm continues to occur, please contact Raycus. Instruction: Occurs when the laser Interlock is disconnected. Inter Lock Alarm Solutions: Short the Interlock pins. If this error continues to occur, please contact Raycus. Instruction: Internal constant current driver is error. Current Driver Solutions: Alarm Restart the Device. If this error continues to occur, please contact Raycus. Instruction: The laser will get this alarm when it can not detect any laser light signal. Laser out alarm occurs only when the laser is emitting light Laser Out Alarm Solutions: Restart the Device. If this error continues to occur, please contact Raycus. Instruction: The alarm is generated when the emission of the laser cannot reach the set value. Power alarm occurs only when the laser is Laser Power Alarm emitting light. Solutions: Restart the Device. If this error continues to occur, please contact Raycus. ACDC1 Alarm

Instruction: AC/ DC1 Alarm. Laser power supply out of work or sudden power disconnect of the power supply system may cause the alarm. Raycus User Guide | Warranty, Return and Maintenance

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

Solutions: Check whether the input AC voltage is normal. Restart the laser to try when it is normal. If the alarm continues to occur, please contact Raycus.

ACDC2 Alarm

T1/T2 Alarm

Hum Alarm

Instruction: AC/DC2 Alarm. Overcurrent or overvoltage inside the device may cause this error. Solutions: Check whether the input AC voltage is normal. Restart the laser to try when it is normal. If the alarm continues to occur, please contact Raycus Instruction: Laser low / high temperature alarm occurs when the sensor in the laser detects that the internal temperature of the laser is abnormal. A high-temperature / low-temperature error occurs when the temperature at the monitoring point exceeds the set upper / lower limit. Solutions: High temperature alarm. Check whether the water-cooling system is normally working, the water temperature is set correctly, and also the water connection is correct. When the water cooling system works normally and the water temperature drops below 30 °C, restart the laser. If the alarm continues, please contact Raycus. Low temperature alarm. Check whether the actual water temperature of the water is too low. In addition, a low ambient temperature may also cause a low temperature alarm when the laser is cold. Please wait until the water temperature of the water rises above 10 ° C and then restart the device. If the alarm continues, please contact Raycus Instruction: The laser detects that the current temperature of the water-cooled plate is lower than the current dew point temperature of the laser. There is a risk of condensation. Solutions: Stop using the laser immediately. Please improve the working environment so that the ambient temperature is lower than the internal temperature, and then restart the laser ( recommended to configure a separate air-conditioned room for the laser).If the alarm continues, please contact Raycus Raycus User Guide | Warranty, Return and Maintenance

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

In addition to the above, if there are any other questions or errors, please contact Raycus to get help.

6 Warranty, Return and Maintenance 6. 1 General Warranty Raycus warrants that all Raycus fiber laser products are conformed to applicable product specifications under normal use and are free from defects in materials and workmanship. The warranties start on the date of shipment from Raycus for a period of time as set forth in the applicable purchase contracts or product specifications. Raycus has the right to choose to repair or replace any product that proves to be defective in materials and workmanship selectively during the warranty period. Only products with particular defects are under warranty. Raycus reserves the right to issue a credit note for any defective products produced in normal conditions.

6 .2 Limitations of Warranty The warranty does not cover the maintenance or reimbursement of our product of which the problem results from tampering, disassembling, misuse, accident, modification, unsuitable physical or operating environment, improper maintenance, damages due to excessive use or not following the instructions caused by those who are not from Raycus. The customer has the responsibility to understand and follow this instruction to use the device. Any damage caused by fault operating is not warranted. Accessories and fiber connectors are excluded from this warranty. According to the warranty, client should write to us within 31days after the defect is discovered. This warranty does not involve any other party, including specified buyer, end-user or customer and any parts, equipment or other products produced by other companies.

Raycus User Guide | Warranty, Return and Maintenance

Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide of Global Version 1000 - 1500W CW laser

WARNING: It is the customer ’s responsibility to understand and follow operating instructions in this User Guide and specifications prior to operation-failure to do so may void this warranty. Accessories and fiber connectors are not covered by this warranty.

6 .3 Service and Repair >

Do not open the device. There are no user serviceable parts, equipment or assemblies for user in this product. All service and maintenance shall be performed by qualified Raycus personnel.

> Please contact Raycus as soon as possible when problems under warranty about maintenance happened to the product. > The product returned with permission should be placed in a suitable container. > If any damage happened to the product, please notify the carrier in document immediately.

We reserve the right to make changes in design or constructions of any of our products at any time without incurring any obligation to make changes or install the same on units previously purchased. All the items about warranty and service above provided by Raycus are for uses’ reference; formal contents about warranty and service are subject to the contract. © 2023 Wuhan Raycus Fiber Laser technologies Co. Ltd, All Rights Reserved

Raycus User Guide | Warranty, Return and Maintenance

Continuous-Wave Fiber Laser User Guide RFL-C3000S、RFL-C3000H、RFL-C035H

Wuhan Raycus Fiber Laser Technologies Co., Ltd

TABLE OF CONTENTS 1 Safety Information ..................................................................................................................... 4 1.1 Symbols Used in this User Guide ..................................................................................... 4 1.2 Laser Classification ........................................................................................................... 4 1.3 Safety Labels ..................................................................................................................... 5 1.4 Optical Safety ....................................................................................................................6 1.5 Electrical Safety ................................................................................................................ 6 1.6 Other Safety Rules ............................................................................................................ 6 2 Product Description ................................................................................................................... 8 2.1 Features ............................................................................................................................. 8 2.2 Package Contents .............................................................................................................. 8 2.3 Unpacking and Inspection .................................................................................................8 2.4 Operation Environment ..................................................................................................... 9 2.5 Precautions for Use ......................................................................................................... 10 2.6 Specifications .................................................................................................................. 11 3 Installation ................................................................................................................................ 12 3.1 Dimensions ......................................................................................................................12 3.2 Output Head and Installation .......................................................................................... 13 3.3 Cooling Requirements .....................................................................................................13 3.4 Installation Procedure ......................................................................................................16 4 Using the Product ..................................................................................................................... 17 4.1 Front Panel ...................................................................................................................... 17 4.2 Rear Panel ....................................................................................................................... 18 4.3 Power Connection ........................................................................................................... 18 4.4 Interface Definitions ........................................................................................................19 4.5 Steps of Installation .........................................................................................................23 4.6 Steps of Starting .............................................................................................................. 23 4.7 Functions of the clientware ............................................................................................. 23 4.8 Control Modes .................................................................................................................29 4.9 Guide laser control .......................................................................................................... 33 4.10 The Programming Mode (Waveform Editing) ..............................................................34 4.11 Steps of shutting down .................................................................................................. 35 5 Alarms and Solutions ............................................................................................................... 35 5.1 Alarms Display ................................................................................................................35 2

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

5.2 Alarm solutions ............................................................................................................... 36 6 Warranty, Return and Maintenance ......................................................................................38 6.1 General Warranty ............................................................................................................ 38 6.2 Limitations of Warranty .................................................................................................. 38 6.3 Service and Repair .......................................................................................................... 39

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

1 Safety Information Thank you for choosing Raycus fiber laser. This User Guide provides important safety, operation, warranty and other information. Please read it carefully before you use this product. In order to ensure safe operation and optimal performance of the product, please follow the warnings, cautions, operating procedures and other instructions accordingly. 1.1 Symbols Used in this User Guide WARNING: Refers to a potential hazard that may leads to a personal injury or death.

CAUTION:

Refers

potential

hazard

that

may

leads

togeneralpersonal injury or product damage. 1.2 Laser Classification This series of lasers are classified as a high power Class 4 laser instrument according to the European Community standards EN 60825-1, clause 9. This product emits invisible laser radiation at or around a wavelength of 1080 nm, and the total power radiated from the laser is greater than 3000W (depending on model). Direct or indirect exposure of this level of light intensity may cause damage to the eyes or skin. Despite the radiation being invisible, the beam may cause irreversible damage to the retina and/or cornea. Appropriate and approved laser safety eyewear must be worn all the time while the laser is operating. WARNING: You must use appropriate laser safety eyewear when this device is operating. The laser safety eyewear is selected according to the range of wavelengths emitted from this product. The end user must ensure that the laser safety eyewear being used protects against light emitted by the device over its entire range of wavelengths. Please verify that the personal protective equipment (e.g. enclosures, viewing windows or viewports, eyewear, etc.) being utilized is adequate for the output power and wavelength ranges listed on the product.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

1.3 Safety Labels The position of the safety labels on products varies depending on the model of the continuouswave fiber laser, as shown in Figure 1:

Figure 1

Safety Label Locations

These safety labels include warning labels, apertures through which laser radiation is emitted and labels of certification and identification, etc. Specifications of these labels are as follows: Table 1

Specifications of Safety Labels

English label

Chinese label

1.Aperture Label

2.Class 4 Laser Product

Chinese label 3.Class 3R Laser Product Label for Guide Laser

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

4. CE Compliance

7.Electrical Hazard 1.4 Optical Safety

5. Identification Plate

6.Laser Radiation Hazard Label

8.NO Bending(Opitcal Fiber)

Any dust on the end of the collimator assembly can burn the lens and damage the laser. CAUTION: If the output of the device is delivered through a lens with an anti-reflection coating, make sure that the lens is of good quality and clean. 1.5 Electrical Safety a) Make sure your product is grounded through the PE line of the AC power cord. The grounding must be firm and reliable. WARNING: Any interruption from the protective earth will electrify the enclosure, which may result in personal injury. b) Make sure that the correct voltage of the AC power source is used. CAUTION: Failure to connect the correct voltage could damage the product. 1.6 Other Safety Rules a) Never look directly into the laser output port when power is supplied to the laser. b) Avoid using the laser in a dim or darkened environment. c) If this device is used in a manner not specified in this document, the protection provided by the device may be impaired and the warranty will be voided. 6

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

d) There are no operator serviceable parts inside, and all maintenance must be performed in Raycus or by qualified Raycus personnel. Do not try to remove covers, or electrical shock may be caused, and warranty will be void.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

2 Product Description 2.1 Features Compared with traditional lasers, Raycus CW fiber laser has higher efficiency electric-optical conversion, lower power consumption and excellent beam quality. The fiber laser is compact and ready to use. It can be used as a stand-alone unit or easily inserted into user’s apparatus. Main Features: a) Excellent beam quality b) High quality fiber output c) High Power Stability d) Continuously tunable output power, quick switching response e) Slow rise and slow fall, Waveform editing f) Maintenance free operation g) High wall plug efficiency Applications: a) Cutting, Welding b) 3D Printing c) Scientific research 2.2 Package Contents Please refer to the packing list accompanying the shipment to check actual items included. 2.3 Unpacking and Inspection Raycus CW fiber laser is shipped in a package designed to provide maximum protection. Upon delivery, please inspect all packaging for evidence of mishandling or damage. If you find any evidence of mishandling, please save the damaged material and contact the shipping agent and Raycus immediately. Remove all the contents from the packing case. Take extra care when removing the unit out of the packing case to ensure that the fiber optic cable is not twisted, hauled or damaged. A comprehensive packing list is included with the system documentation. Check all items against the list and contact Raycus immediately if there is any missing item or evident damage to the unit. DO NOT attempt to install or operate the laser, if there is any evident or suspected damage to the unit. It is recommended to keep the packing materials, as they will be necessary if you ever need to ship the unit back for service at a later date.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

CAUTION:The fiber optic cable and output head is precise optic instrument, any vibration or impact to the output head, and twist or excessive bend to the cable will damage the instrument. 2.4 Operation Environment The basic operation conditions are listed in the table below: Table 2 Basic Operation Conditions for the Laser Model

RFL-C3000S

Supply Voltage(V)

3P4W,380Vac±15%,50/60Hz(PE included)

Supply Capacity(kW)

>12

Water Cooling Parameter Requirements

Cooling capacity

>7.5kW

Water flow rate

>22L/min

Inlet pressure

<7bar

Inner diameter of water pipe

19mm

Installation Requirements

Install on flat surface, no vibration or impact

Ambient Temperature(℃)

10~40

Relative Humidity(%)

30~70

Storage Temperature(℃)

-10℃~60℃

Storage Humidity(%)

<90%

Cooling Method and Requirements

Water cooling,22℃±1℃

Warning： a) Ensure reliable grounded before using the laser. b) The laser output is connected to the output cable. Please check the laser output carefully to prevent dust or other contamination. Use special paper when cleaning the laser output lens. c) If the laser is used in accordance without the method specified in this manual, the laser may be in abnormal working state and cause damage. d) It is strictly forbidden to install the laser output when the laser is in operation. e) Do not look directly into the laser output. Be sure to wear protective glasses when operating the laser. 9

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

 Do not expose this product to high humidity（＞95%）  Do not let this product work below the ambient dew point temperature.(see Table 3) Table 3

The onstant Dew Point Table

AMBIENT DEW POINT Maximum Relative humidity

Room Temperature(℃)

20%

30%

40%

50%

60%

70%

80%

90%

95%

20 25 30

-3.5 0.5 4.6

2 6 10.5

6 10.5 15

9 14 18.5

12 16.5 21.5

14.5 19 24

16.5 21 26

18 23 28

19 24 29

8.5

19.5

28.5

27.5

33.5

 Green area: The dew point temperature is 22℃that is lower than the laser cooling water temperature, which can be used safely；  Red area: If the dew point temperature is higher than 22℃ and exceeds the laser cooling water temperature by 22℃, there must bedew condensation, and measures must be taken. Measure 1: Connecting clean and dry air from CDA port to reduce relative humidity, works for 10-15 minutes in standby mode; Measure 2: Installing cabinet air conditioner to reduce ambient temperature. 2.5 Precautions for Use a) Before supplying the power to the device, make sure that the correct voltage of the AC power source is used. Failure to connect power source correctly will damage the device. b) Failure to follow the instructions may cause malfunction and damage to the device, such damage is not covered by warranty. c) It is very important to ensure the cleanness of the calibrated laser output head, otherwise it will cause irreparable damage to the laser. d) Please inspect the output head carefully for dust or other contaminations. Use appropriate lens paper to clean it if necessary. Do not touch the output lens at any time; as well as remember to cap the output head when it is not in use, and make sure the cap is clean. e) Failure to follow the specified instructions may result in the loss of laser power, and such loss will not be covered by the warranty. 10

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

2.6 Specifications Table 4 Number

Index

Specifications

Condition Model

Standard value RFL-C3000S

RFL-C3000H

Unit RFL-C035H

Fiber technical index Nominal Output Power Water Temperature 22±1℃ Nominal Output Power Nominal Output Power Nominal Output Power Nominal Output Power Nominal Output Power Nominal Output Power

Operation Mode

Nominal Output Power

Emission Power Range

Emission Wavelength

3dB Bandwidth Range

Long-term power stability

Modulation Frequency

Duty ratio Range

Red Guide Laser Power

Continuous Wave / Modulated 3000

10%-100% 1080±5

4-6

±1.5

1-5000

1%-100%

0.5-1.5

μm

QBH Optical index of output optical cable 10

Fiber Core Diameter

Beam Quality (BPP)

1.7-2.0

1.0-1.38

Fiber Delivery Cable Length

mm× mrad

Other technical indicators 13

Operating Voltage

Nominal Output Power

Three-phase four-wire system 50/60Hz， 380±15%

Way to Control

AD/RS-232/Ethernet

Power Consumption

Water flow requirement

Water Temperature requirement

Nominal Output Power Nominal Output Power Nominal Output Power

Dimension

W×D×H

Weight

20 21

Operating Ambient Temperature Operating Ambient Humidity

VAC

L/min

22±1

℃

485*556*143.7

10~40

℃

30~70

Storage Temperature

-10~60

℃

Storage Humidity

30~90

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

3 Installation 3.1 Dimensions Figure 2 shows dimensions of RFL-C3000S.

Figure 2 Laser Outline Dimension Drawing (unit: mm)

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

3.2 Output Head and Installation The laser output head of RFL-C3000S is the standard iHQB interface. The specific appearance and dimensions are shown in Figure 3 above. Compared with other models, the size of the protective end cap of the fiber delivery cable of this model is lengthened.

Figure 3 Dimensions of the iHQB fiber delivery cable (unit: mm) CAUTIONS:  Inspect the output lens before installing the output head to the processing head. Clean the output lens if necessary.  It is strictly prohibited to disassemble the output head by personnel not approved by Raycus, or the warranty is void. 3.3 Cooling Requirements Table 5 Water Quality Parameters of Cooling System Serial Number 1

Item Content Cooling Water Type

pH Value

Conductivity/TDS

Residual Chlorine Content

Reference Standard Deionized Water /Purified Water 6.0-8.0

Remarks

Substandard water quality will corrode the cooling system

＜60μS/cm or ＜30mg/L None

Will block the cooling ＜1 NTU(None by system visual inspection) a) pH and TDS values cannot reflect the content of insoluble particulates in the cooling 5

Turbidity（Insoluble Particulates）

water, and there shall be no insoluble particulates in the cooling water; b) To prevent mold growth in the cooling water from causing pipeline blockage, it is recommended to add an appropriate amount of industrial alcohol, with the addition amout being 5%-10% of the cooling water volume; 13

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

c) The customer shall test the cooling water quality on-site monthly. If the water quality fails to meet the requirements, the cooling water must be replaced immediately, and the cooling water replacement cycle shall not exceed 3 months. d) When the ambient temperature is below 0℃ in winter, the cooling system is prone to freezing, which may cause damage to the laser. It is recommended to use a suitable antifreeze, when the ambient temperature drops to 5℃ in winter. The concentration of the antifreeze should not be too high, as an excessively high concentration will affect the heat dissipation of the system. The proportion can be referred to Table 6 for preparation and use. e) Antifreeze is corrosive. After the weather turns warm(when the ambient temperature is continuously above 10℃), the cooling system should be cleaned and the cooling water replaced with water mixed with alcohol as soon as possible. f) When the laser is transported or not used for more than one week, the cooling water inside the equipment should be drained completely, and the residual water inside the equipment should be blown clean with compressed air at a pressure of less than 0.7Mpa. Otherwise, irreversible damge will be caused to the water circuit system of the laser. Table 6 Recommended Proportion of Antifreeze Serial Number

Antifreeze Temperature Range(℃)

-36~-45

Proportion （Antifreeze Concentrate：Deionized Water/Purified Water） 6:4

-26~-35

5:5

-16~-25

4:6

-6~-15

3:7

-2~-5

2:8

The connection of the laser cooling water is shown in Figure 4. After inserting the rubber hose into the barbed fitting, use the corresponding specification clamp to tighten it.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Figure 4 Schematic diagram of laser cooling system connection g) Requirements for output cable cooling system: 1) Rate of liquid flow: 1.7-2.0 L/min; 2) Pressure of liquid flow: < 0.6 MPa at the inflow; 3) Type of liquid exchange junction: SMC MS-5H-6: 4) Type of tube: outer diameter6; inner diameter4; 5) Direction of cooling liquid: unidirectional; connect the tube with the water-pipe strictly according to direction shown on the layer of the tube; 6) Type of liquid: de-ionized water, condensed water, pure water; 7) PH value of liquid: 6.0-8.0; 8) Filter is needed for the cooling system, and the size of the solid residual practical should be within 100um; 9) Maximum temperature of liquid: 45℃； 10) Minimum temperature of liquid: greater than the saturated dew-point 5℃; 11) Additive to the liquid: satisfies the requirements of PH value and size of solid residual practical as above; 12) Radius of the bending of the armored pipe: off-work state (i.e. transportation and reservation): minimum radius of bending ≥ 20 cm; in-work state: minimum radius of bending ≥ 30 cm; 13) Long-term vibration < 2 G; Impact action < 10 G. h) Other requirements for chiller: 1） When starting the cooling system for the first time, check the entire water system and the joint for water leakage. The external water pipe must be installed and connected according to the inlet (IN) and outlet (OUT) by the laser. Otherwise, the laser may not work properly. 2） If you will not use the laser for a long time, water must be emptied from the product, and then both the inlet and outlet must be blocked with the nuts we provide. Failure to do so may lead to permanent equipment damage.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

CAUTION: Please set the water temperature in strictly accordance with the requirements above. Too low temperature may lead to condensation on the laser module and the output cable. This can cause serious damage to the equipment. CAUTION: Please clean the water inlet filter in time. If the water inlet filter is blocked, the laser flow alarm or high temperature alarm will be triggered. CAUTION: Make sure that the water temperature reaches the set point and the cooling system is working well before you start the laser. 〖summer：22±1℃；winter： 22±1℃〗 3.4 Installation Procedure a) Place the product inan still and stable position. b) Check if the power supply has the correct voltage (See Table 4 for the laser model and corresponding input voltage), and the earth line is connected, make sure it is firm and reliable. c) Connect the power cable and control cable to the product when power supply is OFF. d) Insert the water pipes into the inlet and outlet. e) Check the output head and clean it if necessary. This procedure must be performed by personnel of Raycus or authorized by Raycus. Make sure the environment is clean, or the output cable may be contaminated. f)

Prevent the delivery cable from treading, pinching or excessive bending during installation.

g) During the installation and disassembly process, please take care to handle the laser output head gently, avoiding any shock. h) In the installation of laser output cable and output head process, please make sure that the surrounding environment is clean, otherwise it may pollute the output head (do not use fans, which actually may bring more dust). i)

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

CAUTION:  The laser output optical cable should be kept as natural as possibleand not be distorted.  The too small bending radius of the output fiber cable will damage the laser. CAUTION:  Make sure the aperture and the cavity of the processing head is clean.  Keep the protective cap properly, prevent it from contamination; Or the aperture will be contaminated when capped. 4 Using the Product

manual.

Please use the correct the latest PC software and the relevant

4.1 Front Panel Figure 6 shows the front panel of RFL-C3000S/RFL-C3000H：

Figure 6

Front Panel of RFL-C3000S/RFL-C3000H

Figure 7 shows the front panel of RFL-C035H：

Figure 7 Front Panel of RFL-C035H a) POWER:Control system power indicator light, when the red light is on, it means that the laser is powered on. b) LASER:The laser is emitting light normally. When the green light is on, it means that the laser is emitting light.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

ALARM:Alarm indication, when the yellow light is on, it means that the machine has an alarm.

4.2 Rear Panel Figure 8 shows the rear panel:

Figure 8

Rear Panel of RFL-C3000S

a) AC INPUT: The socket for supply source input that can only be mated with the plug on the power cord we provided (See Table 4 product technical parameters for laser model and corresponding input voltage). Please use only the enclosed power cord provided by Raycus. b) CTRL-INTERFACE: Control interface, CTRL-INTERFACE interface (DB-25), multi-function multiplex interface, users can set control mode, input analog voltage signal, modulate 24V signal, and it is also an alarm signal output interface. c) RS232：Provide remote control and fault information storage of the laser. d) WATER: Pipe connectors, the inlet and outlet for cooling water to flow in and return. (See Table 5 for the laser model and corresponding water pipe size for cooling system requirements) e) ETHERNET: Ethernet interface. It can provide remote control and storage alarm information for the laser. f)

CDA：Dry air inlet.

4.3 Power Connection CAUTION: Before connecting the product to AC supply source, you must check for sure that the AC supply you will apply is in accordance with the specifications provided in Table 2 or 4.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Table 7

Power Connection Requirements

Model

RFL-C3000S

Supply Source

380±15% V AC 50/60Hz

Power Cord

4 wires,

One End of Power Cord

the diameter of single wire is 2.5mm2, wires labeledL1，L2，L3and PE L1，L2，L3-> Phase Line,

Sign Description

PE-> Protective Earth L1, L2, L3->Phase wire, PE->Protective ground wire (one PE wire in plug is required to be connected to the ground wire of the circuit

Note

breaker, and the other one single Pewire is connected to the equipment ground wire to ensure that the laser is fully grounded)

4.4 Interface Definitions 4.4.1 CTRL-INTERFACE Definitions The CTRL-INTERFACE(DB-25) is for laser control, the designation and definition is below：

Figure 9

Diagram of CTRL-INTERFACE

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Table 8 PIN No.

Name

LineMark

Interlock1A

ITL-1A

Interlock2A

ITL-2A

Interlock2B

ITL-2B

Interlock1B

ITL-1B

Remote Key Switch

9 10 11

RPA

Definitions of 24 pin Ctrl Interface Type

Contact Closure Input

Level

24Vdc

Drive Current

50mA

Typical Respons e Time

Description

<500ms

“EN954-1” or”ISO138491 Cat.3PLd”. Passive contact, not connected to external voltage or grounding.

Contact Closure Input

24Vdc

---

20s

24Vdc

---

START-B

Instantaneous Contact Closure Input

RPB Remote Start Button

START-A

Analog Input to Control Current

1-10V

Analog Input

1-10 Vdc

>3mA

100µs

Analog Output Power Monitor

AOUT

Analog Output

0-8.0 Vdc

10mA

20µs

AGND

Return

---

MOD+

Digital Input

18-24Vdc

6 mA

20µs

ModulationGuided Laser Control Emission Enable

MODREDLASER

Return

---

Digital Input

18-24Vdc

6 mA

120ms

LAS-C

Digital Input

18-24Vdc

6 mA

120ms

READY

Digital output

24VdC

50mA

120ms

System Common

GND2

Return

---

Error RESET

RESET

Digital Input

18-24Vdc

6 mA

120ms

Laser Alarm

S-ERR

Digital output

24Vdc

50mA

120ms

Power started

POWER

Digital output

24Vdc

50mA

120ms

Laser emission

LASER

Digital output

24Vdc

10mA

120ms

14 15 16 17 18

Isolated Analog Com Modulation+

Activates the internal control system power supply in REM mode. Passive contact, not connected to external voltage or grounding. In REM mode, start the laser main power supply.Passive contact, not connected to external voltage or grounding. Analog Input 1-10 VDC= 10 – 100% Setpoint Analog Output 0-8VDC （Refer to factory inspection report for details） Return for signals on pins 12, 13 24 VDC Input Return for signal on pin 15 Positive edge activates emission in REM mode Positive edge activates emission in REM mode High=Laser is ready Return for pin 17/18/19/21/22/23/24 Rising edge reset (the resettable alarm) High=Alarm status High= The main power supply is started High=Laser is emission

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

 Caution: Please check the control voltage level and ensure that the level is in accordance with the requirements. Over voltage and voltage ripple may damage the product. The Service Security Interface is pin 1-4 and pin2-3， of CTRL-INTERFACE.If the pin 23 and pin 1-4 are disconnected, the laser will immediately stop emitting light, and the laser Ready signal output will change to low level. Be sure to short-circuit pin 2-3 and pin 1-4 before using the laser. If it is not short-circuited, the laser will display InterLock alarm after power-on.  Interlock interface must not be connected to active signal, otherwise it will cause interface damage and laser alarm. 4.4.2 TCP/IP Interface Configuration Thedefault IP address of this product is 192.168.0.10, only supporting UDP communication. The laser listens for connection on port is 8098, and the command must be sent in a single data string. Table 9

The pin definitions of Ethernet interface

FUNCTION

DESCRIPTION

TX+

TRANSMIT+

TX-

TRANSMIT-

RX+

RECEIVE+

N/C

NONE

N/C

NONE

RX-

RECEIVE-

N/C

NONE

N/C

NONE

For better communication stability, recommend to use this interface first. Table 10

The default IP address of the laser

The default IP address of the laser IP address

192.168.0.10

Subnet mask

255.255.255.0

Steps of Ethernet connection: a) Open “Local Connection” on your computer, and then click “property”; b) Select "Internet Protocol Version 4 (TCP/IP 4)； c) Click the “Property”; 21

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

d) Check “Use the following IP address:” to manually assign an IP address; e) Manually assign an IP address is 192.168.0. x（x cannot be 10, because 192.168.0.10 has been assigned to the laser）, and assign a subnet mask address. The default is 255.255.255.0; f) Click the "OK" button to confirm the settings and exit. The IP address is different from the default gateway, see Figure 10.

Figure 10 Steps of Ethernet Connection When the IP setting is completed, turn on the host computer, and the connection status in the corresponding text box on the host computer interface displays: connected, indicating that the microcontroller program is running normally and the communication connection is normal. The display interface is shown in Figure 11 below.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Figure 11 The main interface is displayed when the communication connection is normal 4.5 Steps of Installation a) Carefully takeout the laser from the box and move it to the installing position and then lock the casters; b) Remove the output cable protective cap and check the output lens for dust with strong light and clean it if necessary, then cover the output cable protective cap; c) Install the output cable on the processing equipment according to the actual situation (install the output head cooling water pipe at the same time), pay attention to the output cable and head,then remove the protective cap andconfirm that the output lens is clean and install the output head； d) Connect cooling water pipe; e) Connect the control line and power according to the control mode. 4.6 Steps of Starting It is determined that the air switch is disconnected, and all electrical connections must be completed before the laser is powered on; a) Make sure that the pins the 24-pin are closed; b) Turn on the chiller and check leakage. If there is no water leakage, turn off the chiller and wait for the laser to turn on; c) Turn on the air switch ; 4.7 Functions of the clientware The RFL-C3000S clientware communicates with the main control board through UDP when it is working. Through the background program running in the software and the human-computer interaction operation, the laser parameters are read and set and the control functions are realized. 23

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

The interface displayed by the software is divided according to functional categories, including control, alarm, about, language selection, authorization, working mode selection and other pages.

Figure 12 Theclientware interface 4.7.1 The control interface The control interface is the content displayed on the first page after opening the clientware, including the user's most commonly used status signal, laser parameter setting and laser control related functions. Control abnormal laser reset: Click the reset button to run the abnormal laser reset command. Guide laser: the guide laser is turned on or off in the internal control state of guide laser. After the guide laser is turned on or off, there will be changes in the guide laser state on the software. Guide laser external control: turn on the guide laser external control or turn off the guide laser external control. After turning on and turn off the guide laser external control, there will be changes of the guide laser external control state in the software.If the current red external control state, then disable the red control button. Control laser parameters: Optical output parameters include power, frequency, pulse width, and duty cycle.The communication between the software and the main control board requires only power, frequency, and pulsewidth.The duty cycle can be calculated from the pulse width and frequency, and the pulse width can also be calculated from the duty cycle and frequency.During the software operation, the frequency and duty cycle will be changed synchronously with the pulse width, and the duty cycle will also be changed synchronously with the frequency and duty cycle.The output power can be an integer in the range of [0,100]. The frequency can be set to a decimal in the range of[0,20000]. The duty cycle can be set to a decimal in the range of [0,100]. 24

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Control light emission mode: light emission related modes include AD mode, external enable, external modulation mode, and internal modulation mode. You can individually control the opening and closing of each mode, and display the current status of each mode. After the AD mode is turned on, the optical power is controlled by an external signal, and the power setting function of the software should be set to a disabled state. When the external modulation mode is turned on, the frequency, pulse width and duty cycle are controlled by the external modulation signal, and the function of the software to set the frequency, pulse width and duty cycle should be set to the disabled state. Control the light: control to turn on or off the laser emission or laser enable. Only when the laser has a ready signal, can it be controlled normally, otherwise the buttons for turning on and off the laser are set to the disabled state. When the external control light enable is turned off, and the external modulation mode or internal modulation mode is turned on, the "laser enable" is displayed, otherwise, the "laser emission" is displayed. Status display: Including emergency stop, laser enable, Interlock logic normal, Interlock1 closed, Interlock2 closed, power ramp up and down, program mode, program execution, program execution completed, program execution abnormal and other most commonly used laser states, and machine Internal ambient temperature, internal ambient humidity, dew point, external 0-10V, light output frequency, light output duty cycle, light pulse width, laser water flow, output optical cable water flow and other data. These status and data refresh time intervals should not exceed 300ms. Laser usage time display: including today's turn-on time, today's light-emitting time, cumulative turn-on time, and cumulative light-emitting time. 4.7.2 The alarm interface All the alarm information of the current laser is displayed on the alarm interface, and the alarm information is updated in real time.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Figure 13 The alarm interface 4.7.3 About The laser time, model, serial number, master control serial number, key version number and system information are displayed in the interface，when the about interface is opened, the upper computer software reads them from the master control module once.

