Industrial Technology
Midterm Exam
Course Introduction
Industrial Technology is an interdisciplinary field that focuses on the application of engineering and technological principles to improve industrial processes, systems, and products. Students will explore topics such as manufacturing processes, quality assurance, materials science, automation, and project management. The course emphasizes practical skills in problem-solving, process optimization, and the use of modern technologies to enhance productivity and efficiency in industrial settings. Graduates are prepared for careers in manufacturing, production management, industrial design, and technology supervision, equipped with a strong understanding of both technical and organizational aspects of industry.
Recommended Textbook
Print Reading for Engineering and Manufacturing Technology 3rd Edition by David A Madsen
Available Study Resources on Quizplus
17 Chapters
1502 Verified Questions
1502 Flashcards
Source URL: https://quizplus.com/study-set/259
Page 2
Chapter 1: Introduction to Engineering and Manufacturing
Technology Print Reading
Available Study Resources on Quizplus for this Chatper
63 Verified Questions
63 Flashcards
Source URL: https://quizplus.com/quiz/4257
Sample Questions
Q1) American National Standards Institute
A)FSCM
B)DNC
C)CAM
D)ASME
E)CNC
F)SI
G)CAGE
H)ANSI
Answer: H
Q2) List the four classes of size tolerances identified by the International Organization for Standardization (ISO) standard ISO 2768, General Tolerances that generally controls unspecified tolerances for metric dimensions.
Answer: ISO 2768 tolerancing is based on the size of features. Small sizes have closer tolerances and larger sizes have larger tolerances. There are four classes of size tolerances including fine (f), medium (m), coarse (c), and very coarse (v).
Q3) Identify the ASME standard titled Metric Drawing Sheet Size and Format.
Answer: ASMEY14.1M
To view all questions and flashcards with answers, click on the resource link above. Page 3
Chapter 2: Communicating with a Sketch
Available Study Resources on Quizplus for this Chatper
84 Verified Questions
84 Flashcards
Source URL: https://quizplus.com/quiz/4258
Sample Questions
Q1) Two-dimensional views of an object that are established by a line of sight that is perpendicular (90°) to the surface of the object.
A)sketching
B)isometric line
C)Non-isometric line
D)mitre line
E)measurement line
F)proportion
G)multiview projection
H)orthographic projection
Answer: G
Q2) What is a trammel when related to sketching?
A) a circle with a 6" diameter
B) a ruler made of paper that establishes the circle radius
C) a compass for sketching circles
D) none of the above
Answer: B
Q3) Sketching is _____________________ drawing without the use of
Answer: freehand, drafting equipment
To view all questions and flashcards with answers, click on the resource link above. Page 4
Chapter 3: Scales and Precision Measurement
Available Study Resources on Quizplus for this Chatper
32 Verified Questions
32 Flashcards
Source URL: https://quizplus.com/quiz/4259
Sample Questions
Q1) Decimeter
A)cm
B)hm
C)dam
D)km
E)dm
F)mm
G)m Answer: E
Q2) The civil engineer's scales are calibrated in multiples of ten.
A)True
B)False
Answer: True
Q3) A scale establishes a proportion used in determining the dimensional relationship of an actual object to the representation of the same object on a drawing.
A)True
B)False
Answer: True
Q4) Give another name for the micrometer caliper.
Answer: A micrometer caliper is commonly called a micrometer.
To view all questions and flashcards with answers, click on the resource link above. Page 5
Chapter 4: Reading Lines and Lettering on a Print
Available Study Resources on Quizplus for this Chatper
45 Verified Questions
45 Flashcards
Source URL: https://quizplus.com/quiz/4260
Sample Questions
Q1) A hidden line represents an invisible edge on an object. Hidden lines are thin lines drawn .01 in. (0.3 mm) thick.
A)True
B)False
Q2) Lowercase letters are quite common in mechanical drafting.
A)True
B)False
Q3) What is the difference between cutting plane lines and viewing plane lines?
A) Cutting plane lines are only used where a portion of an object is completely cut away.
B) Viewing plane lines are thicker than cutting plane lines.
C) Cutting plane lines are thicker than viewing plane lines.
D) Viewing plane lines are used to identify where a section is taken.
