The Radiator Company Brochure 2026

The Radiator Company

The largest selection of designer radiators and towel rails to suit any home interior.

• Over 52 exclusive and affordable designs.

• Italian design & manufacture.

• Efficient low water content designs saving energy and reducing running costs.

Design Choice

• UK’s largest brochure selection of radiators and towel rails.

• Over 1250 sizes and colours are available from stock, delivered in 48-72 hours.

• Thousands of Made to Order options in over 200 colours and special finishes.

• Sectional Specialists in Steel Multi Column, Aluminium and Cast Iron.

Service

• A dedicated UK Customer Service Team to make your purchase as smooth as possible.

• Order from our network of Plumbing & Heating Merchants including over 500 Showrooms nationwide.

• Free Delivery on all radiators and towel rails to UK mainland Showrooms and Merchants.

• Minimum 10-Year Guarantee on all radiators and towel rails.

• All radiators and towel rails are CE/UKCA approved and certified to BS EN442.

The Radiator Company is a brand of IRSAP, Italy’s leading manufacturer of design led radiators.

Radiators

Sectional Aluminium pages 64-73 / 174-183

Towel

Ellipsis

& Accessories

Technical Details & Prices pages 124-213

To find your local showroom or merchant: 01342 302250 or visit theradiatorcompany.co.uk where you will also find helpful tools such as our heat output (BTU) calculator as well as our curved and sectional radiator builder.

Index page 218

NEW Ancona® Console Table

The classic Ancona® multi column configured in a refined, furniture-style format. Standing 971mm high, the new Ancona® Console Table is ideally proportioned for hallways and entrance areas, or for use as a slim console or side table.

Combining a practical shelf and heat source in one. A choice of solid timber tops in Ash, Oak or Walnut and a selection of 60 radiator colours, allows the Ancona® Console to suit both contemporary and more traditional interiors. All tops are 250mm deep and 25mm thick. White radiators with Ash tops are available from stock, Oak and Walnut tops and painted finishes are made to order.

Available in 3 or 4 column configurations, and a selection of widths the design offers adaptable heat output while retaining the clean lines and balanced symmetry of the Ancona® range. See pages 26-27 and 140-141 for more details.

Console table top options:

NEW Stocked Ancona® Vertical Bench Seat

The Ancona ® Vertical Bench Seat range has been expanded with three new beautifully crafted bench top options: Ash, Oak and Walnut. Each finish brings its own natural character, adding warmth and texture while elevating the architectural presence of the radiator. To make specifying even easier, selected White models paired with Ash bench tops are now available from stock, offering quicker delivery without sacrificing design impact or material quality. See pages 28 and 142-143 for more details.

SMART Electric Lupin and Poppy Towel Rails

Defined by a simple, enduring aesthetic, the Lupin and Poppy Electric ladder rails bring understated design and everyday functionality to bathrooms, kitchens, and utility spaces. The Lupin features a crisp, straight-tube profile, while the Poppy introduces softly curved tubes for a more fluid appearance. Both designs are now supplied with SMART Control as standard, these Wi-Fi connected electric ladder rails allow intuitive app-based control and are Ecodesign compliant, delivering efficient heating through thoughtful, contemporary design See pages 105-107 and 205-207 for more details.

Wi-Fi electronic control

• Voltage-feed 230V 50Hz, 1ph. IEC Class Protection - Class II.

IP Rating - IP44

• Electrical cable length 1200mm

IRSAP NOW App used to control & customise heating from your phone

• A quick start guide and tutorials are all available on the app.

• IRSAP NOW Smart Controller supplied colour matched on white & coloured towel rails, chrome models supplied with a matt black controller.

New Poll Towel Rail & 50mm Duo Valve

Clean, contemporary and highly practical, this new towel rail is crafted from durable steel and designed to bring understated elegance to modern bathrooms. Featuring crisp 30mm square collectors paired with evenly spaced 22mm round cross tubes, the design balances strong architectural lines with a softer, refined profile.

Finished as standard in White RAL 9016, the towel rail is also available in a choice of 23 RAL colours, along with 31 specialist finishes and 6 distinctive feature finishes. This extensive choice allows it to blend seamlessly into calm, neutral interiors or stand out as a subtle design statement, while providing efficient warmth and perfectly warmed towels. See pages 109 and 208 for more details.

Designed with aesthetics in mind, 50mm valves align pipe connections neatly beneath the towel rail, delivering a balanced, symmetrical finish. By discreetly hiding pipework, they create a sleek, uncluttered appearance that enhances contemporary bathroom interiors and elevates the overall installation. See page 121 for more details.

Ancona® - Steel Multi Column

Italy, has earned an outstanding worldwide reputation for being at the leading edge of radiator design, style and practical functionality. Produced in our factory in Italy the Ancona ® range of Steel Multi Column radiators take the classic look of cast iron and combines it with the flexibility of steel; suitable for all interiors. Multiple column depths, heights and widths provide an extensive choice of sizes and outputs to suit any room or location.

Stock pages 10-17

Our stylish and timeless stock Ancona ® Steel Multi Column is held in our UK warehouse for fast delivery. The most popular 2, 3 or 4 column sizes in 5 height options and 3 mounting options are available from stock;

White RAL 9016 delivered in 48-72 hours

Bare Metal Lacquer delivered in 48-72 hours, 2 tinted lacquers in up to 2 weeks

• 6 Feature Finishes: Copper, Textured Anthracite, Pearl Bronze, Vintage Green, Aged Brass and Satin Gold all delivered in up to 2 weeks

• Colour Coordination service, price and lead time on application see page 217

We list all possible combinations on pages 124-133 in the technical section.

Made To Order pages 18-25

The perfect solution, made to order in our Italian factory to fit your requirements.

We offer a vast range of sizes of Ancona Multi Column in 2-6 column options; with 3 different mounting options wall-hung, cast feet or welded feet. Added to this, we have over 188 RAL colours plus 32 special finishes including Bare Metal Lacquer.

Combine all of these choices and you have over 3 million combinations of sizes, colours and mounting options. To help make selection easier please use our online radiator builder, a simple way to select the best size, options and heat requirements for your space.

Ancona® - Finishes & Options

Ancona ® Bare Metal Lacquer finishes pages 16-17

This industrial bare metal finish is hand finished so every radiator is unique. Variations in colour, welding and burnishing marks differ from one section to another and add to the idiosyncrasy of each radiator. Sections are given a clear gloss lacquer protecting the bare metal and enhancing their individuality. We can also apply a tinted lacquer top coat to give extra design options, Copper and Brass (pictured right). See pages 132-133 for full details.

Ancona ® Console Table pages 26-27

Feature Finishes pages 14-15

Painted in the UK, our Feature Finishes give a personal touch to any room. There are 6 exciting options to choose from; Vintage Green, Aged Brass, Satin Gold, Textured Anthracite, Copper and Pearl Bronze. See pages 128-133 for more information.

The classic Ancona® multicolumn radiator reimagined in a refined, furniture-style console. Standing 971mm high, it’s ideal for hallways and entrance areas, combining a practical shelf with efficient heat output. Solid timber tops in Ash, Oak, or Walnut and a choice of 60 colours suit both contemporary and traditional interiors. White radiators with Ash tops are available from stock, with other finishes made to order. See pages 140-141 for sizes and prices.

Ancona ® Bench Seat page 28

The Ancona ® Vertical Bench Seat range has been expanded with three new beautifully crafted bench top options: Ash, Oak and Walnut Each finish brings its own natural character, adding warmth and texture while elevating the architectural presence of the radiator. To make specifying even easier, selected White models paired with Ash bench tops are now available from stock, offering quicker delivery without sacrificing design impact or material quality See pages 142-143 for sizes and prices.

Ancona ® Curved page 29

Fitting a curved Ancona into your bay window or around a curved wall will give a truly bespoke finish to a room. Our range is available wall hung or with welded feet & are available in 188 RAL colours & 31 Special Finishes and Bare Metal Lacquer. Use our curved radiator builder online or view the easy to follow Specification Instructions on our website theradiatorcompany.co.uk

Ancona ® Electric pages 30-31

Our Ancona Electric range is now available in a new Bare Metal Lacquer finish. It combines the classic Ancona look with the convenience of a fully controllable electric element operated via an IR remote control. Function modes include a customisable weekly programme, Adaptive Start-up Control, child lock, comfort, Eco, antifreeze, holiday and standby modes, plus open window detection and pilot wire compatibility for home automation. See page 145 for sizes and prices.

® Ancona is a registered trademark of IRSAP UK Limited.

Ancona® - Stock

Ancona ® Stock radiators are incredibly versatile with literally hundreds of possible sizes in 2, 3 or 4 columns from 3-40 sections, in a choice of 3 mounting options (Slip-on Feet, Cast Feet or 2 types of Wall Brackets) all available from stock. Prices from

Please visit our sectional radiator builder online at theradiatorcompany.co.uk.

Design

Ancona ® from stock, our stylish & timeless Ancona ® Steel Multi Column is held in our UK warehouse for fast delivery.

• White RAL 9016 delivered in 48-72 hours

Bare Metal Lacquer delivered in 48-72 hours, 2 tinted lacquers delivered in up to 2 weeks see pages 132-133

• Feature Finishes; Copper, Pearl Bronze, Textured Anthracite, Vintage Green, Satin Gold, Aged Brass delivered in up to 2 weeks

• 2, 3 & 4 column options

5 heights; 300mm, 500mm, 600mm, 750mm & 1800mm

• 3 mounting options; Slip-on Feet, Wall Brackets & Cast Feet

• Up to 40 pre-assembled sections, nipple & gasket joined 10-year guarantee

See our full Stocked range of over 360 sizes on pages 124-133

Choice

Columns

Ancona® Stock radiators can be specified in either 2, 3 or 4 column depths in over 360 sizes in up to 40 sections.

Mounting Options

Ancona® Stock (excluding lacquer) can be mounted in one of 3 ways; Slip-on Feet; for a contemporary look

• Cast Feet; for a classic look Wall Brackets to position your steel multi column at any height

Stock Bare Metal Lacquer radiators can be wall or floor mounted with universal brackets or slip-on feet. See pages 132-133 for more information.

Service

All Ancona ® Stock white and bare metal lacquer models are delivered in 48-72 hours. Feature Finishes: Copper, Pearl Bronze, Textured Anthracite, Vintage Green, Satin Gold and Aged Brass are available in up to 2 weeks.

Ancona® Textured Anthracite Feature Finishes

Ancona® Aged Brass Feature Finishes

Ancona® 2 Column

Ancona® - Made to Order

Produced in our Italian factory, our made to order range of Ancona® steel multi column is the largest range in the UK, allowing maximum flexibility to create a radiator that matches your exact requirements. We offer over a vast range of Ancona Multi column in 2, 3, 4, 5 and 6 column options, with 3 different mounting options wall-hung, cast feet or welded feet.

Please visit our sectional radiator builder online at theradiatorcompany.co.uk.

Design

Ancona® Made to Order

• 2 -6 column options

• 25 heights; 195mm up to 2500mm

3 mounting options; Welded Feet, Cast Feet or Standard Wall Brackets

Up to 40 sections factory welded (prices on application for 40+ sections )

• 10-Year Guarantee

• 188 RAL colours including RAL 9016 as standard plus 31 special finishes

• Up to 4 weeks delivery for standard white, RAL colours and special finishes

Up to 6 weeks for bare metal lacquer (available in 300mm up to 2500mm)

See our full Made To Order range on pages 20-31. For sizes available direct from stock please see pages 124-133.

Choice

Columns

All made to order Ancona ® radiators can be specified in either 2, 3, 4, 5 or 6 column depths, allowing you to achieve the output you require in the space you have available.

Our Ancona ® made to order can be mounted in one of three ways: Welded Feet, Cast Feet, and Wall Brackets. Wall Brackets will allow you to position your steel multi column radiator at any height.

Use our online radiator builder to find the best solution for your room. It guides you through the process quickly and easily, allowing you to save your selections to your own Favourites List within your account. Visit theradiatorcompany.co.uk to get started.

Ancona offers a wide choice of valve options to perfectly complement your interior décor. Choose from Traditional, Vintage or the bold Vintage XL valves in a range of classic finishes, or opt for a contemporary look with the sleek Ideal TRV or Pistol TRV ranges. Save up to £45 with our valve promotion, see product pages in the back of the brochure or page 114 for full details.

Ancona® - Made to Order Finishes

The Ancona® made to order range is available in 188 RAL colours including our standard White RAL 9016, a bright porcelain white. We also offer 31 special finishes including Gun Metal Grey, Textured Ivory, Mottled, Metallics, Golds and a Bare Metal Lacquer finish.

Please call 01342 302250 for a RAL chart and Special Finish chart.

Match your room style by selecting from a full rainbow of 188 RAL colours. Use either contrasting colours to create a bold statement or sympathetic colours so your Ancona ® blends in to your wall.

32 Special Finishes including a Bare Metal Lacquer finish

There are 32 colours to choose from including: pastels, matts, metallics, mottled, textured effects, as well as bare metal lacquer finish. F or a Special Finish chart please call our Customer Service team on 01342 302250.

Ancona® Made to Order

Wall Brackets

Ancona® Console Table

Ancona® Bench Seat

Made to Order

Contemporary Designer - Stock & Made to Order

Designer Radiators

There is an extensive choice of vertical, horizontal, single & double formats, as well as a variety of tube designs so you can have the right combination of design and heat output, available in mild steel and aluminium, our designer radiators complement all types of interiors.

All our designer models with stock sizes are now available for delivery in 48-72 hours. Every stock size is listed in bold in the price tables. Made to order radiators available in 4-9 weeks.

Use our online BTU (heat output) calculator to get a guide of your room requirements which you can then check with your installer. Once you know your outputs use our online radiator builder to select the best solution for your room. It will take you through the process quickly and easily and allows you to save your ideas to your own Favourites List. Please visit our website theradiatorcompany.co.uk

Painted Valves

You can fully coordinate your designer radiator colour with matching valves and pipe covers to create a truly individual statement.Please note: valves and pipe covers must be ordered at

same time as the radiator. See page 115 for details.

Designed to complement the radiator range, these hooks and towel rails add practicality without compromising style. Available in magnetic and fixed options, they integrate seamlessly with compatible radiator models. See page 123 for full details.

Relax Hybrid Heats &

Cools with Fan Assisted Technology

Relax

Air with Fan Assisted Technology

Relax Style with Fan

Assisted Technology

Gravina

Sectional Aluminium - Stock

Smooth, clean lines and slim profiles make these ranges perfect for both new homes and as replacement radiators. Their practical functionality makes them suitable for living rooms, bedrooms, or studies and our variety of accessories can also enhance their use in kitchens, bathrooms, and hallways.

Use our online radiator builder to help select the best configuration for your room; theradiatorcompany.co.uk.

Sectional Aluminium is available in:

• White RAL 9010 in 48-72 hours

23 RALs, 31 Special Finishes and 6 Feature Finishes available in up to 2 weeks

Design

Energy Efficient & Made from Recycled Materials

Prices from £269.22

• An aluminium radiator will heat up in just over half the time of a steel radiator and use 50% less water, saving money by using less fuel. This makes aluminium among the most energy-efficient radiators available

As aluminium radiators are a third lighter than steel radiators, it means they are extremely light and easy to install on any type of wall.

Aluminium radiators are excellent heat conductors; our products have high thermal efficiency and contain a lower amount of water, therefore heating up faster than those produced with other materials. They are therefore easier to control & cost much less to run.

With modern building methods and regulations requiring more insulation and higher U values for windows, having a more efficient heating system that can react quickly to changes in temperature and that can produce enough heat from smaller heat emitters means a more comfortable living environment and cheaper utility bills.

All of our Sectional Aluminium radiators are made in Italy and are available in 4 different profiles.

Choice

Our Sectional Aluminium ranges boast incredible versatility with hundreds of possible size options all available from stock. Meet your size requirements with 3 to 20 sections, finished in a choice of 23 RAL colours (shown on page 216) and 31 Special Finishes (shown right) See our online radiator builder for more information; theradiatorcompany.co.uk.

Sectional Aluminium - Stock

Service

White models available from stock in 48-72 hours delivery. 23 RAL colours, 31 Special Finishes and 6 feature finishes available in up to 2 weeks. (Please allow an extra 2 working days for orders of more than 10 radiators).

Use our online BTU (heat output) calculator to obtain a guide to your room’s heating requirements, which can then be checked with your installer. Once you know your required output, use our online radiator builder to select the best solution for your space. It will take you through the process quickly and easily, allowing you to save your selections to your own ‘Favourites’ list. Please visit our website theradiatorcompany.co.uk

See our stock assembled options for sizes from 3-40 sections, larger sizes will be priced on application, please call 01342 302250 for details. Please note; delivery lead times on coloured aluminium start from when we have receipt of your chosen RAL colour number and description in writing. Please ensure the selected RAL colour number and name is included on your order to avoid potential delays.

Painted Valves

You now have the option to fully coordinate your aluminium radiator colour with your valves and pipe covers to create a unique and individual statement. Image right is an Oscar in Sahara with matching Pistol TRV, pipe covers & shrouds. Note: valves & pipe covers must be ordered at the same time as the radiator. See page 115 for full details.

Accessories

Aluminium accessories include hanging pegs, towel bars and for the Oscar and Vip, end panels to create a clean side profile. See page 175 for more details.

*Saving based on the value of individual items when bought separately. Order any of our selected valves & matching pipe covers at the same time as your radiator; PROMOV1W (white), PROMOV1C (chrome).

Feature Finishes

in the UK, our 6 Feature Finishes give a personal touch to any room, choose from Vintage Green, Satin Gold, Aged Brass, Textured Anthracite, Copper and Pearl Bronze. Please call customer services on 01342 302250 for sample swatches.

All our Sectional Aluminium radiators are available in a selection of the 23 most popular colours from the RAL range (shades of White, Cream, Grey, Brown, Red & Black), on page 216. Available in up to 2 weeks. Please call 01342 302250 for a RAL chart.

Special Finish Options

Colour Coordinating Service

Available for all sectional aluminium, see product pages 217 for full details including process & lead times.

Our aluminium ranges are also available in 31 exclusive special finishes (some of which are shown below), combining the efficiency of aluminium with a truly stunning finish. Available in up to 2 weeks. Please call 01342 302250 for a Special Finish chart.

Traditional Cast Iron

The epitome of traditional heating, cast iron radiators are a must for any period restoration; suitable for living rooms, bedrooms, kitchens, hallways and dining rooms. Our choice of seven classic designs offer the clean simplicity of “column” or the “decorative classic”. These radiators will be a perfect match for any existing radiators and being new, they come with a minimum ten year guarantee.