Figure 14 The about interface 4.7.4 Language Selection In the language selection interface, you can set the language used by the software. After selecting the language and clicking OK, you do not need to restart the software, automatically convert the content displayed in the software into a language, save the currently selected language to the configuration file, and display it according to the last set language when starting the software next time. 26

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Figure 15 Language selection interface 4.7.5 Authorization The authorization interface is used to control the limited time lock of the laser, when the authorization interface is opened, the machine code, laser lock time and lock time are loaded once, the laser lock time is Raycus's limited time lock for integrators, and the lock time is for the integrator to end customers. Limited time lock. In the authorization interface, only Raycus’ authorization code can be set, and the function of calculating the authorization code is implemented in the server and has nothing to do with the host computer software. The authorization code used by the integrator can be generated in the authorization interface.

Figure 16 Authorization interface 4.7.6 The Mode Selection function Select the operating mode of the software, including monitor mode, control mode, diagnostic mode, and debug mode. Monitor mode: The monitor mode is selected by default when the software is opened. The most commonly used and concerned information is displayed on the software interface to avoid the interference of too much information to the user. The monitor mode can be used without password. 27

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Control mode:

The control mode adds the function of the operable control interface on the

basis of the observation mode, and the password is required to enter the control mode. Debug mode: On the basis of diagnostic mode, the parameter setting interface is added. Only Raycus debug engineers can enter the encryption mode. Diagnostic mode:When a laser fails to diagnose remote after -sales, or the integrated dealer needs to understand more status information of the laser, you can enter the diagnostic mode. 4.7.7 Main control module The main control module contains all states, alarms and system parameters of the main control module. The status and alarm information are automatically refreshed. Only when the currently selected page is in the main control module, the upper machine software will automatically read and refresh status and alarm information information information. , Reduce the frequency of communication and avoid too many resources to occupy the main control module.

Figure 17 Main control module status information interface

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Figure 18 Alarm information interface of main control module 4.7.8 Slave control module Power surveillance contains the alarm of the ACDC module and DCDC module. The monitoring enables the control, the failure level is high, the low level is set, the level is high, low settings, and the CAN communication enables the settings.

Figure 19 Slave control module status information interface 4.8

Control Modes The laser selects AD mode, external control, internal modulation mode and external

modulation mode through the upper machine interface. 4.8.1 Control mode wiring diagram 4.8.1.1 Internal control mode 29

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Figure20 Internal control wiring diagram mode Operation method: a) Short connection of 8, 9 pin on the 24 -pin of 24 stitches (power on the control board); b) Open the air, the panel "POWER" indicator lights; c) Open the upper machine software and close all the external mode (turn off the red light external control, external envelopes, external AD and external modulation); d) Click the red light button to view the red light; e) Set out the light parameter; f)

Click “laser ON”.

4.8.1.2 Internal/external modulation modes for power and communication

Figure 21 Wiring diagram of internal power control and external signal control Operation method: a) Shortconnect the 8 and 9 pins on the INTERFACE 24 pins (the control board is powered on); b) Open the laser clientware; 30

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

c) Click “the guide laser ON” button to view the guide laser; d) Disabling the AD mode and the external envelopes。 e) Waiting “Ready”; f)

Setting laser power parameters;

g) When the duty cycle of the internal output frequency of the laser is set, set the output frequency/duty cycle/pulse width; (the output light is determined by the modulation signal of pin 15.16 and the output frequency and duty cycle set by the upper computer software); the internal output frequency of the laser is not required When the duty cycle is used, the default setting parameters are that the frequency is 100Hz and the duty cycle is 100%. h) Modulation signal (15, and 16-pin) provide a high level to turn on the laser. 4.8.1.3 Power communication setting parameters in the external control mode, external modulation, external envelopes

Figure 22 In the external control mode, the power internal control, out -of -light external control, and the external enable wiring chart Operation method: a) Shortconnect the 8 and 9 pins on the INTERFACE 24 pins (the control board is powered on); b) Open the laser clientware; c) Click “the guide laser ON” button to view the guide laser; d) Turn off

the AD mode, and opening external enable mode、 external modulation

mode; e) Waiting “Ready”; f)

Interface 24 stitches on 18 pins input rising edges; 31

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

g) Setting laser power parameters; h) When the internal output frequency occupation ratio of the laser is required, set out the light frequency/duty cycle/pulse width; (out of the output of the light and the output of the output of the 15.16 -pin and the output ratio of the upper machine software); no internal output inside the laser is required When the frequency occupation ratio, the default setting parameter is 100Hz and the duty cycle is 100%. i)

15, 16 -foot adjustment signal output high level to turn on laser.

4.8.1.4 In the external control mode, the power simulation amount is set in external settings, external modulation mode, internal control enable enable

Figure 23 In the external control mode, the power and light are all external control wiring diagrams Operation method: a) Shortconnect the 8 and 9 pins on the INTERFACE 24 pins (the control board is powered on); b) Open the laser clientware; c) Click “the guide laser ON” button to view the guide laser; d) Open the AD mode、external modulation mode, turn off the external enable. e) Waiting “Ready”; f)

When the internal output frequency occupation ratio of the laser, set out the light frequency/duty cycle/pulse width; (out of the output of the light and the output ratio of the upper machine software set by the 15.16 -footed signal and the upper machine software); the internal output frequency of the laser is required for At the time of occupation ratio, the default setting parameter is 100Hz, and the duty cycle is 100%;

g) Control board card output analog (12, 14 pin) and outlet signals (15, 16 pin). 32

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

4.8.1.5 In the external control mode, the power simulation amount is set in external settings, external modulation mode, external enable

Figure24 In the external control mode, the power, light, and enable all control wiring diagrams Operation method: a) Shortconnect the 8 and 9 pins on the INTERFACE 24 pins (the control board is powered on); b) Open the laser clientware; c) Click “the guide laser ON” button to view the guide laser; d) Open the AD mode,

the external enable, the external modulation mode;

e) On Click on the main power ON; f)

Waiting “Ready”;

g) Interface 24 stitches on 18 pin input rising edges; h) When the internal output frequency occupation ratio of the laser is required, set out the light frequency/duty cycle/pulse width; (out of the output of the light and the output of the output of the 15.16 -pin and the output ratio of the upper machine software); no internal output inside the laser is required When the frequency occupation ratio, the default setting parameter is 100Hz and the duty cycle is 100%. i)

Control board card output analog (12, 14 pin) and outlet signals (15, 16 pin).

4.8.1.6 Modification mode and Gate mode Modification mode: When the duty cycle of the internal frequency of the laser is set to 100%, the laser works in the external modulation mode. Gate mode: When the duty occupation ratio of the internal frequency of the laser is less than 100%, the laser works in the internal modulation mode. Stop the internal pulse occurring; 4.9 Guide laser control 33

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Table11

Guide laser control

Guide lasercontrol 17 pin of INTERFACE ON

Rising edge -- turns on guide laser; Fallingedge -- turns on guide laser. The clientware：

OFF

Red ON -- turns ON guide laser; Red OFF -- Turns OFF guide laser.

4.10 The Programming Mode (Waveform Editing)

Figure25 Single -machine mode -continuous control time sequence diagram

Figure26 Single -machine mode -pulse control time sequence diagram

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Figure27 Modify mode control time preface diagram

Figure28 Gate mode control time sequential chart 4.11 Steps of shutting down Please turn off the laser in the order below: a) Turn off the emission; b) Discinnect pin 8&9 to Turn off the power suply of control system; c) Disconnect the air switch; d) Turn off the cold water machine; e) Cover the output head protection cap; 5 Alarms and Solutions 5.1 Alarms Display Connect the computer and open the host computer software, after the laser and the client software establish normal communication. All alarm states of the laser can be displayed on the host computer software interface, as shown in Figure 28. When the internal temperature of the laser is abnormal, the power is abnormal, the scattered light is abnormal, the power supply is abnormal, the condensation is abnormal, the flow rate is abnormal, etc., the laser will alarm.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Figure29 The homepage of the clientware If any alarm occurs (except for Interlock alarm)when the laser is running, the clientware will display the alarm that occurs, and the ALARM light (yellow) on the front panel of the laser will light up, the laser will stop emitting and lock. When the Interlock is abnormal, the output of Ready signal is low, and the Interlock state is abnormal in the clientware, but the laser is not locked, and the ALARM light (yellow) is not lit. The output of Ready signal is on high level when the Interlock is normal. 5.2 Alarm solutions The instructions and solutions of alarms are as follows:

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Table 12

Instructions and solutions for alarms of laser

Alarm name

Alarm instructions and solutions Instruction: Low temperature/high temperature alarm of the laser. The sensor in the laser detects an abnormal temperature inside the laser. A high-temperature / lowtemperature error occurs when the temperature at the monitoring point exceeds the set upper / lower limit. Solution:

T1/T2 Alarm

High temperature alarm,please check if the water-cooling system is normally working, the water temperature is set correctly, and the water connection is correct. When the water cooling system works normally and the water temperature drops below 30°C, restart the laser. Low temperature alarm, please check if the actual water temperature of the water is too low. In addition, a low ambient temperature may also cause a low temperature alarm when the laser is cold. Please wait until the water temperature of the water rises above 10°C. Instruction: Scattering light alarm, when the intensity of ambient light inside the laser exceeds the set value, the scattering light alarm will be generated, and the laser

Scattered Light Alarm

emission function will be locked (cannot be unlocked).The scattered light alarm only occurs when the laser emission. Solution: Please restart the laser, check the guide laser state of the laser, and through the clientware "from the control module" reading the scattered light monitoring voltage value, and contact Raycus. Instruction: The alarm is generated when the emission of the laser cannot reach the set value.

Laser Power Alarm Power error occurs only when the laser is emitting. Solution: Please restart the laser, check the red light state of the laser, and contact Raycus. Instruction: ACDC Alarm

ACDC Error, failure of the laser power supply or sudden power failure of the power supply system may cause an alarm. Solution: 37

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

Check if the input AC voltage is normal. Restart the laser, if this error continues to occur, please contact Raycus. Instruction: Current Driver Alarm

Current Driver Alarm,thiserror occurs when the constant current driver board inside the laser is abnormal. Solution: Restart the laser, If this error continues to occur, please contact Raycus

In addition to the above, if there are any questions or errors inusing of the laser, you can contact Raycus to get help. 6 Warranty, Return and Maintenance 6.1 General Warranty Raycus warrants that all Raycus fiber laser products are conformed to applicable product specifications under normal use and are free from defects in materials and workmanship. The warranties start on the date of shipment from Raycus for a period of time as set forth in the applicable purchase contracts or product specifications. Raycus has the right to choose to repair or replace any product that proves to be defective in materials and workmanship selectively during the warranty period. Only products with particular defects are under warranty. Raycus reserves the right to issue a credit note for any defective products produced in normal conditions. 6.2 Limitations of Warranty The warranty does not cover the maintenance or reimbursement of our product of which the problem results from tampering, disassembling, misuse, accident, modification, unsuitable physical or operating environment, improper maintenance, damages caused by those who are not from Raycus due to excessive use or not following the instructions. Customer has the responsibility to understand and follow this instruction to use the device. Any damage caused by fault operating is not warranted. Accessories and fiber connectors are excluded from this warranty. According to the warranty, client should write to us within 31 days after the defect is discovered. This warranty does not involve any other party, including specified buyer, end-user or customer and any parts, equipment or other products produced by other companies.  It is the customer’s responsibility to understand and follow operating instructions in this UserGuide and specifications prior to operationfailure to do so may void this warranty. Accessories and fiber connectors are not covered by this warranty.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C3000S Series

6.3 Service and Repair a) Do not open the device. There are no user serviceable parts, equipment or assemblies for user in this product. All service and maintenance shall be performed by qualified Raycus personnel. b) Please contact Raycus as soon as possible when problems under warranty about maintenance happened to the product. c) The product returned with permission should be placed in a suitable container. d) If any damage happened to the product, please notify the carrier in document immediately. We reserve the right to make changes in design or constructions of any of our products at anytime without incurring any obligation to make changes or install the same on unitspreviouslypurchased. All the items about warranty and service above provided by Raycus are for user’s reference; formal contents about warranty and service are subject to the contract. © 2026 Wuhan Raycus Fiber Laser technologies Co. Ltd, All Rights Reserved.

Continuous-Wave Fiber Laser User Guide RFL-C6000S-CE

Wuhan Raycus Fiber Laser Technologies Co., Ltd

TABLE OF CONTENTS 1 Safety Information ..................................................................................................................... 4 1.1 Symbols Used in this User Guide ..................................................................................... 4 1.2 Laser Classification ........................................................................................................... 4 1.3 Safety Labels ..................................................................................................................... 5 1.4 Optical Safety .................................................................................................................... 6 1.5 Electrical Safety ................................................................................................................ 6 1.6 Other Safety Rules ............................................................................................................ 7 2 Product Description ................................................................................................................... 8 2.1 Features ............................................................................................................................. 8 2.2 Package Contents .............................................................................................................. 8 2.3 Unpacking and Inspection ................................................................................................. 8 2.4 Operation Environment ..................................................................................................... 9 2.5 Precautions for Use ......................................................................................................... 11 2.6 Specifications .................................................................................................................. 11 3 Installation ................................................................................................................................ 14 3.1 Dimensions ......................................................................................................................14 3.2 Output Head and Installation ...........................................................................................15 3.3 Cooling Requirements .....................................................................................................15 3.4 Installation Procedure ......................................................................................................18 4 Using the Product ..................................................................................................................... 20 4.1 Front Panel ...................................................................................................................... 20 4.2 Rear Panel ....................................................................................................................... 20 4.3 Power Connection ........................................................................................................... 21 4.4 Interface Definitions ........................................................................................................22 4.5 Steps of Installation ......................................................................................................... 26 4.6 Steps of Starting .............................................................................................................. 27 4.7 Functions of the clientware ............................................................................................. 27 4.8 Control Modes .................................................................................................................34 4.9 Guide laser control .......................................................................................................... 40 4.10 The Programming Mode (Waveform Editing) ..............................................................41 4.11 Modulation signal requirements ....................................................................................42 4.12 Steps of shutting down .................................................................................................. 43 4.13 Bluetooth app operation description ..............................................................................43 5 Alarms and Solutions ............................................................................................................... 51 5.1 Alarms Display ................................................................................................................51 5.2 Alarm solutions ............................................................................................................... 52 6 Warranty, Return and Maintenance ...................................................................................... 54 6.1 General Warranty ............................................................................................................ 54 6.2 Limitations of Warranty .................................................................................................. 54 6.3 Service and Repair ...........................................................................................................55

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Safety Information Thank you for choosing Raycus fiber laser. This User Guide provides important safety,

operation, warranty and other information. Please read it carefully before you use this product. In order to ensure safe operation and optimal performance of the product, please follow the warnings, cautions, operating procedures and other instructions accordingly. 1.1

Symbols Used in this User Guide

WARNING: Refers to a potential hazard that may leads to a personal injury or death.

CAUTION: Refers to potential a hazard that may leads to general personal injury or product damage.

1.2

Laser Classification This series of lasers are classified as a high power Class 4 laser instrument according to the

European Community standards EN 60825-1, clause 9. This product emits invisible laser radiation at or around a wavelength of 1080 nm, and the total power radiated from the laser is greater than 12000W (depending on model). Direct or indirect exposure of this level of light intensity may cause damage to the eyes or skin. Despite the radiation being invisible, the beam may cause irreversible damage to the retina and/or cornea. Appropriate and approved laser safety eyewear must be worn all the time while the laser is operating. WARNING: You must use appropriate laser safety eyewear when this device is operating. Thelaser safety eyewear is selected according to the range of wavelengths emitted from this product. The end user must ensure that the laser safety eyewear being used protects against light emitted by the device over its entire range of wavelengths. Please verify that the personal protective equipment (e.g. enclosures, viewing windows or viewports, eyewear, etc.) being utilized is adequate for the output power and wavelength ranges listed on the product. 4

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

1.3 Safety Labels The position of the safety labels on products varies depending on the model of the continuous-wave fiber laser, as shown in Figure 1:

Figure 1: Safety Label Locations of RFL-C6000S-CE These safety labels include warning labels, apertures through which laser radiation is emitted and labels of certification and identification, etc. Specifications of these labels are as follows: Table 1: Specifications of Safety Labels

English label

English label(Take 500W for example)

English label

Chinese label

English label (Take 500W for example)

Chinese label

1.Aperture Label

2.Class 4 Laser Product

3.Class 2M Laser Product 5

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Label for Guide Laser

4. CE Compliance

5. Identification Plate

6.Laser Radiation Hazard Label

7.Electrical Hazard 1.4

Optical Safety Any dust on the end of the collimator assembly can burn the lens and damage the laser. CAUTION: If the output of the device is delivered through a lens with an anti-reflection coating,make sure that the lens is of good quality and clean.

1.5

Electrical Safety a) Make sure your product is grounded through the PE line of the AC power cord. The grounding must be firm and reliable. WARNING:Any interruption from the protective earth will electrify the enclosure, which may result in personal injury. b) Make sure that the correct voltage of the AC power source is used.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

CAUTION: Failure to connect the correct voltage could damage the product.

1.6

Other Safety Rules a) Never look directly into the laser output port when power is supplied to the laser. b) Avoid using the laser in a dim or darkened environment. c) If this device is used in a manner not specified in this document, the protection provided by the device may be impaired and the warranty will be voided. d) There are no operator serviceable parts inside, and all maintenance must be performed in Raycus or by qualified Raycuspersonnel. Do not try to remove covers, or electrical shock may be caused, and warranty will be void.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

2 2.1

Product Description Features Compared with traditional lasers,Raycus CW fiber laser has higher efficiency

electric-optical conversion, lower power consumption and excellent beam quality. The fiber laser is compact and ready to use. It can be used as a stand-alone unit or easily inserted into user’s apparatus. Main Features: a) Excellent beam quality b) High quality fiber output c) High Power Stability d) Continuously tunable output power, quick switching response e) Slow rise and slow fall, Waveform editing f) Maintenance free operation g) High wall plugefficiency Applications: a) Cutting, Welding b) 3D Printing c) Scientific research 2.2

Package Contents Please refer to the packing list accompanying the shipment to check actual items included.

2.3

Unpacking and Inspection Raycus CW fiber laser is shipped in a package designed to provide maximumprotection.

Upon delivery, please inspect all packaging for evidence of mishandling or damage. If you find any evidence of mishandling, please save the damaged material and contact the shipping agent and Raycus immediately. 8

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Remove all the contents from the packing case. Take extra care when removing the unit out of the packing case to ensure that the fiber optic cable is not twisted, hauled or damaged. A comprehensive packing list is included with the system documentation. Check all items against the list and contact Raycus immediately if there is any missing item or evident damage to the unit. DO NOT attempt to install or operate the laser, if there is any evident or suspected damage to the unit. It is recommended to keep the packing materials, as they will be necessary if you ever need to ship the unit back for service at a later date. CAUTION:The fiber optic cable and output head is precise optic instrument, any vibration or impact to the output head, and twist or excessive bend to the cable will damage the instrument.

2.4

Operation Environment

The basic operation conditions are listed in the table below: Table 2 Basic Operation Conditions for the Laser Model

RFL-C6000S-CE

Supply Voltage(V)

380±15%Vac，50/60Hz

Supply Capacity(kW)

>20

Installation Requirements

Install on flat surface, no vibration or impact

Ambient Temperature(℃)

10~40

Relative Humidity(%)

30~70

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

d) It is strictly forbidden to install the laser output when the laser is in operation. e) Do not look directly into the laser output. Be sure to wear protective glasses when operating the laser.  Do not expose this product to high humidity（＞95%）  Do not let this product work below the ambient dew pointtemperature.(see Table 3) Table 3 TheConstant Dew Point Table AMBIENT DEW POINT Maximum Relative humidity

Room Temperature(℃)

20%

30%

40%

50%

60%

70%

80%

90%

95%

-3.5

14.5

16.5

0.5

10.5

16.5

4.6

10.5

18.5

21.5

8.5

19.5

28.5

27.5

33.5

Laser operating temperature range

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

2.5

Precautions for Use a) Before supplying the power to the device, make sure that the correct voltage of the AC power source is used. Failure to connect power source correctly will damage the device. b) Failure to follow the instructions may cause malfunction and damage to the device, such damage is not covered by warranty. c) It is very important to ensure the cleanness of the calibrated laser output head, other wise it will cause irreparable damage to the laser. d) Please inspect the output head carefully for dust or other contaminations. Use appropriate lens paper to clean it if necessary. Do not touch the output lens at any time; as well as remember to cap the output head when it is not in use, and make sure the cap is clean. e) Failure to follow the specified instructions may result in the loss of laser power, and such loss will not be covered by the warranty.

2.6

Specifications Table 4 Specifications

Number

Index

Condition

Minimum value

Standard value

Maximum value

Unit

Fiber technical index 1

Operation Mode

Nominal Output Power

Water Temperature 22±1℃

6000

Emission Power Range

Nominal Output Power

Emission Wavelength

Nominal Output

1075

Continuous Wave / Modulated

6100

1080

6200

100

1085

nm 11

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Power 5

3dB Spectral width

Nominal Output Power

Long-term power stability

Nominal Output Power

Modulation Frequency

Nominal Output Power

8 9

±1.5

20k

Duty ratio Range

Nominal Output Power

100

Red Guide Laser Power

QBH Optical index of output optical cable 10

Fiber Core Diameter

μm

Beam Quality (BPP)

75μm Fiber Core

Fiber NA

75μm Fiber Core

0.2

Fiber Delivery Cable Length

75μm Fiber Core

2.7

3.1

mm×mrad /

VAC

Other technical indicators 14

Operating Voltage

Nominal Output Power

Three-phase four-wire system 50/60Hz，380±15%

Way to Control

AD/RS-232/Ethernet

Power Consumption

Nominal Output Power

Water flow requirement

Nominal Output Power

Water Temperature requirement

Nominal Output Power

Dimension

W×D×H

L/min

22 455×802×168

℃ mm 12

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Weight

Operating Ambient Temperature

10~40

℃

Operating Ambient Humidity

30~90

Storage Temperature

-10~60

℃

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Installation

3.1

Dimensions Figure 2 shows dimensions of RFL-C6000S-CE.

Figure 2a) Frontand Rear panel view(unit: mm)

Figure 2b) Top and Side view(unit: mm)

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

3.2

Output Head and Installation The laser output head of RFL-C6000S-CE is the standard QBH interface. The specific

appearance and dimensions are shown in Figure 3 above. Compared with other models, the size of the protective end cap of the fiber delivery cable of this model is lengthened.

Figure 3 Dimensions of the QBH fiber delivery cable (unit:mm) CAUTIONS:  Inspect the output lens before installing the output head to the processing head. Clean the output lens if necessary.  It is strictly prohibited to disassemble the output head by personnel not approved by Raycus, or the warranty is void. 3.3

Cooling Requirements Table 5 Cooling Requirements Model

RFL-C6000S-CE

Cooling Capability(W)

>15000

Minimum Flow(L/min)

Maximum Pressure(Bar)

Pipe Inner Diameter(mm)

Water temperature of cooling system(℃)

22±1℃

a) The water temperature setting of cooling system: 22±1℃ b) Cooling system filter access requirements:

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

When the water quality of the laser cooling system is poor (more impurities), the laser water path is easy to be blocked, causing flow alarm or high temperature alarm, resulting in laser shutdown. In serious cases, the laser waterway will be scrapped. Therefore, RFL-C6000S-CE laser is equipped with water inlet filter module, as shown in Figure 4.

Figure 4 The inlet filter module When the laser is installed and used, firstly connecting the water inlet filter module with the water outlet of the customer's on-site cooling water system according to the water flow direction indicated by the arrow in Figure 4, and then connect the water inlet filter module with the water inlet of the RFL-C6000S-CE laser, as shown in Figure 5.

Figure 5Thewater inlet filtration module is connected to the water cooling system When the laser is in use, cleaning the Y-type filter of the inlet water filter module periodically according to the water quality of the cooling water system (openning the nut cover of the Y-type filter, taking out the filter screen, cleaning it, reinstall it, and tightenning the nut cover), it is recommended that the cleaning frequency be no less than once a week. 16

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

c) Cooling water requirements: 1） It is recommended to use purified water. 2） In order to prevent mould growing that may lead to pipe blockage, we recommend to add alcohol about 10% of the total volume. 3） If the product is used in an environment that ambient temperature is between -10℃ and 0℃, we recommend to use 30% alcohol, and replace it every two months. 4） If the product is used in an environment that ambient temperature is below -10 ℃ , please to use dual-system chillers (with heating function) and ensure uninterrupted operation of the cooling system. d) Requirements for output cable cooling system: 1） Rate of liquid flow: 1.7-2.0 L/min; 2） Pressure of liquid flow: < 0.6 MPa at the inflow; 3） Type of liquid exchange junction: SMC MS-5H-6: 4） Type of tube: outer diameter6; inner diameter4; 5） Direction of cooling liquid: unidirectional; connect the tube with the water-pipe strictly according to direction shown on the layer of the tube; 6） Type of liquid: de-ionized water, condensed water, pure water; 7） PH value of liquid: 5.5-9; 8） Filter is needed for the cooling system, and the size of the solid residual practical should be within 100um; 9） Maximum temperature of liquid: 45℃: 10）

Minimum temperature of liquid: greater than the saturated dew-point 5℃;

11）

Additive to the liquid: satisfies the requirements of PH value and size of solid

residual practical as above;

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

12）

Radius of the bending of the armored pipe: off-work state (i.e. transportation

and reservation): minimum radius of bending ≥ 20 cm; in-work state: minimum radius of bending ≥ 30 cm; 13）

Long-term vibration < 2 G; Impact action < 10 G.

e) Other requirements for chiller: 1） When starting the cooling system for the first time, check the entire water system and the joint for water leakage. The external water pipe must be installed and connected according to the inlet (IN) and outlet (OUT) by the laser. Other wise, the laser may not work properly. 2） If you will not use the laser for a long time, water must be emptied from the product, and then both the inlet and outlet must be blocked with the nuts we provide. Failure to do so may lead topermanent equipment damage. CAUTION: Please set the water temperature in strictly accordance with the requirements above. Too low temperature may lead to condensation on the laser module and the output cable. This can cause serious damage to the equipment. CAUTION:Please clean the water inlet filter module in time. If the water inlet filter module is blocked, the laser flow alarm or high temperature alarm will be triggered. CAUTION: Make sure that the water temperature reaches the set point and the cooling system is working well before you start the laser. 〖summer：22±1℃；winter： 22±1℃〗

3.4

Installation Procedure

a) Place the product inan still and stable position. b) Check if the power supply has the correct voltage (See Table 4 for the laser model and corresponding input voltage ), and the earth line is connected, make sure it is firm and reliable. 18

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

c) Connect the power cable and control cable to the product when power supply is OFF. d) Insert the water pipes into the inlet and outlet. e) Check the output head and clean it if necessary. This procedure must be performed by personnel of Raycus or authorized by Raycus. Make sure the environment is clean, or the output cable may be contaminated. f)

Prevent the delivery cable from treading, pinching or excessive bending during installation.

g) During the installation and disassembly process, please take care to handle the laser output head gently, avoiding any shock. h) In the installation of laser output cable and output head process, please make sure that the surrounding environment is clean, other wise it may pollute the output head (do not use fans, which actually may bring more dust). i)

The minimum bending radius of the output fiber cable of the laser should not be less than 20 cm under the non-working conditions, and the minimum bending radius should not be less than 30 cm when the laser is working. CAUTION:  All the cables can only be connected when power supply is OFF. Hot plug may damage the laser. CAUTION:  The laser output optical cable should be kept as natural as possible and not be distorted.  The too small bending radius of the output fiber cable will damage the laser. CAUTION:  Make sure the aperture and the cavity of the processing head is clean.  Keep the protective cap properly, prevent it from contamination; Or the aperture will be contaminated when capped.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Using the Product Please use the correct the latest PC software and the relevant manual.

4.1

Front Panel Figure 6 shows the front panel of RFL-C6000S-CE：

Figure 6 Front Panel of RFL-C6000S-CE a) POWER:Control system power indicator light, when the red light is on, it means that the laser is powered on. b) LASER:The laser is emitting light normally. When the green light is on, it means that the laser is emitting light. c) ALARM:Alarm indication, when the yellow light is on, it means that the machine has an alarm. 4.2

Rear Panel Figure 7 shows the rear panel of RFL-C6000S-CE:

Figure 7 Rear Panel of RFL-C6000S-CE 20

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

CDA：Dry air inlet. Power Connection CAUTION: Before connecting the product to AC supply source, you must check for sure that the AC supply you will apply is in accordance with the specifications provided in Table 2 or 4. Table 6 Power Connection Requirements Model

RFL-C6000S-CE

Supply Source

380±15% V AC 50/60Hz

Power Cord

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

5 wires, the diameter of single wire is 4mm2, wires labeled L1，L2，L3and PE

One End of Power Cord

L1，L2，L3-> Phase Line, PE-> Protective Earth

Sign Description

L1, L2, L3->Phase wire, PE->Protective ground wire (one PE wire is required to be connected to the ground wire of the circuit breaker, and the other one is connected to the equipment ground wire to ensure that the laser is fully grounded)

Note

4.4

Interface Definitions

4.4.1

CTRL-INTERFACE Definitions The CTRL-INTERFACE(DB-25) is for laser control, the designation and definition is

below：

Figure 8 Diagram of CTRL-INTERFACE Table 7 Definitions of 24 pin Ctrl Interface PI N No .

Name

LineMark

Interlock1A

ITL-1A

Interlock2A

ITL-2A

Interlock2B

ITL-2B

Interlock1B

ITL-1B

Type

Contact Closure Input

Level

24Vdc

Drive Current

<10mA

Typical Respon se Time

Description

<500m s

“EN954-1” or”ISO13849-1 Cat.3PLd”. Passive contact, not connected to external voltage or grounding.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Remote Key

RPA

Switch 9

RPB

STARTA

Remote Start Button 11

START-B

Contact Closure Input

Instantaneou s Contact Closure Input

24Vdc

Analog Input to Control Current

1-10V

Analog Input

Analog Output Power Monitor

AOUT

Analog Output

0-8.0

Isolated Analog Com

AGND

Return

Modulation+

MOD+

Modulation-

Guided Laser Control

Emission Enable

1-10

---

20s

Activates the internal control system power supply in REM mode. Passive contact, not connected to external voltage or grounding.