E) none of the above
Q4) Extension lines are thin lines used to establish the extent of a dimension and begin with a .06 in. (1.5 mm) space from the object and extend to about .125 in. (3 mm) beyond the last dimension.
A)True
B)False
Q5) Visible lines are also called ____________________ lines.
To view all questions and flashcards with answers, click on the resource link above. Page 6
Chapter 5: Reading Multiviews
Available Study Resources on Quizplus for this Chatper
94 Verified Questions
94 Flashcards
Source URL: https://quizplus.com/quiz/4261
Sample Questions
Q1) Fillets are slightly rounded outside curves at corners.
A)True
B)False
Q2) When is a removed view used, how is the location of the removed view identified on the view from where the removed view is taken, how is the removed view oriented, and how is the removed view located and titled on the drawing?
Q3) In a third-angle projection, the height is shown in only three views.
A)True
B)False
Q4) How are the sheets of a multi sheet drawing numbered?
Q5) A short break line is always____.
A) used in a view enlargement
B) used in a first-angle projection
C) used in fold lines
D) used when designating a cylinder
E) none of the above
Q6) In an orthographic view, some planes can be foreshortened.
A)True
B)False
Q7) A ____________________ is a slightly angled corner on an object.
To view all questions and flashcards with answers, click on the resource link above. Page 7
Chapter 6: Reading Auxiliary Views
Available Study Resources on Quizplus for this Chatper
32 Verified Questions
32 Flashcards
Source URL: https://quizplus.com/quiz/4262
Sample Questions
Q1) Define secondary auxiliary view.
Q2) Briefly define auxiliary views.
Q3) Describe the use of an auxiliary view enlargement application.
Q4) Auxiliary views are used to show the true size and shape of a surface that is not parallel to any of the six principal views.
A)True B)False
Q5) What is it called when a surface feature is not perpendicular to the line of sight?
Q6) Describe the method called cross-reference zoning used to indicate the location of a view back to the viewing location on a previous page.
Q7) The viewing-plane line is labeled with numbers so the view can be clearly identified. This is especially important to observe when several viewing-plane lines are used to label different auxiliary views. A)True B)False
Q8) An auxiliary view allows you to look directly at the inclined surface. A)True B)False
To view all questions and flashcards with answers, click on the resource link above.
Chapter 7: Manufacturing Materials and Processes
Available Study Resources on Quizplus for this Chatper
188 Verified Questions
188 Flashcards
Source URL: https://quizplus.com/quiz/4263
Sample Questions
Q1) Brass is a widely used alloy of ____.
A) copper and zinc
B) copper and tin
C) phosphorous and bronze
D) copper and bronze
E) none of the above
Q2) Saw machines can be used as cutoff tools to establish the length of material for further machining.
A)True
B)False
Q3) ____ is a casting method using wax.
A) Investment casting
B) Die casting
C) Sand casting
D) Centrifugal casting
E) none of the above
Q4) What does R&D stand for?
Q5) Name a method of monitoring a process quantitatively and using statistical signals to either leave the process alone, or change the process.
Q6) Define stamping
To view all questions and flashcards with answers, click on the resource link above. Page 9
Chapter 8: Reading Dimensions
Available Study Resources on Quizplus for this Chatper
125 Verified Questions
125 Flashcards
Source URL: https://quizplus.com/quiz/4264
Sample Questions
Q1) A datum is considered a theoretically exact ____ from which dimensions for related features are established.
A) surface
B) center plane
C) point
D) axis
E) all of the above
Q2) This is the general term applied to describe a physical portion of a part or object, such as a surface, slot, tab, pin, keyseat, or hole.
A) feature
B) Feature of size
C) datum
D) none of the above
Q3) An ISO 9000 certification is obtained by passing an inspection by the company management team.
A)True
B)False
Q4) Define chamfer and provide comprehensive information about how chamfers are dimensioned.
To view all questions and flashcards with answers, click on the resource link above. Page 10
Chapter 9: Reading Prints With Fasteners and Springs
Available Study Resources on Quizplus for this Chatper
141 Verified Questions
141 Flashcards
Source URL: https://quizplus.com/quiz/4265
Sample Questions
Q1) Simplified representations clearly describe threads and are the most commonly used thread representations.