Design

Prices from £73.55 per section

As a material, cast iron has its own unique properties; these radiators will hold their heat for a long time, compared to a similar steel model, although they are slower to heat up and therefore less responsive to sudden changes in temperature.

Column

Probably the most well-known form of cast iron radiators, the original column models bring a real charm and character to any period property.

Decorative Classic

The intricate and detailed designs of the Henley and Wentworth with their tasteful scrollwork, bring a touch of splendour to your home. Our Linton range reflects the style of the 1920s, with smooth clean lines and a choice of exclusive galvanised and painted finishes.

Choice

Sectional

Our sectional cast iron range is incredibly versatile with literally hundreds of possible sizes from a wide range of column depths & heights finished to your size. Use our online radiator builder to select the best solution for your room on our website theradiatorcompany.co.uk.

Mounting Options

Cast iron radiators are very heavy and therefore best mounted with floor supports. All of our ranges are available with Footed Ends as standard. The Clifton, Ledbury, Henley and Wentworth can be sold with optional Cast Feet in either an Open or Closed style, see page 189 for details.

Available to buy with all of our cast iron radiators, see page 189 for details.

Service

Use our online radiator builder to select the best solution for your room. It will take you through the process quickly and easily and allows you to save your ideas to your own Favourites List. Please visit our website theradiatorcompany.co.uk

Our range of valves include the classically styled Vintage TRV, Vintage XL TRV as well as the Black & Brass TRVs.

Cast Iron Finishes

Our range of Cast Iron radiators are available in a wide choice of finishes. We offer a choice of colour ranges and levels of finishing for you to select from. We use high quality wet paint to finish all of our Cast Iron radiators apart from polished finishes that use a lacquer. Please note; that as a result of the casting process, cast iron radiators have a rough surface finish with small imperfections which will show after the painting process.

Primer Finish

RAL Colours

Our Cast Iron designs are available in a large selection of RAL colours, 188 internationally recognised paint colours. Colour can add an extra element of individual style and design, creating a personal and unique result, you can select from a wide range of colours.

For a RAL chart please call 01342 302250.

The Clifton, Henley & Wentworth are supplied in a black primer as standard, while the Ledbury is supplied in RAL 7022 Umbra Grey primer. These primer finishes must be painted to prevent rust from forming. If undertaken by hand, this can be a time-consuming & challenging process, as cast iron is extremely heavy & the entire surface must be thoroughly coated with a suitable undercoat & finishing coats to ensure complete protection & a long-lasting, durable finish.

Classic Cast Iron Colours

We have a range of classic cast iron colours on a selection of our cast iron models, these specially selected colours reflect the heritage and traditions of cast iron from Victorian times to the modern day.

Chosen with an eye on classic interiors these tough hard wearing and washable finishes add a stunning metallic look to your cast iron radiators.

Our selection of darker colours such as Iron Ore, Lead Grey and Factory Black are amongst the most popular choices along with the deep dark bronze of Vintage Coin and Classic Bronze.

The range of Gold’s and Copper are perfect for a more rich and bold statement. For samples of our Classic Cast Iron colours please call 01342 302250.

We are able to offer our Ledbury, Clifton, Henley and Wentworth in any one of Farrow & Ball’s® or Little Greene’s® stunning range of quality paints, a perfect match for any heritage property. Please see page 187 for more information.

Industrial & Burnished Finishes

A selection of our cast iron ranges are available in a beautiful, burnished finish. Created by hand in the UK, this process involves multiple stages; first a complete coat of black paint is applied to protect hidden, hard to access areas of the radiator and to provide a highlight for the visible polished areas. Then we polish the front, sides & tops of the sections, whilst the rear & more difficult to access areas between the sections (circa 2/3rds to 3/4s of the back, and the bottom ) will remain black. Finally, a clear lacquer is applied to protect and maintain this exquisite finish.

Aston Polished & Exclusive new finishes

Each Aston cast iron radiator is hand-finished to celebrate the material’s natural depth, texture, and enduring heritage. Available in a high-lustre polished finish or one of four exclusive new finishes, every radiator is carefully crafted using specialist painting, burnishing, and polishing techniques to enhance the form and character of the cast iron, delivering a refined and timeless result.

Linton Special, Polished & Galvanised Finishes

The Linton range of cast iron models is available in 188 RAL colours, four exclusive special finishes, and a galvanised copper finish. Both models can also be burnished or polished to create a distinctive industrial aesthetic. Burnishing enhances the natural character of the metal with a softer, aged appearance, while polishing delivers a cleaner, refined look with a subtle sheen. Each finish highlights the unique surface details of the cast iron. See pages 190–191 for more details.

Towel Rails - Stock and Made to Order

With space often at a premium, a towel rail functions as both a heat source and as a towel warmer; perfect for bathrooms, kitchens and cloakrooms.

Look out for our stocked Towel Rails delivered in 48-72 hours.

Design

Prices from £171.60

As Italy’s leading manufacturer with over 50 years experience, we offer the widest choice of stylish high-quality towel rails with guarantees ranging from 10 to 20 years.

Choice

An extensive choice of styles, from standard vertical formats to horizontal and side-loading towel rails. We offer a wide variety of tube styles, including round, flat, oval, and rectangular in a range of materials; mild steel, stainless steel, and brass for the more traditional style.

Our traditional towel rails include both wall and floor mounted options. With distinctive period features such as ball joint connections, cast iron radiator sections and antique galvanised finishes this range provides an array of choices to complement any traditional scheme.

Service

Look out for our Towel Rails which now have stock lines available for delivery in 48-72 hours; all stock lines are shown in bold in a separate ‘stock’ table in the technical section pages 194-213.

You have the option to fully coordinate your towel rail colour with your valves and pipe covers to create a unique and individual statement. Picture right shows a Lupin ladder rail in RAL 7016 with matching Cylinder valves and pipe covers and shrouds. See page 115 for full details.

Cylinder Valve & Pipe Covers

When you buy our Cylinder Valve & Pipe Covers with any Towel Rail, quote PROMOV3 at time of order. White or Chrome only. See Valve page 114 and Towel Rail Technical pages 194–213 for details.

Towel Rails - Stock and Made to Order

Timer Control Dual Fuel Element Kit

Most towel rails work with central heating, so they only heat up when the heating is on. In summer, this often means a cold towel rail. Dual fuel kits, such as our Timer Control Element, let you enjoy a warm towel rail all year round. An electric element and t-piece is added to the rail, allowing it to operate whenever the central heating is switched off.

Towel rails that can be converted will have this dual fuel symbol on their respective technical pa ges.

Timer Control Features

• 7 day timer

• 2 hour boost

Child safety lock

• Optional IR remote control (see pricing table below) Anti-freeze

• Open window detection

Timer Control Element Kits

These elements are not available with the following towel rails Accorto, Chalfont, Cuscino, Ertza, Foro, Iris, Linton, Step and Step BDO.

All Timer Control Element Kits are delivered from stock in 48-72 hours.

For advice on the correct element size for your towel rail, call us on 01342 302250 or visit our website www.theradiatorcompany.co.uk

Finishes

Popular stock sizes in White RAL 9016 or Chrome are available for delivery in 48-72 hours

188 RAL Colours

Match your bathroom, kitchen, or cloakroom style by selecting from a full rainbow of 188 RAL colours. Use either contrasting colours to create a bold statement or sympathetic colours so your Towel Rail blends into your wall. For a RAL chart please call 01342 302250.

31 Special Finishes

A choice of pastels, matts, metallics, mottled & textured effects. For a Special Finish chart please call our Customer Service team on 01342 302250.

Cuscino

Ellipsis Classic

Ellipsis Lato

Ellipsis Towel Rail

Ellipsis 30mm Towel Rail

Sitar Towel Rail / Sitar BDO

Sitar Lato

Piano Towel Rail

Piano Lato

Linton Towel Rail

Valves

Every Radiator needs a pair of valves to operate. Efficient performance is not the only benefit of good quality valves, they also add to the appearance of your finished radiator. All our valves have a 5 year warranty and can be delivered within 48-72 hours.

Wheelhead and Lockshield

Every Radiator requires a pair of valves that work together, the Wheelhead adjusts the flow of water into the radiator and the Lockshield balances the flow of water around the whole system, ensuring each radiator heats up at the same rate, these should be adjusted by your installer.

TRV or Manual?

Thermostatic Radiator Valves (TRVs) monitor the room temperature. They usually have between 4 to 6 levels and the valve opens and closes automatically to reach and maintain the desired level. TRVs can help maximise the efficiency of your system reducing energy consumption and are now a requirement as part of building regulations relating to new builds and refurbishments. Manual valves are adjusted by hand; they allow a constant flow of water through your radiator regardless of the room temperature and radiators will only turn off when the main thermostat reaches its set point or the programmer turns the heating off.

Angled, Corner or Straight?

Pipework and Pipe centres

All our valves have 15mm connections as standard unless otherwise stated; if you need different connections please specify when ordering your valves. The use of plastic pipe has become more popular; however, our valves are not designed to operate with plastic pipes. Also, if chrome pipework is used most valves will not grip it securely because chrome is a harder surface than copper or iron and leaks can occur. Special fittings are required to enable valves to grip chrome pipe work and these must be specified at time of order. The position of the pipework for your radiator will be affected by the valves you select. All angled valves have a dimension to allow for adjusting pipe work. You should make adequate allowances for manufacturing tolerances in pipe centres. For straight valves, a minimum of 150mm should be allowed from the base of the radiator for ease of installation.

Please note: We will always supply angled valves as standard, if you require straight please specify at time of order. We endeavour to ensure all pipe centres are correct, however manufacturing tolerances must be considered; we strongly recommend that pipe work is not altered or adjusted until the new radiator or towel rail is fitted. The Radiator Company will not accept any responsibility for claims resulting from incorrect pipe centres.

Saving based on the value of individual items when bought separately. Order any of our selected valves and matching pipe covers at the same time as your radiator, quoting the relevant promo code below. See Radiator and Towel Rail Technical Pages 124–213 for details.

Painted Valves

Create a unique and individual statement with your valves and pipe covers. The valves pictured below can be painted in the same colour as your radiator from one of our 23 RAL colours shown on page 216, 31 Special Finishes and 6 Feature Finishes.

Pictured right is a Poppy Towel Rail in Brass Lacquer with matching Cylinder valves, pipe covers & shrouds. Painted valves are delivered in up to 2 weeks.

Complete the look with our Tinted Lacquer Cylinder Valves, designed to coordinate with our Tinted Lacquer Poppy & Lupin Towel Rails. For full details, please see below & pages 104–107 &204–207.

Please note: Painted valves & pipe covers can only be ordered in the same colour and at the same time you order your painted radiator and can not be purchased separately.

To provide complete coordination, simply follow these three easy steps:

1. Select your valve

Tinted Lacquer Cylinder valves are available with our Tinted Lacquer Poppy & Lupin Towel Rails, see pages 104-107/204-207.

2. Select your colour from a choice of 23 RALs, 31 Special Finishes and 6 new Feature Finishes

There are 23 RAL colours and 31 Special Finishes to choose from including pastels, matts, metallics, mottled and textured effects and 6 feature finishes shown below. For a RAL or Special Finish chart please call our Customer Service team on 01342 302250.

3. Select matching pipe covers and shrouds

We can also match the colour of the pipe covers and pipe shrouds for your radiators or towel rails in any one of the colour options shown above. Each pair of painted pipe covers comes with matching shrouds.

TRV Valves

Corner Ideal TRV shown on pages 12, 37, 38, 41 & 52.

Available in six finishes Delivered in 48-72 hours.

TRV Valves

Ideal

TRV shown on pages 13, 17, 51, 56 & 69.

Available in six finishes, in angled or straight options, the Ideal TRV is a great value Thermostatic valve. Delivered in 48-72 hours.

Please note:

Stocked valves are listed in bold & will be delivered in 48-72 hours.

All valves are sold in pairs, a lockshield and a wheelhead. Angled will be supplied as standard, please specify if you require straight valves.

Ideal TRV Kits

Ideal TRV Kit consists of valves, pipe covers and shrouds, saving up to £24.00 compared to when bought separately.

Traditional Valves

Vintage

TRV shown on pages 11, 22, 76 & 80.

The Vintage TRV valve offers great value.

Made from die-cast brass

Best suited to 2, 3, & 4 column Ancona’s ®

Height 115mm

• Weight 460g

• Stock available in 48-72 hours, made to order 5 weeks

Made in Italy

Pipe Centers

For angled valves allow an extra 90mm in total Valve Height 115mm Please Note Vintage TRV valves are not bi-directional

Please note: all valves are sold in pairs, a lockshield & a wheelhead. Angled supplied as standard, please specify if you require straight valves. Straight Vintage TRV valves in Chrome are available from stock in 48-72 hours, all other finishes will be delivered in 5 weeks.

Vintage TRV Kit

Kit consists of valves, pipe covers and shrouds, save up to £30.00 when buying the Vintage TRV Kit.

Vintage TRV special corner valves

Vintage TRV valves are available in a selection of handed return angled valve options. Return angled valves are left and right-handed, you can select the correct option by identifying which side of the radiator has the flow connection; e.g flow connection on the left side requires a left-hand wheelhead and matching lockshield.

Please specify left or right-hand return for the wheelhead when ordering the return angled valves, Chrome is available from stock in 48-72 hours, delivery is 5 weeks for all other finishes. Please call 01342 302250 for more information.

Traditional Valves

Stocked valves are listed in bold & will be delivered in 48-72 hours.

Vintage XL TRV

shown on pages 15, 20, 79, 80 & 82.

The Vintage XL TRVs large size creates an impactful presence.

• Made from die-cast brass

• Best suited to 5 & 6 column Ancona’s ® and Cast Iron radiators

Height 160mm

Weight 881g

Available from stock in 48-72 hours

• Made in Italy

Pipe Centers For angled valves allow an extra 120mm in total

Valve Height 160mm

Please Note Vintage XL TRV valves are not bi-directional

Please note: all valves are sold in pairs, a lockshield & a wheelhead. Angled only.

Kit consists of valves, pipe covers and shrouds, save up to £27.60 when buying the Vintage XL TRV Kit.

Traditional Valves

Black & Brass TRV

Delivered in 48-72 hours.

Brass Angled Wheelhead & Lockshield

Pipe Centers

For angled valves allow an extra 90mm in total

Chrome Straight Wheelhead & Lockshield

Valve Height 127mm

Please Note Black & Brass TRV valves are not bi-directional

Stocked valves are listed in bold & will be delivered in 48-72 hours.

Crosshead shown on page 113

Chrome Straight

Pipe Centers For angled valves

Chrome Angled Wheelhead & Lockshield

This valve can be painted in a choice of 23 RAL colours and 31 Special Finishes and 6 new Feature Finishes, see page 115

Valve Height 110mm Please Note Crosshead valves are not bi-directional

or

Please note: all valves are sold in pairs, a lockshield and a wheelhead. Angled will be supplied as standard, please specify if you require straight valves.

Pistol TRV shown on pages 36, 46, 61 & 73

Available in three standard finishes as well as painted options (see page 115), the Pistol TRV is available in angled or straight configurations.

Delivered in 48-72 hours.

Pipe Centers

For angled valves allow an extra 80mm in total

Valve Height 128mm

Standard Finishes

Please Note Pistol TRV valves are not bi-directional

Chrome Angled Wheelhead & Lockshield (shown in the fully open position)

Please note: all valves are sold in pairs, a lockshield and a wheelhead. Angled will be supplied as standard, please specify if you require straight valves

Pistol TRV Kits

Pistol TRV Kit consists of valves, pipe covers and shrouds, save up to £28.80.

Manual Valves for towel rails

Pipe Centers 50mm Valve Height 56mm Please Note Duo 50 valves are not bi-directional

Angled supplied as standard, please specify if you require straight valves.

shown on pages 96 & 109

Angled Wheelhead & Lockshield

Please note: all valves are sold in pairs, a lockshield and a wheelhead. Angled will be supplied as standard, please specify if you require straight valves.

Stocked valves are listed in bold & will be delivered in 48-72 hours.

Cube shown on pages 95 & 108.

shown on pages 100 & 103.

Angled Wheelhead & Lockshield

Valves are sold in pairs, a lockshield and a wheelhead. Angled supplied as standard, please specify if you require straight valves.

Pipe Covers & Shrouds

Available in 7 set colours; White, Chrome, Antique Copper, Nickel, Polished Brass, Antique Brass & Black. Pipe covers and shrouds are the perfect method of creating a neat finish for your radiators. They remove the need to paint copper pipes and hide unsightly holes drilled in the floor or wall for the feed pipe. Available in 7 standard finishes, they can be delivered in 48-72 hours. Each set is supplied with two 160mm covers and two shrouds.

Save money when you buy your pipe covers and shrouds as part of a valve kit, see page 114 for more information.

Ancona® Accessories

Optional Solid Brass Wall Ties & Airvents for Ancona multi column radiators

These solid brass wall ties provide a stylish finishing touch to any Ancona ® radiator; select to match your valves. Available as a kit including matching airvent and blanking plug in Antique Brass, Chrome and Brushed Nickel. Please note these wall ties and airvents are an optional extra and do not come as standard with your Ancona ® radiator.

Optional Antique Copper Airvent & Blank Plug

Our Antique Copper Airvent & Blanking Plug is an ideal match for the Pearl Bronze Feature Finish (pictured right) on your Ancona radiator.

As an alternative, why not order an Ancona ® manual brass airvent to co-ordinate with your chosen colour or to match your valve. 1 airvent is needed per Ancona ® radiator; please specify at time of order. Available from stock.

® Ancona is a registered trademark of IRSAP UK Limited

Manual Brass Airvents A nominal £5 charge for

&

Accessorise your Radiator

Designed to complement the radiator range, these accessories add everyday practicality without compromising on style. The collection includes discreet hooks and towel rails, available in magnetic and fixed options and a choice of sizes, all designed to integrate seamlessly with compatible radiators. Perfect for towels, robes or accessories, each piece maintains a clean, minimal look. Choose from 188 RAL colours and 31 Special Finishes, including pastels, matt, metallic and textured effects, plus 6 Feature Finishes. For more information or to order a RAL or Special Finish chart as well as Feature Finish samples please call 01342 302250

Flat & Tube Towel Bars

Towel Hooks

Note: Magnetic accessories are intended for use on flat, suitable surfaces to ensure secure attachment. Each hook supports a

protective silicone pad helps safeguard the surface finish, while load performance may vary depending on the radiator material & surface characteristics

Decorative Accessory Compatibility Notes

Accessories are designed to suit a wide range of radiator models and sizes. Certain towel rails require minimum radiator widths or element quantities to ensure the best fit. Magnetic accessories are suitable for compatible radiator materials and constructions, and availability may vary depending on radiator configuration. Please refer to the technical information table below for full compatibility guidance.