In REM mode, start the laser main power supply.Passive contact, not connected to external voltage or grounding. Analog Input 1-10 VDC= 10 – 100% Setpoint Analog Output 0-8VDC（Refer to factory inspection report for details）

10 mA

100µs

>5mA

20µs

---

Return for signals on pins 12, 13

Digital Input

24VdC

<10 mA

20µs

24 VDC Input

MOD-

Return

---

Return for signal on pin 15

RED-LAS ER

Digital Input

5-24Vdc

<10 mA

120ms

Positive edge activates emission in REM mode

LAS-C

Digital Input

5-24Vd C

<10 mA

120ms

Positive edge activates emission in REM mode

Vdc

READY

Digital output

24VdC

＞ 10mA

120ms

High=Laser is ready

System Common

GND2

Return

---

Return for pin 17/18/19/21/22/23/24

Error RESET

RESET

Digital Input

5-24Vd C

<10 mA

120ms

Rising edge reset (the resettable alarm)

Laser Alarm

S-ERR

Digital output

24VdC

＞ 10mA

120ms

High=Alarm status

Power started

POWER

Digital output

24VdC

＞

120ms

High= The main power 23

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

10mA 24

Laser emission

LASER

Digital output

24VdC

>10mA

supply is started 100ms

High=Laser is emission

 Caution: Please check the control voltage level and ensure that the level is in accordance with the requirements. Over voltage and voltage ripple may damage the product. The Service Security Interface is pin 1-4 and pin2-3， of CTRL-INTERFACE.If the pin 2-3 and pin 1-4 are disconnected, the laser will immediately stop emitting light, and the laser Ready signal output will change to low level. Be sure to short-circuit pin 2-3 and pin 1-4 before using the laser. If it is not short-circuited, the laser will display InterLock alarm after power-on.  Interlock interface must not be connected to active signal, otherwise it will cause interface damage and laser alarm.

4.4.2

TCP/IP Interface Configuration

Thedefault IP address of this product is 192.168.0.10, only supporting UDP communication. The laser listens for connection on port is 8098, and the command must be sent in a single data string. Table 8 Thepin definitions of Ethernet interface PIN 1 2 3 4 5 6 7 8

FUNCTION TX+ TXRX+ N/C N/C RXN/C N/C

DESCRIPTION TRANSMIT+ TRANSMITRECEIVE+ NONE NONE RECEIVENONE NONE

For better communication stability, recommend to use this interface first. Table 9 The default IP address of the laser The default IP address of the laser IP address

192.168.0.10 24

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Subnet mask

255.255.255.0

Steps of Ethernet connection: a) Open “Local Connection” on your computer, and then click “property”; b) Select "Internet Protocol Version 4 (TCP/IP 4)； c) Click the “Property”; d) Check “Use the following IP address:” to manually assign an IP address; e) Manually assign an IP address is 192.168.0. x（x cannot be 10, because 192.168.0.10 has been assigned to the laser ） , and assign a subnet mask address. The default is 255.255.255.0; f) Click the "OK" button to confirm the settings and exit. The IP address is different from the default gateway, see Figure 9.

Figure 9 Steps of Ethernet Connection When the IP setting is completed, turn on the host computer, and the connection status in the corresponding text box on the host computer interface displays: connected, indicating that the

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

microcontroller program is running normally and the communication connection is normal. The display interface is shown in Figure 10 below.

Figure 10 The main interface is displayed when the communication connection is normal 4.5

Steps of Installation

a) Carefully takeout the laser from the box and move it to the installing position and then lock the casters; b) Remove the output cable protective cap and check the output lens for dust with strong light and clean it if necessary, then cover the output cable protective cap; c) Install the output cable on the processing equipment according to the actual situation (install the output head cooling water pipe at the same time), pay attention to the output cable and head,then remove the protective cap andconfirm that the output lens is clean and install the output head； d) Connect cooling water pipe; e) Connect the control line and power according to the control mode.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

4.6

Steps of Starting It is determined that the air switch is disconnected, and all electrical connections must be

completed before the laser is powered on; a) Make sure that the pins the 24-pin are closed; b) Turn on the chiller and check leakage. If there is no water leakage, turn off the chiller and wait for the laser to turn on; c) Turn on the air switch ; 4.7

Functions of the clientware The RFL-C6000S-CE clientware communicates with the main control board through UDP

when it is working. Through the background program running in the software and the human-computer interaction operation, the laser parameters are read and set and the control functions are realized. The interface displayed by the software is divided according to functional categories, including control, alarm, about, language selection, authorization, working mode selection and other pages.

Figure 11 The clientware interface 27

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

4.7.1

The control interface The control interface is the content displayed on the first page after opening the clientware,

including the user's most commonly used status signal, laser parameter setting and laser control related functions. Control abnormal laser reset: Click the reset button to run the abnormal laser reset command. Guide laser: the guide laser is turned on or off in the internal control state of guide laser. After the guide laser is turned on or off, there will be changes in the guide laser state on the software. Guide laser external control: turn on the guide laser external control or turn off the guide laser external control. After turning on and turn off the guide laser external control, there will be changes of the guide laser external control state in the software.If the current red external control state, then disable the red control button. Control laser parameters: Optical output parameters include power, frequency, pulse width, and duty cycle. The communication between the software and the main control board requires only power, frequency, and pulsewidth.The duty cycle can be calculated from the pulse width and frequency, and the pulse width can also be calculated from the duty cycle and frequency. During the software operation, the frequency and duty cycle will be changed synchronously with the pulse width, and the duty cycle will also be changed synchronously with the frequency and duty cycle. The output power can be an integer in the range of [0,100]. The frequency can be set to a decimal in the range of[0,20000]. The duty cycle can be set to a decimal in the range of [0,100]. Control light emission mode: light emission related modes include AD mode, external enable, external modulation mode, and internal modulation mode. You can individually control the opening and closing of each mode, and display the current status of each mode. After the AD mode is turned on, the optical power is controlled by an external signal, and the power setting 28

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

function of the software should be set to a disabled state. When the external modulation mode is turned on, the frequency, pulse width and duty cycle are controlled by the external modulation signal, and the function of the software to set the frequency, pulse width and duty cycle should be set to the disabled state. Control the light: control to turn on or off the laser emission or laser enable. Only when the laser has a ready signal, can it be controlled normally, otherwise the buttons for turning on and off the laser are set to the disabled state. When the external control light enable is turned off, and the external modulation mode or internal modulation mode is turned on, the "laser enable" is displayed, otherwise, the "laser emission" is displayed. Status display: Including emergency stop, laser enable, Interlock logic normal, Interlock1 closed, Interlock2 closed, power ramp up and down, program mode, program execution, program execution completed, program execution abnormal and other most commonly used laser states, and machine Internal ambient temperature, internal ambient humidity, dew point, external 0-10V, light output frequency, light output duty cycle, light pulse width, laser water flow, output optical cable water flow and other data. These status and data refresh time intervals should not exceed 300ms. Laser usage time display: including today's turn-on time, today's light-emitting time, cumulative turn-on time, and cumulative light-emitting time. 4.7.2

The alarm interface All the alarm information of the current laser is displayed on the alarm interface, and the

alarm information is updated in real time.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure 12 The alarm interface 4.7.3

About The laser time, model, serial number, master control serial number, key version number and

system information are displayed in the interface，when the about interface is opened, the upper computer software reads them from the master control module once.

Figure 13 The about interface 4.7.4

Language Selection

In the language selection interface, you can set the language used by the software. After selecting the language and clicking OK, you do not need to restart the software, automatically convert the content displayed in the software into a language, save the currently selected language to the configuration file, and display it according to the last set language when starting 30

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

the software next time.

Figure 14 Language selection interface 4.7.5

Authorization The authorization interface is used to control the limited time lock of the laser, when the

authorization interface is opened, the machine code, laser lock time and lock time are loaded once, the laser lock time is Raycus's limited time lock for integrators, and the lock time is for the integrator to end customers. Limited time lock. In the authorization interface, only Raycus’ authorization code can be set, and the function of calculating the authorization code is implemented in the server and has nothing to do with the host computer software. The authorization code used by the integrator can be generated in the authorization interface.

Figure 15 Authorization interface 31

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

4.7.6

The Mode Selection function Select the operating mode of the software, including monitor mode, control mode,

diagnostic mode, and debug mode. Monitor mode: The monitor mode is selected by default when the software is opened. The most commonly used and concerned information is displayed on the software interface to avoid the interference of too much information to the user. The monitor mode can be used without password. Control mode:

The control mode adds the function of the operable control interface on the

Main control module The main control module contains all states, alarms and system parameters of the main

control module. The status and alarm information are automatically refreshed. Only when the currently selected page is in the main control module, the upper machine software will automatically read and refresh status and alarm information information information. , Reduce the frequency of communication and avoid too many resources to occupy the main control module.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure 16 Main control module status information interface

Figure 17 Alarm information interface of main control module 4.7.8

Slave control module Power surveillance contains the alarm of the ACDC module and DCDC module. The

monitoring enables the control, the failure level is high, the low level is set, the level is high, low settings, and the CAN communication enables the settings. 33

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure 18 Slave control module status information interface 4.8

Control Modes The laser selects AD mode, external control, internal modulation mode and external

modulation mode through the upper machine interface. 4.8.1

Control mode wiring diagram

4.8.2.1 Internal control

mode

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure19 Internal control wiring diagram mode Operation method:

a) Short connection of 8, 9 pin on the 24 -pin of 24 stitches (power on the control board); b) Open the air, the panel "POWER" indicator lights; c) Open the upper machine software and close all the external mode (turn off the red light external control, external envelopes, external AD and external modulation); d) Click the red light button to view the red light; e) Set out the light parameter; f)

Click “laser ON”.

4.8.2.2 Internal/external modulation modes for power and communication

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure 20 Wiring diagram of internal power control and external signal control Operation method: a) Shortconnect the 8 and 9 pins on the INTERFACE 24 pins (the control board is powered on); b) Open the laser clientware; c) Click “the guide laser ON” button to view the guide laser; d) Disabling the AD mode and the external envelopes。 e) Waiting “Ready”; f)

Setting laser power parameters;

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

software); the internal output frequency of the laser is not required When the duty cycle is used, the default setting parameters are that the frequency is 100Hz and the duty cycle is 100%. h) Modulation signal (15, and 16-pin) provide a high level to turn on the laser. 4.8.2.3 Power communication setting parameters in the external control mode, external modulation, external envelopes

Figure 21 In the external control mode, the power internal control, out -of -light external control, and the external enable wiring chart Operation method: a) Shortconnect the 8 and 9 pins on the INTERFACE 24 pins (the control board is powered on); b) Open the laser clientware; c) Click “the guide laser ON” button to view the guide laser; d) Turn off

the AD mode, and opening external enable mode 、 external modulation mode;

e) Waiting “Ready”; 37

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Interface 24 stitches on 18 pins input rising edges;

15, 16 -foot adjustment signal output high level to turn on laser.

4.8.2.4 In the external control mode, the power simulation amount is set in external settings, external modulation mode, internal control enable enable

Figure 22 In the external control mode, the power and light are all external control wiring diagrams Operation method: j)

Shortconnect the 8 and 9 pins on the INTERFACE 24 pins (the control board is powered on); 38

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

k) Open the laser clientware; l)

Click “the guide laser ON” button to view the guide laser;

m) Open the AD mode、external modulation mode, turn off the external enable. n) Waiting “Ready”; o) When the internal output frequency occupation ratio of the laser, set out the light frequency/duty cycle/pulse width; (out of the output of the light and the output ratio of the upper machine software set by the 15.16 -footed signal and the upper machine software); the internal output frequency of the laser is required for At the time of occupation ratio, the default setting parameter is 100Hz, and the duty cycle is 100%; p) Control board card output analog (12, 14 pin) and outlet signals (15, 16 pin). 4.8.2.5 In the external control mode, the power simulation amount is set in external settings, external modulation mode, external enable

Figure 23 In the external control mode, the power, light, and enable all control wiring diagrams Operation method:

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

q) Shortconnect the 8 and 9 pins on the INTERFACE 24 pins (the control board is powered on); r)

Open the laser clientware;

Click “the guide laser ON” button to view the guide laser;

Open the AD mode,

the external enable, the external modulation mode;

u) On Click on the main power ON; v) Waiting “Ready”; w) Interface 24 stitches on 18 pin input rising edges;

x) When the internal output frequency occupation ratio of the laser is required, set out the light frequency/duty cycle/pulse width; (out of the output of the light and the output of the output of the 15.16 -pin and the output ratio of the upper machine software); no internal output inside the laser is required When the frequency occupation ratio, the default setting parameter is 100Hz and the duty cycle is 100%.

y) Control board card output analog (12, 14 pin) and outlet signals (15, 16 pin). 4.8.2.6 Modification mode and Gate mode Modification mode: When the duty cycle of the internal frequency of the laser is set to 100%, the laser works in the external modulation mode. Gate mode: When the duty occupation ratio of the internal frequency of the laser is less than 100%, the laser works in the internal modulation mode. Stop the internal pulse occurring; 4.9

Guide laser control Table10

Guide laser control

Guide laser control ON

17 pin of INTERFACE Rising edge -- turns on guide laser; Fallingedge -- turns on guide laser.

OFF

The clientware： Red ON -- turns ON guide laser; Red OFF -- Turns OFF guide laser. 40

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

4.10 The Programming Mode (Waveform Editing)

Figure24 Single -machine mode -continuous control time sequence diagram

Figure25 Single -machine mode -pulse control time sequence diagram

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure 26 Modify mode control time preface diagram

Figure 27 Gate mode control time sequential chart

4.11

Modulation signal requirements

The modulation frequency range of the RFL-C6000S-CE laser is 1-20000Hz, and the minimum pulse width of the laser must be greater than or equal to 160μs, reference value of laser frequency and duty cycle setting is shown in Table 11. Table11 Reference value of the frequency and duty occupation ratio of laser Frequency Vein 95% 90% 80% 70% 65% 60% 55% 50% 45% 40% 35% 30% 25% 20% 15% 10% Duty ratio 5000Hz 190μs 180μs 160μs

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

4500Hz 4000Hz

200μs 177μs 200μs 175μs 162μs

3500Hz

200μs 185μs 170μs

3000Hz

200μs 183μs 166μs

2500Hz

200μs 180μs 160μs

2000Hz

200μs 175μs

1500Hz

200μs 166μs

1000Hz

200μs

500Hz

4.12

300μs 200μs

Steps of shutting down

Please turn off the laser in the order below: a) Turn off the emission; b) Disconnect the air switch; c) Turn off the cold water machine; d) Cover the output head protection cap; 4.13

Bluetooth app operation description

4.13.1 Log in After opening the single -mode laser app, there is an account password login page, as shown in Figure 28:

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure28 login interface

4.13.2 Connect After entering the login interface, enter the mobile phone number and password, and then click the login. After the login is successful, enter the APP connection page, as shown in Figure 29:

Figure29 Verification code login interface Open the Bluetooth switch of the single -mode laser app. If there is a Bluetooth device nearby, ensure that the switch of the Bluetooth device is turned on and click the "Search" button on the connection page. 44

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure 30 connect Click the "Connection" on the right side of the searched Bluetooth device to enter the connection state, as shown in Figure 31:

Figure 31 connecting

4.13.3 Equipment After the connection is successful, enter the laser device-status interface, as shown in Figure 32: 45

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure32 device status The device status page mainly includes the main power supply, equipment, alarm, and light state display, as well as the state of light percentage, light power, laser temperature status, and the state of emergency stop, REM, laser enablement, red light display, and laser device, and laser The specific state and some parameter values are displayed. There is also a device-alarm page, as shown in Figure 33:

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure33Equipment-alarm If the device alarm page is connected to the laser, the laser is not alarm, and the interface will display "No alarm, check the historical records!", If there is a alarm state, the specific title of the alarm will be displayed. The state display of the laser also has the setting function that supports some parameters. It can be visible in the device-settings interface, as shown in Figure 34:

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure34 Equipment-Settings In the device-lock interface, the laser can be locked or unlocked to the laser through the device authorization code. The specific form of the page is shown in Figure 35:

Figure35 Equipment-Lock

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

4.13.4 My page Entering my page, you can see function introduction, version update, and about machines, as shown in Figure 36.

Figure36 page The function introduction interface is a specific introduction to the laser. As shown in Figure 37:

Figure37 Features

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

The version update interface is the content of the current version of the laser and the content of the upgraded version. As shown in Figure 38:

Figure38

new version update

Mine-about the machine page shows the relevant information of the laser, such as laser time, laser model, laser serial number, main control serial number, key version number, system information. As shown in Figure 39:

Figure39 Mine-About the machine 50

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

In my-about machine-system information page, and laser detailed information. As shown in Figure 40:

Figure 40 Mine-About Machine-System Information

4.13.5 Software introduction The single -mode laser app is a mobile software that can be connected to the laser through Bluetooth to facilitate the after -sales, maintenance, and commissioning engineers, etc., without portable notebooks, you can use the single -mode laser app installed on Android phones to and the laser. Connect, read the state of the laser or set some parameters, which is conducive to the rapid, effective and convenient solution to some problems in the use of laser use. 5

Alarms and Solutions

5.1

Alarms Display Connect the computer and open the host computer software, after the laser and the client

software establish normal communication. All alarm states of the laser can be displayed on the host computer software interface, as shown in Figure 41. When the internal temperature of the laser is abnormal, the power is abnormal, the scattered light is abnormal, the power supply is abnormal, the condensation is abnormal, the flow rate is abnormal, etc., the laser will alarm. 51

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Figure41 The homepage of the clientware If any alarm occurs (except for Interlock alarm)when the laser is running, the clientware will display the alarm that occurs, and the ALARM light (yellow) on the front panel of the laser will light up, the laser will stop emitting and lock. When the Interlock is abnormal, the output of Ready signal is low, and the Interlock state is abnormal in the clientware, but the laser is not locked, and the ALARM light (yellow) is not lit. Theoutput of Ready signal is on high level when the Interlock is normal. 5.2

Alarm solutions

The instructions and solutionsof alarms are as follows: Table 12 Instructions and solutionsfor alarms of laser Alarm name

Alarm instructions and solutions

T1/T2 Alarm

Instruction: Low temperature/high temperature alarm of the laser. The sensor in the laser detects an abnormal temperature inside the laser. A high-temperature / low-temperature error occurs when the temperature at the monitoring point exceeds the set upper / lower limit. Solution: High temperature alarm,please check if the water-cooling system is normally working, the water temperature is set correctly, and the water connection is correct. When the water cooling system works normally and the water temperature drops below 30°C, restart the laser. 52

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Low temperature alarm, please check if the actual water temperature of the water is too low. In addition, a low ambient temperature may also cause a low temperature alarm when the laser is cold. Please wait until the water temperature of the water rises above 10°C.

Laser Water flow

Instruction: The water flow rate of the laser alarms. The current water flow rate detected inside the laser is lower than the required value, and there is a safety risk. Solution: Stop using the laser immediately.Please check the output model and working status of the laser water cooler and clean the laser water filter module according to the laser operation requirements in the section 3.3 cooling System Installation and Requirements.It is recommended to clean the water cooler and the water inlet filter assembly regularly, and replace the cooling water.

Scattered Light Alarm

Instruction: Scattering light alarm, when the intensity of ambient light inside the laser exceeds the set value, the scattering light alarm will be generated, and the laser emission function will be locked (cannot be unlocked).The scattered light alarm only occurs when the laser emission. Solution: Please restart the laser, check the guide laser state of the laser, and through the clientware "from the control module" reading the scattered light monitoring voltage value, and contact Raycus.

Instruction: The alarm is generated when the emission of the laser cannot reach the set value. Power error occurs only when the laser is emitting. Laser Power Alarm Solution: Please restart the laser, check the red light state of the laser,and contact Raycus.

AC DC Alarm

Instruction: AC DC Error, failure ofthe laser power supply or sudden power failure of the power supply system may cause an alarm. Solution: Check if the input AC voltage is normal. Restart the laser, if this error continues to occur, please contact Raycus.

Current Driver Alarm

Instruction: Current Driver Alarm,this error occurs when the constant current driver board inside the laser is abnormal. Solution: 53

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

Restart the laser, If this error continues to occur, please contact Raycus In addition to the above, if there are any questions or errors inusing of the laser, you can contact Raycus to get help. 6 6.1

Warranty, Return and Maintenance General Warranty Raycus warrants that all Raycus fiber laser products are conformed to applicable product

specifications under normal use and are free from defects in materials and workmanship. The warranties start on the date of shipment from Raycus for a period of time as set forth in the applicable purchase contracts or product specifications. Raycus has the right to choose to repair or replace any product that proves to be defective in materials and workmanship selectively during the warranty period. Only products with particular defects are under warranty. Raycus reserves the right to issue a credit note for any defective products produced in normal conditions. 6.2

Limitations of Warranty The warranty does not cover the maintenance or reimbursement of our productof which the

problem results from tampering, disassembling, misuse, accident, modification, unsuitable physical or operating environment, improper maintenance, damages caused by those who are not from Raycus due to excessive use or not following the instructions.Customer has the responsibility to understand and follow this instruction to use the device. Any damage caused by fault operating is not warranted. Accessories and fiber connectors are excluded from this warranty. According to the warranty, client should write to us within 31 days after the defect is discovered. This warranty does not involve any other party, including specified buyer, end-user or customer and any parts, equipment or other products produced by other companies.  It is the customer’s responsibility to understand and follow operating instructions in this User Guide and specifications prior to operation-failure to do so may void this warranty.Accessories and fiber connectors are not covered by this warranty.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-C6000S-CE

6.3

Service and Repair a) Do not open the device. There are no user serviceable parts, equipment orassemblies for user in this product. All service and maintenance shall be performedby qualified Raycus personnel. b) Please contact Raycus as soon as possible when problems under warranty about maintenance happened to the product. c) The product returned with permission should be placed in a suitable container. d) If any damage happened to the product, please notify the carrier in document immediately. We reserve the right to make changes in design or constructions of any of our

products at anytime without incurring any obligation to make changes or install the same on units previously purchased. All the items about warranty and service above provided by Raycus are for user’s reference; formal contents about warranty and service are subject to the contract. © 2023 Wuhan Raycus Fiber Laser technologies Co. Ltd, All Rights Reserved.

RAYTOOLS X C3000T2.0 Series Laser Cutting System User Manual

XC3000T2.0 Laser Cutting System User Manual

Foreword Thank you for choosing our products! This manual provides detailed instructions on the installation and debugging of the laser cutting software to help you quickly get started using this product. If you have any other questions, please feel free to contact our company. Due to continuous updates to product features, the product you receive may differ in some aspects from the descriptions in this manual. We sincerely apologize for this. We reserve all rights to this document, including any granted patents and other registered commercial proprietary rights involved. Improper use of this document, especially copying and distributing it to third parties, is strictly prohibited. If you find any errors in this document, please notify us as soon as possible. The data contained in this manual is for product illustration purposes only and should not be construed as a statement of security interest. For the benefit of our customers, we continuously strive to ensure that the products we develop comply with the latest technologies.

XC3000T2.0 Laser Cutting System User Manual

Disclaimer 

We reserve the right to change the design for reasons such as improving quality, expanding application methods, or based on manufacturing processes.



Our company assumes no responsibility for any losses or accidents caused by incorrect operation or improper handling of our products.



Disassembling the product will void all warranty claims, including but not limited to the normal replacement of worn parts and parts required for maintenance or commissioning.



Unauthorized alteration of the product or use of unsuitable spare parts will directly invalidate the warranty and liability exemption.



We recommend using only the spare parts provided by our company, or having our company or a designated professional team perform the installation.

Usage Guidelines 

Ensure that the product is used in a dry environment.



Ensure the product is used in an environment that meets EMC standards.



The product is only allowed to run within the parameter range specified in the technical data.

Personnel Responsibilities 

Familiar with basic regulations on work safety and accident prevention, and have received equipment operation guidance.



Read and understand the basic safety instructions and procedures.



You must study the relevant regulations and safety instructions and understand the potential dangers.



Comply with relevant regulations and implement corresponding protective measures.

XC3000T2.0 Laser Cutting System User Manual Safety Precautions  1)

Preventing electric shock Laser head components, such as nozzles, sensors, sensor interfaces, and attached

fasteners, may not be fully protected by grounding due to functional limitations. These components may carry low voltage. When installing electrical equipment, take precautions to prevent electric shock for personnel. 2) 

Note that the equipment should be grounded as required. Prevent danger

1) Never place your hands or other body parts under the laser head. 2) Repair and maintenance work can only be performed after the power is turned off. 3) The maximum pressure shall not be exceeded. 4) It is essential to ensure that the laser head is in good working order at all times. 5) All fasteners, such as bolts and nuts, must be tightened.



Laser protection

1) Avoid direct or diffused radiation that could cause damage to the eyes or skin. 2) Do not look directly at the laser beam, even when wearing optical equipment. 3) Use dedicated laser protective goggles that meet relevant standards. 

Prevent waterway corrosion

To avoid corrosion, use the specified coolant and comply with relevant requirements and prescribed maintenance intervals. 

Noise prevention

When cutting at high air pressure, in order to prevent personnel from being harmed by noise, corresponding measures should be stipulated or explained, and these measures should be followed. 

Storage and Transportation

1) Comply with the storage temperature range allowed by the technical data. 2) Take reasonable measures to prevent fire, vibration or impact. 3) Do not store near magnetic fields.

XC3000T2.0 Laser Cutting System User Manual Table of contents Preface ............................................................................... 2 Disclaimer .............................................................................3 I. Quick Start Guide .................................................................... 11 1.1 Starting with ....................................................................... 11 1.1.1 Open the software .............................................................. 11 1.1.2 Introduction to the User Interface .................................................. 12 1.1.3 Toolbar ........................................................................ 12 1.1.4 File Menu ......................................................................13 1.2 Operation Procedure ..................................................................15 1.2.1 Finding the origin ............................................................... 16 1.2.2 One-click calibration ............................................................ 16 1.2.3 Importing Graphics and Optimization Processing ...................................... 17 1.2.4 Process Setup .................................................................. 19 1.2.5 Toolpath Planning ............................................................... 20 1.2.7 Pre-processing inspection .........................................................21 1.2.8 Actual Processing ............................................................... 21 1.3 Common Menus ..................................................................... 23 1.3.1 Select ......................................................................... 23 1.3.2 displays ....................................................................... 29 1.3.3 NC Code ...................................................................... 31 1.3.4 Size .......................................................................... 31 1.3.5 Geometric Transformations ........................................................ 33 1.3.6 Lead .......................................................................... 35 1.3.7 Clear ..........................................................................37 1.3.8 Starting point ...................................................................37 1.3.9 Stop .......................................................................... 38 1.3.10 Compensation ..................................................................39 1.3.11 Yang cut ..................................................................... 40 1.3.12 Incision .......................................................................41 1.3.14 Circumferential Cut ............................................................. 41 1.3.15 Micro-connection .............................................................. 43

XC3000T2.0 Laser Cutting System User Manual 1.3.16 Reverse ....................................................................... 45 1.3.17 Overcut .......................................................................46 1.3.18 Release angle ..................................................................47 1.3.19 Rounded corners ................................................................48 1.3.20 Cooling point ..................................................................49 1.3.21 Sorting ....................................................................... 51 1.3.22 Array ........................................................................ 52 Group ....................................................................... 53, 1.3.23 1.3.24 Flying Cut .................................................................... 54 1.3.25 Shared Edge ...................................................................56 1.3.26 Bridging ...................................................................... 56 1.3.27 Measurement .................................................................. 57 Version 1.3.27 optimized .............................................................. 58 1.4 Drawing ........................................................................... 60 1.4.1 Straight line ....................................................................60 1.4.2 Rectangle ...................................................................... 60 1.4.3 Circle ......................................................................... 61 1.4.4 Multi-segment ..................................................................61 1.4.5 Single point .................................................................... 62 1.4.6 Text .......................................................................... 62 1.4.7 Cutting ........................................................................ 63 1.4.8 Extension ...................................................................... 63 Group .......................................................................... 631.4.9 1.4.10 Sorting and Alignment .......................................................... 63 Version 1.4.11 optimized .............................................................. 63 1.5 kit ................................................................................63 1.5.1 Part ........................................................................... 65 1.5.2 Nesting column ................................................................. 66 1.5.3 Layout parameters ............................................................... 67 1.5.4 Advanced Parameters ............................................................ 68 1.5.5 sheet material .................................................................. 69

XC3000T2.0 Laser Cutting System User Manual II. Introduction to Process Interface .................................................... 70 2.1 Common process interface ............................................................ 71 2.2 Process Tree ....................................................................... 72 2.3 Layer ............................................................................. 72 2.4 Processing Type .....................................................................73 2.5 Cutting parameters ...................................................................74 2.6 Other parameters .................................................................... 74 2.7 Power Curve ....................................................................... 75 2.8 perforation ......................................................................... 77 2.9 Advanced Parameters ................................................................ 78 2.10 Remarks .......................................................................... 81 2.11 Import/Export ..................................................................... 81 2.12 Global Parameters .................................................................. 82 2.13 Material library configuration ......................................................... 86 2.14 Confirm, Cancel, Apply buttons ......................................................89 III. Console ........................................................................... 89 3.1 Coordinate System .................................................................. 89 3.1.1 Mechanical Coordinate System .....................................................91 3.1.2 Program Coordinate System ....................................................... 91 3.1.3 Manual Control ................................................................. 94 3.1.4 Machining Control ............................................................... 96 IV. CNC Auxiliary Functions .............................................................100 4.1 Simulation ........................................................................ 101 4.2 Enable ............................................................................ 101 4.3 Return to origin .................................................................... 101 4.4 Edge Finding ...................................................................... 102 4.5 Error Detection .....................................................................107 4.6 Focus Test ........................................................................ 107 4.7 Processing Task .................................................................... 107 4.8 Boot-up prompt ................................................................... 108 4.9 Maintenance ....................................................................... 108

XC3000T2.0 Laser Cutting System User Manual 4.10 Switchboard One-Click Switching ................................................... 108 4.11 Capacitive Sensor ................................................................. 109 4.12 Height Adjuster Parameters ..........................................................109 4.13 Lubrication ....................................................................... 113 4.14 Dust Removal .....................................................................113 4.15 Interface Settings ..................................................................114 4.16 Forced Reset ..................................................................... 116 4.17 View thread call information ........................................................ 116 4.18 View ........................................................................... 116 4.19 Bottom Status Zone ............................................................... 116 4.20 Drawing Log ..................................................................... 116 4.21 System Log ...................................................................... 117 4.22 System Alarm .................................................................... 117 I. Quick Start Guide to Pipe Cutting ................................................... 118 1.1 Open software ..................................................................... 118 II. Introduction to CNC Application Functions ..........................................119 2.1 Common Toolbar ................................................................... 119 2.2.1 File Menu .....................................................................120 2.3 Return to origin .................................................................... 122 2.4 Exercise Settings ................................................................. 124 2.5 Error Detection .....................................................................127 2.5.1 Roundness Test ................................................................ 127 2.5.2 Rectangularity Test ............................................................. 128 2.6 Machine Tool Settings .............................................................. 129 2.6.1 Find ......................................................................... 129 2.6.2 Pipe surface correction .......................................................... 131 2.6.3 Automatic centering configuration ................................................. 131 2.6.4 Pipe Cutting ...................................................................133 2.6.5 Machine Tool Debugging .........................................................133 2.6.6 Edge probing configuration ....................................................... 136 2.6.7 Edge Finding Repeat Accuracy Analysis ............................................ 138

XC3000T2.0 Laser Cutting System User Manual 2.6.8 Security Configuration ........................................................... 139 2.6.9 Parts lifting configuration ........................................................ 148 2.7.0 Flip Configuration .............................................................. 150 2.7.1 Supports configuration ........................................................... 151 2.7 Calibration ........................................................................ 153 2.7.1 Capacitive Sensor .............................................................. 154 2.8 Height Adjuster .................................................................... 155 III. Mode Function Description ........................................................ 159 3.1 Step ............................................................................. 159 3.2 Manual debugging .................................................................. 162 3.3 Laser dot marking .................................................................. 163 3.4 Blowing Pressure Setting and Gas Selection ............................................ 163 3.5 Forward/Backward ................................................................. 164 3.6 Breakpoint Location/Breakpoint Continuation .............................................164 3.7 Processing Count Management ........................................................ 165 3.8 Cyclic processing .................................................................. 167 3.9 Coordinate display ..................................................................168 4.0 Reset capacitor .................................................................... 168 4.1 Process Editing .................................................................... 169 IV. Process Interface ................................................................. 175 4.1 Process Tree ...................................................................... 176 4.2 Layer ............................................................................ 177 4.3 Processing Type ....................................................................177 4.4 Cutting parameters ..................................................................178 4.5 Power Curve ...................................................................... 180 4.6 puncture .......................................................................... 181 4.7 Remarks .......................................................................... 182 4.8 Import/Export ..................................................................... 183 4.9 Material Library Configuration ........................................................ 183 V. Common Alarm Handling Methods .................................................184

XC3000T2.0 Laser Cutting System User Manual 5.1 Collision alarm .................................................................... 184 5.2 Sensor not connected, data cable broken alarm ......................................... 187 5.3 Communication network failure ....................................................... 187 5.4 Network communication failure/network communication interruption ......................... 188 5.5 Capacitive sensor offline/TRA wire broken or lower end detached ......................... 188 5.6 Follow-up jitter/follow-up overshoot phenomenon ...................................... 189 5.7 Capacitance value fluctuates greatly ................................................... 189 5.8 Motion axis alarm tracking error ...................................................... 189

XC3000 T2.0 Series Laser Cutting System User Manual

I. Quick Start 1.1 Getting Started 1.1.1 Open the software

After the software is installed, this

icon will appear on the desktop. Double-click it

with the left mouse button to run the PipePanelHMISwitch laser cutting control software .

