Building Materials and Methods
Final Exam Questions
Course Introduction
This course provides a comprehensive introduction to the selection, properties, and applications of building materials commonly used in construction projects, such as wood, concrete, steel, masonry, and advanced composites. Students will explore the fundamental physical and mechanical characteristics of each material, examine sustainability considerations, and learn about various construction techniques and methods associated with their effective use. Emphasis is placed on understanding how material choices impact structural integrity, environmental performance, and project costs, as well as integrating new technologies and best practices in material handling and installation. Through lectures, hands-on activities, and case studies, students will gain both theoretical knowledge and practical skills essential for making informed decisions in the construction industry.
Recommended Textbook
Residential Construction Academy Carpentry 4th Edition by Floyd Vogt
Available Study Resources on Quizplus
20 Chapters
600 Verified Questions
600 Flashcards
Source URL: https://quizplus.com/study-set/2142
Page 2
Chapter 1: Hand Tools
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42665
Sample Questions
Q1) The ____ square consists of a movable blade, 1 inch wide and 12 inches long, that slides along the body of the square.
A)combination
B)speed
C)framing
D)bevel
Answer: A
Q2) ____ is the technique of driving nails at an angle to fasten the end of one piece to another.
A)Face nailing
B)Skewed nailing
C)Side nailing
D)Toenailing
Answer: D
Q3) The carpenter's ____ is used to test both level and plumb surfaces.
A)rule
B)level
C)plumb bob
D)steel tape
Answer: B
To view all questions and flashcards with answers, click on the resource link above. Page 3
Chapter 2: Hand Power Tools
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42666
Sample Questions
Q1) Brad nailers are used to fasten thin materials.
A)True
B)False
Answer: True
Q2) Hammer drills are best suited drilling into wood.
A)True
B)False
Answer: False
Q3) The size of a portable electric circular saw is determined by the diameter of the blade.
A)True
B)False
Answer: True
Q4) Drill bits designed to cut fast holes in wood are called __________.
Answer: Speed (spade) bits
Speed bits
Spade bits
Q5) A electrical tool designed to replace the bench plane is called __________.
Answer: power plane
To view all questions and flashcards with answers, click on the resource link above. Page 4
Chapter 3: Stationary Power Tools
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42667
Sample Questions
Q1) When ripping a narrow strip a(n) __ is used to safely finish the cut.
A)push stick
B)miter gauge
C)rip fence
D)anti-kick back device
Answer: A
Q2) Small turning radii while using a band saw requires the use of 3/4" bands.
A)True
B)False
Answer: False
Q3) A tool designed to make accurate repetitive holes in material is called __________.
Answer: drill press
Q4) Shapers are used to prepare rough material with ripping and cross cutting operations.
A)True
B)False
Answer: False
Q5) A band saw band is held in proper position by __________.
Answer: guide blocks and wheels
To view all questions and flashcards with answers, click on the resource link above. Page 5
Chapter 4: Wood and Wood Products
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42668
Sample Questions
Q1) ____ veneer lumber is intended for use as high-strength, load-carrying beams to support the weight of construction over window and door openings, and in floor and roof systems of residential and light commercial wood frame construction.
A)Hardwood
B)Laminated
C)Oriental
D)Fibrous
Q2) A 2x6-10' board has the same board feet as a 1x12-10'.
A)True
B)False
Q3) The long, narrow surface of a piece of lumber is called its ____.
A)side
B)end
C)edge
D)width
Q4) Engineered lumber products consume less wood and can be made from smaller trees than traditional lumber.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above. Page 6
Chapter 5: Fasteners
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42669
Sample Questions
Q1) Sheet metal screws are used for fastening thin metal.
A)True
B)False
Q2) Steel nails coated with ____ are called galvanized nails.
A)copper
B)zinc
C)aluminum
D)nickel
Q3) ____ anchors have an unthreaded hole into which a wood or sheet metal screw is driven.
A)Hammer drive
B)Aluminum drive
C)Nylon nail
D)Lead
Q4) Construction adhesive cannot be used in cold weather.
A)True
B)False
Q5) Duplex nails are used when extra holding power is needed in trim work.
A)True
B)False
Page 7
To view all questions and flashcards with answers, click on the resource link above.
Chapter 6: Building Plans and Codes
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42670
Sample Questions
Q1) A ____ schedule gives information on the kind of finish material to be used on the floors, walls, and ceilings of the individual rooms.
A)window
B)door
C)panel
D)finish
Q2) The most commonly used scale found on blueprints is ____ inch equals 1 foot.
A)1/16
B)1/8
C)1/4
D)1/2
Q3) ____ are small parts drawn at a very large scale.
A)Refinements
B)Elaborations
C)Details
D)Expansions
Q4) Symbols on a set of prints may be used to identify the material being specified.
A)True
B)False
Q5) The boldest line on a drawing is the __________ line.