Ancona® Stock shown on pages 8-17

High quality Italian design & manufacture.

Steel multi column 45mm sections. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, Feature Finishes: Copper, Pearl Bronze, Textured Anthracite, Vintage Green, Aged Brass and Satin Gold. (Please call 01342 302250 for sample swatches). Colour Coordination Service available, see page 217 for full details.

Stock White RAL 9016: 48-72 Hours

Feature Finishes: Up to 2 weeks

Online Radiator Builder

*

Use our ONLINE RADIATOR BUILDER to help you select the best solution for your room. It will take you through the process quickly and easily and allows you to save your ideas to your own Favourites List. To select the right size of radiator for your room you need to calculate the BTU (heat output) you require to heat your room, you can use our online calculator to work this out. Go to our new website theradiatorcompany.co.uk

Calculate the heat output you need for your room, using our online BTU (Heat Output) Calculator or check with your installer, remember you may need more than one radiator to heat your room.

Use the tables on pages 126-133 to find the best size to suit your space and heat output you need; if you cannot get the right size and output combination from a 2 column radiator try an alternative height or column (depth) option.

Choose the style of mounting option you want; for Ancona stock white & Feature Finishes standard wall brackets are included in the radiator price, for Bare Metal Lacquer Ancona stock universal wall brackets only are included in the price.

If selecting Cast Feet or Slip-on Feet there is an additional cost, see right for Cast Feet & Slip-on Feet Kits and page 133 for bare metal lacquer Slip-on Feet pricing tables.

If you need an alternative size, there are thousands of other sizes we can make to order

• Price per section includes plugs,bushes,air vent and wall ties.

• Please specify with Cast Feet or with Wall Brackets when you place your order.

These simple steps will help you choose a product that matches your requirements.

5

Size the finished product & double check

Each section regardless of how many columns it has is 45mm wide,so a 37 section radiator will equal 37 x 45mm = 1665mm wide,plus bushes plus valves.

Ancona® Stock White & Feature Finishes Mounting Options

1

– Calculate the output & number of radiators

To find the output you require for each radiator first work out the heat output for your room.

For a more detailed explanation please see page four or visit our website at www.theradiatorcompany.co.uk

f this is too wide then either increase the height of each section or choose a section with more columns.For example;

Mounting Options for Ancona Stock in White & Feature Finishes, (Bare Metal Lacquer mounting options can be found on page 133)

If you have a large room,divide this number by the total number of radiators you need in the room.e.g.a lounge 16’ x 20’ x 8’ ceilings = a volume of 2560 x 6 = 15,360 BTUs. Two radiators would be required which = 7680 BTUs each. Your installer will also be able to help you decide this,if required.

3 column 742mm high = 7680 BTUs divided by 257 BTUs per section = 30 sections = 1350mm wide. or 4 column 592mm high = 7680 BTUs divided by 274 BTUs per section = 28 sections = 1260mm wide.

Once you have chosen your radiator size simply choose your preferred mounting option; standard wall brackets are included in the radiator price. Cast Feet and Slip-on Feet are an additional cost, see pricing tables below.

2 – Choose the number of Columns

Please note.

We will supply the correct number of brackets and wall ties with each order; prices for extra brackets / feet and wall ties are available on request, please call 01342 302250

TRC Multi Columns are available in a choice of three column depths,2,3 and 4 columns.More columns equals greater depth,bigger water content and therefore a higher output, however choice is generally down to aesthetics.

The TRC Multi Column is supplied as a finished radiator with B.O.E.(Bottom Opposite End) connections as standard and comes assembled up to a maximum of 40 sections or 100kg in weight.For radiators outside these parameters please consult the sales office for advice and confirmation of extra charges if required.

6 – Choose the mounting option

Note: Anconas over 40 sections will incur a £35 joining charge, please see bottom of this page for more information

3 – Choose a Height

Your TRC Multi Column can be supplied in one of two mounting options,either with Cast Feet or with Wall Brackets.

Please specify your preferred mounting option at time of order (remember cast feet and slip on feet are not included in the radiator price)

All column depths are available in the same range of 15 heights,from 220mm to 2500mm.Decide on a section height that matches the size you require,allowing an additional 100mm to 150mm for valves and/or cast feet. e.g.if

• Cast feet give the finished radiator a traditional look - see page 57.

Note: Anconas must be a minimum of 100mm from the floor for all mounting options

Wall mounting options included in radiator price

• With Wall brackets you have the freedom to position your TRC Multi Column at any height - see page 56. All sections are 45mm wide for TRC Multi Column with Cast Feet or Brackets left to right = number of sections x 45mm and valves from wall: 66mm to 76mm 87mm to 97mm 107mm to 117mm

Standard wall brackets

Supplied as standard with every Ancona order unless an alternative is specified.

Pipe centres from wall:

2 column = 64mm - 74mm

3 column = 82mm - 92mm

Ancona with welded feet

4 column = 102mm - 112mm

ANCO2C60X10+WF106004609.504701604 £269.93£317.17

ANCO2C60X15+WF1560069014.257052406 £328.64£386.15

Ancona Bench Seat

Shown on page 55

Optional Cast Feet kit prices (includes wall ties)

ANCO2C60X20+WF2060092019.009403208 £387.35£455.14

ANCO3C60X10+WF1060046014.306402184 £276.29£324.64

ANCO3C60X15+WF1560069021.459603276 £343.53£403.65

ANCO3C60X20+WF2060092028.6012804369 £410.78£482.67

ANCO3C60X25+WF25600115035.7517505973 £548.92£644.98

ANCO3C75X15+WF1575069026.1012004096 £364.73£428.56

ANCO3C75X20+WF2075092034.8017505973 £437.86£514.49

ANCO4C60X10+WF1060046018.908202799 £314.86£369.96

ANCO4C60X15+WF1560069028.3512304198 £398.01£467.66

ANCO4C60X20+WF2060092037.8016405597 £481.15£565.35

ANCO4C60X25+WF25600115047.2520506997 £638.59£750.34

ANCO4C75X10+WF1075046023.1010103447 £316.05£371.36

ANCB4S381338813008873027£470.83£612.10£553.23£719.22

ANCB5S4313434130011083783£531.52£690.94£624.54£811.85

ANCB6S4813480130013304540£594.47£772.84£698.50£908.09

ANCB4S3816388160010613621£545.50£709.16£640.96£833.26

ANCB5S4316434160013264526£608.15£790.59£714.58£928.94

ANCB6S4816480160016865756£685.59£891.26£805.57£1,047.23

ANCB4S3819388190012644313£597.84£777.18£702.46£913.19

ANCB5S4319434190015805391£687.95£894.33£808.34£1,050.84

ANCB6S4819480190018956469£780.30£1,014.38£916.85£1,191.90

ANCB4S3821388210014004778£642.08£834.71£754.44£980.78

ANCB5S4321434210017505972£741.40£926.52£871.15£1,088.66

ANCB6S4821480210021007166£843.06£1,095.98£990.60£1,287.78

ANCB4S3826388260017135848£787.38£1,023.59£925.17£1,202.72

100

Pipe centres from wall:

2 column = 64mm - 74mm

3 column = 82mm - 92mm

4 column = 102mm - 112mm

Note: Please remember to add 100mm to the height of the Ancona section you have chosen if you are using cast feet.

ANCO4C75X15+WF1575069034.6515155171 £403.54£474.16

ANCO4C75X20+WF2075092046.2020206894 £491.02£576.95

ANCB5S4326434260021427310£908.68£1,181.30£1,067.70£1,388.03

ANCB6S4826480260025708772£1,033.47£1,343.52£1,214.33£1,578.64

Optional Slip-on Feet kit prices (includes wall ties)

To find your nearest Showroom or Merchant: Tel. 08707 302250 www.theradiatorcompany.co.uk

Pipe centres from wall:

2 column = 64mm - 74mm

3 column = 82mm - 92mm

4 column = 102mm - 112mm

Note: Please remember to add 100mm to the height of the Ancona section you have chosen if you are using Slip-on Feet.

The perfect tool for tightening Ancona Bushes and air vents. An exact fit, this robust nylon spanner reduces the risk of damaging your radiator with inappropriate metal tools.

Helpful notes & advice

Please call us on 01342 302250 if you need any further information or help with specifying your Ancona. Due to transport and handling restrictions, Stock Anconas are supplied pre-assembled up to a maximum of 40 sections. For radiators outside these parameters there is an additional joining charge, please consult Customer Services to discuss alternative requirements. All Anconas come supplied as a finished radiator with ½" B.O.E. (Bottom Opposite End) connections as standard

High quality Italian design & manufacture. Steel multi column 45mm sections. CE/UKCA approved & certified to BS EN442

White RAL 9016 as standard, Feature Finishes: Copper, Pearl Bronze, Textured Anthracite, Vintage Green, Satin Gold & Aged Brass. Please call 01342 302250 for Feature Finish sample swatches. Colour Coordination Service available, see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks

All prices include wall brackets (floor mounting options shown opposite) Widths include measurement for bushes, please note due to manufacturing tolerances widths shown may vary by +/- 2mm. Pipe centres left to right = width + valves.

SAVE £45 * For all Vintage TRV finishes see page 118.

WHEN YOU BUY OUR VINTAGE TRV & PIPE COVERS WITH ANY ANCONA® PURCHASE QUOTING PROMOV2 AT TIME OF ORDER.

TRC Multi Column

Shown on pages 56 - 57

ModelHeightWeight

TRCM2C59W5920.9644149 £13.25£15.57

TRCM2C74W7421.1754183

£13.78£16.19

TRCM2C14W14922.11104354 £27.63£32.47

TRCM2C17W17922.51124425 £32.43£38.11

ModelHeightWeight WattsBtu’sWhiteWhite (mm) A(kg)

TRCM3C49W4921.2052178 £15.02£17.65

TRCM3C59W5921.4262210 £15.18£17.84

TRCM3C74W7421.7275257 £16.49£19.38

ModelHeightWeight

TRCM4C29W2921.0944149 £17.82£20.94

TRCM4C49W4921.6568232 £18.34£21.55

TRCM4C59W5921.9380274 £18.79£22.08

TRCM4C74W7422.3199337 £19.74£23.19

Technical Details

Feature Finishes

The TRC Multi Column range is incredibly versatile with literally hundreds of possible sizes,in a choice of mounting options.

• All prices and outputs are given per section.

• Price per section includes plugs,bushes,air vent and wall ties.

• Please specify with Cast Feet or with Wall Brackets when you place your order.

These simple steps will help you choose a product that matches your requirements.

1 – Calculate the output & number of radiators

To find the output you require for each radiator first work out the heat output for your room.

4 – Calculate the number of sections you require Listed next to each section height under ‘BTUs’ will be the output each section gives.Divide your required output by this number to find the total number of sections needed to match the output; e.g.if you have chosen a 3 column 592mm high then 7680 BTUs divided by 210 BTUs per section = 37 sections.

5 – Size the finished product & double check Each section regardless of how many columns it has is 45mm wide,so a 37 section radiator will equal 37 x 45mm = 1665mm wide,plus bushes plus valves.

Mounting options for stock sizes

For a more detailed explanation please see page four or visit our website at www.theradiatorcompany.co.uk

Once you have chosen your radiator size, simply choose your preferred mounting option; standard wall brackets are included in the radiator price.

If you have a large room,divide this number by the total number of radiators you need in the room.e.g.a lounge 16’ x 20’ x 8’ ceilings = a volume of 2560 x 6 = 15,360 BTUs. Two radiators would be required which = 7680 BTUs each. Your installer will also be able to help you decide this,if required.

2 – Choose the number of Columns

f this is too wide then either increase the height of each section or choose a section with more columns.For example; 3 column 742mm high = 7680 BTUs divided by 257 BTUs per section = 30 sections = 1350mm wide. or 4 column 592mm high = 7680 BTUs divided by 274 BTUs per section = 28 sections = 1260mm wide.

Please note.

Floor mounting options

The TRC Multi Column is supplied as a finished radiator with B.O.E.(Bottom Opposite End) connections as standard and comes assembled up to a maximum of 40 sections or 100kg in weight.For radiators outside these parameters please consult the sales office for advice and confirmation of extra charges if required.

Cast feet and Slip-on Feet are an additional cost, see pricing tables below. We will supply the correct number of brackets and wall ties with each order; prices for extra brackets / feet and wall ties are available on request, please call 01342 302250.

TRC Multi Columns are available in a choice of three column depths,2,3 and 4 columns.More columns equals greater depth,bigger water content and therefore a higher output, however choice is generally down to aesthetics.

3 – Choose a Height

6 – Choose the mounting option Your TRC Multi Column can be supplied in one of two mounting options,either with Cast Feet or with Wall Brackets.

Ancona’s must be a minimum of 100mm from the floor for all mounting options. Note: Ancona’s over 40 sections will incur a £35 joining charge, please see bottom of page 125 for more information.

• Cast feet give the finished radiator a traditional look - see page 57.

• With Wall brackets you have the freedom to position your TRC Multi Column at any height - see page 56. All sections are 45mm wide

All column depths are available in the same range of 15 heights,from 220mm to 2500mm.Decide on a section height that matches the size you require,allowing an additional 100mm to 150mm for valves and/or cast feet.

Wall mounting options included in radiator price

Pipe Centres for TRC Multi Column with Cast Feet or Wall Brackets

Standard Wall Brackets

Pipe centres left to right = number of sections x 45mm plus bushes and valves

These will always be supplied with every Ancona order unless an alternative is

Pipe centres from wall:

2 Column = 66mm to 76mm

3 Column = 87mm to 97mm

4 Column = 107mm to 117mm

Pipe centres from wall:

2 column = 64mm - 74mm

3 column = 82mm - 92mm

Ancona with welded feet

4 column = 102mm - 112mm

Shown on page 52

Model SectionsHeightWidth WeightWattsBtu’sWhiteWhite (mm) A(mm) B(kgs)t 50°c Δt 50°cEx VATInc VAT

ANCO2C60X10+WF106004609.504701604 £269.93£317.17

ANCO2C60X15+WF1560069014.257052406 £328.64£386.15

ANCO2C60X20+WF2060092019.009403208 £387.35£455.14

ANCO3C60X10+WF1060046014.306402184 £276.29£324.64

ANCO3C60X15+WF1560069021.459603276 £343.53£403.65

ANCO3C60X20+WF2060092028.6012804369 £410.78£482.67

ANCO3C60X25+WF25600115035.7517505973 £548.92£644.98

ANCO3C75X15+WF1575069026.1012004096 £364.73£428.56

ANCO3C75X20+WF2075092034.8017505973 £437.86£514.49

Ancona Bench Seat

Shown on page 55

ModelHeightWidth WattsBtu’sWhiteColoursWhiteColours (mm) A(mm)

ANCB4S381338813008873027£470.83£612.10£553.23£719.22

Optional Cast Feet kit prices (includes wall ties) 100

ANCO4C60X10+WF1060046018.908202799 £314.86£369.96

ANCO4C60X15+WF1560069028.3512304198 £398.01£467.66

ANCO4C60X20+WF2060092037.8016405597 £481.15£565.35

ANCO4C60X25+WF25600115047.2520506997 £638.59£750.34

ANCO4C75X10+WF1075046023.1010103447 £316.05£371.36

ANCO4C75X15+WF1575069034.6515155171 £403.54£474.16

ANCB5S4313434130011083783£531.52£690.94£624.54£811.85

ANCB6S4813480130013304540£594.47£772.84£698.50£908.09

ANCB4S3816388160010613621£545.50£709.16£640.96£833.26

from 32 to 42mm

ANCB5S4316434160013264526£608.15£790.59£714.58£928.94

ANCB6S4816480160016865756£685.59£891.26£805.57£1,047.23

ANCB4S3819388190012644313£597.84£777.18£702.46£913.19

Pipe centres from wall:

ANCB5S4319434190015805391£687.95£894.33£808.34£1,050.84

2 column = 64mm - 74mm

ANCB6S4819480190018956469£780.30£1,014.38£916.85£1,191.90

ANCB4S3821388210014004778£642.08£834.71£754.44£980.78

3 column = 82mm - 92mm

ANCB5S4321434210017505972£741.40£926.52£871.15£1,088.66

4 column = 102mm - 112mm

ANCB6S4821480210021007166£843.06£1,095.98£990.60£1,287.78

ANCB4S3826388260017135848£787.38£1,023.59£925.17£1,202.72

ANCB5S4326434260021427310£908.68£1,181.30£1,067.70£1,388.03

Note: Please remember to add 100mm to the height of the Ancona section you have chosen if you are using cast feet.

ANCO4C75X20+WF2075092046.2020206894 £491.02£576.95

ANCB6S4826480260025708772£1,033.47£1,343.52£1,214.33£1,578.64

Optional Slip-on Feet kit prices (includes wall ties)

All dimensions given in millimetres To convert from BTU Δt50°to Δt60°multiply by 1.264 Prices listed in purple are stock items

Pipe centres from wall:

2 column = 64mm - 74mm

To find your nearest Showroom or Merchant: Tel. 08707 302250 www.theradiatorcompany.co.uk

3 column = 82mm - 92mm

4 column = 102mm - 112mm

Note: Please remember to add 100mm to the height of the Ancona section you have chosen if you are using Slip-on Feet.

Ancona® 3 Column shown on pages 11-15

High quality Italian design & manufacture. Steel multi column 45mm sections. CE/UKCA approved & certified to BS EN442

White RAL 9016 as standard, Feature Finishes: Copper, Pearl Bronze, Textured Anthracite, Vintage Green, Satin Gold & Aged Brass. Please call 01342 302250 for Feature Finish sample swatches. Colour Coordination Service available, see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks

All prices include wall brackets (floor mounting options shown on page 127) Widths include measurement for bushes, please note due to manufacturing tolerances widths shown may vary by +/- 2mm. Pipe centres left to right = width + valves.

500mm High

600mm High

750mm High 1800mm High

Mounting options for stock sizes

Once you have chosen your radiator size simply choose your preferred mounting option; standard wall brackets are included in the radiator price see pages 127 for technical drawings and pipe centres.

Floor mounting options

Optional Cast feet & Slip-on Feet are an additional cost, see pricing tables & technical drawings on pages 125/ 127.