Select the planar software and click to enter.

XC3000 T2.0 Series Laser Cutting System User Manual 1.1.2 User Interface Introduction The main interface is one of the most frequently used interfaces by customers , and it has many operation areas , as shown in the following figure:

1: Menu 2: Toolbar 3: Drawing shortcut area 4: Graphic Area 5: Console 6: Process Toolbar 7: Log 8: Bottom Status

1.1.3 toolbar As shown in the image below , the toolbar is divided into four tabs: "General," "Drawing," "Layout," and "CNC." Selecting a tab displays its contents; during processing, a "Processing" tab appears, and you cannot switch to another tab until you stop. Each page's toolbar is further divided into multiple "columns" according to function, such as "View," "Geometric Transformation," and "Process Settings"; various function buttons are distributed within the columns. Please note that some function buttons have a small triangle below them, called a "drop-down 12

XC3000 T2.0 Series Laser Cutting System User Manual button." Clicking the "drop-down button" provides more detailed function options. Hovering the mouse over the function button will display a highlighted rectangle. Clicking the upper part of the button directly executes its function, while clicking the lower part opens a "drop-down list," which executes the corresponding function. Some columns have a small button "

" in the lower right

corner , called an "expand button." Pressing this button will open a dialog box with relevant parameters. See the image below:

1.1.4 File menu In the upper left corner of the toolbar, there is a "File" menu , which contains several file-related menu items. Clicking the "

" button will open the menu, as shown in the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

1) New Click this button to discard the current drawing and create a new empty drawing.

2) Open Click this button to import the processing graphics. It supports file formats such as dxf, emw, nc , and nsp .

3）Import It can be used to import a new file into the drawing board without clearing the existing graphics on the drawing board. 14

XC3000 T2.0 Series Laser Cutting System User Manual 4 ) Save Save the current drawing; clicking this button will bring up a prompt to select a disk path to save the drawing. It also supports file formats such as dxf, emw, and nc .

5 ) User Settings You can configure some customizable parameters, including automatic optimization settings for imported graphics, layer color settings, advanced parameter settings, shortcut key instructions, and snap settings.

6 ) Parameter Backup Full system backup; Clicking this button will bring up a menu where you can select the disk path and save the backup parameters.

7 ) Save fault information with one click Save fault information; clicking this button will bring up a window where you can select a save path to save the fault information.

8 ) Diagnostic tools The main functions include handle detection, IO monitoring, capacitive sensor, hardware information , gas DA calibration, machine tool coordinate information, burn-in test, and self-tuning .

9 ) Installation tools The main equipment used for setting up machines before they leave the factory includes ballbars and interferometers.

10 ) Report Click this button to print the processed graphic as a paper file or PDF document.

1.2 Operating Procedures

XC3000 T2.0 Series Laser Cutting System User Manual 1.2.1 Finding the origin After opening the software, click the "Return to Origin" button under CNC Page Break, check the "Return to Zero" axis (all axes are checked by default), and click " Start Return to Origin " to wait for the machine to find the origin, as shown in the figure below:

1.2.2 One-click calibration After the machine tool returns to its origin, move the cutting head to a point above the cut plate that is flat and free of slag. Under CNC pagination, click the "Capacitive Sensor Drop-down Button" to bring up the drop-down menu. Click the "One-Click Calibration ( Current Point ) " button, as shown in the figure below:

XC3000 T2.0 Series Laser Cutting System User Manual

1.2.3 Importing Graphics and Optimization Processing After the cutting head is calibrated, import the graphic to be processed, click the "File" menu, and then click "Open", as shown in the following figure:

After opening, an import drawing dialog box will pop up. Locate the machining drawing on the disk, select it, and then click "Import". Currently, drawing import supports four file formats: DXF, EMW, NC, and NSP . See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

1) Current path Displays the path to the current file. 2) Disk display You can select the file on the corresponding disk here. 3) File selection bar All folders and files in the current disk path that meet the filter criteria. 4) Preview Selection Enable image preview. 5) Preview Area If you check the preview option, the graphics in the selected file will be displayed. 6) Optimization Options After importing the graphic, it will be automatically optimized based on the options and parameters entered. 7) File Filtering You can select file types to filter by criteria. 8) Open and Cancel buttons Click to open and import the selected graphic into the interface; click cancel to cancel 18

XC3000 T2.0 Series Laser Cutting System User Manual the import operation .

1.2.4 Process Setup • After importing the graphics, you may need to use some of the functions in the "Process Settings" section of the frequently used menu bar. The functions are as follows: Lead wires are added to prevent workpieces from becoming incomplete due to factors such as laser perforation. Starting point: Sets the starting position for graphic processing. Micro-connection: Insert small segments into the graphic without cutting them to prevent cut parts from falling off. Compensation: Used for cutting gap compensation. Reverse: Sets the direction of graphic processing (clockwise or counterclockwise). Cooling points: Used to protect the integrity of the corners of the workpiece. • Switch processing layers in the graphics. 1) Select the graphic whose processing layer needs to be switched. 2) There is a process panel on the right side of the drawing area. Click the corresponding layer button to switch the graphic to the processing layer. You can distinguish the processing layer by looking at the graphic color in the drawing area. Parameters " button on the software interface , set the process parameters for the current machining graphic, and then click " OK ," as shown in the following figure:

XC3000 T2.0 Series Laser Cutting System User Manual

Parameters " button on the software interface to enter the process parameter settings page. 2) Select the processing plate and material thickness. 3) Set the cutting process for the current processing graphic. 4) Click "OK" after setting. (If you want to save the current layer's process parameters, you can use the "Export" function to save the current layer's process parameters. Later, you can import the layer's process parameters, select the material thickness, and click "OK" .)

1.2.5 Toolpath Planning This step allows you to sort the processed graphics. Clicking the "+" button under Common

or Drawing will automatically sort the graphics. Clicking the "+

" drop-down button for sorting

will bring up a drop-down menu displaying various sorting methods. Select the sorting method according to your needs, as shown in the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

You can also group the graphics to be processed. Select the graphics that need to be grouped,

and click the "

" button under Common or Drawing. The selected graphics will become a

whole, and the processing order will be fixed. Re-sorting later will not affect the processing order within the group .

1.2.7 Pre-processing inspection After the machining drawings are sorted, the machining trajectory can be checked. Under CNC

page breaks , or by clicking the "

" button in the control panel, you will see the machining

drawings being simulated in the drawing display area. Under CNC page breaks , the simulation speed can be adjusted in the simulation column . You can use the simulation to check if the machining drawings are sorted correctly,

etc.

1.2.8 Actual Processing Please note that this machine tool will actually move; please operate it with caution! 1) Machining preparation: Click

the button in the lower left corner of the axis movement

direction keys in the console area. The drawing to be processed will be gathered in the drawing area. Check whether the actual machining drawing corresponds to the workpiece on the machine tool. The drawing shows the position of the cutting head, which corresponds to the actual position of the cutting head and the machining material, providing a better understanding of the machining position relationship. Frequently used icons are displayed in the software's drawing display area, 21

XC3000 T2.0 Series Laser Cutting System User Manual as shown in the following figure:

After verifying that the previous steps were correct, click the " " button in the console . The

cutting head will then

move around the outermost edge of the graphic

to be processed , allowing you to check the actual processing position or for any obstacles. Once everything is in order, click the " " button again. The cutting head will then move along the trajectory of the graphic to be processed without any light or air output, allowing for better inspection of any abnormalities.

After a smooth, uninterrupted run, click the "

" button to initiate actual

machining with the cutting head emitting light and air. During machining, clicking the "

" button will pause automatic machining, allowing manual control of the cutting

XC3000 T2.0 Series Laser Cutting System User Manual

head's raising and lowering, as well as air blowing. Alternatively, clicking the "

or "

" button will move the cutting head forward or backward along the machining

path. Clicking the "

Clicking

" button will resume machining along the unfinished contour.

the " " button will stop the machine. If machining stops before the

workpiece is finished, and no new cycle or change in shape has begun, clicking the "

" button will move the cutting head to another location. Clicking the "

" button will move the cutting head back to the previously stopped position to continue machining .

1.3 Commonly Used Menus 1.3.1 Selection The software offers a variety of graphic selection methods. The most basic operation is "point selection," where you click on the outline of a graphic to select it. Another common method is "box selection," where you hold down the left mouse button and drag the mouse to create a semi-transparent selection box on the screen to select the graphic. Box selection has two variations: dragging the mouse from left to right selects only graphics completely covered by the selection box; dragging the mouse from right to left selects any graphic as long as any part of it is within the rectangle. Using both selection methods flexibly will make the process more convenient. Under the frequently used tabs, click the "Select" button to bring up a drop-down menu, which allows for more advanced selection operations, as shown in the image below: 23

XC3000 T2.0 Series Laser Cutting System User Manual

1) Select All: Select all graphics in the current drawing. 2) Invert selection: For example, if a selected graphic is clicked, the graphic will become unselected. 3) Deselect: If the graphic is currently selected, clicking Deselect will make the graphic unselected. 4) Disable fast dragging: When this function is checked, the selected graphic in the current drawing area cannot be dragged. 5) Select Unclosed Shapes: Click "Select Unclosed Shapes," and the unclosed shapes in the drawing area will be selected, as shown in the following figure:

XC3000 T2.0 Series Laser Cutting System User Manual

6) Select similar shapes: Select all similar shapes in the current drawing. The steps are as follows: a. Select a target shape (the image below uses a square and a circle as examples). b. Click "Select Similar Images" c. All squares and circles of the same size in the drawing are selected.

XC3000 T2.0 Series Laser Cutting System User Manual

7) Select identical shapes (same angle): Select all identical shapes in the current drawing. The steps are as follows: a. Select a target shape (the image below uses a square and a circle as examples): b. Click "Select Same Shape" c . All squares and circles of the same angle and size in the drawing are selected.

XC3000 T2.0 Series Laser Cutting System User Manual

8) Select all external models: Select all external models in the current drawing. The steps are as follows: Click "Select All External Models" to select all external models currently in the drawing. See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

9) Select all inner membranes: Select the inner contours in the current drawing, as follows: Click "Select All Inner Membranes" to select all inner membrane graphics in the current drawing. See the image below:

Tip: Inner and outer contours: The software distinguishes between inner and outer contours by their enclosure relationship. The outermost layer is the outer contour, the next layer is the inner contour, the inner contour is the next layer of the outer contour, and so on. Unclosed 28

XC3000 T2.0 Series Laser Cutting System User Manual shapes cannot form a layer. 10) Select Layers: Select all layers in the current drawing. The steps are as follows: Click "Select Large Outline Layer" to select the large outline layer in the current drawing. Selecting other layers is similar. 11) Select all circles: To select all circles in the current drawing, follow these steps: Click "Select All Circles" to select all circles currently in the drawing. 12) Copy: Copy the graphic, the steps are as follows: Select the graphic you want to copy in the current drawing, click "Copy", drag the mouse in the drawing, and click once to copy the selected graphic. 13) Delete: Delete the graphic, the steps are as follows: Select the graphic you want to delete in the current drawing and click "Delete". The selected graphic will be cleared from the drawing .

1.3.2 Display Click the "Show" button under the frequently used tabs to bring up a drop-down menu, as shown in the image below:

1) Red Display of Unclosed Shapes: Clicking "Red Display of Unclosed Shapes" will turn the 29

XC3000 T2.0 Series Laser Cutting System User Manual color of unclosed shapes in the current drawing red. 2) Display serial number: Click "Display serial number" and the process number will be displayed in the current drawing. 3) Display the starting point of the path: Click "Display the starting point of the path", and the current drawing will display the starting point of the machining process. 4) Display processing path: Click "Display processing path" and the processing direction will be displayed in the outline of the graphic in the current drawing. 5) Show empty movement path: Click "Show empty movement path" to display the empty movement path between the end point of one graphic and the starting point of the next graphic during the processing. 6) Show Micro-connection Markers: Click "Show Micro-connection Markers." Graphics in the current drawing that have used micro-connections will be clearly marked. After enabling the display function, it will look like the image below :

XC3000 T2.0 Series Laser Cutting System User Manual

1.3.3 NC Code Clicking this button will bring up a pop-up interface where you can view the current cutting graphic, NC code, and machining parameters. See the image below :

1.3.4 Dimensions Select the graphic, and in the geometric transformation interface, click the small triangle under the "Size" button to open a drop-down menu that provides options to perform certain size changes on the selected graphic. See the image below: 31

XC3000 T2.0 Series Laser Cutting System User Manual

Select the graphic. If you want to enter precise dimensions, simply click the "Dimension" button. A pop-up window will appear. Enter the new dimensions and click "OK" to complete the dimension modification.

1) When the lock state in the interface is

At this time, the length and width change

according to the original image size ratio. If you want to set the length and width separately, click 32

XC3000 T2.0 Series Laser Cutting System User Manual the button to unlock the state and enter the desired size. 2 ) Common Sizes : Select the desired percentage to scale the graphic proportionally. 3 ) Zoom Center : The reference point for zooming , and its positional relationship with the original image after zooming.

1.3.5 Geometric Transformations Click the "Geometric Transformations" button under the "Frequently Used" tab to bring up a drop-down menu, as shown in the image below:

1) Translation: Select the graphic that needs to be translated, click "Translate", click the translation base point in the drawing area, drag the mouse to translate the graphic to a certain position, and click again in the drawing area to complete the translation. 2 ) Alignment: Select the graphic that needs to be aligned, click "Align", and an expansion 33

XC3000 T2.0 Series Laser Cutting System User Manual bar will pop up with various alignment options. Click "Alignment" to complete the alignment. 3 ) Horizontal Mirror: Select the graphic you want to mirror and click "Horizontal Mirror" to complete the mirroring. 4 ) Vertical Mirror: Select the graphic you want to mirror and click "Vertical Mirror" to complete the mirroring. 5 ) Mirror at any angle: Select the graphic you want to mirror, click "Mirror at any angle," click once in the drawing area to obtain the mirror base point, then drag the mouse to a desired location and click once to complete the mirroring. See the image below:

6 ) Rotate 45 ° counterclockwise: Select the graphic you want to rotate, and click "Rotate 45 ° counterclockwise" to complete the rotation. 7 ) Rotate 45 ° clockwise: Select the graphic you want to rotate, and click "Rotate 45 ° clockwise" to complete the rotation. 8 ) Rotate 90° counterclockwise: Select the graphic you want to rotate and click "Rotate 90° counterclockwise" to complete the rotation. 9 ) Rotate 90° clockwise: Select the graphic you want to rotate and click "Rotate 90° clockwise" to complete the rotation. 10 ) Rotate 180°: Select the graphic you want to rotate and click "Rotate 180°" to complete the rotation. 11 ) Rotate at any angle: Select the graphic you want to rotate, click "Rotate at any angle," click once in the drawing area to obtain the rotation base point, then drag the mouse to rotate the graphic by a certain angle, and click once to complete the mirroring. See the image below :

XC3000 T2.0 Series Laser Cutting System User Manual

1.3.6 Lead wire Add leader lines to the selected shape, supporting three types: straight line, arc, and straight line + arc. It also supports three lead-in methods: start point lead-in , long side lead-in , and start point lead-in . You can choose whether to add leader lines to unclosed outlines and whether to check for intersections after adding them. See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

1) Check the lead-in and lead-out: When the lead-in intersects with the cutting contour (lead-in is too long), the lead-in length will be reduced to avoid the lead-in from damaging the contour. 2) Distinguishing between inner and outer contours: The software distinguishes between inner and outer contours by the enclosure relationship. The outermost layer is the outer contour, the next layer is the inner contour, the inner contour is the next layer is the outer contour, and so on. Unclosed layers cannot form a single layer. 36

XC3000 T2.0 Series Laser Cutting System User Manual 1.3.7 Clear Click the "Clear" button under the "Frequently Used" tab. A drop-down menu will appear. Select the graphic, and then click the "Clear" option in the drop-down menu to clear the functions used by the graphic. See the image below:

1.3.8 Starting Point Set the starting point of the processing graphic Click the "Start" button on the " Common " tab to bring up a drop-down menu. The starting point is divided into manual starting point and automatic starting point. 1) Manual starting point: Click "Manual Starting Point," then click the graphic outline to complete the manual starting point operation. See the image below:

2) Automatic Start Point: Select the graphic whose machining start point needs to be modified, 37

XC3000 T2.0 Series Laser Cutting System User Manual click "Automatic Start Point," and a dialog box for modifying the start point parameters will pop up. After setting the modified start point, click "OK" in the dialog box. The automatic start point setting is now complete, as shown in the figure below:

1.3.9 Dock When setting the relative position of the cutting head and the graphic, it is recommended to select the bottom left corner. Click the "Dock" button under the "Common" tab. A parameter dialog box will pop up. After setting the parameters, click "OK" in the dialog box to complete the modification of the dock point. (Note: To enable docking, select "Dock" in the configuration tools - advanced section.) See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

1.3.10 Compensation By scaling the graphic, the impact of the kerf on the accuracy of the cut parts can be compensated; for sharp corners, sharp corners and rounded corners can be selected, and the compensation method can be selected as outward expansion and inward contraction, full outward expansion, or full inward contraction. Select the graphic that needs compensation, click the "Compensate" button on the Common tab, a parameter dialog box will pop up. After setting the parameters, click "OK" to compensate the selected graphic. See the image below.

XC3000 T2.0 Series Laser Cutting System User Manual

1) Compensation parameters Outward expansion distance: The dimension value that increases equidistantly outward. Inward shrinkage distance: The dimension value that is reduced inward by equal distance. Sharp corner treatment: You can choose to use sharp corners or rounded corners to treat the corners. 2) Common Configurations Compensation can be quickly applied by selecting the material and thickness and reading the settings in the compensation library. The default parameters can be changed by selecting the material and thickness and then entering the compensation library. 3) Compensation methods: You can choose to expand outward and shrink inward, expand outward completely, or shrink inward completely.

1.3.11 Yangqie An eccentric cut involves adding a leader line from outside the outline. Select the graphic with the added leader, and click the "External Lead" button. The added 40

XC3000 T2.0 Series Laser Cutting System User Manual leader will then become an external leader. See the image below:

1.3.12 Incision A shading technique involves adding a leader line from inside the outline. Select the graphic with the added leader, and click the "Internal Cut" button. The added leader will then become an internal leader. See the image below:

1.3.14 Circumferential Cutting Add ring cuts or cooling points to the graphic. Select the graphic to which you want to add the loop cut, click the "Loop Cut" button under 41

XC3000 T2.0 Series Laser Cutting System User Manual the "Common" tab, a parameter dialog box will pop up. After setting the loop cut parameters, click "OK" in the dialog box to complete adding the loop cut to the graphic. See the image below:

Protection point type: Select the ring-cut type, and you can choose the outer wrap. Maximum included angle: No external wrapping process will be added to corners with an angle greater than this. Outer wrapping type: You can choose between an arc or a triangle for the outer wrapping contour. Outer wrap length: Sets the circumference of the outer wrap profile. Shortest side length: Sets the shortest side length of the outer contour. The image below shows a graphic with a circumferential cut added:

XC3000 T2.0 Series Laser Cutting System User Manual 1.3.15 Micro-connection The cutting workpiece is equipped with a micro-connection to prevent it from falling off after cutting. The micro-connection is divided into " manual micro-connection " and " automatic micro-connection " . 1) Manual micro-connection Select the desired micro-link graphic, click the "Micro-link" button in the Common tab, and a dialog box for setting up a manual micro-link will pop up. After setting it up, click "OK" in the dialog box, and then click the graphic outline to complete the micro-link setting. See the image below:

2) Automatic micro-connection Select the graphic you want to micro-connect, click the drop-down button to the right of the micro-connect option, find "Auto Micro-connect" in the drop-down menu and click it. An Auto Micro-connect parameter dialog box will pop up. After setting the parameters, click "OK" in the dialog box. The automatic micro-connect setting for the selected graphic is now complete. See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

1) Style: Micro-connections by quantity: How many micro-connections to add to each contour. Micro-connections by interval: Add micro-connections to the contour at fixed intervals. 2) Parameters: Micro-connection count: The number of micro-connections per contour. Spacing: The distance between the nearest micro-connectors. Micro-connection size: The length of the micro-connection. 3) Advanced Options: 44

XC3000 T2.0 Series Laser Cutting System User Manual Change the size of the micro-connections of the selected graphic: Modify the size of the micro-connections of the selected graphic to make all the micro-connections of the selected graphic the same size. Start point micro-connection: Whether to add a micro-connection at the starting point. Fly Cut Micro-Connection: Whether to add micro-connections to the fly cut graphic. Add lead wires at micro-connectors: Whether to automatically add lead wires at micro-connectors; if not checked, lead wires can only be added after the micro-connector is exploded. 4) Corner micro-connection avoidance parameters: Enable Micro-Connection Avoidance: Whether to enable the micro-connection avoidance function at corners. Avoidance length: The range within which corners are determined. Maximum angle: The angle from which a corner is determined. Taking the parameters in the above figure as an example: even if the micro-connection conditions are met, micro-connection will not be added within 5mm before and after a corner of less than 180 degrees. 5) Scope: Minimum micro-connection primitive length: Graphics with a perimeter shorter than this length will not have micro-connections added.

1.3.16 Reverse Modify the direction of graphic processing 1) Reverse: If the current processing direction of the graphic is clockwise, select the graphic and click "Reverse". The currently selected graphic will then be changed to a counter-clockwise processing direction. See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

2) Counterclockwise: Set the graphic to be processed in a counterclockwise direction. 3) Clockwise: Set the graphic to be processed in a clockwise direction.

1.3.17 Overcut Set the overcut distance of the selected outline. Select the graphic you want to overcut, click the "Overcut" button under the Common tab, a dialog box will pop up. Set the overcut length, then click "OK" in the dialog box. The overcut setting for the selected graphic is now complete. See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

1.3.18 Release Angle Clicking

the button generates a release angle, which helps in the next bending

process.

XC3000 T2.0 Series Laser Cutting System User Manual

1.3.19 Rounded corners Convert the sharp corners of the graphic into rounded corners. Select the graphic whose corners you want to round, click the "Round Corners" button under the "Common" tab, a dialog box will pop up. Set the round corner radius, then click "OK" in the dialog box. Finally, click on the corner of the graphic to complete the setting. See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual 1.3.20 Cooling Point Adding cooling points helps to lower the temperature of the workpiece during processing, preventing incomplete workpiece production. Cooling points can be manual or automatic. 1) Manual cooling: Click the "Cooling Point" button on the frequently used page, then click the graphic outline to complete the manual cooling settings. See the image below:

2) Automatic cooling point: Select the graphic to which you want to add cooling points, click the drop-down button to the right of the cooling button, and in the pop-up drop-down menu, click "Auto Cooling Point." A dialog box will appear to set the parameters for the auto cooling point. After setting the parameters, click "OK" in the dialog box to complete the auto cooling point setting. See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

Maximum included angle: No cooling point process will be added for corners with an angle greater than this. Introduce point protection: When checked, a cooling point process will be added at the starting point of the graphic. Sharp corner protection: If this option is not checked, the cooling point process will not be added to the corners. Manual Cooling Point: Manually select corners to add cooling points to the graphic. Select the graphic, and click "Clear Cooling Points" in the Cooling Point drop-down menu 50

XC3000 T2.0 Series Laser Cutting System User Manual to clear the cooling points of the selected graphic.

1.3.21 Sorting The order in which the graphics are cut is sorted according to different rules. Select the graphics you want to sort, and click the "Sort" button under the "Common" tab. The software will automatically sort the selected graphics. Alternatively, click the "Sort" dropdown menu to open it. This menu offers various sorting options. Select the graphics you want to sort, and click "Sort by." The selected graphics will then be sorted according to your chosen sorting method. The following image shows the various sorting options:

In the sorting section, there are four manual sorting buttons, which allow you to fine-tune the automatically sorted graphics, as shown in the image below:

First: When you select a graphic from multiple graphics and click this button, the selected graphic will be moved to the first processing position. Finally: If you select one of the multiple graphics and click this button, the selected graphic will be moved to the last one to be processed. Forward: When multiple graphics are selected, clicking this button will move the processing order of the selected graphics forward by one. Backward: When multiple graphics are selected, clicking this button will move the processing order of the selected graphics one position backward. 51

XC3000 T2.0 Series Laser Cutting System User Manual 1.3.22 Array The graphic can be copied quickly, and the array can be divided into two methods: rectangular array and circular array. 1) Rectangular array:

Select the graphic you want to array, click the "Array" button under the "Common" tab, and a rectangular array parameters dialog box will pop up. After setting the parameters, click "OK" in the dialog box to complete the rectangular array setup. The following image shows the rectangular array parameters: • Parameter type: Selectable array by spacing or array by offset • Number of rows/columns: The number of rows and columns in the array • (Row/Column) Spacing/Offset: The spacing/offset of the array. • Up / Down / Left / Right: Direction of the array 2) Ring array:

XC3000 T2.0 Series Laser Cutting System User Manual

Select the graphic that needs to be arrayed, click the array drop-down button, and a drop-down menu will pop up. Click "Circular Array" to open the Circular Array parameter dialog box. After setting the parameters, click "OK" in the dialog box to complete the circular array setup. The following image shows the circular array parameters: • Array mode: Array can be selected by quantity or by interval. • Center of the ring: Optionally specify the radius or customize the stretch specification in the drawing interface. • Starting angle: Array starting angle • Angle range: Array graphics within this angle range

Group 1.3.23 Grouping multiple graphics into a single unit prevents them from shifting relative to each other when dragged. Select multiple graphics, then click the "Group" button under the "Common" tab. The selected graphics will be grouped together. After grouping, the order, position, and layers of the graphics will be fixed, and subsequent sorting, dragging, or other operations on the graphics will not be affected. Click the "drop-down button" of the group to bring up a drop-down menu, as shown in 53

XC3000 T2.0 Series Laser Cutting System User Manual the image below:

• Select All Groups: Selects all groups of graphics in the current drawing. • Ungroup selected graphics: Select a group of graphics, click the "Ungroup selected graphics" button, and the selected graphics will be ungrouped. • Break all groups: Clicking the "Break all groups" button will cancel all group graphics in the current drawing. • Explode Shape: Select the shape, click "Explode Shape", and the selected shape will be broken down into the smallest line segments (arcs or line segments).

1.3.24 Flying Cut Set the selected graphic as the flight cutting path and layer. The following image shows the flight cutting parameter dialog box:

XC3000 T2.0 Series Laser Cutting System User Manual

1) Flight type: • Flight Circle: Select this option for circular flight path planning. • Flight path: Select this option for rectangular and polygonal path planning. • Radar: A flight path without a smooth arc. 2) Sorting method: The sorting method of the flying cut graphics. Different options will result in different flying cut path planning. 3) Starting point position: Select the starting point position of the flying cut graphic. 4) Allowable deviation: If the horizontal/vertical distance of the starting point of the contour is less than this value, these contours will be planned as one row/column; if it is greater than this value, they will be planned as multiple rows/columns. 5) Smoothing the furthest distance: If the distance between two contours is less than this value, an arc tangent to the next flying cut path will be automatically added before entering the contour to reduce speed loss and improve processing efficiency. 6) Smooth arc radius: The radius of the arc mentioned above. 7) No tilting between flying cutting groups: Whether the Z-axis tilts up in the air movement 55

XC3000 T2.0 Series Laser Cutting System User Manual path between two flying cutting groups. 8) Pre-lighting distance: Pre-lighting allows for better workpiece detachment. 9) Delayed shut-off distance: Delayed shut-off can be understood as overcut distance, which facilitates better workpiece removal.

1.3.25 Shared Edge Combining workpieces with the same boundary together, sharing a single edge, can reduce material waste and improve processing efficiency. Select the multiple graphics that need to share an edge, click the "Share Edge" button under the "Common" tab, and a parameter dialog box will pop up. Here you can set whether to use a C-type or regular edge sharing mechanism, and the sorting method. After setting the parameters, click "OK" in the dialog box to complete the edge sharing process. After edge sharing, the graphics will be grouped into a single outline to avoid sorting errors. The following image shows the result after edge sharing:

1.3.26 Bridging After setting the maximum distance between adjacent curves and the bridging width, you can add a bridge to the selected contour. Select the graphic that needs bridging, click the "Bridge" button under the Common tab, and according to the log prompts, click twice in the drawing to display the bridging line. A bridging parameter dialog box will pop up. After setting, click "OK" in the dialog box to complete the setting. 56

XC3000 T2.0 Series Laser Cutting System User Manual

Bridging parameters: • Maximum distance between adjacent curves: Adds a bridge to curves on the bridging path that are less than this distance. • Bridge width: The width of the bridge.

