Mounting
Operation
6. Prepare the pleated blind. Remove rubber band. Unroll cord (with tension cord bracket on top) and remove the tension cord brackets on the bottom from the adaptor.
8. Mount handles. Slide both handles sideways onto the adapter.
Installation – Operation – Care Model P1615 with adhesive profile
Tension cord bracket
Cord Upper tension cord bracket
The unit is operated by moving the profiles on the operating handle. Note: When the profile and the tension cord bracket engage, you will hear a click.
TOP!
Operating handle
Rubber band
Lower tension cord bracket
7. Mount the pleated blind. Slide the tension cord brackets onto the adapter. Tension cord bracket 2
Adapter
9. After having checked that the pleated blind functions as prescribed, the excess cord ends can be cut off. Attention: Adjustment of the cord tension must be uniform and may only be made by a professional.
1
Care
4 3
Thanks to a special manufacturing process, our fabric qualities are furnished with an antistatic finish and are therefore resistant to dust and dirt. Occasional brushing with a soft brush or a feather duster is usually sufficient. When cleaning glass and the window frame, make sure that no water or caustic cleaning agents come into contact with the pleated blind fabric. No guarantee can be offered for damage to fabrics that is attributable to condensate, cleaning agents or soiling by insects. For further care information, refer to the cleaning instructions. © 2017 Benthin® . Misprints, errors and changes excepted . Version 21-11-2017 . 97000287
Dear Customer, this dimensionally accurate pleated blind was produced especially according to your requirements. High qualilty materials and a design that is perfect in function and elegance guarantee a long service lifetime and thus ensure great pleasure in the purchased product. Your pleated blind Manufacturer Please read this intructions carefully before fitting the blind Blinds must be fitted by skilled personnel. Wrong installation may result in accidents. Alterations of the blind must be approved by the blind manufacturer.