Optional Solid Brass Wall Ties & Airvents

These solid brass wall ties provide a stylish finishing touch to any Ancona ® radiator; select to match your valves. Available as a kit including matching airvent and blank plug in Antique Brass, Chrome and Brushed Nickel. Please note these wall ties and airvents are an optional extra and do not come as standard with your Ancona ® radiator.

Ancona® 4

High quality Italian design & manufacture. Steel multi column 45mm sections. CE/UKCA approved & certified to BS EN442

White RAL 9016 as standard, Feature Finishes: Copper, Pearl Bronze, Textured Anthracite, Vintage Green, Satin Gold & Aged Brass. Please call 01342 302250 for Feature Finish sample swatches. Colour Coordination Service available, see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks

All prices include wall brackets (floor mounting options shown on page 127) Widths include measurement for bushes, please note due to manufacturing tolerances widths shown may vary by +/- 2mm. Pipe centres left to right = width + valves.

300mm High

500mm High

600mm High

Mounting options for stock sizes

Once you have chosen your radiator size simply choose your preferred mounting option; standard wall brackets are included in the radiator price see pages 127 for technical drawings and pipe centres.

Floor Mounting options; optional Cast feet and Slip-on Feet are an additional cost, see pricing tables and technical drawings on pages 127.

Feature Finishes

Please call customer services on 01342 302250 for sample swatches.

Ancona® Bare Metal Lacquers shown on pages 16-17

High quality Italian design & manufacture.

Steel multi column (2, 3 and 4 column options) 45mm sections.

CE/UKCA approved & certified to BS EN442.

Bare Metal Lacquer as standard

Tinted Lacquers Copper and Brass

Bare Metal Lacquer: 48-72 Hours

Tinted Lacquers (Copper and Brass): Up to 2 weeks

All prices include universal wall brackets (optional slip-on feet shown page 133). The radiators widths include bushes.

Pipe centres left to right = width + valves.

This finish highlights the raw basic steel product showcasing the manufacturing marks created by the processes of welding and sanding to deliver an industrial look. Each radiator will be unique, with the random position of the weld lines on the column tubes and the level of the final sanding. The clear lacquer allows these characteristics to be the hero and maintains the natural steel finish. Please see page 133 (right) for examples of weld lines and sanding marking. Our Copper and Brass tinted lacquers add an extra dimension whilst retaining the individual nature of the raw finish marks.

2 Column - 1800mm High

3 Column - 600mm High

4 Column - 600mm High

Each radiator will be unique, with the random position of the weld lines on the column tubes and the level of the final sanding. Both the clear & tinted lacquers allow these characteristics to be the hero and maintains the natural steel finish.

Sanding marking

Once you have chosen your radiator size simply choose your preferred mounting option (below).

Universal wall brackets are included in your radiator price. Slip-on Feet are an additional cost, please see kit prices below. Please specify Slip- on Feet at time of order (fittings are available to order with a corresponding radiator only). The correct number of wall brackets are supplied with each order; prices for extra wall brackets are available on request, please call 01342 302250.

Universal wall brackets (included in radiator price)

Supplied as standard with all lacquer stock Ancona's® 24mm

Pipe centres from wall:

2 column = 56mm

3 column = 74mm 4 column = 93mm

Optional Slip-on Feet kits

Pipe centres from wall: 2 column = 56mm, 3 column = 74mm, 4 column = 93mm

Ancona ® Made to Order shown on pages 18-25

High quality Italian design & manufacture.

Steel multi column 45mm sections, 2-6 column options CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours and 32 Special Finishes

Please call 01342 302250 for a RAL or Special Finish chart

Made to Order: Up to 4 weeks White & Colours Up to 6 weeks Bare Metal Lacquer.

Create a radiator that matches your exact requirements with thousands of sizes, plus a choice of 188 RAL colours and 31 special finishes and a bare metal lacquer finish.

Choose your radiator using our online radiator builder

It is vital to know the correct heat output you need to keep your room warm, use our online BTU (heat output) calculator to get a guide to your requirements which you can then check with your installer.

Once you know your outputs use our online radiator builder to select the best solution for your room. It will take you through the process quickly and easily and allows you to save your ideas to your own Favourites List. Go to our website theradiatorcompany.co.uk

Once you know your outputs you can use the brochure to specify your radiator by following these steps (or call our Customer Services team on 01342 302250 who will help you size your radiator).

• Note the space you have in mind for the radiator(s) you need; vertical or horizontal, length, height & depth

Select a column option and height that fits your space; Calculate the number of sections you need by dividing the required BTU (Watt) output with the output per section; e.g 4142 BTUs divided by 205 = 20 sections, based on 3 column, 600mm high sections (always round up to the next whole number of sections).

• If the use of this section size does not work in the available space, try a different column option or if possible a different height.

• Once you have calculated the best number and size of sections, select the best mounting option. Wall hung options (standard wall brackets) are included in your radiator price. Cast Feet or Welded Feet are an additional cost, see kit prices on page 139 . Choose your colour from over 200 colours and special finishes; RAL 9016 Traffic White is our standard finish.

Work out the price of your radiator; e.g 3 column 600mm high, white, 20 sections x £41.46 = £829.20 + welded feet kit price £151.20 = £980.40 (inc VAT).

• Place your order with your local Merchant using the Sectional Model Code x No. of Sections needed, noting the Mounting Option and the name and number of the colour you have chosen; e.g ANCO360W x 20 sections, RAL 9016 Traffic white, with welded feet.

If you have chosen a colour use the colour reference ‘R’ instead of ‘W’ and list the colour number and name.

All prices and outputs are given per section in the tables on pages 136-137 . Price per section includes plugs, bushes and diverter. Mounting options must be selected separately, these will include the air vent and appropriate number of wall ties.

Ancona® Made to Order - Colours & Special Finishes

The Ancona ® made to order range is available in 188 RAL colours including our standard White RAL 9016, a bright porcelain white. We also offer 32 special finishes including Gun Metal Grey, Mottled Silver and Copper, Metallics, Pastels, Golds & a Bare Metal Lacquer finish. Please call 01342 302250 for a RAL chart & Special Finish chart.

Match your room style by selecting from a full rainbow of 188 RAL colours. Use either contrasting colours to create a bold statement or sympathetic colours so your Ancona ® blends in to your wall.

32 Special Finishes including a Bare Metal Lacquer finish

There are 32 colours to choose from including: pastels, matts, metallics, mottled, textured effects, as well as bare metal lacquer finish, for a Special Finish chart please call our Customer Service team on 01342 302250

Helpful notes & advice

Please call us on 01342 302250 if you need any further information or help with specifying your Ancona ® Ancona ® sections are 45mm wide, therefore the total radiator length is; “no. of Sections x 45mm + 26mm for bushes + valves” ( Please note due to manufacturing tolerances widths shown may vary by +/- 2mm). When considering the height of your radiator remember that your mounting option will affect the overall height of your radiator. Made To Order Anconas ® are supplied factory assembled up to a maximum of 40 sections. For radiators outside these parameters there is an additional joining charge. Please consult Customer Services to discuss alternative requirements.

Ancona® Made to Order shown on

Specify your radiator online; Use our Online Radiator Builder to quickly and easily specify your radiator. Go to our website theradiatorcompany.co.uk

Use these tables to specify your radiator by following these steps;

Calculate the heat output you need for your room, using our online BTU (Heat Output) Calculator or check with your installer, remember you may need more than one radiator to heat your room.

Use the tables below & right to find the best size to suit your space and heat output you need; if you cannot get the right size & output combination from a 2 column radiator try an alternative height or column (depth) option, see page 134 for more details on how to size your radiator.

Choose the style of mounting option you want; standard wall brackets are included in the radiator price (universal wall brackets for lacquer finishes). If selecting cast feet or welded feet there is an additional cost, see pricing tables on page 139

Choose your colour from a choice of 188 RAL colours and 32 special finishes including bare metal lacquer, s ee page 135

All prices and outputs are given per section in the tables below. Price per section includes plugs, bushes, diverter, wall brackets and wall ties. Alternative mounting options must be selected separately, these will include the air vent and appropriate number of wall ties.

Made To Order Anconas ® are supplied factory assembled up to a maximum of 40 sections. For radiators outside these parameters, there is an additional joining charge. Please consult Customer Services to discuss alternative requirements.

Pipe Centres for all White & Colour Anconas with Cast Feet, Welded Feet or Wall Brackets are;

Pipe centres left to right = number of sections x 45mm plus 26mm (13mm each) for bushes plus valves.

Note due to manufacturing tolerances widths may vary by +/- 2mm

2 Column = 64mm to 74mm

Pipe centres from wall (based on adjustable wall ties)

3 Column = 82mm to 92mm

4 Column = 102mm to 112mm

5 Column = 120mm to 130mm

6 Column = 140mm to 150mm

2 Column - 65mm Deep

Column - 101mm Deep

Please note Bare Metal Lacquer is not available in 195mm high Please note Bare Metal Lacquer is not available in 195mm high

Please note Bare Metal Lacquer is not

• All prices and outputs are given per section.

• Price per section includes plugs,bushes,air vent and wall ties.

each section gives.Divide your required output by this number to find the total number of sections needed to match the output;

Ancona® Made to Order - Wall Brackets

• Please specify with Cast Feet or with Wall Brackets when you place your order.

These simple steps will help you choose a product that matches your requirements.

e.g.if you have chosen a 3 column 592mm high then 7680

BTUs divided by 210 BTUs per section = 37 sections.

5 – Size the finished product & double check

Each section regardless of how many columns it has is 45mm wide,so a 37 section radiator will equal 37 x 45mm = 1665mm wide,plus bushes plus valves.

Once you have chosen your radiator size you can choose any one of our 3 mounting options & specify at time of order (fittings are available to order with a corresponding radiator only).

TRCM3C59W5921.4262210

1

– Calculate the output & number of radiators

To find the output you require for each radiator first work out the heat output for your room.

For a more detailed explanation please see page four or visit our website at www.theradiatorcompany.co.uk

f this is too wide then either increase the height of each section or choose a section with more columns.For example; 3 column 742mm high = 7680 BTUs divided by 257 BTUs per section = 30 sections = 1350mm wide.

Standard wall brackets are included in your radiator price. The correct number of brackets and wall ties will be supplied with each order; prices for extra wall brackets and wall ties are available on request, please call 01342 302250

TRCM4C59W5921.9380274

or 4 column 592mm high = 7680 BTUs divided by 274 BTUs per section = 28 sections = 1260mm wide.

£18.34£21.55

£18.79£22.08

TRCM4C74W7422.3199337 £19.74£23.19

If you have a large room,divide this number by the total number of radiators you need in the room.e.g.a lounge 16’ x 20’ x 8’ ceilings = a volume of 2560 x 6 = 15,360 BTUs. Two radiators would be required which = 7680 BTUs each. Your installer will also be able to help you decide this,if required.

Please note.

Technical & pipe centre information of each mounting option is shown below / right.

The TRC Multi Column is supplied as a finished radiator with B.O.E.(Bottom Opposite End) connections as standard and comes assembled up to a maximum of 40 sections or 100kg in weight.For radiators outside these parameters please consult the sales office for advice and confirmation of extra charges if required.

Please note: Anconas® in a bare metal lacquer finish are only available to be mounted with universal wall brackets or welded feet.

2 – Choose the number of Columns TRC Multi Columns are available in a choice of three column depths,2,3 and 4 columns.More columns equals greater depth,bigger water content and therefore a higher output, however choice is generally down to aesthetics.

3 – Choose a Height

All column depths are available in the same range of 15 heights,from 220mm to 2500mm.Decide on a section height that matches the size you require,allowing an additional 100mm to 150mm for valves and/or cast feet.

6 – Choose the mounting option

Your TRC Multi Column can be supplied in one of two mounting options,either with Cast Feet or with Wall Brackets. • Cast feet give the finished radiator a traditional look - see page 57.

• With Wall brackets you have the freedom to position your TRC Multi Column at any height - see page 56.

Standard wall brackets technical & pipe centre information (suitable for stud walls) (appropriate for all finishes except Bare Metal Lacquer)

Can be positioned at any height (minimum height from floor 100mm); brackets are supplied with raw plugs.

Pipe centres from wall:

2 column = 64mm - 74mm

3 column = 82mm - 92mm

4 column = 102mm - 112mm

5 column = 120mm - 130mm

6 column = 140mm - 150mm

Ancona Bench Seat

Shown on page 55 ModelHeightWidth

Bare metal lacquer universal wall brackets (suitable for stud walls)

Note: Ancona’s with lacquer wall brackets can be positioned at any height (minimum 100mm from floor)

£314.86£369.96

ANCO4C60X15+WF1560069028.3512304198 £398.01£467.66

ANCO4C60X20+WF2060092037.8016405597 £481.15£565.35

ANCO4C60X25+WF25600115047.2520506997 £638.59£750.34

ANCO4C75X10+WF1075046023.1010103447 £316.05£371.36

ANCO4C75X15+WF1575069034.6515155171 £403.54£474.16

ANCO4C75X20+WF2075092046.2020206894 £491.02£576.95

ANCB4S381338813008873027£470.83£612.10£553.23£719.22 ANCB5S4313434130011083783£531.52£690.94£624.54£811.85 ANCB6S4813480130013304540£594.47£772.84£698.50£908.09 ANCB4S3816388160010613621£545.50£709.16£640.96£833.26

Pipe centres from wall:

ANCB5S4316434160013264526£608.15£790.59£714.58£928.94

2 column = 56mm

ANCB6S4816480160016865756£685.59£891.26£805.57£1,047.23

3 column = 74mm

ANCB4S3819388190012644313£597.84£777.18£702.46£913.19

4 column = 93mm

ANCB5S4319434190015805391£687.95£894.33£808.34£1,050.84

5 column = 112mm

ANCB6S4819480190018956469£780.30£1,014.38£916.85£1,191.90

6 column = 131mm

ANCB4S3821388210014004778£642.08£834.71£754.44£980.78

ANCB5S4321434210017505972£741.40£926.52£871.15£1,088.66

ANCB6S4821480210021007166£843.06£1,095.98£990.60£1,287.78

ANCB4S3826388260017135848£787.38£1,023.59£925.17£1,202.72

ANCB5S4326434260021427310£908.68£1,181.30£1,067.70£1,388.03

ANCB6S4826480260025708772£1,033.47£1,343.52£1,214.33£1,578.64

Build your radiator using our online radiator builder on our new and improved website

It is vital to know the correct heat output you need to keep your room warm, use our online BTU (heat output) calculator to get a guide to your requirements which you can then check with your installer.

Once you know your outputs use our online radiator builder to select the best solution for your room. It will take you through the process quickly and easily and allows you to save your ideas to your own Favourites List . Please go to our website theradiatorcompany.co.uk

To find your nearest Showroom or Merchant: Tel. 08707 302250 www.theradiatorcompany.co.uk

Optional Solid Brass Wall Ties & Airvents

These solid brass wall ties provide a stylish finishing touch to any Ancona ® radiator; select to match your valves. Available as a kit including matching airvent in Antique Brass, Chrome and Brushed Nickel. Please note that these wall ties and airvents are an optional extra and do not come as standard with your Ancona ® radiator.

Please specify your finish at time of order.

Ancona® Made to Order - Floor Mounting Options

Multi Column

Once you have chosen your radiator size you can choose to have your Ancona ® floor mounted by selecting either Welded or Cast Feet (fittings are available to order with a corresponding radiator only).

The TRC Multi Column range is incredibly versatile with literally hundreds of possible sizes,in a choice of mounting options.

• All prices and outputs are given per section.

Please note; Welded Feet and Cast Feet are an additional cost to your radiator price. The correct number of wall ties will be supplied with each order; prices for extra cast feet and wall ties are available on request, please call 01342 302250

• Price per section includes plugs,bushes,air vent and wall ties.

• Please specify with Cast Feet or with Wall Brackets when you place your order.

These simple steps will help you choose a product that matches your requirements.

4 – Calculate the number of sections you require Listed next to each section height under ‘BTUs’ will be the output each section gives.Divide your required output by this number to find the total number of sections needed to match the output; e.g.if you have chosen a 3 column 592mm high then 7680 BTUs divided by 210 BTUs per section = 37 sections.

5 – Size the finished product & double check Each section regardless of how many columns it has is 45mm wide,so a 37 section radiator will equal 37 x 45mm = 1665mm wide,plus bushes plus valves.

Please specify your preferred floor mounting option & kit number at time of order. Technical & pipe centre information of each mounting option is shown below

1 – Calculate the output & number of radiators

To find the output you require for each radiator first work out the heat output for your room.

For a more detailed explanation please see page four or visit our website at www.theradiatorcompany.co.uk

Cast feet kit prices

TRCM4C59W5921.9380274 £18.79£22.08

If you have a large room,divide this number by the total number of radiators you need in the room.e.g.a lounge 16’ x 20’ x 8’ ceilings = a volume of 2560 x 6 = 15,360 BTUs. Two radiators would be required which = 7680 BTUs each. Your installer will also be able to help you decide this,if required.

2 – Choose the number of Columns

f this is too wide then either increase the height of each section or choose a section with more columns.For example; 3 column 742mm high = 7680 BTUs divided by 257 BTUs per section = 30 sections = 1350mm wide. or 4 column 592mm high = 7680 BTUs divided by 274 BTUs per section = 28 sections = 1260mm wide.

Please note.

The TRC Multi Column is supplied as a finished radiator with B.O.E.(Bottom Opposite End) connections as standard and comes assembled up to a maximum of 40 sections or 100kg in weight.For radiators outside these parameters please consult the sales office for advice and confirmation of extra charges if required.

Note: please remember to add 100mm to the height of the Ancona ® section you have chosen if you are using Cast Feet. 100mm

TRC Multi Columns are available in a choice of three column depths,2,3 and 4 columns.More columns equals greater depth,bigger water content and therefore a higher output, however choice is generally down to aesthetics.

3 – Choose a Height

6 – Choose the mounting option

Your TRC Multi Column can be supplied in one of two mounting options,either with Cast Feet or with Wall Brackets.

• Cast feet give the finished radiator a traditional look - see page 57.

• With Wall brackets you have the freedom to position your TRC Multi Column at any height - see page 56. All sections are

Multi Column with Cast Feet or

All column depths are available in the same range of 15 heights,from 220mm to 2500mm.Decide on a section height that matches the size you require,allowing an additional 100mm to 150mm for valves and/or cast feet.