Page 8
To view all questions and flashcards with answers, click on the resource link above.
Chapter 7: Building Layout
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42671
Sample Questions
Q1) A(n) ____ is a device that releases a narrow beam of light.
A)oscilloscope
B)telescope
C)laser
D)lab scope
Q2) The vertical cross hair of a telescope is helpful to measure vertical angles with a builders level.
A)True
B)False
Q3) Convert 24'- 5" to feet in decimal form.
Q4) What is the diagonal of a rectangle that measures 12'- 2" x 14'- 11"? Answer in decimal form.
Q5) Dry buildings are easier to heat than damp ones.
A)True
B)False
Q6) What is the diagonal of a rectangle that measures 24'-3" x 28'-9"? Answer in decimal form.
Q7) Convert 32'- 10" to feet in decimal form.
Q9) Convert 6.3452345' to feet-inches to the nearest sixteenth. Page 9
Q8) Convert 35.9685734' to feet-inches to the nearest sixteenth.
To view all questions and flashcards with answers, click on the resource link above.
Page 10
Chapter 8: Concrete Form Construction
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42672
Sample Questions
Q1) ____ are materials added to a concrete mix to achieve certain desired qualities.
A)Aggregates
B)Admixtures
C)Particulates
D)Condensates
Q2) If concrete is moist-cured for 7 days, its strength is up to about ____ percent of full strength.
A)60
B)75
C)85
D)95
Q3) Where necessary, to prevent heat loss through the floor and foundation walls, ____made of extruded polystyrene is installed under the concrete slab.
A)a vapor barrier
B)rigid insulation
C)a seal
D)tarpaulin
To view all questions and flashcards with answers, click on the resource link above.
11
Chapter 9: Floor Framing
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42673
Sample Questions
Q1) A ____ formed in the foundation wall usually supports the ends of a girder.
A)seal
B)cap
C)plate
D)pocket
Q2) In a balloon frame, the studs run from sill to ____.
A)plate
B)sheathing
C)girder
D)ribbon
Q3) All the techniques used for the prevention of termite attack are based on keeping the wood in the structure ____ and making it as difficult as possible for termites to get to the wood.
A)dry
B)moist
C)fire-proof
D)load-free
Q4) Floor joists sit directly on the columns and posts.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above. Page 12
Chapter 10: Wall and Ceiling Framing
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42674
Sample Questions
Q1) Horizontal application of steel furring channels on walls is preferred.
A)True
B)False
Q2) ____ is used to provide support for later fastening of trim or fixtures.
A)Molding
B)Bounding
C)Curbing
D)Backing
Q3) In a conventionally framed roof, the rafters and the ceiling joists form a ____.
A)triangle
B)square
C)pentagon
D)hexagon
Q4) In some locales, wind and seismic forces require the use of a(n) ____ to improve the lateral (side-to-side) strength of an exterior wall.
A)shearwall
B)embankment
C)buttress
D)abutment
To view all questions and flashcards with answers, click on the resource link above. Page 13
Chapter 11: Scaffolds, Ladders, and Sawhorses
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42675
Sample Questions
Q1) In a metal scaffold, ____ rigidly connect one scaffold member to another member.
A)baseplates
B)mud sills
C)cross braces
D)end frames
Q2) Means of access onto a scaffold include a hook-on or attachable ladder, a ramp, or a(n) ____ and are determined by the competent person on the job.
A)stair tower
B)stack of concrete blocks
C)adjacent scaffold
D)earthen mound
Q3) All scaffolds and their components must be capable of supporting, without failure, their own weight and at least ____ times the maximum intended load applied or transmitted to them.
A)four
B)five
C)six
D)seven
To view all questions and flashcards with answers, click on the resource link above. Page 14
Chapter 12: Roof Framing
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42676
Sample Questions
Q1) The most common roof style is the ____ roof where two sloping roof surfaces meet at the top.
A)gable
B)shed
C)hip
D)intersecting
Q2) Valley rafters are more similar than they are different to hip rafters..
A)True
B)False
Q3) The unit of run for both hip rafters and valley rafters is ____ inches.
A)12
B)16.97
C)18.44
D)24
Q4) The mansard roof is a combination of the gambrel and hip roofs.
A)True
B)False
Q5) Span of a building is the same as the run of the building. A)True
B)False
Page 15
To view all questions and flashcards with answers, click on the resource link above.
Chapter 13: Windows and Doors
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42677
Sample Questions
Q1) The bottom member of a door frame is called a sill or ____.
A)base
B)rest
C)stool
D)stile
Q2) ____ windows have a curved top or head that make them well suited to be joined in combination with a number of other types of windows or doors.
A)Elliptical
B)Arch
C)Oval
D)Circular
Q3) Double-hung windows are twice as large as single hung windows.
A)True
B)False
Q4) Windows should be installed to be airtight as well as watertight.