1.3.27 Measurement Measure the distance between two points. Click the "Measurement" button under the Common tab. Following the log prompts, click the measurement start point and test end point in the plotting area. The measurement results log will then be displayed, as shown in the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

1.3.27 Optimization Optimize the graphics Click the "Optimize" button under the frequently used pagination to bring up a drop-down menu with various optimization options, as shown in the image below:

XC3000 T2.0 Series Laser Cutting System User Manual 1) Curve Smoothing: Select the multiple line segments that need optimization, click the "Curve Optimization" button, a dialog box will pop up to set the smoothing precision, and after setting, click "OK" in the dialog box. The software will then optimize the multiple line segments. See the image below:

2) Curve Break: Click the "Curve Break" button, then click on the outline of the graphic. The curve will be broken at the clicked point. The curve breaking process is continuous and can be canceled by pressing ESC. See the image below:

3) Remove duplicate lines: In some graphics, what appears to be a single line may appear as two lines when magnified. Select the graphic, click the "Remove Duplicate Lines" button, and a dialog box will appear. Set the deletion tolerance distance (if the maximum distance between two contours is less than this value, the software will determine that these two contours are duplicate lines). After setting, click "OK" in the dialog box to complete the optimization. See the image below:

4) Remove small graphics: In the imported graphics, there may be graphics that are difficult to detect visually. The size of the graphics is very small or they may be moved to an abnormal position during processing. Click the "Remove Small Graphics" button, and a dialog box will pop 59

XC3000 T2.0 Series Laser Cutting System User Manual up to set the outline size. After setting, click "OK" in the dialog box. If the outline size of the graphic in the drawing is smaller than the outline size of the small graphics to be removed, it will be cleared. 5) Merge Connecting Lines: Often, drawings will appear visually connected but are not actually linked. Click the "Merge Connecting Lines" button. A dialog box will pop up; set the merge tolerance distance (the distance between the nearest breakpoints of the two contours must be within this range for the merge operation to be performed). After setting, click "OK" in the dialog box to complete the merge. See the image below:

1.4 Drawing When drawing a graphic, the log area in the drawing interface will provide prompts for the next step, and the user can complete the drawing by following the prompts in the log area.

1.4.1 Straight Line Click the "Line" button under the drawing tab. According to the log prompts, click the starting point and the next point once in the drawing area to complete the line drawing. You can also click the next point continuously to draw multiple lines. The end point of the current line will become the starting point of the next line. Press Enter to end the drawing.

1.4.2 Rectangle Click the "Rectangle" button under the Drawing tab. Following the log prompts, click once in the drawing area to get the first corner point, then click again in a different location to get the other corner point. The rectangle is now drawn. Click the rectangle drop-down button to bring up a drop-down menu containing options for rectangle, rounded rectangle, and racetrack. Click on the rounded rectangle or racetrack shape to draw, following the log prompts. You can also input fixed dimensions when drawing. Left-click to specify the first corner point, press the D key, then press the number keys to confirm the rectangle's width and height (separated by commas). Finally, press Enter to complete the drawing. Example: D50,100 means the width is 60

XC3000 T2.0 Series Laser Cutting System User Manual 50 and the height is 100.

1.4.3 Circle Click the drop-down button for the circle under the drawing tab to bring up the drop-down menu, which includes options for drawing a full circle, a three-point arc, an arc during scanning, and a new ellipse. • Complete Circle: Click the "Complete Circle" button, first left-click to determine the center position, then enter the radius using the keyboard, and finally press the Enter key to complete the drawing. • Three-point arc: Click the "Three-point arc" button, and then click three different points in the drawing area to complete the drawing. • Scan Arc: Click the “Scan Arc” button, click the mouse to determine the center position, click the position to determine the radius, and then drag the mouse and click to determine the size of the arc. • New Ellipse: Click the "New Ellipse" button. In the drawing area, first click to confirm the center point of the ellipse, then drag the mouse to click to confirm a vertex of the minor axis, and then drag the mouse to confirm the vertex of the major axis. The drawing is now complete. We recommend that customers use a full circle to draw the circle.

1.4.4 Multisegments Click the "drop-down button" under the polyline tab in the drawing page to bring up the drop-down menu, which contains polylines, polygons, and stars that can be drawn. • Polysegment: Click the "Polysegment" button, click once in the drawing area to get the starting point, drag the mouse and click again, and continue clicking the next point to draw a polysegment shape. By default, the drawing process is a straight line. You can press the A key on the keyboard to switch to an arc. After switching to an arc, you can press the L key on the keyboard to switch to a straight line. Pressing the C key on the keyboard will close the outline into a closed outline according to the currently selected line type. Finally, press the Enter key on the keyboard to complete the drawing. • Polygon: Click the "Polygon" button to bring up a dialog box. Set the number of sides of the polygon and choose whether it is inscribed or circumscribed in a circle. After setting, click "OK" in the dialog box. In the drawing area, click to specify the center point of the polygon, and then drag the mouse to specify the radius of the polygon to draw it. 61

XC3000 T2.0 Series Laser Cutting System User Manual • Star shape: There are two ways to draw a star shape. 1) Fill in the number of fixed points, the distance between the star's center and vertices, the star's side length, and the rotation angle. The software will draw a star based on the information entered. Simply click on the center of the star in the drawing area to draw the star. 2) Only fill in the number of vertices; leave other information blank. Specify the star's center, outer vertices, and inner vertices on the interface. Draw the star using these three points. The angle can be rotated freely. See the image below:

1.4.5 Single point Click the "Single Point" button under the drawing tab, then click the desired point in the drawing area to complete the drawing.

1.4.6 Text Click the "Text" button under the Drawing tab to bring up the Text Parameters dialog box. Set the font, font size, text type, and choose between hollow text or single line text. After setting, click "OK" in the dialog box. Then, click once in the drawing area to complete the text graphic.

XC3000 T2.0 Series Laser Cutting System User Manual 1.4.7 Cutting Click the "Crop" button under the Drawing tab, then click the outline of the graphic in the drawing area. The outline on the clicked graphic will be cleared.

1.4.8 Extension Click the "Extend" button, then click a line in the drawing area to extend the line until it intersects with another graphic outline. The extension will then end.

Group 1.4.9 The operation is the same as the group under the common pagination. For detailed steps, please refer to section 2.1.22.

1.4.10 Sorting and Alignment The sorting operation is the same as the sorting under common pagination. For detailed steps, please refer to section 2.1.20. Under the Drawing tab, the Alignment and Order columns offer various alignment options. Select the graphics you want to align, and click the alignment option to adjust the alignment. The image below shows the alignment buttons:

1.4.11 Optimization The operation is the same as the optimization under common pagination. For detailed steps, please refer to section 2.1.27.

1.5 nesting This software is equipped with an automatic material feeding function. This section will introduce 63

XC3000 T2.0 Series Laser Cutting System User Manual its usage in detail so that readers can better use the software and improve processing efficiency. Open the nesting software and select to import a graphic or draw one. The image below shows an example of a rectangle drawn as an example.

XC3000 T2.0 Series Laser Cutting System User Manual 1.5.1 Parts Before nesting, the drawing needs to be converted into a cut part. A part consists of an outer contour and an inner contour (the inner contour is not mandatory). Parts can be added by selecting the drawing and right-clicking to add it to the parts library, or by right-clicking to import parts in the left sidebar. Set selected graphic as part: To set the selected graphic as a part, the customer needs to set the number of parts and the sorting method within the parts in the pop-up window; if you check the box to group the selected graphics into a workpiece, the selected graphics will be grouped into a part .

XC3000 T2.0 Series Laser Cutting System User Manual

1.5.2 Nesting Column Once there are parts in the drawing panel, a nesting bar will appear on the left side of the drawing area. You can also set the material of the parts in the nesting bar. 1) The quick operation bar allows for rapid selection, deletion, and arrangement of parts/sheet materials. 2) The parts panel displays all added parts.

XC3000 T2.0 Series Laser Cutting System User Manual 1.5.3 Layout Parameters After clicking, you can set layout-related parameters in the pop-up window: 1) Board Size: You can set the size and quantity of the boards here. 2) Setting parameters: The spacing between parts and the spacing between parts and the edge of the sheet metal can be set. 3) Automatic sorting: The sorting method for parts and the orientation of parts placed on the sheet metal during material layout can be set. 4 ) Part parameters: Which graphics are involved in the layout? 5 ) Clear previous sorting results: Whether to continue sorting based on previous sorting results. 6 ) Advanced parameters: Open the advanced parameters interface to set advanced parameters:

XC3000 T2.0 Series Laser Cutting System User Manual

1.5.4 Advanced Parameters a) Nesting Start Point: Set the starting point position for nesting. b) Nesting direction: Set the priority of the nesting direction c) Rotation angle: The angle to try each time when placing the part (the smaller the angle, the better the effect, but the slower the nesting speed). d) Nesting accuracy: The smaller the value, the better the nesting effect, but the slower the nesting speed. e) Nesting within Holes: If the scrap area within the holes of other parts can accommodate a certain part, decide whether to place the part inside the hole. Selecting this option will increase 68

XC3000 T2.0 Series Laser Cutting System User Manual material utilization and reduce material unloading speed. f ) Mirroring: Whether to allow graphic mirroring to achieve higher board utilization. g ) Shared-side layout: Whether to enable the shared-side layout function h ) Layout strategy: Grid layout uses a standard row-and-column arrangement , while compact layout uses gaps in the layout .

1.5.5 Sheet metal Right-click to select different deletion methods. Delete: Delete the currently selected graphic. Delete selected graphics: Deletes the currently selected graphics. Delete all results: After deleting all boards from the board list, normal processing can proceed.

XC3000 T2.0 Series Laser Cutting System User Manual

II. Introduction to Process Interface Clicking the "Process" button in the Process panel will bring up the process parameter settings interface. This interface contains almost all the parameters required for cutting, and provides a total of 8 layers: 7 processing layers and 1 unprocessed graphic. The process parameters for each processing layer are independent.

XC3000 T2.0 Series Laser Cutting System User Manual

2.1 Common Process Interface

1. Process Number 2. Layers 3. Processing type 4. Cutting process 5. Other parameters 6. Power control curve 7. Cutting parameters, perforation parameters , advanced parameters, and blade retraction parameters 8. Remarks 9. Import/Export 10. Material Library Configuration 11. Save, Cancel, Apply 71

XC3000 T2.0 Series Laser Cutting System User Manual

2.2 Process Tree This software uses a tree structure storage technology, which allows all cutting parameters to be added to the tree diagram on the left, making it convenient for users to view and call the parameters. After selecting any material in the process panel, right-clicking will bring up a pop-up window for adding material/thickness parameters. Users can add the corresponding material and thickness under the selected material in the pop-up window, as shown in the image below, which uses brass as an example:

After adding brass, a thickness needs to be added under the brass material:

2.3 Layers This software provides 7 processing layers, each of which can be configured individually. In the drawing process, select the graphic and click the corresponding layer button on the right; the processing technology for that graphic will then be applied to the selected layer. See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

2.4 Processing Type Processing type Evaporation and

When this function is selected, the process will first perform a film film removal cut along the cutting trajectory using the film parameters,

removal

and then proceed with normal processing according to the layer parameters. Selecting this option will bring up the film removal process parameter settings page.

Pre-piercing

When this function is selected, holes will be pre-drilled at the starting point of the graphic (or the starting point of the leader line) before the actual trajectory cutting. This software provides automatic grouping pre-drilling, which can be enabled in the global parameters.

Processing

Standard or fixed-height cutting, where fixed-height cutting refers

type

to cutting at a certain height by the cutting head.

XC3000 T2.0 Series Laser Cutting System User Manual

2.5 Cutting Parameters Cutting parameters Cutting height

Set the height of the laser head from the material during cutting.

Cutting speed

Set the cutting command speed.

Cutting power

Set the peak output power of the laser during cutting.

Cutting

The laser emission frequency is set during cutting, which is the

frequency

number of times light is emitted per second. The higher the value, the more continuous the light emission. 5000Hz can be considered as continuous light.

Duty cycle

The laser output duty cycle is set during cutting, which is the ratio of the output time to the total time in one output cycle. The larger the value, the higher the average output power. 100% can be considered as the average power equal to the peak power.

Cutting

air Set the pressure of the auxiliary gas during cutting.

pressure Cutting gas

Set the type of auxiliary gas used during cutting; air, oxygen, and nitrogen are three options.

Duration of stay Set a delay at the starting point of graphic processing to allow for more thorough cutting.

2.6 Other parameters Other parameters Start the knife

Whether to enable the slow start-up function.

distance

The effective range of slow-speed cuts (calculated from the starting point of the outline, including the lead line) prevents the blade from failing to penetrate when initially cutting thick plates.

speed

Set slow start speed

Enable

blade Enable perfect sheathing.

sheathing distance

Set the distance from the perfect cut end to the cut endpoint.

speed

Set the cutting speed for perfect finish. 74

XC3000 T2.0 Series Laser Cutting System User Manual Duty cycle

Set the duty cycle of the laser beam during the retraction phase.

frequency

Set the frequency of laser light emission when the blade is retracted.

Turn

off

lights

the Define the distance from the end of the cut to the point where the in light is turned off.

advance Control method Set the tool retraction control method.

2.7 Power Curve The laser energy output curve can be enabled by selecting the corresponding checkboxes: There are two power-speed curves: duty cycle and frequency. Users can select and enable any combination. It is recommended to enable only the duty cycle curve, as the effect is more noticeable and easier to adjust.

Click the "Curve Edit" button to enter the curve editing interface for editing:

XC3000 T2.0 Series Laser Cutting System User Manual

This software uses a spline curve fitting method for power control curves, with speed on the horizontal axis and laser output on the vertical axis, providing high smoothness. Users can select from three curve editing interfaces on the top tab. Taking the above image as an example: when the speed is 0%, the duty cycle is 50%; when the speed is 20%~30%, the duty cycle is 60%; when the speed is 60%, the duty cycle is 90%; and when the speed is 90%, the duty cycle is 100%. For example, in a machining process, the duty cycle is 100% when the cutting speed is 10m/min; 60% when the cutting speed is 2~3m/min; and 100% when the cutting speed is 9~10m/min. The software's default power curves can meet most common machining needs, so customers can make minor adjustments based on the default curves.

XC3000 T2.0 Series Laser Cutting System User Manual

2.8 perforation Perforation parameters Seamless

Selecting "Hard-see-through piercing" will enable the piercing

piercing

feature. Puncture height: Set the height of the non-invasive puncture nozzle from the board. Puncture time: Set the time for painless puncture . Puncture Focus: Set the focus for a painless puncture . Laser adjustment : Check the box to enable the light output parameters for non-intrusive perforation. Power: Sets the laser power for non-intrusive piercing . Duty cycle: Sets the laser duty cycle for non-intrusive perforation . Frequency: Sets the frequency for non-invisible piercing .

Perforation

sequentially from level 5 to level 1, and cannot skip levels. The

grade

perforation order is: level 5 - level 4 - level 3 - level 2 - level 1.

Perforation

Segmented perforation: During perforation, the height of the cutting

type

head from the board remains unchanged. Progressive piercing: During piercing, the cutting head height will move at a constant speed to the next piercing height. Lightning-fast perforation: During perforation, the height of the cutting head from the board remains constant, and the frequency and duty cycle can be set to change at a uniform speed.

Perforation time Set the piercing time. Perforation

The height of the nozzle from the board during perforation.

height Perforated gas

The type of auxiliary gas for perforation can be set, with options for air, oxygen, and nitrogen.

Perforation

Set the pressure of the auxiliary gas during perforation.

pressure Side

blow The outlet pressure of the cooling gas from the nozzle during

pressure

piercing.

Perforation

Set the peak output power of the perforated laser. 77

XC3000 T2.0 Series Laser Cutting System User Manual power Perforation

Set the light emission frequency through the perforation .

frequency Duty cycle

The laser output duty cycle is set during perforation, which is the ratio of the output time to the total time in one output cycle. The larger the value, the higher the average output power. 100% can be considered as the average power equal to the peak power.

Starting

point Set the focus position when you start drilling.

focus Stop the light After perforation, the time spent blowing air without producing light and

blow

air is used to cool the board.

(milliseconds) Stop the light The type of auxiliary gas for perforation can be set, with options and blow air Stop

for air, oxygen, and nitrogen.

blowing Set a time limit after perforation to allow only air to escape, cooling

air (bar)

the board and reducing the impact of overheating on subsequent processing.

2.9 Advanced Parameters Click "Advanced," the perforation parameters will be hidden, and the following page will be displayed:

XC3000 T2.0 Series Laser Cutting System User Manual

Advanced parameters Vibration

When cutting thick plates, slag may remain on the plate after

Suppression

piercing, so vibration suppression needs to be activated to improve the cutting effect.

Inhibition type

It is divided into thin plate suppression and thick plate suppression, and the choice should be made according to the actual plate material .

Suppression

The higher the level, the slower the response.

level Seamless

Seamless micro-connection start/stop switch, without cutting

Micro-connection through at the micro-connection point during thick plate processing. stub percentage

Set the percentage to retain after cutting. 79

XC3000 T2.0 Series Laser Cutting System User Manual Start-up

lead Enable lead wire process

wire process Lead parameters Cutting speed: Sets the cutting speed of the graphic leader. Duty cycle: Sets the laser output duty cycle when cutting patterned leads. Frequency: Sets the laser emission frequency during pattern lead cutting. Lead

wire Enable lead wire slow descent?

descent Lead

wire Lead height: Sets the height for lead wire cutting.

descent

Stable distance: The lead wire height gradually decreases to the stable height of the cutting plate, and the lead wire is set to the cutting distance of the plate.

Lead wire zoom

Lead wire zoom: Whether to enable lead wire zoom. Focus: Sets the focus position for wire cutting. Starting line segment length: Sets the length of the starting zoom cut of the lead wire.

Lead circle

Lead circle: Whether the lead circle is enabled. Speed: Sets the processing speed of the lead circle. Radius: Sets the radius of the leader circle.

Slag

removal Should the slag removal process be activated?

process activated Cutting height

Set the cutting height of the cutting head from the board when removing slag.

Cutting speed

Set the cutting speed command during slag removal.

Cutting power

Set the peak output power of the laser during slag removal.

Cutting

The laser emission frequency is set during slag removal, which is

frequency

the number of times light is emitted per second. The larger the value, the more continuous the light emission.

Duty cycle

The laser output duty cycle is set during slag removal, which is the ratio of the output time to the total time within one output cycle. The larger the value, the higher the average output power. 100% can be considered as the average power equal to the peak power. 80

XC3000 T2.0 Series Laser Cutting System User Manual Cutting gas

The auxiliary gas for slag removal can be selected from air, oxygen, or nitrogen.

Cutting

air Set the auxiliary gas outlet pressure during slag removal.

pressure Focus position

Set the position of the focus point during slag removal.

Light spot

Set the size of the light-emitting shape of the cutting head during slag removal.

Slag

removal Set the radius for the cutting head when removing slag.

radius Number of slag Set the number of rotations when the cutting head removes slag . removal cycles

2.10 Remarks In the remarks interface, users can enter information to note precautions and other relevant information for the current process, such as nozzle size.

2.11 Import/Export Importing or exporting process parameters for this layer: Please note that this button will only import or export the process parameters for the current process layer. For example, if a customer uses two layers, a large outline and a medium outline, and you click the export button to save the process in the large outline process interface, only the machining process within the large outline will be exported. To save the medium outline process, please go to the medium outline interface, click the export button, and then save it here. Importing is similar and will not be elaborated further here.

XC3000 T2.0 Series Laser Cutting System User Manual

2.12 Global Parameters This mainly includes motion control parameters, default parameters, unit selection, pre-piercing and film removal. Adjusting these parameters will affect the smoothness of machine operation, processing effect and efficiency.

Motion control parameters Parameter name

Default

Remark

parameters Empty movement 3 0

X-axis evacuation speed: The speed at which the

speed

X-axis evacuates between one contour and another during cutting. Y-axis evacuation speed: The speed at which the Y-axis evacuates between one contour and another during cutting.

air displacement 6000

X-axis acceleration during cuts: The acceleration of

acceleration

the X-axis as it moves between contours during cuts. Y-axis acceleration during cutting: The acceleration of the Y-axis when moving between contours during cutting.

Air

shift 1 00

acceleration time

X-axis idle acceleration time: During cutting, the acceleration time of the X-axis when moving from one contour to another. The larger this value is, the slower the acceleration and the smaller the impact on the machine tool; the smaller this value is, the faster the acceleration and the greater the impact on the machine tool. Y-axis idle acceleration time: During cutting, the acceleration time of the Y-axis when moving from one contour to another. The larger this value is, the slower the acceleration and the smaller the impact on the machine tool; the smaller this value is, the faster the acceleration and the greater the impact on the machine tool.

Border speed

Set the border crossing speed. 82

XC3000 T2.0 Series Laser Cutting System User Manual Processing

5,000

acceleration

During cutting, the maximum speed of each axis movement is used in conjunction with the processing speed.

Processing

1 00

acceleration time

The acceleration time during cutting: the larger this value, the slower the acceleration and the less impact on the machine tool; the smaller this value, the faster the acceleration and the greater the impact on the machine tool.

low-pass

filter 20

coefficient

The low-pass filter coefficient affects the smoothness of the motion; the larger the coefficient, the smoother the motion, but the greater the trajectory distortion.

angular

velocity 1

coefficient Circular

Adjust the corner speed coefficient when there are undulating corners, and decrease it.

speed 1

coefficient

The speed coefficient of the circular arc is adjusted when the arc is tangent to a straight line, creating a wave-like effect on the straight line. Alternatively, if the circular arc feels too jarring and you want a smoother motion, adjust it to a lower value.

axis

idle unified

movement

Should the XY axis idle displacement parameters be set uniformly or separately?

settings Default parameters Parameter name

default

Remark

value Air opening delay 2 00

After the gas is turned on, wait for the delay of this value to end before firing the laser.

First

point

of 400

blowing delay

When cutting begins, there is a section of air in the gas pipeline. Therefore, it is necessary to release the gas for a longer period of time before turning on the laser to ensure stable cutting. This value is the control of the extra gas release time.

Early start time

500

Start time before processing begins

ventilation delay

200

When switching to different gases during the cutting 83

XC3000 T2.0 Series Laser Cutting System User Manual process, the gas is released first, and after the delay, the light is released for cutting. Cooling

point 1000

Set the dwell time at the cooling point.

delay Outline

end

air 200

Set the delay between the cut and the end point when

-closing delay

the gas is turned off .

Outline end delay 0

Set the delay before the light turns off at the end of the cut . Gas parameters

Parameter name

default

Remark

value Manual

air 2

Air pressure when manually releasing air

pressure Manual

oxygen 2

Gas pressure when manually dispensing oxygen

nitrogen 2

Gas pressure when manually releasing nitrogen

pressure Manual pressure Turn on protective closure

Enable: This activates the protective gas supply. As

gas

long as the software enable button is turned on, gas

during

processing

will continuously be emitted. Close: Turn off the protective gas.

Protective

gas 0.3

Set the pressure of the protective gas.

pressure During processing,

closure turn

Once activated, the gas should not be shut off during the cutting process to extend the life of the protective

on the constant

lens.

air blowing. Unit selection Parameter name

default value

Remark

unit of length

millimeters

Length unit conversion, selectable millimeter or inch.

Time unit

millisecond

Time unit conversion, selectable milliseconds or 84

XC3000 T2.0 Series Laser Cutting System User Manual seconds. speed unit

meters/minute Speed unit conversion: selectable meters per minute, millimeters per second, inches per minute, inches per second.

acceleration unit

mm/ s^ 2

Acceleration

unit

conversion,

selectable

millimeters/ second^ 2, inches/ second^ 2, G(10 m)/ second^ 2. air pressure unit

BAR

Pressure unit conversion: BAR, PSI, MPa are all available.

power unit

tile (W)

Power unit conversion, selectable watts (W) or percentage (%). advanced

Parameter name

default

Remark

value Enable delay Power

2000

Enable time on machine tools

control 6

Set the system power output delay

system delay Fly-Cut

Control 0

Set the light emission delay during fly-cut.

System Delay Slag

removal Do

power control

not Power curve control during slag removal

check Pre-perforation and membrane removal

Parameter name default

Remark

value Pre-piercing

Grouping

Single trajectory: When checked, processing will use a single trajectory. Whole board: When selected, it will be processed as a whole board. Grouping: When checked, the data will be processed in groups.

removal method

Grouping

Single trajectory: When checked, processing will use a single trajectory. 85

XC3000 T2.0 Series Laser Cutting System User Manual Grouping: After checking the box , remove the membrane by grouping. Whole board: After selecting this option, remove the film from the entire board first. Membrane

Pre-drilling Pre-perforate: When checked, perforate first and then

perforation

remove the film.

sequence

Remove the membrane first: When checked, remove the membrane first and then perforate. Reset Z-axis coordinates

Parameter name

Remark

Reset to the current Z-axis After clicking, the current Z-axis coordinate value is 0. coordinate

2.13 Material Library Configuration Click the "Material Library Configuration" button on the process interface to bring up the material settings dialog box, as shown in the figure below:

XC3000 T2.0 Series Laser Cutting System User Manual

1) The existing materials list can be added with reference to step 7.2. 2) Adding/modifying materials. 3) Save, Delete, and Close buttons. The following example demonstrates adding manganese steel: a) In the material addition and modification section, select "Add New" and fill in the ID and name; note that the ID and name cannot be duplicated with existing materials in the current material list. See the image below:

b. After setting the new material information, click the "Save" button, and then click "Close" when finished. See the image below:

XC3000 T2.0 Series Laser Cutting System User Manual

c. Now, perform the "Add Material" operation in step 3.2 . You will find that manganese steel can be selected in the material drop-down menu, as shown in the figure below. If the customer does not process manganese steel and does not want to see manganese steel in the drop-down menu, they can first delete the manganese steel process in the process tree, then click the "Material Library Configuration" button, select manganese steel in the material list, and then click the "Delete" button below; alternatively, they can change the name of manganese steel to another material in the material modification section. The operation for thickness is the same as for materials and will not be described again.

XC3000 T2.0 Series Laser Cutting System User Manual

2.14 Confirm, Cancel, Apply buttons • Confirm: Save the process parameters set for this layer for the parameters to take effect. • Cancel: Clicking "Cancel" on the currently modified parameters in the layer will disable the modified parameters and close the process parameter setting pop-up window. • Application: Clicking "Apply" on the currently modified parameters in the layer will take effect immediately without closing the process parameter setting pop-up window.

III. Control Panel This chapter mainly introduces the machining control module, located on the right side of the main interface, which mainly includes functions such as coordinate system, manual control, and automatic control.

3.1 Coordinate System All movements during machining are relative to the cutting head and the workpiece. The workpiece zero point

is displayed as a crosshair in the drawing interface. The correspondence

between the machine tool coordinate system and the graphic coordinate system is shown in the following figure:

XC3000 T2.0 Series Laser Cutting System User Manual

Clicking the "Preview" button on the console will display the positional relationship between the graphic and the machine tool sheet on the screen.

The coordinate system used is a right-handed Cartesian coordinate system. As shown in the figure, the direction of the thumb is the positive direction of the X-axis, the index finger is the positive direction of the Y-axis, and the middle finger is the positive direction of the Z-axis. Based on the Z, Y, and Z coordinates, the directions of the three rotating coordinates A, B, and C can be easily determined according to the right-hand screw rule.

XC3000 T2.0 Series Laser Cutting System User Manual 3.1.1 Machine Coordinate System The machine tool coordinate system is uniquely determined by the machine tool structure and parameters. The coordinate system can be established by clicking "Return to Origin". When installing the machine for the first time or when the machine coordinate system deviates due to abnormal reasons, you can click the "Return to Origin" button under the "CNC" tab to re-establish the machine coordinate system.

3.1.2 Program Coordinate System Since the workpiece placement may change, a workpiece coordinate system is needed for ease of use. All program coordinate systems in the software have axes that are completely consistent with the machine tool coordinate system, differing only in their zero points, called the "program zero point." The program coordinate system is divided into a floating coordinate system and a workpiece coordinate system.

The button at the top of the console is used to select the program coordinate system, which can be either "floating coordinate system" or one of the nine "workpiece coordinate systems". A floating coordinate system is generally used for informal processing, where processing can be considered to begin wherever the laser head moves. Its coordinate system zero point is automatically set to the laser head's current position when the user clicks "Follow Border," "Walk Without Moving," or "Process." See below:

XC3000 T2.0 Series Laser Cutting System User Manual

When selecting workpiece coordinate systems 1-9, the workpiece zero point is manually set by the user through "Set Marker Point." Once set, the point is permanently saved until the next time it needs to be set. Therefore, workpiece coordinate systems are suitable for batch production, and their position is generally determined by the fixed fixture. Using workpiece coordinate systems 1-9 ensures that each machining operation is performed in the same position on the machine tool. Click the "

" in the bottom status bar.

You can choose to display mechanical or program coordinates, and you can also set the zero point of both coordinate systems here. Selecting "Current point as program zero point" will position the cutting head at the specified coordinate position.

XC3000 T2.0 Series Laser Cutting System User Manual 3.1.3 Manual Control

Clicking the "Mark Coordinates" button will overwrite the current cutting head position with this marker point.

Click the "Return to Marker Point" button, and the cutting head will move to the coordinates of the marker point.

There are 11 machine tool marker positions in total. Select the corresponding marker point from the drop-down menu.

When the laser shutter pin is connected to the system, click the "Shutter" button to control the laser shutter switch.

When the laser's red light pin is connected to the system, click the "Red Light" button to control the laser's red light switch.

Clicking the "Laser Spotting " button allows you to verify if the laser output is normal. The dropdown menu on the right allows you to set the spotting parameters.

XC3000 T2.0 Series Laser Cutting System User Manual

Click "Follow" to move the cutting head to a distance of 1mm from the material. Click "Follow" again to cancel the following state and automatically perform a Z-axis lifting motion.

Click the "Blow" button to manually start or stop the protective gas.

Click the air button to select air, nitrogen, or oxygen. Use in conjunction with blowing air.

• Fast: When checked, after setting the fast speed, clicking the axis to move will switch to fast motion mode, and the axis movement speed will be based on the speed set in fast mode. • Step: When checked, after setting the step distance, when you click to move the axis, the axis will step once, and the step distance is the set step distance. • Jog Cut: When checked, click and hold the axis movement button. The cutting head will follow 95

XC3000 T2.0 Series Laser Cutting System User Manual and move downwards, starting the light cutting according to the current process. Release the movement button to end the jog cut. The jog cut option will be automatically deselected after each axis movement. Clicking "

" will open the jog cut speed limit and follow-up step interface,

as shown in the figure below:

1) Cutting speed: The maximum speed limit for inching cutting. When the process speed is greater than this speed, it will move at this speed. 2) Cutting step: The sensitivity of the detection when judging the edge of the board. The larger the value, the less sensitive it is and the greater the overshoot distance of the Z-axis; the smaller the value, the more sensitive it is and the greater the probability of mistakenly detecting the undulation of the board as the boundary of the board.