Pipe centres from wall:

2 column = 64mm - 74mm

3 column = 82mm - 92mm

4 column = 102mm - 112mm

5 column = 120mm - 130mm

6 column = 140mm - 150mm

Ancona Bench Seat

£343.53£403.65

ANCO3C60X20+WF2060092028.6012804369 £410.78£482.67

ANCO3C60X25+WF25600115035.7517505973 £548.92£644.98

ANCO3C75X15+WF1575069026.1012004096 £364.73£428.56

ANCO3C75X20+WF2075092034.8017505973 £437.86£514.49

ANCO4C60X10+WF1060046018.908202799 £314.86£369.96

ANCO4C60X15+WF1560069028.3512304198 £398.01£467.66

ANCO4C60X20+WF2060092037.8016405597 £481.15£565.35

ANCO4C60X25+WF25600115047.2520506997 £638.59£750.34

ANCO4C75X10+WF1075046023.1010103447 £316.05£371.36

ANCO4C75X20+WF2075092046.2020206894 £491.02£576.95

Please note: cast feet are not available for bare metal lacquer finishes

Shown on page 55 ModelHeightWidth

ANCB4S381338813008873027£470.83£612.10£553.23£719.22

ANCB5S4313434130011083783£531.52£690.94£624.54£811.85

ANCB6S4813480130013304540£594.47£772.84£698.50£908.09

ANCB4S3816388160010613621£545.50£709.16£640.96£833.26

ANCB5S4316434160013264526£608.15£790.59£714.58£928.94

ANCB6S4816480160016865756£685.59£891.26£805.57£1,047.23

ANCB4S3819388190012644313£597.84£777.18£702.46£913.19

Note: Please remember to add 97mm to the height of the Ancona ® section you have chosen if you are using Welded Feet.

ANCB5S4319434190015805391£687.95£894.33£808.34£1,050.84

ANCB6S4819480190018956469£780.30£1,014.38£916.85£1,191.90

ANCB4S3821388210014004778£642.08£834.71£754.44£980.78

ANCB5S4321434210017505972£741.40£926.52£871.15£1,088.66

ANCB6S4821480210021007166£843.06£1,095.98£990.60£1,287.78

ANCB4S3826388260017135848£787.38£1,023.59£925.17£1,202.72

ANCB5S4326434260021427310£908.68£1,181.30£1,067.70£1,388.03

ANCB6S4826480260025708772£1,033.47£1,343.52£1,214.33£1,578.64

Welded Feet kit prices Anconas ® with Welded Feet are supplied with the correct number of feet (see above); additional Welded Feet cannot be ordered.

Pipe centres from wall:

2 column = 64mm - 74mm

3 column = 82mm - 92mm

4 column = 102mm - 112mm

5 column = 120mm - 130mm

6 column = 140mm - 150mm Bare metal lacquer Welded Feet pipe centres

Ancona® Console Table

shown on pages 26-27

High quality Italian design and manufacture

Steel multi-column console with a choice of Ash, Oak or Walnut timber tops

CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard with an Ash top 23 RAL colours, 31 Special Finishes & 6 Feature Finishes with Ash, Oak or Walnut tops

Please call 01342 302250 for a RAL or Special Finish chart & for Feature Finish samples

Stock Sizes: 48-72 Hours White RAL 9016 (with Ash Console Top).

Made to Order: Up to 4 weeks for White RAL 9016 with Oak or Walnut Tops and up to 4 weeks for Colours with Ash, Oak or Walnut Tops

The classic Ancona® multi column configured in a refined, furniture-style format. Standing 971mm high, the new Ancona® Console Table is ideally proportioned for hallways and entrance areas, or for use as a slim console or side table.

Combining a practical shelf and heat source in one. A choice of solid timber tops in Ash, Oak or Walnut and a selection of 60 radiator colours, allows the Ancona® Console Table to suit both contemporary and more traditional interiors. All tops are 250mm deep and 25mm thick. White radiators with Ash tops are available from stock, Oak and Walnut tops and painted finishes are made to order.

Available in 3 or 4 column configurations, and a selection of widths the design offers adaptable heat output while retaining the clean lines and balanced symmetry of the Ancona® range.

Console table top options: Ash is supplied as standard. Please specify at the time of order if you require Oak or Walnut.

Colours and Special Finishes

The Ancona® Console Table is available in an extensive range of finishes, allowing it to be tailored to a wide variety of interior schemes. Details of our Colours are outlined below. For a Special Finish chart, as well as RAL and Feature Finish sample swatches, please contact Customer Services on 01342 302250

Match your room style with a choice of 23 RAL colours. Select a contrasting finish for a bold statement, or choose a complementary tone to allow your Ancona® Console Table to blend seamlessly with the surrounding wall. See page 216 for all 23 RAL Colours.

to be specified as a subtle complement to its surroundings or as a distinctive design feature in its own right.

range allows the

3 Column Made to order RAL Colours (please specify finish at time of order)

Please add 10% to the RAL price to work out your Special or Feature Finish price.

Solid timber Ash console table top supplied as standard. Please specify (Oak, or Walnut) at time of order.

4 Column Made to order RAL Colours (please specify finish at time of

Please add 10% to the RAL price to work out your Special or Feature Finish price.

timber Ash console table top supplied as standard. Please specify (Oak, or Walnut) at time of order.

Ancona® Bench Seat Vertical shown on page 28

High quality Italian design and manufacture

Steel multi-column bench with a choice of Ash, Oak or Walnut timber tops CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard with an Ash top 23 RAL colours, 31 Special Finishes & 6 Feature Finishes with Ash, Oak or Walnut tops

Please call 01342 302250 for a RAL or Special Finish chart & for Feature Finish samples

Stock Sizes: 48-72 Hours White RAL 9016 (with Ash Bench Top).

Made to Order: Up to 4 weeks for White RAL 9016 with Oak or Walnut Tops and up to 4 weeks for Colours with Ash, Oak or Walnut Tops

The Ancona® Vertical Bench Seat range now includes solid timber bench tops in Ash, Oak, and Walnut, each adding natural warmth and architectural character. White RAL 9016 models with Ash tops are available from stock for faster delivery without compromising on design or quality.

4 Column Stock White RAL 9016 with Ash Top sizes & prices (Oak & Walnut Tops delivered

4 Column made to order prices for RAL Colours (please specify finish at time of order)

Please add 10% to the RAL price to work out your Special or Feature Finish price.

Details of our RAL Colours, Special Finishes and Feature Finishes are outlined on page 140. Solid timber Ash Bench top supplied as standard. Please specify (Oak, or Walnut) at time of order.

Solid timber Ash Bench top supplied as standard. Please specify (Oak, or Walnut) at time of order.

Please add 10% to the RAL price to work out your Special or Feature Finish price.

Solid timber Ash Bench top supplied as standard. Please specify (Oak, or Walnut) at time of order.

Please note: Colours shown are for guidance only. As wood is a natural material, variations in colour and grain will occur, and the finished product may differ slightly from the images shown.

Colours and Special Finish options (page 140)

Please add 10% to the RAL price to work out your Special or Feature Finish price.

The Ancona® Bench Seat Vertical is available in an extensive range of finishes, allowing it to be tailored to a wide variety of interior schemes. Details of our RAL Colours, Special Finishes and Feature Finishes are outlined on page 140.

Please note: Radiators widths up to 1151mm will be supplied with 2 feet. Radiators with widths of 1511mm and above will be supplied with 4 feet.

Pipe centres = width of radiator (B) + valves

Due to manufacturing tolerances widths may vary by +/- 2mm.

*Saving based on the value of individual items when bought separately. Order any of our selected valves & matching pipe covers at the same time as your radiator.

Ancona® Curved shown on page 29

High quality Italian design & manufacture

Steel Multi Column ; 2, 3 & 4 column options with wall brackets or optional Welded Feet CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours, Bare Metal Lacquer & 31 Special Finishes.

Please call 01342 302250 for a RAL or Special Finish chart

Approximately 6-8 weeks from receipt of written sign off of technical drawings Visit our website for further information theradiatorcompany.co.uk.

Alternative heights are available on request, please contact us on 01342 302250 if required. Radiators can be curved using up to 40 sections, minimum 10 sections (450mm).

As with all radiators, it is essential to know how much heat you need to keep your room comfortable. Use our online Heat Output Calculator to work out how much heat you will need for your room before you size your radiator.

Curving is a precise process and as such, accurate measurements and calculations must be made and checked before production can begin. Since our Ancona® Curved is made on a bespoke basis to your exact requirements, we have created an online tool to help make the process as easy as possible;

To order your curved radiator follow these simple steps;

Go to our website theradiatorcompany.co.uk and select the 'Curved Ancona ®' in the column section, read the curved specification instructions which explains how to measure for your curved radiator

Select 'Buy Radiator' to use our online Curved Radiator Builder, please then fill in all sections.

When you have reviewed the technical specification, double-check everything is correct to see how your radiator will fit in your space

Print the technical specification pdf and sign all pages once you are happy with the details

Use the signed technical specification to place your order with your Installer / local merchant, the merchant will need to provide a copy of the signed drawing when placing the order.

Alternatively, provide the measurements to your installer/ merchant who can then place an order with us, we will create the drawings which you will need to check and sign off. However, additional time will be required for us to have drawings made and sent to you for approval, the order will remain on hold until the signed drawings are returned to us, we can then start the production process.

Please note; once you have signed off your drawings and ordered your curved radiator it cannot be cancelled or returned.

Curved 2 column (output by section)

Ancona® Curved 3 column (output by section)

Internal Ancona® Curved

Kits for Welded Feet

Note: Please remember to add 97mm to the height of the Ancona section you have chosen if you are using Welded Feet.

Ancona® Curved 4 column (output by section)

Ancona® Electric shown on pages 30-31

High quality Italian design & manufacture

Steel Multi Column in 2, 3 & 5 column options

Eco Design. 1200mm cable with pilot wire. Reversible for left or right power input. 10 year guarantee on the radiator. 2 year guarantee on the element

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. NEW Bare Metal Lacquer finish available. Please call 01342 302250 for a RAL or Special Finish chart

Stock Sizes: 48-72 Hours. Made to Order Colours: Up to 5 weeks, Made to Order Bare Metal Lacquer: Up to 7 weeks.

Our Ancona Electric range features a new element design with 2, 3 and 5 column options, available in both horizontal and vertical formats, and is now available in a new bare metal lacquer finish. It combines the classic Ancona look with the convenience of a fully controllable electric element operated via an IR remote control. Function modes include a customisable weekly programme, Adaptive Start-up Control, child lock, comfort, Eco, antifreeze, holiday and standby modes, plus open window detection and pilot wire compatibility for home automation.

Relax Hybrid shown on page 33

High quality Italian design & manufacture. Fan assisted radiator with a cooling option

Suitable for low-temperature systems and heat pumps.

Available in 5 colours: Matt White, Grey Skies, Grey Sparkle, Carbon & Sand. Optional LED lighting system. Touch display on side of radiator, Insulation Class I Horizontal models are configurable with right or left connections, please specify at time of order.

Delivered in up to 6 weeks

10YearGu arante e uGraeY etnara e

Innovative heating and cooling combination, with a fan coil assisted radiator and cooling functions. Heats in winter and with appropriate system specification acts as a cooling unit in summer.

• Available in 2 heights; 650 and 1800mm

• 4 widths; 630, 920, 1120 and 1320mm

Slimline contemporary design

• 3 operating modes (see below)

• Horizontal models are configurable with right or left connections.

• Choice of 5 colours (see below)

• LED lighting system (optional).

The onboard control panel, allows you to set your required room temperature, season (summer or winter), and the operation mode:

Automatic Mode; auto-regulation of the fan speed from a minimum value to maximum, to achieve the required temperature.

Night Mode; fan speed is reduced to guarantee quiet operation & comfort.

Boost Mode; gives maximum available power immediately, in both heating and cooling modes. As the room temperature reaches the required value, the fan speed is automatically reduced to save energy.

To work as an air cooler the Relax Hybrid should be connected to a system powered by a heat pump, and which has been designed to manage the circulation of cold water.

When operating in air cooling mode, the Relax Hybrid automatically isolates the heating components to prevent the formation of condensation. For correct installation, it is essential for the system to have, a hot/insulated cold water supply, an electric connection and a facility to drain off condensation when operating in air cooling mode.

When installed in a traditional system with a boiler, the Relax Hybrid guarantees maximum heating efficiency, thanks to its hybrid operation utilising both radiant heat and fan assisted air movement. This method, quickly reaches and maintains the ideal temperature throughout the room.

Please call customer services for sample swatches.

Please note all Relax Hybrid models are supplied with a Grey Sparkle frame.

High quality Italian design & manufacture.

Fan assisted radiator with a cooling option

Suitable for low-temperature systems and heat pumps.

Available in 5 colours: Matt White, Grey Skies, Grey Sparkle, Carbon & Sand. Optional LED lighting system. Touch display on side of radiator, Insulation Class I

Horizontal models are configurable with right or left connections, please specify at time of order.

Delivered in up to 6 weeks

Pipe centres left to right Depth from wall 50mm 107

Horizontal Made to order

-without LED

Horizontal Made to order options -with LED

Please specify right or left handed at time of order.

Vertical Made to order

Vertical Made to order options -with LED

Relax Air shown on page 34

High quality Italian design & manufacture.

Designer radiator with integrated fans for increased output.

Touch button control - turns the fans on or off and sets desired fan speed

Suitable for low-temperature systems and heat pumps.

Can be controlled by third-party home automation using a pilot wire. 12v adaptor included

White RAL 9016 as standard, 188 RAL colours and 31 Special Finishes

Please call 01342 302250 for a RAL or Special Finish chart

Delivered in up to 9 weeks

A cost effective solution to boost output for radiators in small spaces and for low temperature/renewable energy systems. A series of quiet, low voltage fans can be engaged to increase heat output, boosting the effectiveness of smaller radiators and those running on lower flow temperatures

Sound Pressure

For details of all sound pressures please call customer services on 01342 302250 or visit https://www.theradiatorcompany.co.uk/relax-air.html

For details of all sound pressures please call customer services on 01342 302250 or visit https://www.theradiatorcompany.co.uk/relax-air.html Pipe centres left to right Pipe

Sound Pressure

High quality Italian design & manufacture.

Modern designer casing and radiator with hidden valve unit and flexible hose connections, for ease of fitting and minimising exposed pipework.

Touch button control - turns the fans on or off and sets desired fan speed

Suitable for low-temperature systems and heat pumps.

Pilot wire for home automation.

Optional Ideal TRV head available see bottom of page for details.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes

Please call 01342 302250 for a RAL or Special Finish chart

Delivered in up to 9 weeks

This stylish modern design has the ability to boost heat output with its series of quiet, low voltage fans. Three fan speeds allow heat output to be boosted by a factor of up to 2.5 in horizontal models and 1.5 in vertical. Supplied with a concealed hydraulic connection system, with valve body and lockshield, connected via flexible hoses. An optional thermostatic head can be fitted to the valve body.

For details of all sound pressures please call customer services on 01342 302250 or visit https://www.theradiatorcompany.co.uk/relax-style.html

For details of all sound pressures please call customer services on 01342 302250 or visit https://www.theradiatorcompany.co.uk/relax-style.html

Optional Ideal TRV Head

Optional Ideal TRV head that can be fitted on the bottom left of the radiator. Available in White, Chrome (shown right) as well as Antique Brass, Antique Copper, Black and Nickel. See page 117 for all finishes. Please specify the finish at the time of order.

High quality design & manufacture.

Extruded Aluminium radiator with low water content CE/UKCA approved & certified to BS EN442.

Matt White or Flat Anthracite as standard Plus 188 RAL colours. All finishes will have a light texture.

Please call 01342 302250 for a RAL chart.

Stock Matt White or Flat Anthracite: 48-72 Hours. Made to Order RAL Colours: Up to 4 weeks.

Pipe centres left to right Pipe centres from wall

+ valves

596

Matt White or Flat Anthracite as standard Plus 188 RAL colours. All finishes will have a light texture. Please call 01342 302250 for a RAL chart.

Stock Matt White or Flat Anthracite: 48-72 Hours. Made to Order RAL Colours: Up to 4 weeks.

Torré shown on pages 40-41

High quality Italian design & manufacture.

Ultra slimline extruded Aluminium profile with a curved edge CE/UKCA approved & certified to BS EN442.

Textured Matt White as standard, 23 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes, call 01342 302250 for samples. Colour Coordination Service available see page 217 for full details.

Stock Textured Matt White: 48-72 Hours. All Colours & Finishes: Up to 2 weeks.

Stock options Textured Matt White - Horizontal

Stock options Textured Matt White - Vertical

Sebino shown on pages 42-43

High quality Italian design & manufacture. 82mm sections Aluminium radiator CE/UKCA approved & certified to BS EN442.

White RAL 9010 and Matt Silver.

Stock White RAL 9010: 48-72 Hours

Made to order sizes: Up to 7 weeks White RAL 9010 Up to 9 weeks Matt Silver.

Pipe centres left to right Pipe centres from wall Depth from wall width + valves 50mm 80mm

*Saving based on the value of individual items when bought separately. Order

installation, use and maintenance instructions can be used in all hot water or vapour heating installations up working pressure up to 1600 K Pascal - 16 bar. installed in systems using iron, copper or thermoplastic pipes. problems due to incrustation and corrosion in the heating system must be filled and maintained with water having hardFrench degrees, the pH of the water should be checked (prefer ably 8) and it is recommended to introduce a suitable inhibitive Cillit-HS 23 Al or another product equal or similar in a litre to every 200 litres of circulating water in the system. manual air vent valves must be installed on radiators. closure of the radiator shut-off valves in order to allow any gas be inside the same to escape through the automatic air vent mandatory in any heating system, thus avoiding possible overcould damage the radiators. protection of painting, radiators must not be stored in very environments before and after installation such as

turkish baths, near swimming pools etc.

High quality design & manufacture.

Extruded Aluminium radiator with low water content CE/UKCA approved & certified to BS EN442.

Matt White or Flat Anthracite as standard Plus 188 RAL colours. All finishes will have a light texture. Please call 01342 302250 for a RAL chart.

Stock Matt White or Flat Anthracite: 48-72 Hours. Made to Order RAL Colours: Up to 4 weeks.

note due to manufacturing tolerances widths shown may vary by +/- 2mm.

High quality Italian design & manufacture. 95mm sections Aluminium radiator CE/UKCA approved & certified to BS EN442.

Stock White RAL 9010: 48-72 Hours. All Colours & Finishes: Up to 2 weeks.