A)True
B)False
Q2) ____ threads are the most common threads used on threaded fasteners.
A) Acme threads
B) Buttress threads
C) Rolled threads
D) Unified threads
E) none of the above
Q3) Chamfers are commonly applied to the third thread to help start a thread in its mating part.
A)True
B)False
Q4) A rivet is a metal pin without a head used to fasten two or more materials together.
A)True
B)False
Q5) For what are machine screws used?
Q6) Define blind hole.
To view all questions and flashcards with answers, click on the resource link above. Page 11
Chapter 10: Reading Sections, Revolutions, and
Conventional Breaks
Available Study Resources on Quizplus for this Chatper
112 Verified Questions
112 Flashcards
Source URL: https://quizplus.com/quiz/4266
Sample Questions
Q1) Used typically for symmetrical objects; the cutting-plane line actually cuts through one quarter of the part. The sectional view shows half of the interior and half of the exterior at the same time.
A) Full section
B) Half section
C) Broken out section
D) Removed section
E) none of the above
Q2) Which of the following objects are usually sectioned?
A) gaskets
B) bolts
C) gear teeth
D) webs
E) none of the above
Q3) General section lines ____.
A) are evenly spaced
B) are also the coded section lines for cast iron
C) are not commonly used
D) both a and b
E) none of the above
To view all questions and flashcards with answers, click on the resource link above. Page 12
Chapter 11: Reading Geometric Dimensioning and Tolerancing
Available Study Resources on Quizplus for this Chatper
129 Verified Questions
129 Flashcards
Source URL: https://quizplus.com/quiz/4267
Sample Questions
Q1) A cylinder is given the dimension Ø18.2/17.8. The feature control frame has one horizontal line as the first element, and "0.1" as the second element. What does this mean?
A) The straightness tolerance is applied to the axis of the cylinder.
B) The MMC is 18.3.
C) The LMC is 17.8.
D) both a and c
E) all of the above
Q2) If a feature is produced at ____, the form is allowed to vary within the geometric tolerance zone.
A) LMC
B) MMC
C) RFS
D) both a and c
E) none of the above
Q3) How is a screw thread used as a datum axis unless otherwise specified, and what do you specify if you do not want the implied definition?
Q4) What are the four characteristics of the form tolerance?
Page 13
Q5) Give the general note that should be found on all based on the ASME Y14.5-2009.
To view all questions and flashcards with answers, click on the resource link above.
Chapter
Available Study Resources on Quizplus for this Chatper
80 Verified Questions
80 Flashcards
Source URL: https://quizplus.com/quiz/4268
Sample Questions
Q1) What are the three types of cams? Which is the most common?
Q2) Some gears have nonintersecting shafts that are at right angles. Which of the following is not in this category?
A) worm gears
B) crossed helical gears
C) bevel gears
D) hypoid gears
E) none of the above
Q3) Uniform accelerated motion is designed to reduce the abrupt change at the beginning and end of a period.
A)True
B)False
Q4) Bevel gears are similar to hypoid gears in that the gear shaft axes in both types intersect.
A)True
B)False
Q5) Splines are usually stronger than keyways and keys.
A)True
B)False
Q6) Describe the A, B, and C gear hubs.
Page 14
To view all questions and flashcards with answers, click on the resource link above.
Chapter 13: Reading Precision Sheet Metal Prints
Available Study Resources on Quizplus for this Chatper
66 Verified Questions
66 Flashcards
Source URL: https://quizplus.com/quiz/4269
Sample Questions
Q1) List five common sheet metal seams.
Q2) Cutting material away from a corner can relieve the internal stress brought on by two edges being bent in the same direction.
A)True
B)False
Q3) Bend relief is typically added to a sheet metal part to relieve stress, or the tear, that occurs when a portion of a piece of material is bent.
A)True
B)False
Q4) A double bend is a bend between two parallel faces that are coplanar. The term coplanar means flat surfaces lying on the same plane.
A)True
B)False
Q5) Describe the practice of showing the part in its bent form and in flat pattern on a print.
Q6) This is a stamping press operation that forms a single-line cut partway across the sheet without removing material.