3.1.4 Process Control

XC3000 T2.0 Series Laser Cutting System User Manual

Used to start processing and resume processing after pausing; after clicking the "Start" button, the mode interface displays the automatic - running status.

When the program starts, clicking the "Pause" button will pause the machine tool's automatic machining motion; the mode interface will display the automatic-pause status.

Clicking the " Stop " button will reset the software to its initial ready state, and the software will enter the ready state.

Click the "Follow Border" button, and the cutting head will move along the outer border of the graphic to make a rectangle, which is used by the customer to observe the position of the graphic in the board.

Before processing, simulate the process. Click the "Simulate" button to simulate the processing graphic to ensure that the processing path is normal.

performing a no-load run and actual processing is that the device is not activated, not turned on, and not followed by movement. All other operations are exactly the same as when processing begins. Readers should note that if you click the "Pause" button during the no-load run and want to continue the no-load run simulation, you need to click the "No-load Run" button again. In the paused state, clicking "Start" will directly resume processing from this position.

Here you can set up cyclic processing. Clicking the "Cyclic Processing" button will bring up the following interface:

XC3000 T2.0 Series Laser Cutting System User Manual

• Enable Loop Processing: When checked, loop processing will be enabled. • Number of cycles: Indicates how many times the process will be paused. • Number of iterations: Indicates how many times the program has already performed the processing. • Reset: Sets the number of iterations to zero. • Cycle interval: How long to wait after one processing cycle ends before starting a new processing cycle. • Processing mode: Normal processing means cutting, and idle operation means no light or air is emitted and the machine does not follow the workpiece trajectory. Clear previous processing count: When checked, the cycle processing will start and clear the previous processing count.

Breakpoint mode can only be entered when the device is paused. In breakpoint mode, most functions of the control panel will be locked. Customers can use manual buttons or handles to move the cutting head and also set the height. 98

XC3000 T2.0 Series Laser Cutting System User Manual

Clicking the " Continue from Breakpoint" button will return the cutting head to the power-off positioning coordinates and resume processing.

In pause mode, clicking this button will move the cutting head backward along the processing trajectory. Clicking pause will stop the retraction action.

When paused, clicking this button will move the cutting head forward along the processing trajectory.

Click this button to return to the mechanical zero point. After entering the software, the first step is to click "Return to Zero" to activate all functions of the control panel. When checked, the cutting head will automatically return to the selected marker point after each processing cycle. When checked, select the graphic in the current drawing, and click the "Start" button to process only the selected graphic. When checked, soft limit is activated. After selecting this option, click the "Start" button. Before automatic processing, the machine tool will automatically perform an edge-finding action.

: Set the manual back distance; Set the manual forward distance.

• Timing: Indicates the time spent using the software. • Piece-rate: Each piece of work is counted once. • Planned quantity: The planned actual quantity to be processed. Click the "Manage" button in the processing count section, and the following dialog box will 99

XC3000 T2.0 Series Laser Cutting System User Manual pop up:

• Planned number of pieces to be processed: Set the expected number of pieces to be processed. • Number of completed parts: Displays the number of parts that have been processed. • Clear: Clears the current quantity that has been processed. • After the plan is completed: A corresponding prompt will be given when the actual processing quantity reaches the expected processing quantity. • Pause counting: Temporarily stop processing and counting.

IV. CNC Auxiliary Functions Click the "CNC" tab in the menu bar. This tab mainly includes simulation, height adjustment parameters, and auxiliary function parameters. See the image below:

100

XC3000 T2.0 Series Laser Cutting System User Manual

4.1 Simulation Please simulate the machining process before proceeding to ensure the machining path is correct. Click the "Simulate" button under the CNC tab to simulate the machining drawing; you will see the simulated motion in the drawing area. See the image below:

• Simulated speed: The speed at which the cutting path is simulated.

4.2 Enable The software will automatically enable the servo upon startup, allowing the machine tool to move. Alternatively, you can click the "Enable" button to de-enable the servo.

4.3 Return to origin After opening the software, you need to perform a zeroing operation. Click the "Return to Origin" button, and the Return to Origin settings dialog box will pop up, as shown in the following figure:

101

XC3000 T2.0 Series Laser Cutting System User Manual

After selecting the axis to return to the origin, click " Start Return to Origin " in the dialog box and wait for the machine to perform the return-to-origin movement.

4.4 Edge Finding automatic edge finding , manual edge finding , and disk center finding . Automatic edge finding has two methods: three-point edge finding and six-point edge finding . • Automatic edge finding Click the "Find Edge" button under CNC pagination to bring up the edge finding parameters dialog box, as shown in the figure below:

102

XC3000 T2.0 Series Laser Cutting System User Manual

After setting the parameters, click "Save and Start Edge Finding Action Now". The machine tool will automatically perform the edge finding action, and the edge finding results will be displayed below the drawing area. The following are the parameters for automatic edge finding: 1) Automatic board size recognition: When checked, the board size will be automatically calculated after edge detection. 2) Plate Dimensions: X is the length of the steel plate along the X-axis of the machine tool. Y is the length of the steel plate along the Y-axis of the machine tool. Please note that entering incorrect plate dimensions may result in the plate puncturing. Please enter the actual plate dimensions! 3) Edge distance: Sets the offset of the P point position for edge finding. A positive value will shift the zero point of the board inward, and a negative value will shift it outward. 103

XC3000 T2.0 Series Laser Cutting System User Manual 4) Edge finding methods: There are three-point edge finding and six-point edge finding. Six-point edge finding is recommended for thin plates. It performs six single-point edge finding actions to effectively avoid the interference of tooth tips on the edge finding of thin plates. 5 ) Edge finding starts from the current cutting head position: When selected, the edge finding action starts from the current cutting head position. After selecting this function, please move the cutting head into the material and make sure there is material under the current cutting head. 6 ) Start edge finding from the starting point: When selected, the edge finding action will start from a fixed position. Move the cutting head to the position where there is board below, and click "Save Edge Finding Start Point". The current position of the cutting head will be recorded as the fixed position of the edge finding action. 7) Calculated rotation angle: The rotation angle obtained after edge finding. 8) Detailed parameters for edge finding: Set the basic parameters for capacitor edge finding. 9 ) Edge finding height: Sets the height between the cutting head and the board during the edge finding process. 10 ) Edge detection step height: The sensitivity of the detection when detecting the edge of the board. The larger the value, the less sensitive it is, and the greater the overshoot distance of the Z-axis; the smaller the value, the more sensitive it is, and the greater the probability of mistakenly detecting the undulation of the board as the boundary of the board. 11 ) Edge finding speed: Set the edge finding speed of the machine tool. 12 ) XY axis zero point correction: After edge finding, correct the edge finding result. Setting a positive value will shift the edge inwards and a negative value will shift the edge outwards. • Click the "drop-down button" for edge finding, and a drop-down menu will pop up. Check "Clear edge finding angle after processing" and the edge finding angle will be automatically cleared after processing is completed. • Click the drop-down button for edge finding to bring up the drop-down menu. Click "Clear Edge Finding Angle" to clear the current edge finding angle. • Manual edge finding Click the "Find Edge" button under CNC pagination to bring up the edge finding parameters dialog box, as shown in the figure below:

104

XC3000 T2.0 Series Laser Cutting System User Manual

Click the "Manual Edge Finding" button. Following the diagram in the dialog box, the board is placed at an angle. Click the axis movement button to move it to the edge of the X-axis. Click the "P1" button to get the coordinates of point P1. Click the axis movement button to move it to another point on the X-axis edge. Click the "P2" button to get the coordinates of point P2. Click the "Calculate Angle" button to complete the manual edge finding process. The edge finding results will be displayed at the bottom of the drawing area as shown in the following figure:

• Centering the disc Click the "Find Edge" button under CNC pagination to bring up the edge finding parameters 105

XC3000 T2.0 Series Laser Cutting System User Manual dialog box, as shown in the figure below:

1）Edge finding height: Sets the height between the cutting head and the board during the edge finding process. 2）Edge detection step height: The sensitivity of the detection when judging the edge of the board. The larger the value, the less sensitive it is, and the greater the overshoot distance of the Z-axis; the smaller the value, the more sensitive it is, and the greater the probability of mistakenly detecting the undulation of the board as the edge of the board. 3）Edge finding speed: Sets the edge finding speed of the machine tool. 4）Start edge finding from the starting point: When selected, the edge finding action will begin from a fixed position. Move the cutting head to the position where there is material below, and click "Save Edge Finding Start Point". The current position of the cutting head will be recorded as the fixed position for the edge finding action. 5）Start edge finding from the current cutting head position: When selected, the edge finding action will start from the current cutting head position. After selecting this function, please move the cutting head into the material and make sure there is material under the current cutting 106

XC3000 T2.0 Series Laser Cutting System User Manual head. • Memory-based edge-finding angle 1）Restore edge finding angle only: Restore the angle of the last edge finding. 2）Restore edge finding angle and return to zero: Restore the last edge finding angle and return to the workpiece zero point. 3）Set edge finding angle: Manually set the appropriate edge finding angle. 4）Clear edge-finding angles after processing: The edge-finding angles for this operation will be automatically deleted after processing is completed. 5）Clear edge finding angles: Manually delete edge finding angles. • One-click cut 1）One-click cut in the X direction: Select and cut the edge above in the X direction. 2）One-click cut in the Y direction: After selection, the top edge in the Y direction will be cut off.

4.5 Error Detection Once enabled, this function will record the motion trajectory of the next cut. This function can be enabled when debugging servo parameters; the overlap between the actual motion trajectory and the graphic can be used as a basis for debugging servo parameters; please do not enable this function during normal processing.

4.6 Focus Test This setting is used to adjust the accuracy of the cutting head's focus. Clicking "Focus Test" allows you to set the height change of the cutting head during the cutting process. By observing the cutting effect of the five line segments after cutting, you can analyze and determine that the best focus is zero focus. It is recommended to use a 1 mm thin plate for the most obvious observation effect.

4.7 Processing Tasks If an urgent order is suddenly inserted during the cutting process, but the current drawing has only been cut halfway, you can save the processing task and replace it with a new drawing. Once the urgent task is completed, click "Load Processing Task," import the saved processing file, and continue processing to complete the remaining tasks. If the machine suddenly stops 107

XC3000 T2.0 Series Laser Cutting System User Manual processing due to external interference, you can click "Resume Abnormal Breakpoint Processing Task" to resume processing.

4.8 Startup prompt You can customize the message displayed each time you open the software.

4.9 Maintenance The maintenance prompts can be customized, including the prompt cycle, the prompt time (processing time or computer host time), the prompt method (alarm or pop-up), and the advance warning time.

4.10 Switchboard One-Click Switching Click the "One-Click Switch" button on the switchboard, and the system will automatically switch the switches. One-click replacement flowchart for lifting motor:

108

XC3000 T2.0 Series Laser Cutting System User Manual

4.11 Capacitive Sensor Click the "Capacitive Sensor" button under the CNC page, and the following dialog box will pop up:

It displays information such as the capacitance curve and the current capacitance value. Clicking the "Export Calibration Data" button will export the current calibration data; clicking the "Reset Capacitance" button will reset the current capacitance value, requiring recalibration. Click the "drop-down button" on the capacitive sensor to bring up the drop-down menu. Below the cutting head, where there is a material, click the "one-click calibration" button to calibrate the cutting head.

4.12 Height Adjuster Parameters Click the "Height Adjuster Parameters" button under the CNC tab to bring up the 109

XC3000 T2.0 Series Laser Cutting System User Manual parameter dialog box shown below: Lifting motion Parameter name

default

Remark

value Maximum height of 30

After the Z-axis follow-up is completed, the height

the outline

raised is based on the current position of the cutting

head;

recommended

that

this

parameter should not be too large, and can be set to about half of the Z-axis travel; a value that is too large will reduce the processing efficiency to a certain extent. Activate short-range Open

Enable: Enables short-range no-attack movement.

no-raise sword

Disable:

Disables

short-range

no-attack

movement. Short

distance 8

If the short-distance non-lifting blade setting is

without raising the

enabled, and the straight-line distance between

knife

the end point of the current contour and the starting point of the next contour is less than this value, the cutting head will move to the starting point of the next contour in a following state.

Start Frog Jump

Open

Startup: When cutting a contour and moving to the next contour, the cutting head will rise and move simultaneously; when it is close to the cutting position, the cutting head will move downward in advance to speed up processing efficiency. Closed: When cutting a contour and moving to the next contour, the cutting head will first rise. After rising, it will move to the starting position of the next contour cutting before moving downward to reduce the risk of collision and protect the cutting head.

Frog jump height Maximum

The take-off height of a frog jump in the air

descent 20

Maximum descent distance during frog jump

distance 110

XC3000 T2.0 Series Laser Cutting System User Manual

Follow-up parameters Parameter name

default

Remark

value Follow-up level

The default settings are fine; generally, no modifications are needed .

Follow-up speed Directly

18 the 5

maximum height

The maximum downward velocity. If the follow-up height is greater than this value, the cutting head will first follow to a position 1mm away from the board, and then rise to the follow-up height . At this time , the follow-up is in the off state to ensure accurate height. If the follow-up height is less than this value, the cutting head will directly follow to the following height to speed up the cutting efficiency.

Real-time calibration

Check

The algorithm is optimized according to the set time, resulting in more accurate calibration of the capacitor data.

Indicator capacitance 1000

This value takes effect when the calibration

jump value

touch-plate signal method is selected as capacitor switching. Parameter definition: During calibration, if the absolute value of the difference between the capacitance value of the current cycle and the capacitance value of the previous cycle (1ms ago) is greater than this value, it is considered that the cutting head has touched the plate. At this time, the cutting head moves upward and begins to calibrate and record the relationship between capacitance value and height.

Width in place

0.2

Determine the height range within which the follow-up mechanism is in place.

Servo

system 5

Delay

can

automatically

feedback delay

adjusted through self-tuning.

Altitude sensor delay 10

Delay

can 111

automatically

measured

and

measured

and

XC3000 T2.0 Series Laser Cutting System User Manual adjusted through self-tuning. collision parameters Parameter name

default

Remark

value Perforated

plate 200

delay

During piercing, the alarm will only stop cutting if the duration of the contact plate signal exceeds this value.

Cutting plate delay

100

During cutting, the alarm will only stop cutting if the duration of the contact plate signal exceeds this value.

Empty line collision 50

During a no-load operation, the alarm will only stop

delay

cutting if the duration of the collision signal exceeds this value.

Pre-collision

plate 0.1

height

If the current height is less than this height, the impact

signal

considered to

have

been

triggered; to protect the nozzle, it is recommended to leave this function at the default value. Edge-following

closure

anti-collision plate

When the cutting head is on the edge of the board after it is turned on, prevent it from shaking and hitting the board. Automatic speed

Parameter name

default

Remark

value speed

1.8

The maximum speed of the machine tool is limited. When the commanded speed is greater than this speed, this speed is used as the standard. The maximum speed is generally calculated using the maximum speed of the motor and the pitch.

acceleration

5,000

Acceleration during cutting.

Acceleration time

100

The acceleration time during cutting: the larger this value, the slower the acceleration and the less impact on the machine tool; the smaller this value, 112

XC3000 T2.0 Series Laser Cutting System User Manual the faster the acceleration and the greater the impact on the machine tool. Manual speed Parameter name

default

Remark

value Manual slow speed

1.2

The speed of the shaft when it moves manually.

Manual speed

In fast mode, the axis speed is manually controlled when the axis moves .

4.13 Lubrication Click the "Lubrication" button under the CNC tab to bring up the lubrication settings dialog box. You can view the remaining time until the next lubrication, or click "Lubricate Now" to immediately lubricate the machine tool. See the image below:

4.14 Dust Removal Click the "Dust Removal" button under the CNC page break to bring up the dust removal settings dialog box, where you can control the dust removal to be turned on, off, and timed. You can also click to turn the dust removal on or off with a single click. See the image below:

113

XC3000 T2.0 Series Laser Cutting System User Manual

4.15 Interface Settings Click the "Interface Settings" button under CNC pagination to bring up a dialog box, as shown in the following figure:

114

XC3000 T2.0 Series Laser Cutting System User Manual

1) Alarm mode : This is usually selected during debugging based on the user's situation; it is not selected by default. 2) Log types : Users can select relevant logs according to their needs and view them in the log area. 3) Fly-through debugging : Check the box to enable EDS2000 hardware fly-through, and you can set pulse fine adjustment and pulse coarse adjustment. 4) Operation panel • Switch to bottom panel: When checked, the console function buttons will be located at the bottom of the main interface for portrait mode. The interface needs to be restarted for the changes to take effect. • Enable processing lock: When checked, processing operations cannot be performed in the console. • Enable automatic software activation: If checked, the software will automatically activate upon opening; if unchecked, the software will not automatically activate. • Enable manual downward movement of the anti-collision plate along the Z-axis: Enable collision detection during Z-motion. • Enable automatic lift upon Z-axis contact with the plate: Enable the lift function after contact 115

XC3000 T2.0 Series Laser Cutting System User Manual with the plate.

4.16 Forced Reset Clicking "Force Reset" will stop all current machine tool movements; this is used in emergency situations.

4.17 View thread call information Click this button to bring up a dialog box where you can view the error status.

4.18 View Click this button to switch languages. The changes will take effect after you reopen the software.

4.19 Bottom Status Area It mainly consists of "Graphing Log", "System Log", and "System Alarm". Clicking the page title will allow you to switch to view other log contents, as shown in the image below:

4.20 Drawing Log The main function is to provide prompts and guidance in the drawing log status bar when editing graphic files, as shown in the image below: 116

XC3000 T2.0 Series Laser Cutting System User Manual

4.21 System Log The system log mainly records our software operations, as shown in the image below:

4.22 System Alarm System alarms mainly display whether the software currently has any alarms or prompts, as shown in the figure below:

Note: When a red alarm is displayed in the bottom status area, the red alarm needs to be cleared before processing can proceed. If the indicator is gray or white, it is only a software prompt and does not affect processing . 117

XC3000 T2.0 Series Laser Cutting System User Manual

I. Quick Start Guide to Pipe Cutting 1.1 Open the software

After the software is installed, this

icon will appear on your desktop.

Double-click the " PipePanelHMISwitch " laser cutting control software with your left mouse

button to run it.

Select "Enter Pipe Cutting

Software" to start the software .

118

XC3000 T2.0 Series Laser Cutting System User Manual

II. Introduction to CNC Application Functions The software's main interface is one of the most frequently used interfaces by customers, and it has many operation areas as shown in the image below.

1) Common Toolbar 2) Quick access area for component functions 3) Part graphic display 4) Operation and usage log 5) Cutting the sports hurdles 6) Coordinate display bar 7) Follow-up control bar 8) Process Parameters Section 9) Layer Application Bar

2.1 Common Toolbar As shown in the image below: The toolbar is divided into two interfaces: pagination and CNC/File. The content displayed varies depending on which pagination is selected. Files: The file interface includes software parameter backups and fault information saving.

119

XC3000 T2.0 Series Laser Cutting System User Manual

2.2.1 File Menu

Parameter Backup: After mechanical debugging is complete, to prevent parameter loss

due to unexpected situations, this function can be used to back up the debugged software. Make a backup of the parameters. 2.

One-click save of fault information: When abnormal problems occur during software

use, the fault information can be saved for easy review. Fault/problem points. 3.

Diagnostic tools: a、Handheld controller detection: Handheld controller detection via mobile app b、I/O monitoring: Monitoring of input and output signals at board points, phosphometry

120

XC3000 T2.0 Series Laser Cutting System User Manual monitoring, etc. c、Capacitive sensor: View standard capacitance curve, view real-time capacitance curve changes. d、Hardware Information: Viewing Slave Communication Information e、Gas DA correction: Oxygen, nitrogen, and air pressure correction f、Machine tool coordinate information: viewing machine tool coordinates, workpiece coordinates, workpiece zero point, and tracking error, etc. g、Burn-in test: This function is used for the break-in of machine tools when a new machine tool has been built or when hardware configuration has been replaced, as the machine tool needs to be broken in. To ensure smooth operation, select the motion axis requiring break-in, and set the corresponding starting position and stroke. These settings depend on the machine tool. After setting the distance, you need to set the overall feed rate and the number of break-in cycles, adjusting these values according to actual needs. h、Self-tuning: XYU U2 Z self-tuning. The prerequisite for self-tuning is that the axes to be tuned have all returned to the zero point XYU U2 and can move forward. The servo motion is 30mm. The Z-axis must return to zero and be successfully calibrated before self-tuning can be performed. The significance of self-tuning is that the software can make internal adjustments based on the servo feedback delay calibrated. For example, when the follow-up is unstable, or when the hole cut by the flying cutter is not closed, or when the opening is too early or too late, the self-tuning function can be used for adjustment. 121

XC3000 T2.0 Series Laser Cutting System User Manual I. Oscilloscope: Can monitor axis speed, pulse feedback, laser power, etc. 4.

Report: Processing Report. Click this button to view the processing time, start time, and

number of perforated parts, etc.

2.3 Return to origin After opening the software and entering the software, click the "Return to Origin" button under the CNC interface. You can choose the zeroing method, either single-axis zeroing or setting all axes to return to the origin in the zeroing settings, synchronous return of rotary axes to the origin, support lifting after returning to the origin, zero-point offset when using absolute mode for the U-axis, etc.

Note: Clicking the arrow indicator below Return to Origin will show the Return to Origin settings. Clicking Return to Origin settings will bring up a pop-up window where you can select the desired return to zero method from the options provided. 122

XC3000 T2.0 Series Laser Cutting System User Manual Synchronous return of the rotary axis to its original position. During the return process, the system can be optimized to accelerate the process, such as by lowering all supports before the Y-axis return point and raising the supports after the Y-axis return. Users can select the desired method as needed. When U U2 needs to maintain a horizontal center position after returning to its origin, if U U2 is in absolute mode, the absolute value zero offset of U U2 can be set in the origin setting to keep it at zero. If incremental zeroing is used, the backtracking distance after zeroing needs to be entered in the configuration tool to maintain a horizontal position after centering. After selecting the options, click the "Return to Origin" button. A pop-up window will appear showing the return-to-origin type and order. Before clicking "Start Return to Origin," ensure that the limit/origin sensors are functioning correctly, as shown in the image below.

123

XC3000 T2.0 Series Laser Cutting System User Manual

2.4 Exercise Settings

1. Pre-processing edge alignment: Initially, the Y-axis will move an equal distance based on the set chuck-to-cutting-head distance. The cutting head then descends to locate the pipe edge, followed by a retraction based on the set parameters, and finally a flat cut on the pipe edge. Alternatively, a fixed-height mode can be selected for edge alignment and flat cutting. 2. Rotary axis centering based on nearest distance: When checked, the rotary axis will calculate the nearest distance for centering. 3. Releasing the main card after resetting to zero: The main card opens after resetting to zero. 4. Manual centering bracket opening: When this function is activated, the support cylinder or shaft will automatically rise after manual centering.

124

XC3000 T2.0 Series Laser Cutting System User Manual 5. Release the main card after cutting: The main card opens after cutting. 6. Release the middle clip after cutting: The middle clip opens after cutting. 7. Enable High/Low Face Recognition: When cutting rectangular tubes, the system generally determines that the wider face should be on top during cutting. If the narrower face is clamped on top during cutting, the system will automatically perform two checks to determine the width and narrowness of the face and finally adjust the system so that the wider face is on top. 8. Automatic program execution supports floating opening: After opening, when cutting rectangular tubes, the support axis will automatically float to provide support. 9. Activate floating support for parts: When activated, the feed shaft will automatically float and provide support when cutting long parts. 10. Enable Automatic Feeding: When enabled, the feeding action will be executed during process editing. 11. Enable Automatic Feeding: When the program starts, the material rack actions edited in the process editor will be executed automatically. 12. Move to the specified position after program ends: After the cutting program ends, the YU axis can return to the set specified position and angle. 13. If interference occurs between the front and rear clamps during the retraction of the rear clamp after cutting, the rear clamp will tighten. 14. Activate floating flip: The cylinder automatically flips after the cutting of the parts is completed. 15. Automatic dust extraction control before part cutting: Selecting this function will automatically initiate dust extraction when cutting begins. 125

XC3000 T2.0 Series Laser Cutting System User Manual 16. Weld Seam Recognition: Identifies the location of weld seams on pipes; options include sensor recognition or camera imaging . 17. Machining is permitted if the drawing exceeds the machinable length of the pipe: Soft limit detection is performed on a part-by-part basis. When soft limit protection is enabled, even if the drawing exceeds the Y-axis travel, it will not report "out of travel range," but will allow machining of parts within the travel range to begin. Parts that partially or completely exceed the Y-axis travel will not be machined. 18. Allow support cylinder to rise automatically: When the current position of the Y-axis is less than the set rising coordinate, the support will rise automatically (the coordinate at which the support rises automatically is less than the Y-axis coordinate ➖ avoidance distance). 19. Enable Floating Feed Support: When enabled, if the feed support is a shaft, it will float up and down following the height of the pipe.

126

XC3000 T2.0 Series Laser Cutting System User Manual

2.5 Error Detection 2.5.1 Roundness Test

127

XC3000 T2.0 Series Laser Cutting System User Manual 2.5.2 Rectangularity Test

Usage: After opening the error detection, there are two tests: rectangle measurement and roundness measurement. Set the diameter of the circle/length and width of the rectangle as needed, then click "Start." You can choose to perform empty line machining or actual machining. After the motion is complete, the system will draw the encoder feedback position on the software. You can use the measurement function to view the roundness error, which can be used as a basis for servo adjustment. If the actual feedback trajectory matches the drawn trajectory but the cut circle is not round, the mechanics need adjustment. This may be due to mechanical clearance or wear and tear on the gears and racks over time.

128

XC3000 T2.0 Series Laser Cutting System User Manual

2.6 Machine Tool Setup 2.6.1 Finding the center Centering: Calculate the deviation between the center of the pipe section and the center of the machine to perform compensation. Centering types: Single-sided centering, Two-point centering, Four-point centering, Four-sided centering, Leveling + Four-point centering Centering compensation values: The centering compensation value for pipe center deviation X is applied to the 0-degree and 180-degree planes, and the centering compensation value for pipe center deviation Z is applied to the 90-degree and 270-degree planes. Operating steps: After the material layout results to be cut are imported from the top left corner, click the small arrow below the machine tool settings, select the desired centering method, and then click "Start" in the pop-up window to perform centering (the prerequisite for centering is that zeroing has been performed, the horizontal beam has been leveled and the center has been aligned, and there is a pipe below. Also check if the dimensions are correct. If there are no problems as mentioned above, then centering can be performed).

129

XC3000 T2.0 Series Laser Cutting System User Manual

hint: 1. Before centering, make sure all axes have returned to the origin. 2. XU has been returned to center and the crossbeam center and level have been checked. 3. Ensure there is pipe material below the cutting head, and that the pipe dimensions are correct. 4. Current centering methods: There are five types in total. Different pipe materials correspond to different centering methods. For example, round pipes can only use two-point centering, square pipes can support all five types mentioned above, and angle iron currently only supports single-sided two-point centering. The centering method must be selected correctly, otherwise the laser head will be bumped. 5. Application Scenarios for Center Finding: When the actual dimensions of the pipe differ significantly from the drawn dimensions, or when non-standard pipe radius/surface dimensions 130

XC3000 T2.0 Series Laser Cutting System User Manual cause the actual position of the cut hole to deviate from the ideal position and fall outside the center, center finding is required for compensation.

2.6.2 Pipe surface correction If the actual dimensions of the pipe are measured and the distance between the left and right sides of the cut part hole is stable, the pipe can be used to correct the manual compensation deviation. If the distance between the left and right sides of the cut part hole is unstable, the mechanical level needs to be adjusted.

2.6.3 Automatic Centering Configuration Centering Method: Different centering methods are set according to different pipes. If the centering method in the automatic centering configuration is not selected, the separately added centering contour compensation value will not take effect. When using pipe surface contour

131

XC3000 T2.0 Series Laser Cutting System User Manual correction for surface compensation, a centering method must be selected in the automatic centering configuration for the pipe surface contour correction value to take effect. a)

Square tube: Two-point centering, four-point centering, four-sided centering, leveling

+ four-point centering b)

Angle steel: Two-point centering, two-plane centering

Channel steel: Two-point centering, three-sided centering

Round tubes, elliptical tubes, and waist-shaped tubes: finding the center at four points.

Centering compensation threshold: Maximum deviation of the pipe surface during centering compensation; Centering head lifting height compensation: Compensation for the lifting height of the cutting head during centering.

132

XC3000 T2.0 Series Laser Cutting System User Manual 2.6.4 Pipe Cutting Cutting: Import the nesting results exported from TubeKet into the software, click the cutting function, select the cutting line rotation direction and cutting mode, and manually clamp the chuck. Click start to begin the cutting action.

2.6.5 Machine Tool Debugging Correction: A: School Level To correct the levelness of the zero-degree plane of the clamped pipe, it is recommended to use a standard pipe for correction, and the correction surface must be flat. Before correction, ensure that the system's X, Z, and U2 axes have returned to the origin. You can manually adjust U2 to a horizontal position temporarily, and manually move X to the center of the pipe. Then, click to obtain the horizontal angle and center coordinate X. After that, import the standard pipe layout 133

XC3000 T2.0 Series Laser Cutting System User Manual result drawn in TubeKit. It is recommended to use (40×40) rectangular pipes without R-angles for leveling the crossbeam.

B: Center of the school beam Once the mechanical structure is fixed, the U2 axis rotation will have a fixed center of rotation. The center of the crossbeam is the coordinate (X) of this center of rotation in the X-plane. Determining the center of the U2 axis requires a standard rectangular tube (40×40mm) without chamfers. Before calibrating the crossbeam, ensure the system's X, Y, and Z coordinates are 134

XC3000 T2.0 Series Laser Cutting System User Manual correct, the U2 axis has returned to its origin, and is leveled, and the calibration surface is a plane. Then, manually move the X-axis above the standard tube and visually locate its center position. Click to obtain the X-center coordinates. After that, import the standard tube layout results drawn using TubeKit and click "Start" to calibrate the crossbeam center.

135

XC3000 T2.0 Series Laser Cutting System User Manual 2.6.6 Edge probing configuration

Edge detection configuration Parameter name

default

Remark

value Follow-up level

The higher the follower level, the faster the follower response.

speed

Follow-up falling and rising speed

high

Follow-up height to the pipe surface

Follow-up step

The larger the step value, the farther the probe distance. 136

XC3000 T2.0 Series Laser Cutting System User Manual Low-speed

edge

The larger the step value, the farther the probe distance.

exploration step jump Low-speed

edge

Movement speed during low-speed edge probing

probing speed Low-speed probing

edge distance

1mm

Position for maintaining a fixed height at a distance from the corner during low-speed edge probing.

corner length Exploration method

Capacitance detection / External sensor detection

Note: The starting position of low-speed edge probing is calculated as pipe radius - R-angle distance from the corner.