Please

Water

High quality Italian design & manufacture. Steel; 70mm flat tubes with 30mm collectors. Underneath (B2) connections as standard CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes, call 01342 302250 for samples. Colour Coordination Service available see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order RALs & Special Finishes: Up to 5 weeks.

Water Lily Pipe centres left to right Pipe centres from wall Depth from wall

Water Lily Single width - 84mm 55mm - 65mm 79mm - 89mm

Water Lily Double width - 84mm 67mm - 77mm 91mm - 101mm

Please note: underneath connections only

High quality Italian design & manufacture. Steel; 87mm, 133mm, 155mm 180mm & 187mm fins CE/UKCA approved & certified to BS EN442.

Matt White RAL 9016 as standard, 188 RAL colours 2 Special Finishes; Metallic Silver & Matt Black

Please call 01342 302250 for a RAL chart.

Made to Order sizes & colours: Up to 7 weeks

Made to order options - Horizontal White & Colours

Halo Horizontal Pipe centres left to right

Piano Horizontal shown on pages 50-51

Piano Oriz zontale

Horizontal

High quality Italian design & manufacture. Steel; 50mm flat tubes with 30mm collectors CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples.

Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Stock options White RAL 9016 - Single Horizontal

Stock

White RAL 9016 -

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

High quality Italian design & manufacture. Steel; 50mm flat tubes with 30mm collectors CE/UKCA approved & certified to BS EN442. WHEN YOU BUY OUR IDEAL TRV & PIPE COVERS WITH ANY DESIGNER PURCHASE. QUOTE PROMOV1 AT TIME OF ORDER. SAVE £45 * Available in White or Chrome. Ideal TRV & Pipe Covers

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

when

Relax Horizontal shown on page 52

High quality Italian design & manufacture.

Steel; Slimline round tube on tube radiator cloaked in a steel cover CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Stock options White RAL 9016 - Single Horizontal

Made to order options - Single Horizonta l

centres left to right

options White RAL 9016 - Double Horizontal

Relax Vertical shown

High quality Italian design & manufacture. Steel; Slimline round tube on tube radiator cloaked in a steel cover CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks. Polished Stainless Steel: Up to 7 weeks.

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

Made to order options - Inox Single Vertical Made to order options - Inox

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

*Saving based on the value of individual items when bought separately. Order any of our selected valves & matching pipe covers at the same time as your radiator; PROMOV1W (white), PROMOV1C (chrome).

Optional Relax Towel Bars

Adding a towel bar to your Relax radiator adds comfort and everyday practicality. The chrome bar provides a convenient place to warm and dry towels, keeping them cosy, hygienic and neatly stored. It complements the radiator’s clean, vertical lines while adding useful functionality.

Ellipsis 30mm Horizontal shown

High quality Italian design & manufacture. Steel; 15mm x 30mm oval tubes. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks

Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Ellipsis 30mm horizontal Pipe centres left to right Pipe centres from wall Depth from wall Single horizontal width - 60mm 55mm 84mm Double horizontal width - 60mm 80mm-90mm 109mm-119mm

Made to order options - Double Horizontal

High quality Italian design & manufacture. Steel; 15mm x 30mm oval tubes. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes.

Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples.

Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks

Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Ellipsis 30mm VS Ellipsis 50mm tubes

Distinctly smaller than the original, the new 30mm Ellipsis can be seen here, side by side with the Ellipsis with its 50mm tubes which can be found on pages 164-167.

Ellipsis pages 164-167

Ellipsis Single Horizontal shown on page 56

High quality Italian design & manufacture. Steel; 25mm x 50mm oval tubes. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016 & Textured Anthracite: 48-72 Hours Feature Finishes: Up to 2 weeks Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

Ellipsis Double Horizontal shown on

High quality Italian design & manufacture. Steel; 25mm x 50mm oval tubes. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes.

Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016 & Textured Anthracite: 48-72 Hours

Feature Finishes: Up to 2 weeks

Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

*Saving based on the value of individual items when bought separately. Order any of our selected valves & matching pipe covers at the same

Ellipsis Single Vertical shown on page

High quality Italian design & manufacture. Steel; 25mm x 50mm oval tubes. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016 & Textured Anthracite: 48-72 Hours Feature Finishes: Up to 2 weeks Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

Ellipsis Double Vertical shown

High quality Italian design & manufacture. Steel; 25mm x 50mm oval tubes. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016 & Textured Anthracite: 48-72 Hours Feature Finishes: Up to 2 weeks Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Pipe centres left to right Pipe centres from wall Depth from wall width + valves 80mm-90mm 120mm-130mm

Stock options White RAL 9016 - Double Vertical

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

to order options - Double Vertical

Sitar Single Horizontal shown on

High quality Italian design & manufacture. Steel; 23mm round tubes CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes.

Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples.

Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Pipe centres left to right Pipe centres from wall Depth from wall width - 50mm 55mm 90mm

Oriz zontale Horizontal

Sitar

Please add 10% to the RAL/Special Finish price to work out your Feature Finish

Oriz zontale Horizontal

High quality Italian design & manufacture. Steel; 23mm round tubes CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Pipe centres left to right Pipe centres from wall Depth from wall width - 50mm 79mm to 89mm 114mm to 124mm

Stock options White RAL 9016 - Double Horizontal *Saving

(for stock sizes)

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price Please call customer services on 01342 302250 for sample swatches.

Sitar Single Vertical shown on page 59

High quality Italian design & manufacture. Steel; 23mm round tubes CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

Sitar Double Vertical

High quality Italian design & manufacture. Steel; 23mm round tubes CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

High quality Italian design & manufacture. Steel; 20mm x 25mm tubes with 30mm collectors CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes.

Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples.

Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Stock options White RAL 9016 - Single Horizontal

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

x Oriz zontale Horizontal

WHEN YOU BUY OUR IDEAL TRV & PIPE COVERS WITH ANY DESIGNER PURCHASE. QUOTE PROMOV1 AT TIME OF ORDER. SAVE £45 * Available in White or Chrome.

x Oriz zontale Horizontal

Made to order options - Single Horizontal

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

x Oriz zontale Horizontal

High quality Italian design & manufacture. Steel; 20mm x 25mm tubes with 30mm collectors CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Stock options White RAL 9016 - Single Vertical

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

Sectional Stocked Aluminium

All our sectional aluminium is held in stock in the UK. White product can be delivered in 48-72 hours and coloured orders will be finished and delivered in up to 2 weeks. Our most popular sizes are listed in the price tables, for other sizes use our online radiator builder or follow the instructions below to specify your radiator.

Choose your radiator using our online radiator builder

Once you know your outputs use our online radiator builder to select the best solution for your room. It will take you through the process quickly and easily and allows you to save your ideas to your own Favourites List. Go to our website theradiatorcompany.co.uk

It is vital to know the correct heat output you need to keep your room warm. Use our online Heat Output Calculator to get a guide to your requirements which you can then check with your installer.

Once you know your outputs you can also use the brochure to specify your radiator by following these steps (or call our Customer Services team on 01342 302250 who will help you size your radiator)

Note the space you have in mind for the radiator(s) you need; vertical or horizontal, length, height & depth

• Select a column option and height that fits your space; Calculate the number of Sections you need by dividing the required BTU (Watt) output with the output per section; e.g 4811 BTUs divided by 420 = 11.45, (we always suggest rounding up, as it is better to have too much output, than too little) therefore 12 sections based on Vip 590

• If using that section size does work in the space available, try a different height or alternative aluminium profile

• Once you have calculated the best number and size of section, select your colour. Our Aluminium Radiators are available in a selection of the top 23 most popular colours from the RAL range and 31 Special Finishes (shown on pages 65 & 216). Please specify your RAL colour, Special or Feature finish at time of order. White RAL 9010 is our standard for the Vip, Oscar, Vox and Mix.

• Work out the price of your radiator by multiplying the section price by the total number of sections; e.g Vip 590mm high, 12 sections in RAL 3000 - Flame Red = £82.16 x 12 = £985.44 (inc VAT)

• Place your order by using the Sectional Model Code x No. of Sections needed and noting the colour number and name selected; e.g VIP59 X 12 in RAL 3000

• If you have chosen a colour make sure you list the colour number and name All prices and outputs are given per section in the tables on pages 176-183. Price per section includes plugs, bushes and diverter. End Panels for the Vip & Oscar must be specified at time of order, please see page 175 for more information.

Aluminium Colours

All our Sectional Aluminium radiators are available in a selection of the top 23 most popular colours from the RAL range as well as 31 exclusive special finishes and 6 feature finishes. These radiators provide both the efficiencies of aluminium and a stunning finish. Available in up to 2 weeks. Please call 01342 302250 for a RAL or Special Finish chart

Feature Finishes

Painted in the UK, our Feature Finishes give a personal touch to any room, choose from Vintage Green, Satin Gold, Aged Brass, Textured Anthracite, Copper and Pearl Bronze . Please call customer services on 01342 302250 for sample swatches.

Colour Coordination Service

Available for all sectional aluminium, see product pages 217 for full details including process & lead times.

Aluminium Accessories

These towel bars and pegs are designed to fit all of our sectional aluminium ranges. Ideal for providing additional hanging space to air towels or hang bathrobes. Available from stock in 48-72 hours.

320mm Towel Bars need a

Towel Bars

A nominal £5 charge for postage and packing will be applied to any orders under £50 Ex VAT in value

Complete the look with End Panels

Please specify at time of order if you would like End Panels with your Vip radiator

Oscar End Panels stock options RAL 9010

Please specify at time of order if you would like End Panels with your Oscar radiator

Joining larger radiators

Sectional aluminium radiators are supplied pre-assembled up to a maximum of 20 sections. For radiators outside these parameters there is an additional joining charge of £35, please consult Customer Services to discuss alternative requirements on 01342 302250. All sectional radiators come supplied as a finished radiator with ½" B.O.E. (Bottom Opposite End) connections as standard

Vip shown on pages 66-67

High quality Italian design & manufacture. Sectional Aluminium. CE/UKCA approved & certified to BS EN442.

White RAL 9010 as standard, 23 RAL colours, 31 Special Finishes & 6 Feature Finishes. Please call 01342 302250 for RAL/Special Finish charts & Feature Finish samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9010: 48-72 Hours

Colours & Special / Feature Finishes: Up to 2 weeks

Choose from our assembled stock options or build your own size by individual section, visit theradiatorcompany.co.uk to use our radiator builder.

Assembled stock options RAL 9010

WHEN YOU BUY OUR IDEAL TRV & PIPE COVERS WITH ANY DESIGNER PURCHASE. QUOTE PROMOV1 AT TIME OF ORDER. SAVE £45 * Available in White or Chrome.

Widths include measurement for bushes

Quoted prices include plugs, bushes, air vent and wall brackets but excludes end panels.

Optional end panels available, please specify at time of order, see page 175 for prices.

+ valves 67mm to 71mm 114mm to 118mm

Optional end panels available for the Vip range, see page 175 for more information and pricing.

Please specify at time of order.

Widths include measurement for bushes Quoted prices include plugs, bushes, air vent and wall brackets but excludes end panels.

Optional end panels available, please specify at time of order, see page 175 for prices.

Feature Finishes

Please call customer services on 01342 302250 for sample swatches.

Stock options by section RAL 9010

Vip End Panel

Note:

Oscar shown on pages 68-69

High quality Italian design & manufacture. Sectional Aluminium. CE/UKCA approved & certified to BS EN442.

White RAL 9010 as standard, 23 RAL colours, 31 Special Finishes & 6 Feature Finishes. Please call 01342 302250 for RAL/Special Finish charts & Feature Finish samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9010: 48-72 Hours Colours & Special / Feature Finishes: Up to 2 weeks.

Choose from our assembled stock options or build your own size by individual section, visit theradiatorcompany.co.uk to use our radiator builder.

Assembled stock options RAL 9010

RAL colours are shown on page 216

RAL colours are shown on page 216

WHEN YOU BUY OUR IDEAL TRV & PIPE COVERS WITH ANY DESIGNER PURCHASE. QUOTE PROMOV1 AT TIME OF ORDER.

£45 * Available in White or Chrome.

Widths include measurement for bushes

Quoted prices include plugs, bushes, air vent and wall brackets but excludes end panels.

Optional end panels available, please specify at time of order, see page 175 for prices.

OSCA10X6 - 1046mm x 500mm

Optional end panels available for Oscar range, see page 175 for more information and pricing. Oscar End Panel

Please specify at time of order

Widths include measurement for bushes Quoted prices include plugs, bushes, air vent and wall brackets but excludes end panels.

Optional end panels available, please specify at time of order, see page 175 for prices.

Outputs & price given per section, see page 174 for help on sizing your radiator or visit theradiatorcompany.co.uk where you will find our radiator builder.

Note: Supplied pre-assembled up to 10 sections (800mm), wider radiators will incur a £35 joining fee. Please consult Customer Services to discuss alternative requirements on 01342 302250.

High quality Italian design & manufacture. Sectional Aluminium. CE/UKCA approved & certified to BS EN442.

White RAL 9010 as standard, 23 RAL colours, 31 Special Finishes & 6 Feature Finishes. Please call 01342 302250 for RAL/Special Finish charts & Feature Finish samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9010: 48-72 Hours Colours & Special / Feature Finishes: Up to 2 weeks.

Choose from our assembled stock options or build your own size by individual section, visit theradiatorcompany.co.uk to use our radiator builder.

Assembled stock options RAL 9010

Quoted prices include plugs, bushes,

vent and

brackets. Widths include measurement for bushes

Widths include measurement for bushes

Quoted prices include plugs, bushes, air vent and wall brackets.

Outputs & price given

Note:

Mix shown on pages 72-73

High quality Italian design & manufacture. Sectional Aluminium. CE/UKCA approved & certified to BS EN442.

White RAL 9010 as standard, 23 RAL colours, 31 Special Finishes & 6 Feature Finishes. Please call 01342 302250 for RAL/Special Finish charts & Feature Finish samples. Colour Coordination Service available on stock sizes see page 217 for full details.

Stock White RAL 9010: 48-72 Hours Colours & Special / Feature Finishes: Up to 2 weeks.

Choose from our assembled stock options or build your own size by individual section, visit theradiatorcompany.co.uk to use our radiator builder.

Assembled stock options RAL 9010

RAL colours are shown on page 216

RAL colours are shown on page 216

TRV & Pipe Covers

SAVE £45 *

WHEN YOU BUY OUR IDEAL TRV & PIPE COVERS WITH ANY DESIGNER PURCHASE. QUOTE PROMOV1 AT TIME OF ORDER.

Available in White or Chrome.

Widths include measurement for bushes

Quoted prices include plugs, bushes, air vent and wall brackets.

Stock options by section RAL 9010

Note: Supplied pre-assembled up to 20 sections (1600mm), wider radiators will incur a £35 joining fee. Please consult Customer Services to discuss alternative requirements on 01342 302250.

Widths include measurement for bushes

Quoted prices include plugs, bushes,

Feature Finishes

Please call customer services on 01342 302250 for sample swatches.

Cast Iron

Our cast iron range includes a choice of ornate and plain schoolhouse designs. Available in a choice of finishes, including painted, polished and burnished, cast iron radiators can be specified by section so you can choose the right size for your space.

Choose your radiator using our online radiator builder

Once you know your outputs use our online radiator builder to select the best solution for your room. It will take you through the process quickly and easily and allows you to save your ideas to your own Favourites List. Go to our website theradiatorcompany.co.uk

It is vital to know the correct heat output you need to keep your room warm, use our online Heat Output Calculator to get a guide to your requirements which you can then check with your installer.

Once you know your outputs you can also use the brochure to specify your radiator by following these steps (or call our Customer Services team on 01342 302250 who will help you size your radiator)

Note the space you have in mind for the radiator(s) you need; vertical or horizontal, length, height & depth

Select a column option and height that fits your space; Calculate the number of sections you need by dividing the required BTU (Watt) output with the output per section; e.g 2400 BTUs divided by 300 = 8 sections, based on Ledbury 4 column, 660mm high sections (always round up to the next whole number of sections)

If using that section size doesn't work in the space available, try a different column option or if possible a different height

Once you have calculated the best number and size of section, select the best mounting option and kit; Footed End section or Cast Feet (for the Clifton, Ledbury, Wentworth and Henley only). Aston and Linton ranges are only available with Footed Ends.

Ledbury, Clifton, Henley & Wenworth radiators can be painted in a choice of 188 RAL colours, 10 classic cast iron finishes, a burnished or industrial finish plus Little Greene® & Farrow & Ball® Paints. The Aston can be painted in 188 RAL colours, 4 exclusive Aston Finshes, a polished finish and Little Greene® & Farrow & Ball® Paints. The Linton is available in 188 RAL colours, polished or burnished finishes, 3 special finishes as well as an Antique Brass or Galvanised Copper finish. Please specify your chosen colour at time of order. Please note: as a result of the casting process, cast iron radiators have a rough surface finish with small imperfections which will show after the painting process.

Work out the price of your radiator; e.g Ledbury 4 column, 660 high, 8 section, RAL

• Place your order with your local Merchant using the sectional model code x No. of sections needed, noting the mounting option and the name and number of colour you have chosen ; e.g LEDB4C660 x 8 sections, RAL 7044 Silk Grey with a closed Cast Feet kit

If you have chosen a colour make sure you list the colour number and name

All prices and outputs are given per section in the tables on pages 185-193. Price per section includes plugs, bushes and diverter. Mounting options must be selected separately, these will include the air vent and appropriate number of wall ties.

Larger cast iron radiator sizes that require on-site assembly will need a Joining Key.

The Heavy Duty Joining Key is available on a sale or return basis. Joining Keys must be specified at time of order for assistance please contact our Customer Service team on 01342 302250, they will also arrange a courier to collect it from you when you are ready. Joining Keys

Cast Iron; 2, 3, 4 & 6 column, Footed Ends as standard CE/UKCA approved & certified to BS EN442.

Standard Colours include 188 RAL & 4 exclusive Aston finishes.

High lustre Polished finish available. Please call 01342 302250 for colour samples.

Little Greene® & Farrow & Ball® Paints available (please add 15% to the 'Standard Colours' price)

Standard Colours: Up to 6 weeks. Polished: Up to 8 weeks. Please add 10 working days for orders of more than 10 radiators

Aston Sectional options with Footed End sections as standard

Build your radiator to fit your requirements using individual sections shown below, visit page 184 to help you size your radiator.

Please note section prices are based on 6 sections or more, for anything less than 6 sections prices will be on application. If you require more than 40 sections please contact our Customer Services team on 01342 302250 4

New & Exclusive Aston Finishes

Little Greene® & Farrow & Ball® Paints

To calculate your Little Greene® or Farrow & Ball® prices,

Column

Cast Iron; 4 or 6 column footed ends as standard, optional cast feet CE/UKCA approved & certified to BS EN442.