Q7) Describe Punch ID, including how punch ID features are located on a print.
To view all questions and flashcards with answers, click on the resource link above. Page 15
Chapter 14: Reading Prints of Working Drawings
Available Study Resources on Quizplus for this Chatper
87 Verified Questions
87 Flashcards
Source URL: https://quizplus.com/quiz/4270
Sample Questions
Q1) Which branch of a company can request engineering changes to prints?
Q2) Machining processes and other specifications are generally given on assembly prints.
A)True
B)False
Q3) Typically associated with products that are made of structural steel, ____ are used for fabrication and assembly.
A) pictorial assembly
B) general assembly
C) subassembly
D) detail assembly
E) none of the above
Q4) Assembly prints are generally pictorial illustrations.
A)True
B)False
Q5) Detail assemblies are typically associated with cabinetry, or products that are made of structural steel.
A)True
B)False
Q6) What purpose do dimensions serve on an assembly print?
Page 16
To view all questions and flashcards with answers, click on the resource link above.
Chapter 15: Welding Processes and Reading Welding
Representations
Available Study Resources on Quizplus for this Chatper
93 Verified Questions
93 Flashcards
Source URL: https://quizplus.com/quiz/4271
Sample Questions
Q1) If a joint is to have a 1/2" fillet welds 3" long with 12" weld pitch, what will the welding symbol be?
A) The rectangular fillet welding symbol has a notation of 1/2 on the left side of the triangle, and a notation of 312 on the right side of the triangle.
B) The triangular fillet welding symbol has a notation of 1/2 on the left side of the triangle, and a notation of 3-12 on the right side of the triangle.
C) The triangular fillet welding symbol has a notation of 1/2 on the right side of the triangle, and a notation of 312 on the left side of the triangle.
D) The triangular fillet welding symbol has a notation of 1/2 on the left side of the triangle, and a notation of 312 on the right side of the triangle.
E) none of the above
Q2) Welding is a process of joining two or more pieces of like metals by heating the material to a temperature high enough to cause softening or melting.
A)True
B)False
Q3) ____________________ is a trademark of the Union Carbine Corporation.
To view all questions and flashcards with answers, click on the resource link above. Page 17
Chapter 16: Reading Prints of Pictorial Drawings
Available Study Resources on Quizplus for this Chatper
61 Verified Questions
61 Flashcards
Source URL: https://quizplus.com/quiz/4272
Sample Questions
Q1) The most common form of isometric drawing is the ____.
A) long-axis isometric
B) reverse isometric
C) coordinate isometric
D) regular isometric
E) none of the above
Q2) ____ reflects the experience of objects appearing smaller the farther away they are.
A) Cavalier oblique drawing
B) Cabinet oblique drawing
C) General oblique drawing
D) Perspective drawing
E) none of the above
Q3) Isometric drawings are never dimensioned.
A)True
B)False
Q4) Describe exploded assembly drawings, including information about connection lines, balloons, and parts lists.
Q5) What are the most common forms of pictorial drawing used on engineering prints?
Page 18
Q6) Completely describe an explode assembly and its use.
To view all questions and flashcards with answers, click on the resource link above.
Chapter 17: Reading Electrical Diagrams and Schematics
Available Study Resources on Quizplus for this Chatper
70 Verified Questions
70 Flashcards
Source URL: https://quizplus.com/quiz/4273
Sample Questions
Q1) The ____________________, also known as_____________________, are used for fabrication, quality control, and troubleshooting of the wiring of electrical circuits and systems. A highway wiring diagram is a simplified or condensed representation of a point-to-point interconnecting wiring diagram, and can be used when it becomes difficult to draw individual connection lines because of diagram complexity or when it is not necessary to show all of the wires between terminal blocks.
Q2) Which of the following is not included in a parts list?
A) quantity of a part
B) part number
C) item identification keyed to the assembly
D) electronic designations for components
E) none of the above
Q3) The uniformity of symbols within a print is not critical to the final layout.
A)True
B)False
Q4) The ____________________ is a type of schematic that shows all of the interconnections of the system components, and often referred to as point-to-point interconnecting wiring diagrams.
Q5) DC refers to what?
To view all questions and flashcards with answers, click on the resource link above. Page 19