137

XC3000 T2.0 Series Laser Cutting System User Manual 2.6.7 Edge Finding Repeat Accuracy Analysis

"Edge Finding Repeatability Accuracy Analysis" refers to testing the edge finding performance of the height adjuster, checking whether the height adjuster's performance is up to standard, and whether there is any tilting or significant deviation in the assembly of the laser head. Under normal circumstances, the maximum error for edge finding using a 2D nozzle is within 8 micrometers, and for a 3D nozzle, it is within 12 micrometers.

138

XC3000 T2.0 Series Laser Cutting System User Manual 2.6.8 Security Configuration Chuck avoidance type: No avoidance / Coordinate avoidance Avoid administrator login password: 4006701510 A: Avoid the obstacle in advance / Obey the obstacle at the designated location.

Avoid in advance / Avoid when in position Parameter name

default

Remark

139

XC3000 T2.0 Series Laser Cutting System User Manual value Automatic

chuck

Avoidance options: chuck avoidance/no avoidance

avoidance function Avoidance type

Avoid in advance / Avoid when in position / Avoid by moving the truck / Avoid by moving the crossbeam (There are currently two types of moving obstacle avoidance systems for medium-duty trucks: one is the moving obstacle avoidance system for medium-duty truck cylinders, and the other is the moving obstacle avoidance system for medium-duty truck axles.)

Y-axis avoidance limit

Move the Y-axis to the designated position, and the

coordinates (triggering

chuck will prevent the collision according to the set

condition)

avoidance method.

Delay after the claws

The claw determines the completion of the opening

open

after a delay following the claw's opening.

Delayed Action

Selectable options: None/Pause/Signal detection

Avoiding

the

front

When avoiding a collision, the front chuck avoids the

chuck rotation speed

rotational speed.

Sensor signal detection

After the chuck opens to avoid collision, a signal

timeout alarm time

detection time is set. If no signal is detected within the set time, a timeout alarm will be triggered.

140

XC3000 T2.0 Series Laser Cutting System User Manual Rotate

the

medium-sized card to

This value can be filled with a specific angle, or you can choose to center it.

a specific angle Back-center tilt angle

The front card is rotated to a specific angle to find the detection signal. This value can be filled in manually or obtained directly from the current point.

Enable Y-axis second

If checked, the second positive soft limit on the Y-axis

positive soft limit

will be enabled after the obstacle avoidance, and the first positive soft limit will not take effect.

Enable

second

soft

When checked, enable positive and negative soft limits

limit on X-axis

after X-axis avoidance.

After the chuck avoids

This value only takes effect after the chuck has cleared

the

negative

positive

and

the obstacle; before clearing, the X positive and

soft

limit

negative soft limits still rely on the first soft limit!

switch After chuck clearance,

This value only takes effect after the chuck has cleared

the Y-axis positive soft

the obstacle; before clearing, the Y-axis soft limit still

limit is maintained.

relies on the first soft limit!

B: Medium-duty truck moving avoidance (cylinder moving avoidance) / crossbeam moving avoidance

141

XC3000 T2.0 Series Laser Cutting System User Manual

Medium-duty truck moving obstacle avoidance (cylinder moving obstacle avoidance) / crossbeam moving obstacle avoidance Parameter name

default

Remark

value Automatic

chuck

Avoidance options: chuck avoidance/no avoidance

avoidance function

142

XC3000 T2.0 Series Laser Cutting System User Manual Z-axis

avoidance

and

The position where Z rises and stops when performing

upward position

the avoidance maneuver.

Avoidance type

Avoid in advance / Avoid when in position / Avoid by moving the truck / Avoid by moving the crossbeam

Crossbeam

parking

The position where the X-beam axis stops when

position

avoiding an obstacle.

Short parts allow for

When checked, this allows the front clamp to avoid the

avoidance

rear clamp and cut independently.

Avoid relative distance

After the front clamp pushes forward a cylinder distance, the maximum positive stroke of the rear clamp is not relative to the distance when the cutting head follows and interferes. Measuring the position of the front clamp before avoidance and then measuring its position after avoidance gives the relative avoidance distance value. When using axle avoidance, the relative distance is the distance the truck moves forward during the avoidance maneuver.

Y-axis avoidance limit

Y-axis movement limit coordinate position before

coordinates

avoidance trigger condition

(triggering

condition)

143

XC3000 T2.0 Series Laser Cutting System User Manual Delay after the claws

Waiting time after the claws open

open Delayed Action

You can choose to use signal detection, and wait for the signal to be detected before proceeding with the cutting. Alternatively, you can pause the process and manually check if the opening is complete before clicking "Start Cutting".

Avoiding the front chuck

Chuck rotation speed during avoidance

rotation speed Sensor signal detection

If the sensor signal is used to detect when the chuck

timeout alarm time

opens, and an alarm is triggered after a certain waiting time since the sensor has not detected the opening, an alarm will be issued.

Rotate

the

For example, a medium-duty card needs to return to

medium-sized card to a

center before the signal can be detected by the sensor.

specific angle

You can choose to return to center or manually fill in the angle.

Y-axis clearance position

The distance from the Y-axis limit avoidance position to

to cutting head distance

the cutting head needs to be measured in practice.

Distance

Distance between chuck and cutting head

middle

from card

the the

144

XC3000 T2.0 Series Laser Cutting System User Manual cutting head

Medium-duty truck moving obstacle avoidance (cylinder moving obstacle avoidance) / crossbeam moving obstacle avoidance Parameter name

default

Remark

value Use medium-duty card

When the chuck avoidance mechanism uses a shaft

to avoid axle

instead of a cylinder, this option needs to be checked in the chuck avoidance settings.

Minimum coordinates of

After processing is complete, the main card is first

the primary card that

retracted to the y-axis to avoid the limit coordinates,

allows rollback in China

and then the intermediate card is retracted to position 0. To improve efficiency, an appropriate value can be set so that the intermediate card can retract earlier when the main card retracts to this value.

Detection

safe

Before

performing of

the

avoidance

axis

maneuver, are

the

position of moving axis

coordinates

checked.

of medium-duty truck

Avoidance or x-axis movement can only be performed if the coordinates are 0 or greater than that value (which cannot be greater than the relative avoidance distance).

Avoidance instructions: After the front clamp avoids the cutting edge, the shortest length for the rear clamp to hold and cut between the front and rear clamps is: distance from the avoidance 145

XC3000 T2.0 Series Laser Cutting System User Manual position to the cutting head + relative avoidance distance - distance from the front clamp to the cutting head. Because the position of the front clamp on the U2 axis is fixed, the distance from the clearance position to the cutting head and the distance from the front clamp to the cutting head determine the shortest pipe length of the part to be clamped and cut by the two clamps. Please see the diagram below for details:

146

XC3000 T2.0 Series Laser Cutting System User Manual

147

XC3000 T2.0 Series Laser Cutting System User Manual 2.6.9 Parts Lifting Configuration

Lifting Support: This feature will only appear after the shaft opening has been configured in the configuration tool. Usage: Click "Return to Original Support Shaft" to return the support shaft to

its origin; then jog

to bring the support shaft closer to the tube surface; finally, click

"Calibrate Support Shaft" to move it to the tube surface, and then lower it to the set calibration height while waiting for the part to float and support.

Lifting parameter settings 148

XC3000 T2.0 Series Laser Cutting System User Manual Parameter name

default

Remark

value Shaft speed adjustment

Axis floating rise and fall speed

Axis return to original

If the support shaft returns to its original position and there is no limit signal, the current position can be set to zero.

Shaft

rise

(for

use

after

After calibration, click "One-Click Ascent," and the

calibration)

support will rise to the set calibration height.

Lifting parts waiting position

Lifting shaft descent waiting position

Distance from part lifting shaft

When the length of the part exceeds the set floating

1 to cutting head

distance, the Y-axis will move beyond the currently set value and float.

Distance from part lifting shaft

When the length of the part exceeds the set floating

2 to cutting head

distance, the Y-axis will move beyond the currently set value and float.

149

XC3000 T2.0 Series Laser Cutting System User Manual 2.7.0 Flip Configuration

Flip parameter settings Parameter name

default

Remark

value Distance from cylinder 1 to

Determine whether the tilting cylinder 1 is activated

cutting head

based on the set distance and the length of the protruding part. 150

XC3000 T2.0 Series Laser Cutting System User Manual Distance from cylinder 2 to

Determine whether the tilting cylinder 2 is activated

cutting head

based on the set distance and the length of the protruding part.

Distance from cylinder 3 to

Determine whether the tilting cylinder 3 is activated

cutting head

based on the set distance and the length of the protruding part.

2.7.1 Supported Configuration

151

XC3000 T2.0 Series Laser Cutting System User Manual

Support shaft height parameter settings Parameter name

default

Remark

value Shaft speed adjustment

Manual jog adjustment of shaft up and down speed

Axis return to origin

Support shaft returns to origin, zero point, and motion stops.

Use after axis rise calibration

After calibrating the pipe surface height, record the calibrated height, and then raise the pipe to the current calibrated height position with one click.

Support close to the pipe

Manually jog the axis until it is close to the pipe

surface (calibration)

surface, then click "calibrate" to record the current height coordinates.

Usage Tips: First, the support method used is an axle, not a cylinder. If a cylinder is used, these parameters are unnecessary. Configure the support axis using the configuration tool. After setting the avoidance parameters, you can open the software and find the support configuration settings in the machine tool settings. First, clamp a standard pipe. Then, jog the support axis upwards (make sure the axis movement direction is correct) until the support axis is close to the pipe but not pushing it up. Then click "calibrate." Set support 1, 2, 3, etc. in this way, and then click "save." When you need to support floating and following the pipe, please refer to the motion settings explanation on page 5. 152

XC3000 T2.0 Series Laser Cutting System User Manual

2.7 Calibration The cutting head height and capacitance value must be calibrated before cutting can begin.

Operating steps: Manually move the Z-axis down the software interface to a position 3cm 153

XC3000 T2.0 Series Laser Cutting System User Manual above the tube, then click "Start Calibration".

2.7.1 Capacitive Sensor Capacitive

sensor

interface 1. You can check if the calibrated capacitance curve

normal

smooth parabola is a normal curve). 2. Is

the

capacitor

fluctuation appropriate? (Fluctuations in the last two digits are normal.) 3. For example, if a calibration fault alarm cannot be cleared, you can click "Reset Capacitor" and then recalibrate.

154

XC3000 T2.0 Series Laser Cutting System User Manual

2.8 Height Adjuster

Lifting motion Parameter name

default

Remark

value The program ends and

0/mm

the position is raised.

This parameter represents the absolute position after machining is completed or after other machining programs have finished, when the Z-axis has been raised to a safe position.

Maximum the outline

height

30/mm

The height by which the Z-axis is lifted after the cutting contour is completed is the distance lifted relative to the safety point position. This parameter value should not be too large, as it will affect machining efficiency.

155

XC3000 T2.0 Series Laser Cutting System User Manual External

height

0.2mm

compensation

The height of the externally introduced section is compensated by 0.2 times.

Start Frog Jump

closure

Frog jump function on/off

Frog jump height

0°

Frog jump height

Maximum

When the midpoint between face A and face B equals

descent

distance

this value, the frog descent begins.

Follow-up parameters Parameter name

default

Remark

value Follow-up level

The higher the follow-up level, the higher the follow-up response during fall and the higher the follow-up response during rise.

Follow-up speed Directly

the

3m/min

Follow-up falling speed

8mm

If the follow-up height is greater than this value, the

maximum height

cutting head will first follow the material to a position 1mm away from the board before raising it to the set height to ensure height accuracy. If the follow-up height is less than this value, the cutting head will directly follow the material to this height to speed up cutting efficiency.

Real-time calibration

30/min

A calibration operation is performed after the set value

156

XC3000 T2.0 Series Laser Cutting System User Manual is reached within a set time. Indicator

capacitance

1000

jump value

This value takes effect when the calibration timing contact signal is selected as capacitor switching.

Width in place

0.2

Changes are not recommended for non-professionals.

collision parameters Parameter name

default

Remark

value Perforated plate delay

200/ms

Perforation detection time

Cutting plate delay

100/ms

Cutting plate detection time

Empty

50/ms

No-load operation collision detection time

0.1/mm

Distance from pipe surface

line

collision

Pre-collision

plate

delay

height

Automatic speed Parameter name

default

Remark

value speed

18/m

In automatic mode, the Z-axis lift speed will read this value.

acceleration

5000/ms

Acceleration in automatic mode

Acceleration time

50ms

Acceleration time in automatic mode

157

XC3000 T2.0 Series Laser Cutting System User Manual

servo system delay Parameter name

default

Remark

value Servo system feedback

(Values fed back via self-tuning Z-axis servo)

delay Altitude sensor delay

(Z-axis self-tuning feedback value)

Note: If the Z-axis fails to self-tuning or has excessive servo latency, it is due to the low rigidity and gain of the driver, resulting in a large feedback latency of the servo system. If the feedback latency of the servo system is greater than 10ms after self-tuning, the position loop gain needs to be increased and the system rigidity needs to be increased appropriately to ensure that the feedback latency of the Z-axis servo system does not exceed 10ms before it can be used normally. 158

XC3000 T2.0 Series Laser Cutting System User Manual

III. Mode Function Description 3.1 Step Step button: When this button is checked, the manual motion axis will move in inch mode, meaning that each axis movement will travel a fixed distance. The step distance is entered in the step box. Note that the maximum inch distance for the XY axis is different from that for the Z axis. The step unit for the U/U2 axes is degrees.

After clicking to enter the step distance input interface, you will see options for high-speed and low-speed jogging, and the step distance setting. Note that the maximum step distance for the XY axis is different from that for the Z axis; enter the value according to your actual needs. The step unit for U2 is degrees (high-speed and low-speed jogging are equivalent to slow and fast 159

XC3000 T2.0 Series Laser Cutting System User Manual manual jogging motion, respectively). Both low-speed and high-speed jogging are limited by the idle speed. The jogging speed distance of the extended axis affects the jogging motion of all configured auxiliary axes.

The new stepper button: After checking this button, clicking the Jog Quick Settings button will bring up the Jog Quick Settings pop-up window. Here you can enter the stepper distance for each axis. Note that the maximum inch distance for X and Y axes is different from that for the Z axis; the stepper unit for U/U2 axes is degrees. You can also enter the low and high speeds (i.e., manual slow and manual fast) for each axis. Both low and high speeds are limited by the idle speed. The distance length in the axis stepper distance configuration box only applies to the configured axes in the auxiliary axes.

160

XC3000 T2.0 Series Laser Cutting System User Manual The wireless controller is connected. When the indicator light turns green, it means the controller is connected and you can use it to control the axes, etc. Conversely, if the indicator light remains gray, it means the controller is not connected. Use the high-speed/slow-speed switch button: Click the middle button on the interface to

switch the axis speed.

When the button changes to HIGH, manually pressing the axis

will switch to fast movement. Click it again to switch the axis speed to LOW.

Machine tool jog axis controls the direction of motion:

161

XC3000 T2.0 Series Laser Cutting System User Manual If the direction set is the same as the setting shown in the diagram, but the horizontal beam becomes more and more off-center during the calibration, change the axis direction in the G-code configuration.

3.2 Manual Debugging

162

XC3000 T2.0 Series Laser Cutting System User Manual

3.3 Laser dotting

Dotting process settings interface parameters: In-slot dimming delay: the time for in-slot light emission. Point-fire dimming power: The peak power of the laser light emitted at a point. Point-and-shoot frequency: The frequency of the laser signal emitted in a point-and-shoot manner. Spot-emitting dimming duty cycle: The duty cycle of the laser signal emitted in a spot beam.

3.4 Blowing pressure setting and gas selection

Air pressure setting interface parameters: Manual oxygen pressure: Manually click to increase oxygen blowing pressure. Manual air pressure: Manually click to increase the air pressure. Manual nitrogen pressure: Manually click to apply nitrogen blowing pressure. 163

XC3000 T2.0 Series Laser Cutting System User Manual

Click the small triangle on the air pressure interface, select the gas used for cutting. You must configure the air pressure you want to use in the configuration tool before you can select it; otherwise, the button will be grayed out and become unselectable.

3.5 Forward/Backward

Application scenario: When a part is cut but not completely through, the undo function can be used to undo to the previous contour and recut. Similarly, the forward function can move across the current part to the contour that needs to be cut.

3.6 Breakpoint Location/Breakpoint Continuation Breakpoint mode can be entered from stop mode. Clicking "Breakpoint Positioning" will lock most machine functions in breakpoint mode. Customers can manually or with a handle operate the moving axis (without clamping or releasing the chuck) to check the cutting effect, etc. 164

XC3000 T2.0 Series Laser Cutting System User Manual

In breakpoint positioning mode, clicking the breakpoint continue button will return YXU U2 Z to the coordinates at the breakpoint positioning time and resume machining.

3.7 Processing Count Management

Processing count management Parameter name

default

Remark

value Backup

If you need to process other parts before the currently planned parts are finished, you can use this function to back up the parts. Once these parts are finished, you can 165

XC3000 T2.0 Series Laser Cutting System User Manual use the restore function to restore the backed-up, incomplete parts. reduction

Restore the backup processing plan

Parts cutting plan Planned

number

Planned number of parts to be processed

parts to be processed Number of completed

Manually setting this value is not recommended.

parts Pipe processing plan Planned

number

After the machining plan is completed, the machining

pipes to be processed

action is selected.

Number

Number of pipes already cut

pipes

completed After completing the

Do nothing / Display a prompt / Display a prompt and

plan

stop processing

Operation method: Open the main interface, go to Processing Control, then Management, set the planned number of parts to be processed, clear the number of completed parts to zero, and select the desired prompt after completing the processing plan (no action required/prompt/prompt and stop processing). After clicking Start Processing, the count will be automatically increased.

166

XC3000 T2.0 Series Laser Cutting System User Manual

3.8 Cyclic Processing

Cyclic processing settings Parameter name

default

Remark

value Loop count

Number of loops required

Number of loops

The number of processing cycles can be reset to zero, but cannot be manually set.

Cyclic interval

This cutting is now complete. The time until the next cutting...

Processing mode

Normal processing mode selection / Idle running mode

Clear

Checking this box will clear the previous number of

processing counts

cycles before processing begins.

167

XC3000 T2.0 Series Laser Cutting System User Manual Operation steps: Click the loop button on the main interface - check "Enable loop processing" - set the number of loops - change the loop cutting interval - select the desired processing mode - click "OK" and start processing immediately.

3.9 Coordinate Display Coordinate point display: machine tool coordinates, workpiece coordinates, workpiece zero point, following error Machine coordinates: The position of the reference mechanical zero point after the axis returns to zero is the machine coordinate. Workpiece coordinates: The coordinates of the workpiece reference zero point during cutting. Follow-up error: The deviation between the sent command and the actual mechanical position

reached.

4.0 Reset Capacitor Reset the current capacitance value. When changing the TRA or cutting head, the capacitance curve remains the same as before, which may result in incorrect capacitance values, such as 168

XC3000 T2.0 Series Laser Cutting System User Manual negative values. This can cause the collision alarm to remain unresolved. Therefore, we need to reset the height. After resetting, the alarm will be cleared, but automatic calibration is required. The default height from the board surface can be used. If the collision alarm cannot be canceled, this function can be used to reset the capacitance value. After resetting, recalibrate.

4.1 Process Editing Enable Automatic Feeding: Selecting this function will automatically feed the pre-laid pipes before cutting. Loading Process: When the "Automatic Loading Before Cutting" function is selected, the system will execute the instructions in the "Loading Process" sequentially before cutting the arranged pipes. These instructions include eight groups: support control, chuck control, delay, centering cylinder control, feed axis movement control, external interaction signal control, loading support cylinder control, and dust extraction control. Each group contains detailed branch instructions.

Add a command before the currently selected command .

169

XC3000 T2.0 Series Laser Cutting System User Manual

Add a command after the currently selected command .

Swap the order of the currently selected command and the previous command .

Swap the order of the currently selected command and the next command .

: Delete the currently selected command

Delete all instructions in the [Feeding Process]

Save the current instructions in the [Process Editor] .

Save the current instructions in the [Process Editing] window and complete the distribution .

170

XC3000 T2.0 Series Laser Cutting System User Manual

171

XC3000 T2.0 Series Laser Cutting System User Manual

In the "Loading Process" section of the workflow editor, the instructions need to be set according to the specific requirements of the site. Please refer to the "Loading Process" diagram below (this workflow is for reference only).

172

XC3000 T2.0 Series Laser Cutting System User Manual

B. [Action Flow Analysis]

上料开始前 Y 轴回到上料位置

中卡主卡全部松开支撑全部下降

上料架所有气缸也进行下降 173

执行定义过程 2 判断条件是否满足

XC3000 T2.0 Series Laser Cutting System User Manual

自定义 1 上料过程完成后再去重复判断一次上料过程 2

条件满足，执行上料气缸 3 上升

支撑一键上升，对中气缸一键夹紧

条件不满足。执行自定义过程 1 进行上料动作

上料气缸 3 下降， Y 移动到上料位置 1 主卡盘夹紧

对中气缸一键下落，上料位置 2 支撑 4 上升

上料位置 3，中卡盘夹紧执行切割

C. [Material Preparation Process]

自定义过程（并行）判断传感器 2 有无信号存在，判断无信号存在，上料 1 上升上料 2 上升

放在加工开始前

自定义过程（并行）判断传感器 2 有信号存在上料气缸 1 下降上料气缸 2 下降

放在零件结束后

174

XC3000 T2.0 Series Laser Cutting System User Manual

四、Process Interface

1) Process Classification 2) Layers 3) Processing type 4) Cutting and processing methods 5) Cutting process 6) Corner cutting process 7) Power control curve 8) Remarks 175

XC3000 T2.0 Series Laser Cutting System User Manual 9) Import/Export 10) Material library configuration 11) Confirm, Apply, Cancel

4.1 Process Tree This software uses a tree-structured storage method to save adjusted process parameters for different materials and thicknesses, making it easy to switch between them. A. After selecting any material in the process panel, right-click the mouse. A pop-up window will appear to add a material category/thickness. Users can add the corresponding material and the thickness under the selected material in the corresponding pop-up window. For example, the following image shows how to add low carbon steel:

B. After adding low-carbon steel, the thickness needs to be increased under the low-carbon steel material:

176

XC3000 T2.0 Series Laser Cutting System User Manual

4.2 Layers This software provides 7 processing layers, each of which can have its own process settings. After importing the graphic to be cut, you can click the layer button on the right to apply different cutting processes to different contours.

4.3 Processing Type Processing type Parameter name

default

Remark

value Standard cutting

Standard

follow-up

cutting,

capable

cutting

round/square/elliptical/slender tubes, etc. Fixed-height cutting

Z-axis fixed-height cutting can only cut round tubes and 177

XC3000 T2.0 Series Laser Cutting System User Manual cannot follow the movement. Ordinary cutting

Standard cutting without piercing

perforation

When the perforation is started, there will be a perforation action during the cutting process.

4.4 Cutting Parameters Cutting parameters Parameter name

default

Remark

value Cutting speed

Set the cutting command speed

Cutting height

Set the distance between the laser head and the pipe during cutting.

Cutting gas

Cutting gas selection: oxygen, nitrogen, and air.

Cutting air pressure

Gas pressure during cutting

Cutting power

Set the peak output power of the laser during cutting.

Duty cycle

The laser's output duty cycle is set during cutting; it's the ratio of output time to total time within one output cycle . A higher value results in higher average output power. 100% can be considered as average power equal to peak power.

178

XC3000 T2.0 Series Laser Cutting System User Manual Cutting frequency

This sets the laser's emission frequency during cutting, i.e., the number of times light is emitted per second. The higher the value , the more continuous the light emission ; 5000Hz can be considered continuous light.

Duration of stay

Set the delay at the starting point of the graphics processing.

Corner parameters Parameter name

default

Remark

value Enable

U-axis

speed

After checking this option, the rotational speed of the

limiting

U-axis will be adjusted to the corner setting.

angular velocity

U-axis rotation speed at corner

Height compensation

Cutting height compensation when going around corners

Corner air pressure

Air pressure when cutting corners

Corner power

The power used for cutting corners is not the same as the power used for cutting end faces.

Corner frequency

Corner light emission frequency

Corner duty cycle

The laser's output duty cycle is set during cutting; it's the ratio of output time to total time within one output cycle . A higher value results in higher average output 179

XC3000 T2.0 Series Laser Cutting System User Manual power. 100% can be considered as average power equal to peak power.

4.5 Power Curve The laser energy output curve can be enabled by selecting the corresponding checkboxes: There are two power-speed curves: duty cycle and frequency. Users can freely select and combine them. It is recommended to only enable the duty cycle curve. The line has a noticeable effect and is relatively easy to adjust.

Click the curve editing button to enter the curve editing interface for editing, as shown in the following figure:

180

XC3000 T2.0 Series Laser Cutting System User Manual

The power control curve in this software is fitted using a spline curve method, with the horizontal axis representing velocity and the vertical axis representing laser output, exhibiting high performance. The smoothness of the curves. Readers can select the editing interface for three curves in the tabs above. Below is an example from the image above: when the speed is 0%. The duty cycle is 50%; at a speed of 20%~30%, the duty cycle is 60%; at a speed of 60%, the duty cycle is 90%; and at a speed of 90%, the duty cycle is 100%. For example, in a machining process, the duty cycle is 100% at a cutting speed of 10m/min; 60% at a cutting speed of 2~3m/min; and 100% at a cutting speed of 9~10m/min. The software's default power curve can meet most conventional machining needs, so customers can make minor adjustments based on the software's default curve.

4.6 Perforation Perforation parameters Parameter name

default

Remark

value

181

XC3000 T2.0 Series Laser Cutting System User Manual Perforation method

Standard piercing, progressive piercing, multi-stage piercing

Perforation height

During piercing, the height of the nozzle from the pipe

Perforation time

Perforation power

Peak output power of the laser during perforation

Perforation frequency

Set the light emission frequency of the perforation.

Duty cycle

The laser output duty cycle is set during perforation, which is the ratio of the output time to the total time in one output cycle . The larger the value, the higher the average output power. 100% can be considered as the average power equal to the peak power.

Perforation pressure

Gas pressure during perforation

Perforated gas

The gases used during perforation are oxygen, nitrogen, and air.

Stop the light and blow

After perforation, the time spent blowing air without

air

light is used to cool the pipe.

focus

Setting the starting point and focus when perforating

4.7 Remarks In the remarks interface, users can enter information to note precautions and other relevant details about the current process, such as the current nozzle size and focus.

182

XC3000 T2.0 Series Laser Cutting System User Manual

4.8 Import/Export Import or export the process parameters for this layer. Note: This button will only import or export the process parameters for the current process layer. Export. For example, if a customer uses two layers, a large outline and a medium outline, and clicks the export button in the large outline process interface to save the process,... Only the machining processes within the large outline will be exported. To save the processes within the medium outline, please go to the medium outline interface and click the export button to save them here. Simply save it. Importing is the same, so I won't go into details here .

4.9 Material Library Configuration Click the Material Library Configuration button on the process interface to bring up the Material Settings dialog box, as shown in the following figure: 1) The existing materials list approximately 7 types. If you need to add other types of materials, please refer to method a below. 2) Modification: To modify the name of existing materials, please refer to method b below. 3) Delete: Delete materials from the list.

a） In the material addition and modification section, select "Add New" and fill in the ID and name. Note that the existing material name cannot be the same as one already existing in the material list, as shown in the image below:

183

XC3000 T2.0 Series Laser Cutting System User Manual

b） To existing material, whose name you click "Modify" as below:

change the name of an click on the material want to change, then shown in the image

V. Common Alarm Handling Methods 5.1 Collision alarm Scenario 1 Handling Method: Confirm whether the cutting head is hitting the plate. If the cutting head hits the plate, the software will issue a "plate hit alarm". Simply use the wireless handheld device or the software interface to lift the cutting head away from the plate. Then, click "Alarm Cancel" in the software. 184

XC3000 T2.0 Series Laser Cutting System User Manual If a plate hit occurs during the cutting process, the cutting head will automatically lift up. Click "Alarm Cancel" in the software and then click the "Start" button to continue processing, as shown in the figure below.

Scenario 2 Handling Method: If the "Alarm Clear" function cannot clear the "Alarm Collision" on the software interface even though the cutting head has not collided with the plate, we can clear the alarm by resetting the capacitance value. First, find the main software interface, click the calibration drop-down box on the CNC interface, find the capacitance sensor and click to enter, then find the reset capacitance and click "Reset Capacitor". According to the prompt, you need to perform automatic calibration again, as shown in the figure below.

185

XC3000 T2.0 Series Laser Cutting System User Manual

186

XC3000 T2.0 Series Laser Cutting System User Manual

5.2 Sensor not connected, data cable broken alarm Solution: ①. When the cutting head is stationary, observe whether the capacitance value on the software's production interface changes dynamically and whether the change is within the normal range. (The normal capacitance value change is within 100. If it exceeds the normal value, troubleshooting should be performed as follows.) ②. Check if the cutting head nozzle is loose. ③. Check if the connection between the amplifier and the TTW cable is loose or if there is dust at the cable interface causing poor contact. If necessary, blow air to remove the dust. ④. If the alarm persists even after trying the above methods, please contact the machine tool manufacturer for assistance.

5.3 Communication network failure Solution: 1. Use the hardware information in the diagnostic tool to check which slave station communication is interrupted. Then check if the corresponding slave station hardware has any alarms, or check if the network cable or control line of the communication interrupted hardware is loose. In the hardware communication interface, we can see an "op status" column. When "op" is displayed, the communication is normal. If "op" is not displayed, the communication is abnormal and the hardware communication needs to be checked, such as whether the servo has any alarms, and whether the network cable is loose. If the driver has an alarm, the servo needs to be powered off and restarted once. After that, you can clear the alarm by clicking "clear alarm" in the wireless handheld device or software interface. 2. If the slave station displays an EDS3000 module communication interruption, you need to exit the system, check the option to restart the kernel, and then re-enter the software to try to resolve the issue, as shown in the image below.

187

XC3000 T2.0 Series Laser Cutting System User Manual

5.4 Network communication failure/network communication interruption The system has automatically disabled the enable function; a reset operation must be performed. Solution: 1. This alarm indicates a communication failure. Please check if the network cable or servo control cable is loose, or check if the servo power is on. 2. Exit the system (you need to check the option to restart the kernel) and then restart the system.

5.5 Capacitive sensor is offline/TRA wire is broken or lower end is detached Solution: 1. Check if the amplifier and the TTW line at the bottom are disconnected or have poor contact. 2. Check if the sensor cable and laser head connector are securely connected. 3. Check if the nozzle has been impacted and if the ceramic ring is broken. 3. Reset the capacitor to see if the alarm is cleared. If it is not cleared, please contact the manufacturer. 188

XC3000 T2.0 Series Laser Cutting System User Manual

5.6 Follow-up jitter/follow-up overshoot phenomenon Solution: 1. Check the servo parameters: is the stiffness and inertia ratio too low, causing servo overshoot? 2. Check if the values obtained from servo self-tuning are within the required range. 3. Check if the capacitor value fluctuates too much after enabling, causing it to bounce back and forth after moving to the tube surface.