A)True
B)False
Q5) The sash is a frame in a window that holds the glass.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above. Page 16
Chapter 14: Roofing
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42678
Sample Questions
Q1) Roof valleys are especially vulnerable to leakage.
A)True
B)False
Q2) ____ valley involves applying asphalt shingles on both sides of the valley and alternately weaving each course over and across the valley.
A)Integrated
B)Woven
C)Extended
D)Spun
Q3) ____ flashings are individual metal pieces tucked between courses of shingles.
A)Unit
B)Integral
C)Temporary
D)Step
Q4) The ridge ____ is applied after both sides of the roof have been shingled.
A)seal
B)cap
C)coating D)course
To view all questions and flashcards with answers, click on the resource link above. Page 17
Chapter 15: Siding and Decks
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42679
Sample Questions
Q1) Each linear foot of deck railing must be strong enough to resist a pressure of ____ pounds per square foot applied horizontally at a right angle against the top rail.
A)20
B)25
C)30
D)35
Q2) Deck fasteners should be electroplated galvanized for weather resistance.
A)True
B)False
Q3) The snub cornice has a rafter overhang.
A)True
B)False
Q4) Once siding is laid out for the desired exposure, the layout is transferred to other locations with a ____.
A)chalk line
B)story pole
C)tape measure
D)yardstick
To view all questions and flashcards with answers, click on the resource link above. Page 18
Chapter 16: Insulation and Ventilation
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42680
Sample Questions
Q1) Air is what makes most insulations work well as insulation.
A)True
B)False
Q2) ____ insulation is supplied in bags or bales and placed by pouring, blowing, or packing by hand.
A)Reflective
B)Rigid
C)Flexible
D)Loose-Fill
Q3) Heat transfer caused by fluid movement is called __________.
Q4) If insulation looks neat it is mostly installed correctly.
A)True
B)False
Q5) The location of a house which loses the most heat is ______.
A)windows
B)walls
C)air leakage
D)ceiling and roof
Q6) The material installed above fiberglass insulation at the eave to allow air movement is called __________.
Page 19
To view all questions and flashcards with answers, click on the resource link above.
Chapter 17: Wall Finish
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42681
Sample Questions
Q1) When driving drywall fasteners it is important not to break the paper surface.
A)True
B)False
Q2) Ceiling joists are sometimes brought into alignment with the installation of a ____ across the tops of the joists near the center of the span.
A)ridge board
B)rafter
C)strongback
D)collar tie
Q3) Horizontal application of board paneling requires blocking to be installed between the studs.
A)True
B)False
Q4) The typical width of drywall boards is__ feet.
A)4
B)8
C)12
D)8, 9, 10, 12, 14, & 16
Q5) Drywall beads are cut to length with __________.
Q6) The first sheet of drywall installed in a room are on the __________.
Page 20
To view all questions and flashcards with answers, click on the resource link above.
Chapter 18: Interior Finish
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42682
Sample Questions
Q1) One head of the heavy hammer used with a power nailer is ____ and the other is steel.
A)rubber
B)plastic
C)wood
D)aluminum
Q2) A suspended ceiling system consists of panels that are laid into a metal grid.
A)True
B)False
Q3) Coped joints are performed on outside miters.
A)True
B)False
Q4) Flooring is blind nailed by driving nails at about a ____-degree angle through the flooring.
A)15
B)30
C)45
D)60
To view all questions and flashcards with answers, click on the resource link above.
Page 21
Chapter 19: Stair Framing and Finish
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42683
Sample Questions
Q1) The router used with a stair template must be equipped with a straight bit.
A)True
B)False
Q2) The International Building Code (IBC) specifies that the height of a riser shall not exceed 7 3/4 inches and that the width of a tread not be less than ____ inches.
A)10
B)12
C)14
D)16
Q3) Platform stairs are built by first erecting the ____.
A)bottom riser
B)bottom run
C)platform
D)header
Q4) Tread ____ is installed under the overhang of the tread and against the riser.
A)nosing
B)molding
C)housing
D)casing
To view all questions and flashcards with answers, click on the resource link above. Page 22
Chapter 20: Cabinets and Countertops
Available Study Resources on Quizplus for this Chatper
30 Verified Questions
30 Flashcards
Source URL: https://quizplus.com/quiz/42684
Sample Questions
Q1) When installing ____ hinges, first screw the hinges on the door.
A)dovetail
B)concealed
C)continuous
D)friction
Q2) The leaves of a ____ hinge are set into gains in the edges of the frame and the door, in the same manner as for entrance doors.
A)butt
B)counter-flap
C)coach
D)tee
Q3) In a cabinet installation, the drawer type should match the door type.
A)True
B)False
Q4) Pieces of laminated adhered with contact cement may be easily adjusted into position after the glued surfaces touch.
A)True
B)False
To view all questions and flashcards with answers, click on the resource link above. Page 23