Note: Use Bookmarks panel to navigate
Product: WHEEL LOADER
Model: 982M WHEEL LOADER K1Y
Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly 980M and 982M Wheel Loaders
i05292929
Aftercooler - Remove and Install SMCS
Removal Procedure
Start By:
This is the sample of the manual
Click on the download link for complete manual
Installation Procedure
Copyright 1993 - 2022 Caterpillar Inc. All Rights Reserved.
Private Network For SIS Licensees. Thu Apr 14 19:45:55 UTC+0530 2022
Product: WHEEL LOADER
Model: 982M WHEEL LOADER K1Y
Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly 980M and 982M Wheel Loaders
Media Number -UENR3093-03
Air Cleaner - Remove and Install
Removal Procedure
Always service the air cleaner from the right fender only. DO NOT stand on the undercarriage, belt, or ground to service the air cleaner. Personal injury could result.
-10/10/2017
i06838061
Installation Procedure
Product: WHEEL LOADER
Model: 982M WHEEL LOADER K1Y
Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly 980M and 982M Wheel Loaders
i05288038
Air Control Valve - Remove and Install - ARD Combustion, Clean Emissions Module
Removal Procedure
Installation Procedure
Copyright 1993 - 2022 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Apr 14 19:43:33 UTC+0530 2022
Product: WHEEL LOADER
Model: 982M WHEEL LOADER K1Y
Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
980M and 982M Wheel Loaders
Alternator - Remove and Install SMCS
Removal Procedure
Personal injury can result from failure to disconnect the battery.
First, disconnect the negative battery cable. Then, disconnect the positive battery cable.
A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.
i05283350
Installation Procedure
Product: WHEEL LOADER
Model: 982M WHEEL LOADER K1Y
Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly 980M and 982M Wheel Loaders
Batteries - Remove and Install
Removal Procedure
Accidental machine starting can cause injury or death to personnel working on the machine.
To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.
Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
i05299979
Product: WHEEL LOADER
Model: 982M WHEEL LOADER K1Y
Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly 980M and 982M Wheel Loaders
i05283333
Belt Tensioner - Remove and Install
Removal Procedure
Note:
Installation Procedure
Copyright 1993 - 2022 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Product: WHEEL LOADER
Model: 982M WHEEL LOADER K1Y
Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly 980M and 982M Wheel Loaders
Clean Emissions Module - Remove and Install
Removal Procedure
Hot
Wear goggles, gloves, protective clothing, and a National Institute for Occupational Safety and Health (NIOSH) approved P95 or N95 half-face respirator when handling a used Diesel Particulate Filter or Catalytic Converter Muffler. Failure to do so could result in personal injury.