Supplied in RAL 7022 Umbra Grey primer, ready to be painted in your desired finish. 188 RAL colours, 10 Classic Cast Iron Colours, Industrial or Burnished Finishes. Please call 01342 302250 for samples of finishes. Little Greene® & Farrow & Ball® Paints available (please add 15% to the 'Colours' price)

Primer, RAL, Classic Cast Iron Colours, Farrow & Ball® & Little Greene®: Up to 3 weeks

Industrial & Burnished Finishes: Up to 6 weeks.

Available with Footed End sections as standard, Cast Feet are also available. Please see alternative mounting options on page 189 or call customer services on 01342 302250 for more information and prices.

Build your radiator to fit your requirements using individual sections shown below, visit page 184 to help you size your radiator. Please note section prices are based on 6 sections or more, for anything less than 6 sections prices will be on application. If you require more than 40 sections please contact our Customer Services team on 01342 302250

Please

Please specify your finish at time of order, delivered in up to 3 weeks

- Burnished and Industrial Finishes

Please specify your finish at time of order, delivered in up to 6 weeks

Little Greene® & Farrow & Ball® Paints

To calculate your Little Greene® or Farrow & Ball® prices, please add 15% to the Colours prices listed.

Please specify your

Please note for sections without Footed Ends deduct 60mm from the height of the section.

Colours & Finishes for the Clifton, Ledbury, Henley & Wentworth ranges

Classic Cast Iron Colours

We have a range of classic cast iron colours on a selection of our cast iron models, these specially selected colours reflect the heritage and traditions of cast iron from Victorian times to the modern day.

Chosen with an eye on classic interiors these tough hard wearing & washable finishes add a stunning metallic look to your cast iron radiators. Our selection of darker colours such as Iron Ore, Lead Grey and Factory Black are amongst the most popular choices along with the deep dark bronze of Vintage Coin and Classic Bronze. The range of Gold’s & Copper are perfect for a more rich and bold statement. The finish of the durable polyurethane, wet paint is equivalent to an Eggshell that sits well on the rough texture of cast Iron. For samples please call 01342 302250.

188 RAL Colours

Our Cast Iron designs are available in a large selection of RAL colours, 188 internationally recognised paint colours. Colour can add an extra element of individual style and design, creating a personal and unique result, you can select from a wide range of colours. For a RAL chart please call 01342 302250.

Burnished & Industrial Finishes

A selection of our cast iron ranges are available in a beautiful, burnished finish. Created by hand in the UK, this process involves multiple stages; first a complete coat of black paint is applied to protect hidden, hard to access areas of the radiator and to provide a highlight for the visible polished areas. Then we polish the front, sides & tops of the sections, whilst the rear & more difficult to access areas between the sections (circa 2/3rds to 3/4s of the back, and the bottom ) will remain black. Finally, a clear lacquer is applied to protect and maintain this exquisite finish.

We are able to offer our Ledbury, Clifton, Henley and Wentworth in any one of Farrow & Ball's® or Little Greene's® stunning range of quality paints, a perfect match for any heritage property. They add a classic high quality finish to your radiator that will perfectly match your chosen colour. We only use genuine Farrow & Ball® or Little Greene® paints, for Farrow & Ball® we use their Estate Eggshell (20% sheen), and for Little Greene®, we use their Tom's Oil Eggshell (15% gloss).

To calculate your Little Greene® or Farrow & Ball® prices, please add 15% to the Colours prices listed for the Ledbury, Clifton, Henley and Wentworth ranges. Please do note that (especially with Little Greene®) the reference number is extremely important. Little Greene’s palette of 196 colours includes the ‘Colour Scales’ which offer graduated shades from the same family of pigments. Therefore, similar names have been given, with a colour number for each. For further information please call us on 01342 302250.

Clifton shown on pages 80-81

Supplied in a black primer, ready to be painted in your desired finish. 188 RAL colours, 10 Classic Cast Iron Colours, Industrial or Burnished Finishes. Please call 01342 302250 for samples of finishes. Little Greene® & Farrow & Ball® Paints available (please add 15% to the 'Colours' price)

Primer, RAL, Classic Cast Iron Colours, Farrow & Ball® & Little Greene®: Up to 3 weeks Industrial & Burnished Finishes: Up to 6 weeks.

Available with Footed End sections as standard, Cast Feet are also available. Please see alternative mounting options on page 189 or call customer services on 01342 302250 for more information and prices.

Build your radiator to fit your requirements using individual sections shown below, visit page 184 to help you size your radiator. Please note section prices are based on 6 sections or more, for anything less than 6 sections prices will be on application. If you require more than 40 sections please contact our Customer Services team on 01342 302250

Primer, RAL Colours and Classic Cast Iron Colours

Please specify your finish at time of

Little Greene® & Farrow & Ball® Paints

To calculate your Little Greene® or Farrow & Ball® prices, please add 15% to the Colours prices listed in the table above.

Please specify your finish at time of order,

Cast Iron; Footed Ends as standard, optional Cast Feet CE/UKCA approved & certified to BS EN442. *Saving based on the value of

Pipe centres left to right Pipe centres from wall

64.8 x number of sections + 34mm bushes + valves

As a free standing radiator, pipe centres depend on final position.

Please note for sections without Footed Ends deduct 65mm from the height of the section. Any quoted lengths are provided for guidance only. Due to the nature, and production process of these radiators, tolerances are to be expected and we strongly advise to always have the actual product on-site prior to any pipe-work being installed.

Optional Cast Feet for Ledbury, Clifton, Henley & Wentworth Radiators

If you require optional Cast Feet please specify at time of order by adding the relevant kit & price below. Choose below from an open or closed desig n.

Wall Ties are included in the price and supplied as standard for all orders. Please specify your chosen mounting option at time of order.

Open Cast Foot

Please specify finish at time of order

Closed Cast Foot

Please specify finish at time of order

If you require additional Cast Feet or Wall Ties please see

Little Greene® & Farrow & Ball® Paints

To calculate your Little Greene® or Farrow & Ball® prices, please add 15% to the Colours prices listed in the tables shown left.

Please remember to add 100mm to the height of the Ledbury, Clifton, Henley & Wentworth section you have chosen if you are using Cast Feet.

Individual

Please remember to add 100mm to the height of the Ledbury, Clifton, Henley & Wentworth section you have chosen if you are using Cast Feet.

Please specify the finish of the radiator at the time of placing an order so the matching wall tie can be provided.

Solid Brass Luxury Wall Ties for Ledbury, Clifton, Henley & Wentworth

These solid brass wall ties provide a stylish finishing touch to any cast iron radiator; select to match your valves. Please note that these Wall Ties are an optional extra and do not come as standard with your cast iron radiator.

Please specify your chosen finish at time of order

Solid Brass Cast Iron Wall Ties & Airvents for Aston & Linton

These solid brass wall ties provide a stylish finishing touch to any cast iron radiator; select to match your valves. Available as a kit including matching airvent in Antique Brass, Chrome and Brushed Nickel. Please note that these Wall Ties and airvents are an optional extra and do not come as standard with your cast iron radiator.

Linton shown on pages 82-83

Cast Iron; 2 or 3 column Footed Ends only

CE/UKCA approved & certified to BS EN442.

188 RAL colours, 4 special finishes, Polished & Burnished finishes

1 Galvanised finish (details below).

Please call 01342 302250 for a RAL chart.

Made to order: RAL colours, Soft Gold, Slate Grey, Flat Black up to 5 weeks. Antique Brass, Polished, Burnished & Galvanised Copper up to 7 weeks.

Please add 10 working days for orders of more than 10 radiators.

RAL & Special Finishes (Soft Gold, Slate Grey, Flat Black)

Please specify your finish at time of order, delivery time is 5 weeks

Burnished & Polished Finishes

Column 3 Column

Please specify your finish at time of order, delivery time is 7 weeks for Burnished and Polished finishes

Please specify your finish at time of order, delivery time is 7 weeks for Antique Brass and Galvanised Copper.

Antique Brass Finish

Cast iron is a classic favourite, loved for its traditional qualities and style. Part of the charm of cast iron is the inherent imperfections and idiosyncrasies in the metal produced by the traditional production methods. Newly cast product retains the texture and individuality of radiators cast over 100 years ago, but in order to create an aged appearance to the finish, they go through a number of stages ending with a hand-finished application. The appeal of an antique product is its unique patina developed over time, each radiator will differ, and so to reproduce that effect our Antique finishes will have a varying depth of light and dark across the radiator.

After cleaning, priming and the application of the brass effect powder coat each radiator has an antique rub applied by hand. This is then rubbed down and baked to fix the protective surface. The level and amount of light and dark differ from section to section as the combination of texture, casting marks and the random nature of hand finishing produces a striking and unique antiqued finish.

Casting marks and textures retain the antique topcoat, highlighting the natural surface texture of the cast metal

Darker areas occur when hard to access areas and mould patterns retain more of the antique rub, creating an individual final finish.

Henley shown on pages 84-85

Cast Iron; 3 column, Footed Ends as standard, optional Cast Feet CE/UKCA approved & certified to BS EN442.

Supplied in a black primer, ready to be painted in your desired finish 188 RAL colours, 10 Classic Cast Iron Colours, Industrial or Burnished Finishes. Please call 01342 302250 for samples of finishes. Little Greene® & Farrow & Ball® Paints available (please add 15% to the 'Colours' price)

Primer, RAL, Classic Cast Iron Colours, Farrow & Ball® & Little Greene®: Up to 3 weeks Industrial & Burnished Finishes: Up to 6 weeks

Available with Footed End sections as standard, Cast Feet are also available. Please see alternative mounting options on page 189 or call customer services on 01342 302250 for more information and prices.

Build your radiator to fit your requirements using individual sections shown below, visit page 184 to help you size your radiator. Please note section prices are based on 6 sections or more, for anything less than 6 sections prices will be on application. If you require more than 40 sections please contact our Customer Services team on 01342 302250

RAL

Colours and Classic Cast Iron Colours

Please

Little Greene® & Farrow & Ball® Paints

To calculate your Little Greene® or Farrow & Ball® prices, please add 15% to the Colours prices listed in the table above.

& 765mm

Please

*Saving based on the value of individual items when bought separately. Order any of our selected valves & matching pipe covers at the same

Wentworth shown on pages 86-87

Cast Iron; 2 column, Footed Ends as standard, optional Cast Feet CE/UKCA approved & certified to BS EN442.

Supplied in a black primer, ready to be painted in your desired finish 188 RAL colours, 10 Classic Cast Iron Colours, Industrial or Burnished Finishes. Please call 01342 302250 for samples of finishes. Little Greene® & Farrow & Ball® Paints available (please add 15% to the 'Colours' price)

Primer, RAL, Classic Cast Iron Colours, Farrow & Ball® & Little Greene®: Up to 3 weeks Industrial & Burnished Finishes: Up to 6 weeks.

Build your radiator to fit your requirements using individual sections shown below, visit page 184 to help you size your radiator. Please note section prices are based on 6 sections or more, for anything less than 6 sections prices will be on application. If you require more than 40 sections please contact our Customer Services team on 01342 302250

Primer, RAL Colours and Classic Cast Iron Colours

Please specify your finish at time of order, delivered in up to 3 weeks

Little Greene® & Farrow & Ball® Paints

To calculate your Little Greene® or Farrow & Ball® prices, please add 15% to the Colours prices listed in the table above.

Burnished and Industrial Finishes

centres left to right Footed End section depth Pipe centres from wall

71 x number of sections + 34mm bushes + valves 145mm (footed ends protrude 10mm total from section depth ) As a free standing radiator, pipe centres depend on final position.

Please note for sections without Footed Ends deduct 70mm from the height of the section.

Any quoted lengths are provided for guidance only. Due to the

and production process of these radiators, tolerances are to be expected and we strongly advise to always have the actual product on-site prior to any pipe-work being installed.

*Saving based on the value of individual items when bought separately. Order any of our selected valves & matching pipe covers at the same time as your radiator.

High quality Italian design & manufacture Aluminium; horizontal towel rail 10 year guarantee, CE/UKCA approved & certified to BS EN442.

Pearl White & Chrome

Made to Order: Up to 5 weeks

High quality Italian design & manufacture Aluminium; vertical ladder rail. Hydronic & Electric models 10 year guarantee, CE/UKCA approved & certified to BS EN442.

Made to Order: Up to 5 weeks: Hydronic models Up to 6 weeks: Electric models Pearl White

High quality design and manufacture

Steel: Slimline towel rail with painted or brushed stainless steel towel bars CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 23 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes, call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes in up to 2 weeks. Made to Order RALs & Special Finishes: Up to 2 weeks.

Pipe centres left to right Pipe centres from wall Depth from wall

Single 50mm 30mm-58mm 117mm-145mm

Double 50mm 54mm-77mm 141mm-164mm

23 RAL colours are shown on page 216

Double with Matching Towel Bars (Towel Bars will be painted to match the same colour as the radiator) Double with Brushed Stainless Steel Towel Bars

Please call us on 01342 302250 if you would like a price for the Accorto without towel bars.

RAL colours are shown on page 216

High quality design and manufacture

Steel; slimline towel rail with a distinctive dimpled design and supplied with either matching or brushed steel towel bars. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 23 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes, call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes, RALs & Special Finishes: Up to 2 weeks.

Enhance your bathroom or kitchen with a choice of 23 RAL colours. Choose a contrasting finish to create a bold focal point, or opt for a complementary shade for a refined, seamless look that allows your Cuscino towel rail to blend effortlessly with the surrounding wall. Refer to page 216 to view the complete range of 23 RAL colours.

High quality design and manufacture

Steel: Slimline towel rail with painted or brushed stainless steel towel bars CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 23 RAL colours & 31 Special Finishes.

Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes, call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours.

Feature Finishes, RALs & Special Finishes: Up to 2 weeks.

Ellipsis Classic shown on page 96

High quality Italian design & manufacture. Steel; 50mm x 25mm elliptical tube in tube towel rail. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes, call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order RALs & Special Finishes: Up to 5 weeks.

Please add 10% to the RAL/Special Finish price to work out your Feature Finish

*Saving based on the value of individual items when bought separately. Order any of our selected valves & matching pipe covers at the same time as your

Ellipsis Towel Rail shown on page 98

High quality Italian design & manufacture Steel; 50mm x 25mm elliptical tube on tube towel rail. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), please call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

High quality Italian design & manufacture.

Steel 50mm x 25mm elliptical tube side loading towel rail. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes, call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order RALs & Special Finishes: Up to 5 weeks.

*Saving based on the value of individual items when bought separately. Order any of our selected valves & matching pipe covers at the same time as your radiator; PROMOV3W (white), PROMOV3C (chrome).

Ellipsis 30mm Towel Rail shown on page 99

High quality Italian design & manufacture Steel; 30mm x 15mm elliptical tube on tube towel rail. CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), please call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

High quality design and manufacture

Steel: Slimline towel rail with decorative holes and towel bars CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 23 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes, call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes, RALs & Special Finishes: Up to 2 weeks.

Matching Towel Bars (Towel Bars will be painted to match the same

All widths listed in the pricing tables above include the towel bars. Towel bars can be positioned at any height.

Note: Optional accessories for the Foro can be found on page 195.

Please call us on 01342 302250 if you would like a price for the Ertza without towel bars.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

High quality Italian design & manufacture. Steel: 23mm cross tubes, ladder style towel rail in single or double CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), call 01342 302250 for samples. Stock White RAL 9016: 48-72 Hours. Feature Finishes in up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5

Single - Stock options White RAL 9016

Sitar Lato shown on

High quality Italian design & manufacture.

Steel: 23mm cross tubes, CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes.

Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes in up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Piano Lato shown on page 103

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes.

Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes, call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Please add 10% to the RAL/Special Finish price to work out your Feature Finish price

Piano Towel Rail shown on

High quality Italian design & manufacture Steel; 50mm x 10mm flat tubes with 30mm collectors in single & double CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes (stock sizes only), call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

606

Pipe centres left to right Pipe centres from wall Depth from wall width - 50mm 55mm 78mm

Poppy Towel Rail Hydronic page 104

High quality Italian design & manufacture

Steel; 25mm curved cross tubes with 40mm 'D' shaped collectors CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 23 RAL colours, 31 Special Finishes & Chrome.

Please call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes & 3 Tinted Lacquers, call 01342 302250 for samples

Stock White RAL 9016 & Chrome: 48-72 Hours

Made to Order RAL, Special & Feature Finishes, Tinted Lacquers: Up to 2 weeks

Poppy Towel Rail Electric page 105

High quality Italian design & manufacture. EcoDesign / Lot 20 Compliant

Steel: electric towel rail with 25mm curved cross tubes 10 year guarantee on towel rail. 2 year guarantee on element.

White RAL 9016 as standard, 188 RAL Colours, 31 Special Finishes & Chrome

Please call 01342 302250 for a RAL or Special Finish.

Stocked White & Stocked Chrome 48-72 Hours

Made to Order: Up to 6 weeks for White, Chrome: Up to 8 weeks.

The Poppy has curved cross tubes which add an extra visual dimension to this classic style. Supplied with a SMART Controller as standard, these Wi-Fi connected options offer full control via an app, and are Ecodesign compliant for efficient operat i on.

• Voltage-feed 230V 50Hz, 1ph.

IEC Class Protection - Class II. IP Rating - IP44

• Electrical cable length 1200mm

IRSAP NOW Smart Controller supplied colour matched on white & coloured towel rails, chrome models supplied with a matt black controller.

• Wi-Fi electronic control

• IRSAP NOW App used to control & customise heating from your phone

A quick start guide and tutorials are all available on the app.

Note: White towel rails are supplied with White brackets. Chrome/ Painted towel rails are supplied with Chrome brackets.

Stock options White RAL 9016

Stock options Chrome

Made to order options - White & Colours electric

Depths from wall

398mm wide = 95mm-105mm

498mm wide = 100mm-110mm

598mm wide = 105mm-115mm

Made to order options - Chrome electric

Curved profile

The operation of any SMART electric towel rail depends on the success of the pairing via the App (connection is needed via a Wi-Fi network). Scan the QR code (left) for more information.