5.7 Large fluctuations in capacitance value Solution: 1. Does the machine tool have a grounding wire? Are the grounding wire stakes standard and compliant? 2. Are the high-voltage and low-voltage circuits of the machine tool separated? Is the power supply of the driver filtered? 3. Is the diode connected to the solenoid valve as specified? 4. For relay-controlled servo brakes, is the brake power supply a separate power source?

5.8 Motion axis alarm tracking error Solution: 1. Confirm that the pitch and pulse settings are correct. 189

XC3000 T2.0 Series Laser Cutting System User Manual 2. Is the servo parameter setting a pulse + direction positive logic? 3. Check for any unusual noises or mechanical jamming when the enable is off.

4. For drives above 1kW with very high speed settings, if a sudden overload or overcurrent occurs, causing an alarm and a software alarm indicating a tracking error, check if a braking resistor is added to the drive. For drives above 1kW, it is best to add a 300W braking resistor of about 50 ohms .

190

XC3000 T2.0 Series Laser Cutting System User Manual

191

BS03K-CAT SERIES 3kW Smart Laser Cutting Head - User Manual

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

Document History Edit date

Version

2024/3/6

V1.0

Topic, revision, action taken First edition

Thank you for choosing our product! This manual describes the installation and commissioning of laser cutting head in details so that you can use this product quickly. You can consult us directly for more details. Due to the continuous updating of product functions, the product you receive may differ from the introduction in this manual in some aspects. We reserve all rights in this document including the issued patents and other registered commercial ownership related to this document. It is strictly prohibited to use this document in an improper way especially to copy and disseminate it to third parties. If you find any errors in this document, please inform us as soon as possible. The data contained in this manual is only used to describe the product and shall not be regarded as a statement of security interest. For the benefit of our customers, we will constantly try to ensure that the products we develop comply with the latest technology.

Raytools AG Email: sales@raytools.com Website: www.raytools.ch

V1.0

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

Disclaimer ▪

We reserve the right to change the design in order to improve the quality or expand the application or comply to manufacturing workmanship.

▪

We will not bear any responsibility for losses and accidents caused by wrong operation or improper handling of our products.

▪

Dismantling of product will lose all warranty claims excluding the normal replacement of worn parts and components required for maintenance or commissioning operations.

▪

Unauthorized modification of products or use of non-original spare parts will directly lead to the invalidation of warranty and liability exemption.

▪

It is recommended to only use the spare parts provided by us or submit them to us or the designated professional team for installation.

Use Regulations ▪

Ensure that the product is used in a dry environment.

▪

Ensure that the product is used in the environment required by EMC standards.

▪

The product is only allowed to run within the parameters specified in the technical data.

▪

Be familiar with the basic provisions of work safety & accident prevention and have received equipment

Personnel Responsibilities operation guidance. ▪

Read and understand basic safety instructions and operations.

▪

You must have studied the relevant regulations and safety instructions and understand the possible hazards.

▪

V1.0

Comply with relevant regulations and implement corresponding protective measures.

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

Safety Instructions Prevent Electric Shock ▪

Parts of the laser head such as nozzle, sensor, sensor interface and attached fasteners may not be fully protected by the ground wire due to function fault. These parts may have low voltage. When installing electrical equipment, please pay attention to taking anti electric shock measures for relevant personnel.

▪

Note that the equipment shall be grounded as specified.

Guard against Danger ▪

Never put your hands or other body under the laser head.

▪

Repair and maintenance work can only be carried out after the power is turned off.

▪

Do not exceed the specified maximum pressure.

▪

It must be ensured that the laser head is in normal condition at all times.

▪

All fasteners such as bolts and nuts must be tightened.

Laser Caution ▪

Avoid direct laser radiation or scattering to the skin.

▪

Do not stare at the laser beam even when wearing optical equipment.

▪

Use special laser protective eyeglasses that meet the requirements of safety standards IEC 60825-1.

Prevent Waterway Corrosion ▪

In order to avoid corrosion, use the specified coolant and comply with relevant requirements and specified maintenance intervals.

Noise Prevention ▪

The corresponding measures shall be specified or explained and observed in order to prevent personnel from being harmed by noise when the cutting air pressure is high.

Storage and Transportation

V1.0

▪

Observe the storage temperature range allowed by the technical data.

▪

Take reasonable measures to prevent fire, vibration or impact.

▪

Do not store in or near the magnetic field.

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

Contents 1 Product Summary ................................................................................................................... 1 1.1 View (with QBH Interface) .................................................................................................... 1 1.2 Monitoring ............................................................................................................................ 2 1.3 LED ........................................................................................................................................ 2 1.4 Technical Datasheet .............................................................................................................. 3 1.5 Mechanical Size .................................................................................................................... 4 1.6 Physical Interface .................................................................................................................. 5 2 Mechanical Installation ........................................................................................................... 6 2.1 Fiber Insertion ...................................................................................................................... 6 2.2 Mounting of Laser Cutting Head .......................................................................................... 7 2.3 Earthing of Laser Cutting Head ............................................................................................. 8 2.4 Inspection of Top Cover Glass (1st Installation/Replacement of Fiber) ................................ 9 2.5 Connection of Cooling Water and Assist Gas ..................................................................... 10 3 System Installation and Commissioning ............................................................................... 13 4 Beam Alignment.................................................................................................................... 15 5 Maintenance ......................................................................................................................... 16 5.1 Cleaning Lens ...................................................................................................................... 16 5.2 Removal and Installation of Lenses .................................................................................... 17 5.3 Replace Ceramic Body and Nozzle ..................................................................................... 19

V1.0

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

1 Product Summary 1.1 View (with QBH Interface)

1 Fiber Interface

7 Water Cooling Interface (⌀6)

2 LED

8 Control Interface

3 Focus Module/XY Alignment

9 Cutting Gas Interface (⌀10)

4 Bottom Cover Glass Assy

10 Nozzle Cooling Gas Interface (⌀8)

5 Preamplifier Interface

11 Retaining Ring

6 TRA (Nozzle Assy)

V1.0

12 Ceramic Body & Nozzle

1 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

1.2 Monitoring

Bottom cover glass temperature

Cutting gas pressure

Cutting gas temperature

Motor

1.3 LED LED Status Definition (from top to bottom) LED1: Green on-running normally Red on-foucs failed LED2: Green on-running normally Red on- The slave is not connected or has not entered the OP state.

V1.0

2 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

1.4 Technical Datasheet Model

BS03K

Wavelength

1080nm

Fiber Interface

QBH

Power Rating

3kW

Collimation Length (fC)

100mm

Focusing Length (fF)

150mm

NA max

0.13

Auto Focus Range

-22mm…+22mm

Beam Alignment Range

-1.5mm…+1.5mm

Mounting Size of Cutting Head

4xM6

Mounting Size of Preamplifier

4xM3

Cutting Gas

⌀10, max. 25bar

Nozzle Cooling Gas

⌀8, max. 5bar

Water Cooling

⌀6, max. 5bar, min. 1.5L/min

Operating Voltage

24V±10%, max. 4A

I/O Interface (19-Pin)

Output current must be less than 30mA

Operating Temperature

5℃～55℃

Humidity

30％～95％, without condensing

Weight

About 5kg

V1.0

3 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

1.5 Mechanical Size Optical Configuration:100:150

V1.0

4 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

1.6 Physical Interface

V1.0

No. 1

Cooling water (⌀6)

No. 2

Cutting gas (⌀10)

No. 3

Nozzle cooling gas (⌀8)

No. 4

Preamplifier (SMA)

5 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

2 Mechanical Installation 2.1 Fiber Insertion WARNING: The optical components must be dust free and all dusts must be cleaned before use. The fiber shall be horizontally inserted into fiber interface to prevent dust from entering the interface and falling on the surface of the lens. Upper limit in the fiber before fixing the laser head.

2.1.1 QBH Fiber Insertion

▪

Align the red point at the end of the QBH interface to the red point of the handwheel.

▪

Remove QBH dustproof cover.

▪

Align the red mark of male fiber end to red mark on female QBH of cutting head when you insert the fiber end straightly to bottom of QBH interface of cutting head.

▪

Turn the QBH handwheel clockwise. It is in place when you hear the "Da" voice, then pull the handwheel up and turn clockwise to end.

It is recommended to use textured tape to seal the connection of female and male fiber interface after the installation is finished in order to prevent from dust as much as possible in critical dusty environment.

V1.0

6 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

2.2 Mounting of Laser Cutting Head The mounting of laser cutting head to machine tool is shown as below. Customers are advised to Install the laser head perpendicular to the bed surface as requested and make sure the laser head is locked, which is one of the premises to ensure the stable cutting.

thru

V1.0

7 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

2.3 Earthing of Laser Cutting Head

Earthing

The shaking or vibration of cutting head due to incorrect earthing could cause damage to sensor mechanism and machine.

V1.0

8 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

2.4 Inspection of Top Cover Glass (1st Installation/Replacement of Fiber) Maintenance or Repair shall be implemented at dust free workstation.

▪

Loose bolts (item 1 & 2) and pull out the glass holder until you see the complete cover glass.

▪

Seal the openings of cutting head by textured tape immediately.

▪

Check if the top cover glass is clean. If not, blow the cover glass by clean compressed air until it is clean.

The cover glass shall be replaced if it cannot be cleaned or a damage happens.

V1.0

9 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

2.5 Connection of Cooling Water and Assist Gas 2.5.1 Connection of Cutting Gas

The impurity in cutting gas such as hydrocarbon and steam will damage the lens and cause cutting power fluctuation as well as inconsistencies between the sections of the work piece. The table below is the recommended cutting gas specification. The higher the purity of the gas, the better the quality of the cutting section. Impurity can be filtered out in gas supply tube, but Oxygen and water vapor can permeate light path through nonmetal materials, which is the source of the appearance of dust and hydrocarbon. Stainless steel fittings are recommended, at the same time must use filters which can remove a minimum of 0.01 micron particle to purify. A pressure gauge with a stainless steel diaphragm is recommended. Industrial pressure gauges suck in air. Rubber diaphragm produce hydrocarbon by aging or other factors.

Gas

Purity

Maximum content of water vapor

Oxygen

99.5%

<5 ppm

<1 ppm

Nitrogen

99.95%

<5 ppm

<1 ppm

Diameter of cutting gas

Maximum content of hydrocarbon

⌀10mm (G)

pipe (Outer diameter) Gas Pressure

Max. 25bar (2.5MPa)

CAUTION: Gas interface cannot be replaced arbitrarily especially do not use PTFE TAPE. Otherwise the gas path will be blocked and cannot do normal cutting which will damage cutting head at the same time.

V1.0

10 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

2.5.2 Connection of Nozzle Cooling Gas

Dried N2 or fine filtered air is recommended for nozzle cooling. The O2 is prohibited for nozzle cooling. Gas type

N2 or Air (dried and fine filtered)

Gas pressure

Max. 5bar (0.5MPa)

Gas interface

⌀8

V1.0

11 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

2.5.3 Connection of Cooling Water

It is important to note that when the laser power is greater than 500W, it is recommended to use water cooling. The recommended water flow is suggested below. ▪

V1.0

W1 & W2: cooling pipe of fiber interface

Outer diameter of water hose

⌀6mm

Minimum flow speed

1.5 l/min

Entry pressure

170-520kPa (30-60 psi)

Entry temperature

≥room temperature /＞dew point

Hardness (relative to CaCO3)

＜250mg/liter

PH range

6 to 8

Particle size allowed

Diameter less than 200 microns

12 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

3 System Installation and Commissioning

EPOE24

V1.0

Mark

Item

Definition

Input interface

Input signal

OUT

Output interface

Output signal

24V

Connect to 24V

GND

Connect to 0V

Earthing

13 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

⚫

Connect the 24V to the I/O board (EPOE24).

⚫

Connect cables as required.

⚫

Configure and debug system setting according to the manual.

Raytools system setting:

V1.0

14 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

4 Beam Alignment Cutting quality in a great extent depends on whether the lens is in the middle. If the lens is not in the middle, the laser beam may contact with nozzle or inner wall to produce high temperature deformation. Lens alignment operation should be considered when nozzle is replaced or the cutting quality declines. Lens alignment of laser cutting head can be finished by adjusting focus lens, X-Y direction. The X/Y adjusting knob is located above bottom cover glass as shown below. Adjusting the 2 knobs until the beam is located in the middle of nozzle. Make sure the laser beam output from the center of nozzle. A method commonly used is tape dotting method as below: ▪

Fix the cutting head with a big size nozzle (tip size shall be larger than beam size) or adjust to nearly zero focus.

▪

Pick a scotch tape, flatten it and stick it to the nozzle tip.

▪

Open the red light of the laser. Find and observe the position of red light in the scotch tape.

▪

Shoot laser at low power to check beam penetration size. Beam penetration shall be circle and located in the nozzle tip center.

▪

Adjust the 2 X/Y adjusting knobs to get beam aligned. The max X/Y adjusting range is roughly from -1.5mm to +1.5mm.

▪

Tear off the tape and check the shooting hole position in tape.

▪

Repeat the above steps to find out relatively centered position.

Figure 4.1— Beam Adjustment V1.0

15 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

5 Maintenance 5.1 Cleaning Lens It’s necessary to maintain lenses regularly because of the characteristic of laser cutting process. Cleaning to the cover glass once a week is recommended. The collimating lenses and focusing lenses are recommended to be cleaned once every 2~3 months. In order to facilitate the maintenance of the cover glass, the cover glass holder adopts a drawer type structure. Tools: Dust-proof gloves or fingertip, polyester swab, absolute ethanol, rubber gas blow (purely compressed air). Cleaning instruction: ▪

To put fingertip onto left thumb and index finger.

▪

Spray absolute ethanol onto the polyester swab.

▪

Hold the edge of the lens with left thumb and index finger gently. (note: avoid touching the surface of the lens by fingertip in case of trace)

▪

Hold the lens to face eyes by left hand and hold the polyester swab by right hand. Wipe the lens gently in single direction, from bottom to top or from left to right (Should not wipe back and forth in case of secondary pollution to lens) and use rubber blow (purely compressed air) to blow the surface of the lens. Both surfaces should be cleaned. After cleaning, make sure that there is no residual like detergent, floating ash, foreign matters and impurities.

V1.0

16 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

5.2 Removal and Installation of Lenses The whole process needs to be completed in a dust free room. Wear dust-proof gloves or fingertips when removing or installing the lenses. 5.2.1 Removal and Installation of Bottom Cover Glass/Protection Glass The cover glass is wearing part which needs to be replaced once it is damaged.

▪

As shown above, loose the 2 bolts to pull out cover glass holder by pinching 2 edges of drawer type holder.

▪

Seal the mounting openings by textured tape immediately.

▪

Remove the pressing ring (1) and cover glass (2) after wearing fingertips

▪

Clean the cover glass holder and seal ring (3). The elastic seal ring (3) should be replaced if it is damaged.

▪

Install the cleaned or new cover glass (regardless of the front or back surface) into the holder of cover glass.

▪

Install the pressing ring.

▪

Insert the cover glass holder back to the laser head and tighten the bolts.

It is not allowed to pull out the edge of seal ring directly as it is very easy to damage the seal ring. Please wear the clean gloves or fingertips. V1.0

17 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

5.2.2 Removal and Installation of Middle Cover Glass/Protection Glass The cover glass is wearing part which needs to be replaced once it is damaged.

▪

As shown above, loose the 2 bolts to pull out cover glass holder by pinching 2 edges of drawer type holder.

▪

Seal the mounting openings by textured tape immediately.

▪

Remove the pressing ring (1) and cover glass (2) after wearing fingertips

▪

Clean the cover glass holder and seal ring (3). The elastic seal ring (3) should be replaced if it is damaged.

▪

Install the cleaned or new cover glass (regardless of the front or back surface) into the holder of cover glass.

▪

Install the pressing ring.

▪

Insert the cover glass holder back to the laser head and tighten the bolts.

It is not allowed to pull out the edge of seal ring directly as it is very easy to damage the seal ring. Please wear the clean gloves or fingertips.

V1.0

18 |19

BS03K-CAT SERIES 3kW Smart Laser Cutting Head-User Manual

5.3 Replace Ceramic Body and Nozzle

The nozzle is required to be replaced if it gets crash or damaged by laser beam. The dirt on ceramic body is required to be cleaned or to replace the ceramic body if it gets crash. ▪

Unscrew the nozzle (1).

▪

Press the ceramic body (3) upward by hand to make it fixed without deflection and then unscrew the retaining ring (2).

▪

Align the pin hole of the new ceramic body with the locating pin. Press the ceramic body (3) upward by hand and tighten the retaining ring (2).

▪

Screw the new nozzle (1) and get it properly tightened.

▪

Do the capacitance calibration once again after replacing the nozzle or ceramic body.

Only tighten the nozzle and retaining ring by hand (without tools) otherwise it could damage the ceramic body. Keep the contact surface of all parts clean.

V1.0

19 |19

BS06K CAT SERIES 6kW Smart Laser Cutting Head - User Manual

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

Document History Edit date

Version

2025/2/10

V1.0

Topic, revision, action taken First edition

Empower Technologies (Shanghai) Co., Ltd. Email: sales@raytools.com Website: www.empower.cn

V1.0

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

Disclaimer ▪

We reserve the right to change the design in order to improve the quality or expand the application or comply to manufacturing workmanship.

▪

We will not bear any responsibility for losses and accidents caused by wrong operation or improper handling of our products.

▪

Dismantling of product will lose all warranty claims excluding the normal replacement of worn parts and components required for maintenance or commissioning operations.

▪

Unauthorized modification of products or use of non-original spare parts will directly lead to the invalidation of warranty and liability exemption.

▪

It is recommended to only use the spare parts provided by us or submit them to us or the designated professional team for installation.

Use Regulations ▪

Ensure that the product is used in a dry environment.

▪

Ensure that the product is used in the environment required by EMC standards.

▪

The product is only allowed to run within the parameters specified in the technical data.

Personnel Responsibilities ▪

Be familiar with the basic provisions of work safety & accident prevention and have received equipment operation guidance.

▪

Read and understand basic safety instructions and operations.

▪

You must have studied the relevant regulations and safety instructions and understand the possible hazards.

▪

V1.0

Comply with relevant regulations and implement corresponding protective measures.

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

Safety Instructions Prevent Electric Shock ▪

▪

Note that the equipment shall be grounded as specified.

Guard against Danger ▪

Never put your hands or other body under the laser head.

▪

Repair and maintenance work can only be carried out after the power is turned off.

▪

Do not exceed the specified maximum pressure.

▪

It must be ensured that the laser head is in normal condition at all times.

▪

All fasteners such as bolts and nuts must be tightened.

Laser Caution ▪

Avoid direct laser radiation or scattering to the skin.

▪

Do not stare at the laser beam even when wearing optical equipment.

▪

Use special laser protective eyeglasses that meet the requirements of safety standards IEC 60825-1.

Prevent Waterway Corrosion ▪

In order to avoid corrosion, use the specified coolant and comply with relevant requirements and specified maintenance intervals.

Noise Prevention ▪

The corresponding measures shall be specified or explained and observed in order to prevent personnel from being harmed by noise when the cutting air pressure is high.

Storage and Transportation

V1.0

▪

Observe the storage temperature range allowed by the technical data.

▪

Take reasonable measures to prevent fire, vibration or impact.

▪

Do not store in or near the magnetic field.

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

Contents 1 Product Summary ................................................................................................................... 1 1.1 Structure (with QBH Interface) ............................................................................................. 1 1.2 Monitor................................................................................................................................. 2 1.3 LED ........................................................................................................................................ 2 1.4 Technical Datasheet .............................................................................................................. 3 1.5 Mechanical Size .................................................................................................................... 4 1.6 Physical Interface .................................................................................................................. 6 2 Mechanical Installation ........................................................................................................... 7 2.1 Fiber Insertion ...................................................................................................................... 7 2.2 Mounting of Laser Cutting Head .......................................................................................... 8 2.3 Earthing of Laser Cutting Head ............................................................................................. 9 2.4 Inspection of Top 1 Cover Glass (1st Installation/Replacement of Fiber) ........................... 10 2.5 Connection of Cooling Water and Assist Gas ..................................................................... 11 3 System Installation and Commissioning ............................................................................... 14 4 Beam Alignment and Zero Focus Correction ........................................................................ 16 4.1 Beam Alignment ................................................................................................................. 16 5 Maintenance ......................................................................................................................... 17 5.1 Cleaning Lens ...................................................................................................................... 17 5.2 Removal and Installation of Bottom 1 and 2 Cover Glass/Protection Glass ...................... 18 5.3 Replace Ceramic Body and Nozzle ..................................................................................... 20

V1.0

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

1 Product Summary 1.1 Structure (with QBH Interface)

V1.0

1 Fiber Interface

8 Control Interface

2 Top 1 Cover Glass

9 Water Cooling Interface (⌀6)

3 Focus Module/XY Alignment

10 Cutting Gas Interface (⌀10)

4 Bottom 1 Cover Glass Assy

11 Nozzle Cooling Gas Interface (⌀8)

5 LED

12 Preamplifier Interface

6 TRA (Nozzle Assy)

13 Water Cooling Interface (⌀6)

7 Water Cooling Interface (⌀6)

14 Ceramic Body & Nozzle

7 Water Cooling Interface (⌀6)

15 Retainer ring

1 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

1.2 Monitor         

Focus lens temperature Top 1/bottom 1 cover glass temperature Stray beam of bottom 1 cover glass Dew point temperature and humidity Signal of bottom 1 cover glass ready status and side collision Cutting gas pressure and cavity pressure TTA (built-in capacitance amplifier) temperature and capacitance Input focus and output focus Firmware version and FPGA version

1.3 LED

LED Status Definition (from left to right) LED No. LED 1 (POWER) LED 2 (RUN)

LED 3 (LINK)

V1.0

LED Status

Status Definition

Green on

Power normal

Red on

Power abnormal

Light off

Power disconnected

Green on

Motor normal

Green blink

Motor disabled

Red on

Motor fault

Green on

Normal EtherCAT communication

Green blink

Master PC configuration error

Red on

Communication error/Firmware upgrading

Light off

EtherCAT disconnected

Green on

Sensors running normally

LED 4

Green blink

Sensor precaution

(SENSEOR)

Red blink

Sensor alarm

Light off

Sensor offline or error

2 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

1.4 Technical Datasheet Model

BS06K CAT

Wavelength

1080nm

Fiber Interface

QBH/G5

Power Rating

6kW

Collimation Length (fC)

100mm

Focusing Length (fF)

150/200mm

NA max

0.13

Auto Focus Range

-17.6mm…+17.6mm (FL150mm) -32mm…+32mm (FL200mm)

Beam Alignment Range

-1.5mm…+1.5mm

Mounting Size of Cutting Head

4xM6

Mounting Size of Preamplifier

4xM3

Cutting Gas

⌀10, max. 25bar

Nozzle Cooling Gas

⌀8, max. 5bar

Water Cooling

⌀6, max. 5bar, min. 1.5L/min

Operating Voltage

24V±10%, min. 3A

I/O Interface (8-Pin)

Output current must be less than 30mA

Operating Temperature

5℃～55℃

Humidity

30％～95％, without condensing

Weight

About 5kg

V1.0

3 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

1.5 Mechanical Size Optical Configuration: 100:150

V1.0

4 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

Optical Configuration: 100:200

V1.0

5 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

1.6 Physical Interface

V1.0

No. 1

Cooling water (⌀6)

No. 4

Preamplifier (SMA)

No. 2

Cooling water (⌀6)

No. 5

Nozzle cooling gas (⌀8)

No. 3

Cutting gas (⌀10)

No. 6

Cooling water (⌀6)

6 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

2.1.1 QBH Fiber Insertion

▪

Align the red point at the end of the QBH interface to the red point of the handwheel.

▪

Remove QBH dustproof cover.

▪

Align the red mark of male fiber end to red mark on female QBH of cutting head when you insert the fiber end straightly to bottom of QBH interface of cutting head.

▪

Turn the QBH handwheel clockwise. It is in place when you hear the "Da" voice, then pull the handwheel up and turn clockwise to end.

V1.0

7 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

Thru

Rev

V1.0

8 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

2.3 Earthing of Laser Cutting Head

Earthing

The shaking or vibration of cutting head due to incorrect earthing could cause damage to sensor mechanism and machine.

V1.0

9 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

2.4 Inspection of Top 1 Cover Glass (1st Installation/Replacement of Fiber) Maintenance or Repair shall be implemented at dust free workstation.

▪ As shown above, loose the bolts (1 &2) to pull out cover glass holder by pinching 2 edges of drawer type holder. ▪ Seal the mounting openings by textured tape immediately. ▪ Remove the pressing ring and cover glass after wearing fingertips. ▪ Clean the cover glass holder. ▪ Install the cleaned or new cover glass (regardless of the front or back surface) into the holder of cover glass. ▪ Install the pressing ring. ▪ Insert the cover glass holder back to the laser head and tighten the bolts. The cover glass shall be replaced if it cannot be cleaned or a damage happens.

V1.0

10 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

2.5 Connection of Cooling Water and Assist Gas 2.5.1 Connection of Cutting Gas

Gas

Purity

Maximum content of water vapor

Oxygen

99.5%

<5 ppm

<1 ppm

Nitrogen

99.95%

<5 ppm

<1 ppm

Diameter of cutting gas

Maximum content of hydrocarbon

⌀10mm (G)

pipe (Outer diameter) Gas Pressure

Max. 25bar (2.5MPa)

V1.0

11 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

2.5.2 Connection of Nozzle Cooling Gas

Dried N2 or fine filtered air is recommended for nozzle cooling. The O2 is prohibited for nozzle cooling. Gas type

N2 or Air (dried and fine filtered)

Gas pressure

Max. 5bar (0.5MPa)

Gas interface

⌀8

V1.0

12 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

2.5.3 Connection of Cooling Water

It is important to note that when the laser power is greater than 500W, it is recommended to use water cooling. The recommended water flow is suggested below.

V1.0

▪

Water In: W2

▪

Chain Connection: W1-W3-W4-W5

▪

Water Out: W6

Outer diameter of water hose

⌀6mm

Minimum flow speed

1.5 l/min

Entry pressure

170-520kPa (30-60 psi)

Entry temperature

≥room temperature /＞dew point

Hardness (relative to CaCO3)

＜250mg/liter

PH range

6 to 8

Particle size allowed

Diameter less than 200 microns

Conductivity

≤10us/cm

13 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

3 System Installation and Commissioning

EPOE24 Description: Item

Item

Definition

Input interface

Signal input

OUT

Output interface

Signal output

24V

Power supply 24V

24V to power supply

GND

Power supply 0V

0V to power supply

Earthing

Note: 1. Connect 24V to IO (EP0E24). 2. Wiring according to the above graphic. 3. Configure and commission the system according to the system instruction.

V1.0

14 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

After the wiring is completed, enter the system setting. The following parameters are for reference. Empower system setting: Optical configuration: 100:150

Optical configuration: 100:200

The connections and settings may differ from one CNC control system to another. Once the setting is modified, the corresponding wiring method may need to be changed.

V1.0

15 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

4 Beam Alignment and Zero Focus Correction 4.1 Beam Alignment Cutting quality in a great extent depends on whether the lens is in the middle. If the lens is not in the middle, the laser beam may contact with nozzle or inner wall to produce high temperature deformation. Lens alignment operation should be considered when nozzle is replaced or the cutting quality declines. Lens alignment of laser cutting head can be finished by adjusting focus lens, X-Y direction. The X/Y adjusting knob is located above bottom cover glass as shown below. Adjusting the 2 knobs until the beam is located in the middle of nozzle. Make sure the laser beam output from the center of nozzle. A method commonly used is tape dotting method as below: ▪

Fix the cutting head with a big size nozzle (tip size shall be larger than beam size) or adjust to nearly zero focus.

▪

Pick a scotch tape, flatten it and stick it to the nozzle tip.

▪

Open the red light of the laser. Find and observe the position of red light in the scotch tape.

▪

Shoot laser at low power to check beam penetration size. Beam penetration shall be circle and located in the nozzle tip center.

▪

Adjust the 2 X/Y adjusting knobs to get beam aligned. The max X/Y adjusting range is roughly from -1.5mm to +1.5mm.

▪

Tear off the tape and check the shooting hole position in tape.

▪

Repeat the above steps to find out relatively centered position.

Figure 4.1— Beam Adjustment

V1.0

16 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

To put fingertip onto left thumb and index finger.

▪

Spray absolute ethanol onto the polyester swab.

▪

Hold the edge of the lens with left thumb and index finger gently. (note: avoid touching the surface of the lens by fingertip in case of trace)

▪

V1.0

17 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

5.2 Removal and Installation of Bottom 1 and 2 Cover Glass/Protection Glass The whole process needs to be completed in a dust free workstation. Wear dust-proof gloves or fingertips when removing or installing the lenses. 5.2.1 Removal and Installation of Bottom 1 Cover Glass/Protection Glass The cover glass is wearing part which needs to be replaced once it is damaged.

▪

As shown above, loose the bolt, take off the glass cover and pull out the glass holder by pinching 2 edges of drawer type holder.

▪

Close the cover panel immediately.

▪

Remove the pressing ring (1) and cover glass (2) after wearing fingertips.

▪

Clean the cover glass holder and seal ring (3). The elastic seal ring (3) should be replaced if it is damaged.

▪

Install the cleaned or new cover glass (regardless of the front or back surface) into the holder of cover glass.

▪

Install the pressing ring.

▪

Insert the cover glass holder back to the laser head and tighten the bolts.

It is not allowed to pull out the edge of seal ring directly as it is very easy to damage the seal ring. Please wear the clean gloves or fingertips.

V1.0

18 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

5.2.2 Removal and Installation of Bottom 2 Cover Glass/Protection Glass The cover glass is wearing part which needs to be replaced once it is damaged.

▪

As shown above, loose the bolts (1&2) to pull out cover glass holder by pinching 2 edges of drawer type holder.

▪

Seal the mounting openings by textured tape immediately.

▪

Remove the pressing ring (1) and cover glass (2) after wearing fingertips

▪

Clean the cover glass holder.

▪

Install the cleaned or new cover glass (regardless of the front or back surface) into the holder of cover glass.

▪

Install the pressing ring (1).

▪

Insert the cover glass holder back to the laser head and tighten the bolts.

It is not allowed to pull out the edge of seal ring directly as it is very easy to damage the seal ring. Please wear the clean gloves or fingertips.

V1.0

19 |20

BS06K CAT-SERIES 6kW Smart Laser Cutting Head-User Manual

5.3 Replace Ceramic Body and Nozzle

The nozzle is required to be replaced if it gets crash or damaged by laser beam. The dirt on ceramic body is required to be cleaned or to replace the ceramic body if it gets crash. ▪

Unscrew the nozzle (1).

▪

Press the ceramic body (3) upward by hand to make it fixed without deflection and then unscrew the retaining ring (2).

▪

Align the pin hole of the new ceramic body with the locating pin. Press the ceramic body (3) upward by hand and tighten the retaining ring (2).

▪

Screw the new nozzle (1) and get it properly tightened.

▪

Do the capacitance calibration once again after replacing the nozzle or ceramic body.

Only tighten the nozzle and retaining ring by hand (without tools) otherwise it could damage the ceramic body. Keep the contact surface of all parts clean.

V1.0

20 |20