Lupin Towel Rail Hydronic page 106

High quality Italian design & manufacture

Steel; 25mm straight cross tubes with 40mm 'D' shaped collectors CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 23 RAL colours, 31 Special Finishes & Chrome. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes & 3 Tinted Lacquers , call 01342 302250 for samples

Stock White RAL 9016 & Chrome: 48-72 Hours Made to Order RAL, Special & Feature Finishes, Tinted Lacquers: Up to 2 weeks

Enhance your bathroom or kitchen with a choice of 23 RAL

look that allows your Poppy

Tinted Lacquer Finishes

Chrome towel rails with tinted lacquer applied. See pages 106 to 107 for more images or call customer services on 01342 302250 for sample swatches.

Lupin Towel Rail Electric page 107

High quality Italian design & manufacture. EcoDesign / Lot 20 Compliant

Steel: electric towel rail with 25mm curved cross tubes 10 year guarantee on towel rail. 2 year guarantee on element.

White RAL 9016 as standard, 188 RAL Colours, 31 Special Finishes & Chrome

Please call 01342 302250 for a RAL or Special Finish.

Stocked White & Stocked Chrome 48-72 Hours

Made to Order: Up to 6 weeks for White, Chrome: Up to 8 weeks.

A simple aesthetic that has stood the test of time. The Lupin Electric will add practical value to any bathroom, kitchen or utility area. Its straight tube profile and generous hanging space have proven popular for many years. Supplied with a SMART Control as standard, these Wi-Fi connected options offer full control via an app, and are Ecodesign compliant for efficient operation.

Voltage-feed 230V 50Hz, 1ph.

• IEC Class Protection - Class II. IP Rating - IP44

Electrical cable length 1200mm

• IRSAP NOW Smart Controller supplied colour matched on white & coloured towel rails, chrome models supplied with a matt black controller.

Wi-Fi electronic control

IRSAP NOW App used to control & customise heating from your phone

• A quick start guide and tutorials are all available on the app.

Made to order options - White & Colours electric

The operation of any SMART electric towel rail depends on the success of the pairing via the App (connection is needed via a Wi-Fi network). Scan the QR code (left) for more information.

Steel; 30mm square collectors, 22mm round cross tubes CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 23 RAL colours & 31 Special Finishes. Call 01342 302250 for a RAL or Special Finish chart. 6 Feature Finishes please call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Special & Feature Finishes: Up to 2 weeks

Pipe centres left to right Pipe centres from wall width - 30mm 57mm to 65mm

Stock options White RAL 9016

Quadre shown on page 108

High quality Italian design & manufacture Steel; 25mm x 20mm rectangular tubes with 30mm square collectors CE/UKCA approved & certified to BS EN442.

White RAL 9016 as standard, 188 RAL colours & 31 Special Finishes. Please call 01342 302250 for a RAL or Special Finish chart.

6 Feature Finishes (stock sizes only), see page 7 or call 01342 302250 for samples.

Stock White RAL 9016: 48-72 Hours. Feature Finishes: Up to 2 weeks. Made to Order White, RALs & Special Finishes: Up to 5 weeks.

Iris shown on pages 110-111

Stainless Steel; 22mm cross tubes

Suitable for a direct system, Hydronic & Electric Models CE/UKCA approved & certified to BS EN442.

Polished Stainless Steel.

Linton Towel Rail shown on

Steel tubes with a cast iron radiator CE/UKCA approved & certified to BS EN442.

Steel tubes available in Chrome, 3 Special Finishes or a choice of 188 RAL Colours Cast iron sections available in 188 RAL Colours, 3 Special Finishes, Antique Brass, Polished, Burnished & Galvanised Copper. Please specify your finish of the cast iron sections and the steel tube frame at time of order. Call 01342 302250 for a RAL chart.

Made to Order: Up to 8 weeks. Please specify the finish of the cast iron sections and finish of the steel tube frame at time of order.

We are now able to offer the Linton Towel Rail in more colours and finishes. Choose to have the steel tubes in a choice of 188 RAL Colours, 3 Special Finishes or Chrome. The cast iron sections are available in the below pictured finishes as well as the full 188 RAL Colours.

How to order your Linton Towel Rail

1. Choose your size from the pricing table shown below

2. Choose your cast iron sections finish from either the finishes shown above ( Soft Gold, Slate Grey, Flat Black, Burnished, Polished, Antique Brass, Galvanised Copper) or one of 188 RAL Colours

3. Choose your steel frame colour from a choice of 188 RAL Colours, Soft Gold, Slate Grey, Flat Black and Chrome.

4. Place your order with the chosen model code, the cast iron section finish & the steel frame finish. For example if ordering as per the picture shown right;

LINTR124903 Antique Brass cast iron sections with a RAL 9001 Cream steel frame.

Please remember to specify both cast iron & steel frame finishes at time of order

Chalfont Floor Standing shown on page 112

Chrome with White Steel Radiator (main image)

Antique Bronze with Ivory Steel Radiator (shown below)

Antique Copper with Ivory Steel Radiator (shown below) Bright Nickel with White Steel Radiator (shown below). Brass tubes with a steel sectional radiator CE/UKCA approved & certified to BS EN442.

Stock Chrome: 48-72 Hours.

Made to Order: Up to 10 weeks Bright Nickel & Chrome Electric, Antique Bronze and Antique Copper.

Chalfont Wall Hung shown on page 112

Brass tubed wall hung design, suitable for a direct system

CE/UKCA approved & certified to BS EN442.

Chrome (main image)

Antique Bronze, Antique Copper & Bright Nickel (shown below).

Stock Chrome: 48-72 Hours.

Made to Order: Up to 10 weeks Bright Nickel & Electric, Antique Bronze and Antique Copper.

Supplied with standard element and powered from a switched fused spur.

Helpful Advice

Made to Order

We pride ourselves on having the widest range of sizes, options, colours, and accessories so that you have literally thousands of options to choose from. This means that you can have almost any radiator made to order so that it perfectly suits the space you have available, your interior design and also match your heat requirements.

Colour Options

Many of our designs are available in a large selection of RAL colours (188 internationally recognised paint colours) and Special Finishes. Please be aware that certain RAL colours may take longer to produce than listed in this brochure, if this is the case, we will make you aware of the revised delivery date and any alternative options. If you would like a copy of our RAL or Special Finish chart please contact us on 01342 302250. Please note that due to the printing process and manufacturing tolerances, the colour (including white) of a finished radiator may vary slightly from the colours represented in the brochure and from one colour group to another, as well as from our Special Finish & RAL charts. It should also be noted that if the same type of radiators are ordered and produced, they may also differ in finished colour from any previously ordered.

Stock

To provide the best possible service, we hold the most popular sizes of white and chrome models in stock. So if you need quick delivery, look in the technical section for models listed with bold prices; these can usually be delivered within 48-72 hours.

How much heat?

We always recommend you choose radiators with a higher output than required, as you can always turn them down & have the reassurance of additional heat in really cold spells.

How is heat output measured?

There are two recognised measurements for heat output; BTU’s (British Thermal Unit) and Watts. Within this brochure you will find both listed in the technical section by each radiator.

Delta T’s

The heat output of a radiator is established using a calculation called a delta T (Δ T), based on the desired room temperature of 20˚C and boiler flow and return temperatures; European standards use delta T50˚C as a measurement, this is based on a boiler flow temperature of 80˚C and a return of 60˚C (80˚C + 60˚C ÷ 2 - 20˚C=50˚C). Some systems using renewable energy sources may have different flow and returns and therefore different delta T’s (e.g 60˚C/40˚C= delta T30˚C). If you require outputs based on alternative delta’s please contact us on 01342 302250.

BS EN442

Our radiators are manufactured and tested in accordance with BS EN442. This standard uses ΔT50 to provide a consistent and comparable method of measuring heat output. Some installers may still reference the older ΔT60 rating. Where conversion is required, the following correction factors should be used:

ΔT50 to ΔT60: multiply by 1.267

ΔT60 to ΔT50: multiply by 0.781 For low-temperature and heat pump installations, radiator outputs can be converted using the following correction factors:

ΔT50 to ΔT30: multiply by 0.51

ΔT30 to ΔT50: multiply by 1.96

How can I find out what heat outputs I need?

Your installer should be able to confirm the exact requirements for each of your rooms, but you can also visit our website (theradiatorcompany.co.uk) and use our online heat calculator or use the following simple calculation as a guide;

1. Find the volume of your room in cubic feet = height x width x length (To convert cubic metres into cubic feet multiply the total figure by 35.31).

2 Multiply the volume by 6 to find the BTU requirement. If you need to know the Watts equivalent, divide your BTU by 3.412.

For example:

A bathroom 6’x8’ with 8’ ceilings = a volume of 384 cubic feet multiply by 6 = 2304 Btu’s

You may need more than 1 radiator in order to ensure an even distribution of heat in a large room, if so divide the required output by the total number of radiators you could sensibly place in the room.

e.g. a lounge 14’ x 18’ x 8’ ceilings = 12096 Btu’s.

Two radiators would require an output of = 6048 BTU’s each, 3 radiators = 4032 BTU’s each

Do different designs affect output?

By altering the size, shape or number of tubes or columns in a radiator you can adjust the output achieved, as this adds or subtracts surface area, the main contributor to heat output. For example, the multiple columns of our Ancona ® range provide huge flexibility in achieving the right output in a limited space.

Single or double radiators

Using models with additional rows of tubes or multiple columns maximises heat output within the same wall space.

Our Water Lily design comes in single or double versions, as an example of comparative heat outputs:

Water Lily single 2020mm x 312mm = 2238 BTU’s

Water Lily double 2020mm x 312mm = 3180 BTU’s

Horizontal or Vertical;

Many of our designs are available in horizontal or vertical options which means you can maximise the use of ceiling heights and long low spaces, without losing output

How to order

Order your radiator in seven easy steps

1. Confirm your heat output requirements for the room where you need the radiator or towel rail; this ensures the radiators you choose will deliver the heat output you need. Use the BTU (heat output calculator) on our website theradiatorcompany.co.uk then decide how many radiators you need for the relevant room; discuss this and positions with your installer if needed.

2. Choose your design; our range has everything from traditional cast iron to modern feature radiators, even an environmentally friendly aluminium range, with an extensive choice of sizes, colours & outputs.

3. Select a size that matches the heat output requirement; outputs are shown in our technical section & will help you & your installer to find the best match for your needs.

4. Choose the colour you want; with over 200 colours & special finishes you are able to match your colour scheme or introduce an accent colour to create a striking feature.

5. Find a valve to complete the look; Choose from our wide selection of valves and add any accessories that complement your choice.

6. Order from your nearest showroom or merchant to find your nearest branch call us on 01342 302250 or visit theradiatorcompany.co.uk

7. Order online from our website theradiatorcompany.co.uk

For help in choosing a sectional radiator (modular radiators that can be built by section to achieve a size and/or output requirement), please visit our website to use one of our online radiator builders for Ancona® Steel Multi Column, Cast Iron and Sectional Aluminium.

Our Product Range

All our radiators are produced and outputs measured in accordance with BS EN442 and as such are CE/UKCA approved.

Radiators are supplied with BOE connections as standard unless otherwise stated. B2 underneath connections can be supplied with selected models. Full technical details can be found from pages 124 to 213 and all details are in accordance with our factory or manufacturing partner’s terms of reference at the time of going to print.

• Due to the excessively corrosive nature of chlorine, we do not recommend that radiators & towel rails are placed in swimming pool environments. In addition, radiators should not be located in areas that have long term exposure to high levels of moisture without suitable ventilation.

When commissioning any radiator (including aluminium) on an indirect/closed system, we recommend using a suitable mixed metal inhibitor in suitable quantities to protect against scale & corrosion. We can provide the water content of our radiators if required to help the installer calculate this if needed.

Electric / Dual Fuel

Selected towel rails can be converted to work as dual fuel models. An element and T-piece are needed to adapt the towel rail; your installer will need to be aware if you wish to do this in order to adjust pipe centres accordingly. If a towel rail is suitable for dual fuel, it will be noted on the product technical page.

Pipe Centres

We endeavour to ensure all pipe centres are correct, however manufacturing tolerances must be considered. Therefore we strongly recommend that pipe work is not altered or adjusted until your new radiator or towel rail is delivered. The Radiator Company will not accept any responsibility for claims resulting from incorrect pipe centres.

Delta T’s

The heat output of a radiator is established using a calculation called a delta T (Δ T), based on a desired room temperature of 20˚C and boiler flow & return temperatures; European standards use delta T50˚C as a measurement, this is based on a boiler flow temperature of 80˚C and a return of 60˚C (80˚C + 60˚C ÷ 2 - 20˚C=50˚C). Some systems using renewable energy sources may have different flow and returns and therefore different delta T’s (e.g 60˚C/40˚C = delta T30˚c). If you require outputs based on alternative delta’s please contact us on 01342 302250.

Delivery

Please note that many of our factories close for 2–4 weeks during the holiday periods of July/August and December. This may extend the delivery period quoted for non stock made to order items ordered during July/August & December/January. We will confirm the expected delivery date on our order acknowledgement at the time of order. Unfortunately, delivery to Scotland / Offshore Islands may take longer due to the distances involved. Deliveries will be made to the nearest hard standing area.

Systems

All radiators and towel rails featured in this brochure are suitable for indirect/closed systems that comply with ‘BS5449, section 1 forced circulation hot water systems’. Systems running with low pressures (under 1 Bar), microbore pipework or modern boilers with modulating pumps, may experience flow and heating issues if not accounted for in the system design which could result in radiators not heating fully or noisy pipework. Adequate provision must be made for expansion and flow rate when using long or tall radiators or Aluminium radiators. Direct heating systems use your hot water supply to heat a radiator; usually this will occur in a bathroom. If you have any radiators or towel rails linked to a direct system they should be made from either stainless steel or brass to avoid rusting and contaminating the hot water supply. However it should be noted that these radiators are not suitable for Direct systems fitted with a water softener.

Finishes and Painted Cast Iron

It should be noted that due to the production process colours can vary by +/- 5 to 10% from samples provided and between radiators ordered in the same colour at different times.

All painted cast iron radiators will be checked and tested prior to despatch. Care must be taken when handling and joining painted cast iron radiators on-site to avoid damaging the finish. Cast iron radiators will be supplied with a small bottle of touch up paint in case of damage to the finish during installation, however, it should be noted that this may vary slightly from the original finish. As a result of the casting process, cast iron radiators have a rough surface finish with small imperfections which will show after the painting process.

Terms & Conditions

For a copy of The Radiator Company full Terms & Conditions please call our Customer Services department on 01342 302250 or visit theradiatorcompany.co.uk

23 RAL Colour Options

Available across the Ancona® Console Table, Ancona® Bench Seat Vertical, Sectional Aluminium, Torré, Canto, Accorto, Cuscino, Ertza, Foro, Poppy & Lupin ranges.

RAL 9010 – Pure White is supplied as standard for: Sectional Aluminium (Vip, Oscar, Mix & Vox) and the Canto range. Available as an optional finish across all other ranges listed above.

Please Note:

Due to printing processes and manufacturing tolerances, the colour of finished radiators may vary slightly from those colours shown on this page.

Please call 01342 302250 for a RAL chart.

Colour Coordination

We understand that many interior designs can be enhanced with carefully applied colour coordination or contrasts to create a standout feature. Today we have a huge choice of brands and exciting colour palettes and tones to choose from for our walls and woodwork, providing the opportunity to create truly stunning rooms. If you are looking to create a uniquely personal look using colours from either popular or premium paint brands, we can take your chosen colour and create a highly durable powder coat finish that will allow your radiator to blend in with your wall colour, or stand out if you want to make a statement!

Making sure that you get something that reflects the effort you have taken in choosing your colours is important. Once we know the radiators you are interested in and the make, name and code of your chosen colour, we can supply a quote and an estimate of delivery times. Please note that sometimes we will require a physical sample to colour match from.

The first step is to order a colour sample, for which a small charge of £120 Inc VAT will apply (this will be deducted from the full order when placed). We will then mix a batch of powder and prepare a sample for you to check and approve. Once you are happy, you can proceed to order your radiators.

To achieve your desired colour and allow for the sample and final production, we have an extension on our standard delivery times to allow for the process, this could be up to 6 weeks for the sample, and once the sample has been approved, up to 8 weeks for the completion of your radiator order. Timescales will be determined by the size and quantity of radiators you require, we will be able to provide a more accurate estimation when we quote for your project.

The colour coordination icon indicates which products are available for this service and are shown on the relevant technical pages. Please call us on 01342 302250 or visit theradiatorcompany.co.uk for more information.

® Registered trademark of Farrow & Ball Holdings Limited

A Pages

Accorto 92, 195

Aluminium Accessories 175

Aluminium, Sectional 66-73, 176-183

Ancona® 8-31, 124-145

Ancona® Bare Metal Lacquer 16-17, 132-133

Ancona® Console Table 26-27, 140-141

Ancona® Bench seat 28, 142-143

Ancona® Curved 29, 144

Ancona® Electric 30-31, 145

Ancona® Made To order 18-25, 134-139

Ancona® Stock 8-17, 124-133

Ancona® Feature Finishes 14-15, 126-131

Aston 78-79, 185

BDO Sitar 100, 200

BDO Step 90, 194

Black & Brass TRV 120

C

Canto 48, 155

Cast Iron Radiators 74-87, 184-193

Chalfont 113, 212-213

Chalfont Electric 113, 212-213

Clifton 80-81, 188

Colour coordination 217

Crosshead Valve 120

Cuscino 93, 196

Cylinder Valve 121 D

Designer Radiators

32-63, 146-173

Duo 50 121

Ellipsis 56-57, 164-167

Ellipsis 30mm 54-55, 162-163

Ellipsis Classic 98, 198

Ellipsis Lato 97, 199

Ellipsis Towel Rail 98, 199

Ellipsis 30mm Towel Rail 199, 199

End panels (Vip, Oscar) 175-179

Ertza 94, 197

Feature Finishes 9, 14-15, 133

Foro 95, 200

Gravina 38-39, 151

157 Henley

192

210

186 Linton

190-191

Linton Towel Rail 113, 211

Lupin

206

Lupin Electric 106-107,, 207 M

Mezzola 44-45, 151

Mini Cube Valve 121

Mix 72-73, 182-183

Oglio 46-47, 154

Oscar 68-69, 178-179

Painted Valves 115

Piano 50-51, 158-159

Sitar Lato

Sitar Towel Rail

Sitar, BDO

Steel Multi Column

BDO

Standard wall brackets

Termal

Tinted Lacquers Ancona

Tinted Lacquers Poppy & Lupin

Torré

Towel Rail Section

Section

TRV

XL TRV

Lily

Wentworth

3 Style valve 121

156

150

204-207

152

194-213

180-181

Poppy Electric